Which ceiling is suitable for the kitchen? Which ceiling is better to make in the kitchen? Materials for finishing the ceiling in the kitchen. PVC stretch ceilings

When choosing a good ceiling covering for the kitchen, the technical and aesthetic characteristics of the room are considered, because perfect kitchen This is not only modern technology and a new set, but also beautiful ceilings. The ceiling in the kitchen is the first to absorb all the soot, humidity and fumes. That's why Special attention depends on what material it is made of.

Surface material

Before choosing, it is necessary to study the various properties of the selected surface. The covering for the room must have the following characteristics:

  • Increased moisture resistance and wear resistance.
  • Ease of use.
  • Ability to hide small irregularities.
  • Environmental friendliness.
  • Attractive and affordable price.

It must be taken into account that the humidity in this room is no less than in the bathroom. When cooking, steam is not removed immediately. And all negative factors are reflected on the ceiling.

The formation of smoke and grease cannot be avoided in the kitchen, even if effective ventilation is installed or. Cooking with gas increases the amount of soot.

Pre-activated ventilation above the stove during cooking will make the heating of the ceiling surface uniform and the air will be cleaner.

Plastered ceiling: advantages and disadvantages

Plaster is an economical surface option. The material is not subject to strong changes in humidity and temperature. Its advantages:

  • Eco-friendly raw materials.
  • Fire resistance.
  • Elimination of unevenness and defects in the ceiling.
  • Financial benefit.

With all its advantages, plaster has some negative points:

  • Labor-intensive work process.
  • Difficulty in operation - it is problematic to remove dirt and soot.

The plastered ceiling is used in further work: painting or whitewashing the surface.

Whitewashing and painting

Whitewashing is a simple and inexpensive type of finishing of the ceiling surface. Chalk is used - whiteness and freshness, or lime (bactericidal properties).

The advantages of application are low cost and ease of repair. Required Tools: bucket, brush, newspapers or film to protect furniture and floors.

The disadvantages are various factors:

  • Frequency of re-whitewashing - dirt cannot be washed off from this ceiling.
  • Same appearance.
  • The formation of material deposits over time - the whitewash is removed again along with the plaster, which leads to a large amount of work.

If the kitchen ceiling is fairly flat, then it can be painted with water-based paint. It will give a nice matte finish.

How to paint the ceiling correctly.

The surface is easy to care for, the paint can be washed. Due to the thin layer of material, the formation of sagging will not occur soon.

When painting the ceiling, use a roller rather than a brush. The surface will be smoother.

Wallpaper

Often the ceiling in the kitchen is covered with wallpaper. First, the surface is leveled and the joints are sealed. The undoubted advantage of the material:

  • Ease of operation.
  • Hiding minor defects.

Wallpaper on the ceiling – inexpensive way transform the kitchen.

With all the positive aspects of a stretch ceiling, there are also disadvantages:

  • The height of the kitchen is reduced by 10 cm.
  • High price compared to other materials.
  • If damaged, the entire system is replaced.
  • Installation requires special equipment.

Matte canvas is used for the kitchen. There are no visible grease stains on it.

Plasterboard ceiling: pros and cons

Drywall is a universal material, applicable for various finishing works Oh. With its help, a single-level (hard) ceiling or a multi-level (floating) suspended surface is made. Used for painting.

Pros of use:

  • Leveling the ceiling using plasterboard sheets. You don't have to remove the old whitewash.
  • Effective camouflage of communications.
  • Application of any type of lamp.
  • Easy to install and dismantle.

Drywall is a plastic material. Any surface shape can be made from it.

Considering all the features and competent installation(on special sheathing) structures, drywall will become a durable and functional ceiling covering.

Disadvantages of drywall:

  • Low moisture resistance - when installing the material in the kitchen, a powerful hood is required.
  • Inability to retain water - when wet, the ceiling is completely replaced.
  • Reducing the height of the room by 15 cm.
  • Deformation of the substance, fading of color.
  • Not suitable for new buildings - the building will shrink over time and the ceiling surface will begin to crack.

To paint the material, acrylic paint is used, not emulsion paint. This will allow you to remove grease from the surface with detergents.

Two-level, make hanging

Two-level designs are carried out by tension method and are made of plasterboard. Installation from sheets is easier than installation from vinyl.

The multi-level ceiling highlights different zones, focuses attention on parts of the room.

The surface has its advantages:

  • Style and aesthetics.
  • Disguise - the composition will hide communication.
  • Use any image and background - from a plant to your own photo.
  • High noise insulation.
  • Visual increase in area.
  • Quick installation.

When installing the tensioner two-level ceiling no need for perfect plastering. The canvas will create a smooth surface. There are many different shades to choose from.

The ceiling is easy to clean and simple to install. Using a multi-level ceiling, you can hide ventilation or electrical wiring in the kitchen.

