We repurpose old things for the dacha. Ideas for decorating a summer cottage: learning to make good use of waste and old trash What can be made from an old trough

Unconventional uses of ordinary things - great idea decoration of the garden, dacha. Unnecessary, lost value, appearance objects can get a second life, turning into an attractive element of garden decoration. Flowers are a wonderful decoration in themselves, and flower arrangements placed in beautiful, original flower beds will become the highlight of the garden.

The article presents some ideas on how to interestingly make flower beds and flower beds with your own hands, what available materials to use, how to arrange front gardens beautifully, practically, and inexpensively.

Interesting ideas for flower beds in the country

There are many ideas for decorating a dacha. Folk craftsmen sometimes create amazing jewelry from old, unnecessary items and scrap materials. We can say that there are as many decorative flower beds as there are summer residents.

Thanks to the creativity of decorators (mostly amateurs), many old things find their “second life” in the country. Therefore, you should not throw away unnecessary old tires, boxes, leaky galvanized buckets - many things can still become useful!

Standard pots are becoming a thing of the past. True creativity knows no boundaries except imagination. To create a flowerbed with your own hands, use a variety of materials:

tires, old tires;
hollow trunks of old felled trees;
cans;
old barrels;
gutters;
cars;
plastic bottles;
bricks, stones left over from dismantling old buildings;
boxes.

Tire flower bed

Tires are often used to create colorful flower beds. This idea is suitable for beginners to make interesting products from old tires, but it will require force and skill. There are 2 tire layout options:

On the ground. If the tire is placed on the ground, it is enough to fill the center of the tire with earth and plant flowers. The outer side of the tire is painted with any paint, matching the color to environment, design of neighboring buildings, garden furniture. With tires you can organize flower beds in various compositions, giving free rein to your imagination.
Hanging. A hanging tire is placed on the wall of a house, a tree, and earth is poured into the bottom. Flowers that grow freely hanging down should be planted in a hanging tire. The paint is chosen arbitrarily, sometimes the surface is not painted at all.

How to make from tires flower beds photo, video

Decorative birds, animals, other tire products

Tires in the garden can turn into beautiful swans. To make original flower beds you will need:

a little imagination, desire;
old tire,
dye;
fertilized soil;
seeds, flower seedlings.

Such tires will decorate your summer cottage in an original way and serve as the basis for creating small flower beds.

Video - how to make original flower beds from tires with your own hands

Beautiful flower garden made from bottles

A bottle fence will beautifully limit a flower bed. You will have to collect a sufficient number of bottles. The bottles need to be turned upside down and placed tightly next to each other, burying the neck down into the ground, defining the boundaries of the flower beds. Old bottles will help create a unique mini-fence.

Stone fencing

Various large stones lying around on the site, found in nature, are often used as a fence. The stones need to be beautifully installed, possibly secured with mortar. The stones will help you create a beautiful fence for your flower garden that has a natural look. Similarly, to create flower beds different shapes, can be used old brick, tiles left over from old dismantled buildings.

Flower garden in a bucket, old watering can

Shoes can become original pots, which can be painted and placed in the garden, planting flowers in them. Other unnecessary household items can act as flowerbeds, which, despite their unsuitability, receive a second life:

old boxes,
wash basin,
bath,
bike.

A flower garden organized in an old bucket looks harmonious on a summer cottage. The bucket needs to be given a new life by painting it. The finished bucket needs to be buried in the ground, good drainage should be made at the bottom, or the bottom should be removed completely.

Old furniture

A good auxiliary material for creating an original flower garden is old furniture, for example, an old chair. Old furniture need to be cleaned of paint and refreshed by painting with any paint you wish. A pot of flowers is inserted into the leaky seat. The original decoration can be easily rearranged to any place, depending on:

degree of illumination,
weather conditions,
reorganization garden plot,
desires of the summer resident.

You can use not only old unnecessary chairs, but also a chair made with your own hands from branches cut from old trees in the garden.

