Our company is ready to build houses from 8x9 m timber according to your order. We are engaged in individual low-rise construction, offering customers ready-made projects of wooden buildings. On the website you will find interesting layouts houses at low prices.
Advantages of buildings
- Heat retention. Wooden houses retain heated air well.
- Safety. Wood is an environmentally friendly raw material, completely harmless to humans.
- Efficiency of construction. Houses made of 8 by 9 m timber can be built in just a few weeks.
- Possibility to construct buildings of different configurations.
Operation and purpose
The houses built by our company are suitable for placement on garden plots. They can become a cozy cottage in which you can live during the warm season or all year round. The service life of timber buildings is more than 100 years. At the same time, the building does not require special maintenance. The main thing is to periodically treat the walls with antiseptics to prevent the appearance of mold.
Company advantages
- We are engaged in turnkey construction.
- Big choice finished projects. There are buildings with one floor, a residential attic, and bay windows. In the catalog you will find options for houses ranging in size from 72 to 161 square meters. m.
- Guarantee of the quality of work performed.
We offer our services to clients from Moscow and the region. You can submit an application for construction by phone or by sending a message through the website. After receiving the request, the manager will contact you to discuss the conditions.
Finished projects one-story houses made of timber can be found on the Lestek company website. Natural wood– convenient and comparatively inexpensive material for construction and wall decoration, its thermal conductivity is half that of solid red brick, and it requires virtually no finishing costs. That is why one-story houses made of timber are in great demand among thrifty homeowners in Moscow. Today you can save time and choose ready-made solution and a plan for your future home. Just choose cottage from timber - projects and prices are presented on the website in a convenient form. In the section you will find projects of one-story wooden houses from timber with a width of 140 mm, 144 mm, 188 mm or 194 mm - these profile indicators correspond to the thickness of the wall.
What else is good about one-story houses made of profiled timber?
In addition to being absolutely environmentally friendly, they compete in price with light frame cottages and have the same durability indicators as houses made of blocks. Due to the low height, a one-story layout is advantageous during construction small houses, cottages or cottages and saves money on heating in the future. Carefully thought out projects of one-story houses made of profiled timber costing from 189 thousand rubles are clear confirmation that such a house is not only inexpensive, but also convenient solution compact country residence. The walls of the house do not require finishing - it is enough to treat them with an antiseptic every 5 years and, if desired, with colored impregnation.
Who to entrust the construction of a one-story house
In addition to the fact that the Lestek company is pleased to offer options from the catalog finished houses with a photo, we can develop a project for a 1-story house made of timber to suit your individual requirements. This way you will receive perfect option for the site and landscape. To find out more about house projects made from profiled timber or ask about the material, call the phone number listed on the website or tell us your question using the form on the website.
Single storey timber house turnkey can be located on plot of land outside the city and within its boundaries. Wherever it is erected, it will blend harmoniously with the surrounding landscape. This object looks great among urban buildings or against the backdrop of nature. Considering its price, which is affordable for the majority of the population, this option rightfully enjoys well-deserved popularity.
- The advantages of one-story buildings include the ability for elderly family members to live comfortably, since such timber houses do not have flights of stairs. This makes life much easier for the latter and simplifies life for the youngest members of the family – the younger generation. Therefore, all relatives, regardless of age, can easily accommodate here.
- It is also worth mentioning that the absence of a second floor is more of a plus than a minus. After all, there is no need to lay all the associated communications upstairs. This, in turn, significantly reduces the cost of building a one-story house, making the price even more affordable. Thus, the final cost of the home in comparison with other analogues is very attractive.
The Northern Terema company has been building one-story houses made of timber for many years. Thanks to the experience gained, high-quality raw materials, and modern equipment, we carry out turnkey construction inexpensively and quickly. We will independently produce and deliver the object you have chosen to short term. Our confidence in the quality of the work performed is expressed in the guarantee that we provide to each client.
×1. Base. Strapping and purlins for partitions - calibrated timber coniferous species section 150x100 mm (per edge), in one row, floor beams - calibrated coniferous timber with a section of 150x50 mm in increments of no more than 60 cm. (Distributed load over an area over 350 kg/m2) Treatment of the base with fire-bioprotective compounds is not included. (Available as option)
2. Subfloors: calibrated softwood board with a section of 25x100 (150) mm, 2nd grade.
3. Finished floors: planed tongue and groove board 27 mm thick, chamber drying. (Replacement with 36 mm tongue and groove is available as an option). The terrace floors are calibrated timber with a cross-section of 100x40 mm, planed on the front side, laid through a gap.
4. Floor heights: First floor: 2.25 m (16 rows) Second floor: 2.10 m.
5. Walls and partitions. Planed profiled timber with a cross-section of 140x90 mm (wall thickness 90 mm), flax-jute cloth is laid between the crowns. Connection profile - “Finnish” (double tenon) Profile outside timber: straight or semi-oval, at the request of the customer. timber natural humidity(Kiln drying timber available as an option) ATTENTION! The assembly of the log house is carried out in " warm corner" (“root tenon”) according to GOST 30974−2002, on iron dowels (nails 200 mm) with recess (the head of the nail is driven into the timber with a punch, which prevents the timber from hanging on the nails during the shrinkage process) Only with us these services are free and are already included included in the basic package.
6. Insulation. The building is insulated with rolled mineral non-flammable insulation Knauf (Thermal conductivity λ0, W/(mK), no more than 0.040 according to GOST 7076-99), or an equivalent. Floor insulation thickness and ceilings, attic walls (if available): 100 mm. Internal insulation (sound insulation) thickness frame partitions and interfloor ceilings (if any): 50 mm.
8. Interfloor overlap:
Calibrated coniferous timber with a cross-section of 150x50 mm in increments of up to 60 mm (Distributed load over an area of more than 350 kg/m2) For a span of more than 4 m, a support beam (matica) is installed FREE OF CHARGE, eliminating deflection and creaking of the floor.
9. Pediments (tongs):(lining) 90 (120) mm, coniferous, chamber drying, or from planed profiled timber with a section of 140x90 mm, according to the project.
11. Rafter system:
calibrated coniferous timber with a section of 100x40 mm, in increments of up to 1 m for a roof slope of more than 30 degrees, and 150x40 mm for a roof slope of less than 30 degrees.
12. Lathing:
13. Roof extensions: 27-32 cm, hemmed with planed profiled boards (lining) of coniferous species, chamber drying, in 3 boards.
14. Roof: finishing coat Ondulin with a choice of colors (green, burgundy, brown), including all necessary roofing elements. (Metal tiles, bitumen shingles are available as an option)
15. Windows. Wooden frames, double glazing, with pivoting sash. Dimensions according to the project.
16. Doors: Wooden, paneled, blind 2.05x0.8 m with installation of platbands, hinges, slopes. (Iron Entrance door available as an option)
The bowstring is made of planed softwood timber with a cross-section of 150x100 mm, the steps are made of planed boards with a cross-section of 200x40 mm.
18. Fencing: flat carved balusters
19. Drainage system:
"Turnkey winter cottage" package
×1. Base.
2. Subfloors:
3. Finished floors:
4. Floor heights:
5. Walls and partitions. Planed profiled timber with a section of 140x140 mm for the walls and 140x90 mm (wall thickness 90 mm) for the partition; flax-jute fabric is laid between the crowns. Connection profile - “Finnish” (double tenon) Profile of the outer side of the beam: straight or semi-oval, at the request of the customer. timber natural humidity ATTENTION!
6. Insulation. The building is insulated with roll (horizontal surfaces) and slab (vertical and inclined surfaces) mineral non-flammable insulation Knauf (Thermal conductivity λ0, W/(mK), no more than 0.040 according to GOST 7076-99), or an analogue, Thickness of insulation of floors and ceilings, walls attics (if available): 150 mm. Thickness of insulation (sound insulation) of internal frame partitions and interfloor ceilings (if any): 100 mm.
7. Vapor barrier and wind protection. WITH inside insulation in insulated structures is laid vapor barrier film membrane type (Izospan B, Ondutis R 70, or an analogue) to prevent moisture from entering the insulation, which significantly improves thermal conductivity. On the outside of the insulation, a membrane-type hydro-windproof film is laid (Izospan A, Ondutis A 100, or equivalent)
8. Interfloor covering:
9. Pediments (tongs): Frame-panel, sheathed with planed profiled boards (lining) 90 (120) mm, coniferous, chamber drying, or from planed profiled timber with a section of 140x140 mm, according to the project.
10. Second floor (if available): Frame-panel or timber, depending on the project. Frame walls and the ceilings of the second floor are sheathed from the inside with planed profiled boards (lining) 90 (120) mm, softwood, chamber drying.
11. Rafter system:
12. Lathing: Calibrated softwood board with a cross section of 25x100 mm, grade 1-2, with a waterproofing gasket windproof film membrane type (Izospan A, Ondutis A 100, or analogue)
13. Roof extensions:
14. Roof:
15. Windows. Wooden frames, double glazing (double glazing), with pivoting sash. Dimensions according to the project.
16. Doors: Wooden, paneled, solid 2.05x0.8 m. with installation of platbands, hinges, slopes. Iron entrance door. (StroyGost 5-1, or equivalent)
17. Stairs to the second floor (if available): The bowstring is made of planed coniferous timber with a cross-section of 200x50 mm, the steps are made of planed boards with a cross-section of 250x50 mm, the staircase fencing is made of turned factory-made balusters.
18. Fencing: open terrace, balcony is performed flat carved balusters or planed timber with a cross section of 40x100 mm, at the request of the customer.
19. Drainage system: Not installed (available as an option) Download (pdf, 577 Kb)
Complete set "Winter cottage for shrinkage"
×1. Base. The strapping and purlins for the partitions are calibrated softwood timber with a cross-section of 150x150 mm (per edge), in one row, the floor beams are calibrated softwood timber with a cross-section of 150x100 mm in increments of no more than 60 cm. (Distributed load over an area of 550 kg/m2) Treatment of the base with fire-bioprotective compounds is not included. (Available as option)
2. Subfloors: calibrated softwood board with a section of 25x100 (150) mm, grade 1-2.
3. Finished floors: Not fulfilled.
4. Floor heights: First floor: 2.35 m (17 rows) Second floor: 2.20 m.
5. Walls and partitions. Planed profiled timber with a section of 140x140 mm for the walls and 140x90 mm (wall thickness 90 mm) for the partition; flax-jute fabric is laid between the crowns. Connection profile - “Finnish” (double tenon) Profile of the outer side of the beam: straight or semi-oval, at the request of the customer. ATTENTION! The assembly of the log house is carried out in a “warm corner” (“root tenon”) according to GOST 30974−2002, on wooden dowels (hardwood, chamber-drying, 25 mm cross-section), which prevents the timber from hanging during the shrinkage process. Only with us these services are free and included in the basic package.
6. Insulation. Not executed.
7. Interfloor covering: Calibrated coniferous timber with a cross-section of 150x100 mm in increments of up to 60 mm (Distributed load over an area of more than 350 kg/m2) For a span of more than 4 m, a support beam (matica) is installed FREE OF CHARGE, eliminating deflection and creaking of the floor.
8. Pediments (tongs): Frame-panel, sheathed with planed profiled boards (lining) 90 (120) mm, coniferous, chamber drying, or from planed profiled timber with a section of 140x140 mm, according to the project.
Without finishing.
10. Rafter system: calibrated softwood timber with a section of 150x40 mm, in increments of up to 0.8 m.
11. Lathing: Calibrated softwood board with a section of 25x100 mm, grade 1-2, with a membrane-type waterproofing windproof film (Izospan A, Ondutis A 100, or equivalent)
12. Roof extensions: 32-40 cm, hemmed with planed profiled boards (lining) of coniferous species, chamber drying, in 4 boards.
13. Roof: finishing coating Ondulin with a choice of colors (green, burgundy, brown), including all the necessary roofing elements. (Metal tiles, bitumen shingles are available as an option)
14. Windows and Doors:
Not executed.
16. Fencing: shrinkage compensators.
17. Drainage system: Not installed Download (pdf, 564 Kb)
Complete set "Turnkey residential building"
×1. Base. The strapping and purlins for the partitions are calibrated softwood timber with a cross-section of 200x150 mm and 200x100 mm, in two rows, the floor beams are calibrated softwood timber with a cross-section of 200x100 mm in increments of no more than 60 cm. (Distributed load over an area of over 700 kg/m2) All wooden elements grounds.
2. Subfloors: calibrated softwood board with a section of 25x100 (150) mm, 1st grade.
3. Finished floors: planed tongue and groove board, 36 mm thick, kiln dried. The terrace floors are calibrated timber with a cross-section of 100x40 mm, planed on the front side, laid through a gap.
4. Floor heights: First floor: 2.50 m (18 rows) Second floor: 2.30 m.
5. Walls and partitions. Planed profiled timber with a section of 190x140 mm (wall thickness 190 mm) for the walls and 140x140 mm partitions; flax-jute fabric is laid between the crowns. Connection profile - “Finnish” (double tenon) Profile of the outer side of the beam: straight or semi-oval, at the request of the customer. timber natural humidity(Kiln drying timber available as an option) ATTENTION!
6. Insulation. The building is insulated with slab mineral insulation based stone wool Rockwool Light Batts Scandic (Thermal conductivity λ0, W/(mK), no more than 0.040 according to GOST 7076-99), or equivalent. Thickness of insulation of floors and ceilings, attic walls (if available): 200 mm. The thickness of insulation (sound insulation) of internal frame partitions is 100 mm and interfloor ceilings (if any): 150 mm.
7. Vapor barrier and wind protection. On the inside of the insulation in insulated structures, a membrane-type vapor barrier film (Izospan V, Ondutis R 70, or an analogue) is laid to prevent moisture from entering the insulation, which significantly improves thermal conductivity. On the outside of the insulation, a membrane-type hydro-windproof film is laid (Izospan A, Ondutis A 100, or equivalent)
8. Interfloor covering:
9. Pediments (tongs): Frame panels, covered with planed profiled boards (imitation timber) 18x140 mm
10. Second floor (if available): Frame-panel or timber, depending on the project. The frame walls and ceilings of the second floor are sheathed from the inside with planed profiled boards (lining) 90 (120) mm, coniferous, kiln dried.
11. Rafter system:
12. Lathing:
13. Roof extensions: 42-50 cm, hemmed with planed profiled boards (lining) of coniferous species, chamber drying, in 5 boards.
14. Roof: finishing coat metal tiles Monterrey, polyester, 0.45 mm thick, with a choice of colors (RAL 3005, 3011, 5005, 6005, 7004, 7024, 8017) including all necessary roofing elements. ( Bituminous shingles available as an option)
15. Windows. Metal-plastic double-glazed window white, profile 70 mm, triple glazing (double-chamber), with tilt-and-turn sash. Dimensions according to the project.
16. Doors: Wooden, paneled, solid 2.05x0.8 m. with installation of platbands, hinges, slopes. The iron entrance door is insulated. (Garda)
17. Stairs to the second floor (if available): The bowstring is made of planed coniferous timber with a cross-section of 250x60 mm, the steps are made of planed boards with a cross-section of 300x50 mm, the staircase fencing is made with turned factory-made balusters.
18. Fencing: An open terrace or balcony is made with turned factory-made balusters or planed timber with a cross section of 40x100 mm, at the request of the customer.
19. Drainage system: Verat plastic drainage system is installed in white or Brown. 2.50 m (18 rows) Second floor: 2.30 m.
5. Walls and partitions. Planed profiled timber with a section of 190x140 mm (wall thickness 190 mm) for the walls and 140x140 mm partitions; flax-jute fabric is laid between the crowns. Connection profile - “Finnish” (double tenon) Profile of the outer side of the beam: straight or semi-oval, at the request of the customer. ATTENTION! The assembly of the log house is carried out in a “warm corner” (“root tenon”) according to GOST 30974−2002, on wooden dowels (hardwood, chamber-drying, 25 mm cross-section), which prevents the timber from sagging during the shrinkage process. Only with us these services are free and included in the basic package.
6. Insulation. Not executed.
7. Interfloor covering: Calibrated coniferous timber with a cross-section of 150x50 mm in increments of up to 60 mm (Distributed load over an area over 550 kg/m2) For a span of more than 4 m, a support beam (matica) is installed FREE OF CHARGE, eliminating deflection and creaking of the floor.
8. Pediments (tongs): Frame panels, covered with planed profiled boards (imitation timber) 18x135 mm, coniferous wood, chamber drying, or from planed profiled timber with a section of 190x140 mm, according to the project.
9. Second floor (if available): Without finishing.
10. Rafter system: calibrated softwood timber with a section of 200x40 mm, in increments of up to 0.6 m.
11. Lathing: Calibrated softwood board with a cross section of 25x100 mm, grade 1-2, with a membrane-type waterproofing film (Izospan D or equivalent)
12. Roof extensions: 42-50 cm, hemmed with planed profiled boards (lining) of coniferous species, chamber drying, in 5 boards.
13. Roof: finishing coat metal tiles Monterrey, polyester, 0.45 mm thick, with a choice of colors (RAL 3005, 3011, 5005, 6005, 7004, 7024, 8017) including all necessary roofing elements. (Asphalt shingles available as an option)
14. Windows and Doors: Not installed. Window openings are made according to the design; in the openings of timber walls, constrictions are made from whole timber to accompany uniform shrinkage.
15. Stairs to the second floor (if available): Not executed.
16. Fencing: There is no open terrace or balcony. Terrace posts are installed on screws shrinkage compensators.
17. Drainage system: Not installed Download (pdf, 564 Kb)