For more information about this, see the video instructions:

Slatted ceilings look stunning. The kitchen will be radically transformed

There are three types of slatted surfaces:

  • Open type - there are gaps between the lines. Installed in rooms with high walls.
  • Closed type - without inserts, the surface is smooth.
  • Seamless panels - surface with minimum size joint, creating the feeling of a one-piece fabric.

The slats are perfect for the kitchen area. They have a number of advantages:

  • Durable and easy to care for.
  • The panels are antistatic.
  • Not subject to temperature changes.
  • Hide ceiling imperfections.
  • Non-flammability.
  • Environmental friendliness.

The only drawback is that the panels significantly reduce the height of the room.

In any case, when choosing material for the ceiling in the kitchen, the nuances of the food preparation room are taken into account: the presence of a ventilation system, the height of the walls, the area of ​​the room.

Choosing a ceiling for the kitchen is an extremely important matter. We spend a lot of time in the kitchen, there is always a lot of activity here, and we want the walls, appliances, stools with a table, and the ceiling to be the most beautiful. But moisture, grease, soot and endless drafts will sooner or later reach the most resistant coating, so when kitchen renovation There simply shouldn’t be any small things. It’s easy to get confused among the types of materials for construction purposes, so many people are tormented by the question - how to make a ceiling in a brand new kitchen?

The kitchen in the average apartment is a high-risk area.

When choosing which ceiling to give preference to in the kitchen, you need to take into account several factors:

  1. Moisture resistance. Along with the bathroom, the dining room is the place where there is constant water vapor; in addition, these two rooms are most often flooded by “good” neighbors. Therefore, the coating should easily withstand water tests.
  2. Easy cleaning. Soot and grease from soups and delicious pancakes are a common occurrence in the home, so it is important that the ceiling covering can always be easily washed and cleaned.
  3. The ability to hide the shortcomings of the old ceiling - stains from former flooding, cracks, unevenness, unsightly ventilation grilles.
  4. Wear resistance - any ceiling is not installed for a year or even 5 years, so the coating must withstand harsh conditions well kitchen conditions and not lose its presentation.
  5. Environmentally friendly and safe for the health of all family members.
  6. Beauty and matching the interior. If you have a sophisticated dining room in the Art Nouveau style, cheap polystyrene foam tiles will be out of place, and soft Provence will not appreciate multi-level ceilings in flashy colors.

Today, there are more than a dozen different types of ceilings for kitchens, and each of them has its own advantages and disadvantages. Let's look at the most popular and practical options.

Plastering

When deciding which kitchen ceiling is the best, when renovating, most people still give preference to the good old classics - a white plastered surface. This coating has many advantages, but it also has its own nuances.

Pros:

  • environmental friendliness: putty and plaster are completely safe for health and do not emit any toxins or toxic fumes. For allergy sufferers in the kitchen - the optimal solution;
  • beauty and rigor - during surface treatment all bulges, cracks and pits disappear - the result is a perfectly smooth, uniform coating;
  • when plastering the room does not lose height - for apartments with very low ceilings and with small kitchenettes this factor is especially important;
  • If desired, such a surface can be decorated with moisture-resistant wallpaper for painting, which will allow it to adapt to almost any interior style.

Of the minuses:

  • this is a very labor-intensive work in several stages: the surface needs to be leveled, primed, covered with putty, and only then - with plaster;
  • if you live in a new building, you need to make allowances for the fact that at first the house will “walk” - due to shrinkage, cracks and crevices may appear on the fresh covering;
  • plaster can hardly be called practical; it is very sensitive to dirt: if stains appear on the ceiling (or traces of water after a slight flood), the repair will have to be repeated.

Painting

Painting your kitchen ceiling is a great option if the surface is fairly smooth. The main thing is to buy a quality washable repair product.

Pros:

  • moisture-resistant coating can be easily washed;
  • It is possible to choose paint for the kitchen in different shades to suit different styles;
  • this type of repair is quite durable;
  • The painting process itself will take no more than 2-3 hours, and within a day the ceiling will be completely ready.

Of the minuses:

  • if the coating is uneven, you will have to spend time leveling and puttying;
  • It is important to follow the painting technology and apply 3 layers in different directions so as not to end up with stains on the new ceiling.
  • If the paint is chosen incorrectly, cracks may appear due to temperature changes.

Wallpaper

Washable wallpaper for kitchen ceilings is a fairly budget option and an opportunity to implement various design ideas ceiling. Today, this option for the kitchen is being chosen more and more often.

Pros:

  • more simple technology compared to painting and whitewashing;
  • variety of textures and shades;
  • easy to wash and clean (if you choose the wallpaper correctly);
  • will help hide the unevenness of the ceiling, in particular when settling a new house.

Of the minuses:

There are practically none, problems will arise only if you buy ordinary paper wallpaper for the ceiling: with high humidity and drafts, they can peel off at the top.