Flower beds in old drawers, cabinets, plumbing fixtures

Cabinets like flowerbeds, a bathtub filled with flowers - original ideas that bring a lot of ingenuity to the garden, color variety. Various decorative items will help complement the design:

small stones collected from the site;
decorative figures;
umbrellas;
cute trinkets that have nowhere to store and would be a shame to throw away.

Garden decorations from old shoes, baskets, broken pots

Using shoes to decorate a dacha is quite unusual way diversify the terrace, fence, garden. An old leather shoe will serve as a container for planting flowers, ornamental plants.

Unusual flower beds from old shoes, photo

You can use an old wicker basket for a flower bed. Decorative decoration fits perfectly into a country-style garden, giving a positive, warm character to the cottage. It is easy to move a wicker flowerbed to another place, hiding it from rain, hail, strong wind, and hiding young flower seedlings from the rays of the scorching sun.

A simple flower garden from an old basket, photo

Old broken, cracked vases and ceramic flower pots are useful in the garden, from which you can create fancy compositions with flowers, climbing and creeping plants.

Beautiful flower beds from scrap materials, photo

Interesting gabion flower beds can be created using wire mesh and pebbles, creating fancy shapes, filled with soil.

In the trunks of old trees

Old tree trunks are great for landscape design, will serve as a wonderful decorative flower garden.

Original flower beds in old tree trunks, photo ideas

Logs from thick tree trunks and branches harmonize perfectly with the landscape of the dacha and create a warm, homely atmosphere. Fallen trunks, stumps, and piles of cut branches can be used to create beautiful flower beds. Using an electric saw, a tree trunk can be easily cleared of branches before it dries and cut into thick pieces.

Wooden blanks can be used in different ways, depending on the size, diameter of the block or stump:

Stumps with a diameter of 35 centimeters are used as stools and tables.
Rotten stumps are the basis for stylish flower beds.
Stumps, branches with a diameter of 8-20 cm, especially deciduous trees (oak, beech, hornbeam, elm, black acacia, ash, maple, walnut, pear) should be cut into pieces 10 cm long, then use them to create a wooden path in the garden from scrap materials.
Thin pieces wood with a diameter of 3-8 cm from twigs, branches - an ideal material for fences; you can use them to make the borders of garden paths, the palisade of a stylish flower bed.
The remains of the branches should be cut into small pieces, used as mulch, compost, and covered with them on the surface of the flower bed, garden paths, following the example of decorative colored bark.

If the trunk has an attractive shape, you can use it as a sculpture. Before this, the trunk should be thoroughly cleaned and treated with a wood preparation, preferably linseed oil, resin. The inside is filled with earth, plants are planted - then it becomes an original flower pot. You can place containers with flowers inside the stump, then it will turn into a flower bed.

From pallets

Original flower beds can be made from popular pallets. Euro pallets are sold in every city and town and are used in warehouses for delivery and transportation of goods. We sell new and used pallets. This material often used to create furniture and decorative accessories. Old pallets will have to be cleaned and painted.

You can attach flower pots to the pallets. Having made a small reconstruction, attaching the bottom, you can pour soil into the resulting containers and plant flowers - petunia, geranium.

Flower beds made from pallets, photo

Conclusion

Thus, from old things, broken pots, and other improvised materials, you can organize unique flower arrangements that make the area beautiful, cozy, and conducive to a pleasant rest. Making beautiful flower beds, at the same time we will give a second life to many old things, save a lot of money, and get a lot of pleasure from creativity.

What can you make from an old basin and a couple of rusty buckets? Of course, a flower garden, and not just any flower bed, but such a work of art. The trick of the design is that the buckets seem to hang in the air. An interesting solution, so that surprised looks from passers-by are guaranteed.

It is better to take buckets with a holey bottom. Firstly, excellent drainage, secondly, it is easier to work with such material, you don’t have to drill anything, poke it with a screwdriver and the hole is ready, and thirdly, “naturalness” is in fashion now, so if this flower garden made from old buckets claims to be art, then rust is just that.

