Brushing – unique technology, which allows you to age and structure the wood. This solution provides an opportunity to give new wooden products an aged, noble appearance. More and more people are choosing to create unique interior in a house or apartment using wooden finishing materials. As a rule, wood that has a more aged appearance looks very noble and luxurious. But not many people know that even new wood products can be given the luxury and nobility that wood acquires after many years of use. In this article we will look at a master class on brushing step by step.
Increasingly, when decorating the interior of a house, they use wooden crafts, beams, ceilings, doors with the appearance of aged wood.
Tools for brooching wooden products:
- Grinder or electric drill with attachments;
- Iron and abrasive brushes;
- Bulgarian;
- Wide brush for varnish and oil.
Stage 1. Rough finishing of wood
Let's take it wooden blank, in our case, a board made of soft wood. Next, using a grinder and a special wood disc, we make shallow notches, as shown in the photo below.
As a rule, this processing of wood with a grinder will already be sufficient for further use on ceilings or in places where a person cannot touch it with his hand, since in this case, during the initial processing, burrs remain on it.
Stage 2. Finishing
In the case when you plan to use wood after the broaching process for window sills, doors, furniture and other interior items, additional processing of the wood surface will be required. First of all, you need to slightly smooth and level the surface of the wooden product. For this we will use a wire brush. It is worth noting that you need to work with such a brush on the surface without special effort so as not to spoil the finished wood structure.
First of all on electric drill it is necessary to install an iron nozzle with a coarse fraction. As shown in the photo below, we carefully go through the entire processed rough surface of the wooden workpiece without excessive force.
It is worth noting that iron brushes are used to smooth the surface of a wooden product, and burrs are removed using abrasive attachments. Thanks to this, the aging of wood looks not only believable, but also safe for humans, since the surface of the wooden product will be perfectly smooth without burrs.
Stage 3. Surface treatment with abrasive brushes
After the entire surface has been passed with an iron nozzle, we proceed to finishing abrasive attachments. When working with abrasive attachments, you should press with force to thoroughly remove all burrs on the wooden workpiece.
Stage 4. Finishing
After preparing the wood for finishing, you can use glaze or treat the surface of the wooden product with drying oil, oil, stain, or varnish.
In the photo below wooden facade the house was glazed.
Oil coating allows you to get the effect of “aged” wood. To do this we need a regular brush and oil for wood in the interior. Best choice of oil dark shades, in this case, wooden products will look more noble. Carefully coat the entire surface of the product with oil.
Stage 5. Giving the effect of “aged” wood
In order for the dark recesses to remain dark and the light ones to remain light, we will need to treat the surface of the product immediately after impregnation with oil. To do this, we take an ordinary cotton rag. By carefully wiping the entire surface of the product with a rag, we create visual effect“aged” wood, as shown in the photo below.
Do-it-yourself wood brushing is an interesting technology that allows you to artificially age wood. The natural aging process takes decades. But now, with the help of special tools, this effect can be achieved at home quickly and without significant material expenditure. Aged material is ideal for decoration in classic, vintage and rustic styles.
Do-it-yourself wood brushing: how the process is carried out
Residents of modern cities increasingly prefer styles with a clearly emphasized individuality when decorating their premises: classic, vintage, rustic and country.
The main detail of such interiors is wood. Thanks to this material, the design of the room acquires uniqueness and unique charm. But for a classic and vintage style, pristine wood is not suitable natural form. IN in this case best suited is aged wood, which has a more attractive and noble appearance. This material is suitable for making any decorative element: vintage lamp, wooden chest of drawers, stylish doors And window frames, fireplace lining.
IN natural conditions The aging process of wood drags on for decades, since the original patterns on the surface of the wood are formed slowly and unevenly. Therefore, this material is rare and expensive. But among modern technologies there is a simple and quick way artificial aging of wood. This process is called brushing. Interest in this method is shown not only by lovers of luxury vintage furniture, but also by those who want to diversify interior interior country houses.
Do-it-yourself aging of wood (brushing) – decorative technology processing of wooden products, during which an artificial antique effect is created for an ordinary wooden surface. The method got its name from English word brush - brush. The aging process is also called wood structuring.
Method artificial brushing based on the difference in hardness of the layers that make up the wood. During the work process, the soft light layer is removed. As a result, the areas become embossed, which gives the material special look, characteristic only of fairly old trees.
Types of safe finishing materials for finishing premises, their specificity and features of use, prices.
Process automation: machines and machines for brushing wood
Mass production of artificially aged wood requires speed. Some stages of wood processing can be mechanized, which will simplify the work of obtaining aged wood. To do this, you will need drills with variable speed control and special brushing machines.
Let's look at the most popular models of specialized equipment for structuring wood.
Festool rustofix ras 180 stripping router or brush machine for brushing wood. Along with this tool, you can buy brushes for brushing wood. They come in three types:
- steel wire brush for primary processing of boards;
- synthetic bristle brush for intermediate sanding;
- sisal or hair brushes for polishing the back surface of the product.
The Makita 974 sander is used for brushing wood. But during work, difficulties may arise with processing areas at the corners of the part. Therefore, at joints, it is recommended to use a special angle grinder with different attachments or use one mounted on an angle grinder nylon brush for brushing. This brush is highly wear-resistant and allows you to process the ends, edges and contours of parts with complex shapes.
The Felisatti AGF 110/1010E grinding machine is suitable for processing both smooth and uneven surfaces. Nylon and metal brushes are included with the tool.
Helpful advice! It only makes sense to buy a wood brushing machine if large volumes of work are planned. Brushes for brushing wood can be purchased either with the machine or purchased separately.
How to age wood with your own hands: technologies
The aging process opens up the widest possibilities for the master to change the structure and color different breeds wood Before proceeding directly to structuring, the wood must be prepared. The material for brushing must be free of defects, nicks and irregularities, and the humidity must be 10-12%, but not more than 15%. If the wood does not meet these characteristics, then the wood fibers will tear during processing, and a beautiful result from structuring will not be obtained.
Let's take a closer look at the process of aging wood at home. Working with the material can be divided into several stages.
Before starting work, it is necessary to perform initial processing of the part, namely: moisten the wood. This will prevent dust from spreading throughout the room during operation.
Next, you will need a hand brush for processing. Depending on the hardness of the wood, we select the hardness of the metal brush for roughing. The bristles of the tool should easily remove soft surface fibers, but should not damage hard ones. It is necessary to move the brush in the direction of the fibers.
If you decide to automate the processing process using a brush for brushing wood on an angle grinder or a grinder, then you should remember that the movements are carried out along the fibers. It is necessary to move the tool with such intensity that the fibers are effectively scraped out.
You need to be careful when choosing the speed: too fast a brush speed can lead to baking of the wood. Using hand tools This problem does not arise, but more effort needs to be made. Also, manual processing will take time.
Helpful advice! It is better to select the speed on a separate small sample of wood. The optimal number of revolutions is 1500-2200, but it may differ for different breeds.
Then we carry out the initial grinding of the part. To do this, we use a polymer brush with an abrasive applied to it. This stage will remove roughness and fiber fragments from the surface of the part. Having removed everything unnecessary, you can evaluate how deep and high-quality the structuring of the wood is. If necessary, the grooves can be further deepened, making the structuring more distinct.
At the next stage, you can think about decorative design details. To do this, use a chisel to make indentations and grooves of arbitrary shape in different places on the part. In appearance, they will resemble cracks that appeared naturally.
Next comes the final polishing. To do this you will need a sisal or hair brush. This wood tool will give the detail a finished look, fully revealing all the decorative texture. At manual processing Instead of a brush, fine-grain sandpaper with an abrasive surface is used. It will allow you to create a perfectly polished surface of the workpiece.
Then the wood needs to be well dried. It must be completely cleaned of dust and thus prepared for further painting and varnishing.
Application will make the product look old by creating contrasting textured patterns. Applying liberally and quickly removing excess will allow you to paint over parts with soft fibers and leave light areas with hard fibers. Soft fibers quickly absorb paint, which means they become dyed, while hard fibers do not have time to absorb the pigment during this time, so they remain light. Wood painted with gold or silver paint looks especially beautiful.
Against the background of the natural color of the wood, this pigment creates reflections on the surface of the part in the sun. This gives the product original decorativeness and luxury. The product will look especially presentable if the wood is patinated - painting over the deepest cracks with a darker paint.
At the final stage, the product is polished again to remove roughness and irregularities that appeared after painting.
Helpful advice! Varnishing is carried out on completely dry and cleaned wood. To paint brushed parquet, you must use a special parquet varnish. This will allow the finished coating to maintain its presentable appearance and performance characteristics for a long time.
Brushing wood: features of chemical structuring of wood
Brushing with chemicals is rare, even though the use of chemically active compounds greatly facilitates the process of artificial aging of wood. To carry out chemical treatment of wood, you must have special knowledge and ability to work with chemicals. In addition, the method has a drawback - it is not always possible to easily purchase the necessary reagents.
For chemical structuring wood requires acids: hydrochloric and sulfuric, alkali and ammonia. Reagents applied to the surface of the material corrode soft fibers. The master can only scrape off the unnecessary wood.
Stages of chemical brushing of wood:
- Surface grinding and removal of dirt.
- Apply a thin layer of chemicals to the surface of the part. During chemical structuring, it is necessary to monitor the evaporation of the reagents. If necessary, it is recommended to reapply them.
- When Chemical substance will act, that is, soften the outer fibers, the part must be washed under running water and remove any remaining reagent with a soft bristle brush.
- Next, the wood must be thoroughly dried, painted or varnished.
The availability and demand for brushing allows you to perform this method at home. When structuring wood, it is imperative to adhere to safety regulations. You should work with tools and a wood brushing machine carefully and carefully. All artificial structuring processes must be performed in special protective clothing, glasses and gloves. If antiseptic solutions are used during work or too much dust accumulates in the air from the wood, then you should work in a respirator.
Brushing a wooden surface is unusual way make a wooden product more beautiful, unusual and attractive. This method is very popular among interior designers and ordinary people, since anyone can perform artificial aging of wood. It takes a little time and effort to get luxury furniture or a chic original ceiling, stylized in antique style. For a better effect, you can patina the furniture.
Artificial brushing of wood: cost of work
The main task of brushing wood is to create and emphasize the unique texture of the surface of the board. The result is a material with a clearly visible pattern. natural material. The procedure is suitable for many types of material. The cost of standard brushing is 350 rubles. per sq. m. When ordering additional painting, the cost increases. The price of the work depends on the type of wood chosen, as well as on the size of the board.
The cost of each stage of artificial aging is usually calculated separately. You can order sanding separately or just impregnation. The most profitable option is a full brushing service from the beginning of work to the final coating with the purchase of material. It is possible to perform artificial structuring from your material.
Workshops that brush wood carry out an individual calculation of the cost of processing depending on the type of wood, the size of the product and the list of services.
Brushing is performed on any type of wooden materials:
- bar;
- lining;
- planks;
- block house;
- planks.
Scope of application of wood structuring technology
The structuring method is very popular in the manufacture of interior items and room elements. Such wooden products will become an original addition to classic and vintage interiors. In addition, the advantage of brushing technology is the ability self-creation exclusive items. In addition, this method belongs to the category simple processes accessible to everyone.
Brushed boards are used to decorate fireplaces, shelves, columns, Wall panels, and also aged wood is used as ceiling beams. This material creates a unique ambiance for living rooms and halls, cafes and restaurants. The interior design is filled with aristocracy and luxury, and aged wood creates warmth and comfort in the room.
Looks stylish and sophisticated wooden furniture using brushed elements. Artificial aging and patination of wood with your own hands allows you to make absolutely any furniture: cabinets, chests of drawers, pegs, beds. The use of brushed elements in furniture and interior design has no restrictions or prohibitions - it all depends on your imagination and creativity.
5 minutes to read. Views 1.1k.
This article talks about methods for aging wooden surfaces. How to do it correctly, and some advice from professionals.
Aged wood has recently become very popular. Wood ages in natural conditions for a long time under the influence of natural phenomena. Artificial aging helps to obtain material much faster for further use.
Methods for aging wood
To artificially age wood, you need the following tools:
- Hard metal brush
- Circular brush
- Sandpaper for grouting
- Brushes
- Antiseptic for wood
- Big sponge
- Planers
- with nozzles
Methods for aging wooden boards:
- Removing soft fibers from wood and painting
- Multi-layered color of the wooden surface and antique relief
- Finished with wire brush and white glaze
- Aging using fire
- Brushing
- Patination
- Scuffs on the wood
- wood stain
- Using wax
Using the brushing method to age wood
The brushing method involves removing soft fibers from wood using a brush.
The brushing method involves the following steps:
- The wooden board must be processed with a plane to give the material signs of damage
- It is necessary to moisten the wood with a damp brush and let it dry for a few minutes.
- After which it is necessary to treat the wood with a metal brush
- wood needs to be treated sandpaper
- Then you need to paint the material with wood paint
- It is necessary to go over the bulges with sandpaper so that they become lighter than the rest of the material.
- Finally, the board must be varnished.
Patination method
Correct application of wood patination:
- Use a wire brush to remove all soft layers of wood.
- A primer must be applied to the prepared material. Using primer will help extend the life of the material.
- The primed surface should be sanded with sandpaper.
- Apply patina to wooden surface
- When the coating dries, it is necessary to remove it in several places. thin layer coating with grinder, after which it is necessary to apply a second layer of patina of a darker color with a semi-dry brush
- Finally, the part must be varnished
Depending on the type of product, you can use special composition craquelure, which causes cracks to appear in the primed coating. This helps visually age the wood.
Waxing
This method of aging wood helps give the part the required age.
To do this you need:
- Paint the wood with dark antique paint
- When the paint is dry, you need to rub the board with paraffin.
- After this, you need to cover the board with a new layer of paint several shades lighter than the base layer.
- Using a spatula, remove the layer of paraffin
- The wood needs to be sanded
- Finally, the board must be waxed
wood stain
This method is used to age furniture parts
To do this you need:
- Cover the wooden board with a layer of water-based stain
- After this, use a soft sponge to wash off the applied stain from the board. Leaving all cracks and corners covered with the product
- After wooden detail When completely dry, you need to apply another layer of stain
- After the part is completely dry, use a brush to apply shellac primer in areas of pores and cracks.
- To complete the process, wax is used, which is rubbed in with a small metal brush.
Other ways to age wood
- Aging wood with fire– used to quickly acquire an old-looking wooden surface. The selected part must be fired using gas burner, then remove the soft fibers with a wire brush. Finally, open the surface with one layer of varnish.
- Aging with a wire brush and white glaze- This method is considered the fastest. The wooden board is treated with a wire brush, after which a layer of glaze is applied. After the paint has dried, the wooden surface is brushed again with a wire brush.
- Multilayer coloring of a wooden surface– to do this, the surface must be slightly damaged by scratching, punching and sawing to obtain an ancient relief. After which the wooden surface must be primed and covered with a layer of toned dark paint. After complete drying, the wooden surface must be sanded with sandpaper. After this, it is necessary to cover the wooden surface with a thin layer of white glaze. When the paint is dry, use a wire brush to scrape off upper layer paints to give the surface an old look. Finally, you can open it with a thin layer of varnish.
- For a more beautiful effect, you need to use old boards for aging
- It must be taken into account that the result of aging will vary depending on various breeds tree
- It is advisable to use a special wax for aging furniture.
- To avoid a lot of dust when sanding wood, you need to slightly moisten the wooden surface.
- To better display the design on a wooden surface, you need to scratch the board with an awl.
- To preserve texture for a long time wooden board and the aging effect, the wax must be rubbed in using a special metal brush in a circular motion
- Before you start sanding, make sure that the painted surface is thoroughly dry.
Artificial aging of the wood surface will create a unique look for the products. The many ways to age wood make it possible for even the most inexperienced beginners to master this process.
Wood is considered one of the most popular materials and at the same time is easy to process, so it is possible to use various methods aging of a wooden surface in one product.
Despite the variety of glossy facades, interior elements made of antique wood remain in demand. Purchasing such furniture will cost a pretty penny. If you don’t want to spend too much money, you shouldn’t give up the idea of having an aged chest of drawers or a table. You can try to age the furniture yourself. Let's try to figure out what technology is used to process antique wood with our own hands. After all, natural conditions age the tree long years. And to get results quickly, you will have to age the wood artificially.
You won't find antique furniture in every home. It should be used where appropriate. The design of the room must be thought out in the appropriate style so that antique products look decent.
Typically, the procedure for aging wood is performed for a specific purpose, namely:
- Satisfy the taste of the inhabitants of the home.
- Save money on antique items. It is much cheaper to buy inexpensive furniture and age it artificially.
Using certain methods of aging wood, you can get exclusive things. Both the entire product and its individual parts are processed. Special attention should be given to items such as chests of drawers, sideboards, bookshelves, mirror frames. They are aged most often, since it is difficult to imagine a vintage-style interior without these items.
Aging methods
The process of processing antique wood with your own hands is done in several ways. The main ones are:
- Chemical treatment– used for deciduous trees.
- Firing or heat treatment- a universal option.
- Mechanical processing or brushing– this method can be used to process products made of oak or pine needles.
Furniture for aging is selected to be massive, with a rough texture, so that in appearance it resembles hand-made objects of past centuries. Before processing, it is better to disassemble the furniture into individual parts. This will make it possible to treat even hard-to-reach places.
To make it easier to achieve the effect of aging wood, it is better to purchase material that has already been damaged by the bug, with minor chips, cracks and knots.
If you are doing the process of aging wood yourself for the first time, then it is better to practice a little on separate unnecessary bars. The quality of the result depends on how well the solution, stain or varnish is applied. It is recommended to carry out work on outdoors so as not to harm your own health.
How to make new boards or furniture look like old products? Now you know that several techniques are used for these purposes. Let's take a closer look at each of them.
Related article: Features of performing work on polishing a wooden house
Mechanical restoration
Aging wood mechanically possible in products made from such species as pine, spruce, larch. It is these types of wood that have a pronounced texture, the presence of layers of fibers with varying degrees of hardness.
The main task during machining is the formation of various types of chips, potholes, and cracks artificially. This can be achieved by the following actions:
1. Wooden surfaces are processed using an ax or a special grinding machine. They are randomly marked with potholes of varying depths and widths. The block is hewn, but one should not strive for special accuracy and symmetry.
2. After this, we proceed to sanding the surface using a brush with metal bristles. It will be easier to do this with a grinder and an appropriate attachment. During processing, grinding is carried out along the grain until the caused potholes and chips take on the appearance of naturally formed defects in the wood.
3. Then we move on to the second degree of grinding. At this stage we use a brush with soft bristles and sandpaper. During this treatment, soft fibers are removed, leaving coarser ones. Thus, we get an uneven tree structure. Using the same method, you can additionally highlight knots and cracks.
4. At the next stage we work on the color of the wood. It is necessary to bring the light new wood as close as possible to the shade of the board that has darkened with age. Here you can use stain or dark acrylic-based paint.
5. When the applied product is completely dry, sand the surface with fine-grain sandpaper. At the same time, we try to perform all actions carefully. The paint should be removed from the hills and ridges, but it remains in the potholes.
6. At the final stage, cover the treated surface with colorless or light yellow varnish and dry completely.
Related article: Features of the selection and use of tung oil
On video: a method of mechanical aging of a wooden board.
Regarding the question of how to age wood on small items such as small pieces of furniture or wooden utensils, then here the process is a little simplified. The surface to be treated is thoroughly cleaned from wood dust with a brush until the desired effect is achieved. Subsequent painting and opening with varnish occurs identical to the previously described process.
Brushing should only be done by hand using a wire brush until small dents and ridges are reached.
Heat treatment
Wood can be aged by heat treatment. A feature of this aging method is the complete absence mechanical processes. The disadvantage is a certain danger to human health during work. Therefore, they should be performed fresh air, while protecting skin, eyes and respiratory organs.
Heat treatment or firing is carried out by exposing the wood to direct fire. You should use either a torch or blowtorch. It is necessary to burn to a depth of about 3 mm.
If heat treatment is carried out superficially, the aging effect will not be as pronounced as with stronger firing.
After finishing the heat treatment, perform the following steps:
- Using a metal brush or grinder with a bristle attachment, begin to scrape off the layer of soot to the desired degree of antiquity. There is no need to paint the surface. The soot will highlight the entire structure.
- Sanding is done with sandpaper.
- Apply to aged wood finishing layer clear varnish.
Chemical method
You can age wood through chemical treatment using such means as alkaline compounds or ammonia. You can use the funds household chemicals, which contain alkaline components.
The essence of the process is that when the product gets on the wood, it burns it soft fabrics. The structure of wood is distinguished by the presence of hard and soft tissues. When treating wood to look antique, soft tissues are removed different ways.
Recently, the use of aged wood in furniture and interior decoration has become fashionable. Even the simplest cheap wooden furniture will look stylish and expensive after it has been artificially aged. This article will reveal several simple and not very expensive ways to age wood with your own hands for furniture and other wooden products.
Under natural conditions, wood ages under the influence of sun, wind, rain and other phenomena. And this process occurs over a long period of time. We will make the process of aging wood artificial, which will significantly reduce the time and improve the final result. If we describe the whole work briefly, it will consist of two stages: mechanical restoration wood (light damage, removal of soft fibers) and painting with varnishes and paints.
To age wood, you will need:
- hard metal brush;
- circular brush;
- large and small skins;
- savvy;
- several brushes;
- wood antiseptic;
- White Spirit;
- dark Pinotex or dark Belinka azure;
- white Belinka azure;
- big sponge.
With a set of these tools and materials, we can age wood in five different ways. Let's take a closer look at each of them.
The first way to age wood is to remove soft fibers and paint
You can artificially age a wooden surface using a hard brush, which removes soft wood fibers and thus creates a relief, the lines of which will be emphasized by the color of the wood.
The wooden surface is first sanded, then it is processed along the grain with a circular brush (using a special attachment for an angle grinder) or a metal hand brush, as a result of which soft wood fibers are removed from the surface.
Sawdust is removed with a special brush with soft bristles, but in no case by hand to avoid splinters.
The tree instantly changes its appearance, acquires a beautiful relief and contrasting color, which is specially emphasized by painting in two layers.
For painting, use translucent Belinka glaze, which is applied to the cleaned surface using a brush or roller.
The tree will already have a rather attractive appearance.
After a few minutes, take a sponge and use it to carefully remove the layer of glaze, as a result of which the wooden surface acquires a relief. You can leave the surface as is and cover it with clear varnish if you like the color of aged wood.
But if you want to add a Provence style to the coloring, then another thin layer of Belinka white glaze is applied on top of the first layer.
After a few minutes, we carefully remove the fresh azure with a sponge, as a result of which we get a bleached aged wood, with the help of which we create stylish interior a la Provence. When the glaze is completely dry, the surface can be coated with varnish having the same base as the glaze, or another layer of colorless glaze can be applied.
This method of aging wood is ideal for beams and other elements. wooden structures, when creating an antique style.
The second method is the relief of antiquity and multi-layer painting of wood
Using this method, the wood is specially given the appearance of an old, antique thing, worn out by time. For this purpose, multi-layer painting of wood is used.
First, the surface of the wood must be specially subjected to all kinds of minor damage: it is beaten with a hammer, pierced with an awl, torn with a saw, sealed with screws or steel rods, and everything possible is done to give it the relief of antiquity.
Then the surface is primed with a layer of Pinotex. After it dries, it is covered with a continuous thick layer of tinted paint (antiseptic).
Since Pinotex has a thick consistency, it can be applied unevenly, as it is much thicker from Belinka glaze. It is used in cases where it is necessary to create a thick bottom layer on aged wood.
Belinka's glaze is more liquid; it spreads easily and evenly over the entire surface of the wood, creating an even coloring of the surface.
When the first layer has dried, it can be intentionally subjected to minor damage: rub it with fine or coarse sandpaper, or brush it with a wire brush. The main thing is not to overdo it. The amount of time spent here should be minimal. According to experts, the most reliable effect of antiquity is achieved by painting with Pinotex in an uneven layer.
After the procedure of deliberate aging by scratching with sandpaper or a metal brush, a translucent layer of white glaze is applied to the surface so that the dark lower layer is visible through it. It is not necessary to apply the paint in an even layer.
After the top layer has dried, use a metal brush to scrape off the top layer of white glaze using longitudinal movements, resulting in a relief pattern of aged wood. This pattern has a very contrasting color, which is very far from the natural color of aged wood. To bring the color to a more perfect tone, you need to make it a little muted. To do this, the white glaze is diluted halfway with white spirit and the wooden surface is covered with this mixture.
Aged wood, created on the basis of Belinka blue, has a calm warm tone after final processing. Pinotex gives more interesting decorative effect, with deep dark color basics. It is used in creating aged furniture, as well as in finishing elements.
The third method is brushing and white glaze
This method of aging wood is the easiest and fastest. The wooden surface is treated with a wire brush, then covered with a layer of white glaze.
After the glaze has dried, the surface is again treated with a metal brush. As a result, we have a bleached wooden surface, slightly aged with a relief pattern from a metal brush.
Master class: “How to age wood?”
Let's look at another way to age wood with your own hands. The photo above shows the stages of the work, and below I will describe them in detail.
1. You need to choose the right wood for aging. You should not choose young wood; due to its small fibers, it has no decorative value. Resinous wood will be difficult and long to process. The tree must have a pronounced structure and healthy knots.
3. Using a chisel, you need to make shapeless notches on the edges of the board, as if using an ax.
4. To remove soft wood fibers, you can use a drill attachment with hard nylon fibers. At the same time, you should not be too zealous and put pressure on the tool; the pressure should be light so that the efficiency of the work does not decrease. You can also use a metal brush for processing - in this case the result will be rougher.
5. You can add the effect of wormholes, but this is not for everyone. Using a core or a blunt nail, we make holes 1-2 mm deep.
6. Now you need to clean the surface and open it with Pinotex Uitra paint-varnish. This coating will be resistant even to atmospheric conditions. You can also use Senezh aquadecor.
7. After the paint has dried, the surface should be sanded with fine sandpaper No. 80. The result will be very beautiful effect, when the depressions in the wood remain dark and the protrusions are light, that is, we will highlight the volume and structure of the wood.
8. The final stage is re-opening the redwood.
Aging wood with fire
You can age wood with a gas burner.
And here there are three main ways:
1. Aging without preliminary mechanical treatment of wood. That is, we simply emphasize the texture of the wood by burning it. Then we go through it with fine sandpaper and open it with varnish.
2. First, the wood is mechanically processed - soft fibers are removed, and then fired. This method will give the tree a relief and volumetric look, which will certainly look chic.
3. Intensive burning of wood, which will burn out soft wood fibers and subsequent mechanical treatment with a stiff brush.
Finally, I want to give some advice:
- Aged products made from old boards will look more beautiful and impressive. If you don’t have such material, ask your neighbors or friends; you can often get such material completely free of charge, and it will be much easier to work with.
- Different types of wood will age and stain differently when using the same materials. This must be taken into account when assembling wooden structures.
- Now in stores you can buy ready-made aged boards without performing the operations described above.