Expanded polystyrene tiles

Inexpensive and attractive polystyrene foam tiles have already reached the peak of fashion, but many still stop at this option when deciding what kind of ceiling to make in the main room.

Pros:

  • this tile is the best cheap option: sq. a meter of coating will cost 50-70 rubles;
  • ceiling decoration polystyrene foam tiles- the task is quite simple, which the most inexperienced repairman can handle;
  • expanded polystyrene can hide the most terrible defects - if there is neither the opportunity nor the desire to level the surface, this is an ideal option.

Of the minuses:

  • simple polystyrene foam ceilings have limited design applications: such a ceiling covering looks harmonious, for example, in a “classic” or “retro” style;
  • an inexpensive ceiling easily attracts dirt and grease: if you try to whitewash the tiles, the pattern will no longer be so elegant and bright.

Slat and plastic ceilings

Coverings made of slats and PVC panels are almost the most popular types of ceiling for a dining room today. These materials have a lot of advantages and virtually no disadvantages.

Pros:

  • huge selection of colors and textures for different designs and for any owner's taste;
  • easy installation:
  • the ability to hide not only serious ceiling defects, but also various communications;
  • you can arrange interesting soft lighting for the ceiling - lamps can be easily built in here;
  • this is a very practical ceiling option - any dirt can be removed with a damp cloth;
  • In its original form, such coating will last at least 10 years.

Of the minuses:

  • plastic ceilings reduce the height of the room by 10 centimeters - for small kitchens this can become a serious problem;
  • classic white panels can give a cozy kitchen a slightly formal look.

Today in stores you can find quite unusual material For ceiling repair: tiles different types: pressed, extruded, laminated, injection.

Pros:

  • simple installation;
  • different designs and textures that allow you to mount a solid ceiling without visible boundaries between the tiles;
  • a significant difference in price, allowing you to choose both budget and luxury options.

Of the minuses:

  • some types of tiles cannot be painted or whitened if they become dirty;
  • In order for the material to lie tightly, the surface must be leveled.

Drywall

Plasterboard (or false) ceilings are most often made by those people who dream of implementing the most daring interior ceiling ideas in the dining area.

Pros:

  • under the drywall you can hide any ceiling “jambs”, ventilation holes, wires;
  • from this material you can mount the most complex designs: two-, three-level, curved, plasterboard is also ideal for creating the most unusual ceiling lighting: light can fall up, down, sideways, at different angles;
  • plasterboard coating requires mandatory coverage: wallpaper, plaster, paint - this will also give the ceiling the most unusual look.

Of the minuses:

  • complex installation and materials for “plasterboard” repairs can cost a pretty penny;
  • both multi-stage and regular plasterboard ceilings significantly reduce the height of the kitchen.

Stretch ceiling

Stretch ceilings in the kitchen are the choice of those who want to get the most spectacular and unique kitchen. This coating is at the height of fashion today, and every year there are more and more supporters of suspended kitchen ceilings.

Pros:

  • tension covering provides limitless ideas for decorating the ceiling: matte and glossy, mirror and classic, plain or with a spectacular pattern - you can choose anything;
  • such a ceiling covering is resistant to temperature changes, any dirt, dust and water: it will withstand even a terrible flood from neighbors above;
  • tension materials are completely harmless and do not release any hazardous substances into your kitchen;
  • you don’t have to level the ceiling, quietly hide the wires and all communications;
  • The service life of a tension miracle is at least 10-15 years.

Of the minuses:

  • high price;
  • instability to mechanical damage: if the coating is torn or caught by something sharp, it will have to be replaced entirely;
  • the height of the room will decrease by 10-15 centimeters.

The modern renovation market offers all kinds of ceiling covering options for any buyer. All that remains is to evaluate your financial capabilities, decide which qualities of the future ceiling are most important to you, decide on the design - and choosing the ideal material for the future shelf will not be difficult.

Several decades ago such questions could not even arise. There were only two ways to decorate the ceiling - whitewashing and painting with water-based paint. Today everything is much more complicated. There are several ways to design a ceiling and a wide variety of materials. To answer the question: “Which ceiling is better to make in the kitchen?”, you need to know about all the disadvantages and advantages of certain coatings. We will study them in our article.

Ideal ceiling

Apartment renovations must be taken very seriously. This is especially true for such a complex room as the kitchen. To choose the right finishing material, you need to know what characteristics an ideal kitchen ceiling has. It should be:


It is not easy to select a material that meets all these requirements, but it is possible. Today, there are several ways to decorate the ceiling in the kitchen. Customer reviews indicate that from modern materials it is quite possible to produce high-quality and modern ceiling. These include:

  • plasterboard ceilings;
  • stretch ceiling;
  • structures made of polystyrene foam boards;
  • ceilings covered with wallpaper;
  • painted.

Slat ceilings

They are assembled from individual slats. The design can be open or closed. In the second case, narrow inserts are used that close the gaps between the slats; in the first option, the ceiling is mounted without them. The slats are produced in lengths of 3 and 4 meters. Their width can be different - from 9 to 20 cm. But the most popular are slats with a width of 10 cm.