So, you need to prepare several buckets and a basin.

You need to choose a place in advance; this design is not transportable.
Then you need to calculate the locations for the holes in each container through which the steel pipe will pass
Drive the pipe into the ground and cement it.
Place the lower container and fill with soil.
Compact it tightly, as it will serve as the foundation.
We place buckets on the pipe at an angle, filling them with soil as we go.

That's all, all that remains is to select the varieties of flowers so that they are ironed picturesquely, hanging a little from the buckets. It’s better to choose different ones for each container, it’s more beautiful and practical; in the upper part it’s better to plant those that don’t require watering, otherwise you’ll have to walk with a stepladder.

If you have old things that are lying around without any use, do not rush to part with them. They can be used to create DIY crafts that will decorate the interior of your summer cottage.

An old suitcase will make a wonderful table that can be placed near your bed or sofa. You can also make an unusual chair from this item. To do this, you need to use two open halves of the suitcase. For the ottoman you will only need one part of the item.

We attach a seat frame to the surface of the suitcase, add foam filling and decorate it with fabric upholstery. We make legs, and unusual item interior ready for use.

An unwanted suitcase can become a pet's favorite place in the form of a crib. Place the mattress in it; the cover should be removable.

From an old suitcase you can make small cabinets for the kitchen or bathroom, as well as make shelves for dishes or books and a lot of other country furniture with your own hands.

In order for a pond to appear on your site, it will be useful for this old bath or pelvis. Prepare the chain-link, pebbles, cement, wire and crushed stone.

Dig a small hole; it should be 40 cm deeper than the edge of the bathtub. Process the edges of the hole. Close the bathtub drain and place it in the hole.

Lay reinforced chain-link over the entire surface near the bathtub. Apply it to her cement mortar. Decorate the cement with pebbles, tiles or gravel. Pour water into the bath, your pond is ready.

Old cutlery is suitable for decoration and transformation country interior. Forks and spoons will serve as hooks for bags and clothes.

Fork hangers for the cottage

Bend the items and attach them to wooden surface or against the wall.

forks and spoons as furniture handles

cutlery candlesticks

Chandelier decor with forks and spoons

Flower beds made from old shoes

DIY flower beds made from old shoes

Don't rush to throw away your old shoes. Boots and boots will play the role of a flower bed. Hang these items on the fence, place them on the veranda and steps, and plant plants in them.

A failed chair will turn out to be an original flowerbed, which can be moved from place to place.

Ordinary things and objects are associated with memories; it seems that they can still serve for the benefit of the family. It is useful to get acquainted with the ideas of other people and make something practical with your own hands from unnecessary things.

By decorating the fence, you can zone individual areas. For example, do children's Corner or highlight a relaxation area.

To turn wooden fence into an art object sparkling in the sun with multi-colored lights, you will need a little free time and set of materials:

Glass multi-colored stones or large beads.
Drill and drill bits with a diameter corresponding to the size of the stones.
Glue gun.
Soft cloth.

Stages of work:

Use a drill to make holes in the wood according to the number of colored stones available.
Apply glue along the edge of the stone or bead and carefully insert it into the prepared holes. If necessary, remove excess glue with a cloth and polish the stones.

Another fence design option allows you to use old caps on wheels from car wheels.

The caps come in a variety of shapes and allow you to create an interesting flower arrangement.

To design a fence this way, in addition to caps, you will need paint of several colors and imagination.

The performer will not need any special drawing skills.

Color range you can choose according to your taste: some like calm tones, while others like bright and rich ones.

You can create with your own hands from unnecessary things vertical flower beds that will decorate any fence. The main thing is that it is strong enough to withstand such decoration.

Old ones are suitable as frames for flower beds. window frames, shallow wooden boxes from under vegetables or fruits, or you can put together a rectangle from unnecessary boards. To prevent plants and soil from falling out of the container, the surface of the flowerbed must be strengthened reinforced mesh.

