Having completed the construction of a house made of timber, you should not think that all the complex work finished. On the contrary, the most interesting things await you ahead! To create a comfortable atmosphere, you will need interior decoration of the house, which requires more detailed attention. And below you will learn how to do the interior decoration of a house made of timber with your own hands, watch training videos and photos, which will allow you to become more familiar with the process.
If you have never encountered such work before, then be prepared for the fact that this is a whole range of activities, which includes:
- laying communications (water supply, heating, electricity, sewerage);
- impregnation wooden walls fire-resistant compounds and antiseptics;
- waterproofing and thermal insulation of floors, walls and ceilings (if necessary);
- subfloor installation;
- installation of partitions and other structures;
- preparation of ceilings, walls, floors decorative cladding(leveling, installation of a frame for fixing the sheathing material);
- finishing of walls, ceilings, floors;
- installation interior doors, lighting fixtures, switches.
It should be noted that interior decoration of a house made of timber with your own hands is a very important task. For this reason, before taking on it, draw up a design project where all the nuances will be spelled out. For example, the location of the electrical network, heating pipes, sewerage, etc.
It is necessary to clearly define all the points discussed above: from rough materials to decorative coatings - their type, quantity, color, cost, texture, etc.
Another important point that is worth knowing is that all wooden buildings shrink. This process should be divided into two main stages:
- Primary shrinkage - usually continues during the first two years as a result of drying of the wood. During this period, the gaps between the beams decrease under the weight of the roof, cracks may form inside and outside the room different sizes. Moreover, the walls and ceiling may shrink by two to three centimeters. As a result, experts do not recommend using rigid structures (for example, plastic panels, drywall) until the shrinkage is completely completed.
- Secondary – associated with fluctuations in temperature and humidity of wood. Usually it is insignificant and most likely will not affect the internal cladding coatings. What kind of interior decoration can a house made of timber look like in the first years after completion of construction? In this case, you should do the following:
- plastering load-bearing structures and cover them with paints and varnishes that protect the wood from rotting and mold;
- make a two-layer subfloor;
- use stretch fabric or leave the ceiling the same.
In any case, we will consider the most popular methods of decorating the floor, ceiling and walls - both for houses that have already shrunk and for those that are in the process of shrinking.
Finish and rough floor
Installation of subfloor
First of all, a subfloor in a home is made from timber. We recommend choosing a double floor structure - it will better conserve heat indoors.
What is a double subfloor? Special logs are made, and insulation with a waterproofing layer (for example, mineral wool) is laid between them. Next, all this is covered with boards, and then comes the finishing floor covering. This is the most economical, simple and effective option in terms of sound insulation and heat conservation.
In the role of finishing flooring V timber houses Typically, the following materials are used:
- Planed tongue and groove board, which has a lot of advantages, of which I would like to highlight the following:
- ecologically pure material, is resistant to moisture and “breathes” (thanks to special impregnations and natural properties);
- durability and strength are another advantage of tongue and groove boards (this floor is easy and convenient to care for);
- modern variations in tinting and surface treatment allow them to harmoniously fit into almost any interior;
- If necessary, the floor covering can be updated by simply sanding the boards or scraping.
- If infrared or water system“warm floor”, then you can forget about floorboard. This is because most of the heat is spent on heating the sheet pile. In this case, parquet boards or laminate are usually used to lay the finished floor.
Do-it-yourself interior decoration of the walls of a timber house: video, photo
As noted above, the interior decoration of walls in such a house involves their careful preparation (insulation, puttying, vapor and moisture insulation), as well as subsequent covering with a finishing coating/material.
Before finishing the walls, answer yourself the following question: “For what purposes is the built house being used?”
If it was built to spend summer holidays and weekends there, you can save on insulation. Otherwise, it will be impossible to live here in winter.
Well, if on the contrary, then it is necessary to insulate the walls. If we talk about finishing the walls, then in this case a huge amount is offered interesting solutions. But when the house is shrinking (the first two years after completion of construction), limit yourself to varnishes, paints or simple stain.
This treatment is, first of all, notable for the fact that the natural texture of the wood is preserved. The tree itself has original patterns drawn by nature itself. What's the point of hiding all this beauty? This technique is especially effective if the walls of the house are built from valuable timber.
Attention! When choosing a good paint coating We recommend giving preference to those that contain fewer harmful substances. Modern paint comes in semi-gloss, matte and gloss, which is also important to consider when purchasing.
In this case, if shrinkage has already occurred, the interior decoration of a house made of timber can be done sheet materials. The most popular of them:
- plasterboard - actively used for interior work. And this is not surprising, since it allows the creation of a wide variety of architectural creations. Moreover, it has a small specific gravity, easy to process and environmentally friendly material. Its cost is very reasonable, despite its many useful qualities. The instructions for its installation suggest mounting it on a wooden or metal carcass, which is built on wall structures. This system is convenient in that the gypsum board and timber will not touch - this will preserve the skin and load-bearing walls from the formation of cracks. Behind such material you can hide plumbing, electrical wiring and other communications (not to mention the insulating layer).