Advantages of slatted ceilings

  • Moisture resistance.
  • Attractive appearance.
  • Suspended structure (communications can be hidden).

Flaws

  • Reducing the height of the room by 10 cm.
  • Impossibility of partial dismantling.

Plastic ceilings in the kitchen

This solution to the “ceiling” issue has many opponents, but there are also many supporters. Using plastic panels on the ceiling in the kitchen, you can create a very original interior premises. Reviews from apartment owners indicate that this is a very affordable method. The material for it is inexpensive, and installation is quite quick.

This design has very significant drawbacks that cannot simply be ignored. As many designers note, such a ceiling emanates “visual cold” - what looks good in an office is not always suitable for an apartment.

An even more serious drawback is the short service life. Kitchen fumes and soot quickly disfigure the glossy beauty.

Stretch ceiling for the kitchen

The production technology of this model is to stretch PVC film onto metal carcass. A suspended ceiling for the kitchen is just a godsend for designers. It has great aesthetic potential. It can be completely smooth or be a whole cascade consisting of several levels. Given that correct installation, this design has no service life limitation. Stretch ceilings are not afraid of leaks.

Such designs are divided into two categories: standard (having seams) and seamless. The last option is the new kind ceilings made of synthetic fabric (polyester), which has very high strength. In this case, the material can be impregnated with polyurethane on both sides. Seamless stretch fabrics have a width of up to five meters.

Like any structure, a ceiling of this type has disadvantages:

  1. Difficult to install. It is impossible to make such a ceiling with your own hands - special equipment and certain skills in this work are required.
  2. Restrictions on the type and power of lamps that are built into the ceiling - these must be halogen lamps power no more than 35 W.
  3. Difficulty of maintenance - it is quite difficult to remove fat from the surface of the ceiling.

According to reviews from owners, they are quite satisfied with suspended ceilings. Photo (for kitchen with high ceilings) clearly demonstrates that they can become a real work of art.

Painted ceilings

If you are haunted by the question: “What is the best ceiling to make in the kitchen?”, then you should know that painted ceilings are still relevant. Designers recommend making such a ceiling if the height of the room is small. Painting is recommended if the surface is flat and smooth, and also if the intended design does not include suspended structures.

The advantages of such a ceiling include, first of all, ease of manufacture. Modern paints for interior work easy to apply, no unpleasantness, strong smell, so it's easy to work with them.

It is impossible not to note the hygienic properties of such a ceiling - covered with high-quality water-based paint, it “breathes”. If the base surface is prepared perfectly, then when you finish the job you will get a beautiful and tidy surface.

Plaster and whitewash

There is no cheaper way to quickly and efficiently update the ceiling. All you need is a bucket, a brush, water and some lime. However, in this case it is necessary to take into account that you will have to whitewash the ceiling often. Soot and grease cannot be washed off from such a ceiling. Over time, lime deposits will form that will have to be cleaned off.

Ceiling wallpaper

When choosing which ceiling is best for the kitchen, you should consider this option. More recently, this method of decorating the ceiling has been very popular. Of course, we mean washable wallpaper - ordinary paper samples will lose their attractive appearance in just two to three months.

This finish is quite easy to work with and is inexpensive; moreover, thick wallpaper can hide minor surface imperfections. Keep in mind that light, plain samples can only be used on a perfectly flat surface. If you need to hide some small defects, choose wallpaper with a contrasting pattern. It is advisable that there are no symmetrical elements on it.

Vinyl wallpaper is easy to clean with soapy water. However, despite the obvious advantages of such ceilings, there are also serious shortcomings. Washable wallpaper is a rather heavy material. Even when using very high-quality glue, over time they begin to come off, especially where hot fumes rise upward.

Ceiling tiles

When thinking about the question: “Which ceiling is best to make in the kitchen?”, you should not discount such a recently popular method as using polystyrene tiles. Today this method is gradually becoming a thing of the past, although it is still popular due to its very affordable price. Tiles can hide quite significant defects in the ceiling.

The disadvantages of this coating include the porosity of the material, therefore it is not easy to wash. Many people believe that the appearance of such tiles does not meet modern requirements.

We use drywall

This material, beloved by many, helps to avoid difficult plastering works. Enough to cover base ceiling plasterboard, putty it and paint it with good water-based paint. Everything, beautiful and high quality is ready!

Many believe that the disadvantage of this material lies in the complexity of installation (compared to rack or plastic options). You cannot make a plasterboard structure in one day. Therefore, in this case, it is more advisable to seek help from professionals. People with experience in such work will create original design ceiling in the kitchen, which will look very modern.

How much does the ceiling cost?

At the beginning of the article, we said that a weighty argument in favor of a particular coating can be its cost. This is really important, so we will give you average prices (in Moscow) for the most popular ceiling coverings and their installation work.