Tire flower beds

The properties of automobile rubber that do not rot or deteriorate from exposure to the sun, snow and water can be used to implement useful creative ideas.

Options for flower beds made from tires:

A simple and therefore popular use for the tire is in a flower bed.

You can create a lot with your own hands from unnecessary things. For example, old tires make wonderful flower beds

To make a flowerbed, you need to thoroughly wash the rubber with a brush. It is recommended to paint a clean and dried tire with bright paint. For planting ampelous or climbing plants the tire can be hung from a tree using a chain or strong rope.

If you have several tires, it is better to make a large flower bed.

A difficulty that may arise when working with tires if they need to be cut to implement the idea. To cut rubber you must have a shoemaker or hunting knife and a jigsaw. In rare cases, a tire can only be cut with a hammer drill (this depends on the structure and properties of the rubber).

Next, you need to insert the knife into the rubber and cut it, making short jerks, as if trying to tear the surface. If the knife is not perfectly sharpened, but has a relief blade, then this is even better. You can go through one place several times.

Where it was possible to cut through the rubber, it is necessary to bend the end to the side in order to increase visibility and simplify the cutting process. It is advisable to do this together. If the integrity of the tire is compromised, it will begin to lose rigidity. If this happens, then cutting should continue with a jigsaw.

Flowerbed on legs.

To make a flower bed you will need:

Car tire.
A round wooden board with a diameter corresponding to the diameter of the tire minus 4 cm.
Wooden stable legs – 3 pcs.
Self-tapping screws.
Screwdriver.
Twine or rope. The thicker the twine, the more interesting the appearance of the product will be.
Glue gun.

Stages of work:

The round board must be screwed to the tire using a screwdriver and 6-8 self-tapping screws.
The legs are secured with self-tapping screws, and you should focus on the center of the board.
Decor outside Covering the tires with twine starts from the edge of the round board - the base and then goes in a circle in the direction from bottom to top.

Glue should be applied to the rope at the point where it is attached to the rubber, and also after completing the circle, on side part strings, where the ropes should touch each other.

If everything is done correctly, then wooden base and the entire rubber surface will be hidden under the twine. Next, you need to secure the end of the rope inside the tire with glue. The flowerbed can be used.

Worn shoes for mini flower beds

You can make it with your own hands from unnecessary things country ideas, striking with a riot of imagination, for example, flower beds made from old shoes. Moss and various succulents will be an excellent decoration for old shoes.. These are the most suitable plants for such flower beds.

The older the worn boots look, the more impressive they will look framed with moss.

Any shoes are suitable for country flower beds. It is convenient to use rubber because it does not allow water to pass through, and you can make hanging flower pots.

Flower garden made from old dishes

The main rule of the garden is: for a container of any size there is a plant for planting. You can plant succulents in shallow or holey dishes.

The pots are suitable for making hanging flowerpots. Even if you simply place kitchen utensils with flowers planted in them in the garden, the appearance of the garden area will change.

Old cups and saucers can be collected on one rack.

A variety of shapes and colors of dishes along with fresh flowers will create an interesting solution for decorating the space.

Containers for growing seedlings

You can make containers for seedlings with your own hands from unnecessary things.

Suitable for this:

TetraPak packaging for milk, kefir or juice.

The liter bag needs to be cut crosswise into 2 halves. This “pot” is suitable for large seedlings. If you cut the bag lengthwise, you will get a tray for small seedlings. These containers, in addition to paper, are made of foil and polyethylene, so they are strong and do not get wet from watering.

Plastic bottles. They can also be cut lengthwise or crosswise.

Egg trays. This option is suitable for low seedlings. Both cardboard and plastic trays will work. To prevent water from stagnating, it is necessary to make holes for each recess with an awl.

Toilet paper rolls.

To use the sleeve as a container, one end must be folded and sealed so that it serves as the bottom. This container is suitable for small seedlings.

Garden figures made from plastic bottles

Garden figures made from plastic bottles, will decorate and make any garden plot original:

Palm.

To make a palm tree you will need:

Brown bottles of the same size 2 or 1.5 l.
Green bottles. You can use containers various diameters and shades of green.
Iron fittings for the trunk. If the palm tree is planned to be small, then you can use plastic pipe.
A piece of wire for leaves.
Scissors and a knife for cutting papers.
Scotch.

Making a palm tree:

Bottles must be sorted, caps removed and labels removed. Wash if necessary.
The length of the palm leaf will depend on the number of bottles. In order for the tree to have a lush crown, it is advisable to make at least 7 leaves.
Green bottles must be cut crosswise in the middle with a knife. Further work will be carried out only on the upper part. You need to make a fringe on it with scissors. The width of each part of the fringe is from 0.5 to 1 cm.

Next, you should assemble the sheet; for this, the bottles are strung on a soft wire (wire) one after another. The cap must be placed on the first and last bottle of the sheet so that the wire can be secured. You should leave a long tail of the cable where the sheet is attached to the trunk. You will need it when assembling the crown.

Using strong tape and using the tails from the wire, you need to collect the leaves into a crown and secure them to the fittings.
Brown bottles are used for the trunk. They need to cut off the bottom. Then each workpiece is cut lengthwise into 6 parts. 1/3 of the bottle at the neck should remain untouched.

To form the trunk of a palm tree, bottles are strung on reinforcement in the same way as leaves were made. You need to move from bottom to top towards the crown.

The finished palm tree should be installed. Despite the apparent lightness of plastic bottles, even a small palm tree is a fairly heavy structure. This must be taken into account when preparing the base. Iron fittings it is necessary to deepen it into the ground at a distance of 1 m or more if the palm tree is tall.

Except plastic palm trees, on personal plots You can “plant” flowers of any shape and color.

Tire trash can

Such a thing as a tire is a universal material for street creativity. If you have 2-3 tires, you can quickly make a garbage tank.

To do this, you need to put the tires on top of each other and fasten them together with self-tapping screws. 2 wheels are fastened with 4 self-tapping screws 5 cm long. To give the tank a shine, it should be painted in bright color. The tank is ready. Finally, you need to insert a 200 liter garbage bag into it and you can use it.

Ball crafts

From the usual basketball you can make a flowerpot. To do this, you need to cut the ball in half and use an awl to make 4 holes in which to fasten a cord or chain on which the flowerpot will hang.

The same idea, but in a different interpretation - a flower pot.

Meet and non-standard solutions: You can make a bag out of an unnecessary ball.

Old balls different sizes allow you to create plot compositions in the garden. Such creativity will captivate both adults and children.

To make a frog figure from a ball, you will need:

Old ball.
Paint in several colors.
Brush.
Foam spheres.
Solvent.
Glue.
Stand (you can use an unnecessary saucer).

Stages of work:

The surface of the ball should be degreased with a solvent.
Next, the ball is covered with paint, according to the chosen plot. If you don’t have art education in your arsenal, then you can download a picture on the Internet and transfer it to the ball.

To make the frog last longer, paint must be applied thin layer. Otherwise, it will soon begin to crack.

Eyes should be drawn on the foam spheres, having previously degreased their surface.
After the paint has dried, the foam eyes are glued to the ball using any superglue.
The frog stand can also be painted.

Gate made from old gardening tools

A resourceful gardener never has a question about what to do with the old rusty ones. gardening Tools. He will make a gate out of them, for example.

To get an original gate, you need to collect unnecessary equipment. Next, you should place it evenly over the surface of the gate, having first removed it from its hinges. This must be done in such a way that each tool can be fixed in 2 places.

To fix the metal parts you will need a welding machine. The wooden parts are secured with self-tapping screws. The finished gate can be painted if necessary. It's better to use for this spray paint.

Garden fountain from an unnecessary inflatable pool

Making a fountain with your own hands is easier than it seems.