- Isotex wall panels. As a rule, they are made from wood without glue, so they are hypoallergenic and environmentally friendly. Their advantages include sound-absorbing properties, good thermal insulation characteristics and easy installation. In the role outer covering linen fabrics or vinyl wallpaper are used. In construction stores you will definitely see a wide selection of such products, which are made in different textures and colors.
- Interior wall decoration with imitation timber - lining, siding, MDF panels, block house. Many people like Russian log huts, but this is quite an expensive pleasure. For this reason, it is necessary to build from more budget material– glued or profiled timber with a rectangular cross-section.
With the help of interior decoration with imitation timber, you can give your home the missing nobility without a significant investment of time, money and effort. The application with this cladding is very difficult to distinguish from natural logs.
Among the main advantages it is worth highlighting:
- Wide range of applications - such panels can be used for both interior decoration of bathhouses and exterior cladding of buildings. Unique properties The material makes it possible to achieve high resistance to temperature changes, moisture, ultraviolet radiation and other harmful influences.
- Environmental friendliness - a favorable microclimate is always maintained in the house. Well, if you use larch or pine panels, the air in the house will become healing.
- Simplified installation - the groove fastening system facilitates cladding, and also makes the decorative coating durable and monolithic.
As you may have guessed, the interior decoration of a house made of timber can be original and varied and harmoniously combine with the chosen style of decoration of the room.
If you are planning a renovation, don’t forget about the ceiling.
In this case, you need to start from whether the shrinkage occurs during finishing work or not. If not, you can implement any ideas using a variety of materials.
- Do suspended ceiling, which will close the ceiling well and will not be afraid of shrinkage of the house.
- Leave the ceiling as is. It’s good if the interior matches your approach. An unlined ceiling goes well with styles such as Provence or country.
Conclusion
Any interior decoration is a complex undertaking that solves several important problems. For this reason, it must be treated especially responsibly. Only in this case will the desired comfort, coziness and warmth reign in the house.
Wood is a material that is very popular for the construction of private houses. Although stone and brick are also popular, many people prefer timber, which creates a unique look for the home. But after the construction of the building, it is important to take care of the interior decoration of the house. For it to be successful, it is important to take into account all the features of a material such as timber and choose the most suitable type of finish. All possible options and nuances interior design houses will be discussed further.
Peculiarities
A house made of timber has a number of characteristics that are not typical for houses made of other materials. Among them there are both positive and negative qualities. The advantages of wood include:
- The material is environmentally friendly.
- A house built from timber has a very presentable appearance.
- Constructing a building from wood elements takes less time than working with other materials.
- There is no need to spend a lot of time laying an expensive foundation, since the timber will not create large loads.
- Compared to other materials, wood has a lower price.
The nuances that cause difficulties are considered following points:
When the building is erected, everything needs to be carefully planned interior work that need to be completed. To the main procedures interior design and finishes include:
- Laying communication systems. These include heating, sewerage, electricity, and water supply systems.
- Coating walls with special compounds and antiseptics that protect against fire.
- If desired, you can carry out thermal insulation and waterproofing of the floor and walls.
- Next, the subfloor is laid.
- To make the work more organized, it is recommended to prepare in advance a project for the arrangement and finishing of all rooms.
- Partitions and other additional structures are being installed.
- Walls, ceilings and floors must be carefully prepared before decorative finishing.
- After this, the finishing itself is carried out.
The interior decoration of a building made of timber as a whole is a rather labor-intensive process, so it is important to describe in detail all stages of the work, as well as to correctly select the material for finishing various surfaces.
Types of materials
There are many materials that are used for the interior decoration of a private house made of wooden blocks. Each raw material has its own special characteristics and is primarily used for a specific type of coating. The most popular finishing materials wooden house are:
- lining made of plastic and wood;
- drywall;
- block house;
- decorative plaster;
- decorative rock;
- vinyl siding;
- dye;
- tinting compounds;
- varnish coatings;
- laminate;
- linoleum.
photos
Wooden lining is laid on special sheathing made from wood. Using nails, slats and grooves, the beams are connected to each other and attached to the sheathing. The lining is made from various types of wood, which include pine, spruce, linden, and alder. The material significantly affects appearance, strength and class to which the products belong. IN The following classification is distinguished:
- Extra class. Lining that has no defects.
- Class A. It implies high quality, and even the presence of small knots does not spoil the overall appearance of the coating.
- Class B. Average quality, knots in products are more common.
- The lowest class is C. It implies the presence in the material not only of knots and irregularities, but also of color variations.
Vinyl siding or plastic lining They are excellent for installation in rooms with various purposes, since these coatings are resistant to various influences. In addition, they create an additional layer of heat due to the voids present in the structure. Installation of plastic lining is carried out on a metal frame. The material with a vinyl surface is resistant to moisture and sun rays. Plus, it comes in a variety of color options.
The special material is decorative artificial stone, which is made from various raw materials. This material mainly plays an accent role in the finishing of profiled timber. The stone is placed on the crate, imitating various breeds. Using this coating, zones are identified in large rooms, and also place accents in the interior.
It is quite difficult to install such material yourself, so it is recommended to invite professionals for such work.
It is also worth paying attention to what kind of timber the structure of the house itself is made of. The beam can be made from different varieties wood The most popular is pine. It has the following characteristics:
- Due to the soft structure of wood fibers, the material is excellent for processing.
- This wood is strong and forms a completely reliable frame for the home.
- Pine beams are environmentally friendly; they do not emit substances harmful to human health.
- The shade of pine beams is usually uniform. Most often, natural material is painted in warm colors.
- Despite all the positive characteristics, pine wood is sold at a price that is very affordable for the majority of the population.
Among other types of wood for construction timber house cedar, larch, spruce, and fir are popular. In many ways, their characteristics are similar to pine. Also, the beams can be laid according to various technologies, which determine the choice of suitable material for interior decoration.
Drywall is a very flexible and plastic raw material for home decoration from ordinary bars. Before laying it, it is necessary to carefully treat the surface of the walls. The material is attached to a special frame structure. Most often it is used as wooden sheathing, a layer of insulation is laid in the space between the drywall and the wall. The GLK sheets are fastened using screws, and the seams between them are subsequently treated with plaster compounds and become less noticeable.
Many compositions are suitable for the finishing coating. Drywall is popular not only for finishing walls, but also for ceilings.
An alternative material for the frame is rounded laminated veneer lumber. Its difference from the standard one is that construction in in this case practically does not shrink. Walls made from such beams turn out smooth and elegant, so their texture is most often left visible during interior decoration.
Such a timber surface is treated with a special primer, and then paint and varnish mixtures are applied in several layers, which serve not only as a means of decoration, but also protect the surface from various influences. For the floor of such a home, laminate, ceramics or parquet boards are most often chosen. And the ceiling can be decorated using GLK or lining.
Some owners of private houses decorate their interiors using imitation timber relief. To create it use block house- a type of lining, which is a planed board, one side of which ideally imitates timber. The block house is installed on the sheathing, but it is not necessary to place it in all cases. It will be needed for laying a thermal insulation layer or masking communications. The sheathing is made from small bars or galvanized profiles.
The difference between a block house and an ordinary lining is that the latter can be laid both horizontally and vertically. The imitation timber is placed only in the horizontal direction.
Also, materials such as MDF or siding are used as imitation, but the block house has the greatest resemblance to natural bars.
Projects
To get a seamless and organic interior, it is recommended to design the design of each room in advance and choose the most suitable style directions. In the design of a country house, a relevant option would be chalet or hunting style. It looks very brutal and involves a combination of materials such as wood and stone in the design of the walls. Most often, rooms are decorated with clapboards, the walls are decorated with various hunting attributes, for example, animal heads or hunting equipment.
Russian style looks good in decoration interior decoration private house. It assumes the presence of a structure of beams on the walls. It is permissible to decorate the floors with laminate, imitating large boards. There must be a massive stove in the center of the room.
A house of this type can also be decorated in European, Scandinavian or Provencal style. In these cases, a special feature will be the trim made of lining or siding in light shades. Sometimes a small number is welcome bright accents. Windows are decorated with light screens or curtains.
In style minimalism As a rule, large features dominate. This applies not only to the surface texture itself, which can look like beams, but also to other details, for example, windows and furniture. Having decided on the features of styles, you can choose the most suitable option to decorate your home.
How to sheathe?
No less important than the choice of material and style is the process of covering various surfaces of a wooden house with your own hands. The features of this procedure depend on the selected area. The main surfaces for decoration include walls, floors, and ceilings.
Ceiling
It is better to start the process of decorating surfaces from the ceiling, especially if you prefer to paint the ceiling and walls, or varnish them. The ceiling can also be sheathed with plasterboard and tension structures can be created.
If the ceiling is painted, its surface must be thoroughly cleaned and coated with a primer. After 24 hours, when it is dry, you can begin the painting process. To do this, use a long-haired roller. The process itself must be carried out quite quickly, since the paint quickly hardens on the ceiling surface. In this case, it is advisable to have an assistant who could point out color unevenness during painting (they can only be seen from below).
Instead of paint, the ceiling can be finished with clear varnish to highlight the structure of the wood fibers.
Walls
The walls of the room can be decorated various materials. But regardless of the selected raw material, it is important to remember that the first stage of work involves cleaning and degreasing the surface. The process of preparing walls also includes laying insulation and a waterproofing layer, and treating with putty. Some people prefer to simply plaster the inside of the house. But in this case it is worth remembering that it is not recommended to apply plaster soon after the construction of the house.
When covering beams with varnish or paint, the material should be applied in the direction of the wood grain.
For application coloring compositions a roller can be used, but for processing corners and hard-to-reach areas It is better to work with a brush. When choosing a varnish, pay attention to the content of harmful substances in it, as well as the texture itself, which can be glossy, semi-gloss or matte. Often, fabric wallpaper is even glued onto the leveled surfaces.
Floor
Arrangement of the floor is also a very important point in the interior decoration of a house made of timber. In a private house there are two types of flooring – rough and finished.
The rough design represents the base. It consists of logs, between which a layer of waterproofing and insulation is placed. These layers are then covered with boards. For a private building It is recommended to make the floor with a double structure, since it is more capable of retaining heat. The finishing coat is applied directly to the boards.
Finishing is carried out in several stages.
- Laying a layer of waterproofing on the subfloor boards. The material can be a polymer membrane made of film or roofing felt.
- Installation of timber installed on an edge rectangular section 5 x 10 cm. The design features of this layer depend on the specific finishing coating.
- Reliable fastening of the power set to the floor. To carry out this type of work, it is recommended to use self-tapping screws of the appropriate size.
- Laying insulation in free space. Mineral fiber, rolled glass wool or even polystyrene foam can be used as a heat insulator.
- Laying the finishing layer is the final stage.
Wooden houses themselves look impressive. From the point of view of heat preservation, they do not need interior decoration. But not everyone likes the yellow-brown monotony in the interior of their home. Fortunately, construction market offers a lot of materials for interior decoration of a house made of timber - you just need to spend some time studying the issue and you will definitely choose the right option for yourself.
House made of timber in modern design
Features of wooden houses
The interior decoration of a house made of timber is not fundamentally different from a brick or block frame. You just need to take into account a few features:
- complete shrinkage of the log house lasts several years;
- over time, the gaps between the beams expand;
- wood requires mandatory protection from moisture.
Because of such nuances, you cannot rush to begin interior decoration, otherwise cracks will appear in the walls and ceiling. To avoid troubles, it is necessary to coat the wood with a protective varnish in the first year after construction of the frame.
Builders advise to adhere to of a certain order when finishing a wooden house:
- Laying engineering communications on top of the subfloor
- Basic flooring
- Treatment of timber (filling cracks, filling, applying antiseptic, decorative finishing)
- Ceiling decoration (puttying and varnishing of beams, installation of finishing coating)
The advantage of laminated veneer lumber is that it shrinks less than other types of wood.
In a new house, it is better to leave the original appearance of the timber - environmentally friendly, natural, smooth. And if the log house has stood for several decades, then it is advisable to close it from the inside with modern finishing materials, since returning appearance it will be difficult and expensive for the tree.
Types of interior decoration
Glued laminated timber does not require additional cladding. It looks perfect even without varnishing. If the walls are made of profiled wood, you will have to think about finishing.
Wood needs protective impregnation in any case. It creates a barrier against fungus, mold, moisture and even fire. Can lighten or leave the surface color unchanged.
Low-quality profiled timber can be easily hidden under panels that imitate natural wood from lining, block house or siding - this way the inside of the house will not only maintain eco-style, but will also become warmer.
Create in a wooden cottage modern interior also real. The timber can be easily sheathed with plasterboard or OSB panels, painted, covered with wallpaper, or covered with artificial stone. And hide the electrical wiring inside.
Imitation of real timber in the living room
Floor installation
Before you start finishing work, be sure to think over the design of a house made of timber: the interior decoration of the house directly depends on the project. Based on it, the cost estimate is calculated.
A conscientious construction company has specialists in 3D interior design, estimators, and experienced installers. They will quickly and efficiently fulfill all your wishes, making your dreams come true.
Installation begins with the subfloor. Regardless of the chosen finishing materials, the surface of the lag is first processed protective impregnation from moisture. Insulation is placed between them ( mineral wool or polystyrene). Then a substrate made of chipboard or OSB board is attached. And a finishing coating is already laid on top of it. It can be natural board, linoleum, laminate, parquet or artificial stone.
An added plus! Double flooring will help keep the house warm.
Popular floor coverings
In a wooden cottage, the floor is often laid with planed tongue-and-groove boards made of pine or spruce. It does not require maintenance and retains its original appearance for several decades. And when it gets dark, you just need to sand the top layer and re-coat it with a protective composition.
tongue and groove board without varnish coating
On our website you can find contacts of construction companies that offer finishing and insulation services for houses. You can communicate directly with representatives by visiting the “Low-Rise Country” exhibition of houses.
The only contraindication is the installation of heated floors. This is a fire hazard and impractical, because most of the energy will be spent on heating the wood.
Laminate and parquet conduct heat well. These coverings look similar to plank floors, only with a more interesting pattern. You can create an original pattern from parquet planks. And the laminate is strong enough, it is not pressed through by heels and furniture legs. Imitates different types of wood, metal and stone.
Laminate with imitation stone in a wooden house
Artificial stone on the floor enhances the interior. It is best to install this material in the bathroom, hall or kitchen. To keep your feet from freezing, a heating system is needed. The main advantage of a stone floor is its durability and unique pattern. This type of floor design requires plaster and stone on the walls and ceiling.
Artificial stone on the floor looks luxurious
Linoleum is the most affordable wood imitation. Its service life is no more than 10 years, so it is often installed as a temporary coating.
Wall decoration
Wooden walls are first impregnated with an antiseptic, and then treated with varnish, paint, mastic or oil. Choose a solution based on the expected effect. If the surface needs a tinted matte finish, then mastic or acrylic paint. For an elegant gloss, the timber is coated with oil or varnish. The texture of the wood does not change from such solutions, but moisture is not a problem in the coming years. Wax-based mastic has a porous structure that allows air to pass through, and oil gives a beautiful golden shine.
When the impregnation has dried, the finishing of the house from the profiled timber from the inside begins. The lining requires a wooden sheathing. Steam and heat insulating sheets are placed in the spaces between the slats. The boards themselves are nailed to the slats at the edges. And they are connected to each other using grooves. The lining can be placed vertically, horizontally or diagonally. If you combine these methods, you will get a unique drawing.
Lining on the wall is ideal in a wooden house
The lining is made from different types of wood (spruce, pine, aspen, linden, alder). This affects shades, heat resistance and strength. The material class should also be taken into account:
- C-class is of low quality (with gaps, dark spots and knots);
- B-class of average quality (there are some knots);
- A-class High Quality(there are knots, but they look aesthetically pleasing);
- extra class (ideal material without defects).
There is a popular type of lining called block house. Planed board, the outer side of which imitates timber or logs. The groove-shaped side fastening reliably connects the parts together. They are laid horizontally, starting from bottom to top. Made from coniferous species tree. Ideal for finishing walls made of low-grade profiled timber. Does not require additional protection.
A block house cannot be distinguished from a rounded log from afar
Another finishing material that builders like to use to finish a wooden house made of timber is plasterboard. It is universal, inexpensive and easy to install. It is attached to aluminum or wooden profiles, which are easily screwed to the beam. In the free space you can lay insulation and hide electrical wiring. The sheets themselves are mounted with self-tapping screws. Then plastered and applied finishing coat. For example, wallpaper, self-adhesive paper, ceramics or paint. Niches, arches, and shelves in the wall are created from plasterboard, if there is such a need. The design is 10 cm thick, so it is better not to use this material in a small room. But as a partition it is an ideal option.
Unusual plasterboard arch
Siding and plastic lining are also actively used in finishing works. These materials are cheaper natural wood, but in texture they are very similar to him.
Siding panels are mounted horizontally. You can choose the color and texture to suit your taste: wood, brick, metal or stone.
Plastic lining (PVC panel) standard width up to 10 cm, and inside consists of honeycombs. Air voids improve the insulation of a home. The vinyl surface does not require varnishing, is not afraid of moisture and sun, and its colors are amazing - from monotonous white to bright flower bouquets. A plastic lining is mounted on a metal frame. This material is suitable for the corridor, bathroom and living room. You can sheathe the entire room or just the basement part.
Bathroom cladding with PVC panels
Artificial stone is made from essential resins and natural chips. It looks like the real thing, but is cheaper and lighter in weight. In texture and color it is identical to marble, crushed stone, brick, shell rock, granite, etc. It is attached to the sheathing with a special glue. Goes well with chalet style plaster. It is better to entrust installation to professionals, then the tiles will be glued without gaps and will last a long time. Decorative stone is suitable for accenting in the bedroom, living room, hallway and kitchen.
Accents in the living room made with artificial stone
These are the main materials for finishing the inside of a timber house. They create an interior in Old Russian, classical or modern style. For the ceiling great solution will become a tension fabric. Matte film will fit even into a country room. Drywall or lining is also often used in a wooden house.
Prices in Moscow for interior decoration of a house
What budget should the owner of a wooden house expect for a construction company to complete the interior finishing? It all depends on the complexity and volume. On average, an installation team in Moscow asks for 80 rubles/sq.m. for applying impregnation in one layer. m., oils – 100 rub./sq. m, varnish or wax – 150 rub./sq. m. Painting the inside of a log house will cost 200 rubles/sq.m. m. Plus the cost of the solutions themselves.
Installation of an aluminum frame for any finishing panels– 300 rub./sq.m. Covering a room with plasterboard – 300 rub./sq.m. vinyl siding or panels without insulation - 600 rubles/sq.m, and with insulation - 700 rubles/sq.m. Plus the material itself.
Video description
What and how much in finishing a wooden house - look at the video:
Installation of block house panels is a little cheaper - 450 rubles/sq.m. excluding lathing and related work.
The cost of gluing artificial stone to a wall is at least 1200 rubles/sq.m, but this is if the surface is already prepared. The cost of turnkey work is at least 10,000 rubles/sq.m.
Laying tongue-and-groove floorboards will cost 600 rubles/sq.m including joists, parquet without sanding – 600 rubles/sq.m, laminate or linoleum – 250 rubles/sq.m.
Covering the ceiling with clapboard costs from 500 rubles/sq.m., plasterboard – 450 rubles/sq.m. And installation of stretched PVC fabric will cost from 550 rubles/sq.m. excluding material.
Video description
For an example of designer finishing of a house made of timber, see the video:
Unusual options for finishing a wooden house
Even from familiar materials you can make original design wooden house inside. Like, for example, a clapboard ceiling with carved elements.
Carved clapboard ceiling
Or a silhouette Japanese wood from stones on the wall. The base is covered with the same tiles
stone tree on the wall
Parquet in in capable hands- a real work of art. Don't need no carpet
Unique pattern from parquet board
Conclusion
A wooden house itself creates an atmosphere of comfort and unity with nature, and modern finishing materials help to maintain it. The main thing is professional and high-quality performance of work on the interior decoration of the house - then next repair will not be needed soon.
Construction and finishing of a wooden house or bathhouse on a turnkey basis - rational decision for those who save money and time. The craftsmen of the MariSrub company have the necessary skills and knowledge that guarantee high-quality internal and external finishing of the building, reliable installation communication systems. We carry out a full range of tasks.
Design
Choose finished project Houses. The firm's architect will make the necessary changes taking into account the characteristics of the land plot and the client's wishes. For you spacious one- and two-story cottages, houses and baths with an attic, projects with a garage, terraces and balconies, country houses and guest houses, original gazebos. Didn't like any of the projects? Order custom design!
When you order turnkey construction, we carry out the project for free!
Production
The MariSrub company independently produces and processes lumber. Own production- guarantee low prices and quality of logs, because specialists monitor every stage of production. Wood is carefully selected and sorted. Logs are treated with special protective agents that will protect the material from negative external influence during storage and transportation.
The foundation determines the performance characteristics and service life of the building. Therefore, the choice of materials and installation of the structure must be approached very responsibly. “MariSrub” specialists will help you choose the appropriate type of foundation and perform the installation efficiently and reliably. We provide a full range of work:
- Study of the land plot and design of the foundation;
- Preparation of the base;
- Laying of the structure and cladding.
Before pouring, specialists will determine the location of the wooden house or bathhouse, develop a project and carry out work to study the soil. The choice of design depends on the characteristics of the land and soil. We offer installation of strip, screw, pile-grillage and slab foundations.
Assembly and installation of a log house
Professional builders will quickly and efficiently install a log house from rounded and log houses on plot of land. Big advantage log house consists in the speed of assembly and construction of the log house. Installation will take only 2-7 days depending on the complexity and area of the project. Installation of the log house will be carried out in compliance with the norms and requirements for construction wooden houses. Competent approach and great experience guarantee the reliability of the construction!
Roof installation and roofing work
Engineers design the roof and rafter system taking into account wind loads, precipitation and weather conditions, characteristic of this region. The craftsmen will install a reliable rafter structure and lay a high-quality vapor barrier. In addition, they will help you choose the right one for construction. roof covering, components and additional materials. These are reliable and durable elements that harmoniously combine with each other and with the house.
We carry out installation of sheathing, arrangement of drainpipes, gutters and snow retainers, flashing of cornices and other types of finishing work, installation of dormer windows.
Installation of communications
Communications are carried out after shrinkage of the log house, which takes 6-12 months. MariSrub engineers will carry out step-by-step competent design and installation in strict accordance with established standards and rules of the following systems:
- Electricity, closed and open wiring, laying the input cable in a trench and over the air, installing devices and elements (sockets, switches, etc.);
- Natural and supply and exhaust (forced) ventilation, installation of ventilation devices;
- Water and electric heating, pipe laying;
- Water supply from a central water supply or an independent source, installation of wells and boreholes, installation of filters and pipes;
- Sewage, installation of local treatment facilities, laying pipes and connecting plumbing.
Experts will carefully consider the rational arrangement of systems, which will save on installation and further operation of the wooden house. In addition, a well-thought-out arrangement of communications will make life easy and comfortable.
Interior and exterior finishing
Internal and external finishing wooden house goes through very carefully. It requires attention, time and effort. Includes the following works:
- Insulation and waterproofing of the house;
- Installation of window and door openings;
- Installation of windows, entrance and interior doors;
- Installation of stairs, fences and railings;
- Finishing floors, walls and ceilings in living rooms and bathrooms.
Particular attention must be paid to working with walls. Log walls require caulking and sealing of seams, sanding and coating with protective agents (anti-peren, antiseptics and others). Only after such preparation can the walls be sheathed or left in their natural form, only covered with decorative varnish or paint.
Finishing baths and saunas
When finishing a bath or sauna, it is important to properly treat the surface of the logs. After all, in such a room there is high humidity and frequent temperature changes. The experience and professionalism of the masters of the MariSrub company will allow you to achieve a beautiful appearance and durability of the structure, a pleasant atmosphere and comfort inside. They will pick you up suitable material, which will not overheat and will not burn even with high temperatures, will withstand high humidity and will not rot.
In addition, we carry out the arrangement of baths and saunas. We provide hydro- and thermal insulation, install stoves and chimneys, and treat the premises with special protective agents. We carry out installation of engineering systems, installation of windows and doors, cladding of walls, floors and ceilings.
The MariSrub company will perform a full range of construction and finishing works country houses and wooden baths. Own production, professionalism and experience of specialists, individual approach and affordable prices - a guarantee of a durable, reliable and aesthetically attractive home!
| Services | Price |
|---|---|
| window frame | prices from 4,000 rub. |
| Door frame | prices from 6,000 rub. |
| Met. tiles (without insulation) | prices from 130-1400 rub./m2 |
| Met. tiles (with insulation) | prices from 140-1500 rub./m2 |
| Natural tiles (with insulation) | prices from 1800 rub./m2 |
| Painting | prices from 90-100 rub./m2 layer |
| Log skin | prices from 300 rub. /m2 |
| Installation of platbands | prices from 600 rubles opening |
| Imitation of timber, in racing | prices from 450-500 rub./m2 |
| Subfloor - plywood | prices from 250-300 rub./m2 |
| Clean floor | prices from 400-500 rub./m2 |
| Assembling a log house | prices from 3000-3200 rub./m2 |
Wooden houses are now very popular among the population. And the reason for this is the many advantages of such buildings in Moscow. Assembling a house from timber takes a very short time, their appearance is very presentable, and to order, the price of such a structure is affordable for most consumers, unlike, for example, brick analogues. In addition, wooden houses have excellent thermal conductivity in cold weather, and in the summer they give the house coolness and comfort. Finish can be different materials, not only inside, but also outside. Let's look at the issue of a house made of timber in more detail.
Turnkey exterior finishing of a house in Moscow
Built wooden house turnkey already in itself has beautiful view. He seems to hint at a closeness to the nature of his owner. Therefore, many want to leave such a pristine and natural look and do not cover the outside of the house with anything at all. In this case, a special solution consisting of antiseptics is simply applied to the beams to prevent the formation of mold and fungi. And after that the house is covered with varnish and paint. All these measures are necessary so that the structure is not encroached upon by any pests and microorganisms, it is not subject to deformation and would serve you well long years. Please note that the cottage must be painted on a turnkey basis constantly to ensure its durability.
If you don't want to use paints and varnishes, then for exterior decoration a variety of decorative items. Usually they are resorted to if you plan to stay in the house in the winter. cold period time of year. The first finishing is the insulation of the home. And only after that the exterior is finished with the material you like. Let’s look in more detail at what exactly can be used to clad a house made of timber in a high-quality and inexpensive way.
For example, finishing with materials such as stone, granite or porcelain stoneware
Natural or artificial stone is an excellent and very effective material for home decoration. In addition to giving houses an aesthetic appearance and properties, the stone has great strength, it does not allow moisture to pass through, and does not react to temperature changes. If you decide to use stone for your exterior, this would be a great choice. Your home will be reliably protected from the effects of adverse weather conditions and will serve you for many years.
The entire house can be covered with stone, or only partially. In any case, this finish goes well with wood. There is also usually a wide variety of options on sale. decorative stone. Therefore, you can easily let your imagination run wild and try yourself as a designer.
Another finishing material that looks like stone is porcelain stoneware. He also looks very elegant and noble. Porcelain stoneware perfectly withstands temperature changes and mechanical stress, and is not afraid of high humidity and other natural influences. In addition, it perfectly repels dust and dirt. And if the need for cleaning does arise, it is very simple to do.
The finishing is done with the most popular material – brick. Brickwork will always look beautiful and aesthetically pleasing and will suit any style of home. Well, everyone knows about the excellent performance characteristics of this material. It is reliable, retains heat well and is durable. Brick, along with the insulation used, will further increase the thermal conductivity of your home. However, to achieve maximum effect, both from the point of view of thermal conductivity and aesthetics, brick finishing should be carried out by a qualified craftsman with experience. And it is also not recommended to purchase material options for this, the prices of which are low.
Finishing timber houses using plaster in Moscow
This material is designed to protect the structure from environmental influences, as well as make its appearance more attractive. Plaster performs the function of insulation, protects houses from mold, bacteria and moisture penetration, and it is also convenient in that when applied it can hide all the unevenness of the walls and similar construction flaws. As a result, a special structural or relief mixture can be applied to the walls, which is decorative in nature.
However, the plastering process is not the easiest. This finishing requires the presence and experience of certain skills. If you do not have them, it is recommended to trust the professionals. They will definitely do their job perfectly. Plastered walls can be painted to further highlight the topography or structure. The pricing policy for these services can be viewed on our website.
Finishing a house made of timber using siding in Moscow
Finishing timber houses using siding - pricing policy of this material low and easy to install. However, in the end it will look nice and neat. Siding protects the building well from the influences of nature - precipitation. There is also a huge variety on the market various options this material. Therefore, you can safely fantasize about what your turnkey cottage should look like. Let's look at the types of siding and prices.
- Metal siding. Typically, this type is used when cladding timber for industrial structures rather than in the residential sector. The metal is strong and flexible at the same time, and also has long term services. However, the finish has disadvantages. Metal is a very heavy material, its price itself is high, and in the event of mechanical impact, dents will remain on it. In addition, steel is susceptible to corrosion. Therefore, it will need to be additionally processed with special means.
- Vinyl siding. If you look from the outside, this finish will resemble ordinary boards. The only difference is that vinyl does not deteriorate over time. The price of this material for timber is very cheap, it is lightweight, and it is also easy to install. It is easy to wash and does not require any additional care. You can find a wide range of similar products on the market. Vinyl siding is not exposed to sunlight, retains its color for a long time, and is not attacked by fungi and bacteria. To remove dust, siding can be simply wiped periodically with water and detergent.
- Cement siding. This is a very durable material, and it is also fireproof. However, cement is not popular among the population. And the reason for this is a decent amount of raw materials, which affects the ease of installation and transportation. Also, the weight of the entire house increases significantly, not to mention the foundation. And to order, cement is not the most affordable price.
- Wood siding. It is extremely rare that finishing is used for outside. Typically wood is used inside a building. Prices for material for cladding timber are high. And its main disadvantage is its ability to absorb moisture, which negatively affects the service life of such siding.
Home finishing work using panels that imitate logs
It may seem strange that a house built from timber needs to be covered with a material that imitates it. This is true, for example, for old houses made of timber, the logs of which are no longer pleasing to the eye with their attractiveness. Wood tends to darken, absorb dirt, and become damaged. It is not always financially possible to build a new cottage on the site of an old one. The cost of finishing the outside with imitation material will be much cheaper.
But wooden panels are used only when you plan to completely repeat the contour of your building, preserving its naturalness and original appearance, and at the same time insulate it. The panels completely copy the profile of beams or profile beams. Moreover, this siding is so realistic that it is almost impossible to detect the imitation with the naked eye.
Before finishing begins, the walls are covered with specialized solutions to protect against mold, bacteria, moisture, fire and various pests.
Fachwerk - finishing a house in this style
A very original and effective choice. This medieval style is very popular in Europe. And in our country, many consumers prefer finishing in this style. Materials for affordable price Finishes include slabs of chips and cement, as well as OSB panels. To complete the finishing in the half-timbered style, you need to make the following elements:
- Frame of vertical and horizontal partitions
- Wooden braces
- The gaps are filled with various finishing materials, for example, brick, stone or something else
- The wall is decoratively divided into geometric figures. Parts for this can be crossbars, braces, etc.
How to finish the inside of a wooden house?
The interior decoration of timber houses also has a wide variety of materials. Unlike the exterior decoration of a house made of timber, in this case more attention is paid not to the strength characteristics of the material, but to its decorative properties. Those. the finishing should match the future furniture and other decorative elements, and fit well into the overall style and interior of the house. You can not limit yourself to one material, but use several; it’s enough just to maintain harmony and aesthetics.
Application of decorative stone
Very good option, ordering a house made of timber, where the walls are relatively smooth. Therefore, it will not be possible to lay them out with stones special labor. In addition, the stone has many advantages:
The walls can be painted the color that you like and that suits your interior. In addition to its aesthetic function, paint can protect wood from the effects of fungi and bacteria. Before the painting process, the walls must be leveled, covering all the depressions and cracks. After this, the surface of the timber is primed so that the paint adheres better to the timber.
It is advisable to choose environmentally friendly paint. When drying, it should not emit an unpleasant odor. Moreover, you should pay attention to the fact that in the end the wall may have a glossy or matte surface. What exactly is your choice, what you like best or what best suits the style of the room.
If you don’t want to change anything at all, but want to preserve the naturalness of natural wood, then you can emphasize it even more with the help of colorless varnish and stain.
Finishing a house made of timber, using siding or plastic and wooden lining
If your cottage is already quite old, but you still gravitate toward natural wood, then, as an option, you can use lining for decoration. However, lining is not the final finish, and this must be kept in mind. Wood is usually subject to rot, and besides, all kinds of insects and mold love it. After finishing a house made of timber with clapboards, it must be treated with specialized compounds for protection, as well as varnish.
Yes, perhaps finishing houses made of timber with clapboard is not the easiest task. However, in the end you will get the natural look of natural wood, which will always delight you and your guests, and at an attractive price. Your old building will get a second life. If desired, you can successfully execute wooden clapboard and stone. It is difficult to imagine a better and more natural combination. This way you can model and make the design as original as you imagine it to be.
Another affordable material for finishing a wooden house is plastic siding. It also has some advantages. It is easy to clean and does not absorb water. Therefore, this option for such a finishing price will be optimally suited for bathrooms or kitchens. In addition, the plastic is lightweight and very easy to install. Also, and very importantly, the ease of installation means that you can handle it on your own. There is no need for any special knowledge or skills. This way you can save a decent amount of money. And the prices for plastic siding are much lower than those ordered from competitors.
Decorating walls in a house using plasterboard
This material is the most popular among consumers at this time. With its help, walls are quickly leveled to perfect condition, its price is low. In addition, all sorts of things are made from plasterboard decorative elements, for example, arches, roundings, partitions, etc. There is room for the designer's imagination to run wild here. However, drywall has one unpleasant drawback - it hides part of the room. Therefore, it is not recommended to use it in small rooms.
Drywall itself is not the final finishing material. It is usually covered with wallpaper, painted or other facing material.