So, polystyrene ceiling tiles costs from 15 to 25 rubles/m2, its installation costs 130 rubles/m2.

PVC panels will cost on average 180-200 rubles/m2, and the work to install them will cost 300 rubles/m2.

A slatted ceiling will cost a little more: material - 280-300 rubles / m 2, and labor - 300 rubles.

Almost the same amount will be required to make plasterboard ceilings in the kitchen - 200 rubles/m2 (material) and 485 rubles/m2 (labor).

A ceiling covered with wallpaper for painting will cost 452 rubles/m2 (material) and 570 rubles (labor).

Oddly enough, a suspended ceiling will cost less. The cost of the material, which includes the cost of installation, is 840 rubles/m2.

As you understand, these are average numbers. You can choose a more expensive material, and the team of craftsmen, highly appreciating their professionalism, will quote a higher price. But the overall picture is clear, and you can focus on a specific type of coverage.

Ceilings for the kitchen: reviews

According to recent surveys regularly conducted by large construction supermarkets, the majority of buyers want to see suspended ceilings in the kitchen. Their reviews confirm this. In addition, an interesting trend has emerged - suspended ceilings are completely satisfactory for consumers aged 30 to 35 years. The older generation prefers drywall, considering it a reliable and proven material that has been used for many years. The oldest buyers still vote for polystyrene tiles, believing that they can be used to inexpensively update a kitchen ceiling.

If gaps form between the slabs in your house, choose a suspended ceiling, and if you choose the plasterboard option, then it must be covered with fiberglass or glass wallpaper.

New residents who are starting renovations in a newly completed house should take into account that the new building is undergoing a shrinkage process, so when puttingty, fiberglass and sickle should be used.

For a kitchen ceiling, you need to purchase paint from well-known manufacturers, preferably washable.

If you want to do redecorating ceiling that has turned yellow from tobacco smoke or after a leak, then first prime it with a matte alkyd paint. If this is not done, yellow spots may appear on the surface.

If you plan to make side lighting of the ceiling, then the finishing work must be of very high quality.

If you want to make renovations in a retro style using stucco, then it can be successfully replaced by imitation foam or polyurethane.

If a crack appears on the kitchen ceiling, then it would be more advisable to putty and paint the entire ceiling. Otherwise, you will be wasting your time and money.

Well, that’s probably all I would like to say about kitchen ceilings. Probably someone is waiting for us to say at the end of the article what the ceiling in your kitchen should be like. This won't happen. You, only you, can make this choice, which depends on your preferences and financial capabilities.

Choice finishing materials for the kitchen requires a special approach, which is associated with the specific conditions of their use in this room. In particular, it is necessary to take a responsible approach to the choice of material for the ceiling. Therefore, in this article I decided to talk about six modern ceiling materials so that you can consciously decide for yourself which ceilings are best to use in the kitchen.

Material options

First of all, I would like to note that To ceiling decoration The kitchen has higher demands than other rooms.

The coating must have the following qualities:

  • resistance to high humidity and even steam;
  • possibility of wet cleaning;
  • resistance to temperature changes.

Among modern ceiling materials that are popular, the following solutions meet all these requirements:

Option 1: suspended ceilings

Stretch ceilings have recently become very popular, which is due to their modern attractive appearance and a number of good performance qualities, such as:

  • environmental friendliness;
  • resistance to fungi and microorganisms, which is associated with the antiseptic qualities of the canvas;
  • big choice design;

  • resistance to moisture - high-quality suspended ceilings can even protect the room from flooding from above;
  • possibility of wet cleaning using detergents;
  • the minimum distance from the main ceiling to the tension ceiling is 2.5-3 cm.

Tensioners glossy ceilings reflect light, which visually makes the room more spacious and bright. Therefore they are great solution for small kitchens.

It should be noted that stretch ceilings come in two types - fabric and PVC based. For the kitchen it is better to give preference to the latter, as they are more practical.

As for the disadvantages of suspended ceilings, the following points can be highlighted:

  • the installation process requires certain skills, so you won’t be able to do this job efficiently with your own hands;
  • the canvas breaks easily, however, for ceiling material this drawback is not critical.

Stretch ceilings combined with multi-level plasterboard look beautiful and modern.

Below is the cost of some suspended ceiling models:

Option 2: suspended ceilings

Suspended ceilings are no less popular.

They look beautiful and neat, in addition, they also have many advantages:

  1. are practical because they are easy to clean;
  2. installation is quite simple, so every home craftsman can install such a ceiling;

  1. strength is higher than that of suspended ceilings. Moreover, if any part is damaged, it can be replaced.

