Fence from wooden picket fence- a once half-forgotten type of fencing that has now become trendy again, gradually replacing popular metal. Wood is universal and warm material, symbol home comfort in temperate climates. There are wooden picket fences in almost every locality Russia. Although they got their name from German word pole or pillar.
Classics of the genre
The specificity of the fencing structure makes it durable and strong, the material gives comfort and decorativeness, the main advantage is the variability of the proposed construction. Dimensions - width, height and length - can be given any, and simple coloring will change even the most unsightly row of wooden slats.
The picket fence received its name due to the specificity of the device from several standard elements. The developed technology for installing such barriers makes the fence functional and strong, and relatively inexpensive. The established scheme: the longitudinal strips are fixed to the longitudinal slats.
Fence on the site
They are fixed on strong support posts dug into the ground or concreted.
Craftsmen, in an effort to decorate everyday life, moved away from the boring German standard. A simple picket fence is sometimes a real work of art.
The photo shows pseudo-Russian style, decorated using the simplest tools.
Before painting
A wooden picket fence built in a dacha easily turns from a functional fence into a decorative fence. This happens thanks to in different ways fastening, the whimsical imagination of the owner who worked on it, unusual coloring or the use of slats of different lengths.
It’s hard to say what exactly brought the practice of installing wooden picket fences back into everyday life and construction:
- fashion for natural materials;
- the inherent decorativeness of wood;
- relatively affordable cost;
- nostalgic mood for the old good times when such fences were the most common thing and covered every meter of outlying streets and villages;
- the ability to install a picket fence with your own hands, without special tools, to independently and accurately calculate the required footage;
- option to order a fence from a construction company;
- almost any size of fencing.
Fence decor
Perhaps the combination of advantages made a wooden picket fence popular. The use of imagination and skill produces fences so beautiful that passers-by stop to admire. And for a long time it has not occurred to anyone to think that the owner’s choice was forced by the lower cost of a wooden picket fence.
The photo shows a capital structure in the Magnat style.
Beautiful fence for a private house
Picket fence - best choice, possessions, cottages, township and rural housing. Its undeniable advantages include:
- various designs, subject to any whim of the owner;
- the presence, if necessary, of additional reinforcement, shields stuffed to close gaps, metal or;
- variable methods of placing slats (options for laying a picket fence: checkerboard, herringbone, oblique crossbars, beams, imitation of a log house);
- the presence of modern impregnation compounds that allow you to extend the previously short life of the structure, and at the same time emphasize the natural beauty of the tree;
- the opportunity to paint beautifully using modern paints with their bright color scheme, if necessary;
- reliability of the structure, which can be further enhanced by using brick or metal pillars.
The photo shows a simple picket row. Comfort and a sea of light.
Democratic option for a country house
You can buy such material at almost any construction market or supermarket. A picket fence made of other materials (or) can be ordered on a turnkey basis or made with your own hands. A fence calculator can be found on websites for builders. To calculate approximate cost, it is enough to simply take measurements.
How to make a picket fence can be found in the information space, but any zealous owner knows perfectly well the technique for constructing a simple and durable fence. He would prefer, having purchased materials, to begin installing the fence in order to be proud of the fence he made with his own hands.
Original and beautiful hedge
Preparation of material
The future builder has 2 options: he can buy ready-made slats, processed in a special way, required parameters(in extreme cases, you will have to trim it a little) and begin installation on the day of purchase. Craftsmen who have equipment prefer the second, more complex way: they make pickets with their own hands.
Drawing for installation of the structure
DIY installation
The design of an ordinary fence is extremely simple. Strong pillars are dug in at a distance of 2 meters from each other, capable of withstanding the weight of the picket fence even in wet(wood becomes heavier when wet). Holes are dug under them, with a depth of 70 cm (for strength, a meter is possible). To make the fence beautiful and even, the holes are first marked with pegs, and string is pulled between them.
The distance is measured with a tape measure; it should not exceed 3 meters.
This type of fencing will last a long time.
