From plastic bottles You can make a huge number of all kinds of crafts. They can be beautiful, useful, unusual, or all three.
A flight of fancy and a little ingenuity is all you need to make a good craft.
Such material as a plastic bottle is probably found in every home, which means everyone can make good craft, so let's get started.
Craft from a plastic bottle. Butterfly.
You will need:
Transparent plastic bottle (preferably light)
Butterfly stencil
Felt pen or outline for stained glass
Scissors
Glue (preferably "Moment")
Glass paints
Acrylic paints
Wire
1. Cut off part of a plastic bottle, place a butterfly stencil and outline it with a felt-tip pen.
2. Cut along the outline.
3. Color and decorate the butterfly.
4. Bend the wings of your plastic butterfly. This must be done so that the outline is on top.
6. Using glass paints or acrylic paints, begin decorating the butterfly.
7. Using beads of different sizes, you can make the body of a butterfly, and antennae can be made from wire. The glue will help hold it all together.
8. You can decorate the butterfly with sparkles, rhinestones, beads, etc. on top.
This gift can be decorated with gift wrapping or placed on the refrigerator door.
Plastic bottles. DIY crafts. Turtle with candies.
You will need:
Plastic bottle
Velvet paper
Candies
Clusters from tablets
White paper
Scissors
Thick paper or cardboard
1. Cut off the bottom of the bottle - this part will be used as a shell.
2. Preparing a turtle stencil. Draw a silhouette on cardboard and cut it out.
3. Use a stencil to draw a silhouette of a turtle onto green velvet paper. Cut it out and glue it to the cardboard part.
4. Making eyes for a plastic turtle. Prepare a pill cluster and peel off the foil backing. Next, you need to cut out 2 fragments for the eyes from the cluster.
5. Prepare white paper and use it as a backing, and use black velvet paper to cut out the moving eyes. Next, simply glue the structure together.
6. We collect and glue all the details of the craft. Use glue to attach the turtle's eyes and mouth. Fill the bottom of the bottle with sweets and tape it to the turtle.
Crafts from a plastic bottle (master class). Toy "Catch the ball".
You will need:
Flexics
Ping pong ball
Scissors
1. Prepare your flexics orange color and cut out the petals for the flower.
2. Using glue or double-sided tape, attach the petals and string to the bottle.
3. Attach a table tennis ball to the other end of the thread.
That's it - play by trying to catch the ball in the flower.
How to make a craft from plastic bottles. Vane.
For those who want to know which way the wind blows.
You will need:
Plastic bottle (preferably a pot-bellied one)
Scissors
1. Prepare a clean bottle and use scissors to cut windows in it. It is desirable that they be approximately similar to the blades of a weather vane.
2. Attach the weather vane to suitable place- on the balcony. This can be done using an iron pole. Make a hole in the bottom of the bottle and put a pole on it.
Now you will always know which direction the wind is blowing.
Crafts from plastic bottles for children. 3D glasses.
You will need:
Transparent plastic bottle
Unnecessary sunglasses
Colored markers
Scissors
1. Cut two parts from a plastic bottle as shown in the image.
2. Take the glasses out of the glasses and outline them on the cut part of the plastic bottle.
3. Use a red marker to color both sides of the left glass.
4. Color the right glass with a marker Blue colour on one side and green on the other.
5. Insert the glass back and enjoy 3D pictures.
Children's crafts from plastic bottles. Frog.
You will need:
2 plastic green bottles (volume 2 liters)
Scissors, knife
Centimeter tape
Felt pen
Needle and thread
Acrylic paint
Brush
Wine bottle stopper
1. First you need to wrap plastic bottles with tape at a height of about 7 cm from the bottom. The higher you want to make the frog, the more you need to move away from the bottom, thereby making the box more spacious, but not very proportional. Next, use scissors to cut off the bottoms along the top edge of the tape.
2. Using a measuring tape and a felt-tip pen, make marks for the future seam. You need to mark on both parts at a distance of 5-7 cm from the edge, leaving 1 cm between the marks.
3. Make holes at the marks with an awl. Try piercing the plastic through a napkin after folding it in half, so the bottle will not slide, which will prevent you from getting hurt. When the holes are made, remove the tape.
4. Prepare a zipper and wrap it around one of the parts of the future craft. Temporarily attach it with tape to the body.
Sew the fastener with stitches along the holes made with an awl.
When you have sewn the zipper in a circle, remove the tape. Next, tie and secure the ends of the thread and trim off any excess.
Unzip the zipper and sew the other half in the same way.
5. The frog's eyes can be made from a wine bottle cork. You can paint the cork in green color. Once you have glued the eyes to your box frog, leave the glue to dry.
Crafts from a plastic bottle (photo). Bracelets.
Crafts from plastic bottles (photo). Cherry blossom.
Crafts from plastic bottles (instructions). Casket.
Palm tree made from plastic bottles. Option 1.
You will need:
Brown plastic bottles (1.5-2 liters)
Green plastic bottles (the larger the bottle, the more luxuriant the leaves)
Thick rod (for the base of the trunk)
Awl or drill
Scissors
1. To make tree bark, you need to prepare brown plastic bottles and cut them into pieces 10-15 cm high.
3. To make palm leaves, you need to cut off the bottoms of green bottles. On one workpiece you need to leave a rigid neck with a lid, since it will play the role of fastening.
4. Start cutting out the leaves - you need to do this so that there is about 5-7 cm left to the edge.
5. Start collecting green blanks, putting them on the same blank with a neck. Screwing the lid will hold everything together and you will have a palm tree crown.
6. Now you need to make connecting holes. Their diameter must match the diameter of the base rod. Such holes can be made using a drill or a hot awl. Make a hole so that the crown of the palm tree does not fall through.
7. We begin to collect the palm tree. When you have strengthened the rod, begin to place blanks of brown plastic bottles on it. The design ends with a green crown.
Summary: DIY crafts from plastic bottles for children. Crafts from plastic bottles for the garden. Crafts from plastic bottles for kindergarten, photo. Flowers from plastic bottles. Ideas for crafts made from plastic bottles.
What can be made from plastic bottles? In this article we will tell you what crafts from plastic bottles you can make with your own hands with your children. Plastic bottles - universal material for making crafts. We will tell you how to do:
Vases made from plastic bottles
Crafts for the garden from plastic bottles
- garden crafts made from plastic bottles
1. Crafts from plastic bottles. Toys made from plastic bottles
Catamaran made from plastic bottles
By connecting two plastic bottles together with electrical tape, you can make a toy catamaran for dolls.
Craft from a plastic bottle for children - fountain
On a hot summer day, you can't think of a better entertainment for children than playing with water in the fresh air. From an ordinary plastic bottle you can make an educational toy for experimenting and playing with water in the country or on the beach.
Make several holes in the bottle using a sharp object. In the photo below, the holes are made in the center of the bottle, but in fact, it is better to place them at the bottom of the bottle. In this case, the maximum volume of water from the bottle will be used. Plug the holes with your palm and fill the bottle to the top with water. Screw on the lid. Remove your hand from the holes. Surprisingly, water does not pour out of the bottle through the holes.
Now unscrew the cap slightly and you will see water begin to pour out of the bottle through the holes. It is the air entering through the neck of the plastic bottle that displaces the water from the bottle.
This toy can be used as a washbasin in the country.
Crafts from plastic bottles for children using the papier mache technique.
You can make interesting crafts for children using papier mache technique from plastic bottles. Boys will probably be interested in a homemade airplane made from a plastic bottle, and girls will be able to make a whole home zoo.
The principle of making toys from plastic bottles using the papier mache technique is as follows. First, the frame of the future craft is made from cut and whole bottles. Everything is held together with tape. Additional parts are cut out of cardboard and also attached with tape or tape.
After this, you need to tear or cut the paper into small pieces. This can be either regular printer paper or special corrugated paper for children's crafts. Dilute PVA glue with water in a 1:1 ratio. Then, dip each piece in diluted glue, attach it to the frame of bottles. Thus, cover your craft with 4-6 layers of paper.
When the glue is dry, paint and decorate your plastic bottle craft.
How to make an airplane from plastic bottles >>>>
From plastic bottles with your own hands. Cow >>>>
Children's crafts from plastic bottles. Tropical fish >>>>
Children's crafts from plastic bottles. Crocodile >>>>
And a few more links to master classes on making crafts from plastic bottles for children:
2. DIY plastic bottles. Vases made from plastic bottles
The easiest way to make a vase from a plastic bottle is to simply cut off the top of it and decorate it. In this case, it is advisable to use an iron to round off the homemade vase the edges. It will be more beautiful and safer this way.
To round the edges of a vase made from a plastic bottle, place a sheet of paper on top of it and bring a hot iron (the paper is needed to prevent the plastic from sticking to the sole of the iron). The sharp edges of the bottle high temperature wrap up. Be careful - do not hold the iron for long and constantly check what is happening under the paper. Link >>>>
We would like to invite you to make a creative vase craft. To make it you will need several plastic bottles. You can use one large bottle (1.5 liters) and 4 small bottles (0.5 liters). To make a vase from plastic bottles you will need plastic glue or a glue gun. For instructions on making a vase from bottles, see the link >>>>
You can make a cute felt case for a plastic bottle. Insert the bottle inside the case - the vase from the plastic bottle is ready!
You can make a beautiful, “airy” vase from a plastic bottle if you first hold the cut bottle over the fire to give it shape. Then make numerous holes in it with a soldering iron. But it’s still better not to store food products in it!
And one more idea on how to quickly and easily make a vase from a plastic bottle.
3. Crafts from plastic bottles photo. Flowers from plastic bottles
Making flowers from a variety of materials is one of the most popular types of crafts and needlework today. You can make original artificial flowers with your own hands from ordinary plastic bottles.
Detailed wizard for a class on making flowers from plastic bottles, see the link >>>> To make this craft from plastic bottles, you will need, in addition to plastic bottles different colors, you will also need a candle and a glue gun. However, instead of a glue gun, you can use just glue. Attention! Be very careful when working with fire!
Separate instructions on how to make flower stems from plastic bottles can be found at the link >>>> To do this, you need to cut the plastic bottle in a spiral to get a narrow strip of plastic. Then twist it over the fire.
4. From plastic bottles with your own hands. Boxes and boxes made of plastic bottles
Take two bottoms from plastic bottles and glue a zipper between them glue gun or glue for plastic. The coin purse is ready!
You can also sew zippers onto bottles.
Decorate the box with a flower, also made from a plastic bottle. We described above how to make flowers from plastic bottles.
From a plastic bottle you can make a beautiful packaging box for a small gift for a loved one.
Mothers or grandmothers who know how to crochet can make convenient and practical boxes from plastic bottles for storing children's books.
Detailed instructions For making this craft from plastic bottles, see the link >>>>
Link-2 >>>>
5. Crafts from plastic bottles master class. Jewelry made from plastic bottles
Who would have thought that plastic bottles can be used to make stylish jewelry! Bright, fashionable bracelets or delicate, airy necklaces.
Bracelets made from plastic bottles
Cut a plastic ring of the thickness you need from the bottle. Wrap it with colored yarn or elastic fabric, cover it with lace or trim it with thread. Stylish, summer decoration is ready!
You can also buy inexpensive beads and tie them to a plastic ring with colored yarn.
For a detailed master class on making this craft from a plastic bottle, see the link >>>>
Above we talked about how to make flower stems from a plastic bottle. These beautiful spirals can also be used to make jewelry from plastic bottles.
You can make a beautiful necklace from a plastic bottle using the same principle as flowers. Cut from the bottle various shapes petals and leaves. Hold them over the fire for a short time until they take shape. Put them on a fishing line.
And from the bottoms of plastic bottles you can make a stand for jewelry.
To make this craft from plastic bottles with your own hands, you will need, in addition to the bottles themselves, a threaded metal rod, as well as nuts and washers.
6. Plastic bottles crafts for the garden. Crafts from plastic bottles for the garden
Bottom plastic bottles will make beautiful decorative apples and pumpkins. To do this, you need to cut off the bottoms of two bottles and paint them with acrylic paint, and then fasten them together. You can do without paint by placing corrugated paper cut into strips inside crafts made from plastic bottles. Link >>>>
For the next craft made from plastic bottles for the garden, you will need a very large number of bottles.
To make curtains from plastic bottles for country house, you need to cut off the bottoms of the bottles and fasten them together with fishing line or silk threads. The bottoms of the bottles need to be cut along the edges in such a way that you get flower-shaped blanks. The edges of such blanks can be trimmed a little sandpaper or scorch over a fire so that there are no snags on the cut.
Using an awl heated over a fire, we pierce holes for threading fishing line or thread. Using knots we fix the position of the workpieces on the thread so that they do not bunch up. The work is painstaking and delicate, but such a curtain does not require financial costs.
Here's another one useful application plastic bottle in the household. 
A useful craft made from plastic bottles for the garden is a homemade broom. A broom made from plastic bottles is a necessary thing in the private sector, especially during leaf fall.
7. Crafts from plastic bottles for kindergarten
Material prepared by: Anna Ponomarenko
Other publications on the topic of this article:
Plastic bottles are not just containers for water, but also an excellent material for creativity and. Some craftsmen manage to make something out of them that is difficult for many to imagine. All you need in this matter is the actual material, scissors, sometimes paint, glue and free time. It would also be a good idea to turn on your creativity and stop looking at the container of your favorite soda as an ordinary thing. So let's get started!
Piglets-pots
This craft is easy to make, so that’s where we start. You can plant flowers in this for the summer or use piglets as a container. This will revive anyone, especially children will be happy with this creation.
Tools and materials:
- Five liter plastic bottle. Their number is based on the number of piglets that will be created. 1 container – 1 pig.
- A sharp knife, a stationery knife is most convenient.
- Bottles - 0.5 l or 1.5 l, 4 pieces for each pig.
- Glue.
- White enamel and red or pink paint.
Manufacturing sequence
The container should be rinsed and dried, and if there are labels on them, they should be removed as they will get in the way. If you decide to make a flowerpot, then you should cut a hole in the upper part so that there is room to plant flowers and add soil. If you are creating a garden sculpture, skip this step.
Smaller bottles will be used to create the legs. They need to be cut from the neck by 10-15 cm or to the length that is needed.
Advice! The larger the hooves, the taller the pig will be. Moreover, containers should be selected of the same volume so that the limbs come out smooth and beautiful.
Advice! To make it more convenient to glue the legs, you should cut each neck at the widest point with a fringe and bend the edges.
Now the important task is gluing. For this you can use:
- Glue "Moment".
- Glue "Titan".
- Terpomistolet. It is the most convenient to work with, although hot silicone can deform the plastic, so it should be handled with extreme care.
Advice! It is more convenient to glue two limbs at a time, since after applying the adhesive composition they need to be held for some time for high-quality bonding. Use glue according to the instructions.
After everything has dried, you can cut out the ears; they will be made of the same material as the whole pig. It is convenient to cut them out from the lower parts, since there is a factory bulge there. The shape is natural, the size is arbitrary. For ease of gluing, you can also make a fringe at the bottom - like on the legs.
On a note! It is most convenient to glue if you are making flower pots. In this case, the cuts must be glued to the container from the inside with the same composition.
Now creative stage– painting. Natural color – pink, but you can use another one if you wish. Experienced craftsmen It is recommended to use it, it fits well on plastic and is more durable. You only need to tint the outside, but carefully so that the color of the bottle does not show through. It is very convenient to hold it by the lid-pocket. Don't forget to cut and glue the tail, it is also made of plastic, it is more convenient to paint it before gluing. You can draw the eyes or buy them; these are sold in any sewing store.
Important! If the pig will be used as flower pot, it is necessary to make holes in the lower and side parts for the free outflow of water.
Fly agarics for garden decoration
A detailed master class on making fly agarics from bottles is on video:
It would seem that a plastic bottle is such an ordinary thing, but once upon a time it was worth its weight in gold - our grandparents carefully stacked the precious container on the balcony to use instead of a milk can or a jar for storing compote. Nowadays PVC bottles are a dime a dozen, so humanity has become thoughtful, because soon, due to plastic containers, there will be nowhere to step. How to use all this abundance of plastic for good? The most amazing ideas using the costs of the food and chemical industries are floating islands and huge installations, residential buildings and energy-saving systems created from a lot of unnecessary plastic containers. We invite you to join the global plastic bottle boom. Rate original crafts for a garden from waste packaging, which we offer you as an ideological basis for further creativity on the path to creating an amazing and unusual country house design.
The burning problem of all summer residents is the construction of a house and auxiliary buildings on a garden plot in conditions of a small land plot and limited funds. In addition, the seasonal purpose of the dacha does not imply the construction capital buildings"for centuries".
So, enterprising people decided to use a prosaic plastic bottle as a building material. The walls of houses, gazebos, greenhouses, and other garden structures are laid out traditionally - in a checkerboard pattern using cement mortar, only instead of bricks, unnecessary plastic containers filled with sand are used.
To support this not entirely familiar eco-style, you can make a variety of crafts from bottles for the garden so that the design of the site is decided in a single key. Let's look in detail at how you can make your life simpler and more comfortable with the help of PVC containers.
Country house
Despite the apparent simplicity of building a building from plastic containers, there are some nuances that you need to take into account if you decide to build a country house with your own hands. Here are a couple of useful tips:
- Place a reinforcing mesh between the rows of masonry - the adhesion of the solution to the surface of the bottle will improve.
- Do not forget that plastic does not come into contact with cement like brick, so make small holes in the container - this way the solution will begin to interact with the sand inside the bottle and the wall will become stronger.
- In progress masonry work secure the bottles with rope or wire so that the rows do not move apart.
Please note that plastic tends to deteriorate under the influence of frost and heat, especially from temperature changes, so be prepared that after some time - 5-10 years, the walls of the building will begin the “countdown”.
Using PVC bottles as a building material, you can build an economical house in the country
The cylindrical shape of plastic bottles allows you to build houses and gazebos that are round in plan
Besides load-bearing structure houses made from plastic containers, this universal building material, as it turns out, can be used for roofing work. We offer you two options for roofing from used PVC containers:
- Plastic tiles. To make this simple roofing covering, you need to compress plastic bottles. If this process is carried out without slightly heating the plastic, the container will simply crack, so the easiest way is to lay the raw material out in the sun and then flatten the containers. PVC installation The installation of modules is carried out using ordinary self-tapping screws to the frame with laying of the material in several layers. From such tiles you can easily form a cone-shaped roof for a gazebo or bathhouse.
- Plastic slate. From the cylindrical part of a plastic bottle it is quite easy to make something like slate covering for the roof. To do this, you need to cut off the bottom and neck of the container, cut the middle part of the container lengthwise and in half, and connect the resulting PVC elements with glue, forming a wavy surface.
If you decide to build a house made of wood, brick, or there is already a residential building on your summer cottage, pick up a plastic bottle and show your imagination - decorate the facade unusual decor from plastic plugs. Complex geometric patterns, floral patterns or slightly naive “cartoon” animals - choose any style that suits your spirit.
It is quite easy to make a roof for a summer house from plastic bottles - either in the form of tiles or like slate
Bright plastic lids from used containers will give the facade of a country house an expressive color
Bottle cap decor for the facade country house will give the building individuality
Gazebos, greenhouses, pergolas
The most rational use of plastic bottles for the garden is not only crafts designed to decorate it, but also more significant things, for example, greenhouses or. Why buy expensive polycarbonate to build a greenhouse if the PVC from which the containers are made is practically the same material?
Why equip a greenhouse with glass that is even more expensive than laminated plastic if there are unnecessary bottles? Refracting Sun rays, PVC containers perform the same tasks as glass and polycarbonate, moreover, they are the most economical option for the construction of a greenhouse, whichever one can find.
An economical option for arranging a gazebo or greenhouse in the country - building from plastic bottles
If you are bored with the traditional rectangular gazebo, make it in the form of a hemisphere using a metal frame and plastic bottles
Having built a frame of wood or metal, arm yourself with a hot knitting needle, drill or hammer with nails. One way is to make holes in the bottom and cap of a plastic bottle and place the plastic containers on a fishing line or wire, the length of which will be slightly greater than the height of the building. Stretch the resulting elements and secure them to the cross members of the frame - this way you will form the walls of a greenhouse or gazebo. Additionally, you can fix the vertical modules in the transverse direction by tying the bottles within one row with wire. Using containers different color, try to create some kind of ornament - this way you will diversify the colorless mass of walls made of transparent plastic.
What else can you build from plastic bottles for your garden? The most easily erected version of a small architectural form made from plastic bottles in the garden is a lightweight gazebo, which usually serves as a frame for climbing plants. However, despite the fact that in spring and summer the pergola structure will be hidden by climbing roses or ivy, in winter its frame will be exposed and will not look very good. To avoid this phenomenon, you can decorate the pergola structure with plastic bottles of a natural shade - brown or green. The brownish colors of PVC vaguely resemble wood, while the grassy colors will enliven the appearance of the garden in the cold season.
Fences, railings, gates
You can save a lot of money if you use plastic bottles for fencing. garden plot. Using the same principle that was described in the construction of the gazebo, instead of corrugated sheeting, chain-link mesh or polycarbonate, use plastic containers to fill the space between the fence posts.
With a little creativity and diligence, the border of your garden will become not only impassable, but also extravagant and eye-catching. If the fence has already been erected previously, a floral decor made from plastic bottles will give it a new sound - the most natural option for garden.
To support country houses made of plastic bottles, build a fence using the same containers for the integrity of the landscape design
Multi-colored flowers cut from plastic bottles will refresh and decorate an old fence or country house
Carport
The eternal problem of car owners is allocating space for plot of land for parking a car or several vehicles - bicycles, scooters or ATVs. The design of a compact private or country house does not always include space for a car, so there is a need to build a separate garage or shed. The construction of these structures is expensive and beyond the means of many, so the car sits under the scorching sun, exposed to the winds, rain and snow. Ordinary plastic bottles come to the rescue in this situation - waste, useless containers that allow you to experiment without fear, without fear of spoiling the building material. If something doesn’t work out and the bottle becomes unusable, you can always take another one and not lose a penny.
Material about parking options for a car in the country will also be useful:
A carport made from plastic bottles will not only fulfill its immediate function, but will also add an original accent to the country landscape
So, from plastic bottles you can form a plastic structure, unusual in its configuration and performing several functions at once - it will create a protective plane from precipitation and sun and, at the same time, decorate your garden. There is nothing complicated about forming a canopy from bottles - it can easily be made with your own hands.
First, you need to make through holes in plastic containers, or rather, it is best to burn them with a hot rod, and then put the bottles on fishing line, rope or wire, connecting them in rows. Sequences of bottles are fastened together by perpendicular connections through another pair of holes and the previously selected material for “firmware”. Thus, a movable surface is obtained, reminiscent of “bottle fabric”, which remains to be attached to a metal or wooden frame using hangers of different lengths to create a wave-like effect.
It is important to know! Considering that a plastic bottle is a kind of lens that refracts light in the same way as glass, it is advisable to paint the bottom of the container to block direct sunlight.
Useful devices for the garden
solar collector
You've probably encountered the fact that your dacha doesn't have a central water supply, you didn't have time to get a boiler, and after a hard day tending to the garden you really want to take a wash instead of an ice-cold shower warm water. We invite you to try making an outdoor shower for your site with an energy-saving system - solar collector from PVC bottles. The principle of operation of such water heating is based on the so-called “thermosiphon” - more dense hot water moves up, less dense cold moves down. The developer of the system, a Brazilian engineer who received a patent for the invention, claims that 1 m 2 of solar panel will be enough to bathe 1 person.
You can assemble a solar panel from plastic bottles and forget about ice-cold water in a summer shower
Cold water entering the solar collector from the tank returns back already heated
Consumables and tools for making a collector from plastic bottles:
- 2-liter plastic bottles – 60 pcs.;
- 1-liter milk cartons – 50 pcs.;
- PVC pipe 100 mm – 70 cm;
- PVC pipe 20 mm – 11.7 m;
- PVC corner 20 mm – 4 pcs.;
- Tee 20 mm PVC – 20 pcs.;
- Plugs 20 mm PVC – 2 pcs.;
- PVC glue;
- Matte black paint;
- Brush;
- Emery;
- Scotch;
- Rubber hammer, wood jigsaw.
Plastic bottles need to cut off the bottom and insert one into the other. 100mm PVC pipes are used to form a rectangular solar panel frame, 20 mm pipes are cut into sections of 10x1 m and 20x8.5 cm and assembled into a single structure using tees. Black paint is applied to meter-long sections of pipe and milk cartons, which are placed under bottles to improve heat absorption.
Solar panels made from plastic bottles should be located at least 30 cm below storage tank with water on the south side of the wall or roof. To optimize heat absorption, the panels should be installed at an angle calculated as follows: to your geographic latitude add 10°. It is recommended to replace plastic bottles in panels with new ones every 5 years, since after some time the plastic becomes opaque, and this reduces its thermal conductivity.
Another energy-saving idea came to us from hot Brazil called “1 liter of light”. The essence of this engineering idea in terms of how to illuminate a room without windows on a sunny day is striking in its simplicity - you just need to hermetically integrate a plastic bottle into the roof - not empty, but with water. It is water, refracting the rays of the sun, that will fill the room without natural light bright light.
By filling a plastic bottle with water and sticking it into the roof of your house, you will always have a bright source of light in rooms without natural light.
Growing and watering plants
Plastic bottles will be useful in the garden not only for buildings or decoration, but also directly in growing plants, flowers and vegetables. By cutting a hole in the container and filling it with soil, you can use a plastic container to grow seedlings. Just remember to drill holes in your newly made pots for drainage and take care to drain the water.
Glue corks to a plastic bottle - you will get funny little people instead of boring pots for growing seedlings
Containers for growing plants can be given a little color by painting them with stained glass paints or decorating them with bottle caps. If your dacha is small in area, try creating vertical gardening– hang it up plastic pots from bottles on a fishing line under the wall. This way you will decorate a dull, featureless surface and save space.
To create pots for seedlings and flowers, not only plastic drink bottles are suitable, but also multi-colored containers left over from using household chemicals
Make multiple holes in a plastic bottle - this will allow you to get a device for drip irrigation
PVC bottles can also serve you well when watering your garden; if you poke miniature holes in the bottom of the bottle and attach the container to a hose, you'll have a nice drip irrigation tool. By equipping a homemade water sprayer from a bottle with wheels from an old children's car or stroller, you can move the watering machine around the garden.
Furniture for garden and home
A lot of trouble for summer residents is caused by caring for furniture in garden house and on the street - constant proximity to the ground negatively affects the appearance of sofas, beds and armchairs. Having built country furniture from plastic bottles, you will forget about what sloppy upholstery is, which is so difficult to put in order outside the city, far from service centers and dry cleaners. The containers and corks themselves are a unique material for making furniture with your own hands - durable and easy to care for.
You can collect enough from plastic bottles practical furniture for garden and home
Chairs and a garden table made of plastic corks are an economical solution for outdoor furniture
A comfortable ottoman for the cottage will be made from unnecessary plastic containers, wrapped in foam rubber and covered with upholstery fabric.
A couple of dozen plastic bottles, metal carcass– and a comfortable chair for the garden and cottage in front of you
Garden lamps
Lighting fixtures for a garden plot are another expense column that gardeners often ignore. With a plastic bottle, the lighting problem is solved in a minute. Take a colored canister of household chemicals, cut off the neck and tuck a socket with a light bulb inside - the lamp for the dacha is ready. Create a more complex lampshade configuration by deforming plastic bottles by heating, melting the edges and painting them in different colors. Original lamps made from PVC containers will perfectly replace industrial analogues, and will also decorate your home and garden.
To create original design lamps for the dacha, it is enough to paint them with stained glass paints or slightly deform them
Plastic bottles can make unusual things Street lights for dachas - the light source in them is both electric lamps and candles
Landscape decor from plastic bottles
When creating garden decorations from plastic bottles, everything is used - the entire container, the bottom and neck, the middle part and cut out fragments, and the corks are especially popular. They make very expressive decor for the garden - paths and decoration of empty areas of the house or fence. Another unforgettable decoration of the site can be installations made of PVC containers - three-dimensional and planar figures of animals and plants. Flowerbeds and borders limiting planting different types flowers, can be successfully made from the same plastic containers. And so that your ears are always delighted by the singing of birds, hang feeders and water bowls for birds on the trees, made with your own hands from PVC bottles.
Multi-colored plastic bottle caps serve as an excellent material for creating planar compositions in a country landscape.
Examples of flower beds
Without a doubt, the main decoration of a summer cottage is flowers, formed into flower beds or growing in a picturesque disorder. A special “edge” is given to the flower bed by low borders that outline its shape and give flower arrangement completeness.
In the absence of stone or brick, traditionally used to form a border, bury plastic bottles with the neck down along the border of the flower bed - you will get a simple fence for flower planting. Good decision for shady areas of the garden plot where nothing wants to grow - original flower beds from PVC containers of various shapes and colors.
Use a flower bed made from plastic bottles to create shady or wetlands in your garden.
A small flowerbed in the shape of a ladybug looks bright and unusual
Green plastic bottles are perfect for creating a border for a flower bed.
Garden paths
The issue of laying garden paths is always difficult - both the soil needs to be strengthened and decorative material buy - as a result, a considerable amount is obtained. And I don’t want to walk through the mud. While you're accumulating cash and are looking at covering paths, we offer you a temporary option for arranging them at minimal cost. Fill the paths at the dacha thin layer cement mortar and immerse plastic bottle caps in it - due to the corrugation along the side plane, they will be well fixed in the mortar.
A prosaic cement path can be transformed into a picturesque mural thanks to multi-colored plastic covers
Decorative installations
A fairly popular trend in garden landscape decoration is the creation of three-dimensional installations from various available materials, including plastic containers. However, here you need a lot of skill and patience, because you need to lay out either whole containers or parts cut out of them according to a certain pattern.
The most expressive decor for a garden landscape is voluminous installations made from plastic bottles
We suggest you make a not very complicated installation from plastic bottles in the form of a New Year tree at your dacha. Although New Year still far away, as they say, prepare your sleigh in the summer - think in advance about. Of course, the Christmas tree is the main attribute of the winter holiday, without which it is impossible to create a truly upbeat New Year’s atmosphere. What if there are no coniferous trees on your site, and you do not welcome traditional logging on the eve of the New Year? An excellent solution in its simplicity and environmental friendliness is to create a Christmas tree from plastic bottles.
The basis of such a composition is a rigid rod from which bottles can be hung or put on a wire and twisted, tiers can be created from circles, auxiliary supports can be tied or installed and a tent-shaped tree can be formed.
It is not necessary to make a Christmas tree from plastic bottles of a standard green color - it can be assembled from containers in any shade
Whole plastic bottles, bottoms, and cut container parts will be used. The bottles themselves can be deformed, melted, painted in unusual colors - in general, there is room for imagination and ingenuity to run wild. Don’t discount bottle caps either – they will make unusual garlands and miniature decor.
By the way, the Christmas tree does not have to be hidden or dismantled summer season– if you choose a cone-shaped tree, then inner space The structure will serve you well on hot days as a gazebo or become a place for children to play. You can make a miniature Christmas tree for your home from used green Sprite bottles; you just need to cut the curved planes of plastic containers into “noodles” and stick them on the base.
Bird feeders and nests
One of the types garden decor, combining many functions - feeders, nests and drinking bowls for birds. A feeder made with love will decorate the garden and attract birds - they will repay you for your kindness with cheerful chirping, at the same time destroying garden pests.
Create nests, water bowls and bird feeders from plastic bottles and paint them in natural colors
Bird nests and feeders will become useful decorations for your garden
Decor for country interior
In addition to garden decor, a plastic bottle is good for creating an extravagant interior design for a country house. Bright panels for walls and furniture, partitions and screens, even curtains - you can easily make all this yourself from PVC containers. Such home decorations look quite distinctive and original, at least you will not see anything similar from anyone else. By putting your soul into decorating a country house, you will enjoy both the creative process and the results of your imagination combined with skill.
By cutting the bottoms of transparent plastic bottles and connecting them with thin wire, you will get air screens to divide the space of a country house
Rainbow curtain for front door assembled from ordinary bottle caps, but looks very original
They will help you paint the interior of your country house in all shades of the rainbow. plastic lids from bottles
Entertainment, relaxation, games in the country
Playgrounds
Playgrounds on a plot of land are not only a pleasant thing for organizing leisure time, they are also a certain element of garden decor. Bright swings and slides, mini golf courses and fairy houses will create a pleasant atmosphere for the child to stay at the dacha.
Plastic bottles will help to separate the area for children's games, and will also serve as a base for creating interesting toys.
Set up a croquet field at your dacha and make a gate out of plastic bottles
Boats and watercraft
Surely there is a river flowing nearby your garden plot or there is a lake. If so, then your vacation on the shore of a reservoir will become more exciting if you have a means of transportation on the water. Getting to a deserted island, going on a boat trip or fishing - nothing is easier when you have a boat. You can easily build this simple transport from plastic bottles.
A narrow boat like an Indian pirogue with a capacity of 1-2 people or a larger boat for 3-4 passengers - there are a lot of options. The simplest watercraft is a rectangular raft, from which it is convenient to fish by sailing a little from the shore.
Plastic bottles will make a boat or raft that is quite stable on the water.
To make a boat in the form of a kayak, cut off the bottom of the bottles, thread one into the other one after another and form something like long tubes. Cover the joints with furniture tape - it is wide and will not come off when in contact with water. From separate tubes When connecting them together, glue the sides and bottom of the boat with the same tape to get a wedge-shaped shape. Here it is important to correctly calculate the ratio of the width of the vessel and its height - trial launches and a little engineering will help you in order to turn a mountain of unnecessary packaging into a useful thing.
A non-trivial approach to decorating a pond at the dacha - delicate daisies from bottles on the surface of the water
A boat for the whole family has a more complex design, which involves connecting vertically standing bottles in two rows and additionally sealing the hull of the boat with bags. There is nothing stopping you from installing a motor on the boat, which will significantly improve its performance and range. So, using the unsinkable properties of plastic bottles, from which, by the way, entire islands are built in Japan and Taiwan, you can surf the surrounding waters with breeze and comfort.
Haven't you bought into the idea of a plastic boom yet? Do something unusual for your garden and before you know it, you will immediately join the ranks of plastic bottle admirers.
The amount of garbage that each person “produces” is growing every year. The problem is becoming global as flying plastic bags and the plastic bottles lying everywhere have become an eyesore for everyone. I’m grieving, it turns out that you can help, and even for your own benefit. In any case, this applies to plastic bottles. You will be surprised how diverse and, importantly, useful crafts You can make one from plastic bottles in just a few minutes. Well, or a watch... Depends on the scale.
The buildings
PET (polyethylene terephthalate) is a thermoplastic from which bottles are made. It will be useful to know its physical properties:
- density - 1.38-1.4 g/cm³,
- softening temperature (t size) - 245 °C,
- melting temperature (t pl.) - 260 °C,
- glass transition temperature (t st.) - 70 °C,
- decomposition temperature - 350 °C.
Plastic bottles are very convenient to use, but are harmful to the environment, since the polyethylene from which they are made takes more than 200 years to decompose. This same property allows the use of practically waste raw materials as building material. Craftsmen already even build houses from plastic bottles, as well as sheds, dachas, greenhouses, greenhouses, and fences. Worked out various technologies- the approach is quite serious.
How to build a house from plastic bottles
The main idea is to pour into bottles bulk material, screw them on with lids and use them as bricks. Fill the bottles with sand and soil. Sand is preferable because there is too much plant debris in the soil that can rot. It must be sifted, dried, filled into bottles, compacted well, and topped up. The result is a kind of brick.
To build a house from plastic bottles, you will need a solution that fills the gaps between the “bricks”. There are options here too. This can be a regular mortar, which is used when laying brick walls, or you can make a clay mortar. To keep the “bricks” in the wall until the mortar sets, they are tied with twine on the side of the lids. Later, these “grids” will come in handy when you plaster the walls. They turn out uneven, so you can’t do without leveling.
We make a greenhouse, barn, greenhouse
You can build a greenhouse or greenhouse from plastic bottles. In this case, use only transparent plastic, since it is necessary for light to pass through in sufficient quantities. For the construction of a shed, on the contrary, it makes sense to choose darker plastic - it will be less visible what’s inside.
The first technology - one to one
The second requirement for bottles as a building material is an even shape. This one, you know, without recesses. Otherwise, folding the walls so that they retain heat will not work - it will “siphon” into the curly cutouts. Remove labels from bottles and dry. You also need to prepare pins or rods - bottles are strung on them. Their diameter is small so that the neck passes freely. Now you can start building a greenhouse/shed from plastic bottles.
To build a greenhouse or shed, pillars are dug in the corners. Frames are assembled from timber according to the size of the walls. These frames will be the base for the bottle walls. We collect them (frames) on the ground and in finished form We attach it to the dug-in pillars. When you make the frames, don't forget the doorway and windows.
We build a frame, cut off the bottom of the bottles, and string them onto a pin. From such “columns” we assemble walls, roof
The construction process begins with cutting the bottom. We string the cut bottles onto pins, pointing the necks in one direction. We insert the bottles with force so that they become very tight. Having collected a number required height, attach it to the frame. You can fasten it with clamps, strips cut from metal, nails... In any way available to you. We press the second row against the first so that there is a slight deformation. We fasten it in this position. So, row by row, we assemble all the walls, then the roof.
Using the same technology you can make a gazebo. But here there is no need for tightness, so you can collect shaped and colored containers. This will make it even more interesting (example in the photo).
Second technology - sewing plastic
Bottles will also need to be smooth, transparent or yellow. The central part is cut out of them, resulting in a square-shaped piece of plastic. The pieces are sewn together into long strips. In the strip, the pieces are placed so that they curl in one direction. Then the strips are sewn into canvases. To make the canvas even, the strips are positioned so that they curl in different sides. As a result, they equalize each other. The finished canvases are nailed to the frame. At this point the construction of their greenhouse plastic bottles over.
This type of “cladding” for greenhouses withstands winters well; it does not need to be removed. Due to the firmware (many small holes), there is no absolute tightness, which allows you to regulate humidity. You won’t be able to heat such a greenhouse, but it will delay autumn for you and speed up the arrival of spring.
You can sew plastic for a greenhouse by hand, but it is not easy. It will be easier for those who have non-capricious sewing machines. Old Podolsk machines cope with this task. There may be problems with others.
Fence and enclosure
You can make a fence from plastic bottles different ways. If you need a serious monolithic fence, you can use bottles as bricks. The technology is the same as when building a house. To avoid plaster (after all, there is a high risk that it will collapse) - select the color of the plastic to obtain the required Rusinka. But in this case you will have to look for “building materials” of the same diameter or from different sizes lay out patterns. In general, the process is creative, no matter how you look at it.
You can also make filling for the fence from plastic bottles. Make a frame, say, from wood, and come up with a beautiful filling from shaped containers and their parts.
Furniture from scrap materials: recycling plastic bottles
Not only can you make a house and a fence from plastic bottles, they are also used as a basis for upholstered furniture. The idea is to use plastic containers rather than wood for the frame. With the lids screwed tightly on, they have a high bearing capacity, and assembled into blocks, they are quite capable of withstanding loads of up to 100 kg or more.
A bed made of plastic bottles... needed good mattress, and the base is not too difficult to make
Although the furniture is made differently, the general algorithm of actions is the same:
- Select “building material” that is the same height and tighten the lids well.
- Assemble blocks of the required size, securing them with tape.
- Having assembled the base of the required shape, sew the cover. For softness adding furniture foam rubber.
The trick is to ensure that the bottles fit very tightly against each other and do not move. The slightest play can lead to destruction of the structure. Therefore, assemble the blocks slowly, carefully securing them. You can stack bottles in layers, securing each layer in several places. For inner layers better to apply double sided tape- fixation will be more reliable.
Ottomans/banquettes
The easiest way is to make an ottoman or banquette from plastic bottles. We proceed in the order described above. You need to find bottles of the same height. It’s better if they are the same shape - it’s easier to assemble. From plastic containers With the lids tightly screwed on, we assemble the base in the form of a cylinder. It is advisable that the radius of the base be greater than the height of the bottles - this way the bench will not tip over.
Next, you need to cut out two circles from fiberboard, which will be slightly larger than the resulting radius of the base - this is the “bottom” and the base of the seat. We secure them with tape. We take furniture foam rubber and, according to the obtained dimensions, cut out the necessary parts. We sew a cover from furniture fabric, colors that suit the interior.
Such a banquette can be not only round. It is quite possible to make it square. And so that this furniture is not too light, it can be made heavier by pouring water. But water is not very reliable. It's better to pour sand. Both heavier and more reliable.
Sofas, chairs, armchairs
If you need furniture higher than one bottle, proceed as when creating walls for a house. Find “material” of the same shape and height. Leave the first bottle intact, screw the cap tightly (you can add sand to prevent it from turning over). The bottom of the other is cut off and one is placed on top of the other. The bottle goes a certain distance and does not move further, no matter how much effort you make. If the resulting height is enough, great; if not, put on the next one. This is how you assemble rows of the required height, then fasten them into blocks.
There is another way. It is more reliable in the sense that the bottles are held not by compressed air, but by a mechanical stop. And they have double walls, which is also important. Disadvantage: more work large quantity raw materials are needed. The whole process is illustrated step by step.
- Take the bottle and cut it approximately in the middle of the height (the upper part with the neck is smaller).
- We insert the upper part of the neck (the lid is screwed on) until it stops into the lower part.
- We take a whole one, the same size and shape, and insert it bottom down into the prepared structure.
- We cut the third approximately in half and put the lower part on the top (with a lid).
From such modules we assemble blocks of the required configuration, fastening them with tape. Don't skimp on scotch tape. You can first fasten two bottles together, then assemble larger blocks from the double ones.
As you understand, with this technology there are a lot of bottle tops left (half of the third bottle). They can be used to make other crafts from plastic bottles: flowers, more practical things for the household.
Flower making methods
The most common crafts made from plastic bottles are garden figurines and flowers. Read about garden figurines There are others interesting ideas, but there are a lot of collected interesting animals and insects. And we’ll tell you about flowers made from plastic bottles below - these are probably the crafts made from plastic bottles that bring the most pleasure. The process is simple, there are a lot of possibilities, the result is amazing.
You've probably noticed that the bottom of a PET bottle looks like a flower. All you need to do is find a bottle of a beautiful color and cut off the bottom. Now you have a nice flower. In the middle you can add petals cut from the central part, a core from plastic strips cut into noodles, or glue beads inside, but more on that in a little more detail.
Using the power of fire
To work, you will need a marker, a lighter or a candle (it’s more convenient with a candle). If available, take pliers, tweezers or pliers to hold the workpiece while processing. You will also need acrylic paints, glue and beads may be needed. The entire manufacturing process comes down to a few steps:
There are a lot of options here. Just start doing it. It may not work out perfectly right away, but you will understand what and how you can fix it. Check out some more pictures from step by step photos process of making flowers from plastic bottles.
The simplest
For beginner crafters, you can try making flowers from plastic bottles simple shapes for garden decoration. In this case, you can also use milk containers. To avoid painting plastic, look for colored ones. And it doesn’t matter so much whether they are transparent or not. They can be combined to produce flowers of different shapes.
To create such flowers, use the part near the neck. It is cut to form petals. Next - warm it up a little, giving the desired bend to the petals, a little paint, the core from a melted piece with a thread (a bottle of a smaller diameter, a pharmacy bottle will do). So it turned out to be a buttercup.
Another option is to cut from the neck into strips of equal width - 1-1.5 cm, bend them (warm up a little at the base). Make a middle whisk from the side of a milk bottle or paint clear plastic with acrylic paint.
The middle is any bright. Here is a piece of cork, but you can cut it into thin noodles, roll it up and then heat it. You will get a shaggy core.
It's all about the form... Despite the imperfections, they decorate the site
The topic is actually inexhaustible. A variety of flowers are made from plastic bottles. From simple and uncomplicated to very realistic. It's not so much a matter of skill as different tastes and desires.
Useful ideas for the home
PET containers turned out to be so good material that they make a lot of useful things. In this section we have collected useful crafts made from plastic bottles that can be used around the house.
For the kitchen and more
If you cut off the bottom of a bottle with a capacity of 2–3 liters, you get a bowl or a bowl, and so that its edges are even, they can be melted on a heated iron. But so that you don’t have to clean the sole later, use a special silicone pad. If you don't have one, you can do this through a sheet of baking parchment.
Container for food. The plastic is food grade...
From the same bottle we cut off the threaded part. There should be 1-2 cm of plastic left around the thread (we melt the edges using a well-known technology). Now it won’t be difficult to seal any package hermetically: we pass it through the cut neck, wrap it outward, and screw on the lid.
The bottom of the bottles attached to the bar makes an excellent newspaper shelf (photo on the right). You can also store umbrellas.
You can weave containers of different shapes from plastic cut into strips. Bottles need an even shape, with thick walls. They are cut into strips of a certain thickness. You need to cut in a spiral - the result is quite long strips. If their length is not enough, they are sewn perfectly.
Lampshades
You can even make a lampshade, but under one condition: you will use similar crafts from plastic bottles in lamps - only they hardly heat up. Plastic is incompatible with other lamps. We will describe three ways to make a lampshade from a plastic bottle.
First. You need a large capacity bottle. We draw it into strips of equal width. At the beginning and at the end of each strip, we make holes with a heated soldering iron or a nail heated on fire. We insert scissors into this hole and cut. The result is smooth stripes.
When the strips are cut, we also make a hole in the bottom, pass a thick fishing line through the neck, bring it out through the hole in the bottom, with reverse side we attach the decor. Maybe a button, maybe a pebble suitable color. Now, by pulling the fishing line, we get an interesting shaped lampshade. You can put a low power light bulb in it.
Another lampshade was made using a similar technology. But then they cut part of the bottle with the neck into strips, wrapped the strips and secured them to the neck. To give the desired shape The bend area can be slightly warmed over the flame of a candle or lighter. We attach the resulting “flowers” to the base. So we get an unusual design.
They also make lampshades from the bottoms. You need to find a sufficient number of identical bottles, cut off the bottom of them, and glue them together using universal glue (choose transparent). The main thing is that it glues the plastic and hardens quickly.
Flower vases
Making a vase from a plastic bottle - what could be easier... Just cut off the neck and you're done. But there is a technique that allows you to get patterned walls. You will need a soldering iron with the thinnest tip possible. Its power should not be too high. Then everything is simple: use a heated tip to burn out the patterns.
Magically! To make the drawing appear brighter, take acrylic paint and paint the resulting beauty. The paint can be in a regular can, but it’s faster and more convenient to work with a spray can.
These are the options...
Photo ideas
Crafts from plastic bottles is such a broad topic that it is impossible to talk about everything. What’s nice is that if you know a few tricks, you can easily find out how and what to do just by looking at photographs. So here we have collected a few ideas that we found interesting.
You can even make a boat...
And this is just decoration...