It must be said that there are two types of suspended ceilings:

  • cassette - the design is based on supporting profiles that are attached to the ceiling on suspensions. In this case, ceiling slabs (cassettes) are laid on the profile.
    The disadvantage of this design is that it significantly reduces the height of the ceiling. The minimum distance from the main ceiling to the surface of the cassettes is 15-25 cm, depending on the model;

  • slatted - the design is based on traverses, on which decorative slats are snapped from below. Like cassette ceilings, slatted ones are attached to the ceiling on suspensions, however, they reduce the height of the room by only 4-7 cm.

It must be said that panels, like slats, are most often made of plastic or aluminum. In addition, mirrored cassette ceilings are available for sale.

Price suspended ceilings quite high, especially for rack structures:

Option 3: Foam ceiling tiles

If you are looking for a cheaper option to make a kitchen ceiling, but without damaging the interior, then the best option is ceiling tiles.

The only thing keep in mind that there are several types:

  • pressed - is the cheapest material (30-40 rubles per square meter), however, it should not be used for the kitchen. The fact is that it gets dirty quickly, and it is not recommended to wash it.

In addition, the appearance of such tiles also, as a rule, leaves much to be desired - its surface is grainy with an unclear pattern. True, these shortcomings can be corrected to some extent by painting;

  • extruded – has a smooth structure and a clear pattern. This tile meets all of the above requirements.
    It should be noted that it can be laminated and painted, which allows you to choose a coating for any interior;

  • injection - its performance characteristics are similar to extruded tiles, therefore it is also suitable for use in the kitchen. Its main feature is its thickness, which often exceeds one centimeter.

In addition to low cost and attractive appearance The following advantages of the material under consideration can be distinguished:

  • the slab minimally reduces the height of the ceiling, so it is perfect for low rooms;

  • has good heat and sound insulation qualities. This is especially true for injection tiles due to their thickness;
  • large selection, which allows it to be used in any interior;

  • the installation process is extremely simple - the tiles are glued to the ceiling using glue or even starting putty;
  • tiles can hide minor surface imperfections.

One of the disadvantages of tiles is flammability. Moreover, during the combustion process, polystyrene foam releases toxins.

Below is the cost various types ceiling tiles:

Option 4: plastic panels

When choosing which ceiling is best to make in the kitchen, it makes sense to pay attention to plastic panels. Most often they are used on walls, however, they can also become an excellent ceiling covering. Moreover, in this case it is not at all necessary to decorate the walls with plastic panels.

I must say that there is a large selection of designs plastic panels allows you to use them in any interior. They can be made in the form of lining, i.e. with visible joints, and in the form of panels that form a continuous covering on the ceiling, as in the photo above. Moreover, their texture can imitate wood or marble.

As for the performance qualities of the panels, they are ideal for use in the kitchen.

In particular, the following points can be highlighted:

  • practicality - the panels are easy to clean, and you can even use detergents for this;
  • do not absorb odors;
  • not subject to biological influences;

  • The installation instructions assume the use of lathing or mounting strips, if the ceiling is flat, the panels can be glued with liquid nails. But, in any case, they slightly reduce the height of the ceiling;
  • The installation process is quite simple, so every home craftsman can cope with the task.

The cost of the panels is quite “democratic”:

Option 5: painting

Painting the ceiling in the kitchen is very popular. Of course, at first glance it may seem that this is the simplest and cheapest finishing method. On the one hand, this is true, but only with a caveat - provided that the ceiling is perfectly flat and smooth.

If the ceiling is uneven, it needs to be leveled.

You can do this in two ways:

  • by plastering;
  • using moisture resistant.

In addition, the surface must be properly puttied and thoroughly sanded before painting. The fact is that after painting, even the smallest flaws become clearly visible. Thus, if the quality of the ceiling is not ideal, painting becomes the most labor-intensive and time-consuming option for finishing it.

As for the choice of paint, you should definitely use polymer water-dispersion compositions (acrylic, silicone, etc.). Moreover, the paint must be moisture resistant.

These paints have a number of advantages:

  • have no smell, as they are made using water based. Accordingly, these paints are the most environmentally friendly;

  • it is possible to give the ceiling any color and shade, since water-dispersion paints are tinted;

  • dry within a few hours;
  • have good durability;
  • form an attractive matte surface on the ceiling.

As for the cost of such paints, they depend on the manufacturer. Below are prices for coatings from some well-known manufacturers on the domestic market:

Here, in fact, are all the types of ceiling materials that I wanted to tell you about.

Option 6: liquid wallpaper

Finally, let's look at one more modern version finishing the kitchen ceiling, which consists of using liquid wallpaper. I would like to note right away that this material has nothing to do with the wallpaper in rolls that we are used to, and in fact is more of a decorative plaster.

Thus, liquid wallpaper is a dry mixture, which usually contains:

  • cellulose;
  • silk and cotton fibers;
  • dyes and fillers that give the coating a particular effect;
  • acrylic dispersion, which serves as a binder, etc.

Before use, the mixture is diluted in water and applied with a spatula, like ordinary decorative plaster. This allows it to be used for finishing multi-level ceilings complex shape.

As for other advantages of liquid wallpaper, we can highlight:

  • environmental friendliness;
  • simplicity and speed of application, however, this material also requires surface preparation;
  • attractive appearance.

It must be said that liquid wallpaper itself is not resistant to moisture. Therefore, in the kitchen they should be varnished. Best suited for these purposes acrylic lacquer water based.

Another disadvantage is the high cost of liquid wallpaper:

Conclusion

Each of the materials described above has its own advantages, so it is impossible to say unequivocally that some coating is better and some worse. Accordingly, everyone must decide for themselves which ceiling to make in the kitchen, depending on the characteristics of the room and interior design.

For many of us, the kitchen is the central room in the house or apartment, where we not only prepare food and eat, but also welcome guests. Traditionally, the kitchen is the face of the home. We are used to assessing the comfort of a home based on the state of the kitchen. The high technology of the kitchen space leaves its mark on the level of design and quality interior decoration. How to make a beautiful ceiling in the kitchen, taking into account design features premises, what technology to use - questions to which you often have to look for answers on your own.

The problem is that, from a functional point of view, not every finishing material will behave appropriately in the kitchen. Kitchen ceiling in this aspect are presented special requirements, considering special conditions operation and high technology kitchen premises. In order to solve the questions posed, let’s consider existing options. Which option in each individual case is more economical, practical and will most accurately emphasize the design features.

Technological features of the kitchen

If there are certain restrictions for interior finishing work in an apartment, then in the kitchen they appear in all their beauty. It is not for nothing that the most expensive materials are used to decorate the kitchen, and the emphasis is on using the most reliable technologies. There is always a complex, unique microclimate in the kitchen. The main reason for this situation is the high intensity of use of the kitchen space and the heavy technological load. Working gas stove provides a high temperature compared to other rooms in the house. Electric stoves work as heating devices, maintaining a high temperature in the room.

On a note: The temperature in the kitchen is on average 2-3 degrees higher than in the rest of the apartment. The humidity in the kitchen sometimes reaches 100%.

Cooking becomes the reason high level humidity in the kitchen. Evaporation includes not only water vapor, but also a number of microelements that settle on all surfaces and on the ceiling inclusive. Fats and carcinogens become integral elements of the kitchen atmosphere. The ceiling in the kitchen becomes a place where the results of our activities and household activities accumulate. Not all surfaces can withstand such loads, not to mention physical properties finishing structures.

In addition to special physical and climate processes, taking place in the kitchen, this room has the highest technological saturation in the house. Gas and electric heating devices, kitchen Appliances, ventilation equipment and lighting concentrated on Not large area. Don’t discount the owners’ desire to install a beautiful and comfortable furniture. All these aspects become decisive in terms of choosing an option. Beauty and functionality are key factors that will have to be considered moving forward.

What decorative options for ceilings in the kitchen can be used?

To a greater extent, the quality of finishing of the kitchen space is influenced by the financial side. Typically, up to 30% of the total budget allocated for apartment renovations is spent on kitchen equipment. However, if with floor covering and the walls, the situation looks quite simple and clear; the lion's amount of funds allocated for repairs will have to be spent on finishing the ceiling. Traditionally, the following types of decor are used to decorate ceilings:

  • whitewashing or painting;
  • wallpapering the ceiling;
  • suspended ceiling systems;
  • plastic structures;
  • slatted ceilings;
  • stretch ceiling.

All of the listed options for finishing the ceiling part are eligible for implementation and, to some extent, allow solving the main problem. Which ceiling is faster and better to make in your kitchen is a question for the inhabitants of the house. If you have the means, pay attention to expensive finishing options and vice versa. If there is a shortage of finances, you can get by budget options finishing of ceilings in the kitchen, which are no less practical, comfortable and aesthetic.

For the kitchen, the practicality of the ceilings is especially important. Intensive use of this room can turn even the most original and expensive design into something gray, dirty and faceless. The ceiling requires constant care. Ceiling structures must be accessible for regular cleaning and cleaning, thanks to which you can extend their service life kitchen interior.

For reference: good ceiling must be cleaned and washed at least once or twice a year. Regular detergents should be suitable for washing ceilings without adding substances and components harmful to human health to the internal atmosphere.

Pros and cons of cheap kitchen ceiling design options

You choose each design option for the ceiling parts for your own kitchen yourself. Here you should not skimp on technology and materials. Each situation puts forward its own technological requirements for ceilings, so we will consider everything possible ways and finishing options.

Whitewash

The easiest way to quickly solve the problem of finishing the ceiling in your own kitchen is to whitewash it. The method is not so popular today due to the lack of high aesthetic properties.

For reference: in countries Western Europe owners of private houses and cottages continue to use whitewash to treat ceiling structures. This is especially noticeable in rural areas, where compliance with sanitary standards and the environment is very important.

To complete the picture, it should be recalled what advantages whitewashed ceilings in the kitchen have. The advantages of this finishing option include:

  • cheapness and availability of material (chalk or lime);
  • simplicity and speed of painting work;
  • environmental Safety whitewashed surface.

The disadvantages of whitewashing include such properties as the rapid soiling of the whitewashed ceiling and inexpressive aesthetic properties. This processing method is suitable for dacha option.

Painting

Along with whitewashing, painting ceilings is also considered the most accessible, fastest and cheapest way to finish ceiling surfaces in kitchen areas. For comparison, a white, painted ceiling in the kitchen will cost three or four times less than plastic structures and even cheaper if we talk about suspended ceiling systems.

A freshly painted ceiling looks fresh and beautiful in the kitchen. For these purposes, water-based or acrylic paints. The latter material is more relevant due to the high manufacturability of the painted surface. paints and varnishes on acrylic base durable and easy to maintain. Acrylic painting is easy to clean from soot and grease deposits. If desired, you can always supplement this finishing option with hanging structures or by changing the color of the painted ceiling, add new notes to the kitchen interior.

The disadvantages of painting are its fragility. Under the influence of high temperatures and high humidity, almost any (acrylic paints are an exception) painted ceiling will begin to crack.

On a note: Water-based paint fades within a year, losing up to 50% of the brightness of its original color.

In addition, painted surfaces are highly susceptible to water. If the apartment is flooded from above, you will have to repaint the entire ceiling. It will not be possible to repair damaged areas locally. What kind of ceiling to make, whitewashed or painted, is up to you. Both options can be considered temporary solutions. Over time, you can improve the design of the ceiling surface in the kitchen through the use of other finishing materials.

Using wallpaper

In parallel with whitewashing and painting, today you can often find ceilings in kitchens covered with washable wallpaper. This is a fairly cheap and quick way to transform own kitchen. Surface defects are easily hidden by new wallpaper, but such a surface is very susceptible to contamination. Cleaning vinyl wallpaper is quite simple. For this purpose, ordinary detergents are used.

Important! In this case, wallpaper must be used only with detergents, vinyl based. Otherwise, your ceiling will soon turn into a dirty stain throughout the entire kitchen.

The disadvantage of this option is the problem of gluing the ceiling itself. Thick wallpaper with glue applied is inconvenient for installation at heights. Constant humidity and heat can cause peeling of wallpaper from the base surface and divergence of seams at the joints.

Summing up the options for cheap finishing of ceilings in the kitchen, we can draw the appropriate conclusion. The listed methods are very convenient for local solution of the problem. When the base surface is in normal condition and traditional ways lighting in the kitchen, whitewashing, painting and wallpapering can be considered acceptable options.

Other ceiling design options

The desire to make a real picture out of the kitchen, a business card of your apartment, brings to the fore more complex and expensive types of design of ceiling surfaces. A new ceiling for your own kitchen, which is better, which is worse - two-level or suspended, depends on your goals and objectives.

Plasterboard ceilings

Suspension systems are the most common today. Using plasterboard for these purposes, you can create the most intricate shapes and configurations on the ceiling. Due to the high technological properties of plasterboard, it becomes possible to implement almost any design solution. There is plenty of room here to decorate the ceilings. By constructing many levels, you can easily solve the problem of zoning the kitchen space and install additional lighting.

Due to suspended structure you can easily hide all the imperfections and defects of the base surface, hide existing communications. This design option is suitable for large kitchen areas.

Important! For suspended ceilings in the kitchen, only moisture-resistant plasterboard is used.

Slat ceilings

You can sew up an old and ugly ceiling in the kitchen with lamellas. when finishing kitchen ceiling surfaces in cottages and country houses. Commonly used wooden slats or combined systems - wood + plastic panels.

Such designs can be open and closed type, with metallic, glossy or matte surfaces. If desired, such ceilings can be made mirrored. Today there are all the conditions to implement this option. Ready-to-assemble slatted ceilings are commercially available today.

Plastic panels are the most affordable and beautiful option

PVC panels have become very popular lately. Due to the variety of shapes and colors, you can create very original, simple and at the same time, very reliable, ceiling structures. Plastic ceiling for the kitchen is:

  • stylish and fashionable;
  • convenient and practical;
  • quite cheap and effective.

On a note: plastic ceiling surfaces waterproof and durable. With normal maintenance, plastic can last 10-15 years without visible deterioration in physical and external properties.

The only problem plastic structures– high degree of flammability. When burned, plastic releases a huge amount of harmful components.

You can install plastic panels yourself by installing additional lamps in parallel in the right places.

Conclusion

Which ceiling is best for the kitchen and for you - decide for yourself. Assess your own financial capabilities and technological need for a particular design option. Tensile structures, despite their visual attractiveness, are a very expensive pleasure. However, for most residents big houses and for estates, this option is quite feasible. From everything listed and written, the following conclusions can be drawn.

Share