Installation of posts and guides
Pits for posts must be equipped accordingly, taking into account the type of soil. They can be made with a drill or dug, this is not important, but sand and gravel must be poured onto the bottom and compacted thoroughly before installing the post and making concrete pouring. For a simple fence at the dacha, you can do without concreting. And for the strength of the structure, reduce the distance between the supports by a meter.
Installation option without concreting pillars
But best option- concrete the pillars so that after installation you do not have to deal with repairs as a result of unfavorable conditions weather conditions. Experts are sure that wood rots faster in concrete, so it is better to lay sand and gravel, carefully compacting each layer. The pillars are additionally treated for strength. Bitumen is used as a democratic option.
Set of picket fence sections
The logs are attached to a wooden post, but do not forget that we install them only after the concrete has hardened thoroughly. Metal brackets are used to fix them. There are different types of fences and to attach them, if the design is simple, people use screws or nails.
Another installation diagram
How to correctly assemble the board part directly is also decided in different ways:
- The block of crossbars and picket fence is assembled on the ground, and then attached as a whole to the supports.
- The logs are installed on poles, and the pickets are nailed to the finished frame.
For a simple fence that allows light to pass through, the optimal set is in sections. It makes it possible for several builders to work at once: some assemble sections, others attach ready-made panels to the veins.
Picket fences are an eternal, timeless classic. Due to its low cost and ease of installation, installation of such a fence is accessible to any summer resident. In the article we will tell you how to install a wooden picket fence, talk about the choice of materials, their preparation, and the stages of creating a fence.
Advantages and disadvantages of picket fences
Picket fence lets through sunlight and does not produce streaks of strong shading.Today's construction market is replete with materials for fencing: corrugated sheets, concrete stacked sections, polycarbonate and much more. A wooden picket fence may seem rustic and rustic in comparison. But this material has a number of undeniable advantages:
- it fits harmoniously into the countryside landscape;
- allows you to create an airy and openwork, but at the same time durable structure;
- shades the area a little;
- inexpensive;
- easy and quick to install.
Choosing a picket fence
In order for the fence to serve for a long time and be strong enough, the choice of material must be approached responsibly. When purchasing, you need to pay attention to the following points:
It is very important to avoid the following mistakes when choosing a picket fence:
- Buy material from low-quality wood. Any defects - black spots, knots, mold - will affect the strength and service life of the fence. It is necessary to reject pickets with signs of cross-layering - a wood defect in which the fibers deviate from the longitudinal axis.
- Buy dyed material. Unscrupulous manufacturers often hide the above-described defects under paint.
- Buy material without taking into account the terrain. Wood different breeds behaves differently under conditions high humidity. If country cottage area located in a low-lying area or in an area where it often rains, it is worth paying Special attention at this moment.
For operation in such conditions, it is better to choose a picket fence from the following types of wood:
| Breed | Characteristic |
| Spruce or pine | Light wood shade. High resistance to rotting and splitting. There may be resin pockets, reducing the strength of the picket fence. |
| Aspen | A popular type of wood for baths and well log houses. It is practically not subject to rotting from moisture. It is easy to process, resistant to splitting, and has a slightly greenish tint. May be affected by fungus and requires treatment with fungicides. |
| Larch | The rock is extremely resistant to decay and turns to stone in water. The wood is durable, very strong, with a beautiful reddish tint. Difficult to process. |
Tip #1. When purchasing a picket fence, you can ask the manufacturer when the wood was harvested. Practice shows that winter harvesting materials differ more high quality than spring or summer.
Preparation of tools and materials
If you are thinking about a carved decorative fence, at the stage of preparing the materials, pickets are used to give it the desired shape. When starting to build a wooden fence, you need to acquire the following tools:
- jigsaw or hacksaw;
- screwdriver or hammer;
- screws or nails;
- rope and stakes for marking;
- plumb line;
- shovel.