At the same time, almost any container can be used as a water reservoir: an old basin, a bathtub, a tire from a large car.

An interesting solution is to make a fountain from old children's inflatable pools.

The fountain pump will need to be submerged to the bottom of the pool. To ensure the pump is stable, use pools without an inflatable bottom.

The water will circulate in the fountain: with the help of a pump it comes out in fountain jets, then the drops fall back into the pool and back into the pump.

Using an old skateboard

An old skateboard will make an original hanger. Of course, it needs to be updated, painted and hooks that will match it in the same style. There is no shame in hanging such a piece of furniture even in a city apartment.

Another option is to use a skateboard as a seat at a small bench.

A skateboard plus a little creativity and a stylish magazine stand is ready.

And at the dacha you can make a swing from a skateboard for future generations.

Using unnecessary things with your own hands, you can realize ideas, giving things a second life.

An old stool will make a small shelf for bath accessories. It is especially beautiful if the stool is antique. It may be necessary to carry out a small restoration: sand and prime the chips, renew the paint. But the result will delight the eye for a long time and surprise guests.

Or an unnecessary stool can be turned into bedside table. To do this, it should be painted and decorated so that it fits into general form rooms.

After renovation, the apartment always remains ceramic tile or tiles in small quantities. Even this a small amount of will allow you to make unique things or give new image old items.

Any mosaic is suitable broken tiles and others small parts(beads, stones). In order for the tile to stick well, the surface of the object should be prepared: first degrease, for example, with white spirit, then apply primer, and then glue the tile using any tile adhesive. The space between the mosaic pieces should be filled with tile grout.

Sometimes one of the shades of a chandelier breaks, and it becomes unnecessary. You shouldn't rush to throw it away. You can create many amazing things with your own hands from unnecessary things. The remaining intact lampshades will be used to make flower pots.

If imagination allows, they can be further decorated or left untouched.

The chandelier frame can also be used. It can be converted into an unusual flowerpot.

For hanging planter you will need:

Frame from an old chandelier.
Flower pots.
Aerosol paint.
Degreaser.

Stages of work:

Old chandelier must be cleaned from dust and dirt.
The entire frame should be degreased for better adhesion of the paint to the surface.
Next, the chandelier needs to be painted. It is better to use spray paint. It fits more easily on objects with many small or shaped details.

IN single color with a chandelier, flower pots should be painted.
At the final stage, pots with flowers are placed on the base under the lampshades and the flowerpot is carefully hung on a hook prepared in advance. The resulting pots and flower pots weighs several kilograms, this must be taken into account when choosing a place for it.

Creative hangers

Hangers are an indispensable piece of furniture for any apartment, house, or barn. A budget option You can make hangers if you use items that are on hand in every home.

You can make a hanger for gardening gloves with your own hands from unnecessary things, having a wooden board and a few clothespins.

A clothes hanger will work if you look at the regular hangers that hang in every closet from a different angle.

Wooden skis gathering dust in the garage, the right approach They will last for many years if you make a floor hanger out of them. She takes small area and will become a useful piece of furniture.

Key holder

How often do you discover that your keys are missing at the last minute before leaving home? It’s better not to make meaningless promises, always put your keys in one place, but take 10 minutes of time and make a key holder.

For the holder you will need a tennis ball and a utility knife.

It is necessary to make a horizontal cut in the ball, 6 cm long. It should be cut just below the middle of the ball, where the mouth will be located at the future muzzle. The eyes are drawn or you can glue ready-made ones.

This holder is suitable not only for keys, but also for papers, towels, and various office supplies. Depending on the tasks, the ball can be glued to the wall with superglue or attached with a screw.

With my own hands from unnecessary details It is possible to create a different version of the key holder from Lego. The convenience is that the designer will perform two roles at once - a holder and a key fob.

Rack for garden supplies made from old rakes

The shape of the rake itself suggests that they can be used as hooks.

In a gazebo, under a canopy, in a barn or garage, such a hanger will look quite harmonious. And you no longer have to look for gardening tools, which every gardener has in abundance.

Watches made from unnecessary things

You can make a watch with your own hands from unnecessary things. This will allow you to do for each room original items interior and at the same time save money.

The main thing you need to have is the mechanism and the hands. They can be taken from old, obsolete watches or bought at a specialized store.

Interesting idea- use domino chips for the clock, since they already have “numbers” of dots printed on them.

To make such a watch you will need:

12 dominoes corresponding to the numbers 1 to 12.
Wooden boards.
Finished frame.
Paint with a brush.
Glue.
Clock mechanism with hands.
Drill, nails.

Stages of work:

The boards must be cut to fit the frame and fastened together. A hole is made in the center with a drill for attaching the arrows.
Next, you should paint the frame with the boards the same color.
Dominoes are glued evenly around the circumference.
Then the clock mechanism and hands are attached to the workpiece.

You can also use other things to make a watch, for example, a saucepan lid, a cookie tin. In every home there are enough old things that can be given a second life.

Transforming a suitcase into a cozy chair

If there is an unnecessary one in the house old suitcase, then having the skills to work with a screwdriver and a hammer, you can create an exclusive chair. Little is required of a suitcase: be wide enough so that it is comfortable to sit on and have side panels in good condition, as they will be visible in the finished product.

Also side panels must be strong to support the weight of an adult. Before you start creating a masterpiece, you need to sit on your suitcase and make sure that all the specified requirements are met.

To make a chair from a suitcase you will need:

Suitcase.
4 chair legs.
Screwdriver and screws.
Hammer and nails.
Buttons.
Glue.
Paint and brush.
Scissors.
Upholstery fabric.
Furniture stapler.
2 pieces of foam rubber, corresponding to the size of the suitcase lid and 5 cm wide.
2 boards 1.8 cm wide.
2 narrow wooden planks measuring 10 by 40 cm.
Sandpaper.

Stages of work:

It is necessary to cut out the seat of the future chair from the boards. The size of the workpiece should be slightly smaller than the size of the suitcase. That is, the board should fit neatly into the suitcase and hold on to its walls. You need to cut 2 identical blanks.
To make a seat, you should glue the foam rubber to wooden blank.
Then the base is covered with fabric. This can be done using furniture stapler.
To decorate the seat with buttons, you need to screw in self-tapping screws at their location. And then glue decorative buttons on top.

2 wooden slats are fixed inside the suitcase so that the seat can be placed on them.

The second cut board is needed to attach the chair legs. It should be lowered inside the suitcase and the legs should be attached to it. The screws should penetrate the surface of the suitcase and enter into wooden base.
For the back of the chair, the foam rubber should be upholstered with fabric and decorated with buttons. The resulting blank is glued to the inside of the suitcase lid.

Video instructions for making beautiful garden furniture from old car tires:

Old spare parts for organizing a garage

There will always be spare parts in the garage that are no longer used, but it would be a shame to throw them away. Also, every garage owner tries to organize the space so that it is convenient and functional.

Objects created with your own hands from old things that organize comfortable space, bring great joy.

It's quite easy to make a sofa out of old car seats.

Barrel from under machine oil can be transformed into a convenient bedside table for the washbasin. The metal from which the barrels are made can be easily cut to fit the shape of the sink, and the pipes can be hidden inside the barrel.

Can act as a shell car disk.

Old headlights are suitable for creating original chandelier.

The hooks of the safety ropes will make a hanger.

Hooks from unnecessary wrenches

Products from old wrenches Will fit perfectly into the interior of a garage or shed.

For example, they can be used as coat hooks or door handles.

Scotch tape box in the garage

If your garage space isn't organized correctly, finding tape can take time. To always know where to look for tape, it is recommended to make a special box with compartments where tape and tape will be stored.

An important quality of the box is to provide the ability to secure the ends of the tape so that if necessary, you can use it quickly.

Reservoir for small tools

In a garage or country house there is a problem of where and how to store small tools or parts. To put things in order, you can use jars with lids. Any jar size will fit.

There are many advantages to organizing the storage of small items in this way:

Through the transparent glass you can see what is in the jar.
Space saving. The shelf can be used simultaneously direct purpose- put things on top of it.
The problem of recycling cans is being solved.

To make a shelf for storing small items from jars with screw-on lids, you will need:

There are many cans of the same size and shape.
Ready wooden shelf.
Screws.
Screwdriver.
Pencil, ruler.

Stages of work:

Need to prepare even number cans. To do this, unscrew the caps, wash, and remove the labels.
The jars will be placed in 2 rows. Using a ruler and pencil, you should mark the lines and notches where the lids are attached (the calculation depends on the number of cans available).
The covers are secured with screws to the shelf, in accordance with the previously made markings. Place the lids on the jars. Containers for small items are ready.

Stepladder rack

From a stepladder that has lost its usual purpose, you can make a rack.

What you will need to make a rack:

Ladder.
Boards.
Self-tapping screws and screwdriver.
Metal corners.

To make a rack, you should install the boards and secure them to the stepladder using corners and self-tapping screws.

Tennis ball massage chair

There are many options for resuscitating old chairs, armchairs, and stools. The idea of creating a massage chair is interesting. Making it will require skill and dexterity, but the result is worth it. Tennis balls act as massage parts.

Necessary materials:

Old chair.
50 tennis balls.
Plywood. You will need 2 sheets corresponding to the dimensions of the back and seat of the chair.
MDF. 4 sheets, same dimensions as plywood.
Self-tapping screws.
Drill.
Jigsaw.
Hammer.
Sandpaper.
Textile.

Stages of work:

The chair must be dismantled: remove the back and seat.
On sheets of plywood, you need to draw circles 2-3 mm wider than the diameter of the ball (usually tennis balls have a diameter of 6.3 to 6.7 cm) and cut out the drawn circles with a jigsaw.

Next, you should redraw the circles from plywood onto MDF sheets. The resulting circles should be reduced. Their diameter should be 2-3 mm less than the diameter of the ball. This is done so that the ball fixed in the resulting “sandwich” (MDF-plywood-MDF) can rotate, but does not fall out.

Then you need to cut out the circles:

Round holes should be rubbed sandpaper so that the ball does not touch anything in them, but spins well.
MDF boards with outside varnished.
The seat needs to be assembled. At the bottom there is an MDF board, then plywood, you need to put balls in the holes and cover the top with an MDF board. If everything is done correctly, the balls should not fall out, but will spin well, creating a massage effect.

The boards around the perimeter should be fastened with self-tapping screws, as well as in several places in the center.

To make the back of the chair, you need to repeat step. 2-6.

Cork bath mat

A cork mat has many advantages:

Eco-friendly.
Keeps you warm.
Doesn't get wet from moisture.
The surface does not slip.

For a small rug 40 by 60 cm you need a lot of corks (at least 100). It is difficult to collect such a quantity, even if you involve all your relatives and friends in this activity. It's easier to buy them. On average, 100 pieces will cost 500 rubles.

To make a rug you will need:

Rubber base. It can be a new or already used rubber mat.

If you use an old rug, you must first wash and degrease it.

Wine corks. The quantity will depend on the size of the base, but not less than 100 pieces.
Glue gun.
Stationery knife.
Sandpaper.

Manufacturing stages:

All corks must be cut in half lengthwise. And sand each cut so that it is even.
The cork halves should first be glued along the perimeter of the base. And only then fill the internal space.

Different orientations of the corks when creating a rug will allow you to achieve different effects and patterns.

And finally, one more photo of items that can be made from unnecessary items. household of things.

Creating new ones from old things with your own hands allows people to express their creativity, solve minor issues on a budget, and perhaps find a new hobby.

Article format: Natalie Podolskaya

Video about creating various useful items from unnecessary things with your own hands

Video on how to make something with your own hands from unnecessary things useful items: