Anti-slip tapes are attached to steps, opposite entrances, around swimming pools, on the floor in gyms and saunas to prevent slips and falls. Anti-slip tapes and corners are made of rubber, thermoplastic elastomer, rubber, abrasive and vinyl.
Abrasive and vinyl anti-slip tapes are self-adhesive and are sold in rolls, like tape, and are easy to cut and install using a regular hair dryer. The surface of such strips can be rough, like sandpaper, or, conversely, soft, so as not to injure your bare feet in the gym or near the pool.
Rubber anti-slip strips and anti-slip coatings made of thermoplastic elastomer are more massive, sold by the meter and in rolls of several meters. Tactile rubber tapes are also self-adhesive (with a protective layer that comes off before installation).
Most often, anti-slip tapes are glued longitudinally to the steps of the stairs at the joints with the edge. Before installation, we recommend that you carefully read the instructions.
Aluminum corners and anti-slip strips:
Aluminum corners and strips with rubber inserts are attached to the corners of stair treads to prevent slipping. Aluminum anti-slip strips and corners are more reliable than self-adhesive ones, as they are attached with screws and dowels.
Aluminum corners are more difficult to install on steps, since not every step can be easily drilled; however, with a sufficient set of replaceable rubber pads, such a profile can serve very well for a long time even in places with intense human traffic.
Anti-slip embedded profiles:
Aluminum anti-slip embedded profiles are mounted under ceramic tiles or other floor coverings, which provides additional fastening strength. U aluminum profiles There are special replaceable rubber inserts in different colors.
The embedded anti-slip profile is the most durable of the solutions we offer: the profiles serve you as long as the porch or step from which they were installed lasts.
Profiles with illuminated stair steps:
Illumination of steps is carried out using several methods:
1. first of all - special profiles with anti-slip insert and backlight with neon wire, exclusive SafetyStep technology.
2. Second option - backlit profiles LED strips(with special inserts).
3. We also remind you that glow-in-the-dark photoluminescent tapes, strips and profiles are also on sale:
Tactile stripes and anti-slip tapes:
Tactile tapes, stripes and profiles are placed in areas of heavy traffic of people, bags on wheels and scooters, carts, carts, rollers, as well as bicycles and vehicles. Tactile anti-slip strips are used to prevent slips and falls, as well as to limit hazardous areas or restricted movement areas.
Floors made of stone, porcelain stoneware, ceramic tiles quite popular. This is understandable - they are practical, comfortable, and aesthetically pleasing. However, with a lot of advantages, there is one significant drawback: when moisture gets in, such a floor becomes very slippery.
During the winter slush, a wet floor in the bathroom or kitchen, or a tiled floor in the office turns from an interior decoration into a real health hazard.
The use of special equipment will help prevent falls and injuries. anti-slip coating.
|
Anti-slip products |
||
|
Technogrip 200B (Spain) |
The world's first anti-slip compound for self-use(processing of ceramics and porcelain stoneware). Suitable for quick treatment of floors: floors in the bathroom, shower, kitchen, stairs, etc. entrance groups etc. (1 l with spray) |
on request |
|
Technogrip 202 (Spain) |
Professional product for anti-slip protection on porcelain stoneware, granite and polished granite floors. Allows you to achieve a high coefficient of friction in a short processing time. (5 l) |
on request |
|
Technogrip 203 (Spain) |
Professional anti-slip product for marble floors. This anti-slip coating allows you to achieve a high coefficient of friction in a short processing time. (5 l) |
on request |
|
Technogrip Bath (Spain) |
Anti-slip treatment for bathroom flooring. Suitable for independent use And retail sales. (5 l) |
on request |
|
Super Antislip (Germany) |
Professional transparent, wear-resistant coating with an abrasive structure. Slip protection even in industrial environments - factories, factories, car washes, etc. (1 kg) |
on request |
Properties of anti-slip coatings
After applying the protective composition, numerous micro-irregularities are formed on the floor surface, due to which the adhesion between the floor covering and the sole increases hundreds of times.
After processing protective composition the floor will not have to be covered with rubber anti-slip mats, which contribute to the accumulation of dust and dirt and make cleaning difficult.
The applied composition does not change appearance floor. Presence protective coating imperceptible, but when walking you can immediately feel the difference between treated and untreated floors!
Porcelain tiles, marble, ceramics, granite and other similar materials can be treated with an anti-slip compound.
Application of this composition does not require the use of special equipment. You can walk on the floor almost immediately after treatment.
The properties of the anti-slip coating last for a long period of time: depending on the intensity of traffic, it can be effective for up to 5 years.
In which areas is it recommended to use anti-slip protective coatings?
Such protection should be applied in any room where there is a possibility of moisture getting on the tiled floor.
It is very important to apply protective anti-slip coatings on stairs and entrances, especially in areas with high traffic.
They should be applied in offices, hallways and trading floors, where the floor is covered with glazed or polished tiles or other materials with a low coefficient of adhesion.
This anti-slip coating will be indispensable in home kitchens, as well as in the kitchens of bars, cafes or restaurants.
In the bath, pool or outdoors slippery tiles? SlipStop offers anti-slip technology that results in a unique coating applied to your tiles. anti-slip treatment with a guarantee of 5 years or more.
ANTI-SLIP TREATMENT
To make the tiles less slippery, you can do it yourself. Supermarkets sell anti-slip pads, tiles, and tapes. The shelf life of such materials is usually short-lived, and they spoil the appearance of the main floor covering with adhesive residues. SlipStop offers a more advanced and durable option: all-round anti-slip treatment using special anti-slip technology, popular in Europe, Asia and the USA for about 35 years. The essence of the process is that in a special way micropores are created in the surface of the pool, which seem to stick to the sole of the feet of bathing children and adults, and prevent them from slipping. At the same time, the quality of the coating is such that the anti-slip properties will remain for five years or more. We guarantee that the composition used to treat the surface of the main floor does not change the appearance, color and structure. Now you can relax calmly in your own bathtub, swimming pool, walk along paving slabs in bad weather - you are no longer in danger of slipping!
Anti-slip treatment can be applied to floor tiles any type of home and outdoors, as well as in the pool.
Slipstop anti-slip treatment is used for processing ceramic, porcelain, glass and stone tiles, concrete flooring, granite, marble, limestone coatings, restoration of stone coatings and self-leveling floors. It is these smooth coatings that are especially dangerous when oily and wet.
ANTI-SLIP SERVICE INCLUDES:
- Spectral analysis of genital surfaces,
- Deep cleaning of floor coverings from dirt and germs,
- Anti-slip treatment of slippery floor coverings,
- Certification of an object or company according to European standards as a safe object,
- 5-year anti-slip guarantee.
Spectral analysis testing of floor coverings is carried out using a device that determines the coefficient of friction.
Friction coefficient depends on the nature and quality of processing of the rubbing surfaces. In addition, the coefficient of friction depends on the speed of relative motion and does not depend on the contact area. This is explained by the fact that no body is absolutely smooth. Therefore, the real contact area may be much smaller than what we observe.
ANTI-SLIP TREATMENT IN MOSCOW INEXPENSIVE
Our company works around the clock, and accepts orders from 8.00 am to 11.00 pm. Anti-slip surface treatment work is usually carried out at night so as not to interfere with work or household activities. If you have any questions, just leave a request for a free demonstration and consultation, and we will contact you.
In the range of services of the SlipStop company anti-slip treatment By unique technology will make your tiles and flooring ideal in Moscow inexpensively!
The tiles used to decorate the floor give it a very beautiful view. But there is one drawback to such a coating, which is that when moisture gets on it, it becomes very slippery. It is to prevent this that an anti-slip tile agent is used. Let's look at the most common option.
Liquid anti-slip agents
The most common anti-slip tile products come in liquid form. In most cases they are two-component, i.e. consist of a base and various additives. The base is varnish or paint, and additives are designed to eliminate slipping.
Additives are most often a crushed abrasive polymer component that looks like very small white balls. As a result of mixing them with the base and applying them to the surface, a coating with visible grain is formed, which prevents slipping.
How to apply liquid tile anti-slip agent
First of all, the coating must be dried, cleaned and degreased. Also, when carrying out work, it is necessary to monitor the temperature environment, which should not be below 10 degrees.
The base is evenly distributed over the surface and left to dry for the time indicated on the package. After this, the anti-slip additive is mixed with varnish or paint in certain proportions and evenly applied to the first layer of base using a brush or roller.
As a rule, it takes about 12 hours for the coating to dry, during which it must be prevented from getting wet. Complete crystallization takes about three days.
The described application method and product is used for porous surfaces. On ceramic or granite tiles it won't hold. To process them you must use specialized means. Their composition is designed to dissolve silicon, which is contained in natural stone or enamel.
This causes very small depressions to appear, which fill with water when moistened. When you press your feet on them, water is squeezed out of the depressions, turning them into a kind of suction cups. Such tools are widely used in Food Industry, swimming pools, fitness clubs, etc.
They are applied very easily using an applicator and left on the surface for about 10 minutes, after which they are washed off cold water. After this, the floor can be used immediately.
