Door decoration. Framing the doorway: possible options. Decoration with decorative stone

Sometimes it happens that after the redevelopment, there remains an opening in the wall. Of course, hardly anyone would want to leave this hole in this state. That's why they frame it doorway.

If you decorate this hole beautifully, it will turn from a gloomy hole into the compositional center of the room. And framing a doorway can be done in different ways.

Firstly, open openings are used to provide rigidity to the building. Sometimes in standard houses old building load-bearing walls are not installed in the most convenient places. According to technical requirements, such walls cannot be demolished. Therefore, residents can only play up the existing openings, decorating and ennobling them.

Secondly, open openings allow you to unite the space. For example, a kitchen can be combined with a living room, an office with a bedroom, etc. And the resulting passage in the wall can be decorated with decorative material.

Thirdly, open openings are used to zone the room. This option involves the construction of walls with open openings in large rooms. According to the designers, this approach is extremely beneficial: there are no restrictions on the size and shape of the hole in the wall, and no approval is required from local supervisory authorities (in all other cases such approval is required).

Opening shape

Before making a doorway in the wall, you should decide in advance on its shape. Typically choose from the following options:

rectangular passage;
arch;
imitation arch.

As a rule, the rectangular option provides an addition in the form of a door leaf, the design of which must correspond to the overall concept of the interior of the room. The decoration of such a hole in the wall is carried out using cashing: it can be made of MDF, plastic or wood (it all depends on the material from which the door system is made).

However, in cases where a rectangular opening is left without a door, it must be decorated. Appropriate decor (for example, elements made of polyurethane) will allow you to shift the emphasis from an unattractive design to one or another bright design detail.

An arch is appropriate if two connected rooms are decorated in the same style. The parameters of such a passage can be very diverse: everything depends on the characteristics of the room and the wishes of the homeowner. Such an opening can be decorated with additional trim or polyurethane decor can be used.

The basic rule when choosing finishing material for an arch: outer frame In no case should it weigh down the structure. However, in arched doorway If desired, even a door can be installed (it will have to be made to order).

An imitation of an arch is performed when creating a wide and high rectangular opening. To do this, the top inner corners secure arched segments (they can be made of polyurethane or other suitable material). This option for framing the opening is good decision for a room whose design is decorated in Slavic or oriental style.

But regardless of the shape of the open opening, the frame chosen for it plays a very important role: it can either focus attention on the border passing between two rooms, or “dissolve” it.

To attract attention

The simplest way to design this structure is to cover it with polyurethane elements. It is worth noting that according to by and large Polyurethane stucco molding is a durable and instantly lightweight decoration. This decor looks very beautiful. Yes, and polyurethane stucco molding is attached quite simply: special glue is used for this.

Moreover, decor made of polyurethane is not afraid of extreme temperatures and aggressive environments. He won't lose his valuable properties at a temperature of – 60 degrees or + 80 degrees. In addition, this decor is not subject to negative influence moisture and ultraviolet radiation.

The use of polyurethane when decorating the opening allows you to create an incredible design. Moreover, the created design can correspond to one or another style decision in which the interior is decorated: Baroque, Empire, Art Nouveau, etc. If desired, the frame of the doorway, made using polyurethane stucco, can be painted in any shade: the created design will be simply stunning.

You can draw attention to the design by creating a passage in the wall using wood panels(by addition or other element). For example, a design can be created using entire thematic images of birds, predatory animals, trees, etc. Moreover, each such element - decor should resonate with other details that convey the main style decision premises.

Moreover, framing the doorway can be done using ceramic tiles or decorative stone: the design is delightful. If you cover a hole made in the wall with this facing material, the room will be transformed beyond recognition.

Red herring

You can “hide” it if you wish. doorway: They do this using a special decor - textiles. Designers recommend using the following “finishing elements”:

Curtains.
It is important to pay attention to the fact that curtains can be either symmetrical or asymmetrical (the lengths of the curtains are different).
Lambrequins.
This decor can be used either independently or together with curtains.

Moreover, create unique design A wicker frame or thread curtains will help.

Knowing how to decorate a doorway, you can work real miracles. You just have to choose the right one finishing material and line the passage in the wall with it, and the design of the room will change beyond recognition.

Exist various options doorway finishing. They help to obtain a harmonious and stylish design premises. It must be taken into account that these designs are divided into two types, which depend on the presence or absence of a door leaf. It is this element that determines the sequence of activities carried out in order to obtain the desired effect.

Methods for lining openings without door panels

There are two main options for finishing a doorway without a door:

Standard. This technology provides lining of openings various materials, without changing the design.
Arched. This method involves changing the configuration of the opening - significantly or slightly.

Each method requires compliance with certain rules, as well as accuracy.

Various types of materials for standard finishing

To design a doorway without a door, finishing products are used that have different technological features.

PVC panels

This option is one of the most popular. This is facilitated by the fact that such products have excellent characteristics and are also very affordable. For installation, the glue-on method is often used. The panels are mainly used to cover slopes. Other parts of the doorway are finished with other materials.

On a note! PVC products require careful selection. To create a coating that will look harmonious in the interior, you should give preference to varieties made as imitation of natural materials.

Everything is done as follows:

Requires leaving the structure for a while to avoid displacement of elements. Now we begin to eliminate the external joints. If you close them plastic corners, as is done when covering windows, the result may not be a very attractive effect. Therefore, it is better to putty with putty. Then you can begin the subsequent finishing. For this purpose, painting and wallpapering are carried out.

You should know! There are plastic trims that combine well with PVC panels. But pruning them is a very labor-intensive task. The fact is that it is necessary to adjust the elements at an angle of 90 degrees.

The best replacement for PVC would be MDF panels. Finishing openings with this material goes well with other products. If it is necessary to cladding structures using this method in order to eliminate formations visible joints, lamination is used.

Cladding the door slope using MDF

Stucco molding

It is immediately worth noting that stucco molding is currently used, which is made from polyurethane. Unlike gypsum options, this type The product is characterized by low weight. Its installation can be performed without the involvement of additional assistants. Important feature What makes this material so special is that it can be processed further. That is, it is easy to paint in different colors.

The finishing of the opening is carried out according to a certain scheme:

All parts and glue are pre-conditioned in the room where installation will take place for 24 hours. This will ensure that all elements get used to the existing microclimate.
The areas that will be pasted over are carefully coated with primer. Only compositions that have a deep penetrating effect are selected.
Important! It should be remembered that the stucco sticker is done first. Only after this can you produce general finishing walls
The surfaces of the products are slightly rubbed sandpaper. Next, glue is applied. It is evenly distributed along the wrong side of the fragments. Now the stucco molding is applied to the selected area and pressed well. To prevent the elements from slipping, small screws are screwed under them.
If excess glue appears, it is removed immediately. When this cannot be done immediately, you can use acetone, which is used to moisten a sponge.
An important point is the joining of elements. It can be carried out at a right angle (perpendicular installation), or trimming can be performed, which is done at an angle of 45 degrees.
After cladding, joints appear. They are hidden using putty, which, after drying, is rubbed down with sandpaper. Particular care should be taken when finishing between rooms, because it is necessary to provide for the location of parts on both sides.

Decorating a doorway with stucco requires some nuances. This option is most suitable for rooms that have fairly high ceilings. If you use it for small rooms, then it is advisable to carefully consider the location of all elements. The fact is that it is quite easy to overload a room so that the interior becomes simply ruined.

Fake diamond

The use of artificial stone is an excellent solution that helps to decorate a doorway without a door in a very stylish and modern way. This option is superior to similar products due to the fact that the material is produced in a wide decorative range. For example, clinker tiles are also used for cladding such structures, but their choice is quite limited.

On a note! It should be borne in mind that the concept “artificial” does not detract from the merits of this product. The imitation is carried out with excellent accuracy. The texture and shades of natural stones are repeated.

Decorating a doorway with artificial stone

Before you finish decorative stone doorway without a door, you should familiarize yourself with its advantages. The following advantages of the material are highlighted:

Excellent appearance that brings presentability to the interior.
Possibility of combination with other finishing materials.
Excellent resistance to mechanical stress.
Durability. The service life is calculated in decades.

For work, small-sized products are used that have some relief. If you choose a deeper texture, it will look very bulky.

Cladding is carried out according to various technologies. Often laying is done in a way that allows for uneven edges to be formed.

On a note! Currently, special elements have been developed that act as corner pads. They allow you to avoid unnecessary pruning.

Making the opening is quite simple:

Marking is carried out in selected areas. It should repeat the developed scheme. To carry out this process most accurately, the stone is laid out on the floor in a given order.
Wall surfaces are treated with primers that have deep penetration. This will improve adhesion. It is important to let all areas dry thoroughly.
Fixation can be carried out using special tile adhesive or “liquid nails”. The second option is suitable for cases where the base has almost perfect evenness.
The composition is applied to the reverse side of the elements. It is important to remove any excess.
The stone is laid in ways that make it possible to form a seam or make do with a monolithic surface (without joints).
The parts settle into place and press together. It is important to achieve good grip.
If joints have been formed, they are rubbed down. The color of the mixture can be contrasting or monochromatic.

If the question arises: what is the best way to decorate a doorway that does not have doors, the first thing you can consider is options that include fake diamond, decorative brick and clinker.

Plaster

Recently, this material has seen a noticeable decline in popularity. But just recently, about ten years ago, this method seemed to be the most accessible. It's safe to say that many people simply underestimate plaster. Indeed, this option has several significant disadvantages - labor-intensive application (in the absence of experience) and the presence of a certain amount of “dirt”. But if you do all the work correctly, and also achieve a combination with other products, the effect will be pleasantly surprising.

How to decorate a doorway without a door by plastering:

In preparation required amount mixtures. The solution made should be in such quantity that it is enough for 30-45 minutes of work.
The mixture is applied to the surface by casting. Leveling occurs using a rule or a wide spatula.
If required, beacons and perforated profile guides are installed.
When the mortar layer exceeds 1-1.5 cm, a reinforcing mesh is laid.

This surface can be painted. But it’s better if the plaster serves as the starting composition. Then finishing decorative (textured) putty may act. It is applied in in a certain order which allows you to get amazing coverage. Such doorways will decorate the interior.

Decorative plaster– an effective design option for a doorway without a door

Arch device

An arch can transform an interior. It is important to understand that a device of this design requires some experience. After all, to decorate a doorway exclusively with your own hands, you will need to spend a lot of effort.

You should know! There are standard-sized arches that are completely ready for installation. They just need to be carefully installed.

Doorway in the form of an arch

The easiest way to make arches is made of plasterboard. It looks like this:

Finishing doorways begins with installing the frame on both sides. It is fixed on the upper horizontal and vertical posts. On the latter, it has a size that is almost equal to the end of the rounding.
GCR parts are attached to the frame. An arc is pre-cut on them; a stencil is made for this.
Additional lathing is performed inside the resulting structure. It serves to fasten the last arcuate plasterboard element.
The final finishing is done with putty. Decorative cladding made from various materials.

The arch can be made using more “noble” products, but will require more skill.

Other design methods

The design of doorways can be done using other methods. They consist of using decorative curtains or screens. This method is very affordable and simple. In addition, it does not require virtually any work.

Various options can be used:

Fabric curtains. They will be a great addition to any interior. The composition should be composed in such a way that there is harmony with other elements and combination with the window decoration.
Bamboo curtains. This option is suitable when the room is made in eco style.
Thread curtains. These products are used if you want to fill the room with unusualness.

Of course, everyone chooses how to design the opening based on their taste and preferences.

Photo gallery: options for finishing doorways without doors (20 photos)

What can be done with an opening equipped with a door

The solution to how to make a doorway that has door leaf, involves the use of the most simple options. The only difference is where this structure is located.

Simple arrangement of interior space

Most affordable option finishing interior openings installation of the box and adjacent elements is considered. General technology is this:

The box is installed. It can be equipped with a threshold or without it.
Extensions are used as materials that will line the slopes. They are released standard size(up to 120-150 mm).
These elements are attached using a groove on the box. If such design feature is not provided, then fixation is carried out using self-tapping screws. The hole for them is drilled through the end of the part.
External finishing is done using platbands that frame the opening.

This option is great for situations where you need to cladding not very wide structures.

Other options

How to decorate a doorway that has a door in a more original way? In reality, to create a truly interesting option, you need to try. The fact is that it is the hanging canvas that limits the use different materials. Improper use of finishing products prevents opening. Although, if you consider this feature, then for exterior finishing Almost everything fits.

On a note! There is a sliding way to open the door. That is, the canvases repeat the design of compartment doors. This is a rather interesting technological solution that requires a more careful selection of facing products.

How to finish a doorway? This question has many answers, depending on specific situation. But no matter what anyone advises, you still need to listen to your heart and choose the option that will be closest to you.

During repair work the owners may have a dilemma - whether to install or better replace them with more modern version decoration, for example, with an arch. By removing the doors, you can solve several problems at once: decorate your home and save free space. That's why most people choose alternative options. Let's figure out how to decorate a doorway beautifully and without special effort, in the main pros and cons existing methods decorating the passages between rooms, as well as the appropriateness of such redevelopment in various situations.

In what cases are interior doors not required?

The interior opening can be varied

The answer to this question largely depends on functional purpose the premises that are planned to be combined, and the individual characteristics of the housing. The passage between the kitchen and living room is often remodeled. This redevelopment makes sense if the kitchen area is small. Dining area at the same time, you can move it into the room, freeing up useful kitchen space.

Replacing the door with an arch or another option for opening the opening will be no less relevant in the case of connecting a balcony to one of the rooms. This will ensure a smooth transition between them, and the two rooms will seem to merge into one, which will visually enlarge the room.

A passage designed in the form of a portal will also look good if there is small dressing room located between the front door and the corridor. But making such an entrance to the bedroom, even if it is draped with curtains, is hardly appropriate.

Possible finishing options

So, if you decide that the layout of your home allows you to refresh the interior by changing the appearance of doorways, then first you should learn more about existing varieties such finishing. Let's look at some of the most popular ways to decorate the passage between rooms.

Arches in the doorway. What are they?

Arch

Installing an arch in a doorway is one of the most popular ways to decorate the entrance to a room. It can be performed in several variations:

Oval. This arch is considered standard and has a rounded shape. To create it, you will need to round the corners of the opening using drywall and a metal frame.
Rectangle. The most easily implemented option that does not require the installation of additional structures.
Complex shapes. Making the doorway more exotic looking impossible without complex installation plasterboard construction and, most likely, will require the involvement of builders and finishers.
Imitation. This type of arch is relevant if the door structure is of a significant size and does not look very beautiful in a rectangular form. To give such a passage a rounded shape, semicircular segments are installed at its corners.

All types of arches, except unusual shapes, are quite simple to implement. However, there is also a minus - they cannot be installed in any room, because the installation requires a considerable height of ceilings. Therefore, for those who are not very lucky with this option, it is better to choose another decor option.

Stone decoration is always in fashion

A bright accent in the interior will be a doorway painted in contrasting colors or highlighted using various facing materials. And stone decoration for this purpose is one of best solutions. Stone for finishing can be used both natural and artificial. The first is used less frequently due to its high cost and less ease of installation and operation.

Stone finishing

Installation natural stone– the process is not easy, and entrusting it better for professionals. But it is quite possible to cope with cladding with artificial stone-like panels yourself, securing them tile adhesive. At the same time, according to appearance they will be practically in no way inferior to the real material.

Note! To ensure that the stone decoration is in harmony with the rest of the interior, it is worth placing in the room objects with elements from similar material, for example, a mirror in a frame, shelves, wall panels or false fireplace.

Decoration with stucco: beautiful and practical

Polyurethane stucco molding is also very popular when decorating doorways. It has many advantages: it is easy to attach, quite durable, and, being initially white, lends itself well to painting.

But when deciding to decorate with this material, you need to remember that it often looks very cumbersome. Therefore, if the rooms are small, it makes sense to choose not relief, but flat elements so as not to visually overload the room.

Curtains in the doorway: an affordable solution

Curtains are a great solution!

Draping curtains is another way to refine a doorway. The advantage of this type of design is that it not only allows you to emphasize the passage between rooms, but also, if necessary, hide it. The advantages also include ease of installation, affordability and wide choose color range and materials.

Curtains in the doorway can be either fabric or in the form of “hangers”. You can use regular fabric curtains traditional curtains, but it is better to purchase products specifically designed for this purpose.

So-called “pendants” are used more often for decorating doors. They can cover the entire opening or have the appearance of a frame. The materials used for their manufacture are wood, plastic, bamboo, various cords, beads, etc. If you wish, you can easily make such a decoration with your own hands.

Video on how to create a door arch with your own hands

In this section, we invite you to familiarize yourself with the installation and design features door arch with your own hands. The video will help you understand all the nuances of this matter.

Photos of interiors with interesting door space decor

As you can see, there are many options for designing a doorway. We have described only some of them, but in reality there are many times more of them and anyone who decides to replace the boring and standard door structure for something more original, he will be able to find a solution to his liking. Make a choice and get a few interesting ideas The photos below will help you.

Arches continue to hold the palm of leadership among decorative finishing doorways. This is not surprising, because in addition to the classic round shape, there are many other variations. For example, by performing a small redevelopment and expanding the entrance to the room, you can install an arch with niches or shelves. It will not only add variety to the interior, but can also serve as a stand for indoor plants, your photos or souvenirs.

Those who like minimalism can opt for a simple but original arch in the shape of a circle.

For lovers of luxury, this method of decorating doors also opens up a lot of possibilities. Arch, finished polyurethane stucco, will turn your home into a real palace.

Don't forget about curtains. Such bamboo curtains will fit perfectly into an interior decorated in ethno style.

Another original version– thread curtains. They look very gentle, but at the same time bright, and the variety of colors allows you to choose curtains that are ideal for your home.

The absence of doors visually unifies the space of the rooms. This technique is often used for the passage between the kitchen and the dining room, the living room and the library. However, he is subject to constant external influence, shock, friction. Therefore, the choice of materials should be such that they last long enough. How to design a doorway if you do not plan to install a door is up to you to decide.

Preparing the opening

Before you begin finishing, you need to level the opening. It can be done:

drywall;
plaster.

Plastering – reliable way processing. But it entails the formation of a large amount of dust and dirt. Therefore, when working, they often give preference to drywall.

Depending on how you design the opening, you will draw attention to the passage or hide it, making it invisible. After plastering, the opening can be painted the same color as the wall, or different from it, and also covered with decorative stone or other material.

When covering the entrance opening with plasterboard with your own hands, the surface turns out to be perfectly smooth and even. You can glue any finishing elements to it if you want to highlight the passage. If the passage should not attract attention, then it is simply painted.

Unlike plaster, drywall is easy to work with. It does not generate dust or debris, is easy to attach, and allows you to easily install wiring for additional lighting opening from the inside. Plasterboard finishing is ideal for arched structures, with its help you can give the passage any shape.

After plastering or plasterboarding is completed, before finishing, you need to clean the surface from dust and other contaminants. After this you can start decorative design opening.

Finishing materials

The most common finishing options may be as follows:

fake diamond;
wood or MDF panels;
PVC panels;

The above list is not exhaustive. It is possible to use other materials depending on the design of the room and the preferences of the owners. Let's take a closer look at the process and features of finishing with the most commonly used materials.

Making an opening with decorative stone with your own hands

The stone used for finishing can be natural or artificial. The main disadvantage of natural is the high price. Artificial ones are made in factories from natural materials. It costs less, weighs less and is not inferior to natural in quality if made in compliance with technology.

Advantages of decorating an opening with decorative stone:

fire safety;
moisture resistance;
durability and ease of maintenance;
ease and convenience when working;
standard sizes.

Decoration with decorative stone is well suited for the opening front door. It is also used in spacious rooms, rooms with a small amount furniture. The stone will fit beautifully into a living room with a fireplace.

Finishing a doorway without a door with decorative stone can be done even by those who have no experience working with it. To do this you need to know the basic rules.

The masonry on the wall should be symmetrical on both sides of the passage.
The seams between the decorative stones must be smooth and equal in width.
At the bottom of the opening, the decoration on the wall may be more massive than at the top.

Work must begin with markings. The location of the stone is marked on the wall with a pencil. They start gluing it from the bottom corner. Pre-treat the area intended for stone with a primer. Experts recommend laying out the tiles on the floor the way they will eventually be on the opening. This will allow you to achieve the right combination colors.

To ensure the work is done smoothly, use a level. If there is a need to break the tile in half, be sure to handle the sharp corners by sanding them.

It is worth keeping in mind that the combination of stone, even if it is artificial, with MDF panels or other material imitating wood is undesirable. Against the background of decorative stone finishing, they will look unnatural.

After the work is completed and the glue has dried, you can begin to cover the stone. special composition which will give it a more natural look.

Finishing with MDF panels

Decorating a doorway with your own hands using wood or MDF panels that imitate it is widely used for interior passages in an apartment. Due to its strength, it is often chosen for finishing the front door.

Advantages of covering with MDF panels:

strength;
ease of care;
ease of installation.

The only drawback is the small number of color options.

After measuring the opening, the resulting dimensions are transferred to the panel and the strips are cut out. MDF is fastened using a special mixture or liquid nails. The seam between the panel and the wall is covered with platbands, which are attached to the wall.

In addition to MDF, it is possible to finish passages without doors in an apartment with extensions.

Application of PVC panels

Another design option is PVC panels. They have a number of advantages:

ease of care;
low cost;
ease of installation;
wide selection of color and texture options.

At PVC finishing For panels, preference is most often given to material that imitates wood. Fastening is done liquid nails. PVC panels are suitable for interior openings in an apartment. Installing them on the wall near the front door is not advisable, since they do not have sufficient strength.

Decoration with curtains

One more a good option– decorating the opening with curtains. They distract attention from the entrance passage, give a feeling of comfort and completeness to the interior and look beautiful.

All you need to decorate the curtains is to hang a cornice. Anyone can do this with their own hands. The main thing to consider is that the curtain should not interfere with free passage. Therefore, Roman, French and other options with horizontal closure are not suitable. Vertically opening curtains are tied to the wall.

When choosing how to decorate a doorway, entrance or interior door with their own hands, they most often stop at decorating with decorative stone, PVC and MDF panels or curtains. Decoration is also possible with other materials, for example, tiles or mirrors, but they are not used so often.

When carrying out repair work, non-standard, creative ideas reconstruction of the premises. It is worth considering one of these options - designing an open one.

Is it worth making an open doorway?

The presence of an open doorway will become great solution with equipment. By playing with this option, you can zone the room. There is no need to worry about shape or size restrictions. When thinking about the shape of a doorway, it is worth noting that two of them are often used: a classic rectangle, an arch, or its imitation. Each of the proposed options can be played up and made as original as possible. To do this, it is worth considering what materials can be used to frame the doorway.

The presence of an arch is welcome if the rooms connecting it are made in the same style, which cannot be said about a rectangular opening. The latter refers to a separate room and is its addition. A high or wide doorway can be decorated using an imitation arch. The framing of such an arch can be made in an oriental style with openwork internal segments and corner finishing. Framing a doorway made of polyurethane is considered the simplest and most affordable. Elements of this kind will become a light, beautiful and durable decoration of the opening.

Framing the doorway with stucco allows you to give the structure a special style that matches the room. It can be: Rococo, Art Nouveau, Empire. Stucco is often used white, but if desired, it can be replaced with a colored one.

One more interesting option is the frame of the doorway made of wood. Such panels can be decorated with wood carvings. This technique allows you to apply any image in the form of: figures, animals, plants, birds. This is a rather rare type of framing, as it requires help from specialists, but the result is worth it.

Framing a doorway with stone is possible if it meets of this material general interior. Such an opening should be lined with material on both sides. An uneven edge can give a casual look and a more natural look.

In order to frame the doorway with a corner correctly, diamond cutting should be carried out. This method will help keep the edges straight.