You should also prepare support posts and veins to which the picket fence will be attached. To concrete the pillars you will need a certain amount cement mortar. All wooden elements of the future fence are pre-treated special compounds, preventing rotting and molding:
| Compound | Characteristic |
| "Aquatex Ground antiseptic" | Non-washable alkyd coating with enhanced protection against biological damage. Does not change the color of wood, can be coated with paint, maintaining its properties. |
| "Euro Eco Wood" | Finnish glazing antiseptic from the Tikkurila company. Provides protection for wood from moisture, fungus and ultraviolet radiation for up to 5 years. Does not change the color of the wood. |
| "KSD" | A unique impregnation that provides not only bioprotection, but also fire resistance of wood. Does not wash out, does not change the color of the wood, and can be coated with paint. |
Tip #2. It would be useful to treat the lower part of the support pillars with liquid bitumen. This will provide reliable protection against rotting, even if the supports are not concreted, but simply dug into the ground.
Installation of the base for attaching pickets
As an alternative to concreting, the support beams can be supported on metal piles with a U-shaped flange. Having cleared the area where the fence will be installed, markings are made using stakes and rope. Then proceed according to the following plan:
- At intervals of 2 m, holes are dug for support pillars. Depth – at least 100 cm.
- Drainage from sand and crushed stone is poured into the pits, supports are installed and their strictly vertical position is checked with a plumb line.
- The pillars are concreted.
- The supports are connected to each other by horizontal veins.
As a standard, two veins are made: the lower one - at a height of 20 cm from the ground, the upper one - 20 cm below the support column.
Installation of a picket fence "Duga"
A picket fence is not necessarily a boring rural option with an even top cut. Give the fence interesting view it is possible by mounting the pickets in an arc:
- The pickets are prepared by creating a rounded top cut.
- By adjusting the length of the pickets, the sections are mounted between the supports in the form of a wave.
The horizontal laying of the slats successfully imitates expensive fences made of metal picket fences. The difference with this design is that the pickets are not laid vertically, but horizontally. If this type of installation is chosen, the distance between the support posts must be reduced to the length of the pickets. Another option is to dig additional ones between the main supports. Horizontal veins in in this case not required.
The “Blinds” fence is especially suitable for damp areas, providing them with good ventilation. A rather complex, but very effective type of laying a picket fence - in the form of blinds. However, wooden supports are less suitable for creating such a fence. It is better to take a metal channel and for each pillar tie it in pairs with their “backs” facing each other. Horizontal veins, like for the Ranch fence, are not required.
The installation of pickets is carried out in such a way that they are positioned horizontally, but at a slight angle. The finished canvas resembles half-closed Mediterranean blinds. This design is good because it provides ventilation and light transmission, but at the same time provides excellent protection. inner space area from prying eyes.
Installation of a picket fence “Lattice”
Another non-standard solution– laying a picket fence in the form of a lattice. It is more convenient to tie such a fence to the supports in ready-made sections, so installation takes place “on the ground”.
The “Lattice” fence does not create a feeling of enclosure and harmonizes not only with wooden, but also with brick buildings. - To make a lattice section from a picket fence, you will need a wooden or metal carcass. The strips are cut to the required length and attached to the frame crosswise.
- If you use Lattice to create a fence metal elements, it is better to paint them to match the color of the pickets. This will ensure the visual integrity of the structure.
Current questions about picket fences
There is a special construction formula for this: N=L/(S+d). The value L here shows the length of the fence, S is the width of each picket fence, d is the interval between them. If there is a picket fence standard width 5 cm, which needs to be laid in one layer with an interval of 3 cm, then 125 pickets will be required for 10 meters of fence.
Question No. 2. How to care for a picket fence?
A wooden fence, mounted from well-prepared material, requires minimal maintenance. Once a year in the spring, it needs to be carefully inspected and the pickets that have become unusable should be replaced. Fences older than five years may require stripping old paint and re-treatment with an antiseptic composition.
Question No. 3. Which picket fence is better - wooden or metal?
A metal picket fence (called a Euro picket fence) is more profitable than a wooden one, since its service life is almost unlimited. It's easier to care for - polymer coating it is reliable, and a fence made from this material will have to be painted no earlier than after 10 years. Its disadvantage compared to classic wooden fencing is the complexity of installation.
Question No. 4. How to paint a wooden fence correctly?
First, you need to clean the wood from all contaminants and sand it. If it is not impregnated with an antiseptic, or the impregnation has expired, apply protective composition and left until dry. After this, the wood is covered with a layer of primer. You can skip this step, but you need to remember that the primer allows you to save the base coat. For perfectly even painting, the dried primer layer is sanded and the paint is applied with a roller.
Question No. 5. Is it possible to make a picket fence with your own hands from boards?
Certainly. To keep material consumption to a minimum, you need to take six-meter boards with a thickness of 20 mm. The tools you will need are a jigsaw, a grinder with a sanding disc and an electric plane. The boards are marked by length - usually into four parts of 1.5 m each - and sawed with a jigsaw. If the width of the board is large, each piece is opened longitudinally. The same tool can be used to shape the upper cuts - at an angle, spear-shaped or rounded. The edges of the workpiece are processed with an electric planer, after which the entire surface of the picket fence is thoroughly sanded.
A wooden picket fence is a simple fencing option. A decorative elements will make him very attractive. If you use certain types of wood as a material for the fence, for example, larch boards, you can get an almost eternal fence.
Benefits Overview
Each design is characterized by obvious and hidden advantages/disadvantages. If we consider a picket fence, then first of all we need to highlight its versatility, since the scope of application of such a fence is quite wide: private sector, temporary fencing, delimitation of territory (flower beds, garden, vegetable garden, etc.), any objects, functional fence with protective functions.
In addition, there are other advantages:
- absence of harmful substances, since the material is natural, this means complete safety of its operation;
- acceptable price;
- a simple process of erecting a fence, which allows you to do all the work yourself;
- short installation times;
- strength, especially if a larch picket fence is used;
- aesthetic appeal;
- variety of design solutions;
- does not shade the area;
- combined with other types of materials: brick, stone, metal;
- ventilation of the area thanks to gaps in the fence.
Among other things, fences made of larch or other materials are easy to repair and restore. Therefore, the fence turns out to be literally eternal.
How to choose material?
At the initial stage, you should decide on the tool. To build a fence from a wooden picket fence, you will need a hammer, a saw, a screwdriver, pliers, a tape measure, a building level, and a nail puller just in case. You also need to prepare a screwdriver, a shovel, sandpaper, and a stiff brush.
The amount of materials needed is also determined:
- a fence of small width - made to order or prepared with your own hands from an edged board;
- logs or crossbars on which the picket fence will be attached;
- support posts: made of metal or wood.
In addition, paints and varnishes, sand, crushed stone, cement, wooden stakes and rope for marking, and primer are prepared for the work. It is important to choose the right type of wood for the picket fence. For the fence the best options considered: boards made of larch, oak, alder, beech. With flawless wood processing and fence installation, you can get a permanent fence.
To add strength to the structure, you need to use logs with a section of 40x20 mm or 40x25 mm. Metal poles or timber can be used as pillars. Recommended cross-section dimensions: 60x60 mm, 80x80 mm. If the support has round section, the diameter must be more than 60 mm. For a wooden fence, a distance between posts ranging from 2 to 2.5 m is sufficient. Another important nuance– a board made of larch or other material must be well dried.
Sequence of work during installation
You should start by cleaning the area, as well as marking it. It is necessary to prepare the surface: remove large debris, dried weeds, if necessary, level the soil if there are holes or mounds. Marking is carried out using stakes and cord. First, the perimeter of the future fence is determined and the cord is pulled with your own hands. Then the points for installing the supports are outlined.
Wooden fence diagram
For a wooden fence, there are two main ways to attach posts: the hole is filled with soil; filled with concrete. The second option is more reliable. Holes in the ground can be drilled using garden borer or dig with a shovel, which is not always convenient, since the recommended depth of the holes is up to 1.5 m.
It is quite possible to work with a drill without inviting a professional, with your own hands. When installing supports in holes, it is recommended to check their position with a building level. For reliability and to secure the pillars, spacers are used.
If you plan to use wooden poles, the lower part, which will be immersed in the ground, is covered bitumen mastic to avoid wood rotting. You also need to treat the racks with an antiseptic solution yourself.
At the base of the pits there should be a gravel cushion, a sufficient layer thickness of 20 cm. After pouring concrete, you need to wait some time until the solution dries completely, as a rule, 3 days is enough. And you can start installing the crossbars.
Assembly is carried out in two ways: sequentially or in sections. In the first case, the logs are first installed, then the board is made of larch or another type of wood. The second option involves separate installation of a section of joists and fences, after which ready block Install it on supports with your own hands.
For fastening wooden structure A special part is used for metal pillars - in the form of a cross from a corner or channels. It is welded to the post if it is not possible to secure it with bolts. And in places of contact with wooden crossbars, a standard set of fasteners is used.
Finishing the fence
To make a literally eternal picket fence, it is recommended to take care of the wood covering. There are only two types involved: primer and paint/varnish. If the task is to change the natural shade of wood, paint is used. But it's transparent finishing material allows you to preserve the natural color and structure of the wood.
First of all, you need to prepare the surface of the boards for painting. Improved adhesion will be ensured by roughness. To do this, you need to sand the surface of the wooden fences with your own hands using sandpaper.
End part support posts must be closed with special plugs or metal plate. The upper edge of the fences is sanded and coated with moisture-resistant compounds.
Of course, this requires regular maintenance: removing peeling paint, restoring protective covering. When preparing the material with your own hands and erecting a fence without involving professionals, the cost of the fence will be small.
Just 50 years ago, wooden picket fences could be seen around most country houses. But they were the same vertical structures. Nowadays, a reliable and durable picket fence can be erected in various configurations and even in combination with other materials. Fences are quite easy to erect with proper calculation and preparation of the material. He will serve reliable protection plot, and decorate it with your appearance.
Advantages
Everyone wants to make their home beautiful, and fencing is the element of a suburban area that people pay attention to first. Therefore, it is important to give this element maximum aesthetics. One of the materials that falls into the category of aesthetic and pliable for unique buildings can be considered wood. If you have the skills to work with wood and the desire to build a fence around the site yourself, then the question of how to make a picket fence will be resolved by itself.
A picket fence installed with your own hands, with some imagination and a little skill, will look great on any terrain and against the background of any building.
Reliability wooden fence depends on the selected type of wood for its manufacture, as well as on the size of one picket fence. If you do right choice, then the fence will last for many years.
News proper care It's not difficult at all to follow him. All the owner has to do is apply protective substances to the surface in a timely manner. It is also important that the picket fence almost does not shade the area and has excellent air throughput. Near it you can plant any plants that need sunlight.
Basic types of installation
Vertical and horizontal
Traditionally, when making a wooden fence, the pickets are installed vertically. But horizontal installation is also possible. This design is made of several boards or poles. This type of fencing is otherwise called “ranch”. It is well suited for creating a rustic style.
You can even tilt the slats to one side, and then you will get an even more unusual fence. And given that the angle of inclination can be different, there are countless options for creating unusual structures.
Checkerboard
Attractive appearance It also has a checkerboard fence. It looks beautiful not only from the outside, but also from the inside. Location feature wooden parts consists in the fact that the pickets are installed on both sides, but are shifted in relation to each other. The gap, on one side, is closed by a rail on the other, and vice versa.
Preparation and calculation of material
A wooden picket fence is so easy to install that you don’t even need many tools to install it.
To make the picket fence itself, in addition to wood, you will need:
- fastening elements - nails or screws;
- hand hacksaw or jigsaw;
- screwdriver;
- protective substance for application to surfaces. These products include water-repellent and antiseptic impregnation, as well as varnish, stain and paint;
- shovel for digging holes for support pillars;
- a hammer, if nails were chosen as fasteners;
- building level so that all fencing elements are installed level.
You can buy wood and make pickets from it yourself, or you can buy a ready-made picket fence. In the latter case, you will have to pay more, but there will be less work.
Note! Before making a picket fence, it is important to correctly calculate the wood material. Based on the perimeter of the territory, as well as the width of the pickets and the gaps between them, the required quantity is calculated wooden elements. For example, if the width of one picket fence is 4 cm, and the width of the gap is 6 cm, and it is planned to make a fence 30 m long, then to calculate the quantity, 30 m must be divided by 10 cm, that is, by the total width of one gap and one picket fence.
How much picket fence is needed depends on the chosen design. For example, if a fence is built with gaps, it will require less material than a solid structure of the same length.
It is important not to forget to calculate everything in the same unit of measurement. It’s easier to express meters in centimeters, and then 3000 will need to be divided by 10. After calculation, it turns out that such a fence will require 300 pieces of picket fence. In addition to the material for making the picket fence itself, you will also need beams for supports. Such poles must be long enough and strong. You need to remember that they will submerge at least half a meter.
Laying picket fences in a checkerboard pattern
You can install a picket fence by working in the following order:
- Marking. It is necessary to determine where the support pillars will be located. A strong rope stretched around the perimeter can help in this matter. Optimal distance between supports - 2-3 meters. Taking this into account, it is necessary to make marks on the ground in those places where holes will be dug.
- Digging holes. Their diameter should be greater than the diameter of the support column. Calculation of the depth of the pit depends on the height of the future fence. Most often it exceeds 1 meter.
- Installation of pillars in prepared recesses. If they are wooden, you can simply get by by applying them to the surface. protective equipment. It is possible to lay a wooden picket fence using metal poles in this case, you will have to pour concrete mixture into the recess.
- After the supports are installed, you can begin to attach veins or slugs to them - thicker boards that should be located parallel to the ground surface, that is, perpendicular support pillars. At least two veins are required. Their number depends on total height buildings.
- The calculation of the distance between them may also vary. This depends on the height of the fence being mounted and on the method of attaching the pickets to them. The main thing is not to bring the lower one closer to the ground less than 25 cm, and the upper one should not be raised too high so that the edges of the nailed pickets rise above it by at least 25 cm.
- When the installation of the veins is completed, you can begin attaching the picket fence itself. When installing the very first picket fence, it is better to use a building level so that the entire fence does not turn out crooked. If there is no level, you can use a plumb line instead, which is easy to make yourself using a heavy weight and thread. To attach all the other pickets, it will only be enough to determine the width of the gap. You can make it equal to the width of the pickets and easily measure the required distance by applying one of the slats. But you can specially make a strip of the required width, and then use it only to make gaps.
- When the slats are nailed along the entire length of the fence, you can be content with the work already done, since, in essence, the classic fence is already ready.
To make a “chessboard”, you will need to go to the other side to install another row of pickets. In order to avoid distortions and inaccuracies, it is necessary to correctly install the first rail. It should be located strictly opposite the gap between two adjacent pickets on the other side. After installing this rail, all that remains is to nail down all the others, measuring the length of the gaps using a template.
Painting secrets
Painting the finished structure
Painting a picket fence with your own hands is not difficult, but you still need to pay attention to the details. The durability of not only the paint layer, but also the entire structure, depends on the quality of this work. To apply a high-quality coating, you need to clean the wood from contaminants and then prime it with a substance that can penetrate deeply into the structure.
Several layers can be applied. Before applying the next one, you must wait until the previous layer has dried. Many manufacturers can assure you that there is no need to prime the surface before painting. But, nevertheless, it is better not to pay attention to this statement and apply a primer. This will have a positive effect on the durability of the wood and on the savings of the base coating.
It is also better to paint in several layers. After applying the first layer, it is better to sand it with sandpaper after drying. For painting, it is better to use a brush rather than a roller, as this will allow you to reach hard to reach places. But if you want to speed up the process, you can use a roller, but you must keep in mind that later you will still have to paint many places with a brush.
Ecological natural material is considered the best for construction and home improvement. First of all, it is harmonious with the nature of man himself, and also simple to operate and easy to construct.
It's about wooden picket fence, which, along with modern fences and fences, does not lose its relevance and novelty. And what is also important, it is quite possible to make a fence from a wooden picket fence with your own hands, at your own discretion.
Traditional fence: pros and cons
Fence owners have already assessed all the pros and cons of fencing. The scoring points for picket fences are:
- low cost of materials;
- in principle, simple installation, which, perhaps, can be complicated by personal preferences in design and decor;
- the beauty of the structure as a whole, which will give the owner’s site originality;
- Wide selection of wiring diagrams.
There will also be minuses, especially for those who don’t like extra hassle:
- Wood is very short-lived and requires constant care.
- In order for such a fence to please you for many years, it is necessary to paint it annually, and, if necessary, carry out partial repairs.
- It should also be taken into account that a wooden picket fence is not a large metal fence, so it is unlikely to protect against intruders.
- Wood is a highly flammable material and can be easily damaged mechanically.
The service life of a tree varies from 5 to 10 years and depends on many factors: climatic conditions, location and soil on which it is installed.
Select the material - let's get to work
Among existing species wood most suitable for construction wooden fences Ash, mulberry, acacia, oak, aspen, and Siberian larch are considered.
Details of the future structure can be purchased ready-made - by purchasing a picket fence on the market, or you can make it yourself from boards.
But in one way or another you need to take into account the readiness of the wood, because the raw material, not normally processed, will subsequently become deformed, and there will be no defects, knots or cuts.
Before installation, all parts of the fence must be treated with an antiseptic in order to extend the service life of the product as a whole.
The next stage should be choosing a fence fastening method and his appearance. How to lay the picket fence: horizontally, vertically or with a ladder, lattice, in a checkerboard pattern - the choice is up to the owner.
- Classic fence.
- Ladder.
- Lattice.
- Chess.
- Vertical.
Familiar to us from childhood: vertical posts and longitudinal logs, onto which boards are attached with a small gap between them.
Very original way fastening the same vertical boards on joists, only overlapped (with slate). Very good option, because with it the fence looks equally beautiful both outside and inside.
This sectional fence, where each part must be manufactured separately and then attached to the main supporting mount.
The section is a knocked down square wooden frame, onto which boards are subsequently attached perpendicularly in two directions (a schematic prototype of a conventional mesh design).
It is an analogy to a classic fence, only on both sides. A row of front boards, and towards it the gaps of the gaps are closed by a row of back ones.
Back at the core classic scheme. Wide longitudinal logs are placed between the supporting pillars. One significant nuance of such a fence is that it cannot be called a fence due to the low height of the structure; it is rather exquisite decor for flower beds and rose gardens.
My own master
In the working notebook, the master’s own self should first of all be reflected - length and planned height future fence. You should decide whether the fence will have a monolithic base or a small gap between the ground and the fence.
You may be interested in how to make a fence from a metal picket fence.
Bringing beauty and finishing touches
There are many ways to make your fence beautiful and original.
The most in a simple way is to paint the fence in two or three colors highlighting sections of the triangular top, for example as shown in the photo.
However, you can work a little in pursuit of beauty:
- First of all, it can be external decor. Additional slats with a specific pattern are stuffed onto the main picket fences.
- A more difficult decoration method to perform at home. When each board is pre-cut at a certain angle, during assembly it forms a wavy or figured relief.
- Various removable parts attached in sequence to the tops of the fence are also acceptable.
- Can also be used uneven height method, attaching picket fences to the joists in a wave-like manner or with a certain slope.
A wooden picket fence will certainly decorate any country house or suburban area. First of all he will element of the owner's personal pride, since it will be made with one’s own hand and in an original way.
Watch the video to see what types of decorative picket fences there are and more:
