DIY Venetian trowel. Tools for decorative plaster: Venetian trowel. Preparation for finishing work

When working with decorative plasters, an important role is played by the choice of the right tool and its condition. Expensive material, for example, Venetian plaster, also requires high-quality application. In this article we will talk about how to choose a trowel for a “Venetian” and how to care for the tool during work so that it does not ink or scratch the coating.

in the photo there is a crown trowel from Pavan

Description

The Venetian plaster trowel is a tool for applying decorative covering, popularly called “stroker”. It has a rectangular work surface made of of stainless steel. Unlike a spatula, the trowel handle is not located in the same plane with the blade, but above it. Thanks to this, all four edges of the canvas can be used when working with plaster.

The corners of the Venetian trowel are rounded so as not to leave grooves or scratches on the decor.

Like the “Venetian” itself, the tool for applying it comes from Italy, and, of course, its best manufacturers are located there.

Selecting size and shape

Choose size Venetian trowel is needed based on the volume and complexity of the work ahead. Most manufacturers professional tools They offer three sizes:

• small - 200 x 80 mm
• medium - 240 x 100 mm
• large - 280 x 120 mm

Big needed to apply the first layer. With its help, you can quickly finish plastering on large area. She finds it uncomfortable to create a drawing and apply small strokes of plaster.

The average size taken when forming a pattern and finishing texture. Decorative plaster, including Venetian plaster, is also polished with a trowel 240 x 100 mm.

Small tool needed only to create a drawing. It can be inconvenient to make a smear of the desired size with a medium one.

Expert opinion

Alexander Guryanov

Plasterer and craftsman decorative finishing

Trowel 240 x 100 is universal, it is needed more often in work, therefore it is more necessary. If you are just starting to work with decorative coatings and want to buy a tool of one size, then choose the medium one.

Not all trowels have a rectangular blade. There are those that have smaller sides of different lengths, for example, 80 and 90 mm or 90 - 110 mm. The result is a trapezoid shape.

It is more convenient to work with such a tool, there is less chance of leaving scratches on the plaster. It can be held either with the wide side up or with the narrow side. Due to this, the created decorative pattern will be more interesting and varied.

To work in difficult areas, specially shaped trowels are produced.

If you want to decorate your room in a medieval style, then applying Venetian plaster would be an ideal option. It will give the room a unique sophistication and emphasize the refined taste of the owners.

In the video you can see in what order and how to properly apply Venetian plaster on the walls.

For work you need to prepare the following tools and materials:
- soft fur roller;
- container for primer;
- electric drill with a mixing attachment;
- Venetian trowel;
- two spatulas 30 cm and 15 cm;
- a surface polishing machine with an attachment designed for polishing wax;
- primer;
- several jars of color;
- plaster;
- wax

Preparing the walls

Before creating Venetian plaster, you need to thoroughly prepare the vertical surface. The walls are carefully leveled and puttied using a special latex putty.

After the walls have dried, it will need to be treated with a primer, which is designed for deep penetration. This is important for leveling the absorbency of the surface, and also prevents the formation of unpleasant fungi or mold.

The primer dries within 12 hours. However, it is best to wait at least 24 hours before moving on to the next step.

After this, you can begin treating the walls with a covering primer. It will significantly increase the adhesive properties of the surface.

For this method of application, you need to use tinted primer. In this case, the color should be approximately the same as the Venetian plaster itself will be painted.

The color is added to the primer and mixed. We apply it to the walls using a roller, in hard to reach places– brush. The covering primer dries completely in just a couple of hours.

After the surface has completely dried, it is cleaned with a spatula.

Preparing the material

Venetian plaster is mixed with dye. The resulting mass is thoroughly mixed using a special “mixer” attachment on a drill. In order for the color to be uniform, the mixing process must be at least 4 minutes, otherwise unevenness of tone may be noticeable on the wall. After drying, the color of the plaster does not change, so there is no need to pre-paint it. Try to prepare the required amount of plaster at one time, because the second time it will be impossible to obtain exactly the same shade. It's best to do it with a small margin.

The material is applied to a 30 cm surface with a spatula or Venetian trowel. The plaster should be laid in at least 2 layers, and preferably three. When applying Venetian plaster, unevenness, even some carelessness, is required. It is applied with the edge of a trowel using the “dry to wet” method. This is necessary so that there are no visible points of contact between each stroke.

This plaster hardens fairly quickly, about two hours. Hardening time depends on the humidity of the room.

After the surface is completely dry, it is treated with a spatula. The second layer should be applied in exactly the same way.

The final, final layer must be applied 15 cm with a spatula to the “scrape”; in this case the layer comes out transparent.

Sixty minutes is enough to start ironing. The surface is given a gloss and the design appears. The difficulty of the work lies in the fact that it is very easy to scratch the plaster or tear off a small area, which cannot be corrected.

We carry out finishing work

So that the surface is protected from excess moisture, and you can make it wet cleaning, decorative wax must be applied to the plaster. This should be done using a trowel or a 15 cm spatula. Wax should only be applied 24 hours after the Venetian plaster has been applied. It is important to monitor this. so that the wax layer is as thin and uniform as possible. This will protect the walls from cracking and peeling.

If instruments had titles - Honored or National Instrument of All Nations, then the trowel would be one of the first to receive these titles. Laying bricks, plastering, screeding floors, mixing mortar - the tasks that are performed with its help can be listed for a very long time!

Trowel - steel or plastic?

In general, this instrument is much better known to many in folk music - the trowel! This name somehow even more clearly conveys its nationwide fame and explains the presence of every master. And it should be noted that most builders choose it very carefully, trying it on many models so that the choice falls on the most convenient option for his hand. Some people like them big and wide, others will work with a compact trowel, and the variety of shapes allows you to choose a tool for a particular type of work.

The construction trowel is quite simple in its design and consists of only a few parts - a working platform, a handle, a neck connecting the handle and the platform, and a metal butt attachment at the end of the handle. The last detail is not present on all trowels, although it is especially useful for a mason, because it is with the end of the handle that it is most convenient to knock on the brick so that it sits more tightly in the mortar. Without a metal butt, the handle will quickly become unusable.

The shape of the bend of the neck between the handle and the platform also plays a role; for example, when working with heavy solutions, the correct bend can shift the center of gravity relative to the hand, which makes work faster and easier.

In most cases, the working platform is made of a sheet of polished high-carbon steel, however, a plastic trowel is also found. Most often, a plastic trowel is used when plastering works oh, masons invariably give preference to reliable steel tools, which can be used to stir the hardening mortar and to pick out incorrectly laid bricks. The handle can be either wooden or plastic; this does not play a special role, although in cold weather it is much more pleasant to hold wood in your hands.

The size and weight of the trowel is an individual matter, because, according to by and large, the instrument is an extension of the master’s hand. Manufacturers share the same opinion on this matter and produce products of a wide variety of sizes. When choosing a trowel for yourself, you should understand whether it will be convenient and easy for you to work with the tool for a long time, will your hand get tired?

Trowel shapes – different shapes for different tasks!

If everyone chooses the weight and dimensions for themselves, then the forms are designed taking into account the possible tasks that the master will perform. Thus, a triangular shape with sharp corners is associated primarily with concreting, and triangular tools with round corners are typical for masons - they are convenient for both mixing mortar and collecting excess. Platform sizes range from 120 to 180 mm. The drop-shaped shape of trowels is in demand among tilers - it is more miniature and allows you to capture the required portion of the mortar under the tile.

A special trowel is also in demand among masons, one side of which is made in the form of a narrow blade, which is convenient to guide along a horizontal seam, while the other side is bent for processing vertical seams. This tool is also called a jointer. Other forms of instruments (trapezoids, trapezoids with cut corners) are nothing more than experiments of designers and manufacturers. How convenient it is to work with such forms is up to each master to decide separately. Rectangular trowels have a structure that is distinctive from the rest - the handle is attached not to the side of the platform, but to it on the opposite side.

Such tools are used for applying, smoothing and rubbing plaster. Tilers use different sizes of teeth, which are usually located on two sides adjacent to each other. There are also two-handed trowels with enlarged platforms for applying and leveling the first layers of coarse materials, for example, facade plasters. The spatula-trowel combines the advantages of both tools - the platform has a shape similar to a spatula, but the handle is connected to it using a bend characteristic of trowels. This spatula is convenient to use when mixing plaster and sealing joints between plasterboard sheets.

Tool for the Venetian – how to make fashionable plaster?

We would like to give special mention to the Venetian plaster trowel, which is specially designed and adapted to create this stunning finish. In their structure they resemble rectangular trowels with a handle attached to back side, however, they have a number of features. Rectangular trowels are often called spatulas, although this is not entirely true, however, the main thing is that you understand what we are talking about. To work with Venetian plaster, you will need not one spatula, but several different sizes - wide and several narrow.

In addition, if on finishing layer If you plan to apply a layer of wax, you will need a specialized waxing spatula, as well as wool fabric or a suede mitten for polishing the surface. The choice of tool should be taken very seriously, since the result of the work largely depends on it. The trowel used to apply the main layers of Venetian plaster has its characteristic features: it must be rectangular, with rounded edges to avoid scratches on the surface of the finish, and have increased wear resistance, which will only be provided by high-quality stainless steel, which does not leave dark marks characteristic of for steel tools.

The blade should also be flexible enough to distribute the force when pressing on the layers. The working surface must be polished to a mirror finish to prevent the mixture from sticking to the tool. Since the work ahead is quite labor-intensive, you must choose the shape of the handle that is most convenient for you. It’s up to you to decide which material for the handle you prefer – most often, handles are made of wood or two-component rubber.

Venetian Plaster Tools – Proper Use

Besides the right choice, you also need to learn how to use the tool correctly. Don't worry too much complex techniques is not expected - with a little practice, even a beginner can master the main movements and principles. So, you need to apply the solution to the trowel with a spatula. Pressing it to the surface, you need to move it at an angle of 30° with slight pressure, performing movements in accordance with the intended pattern.

It is important to ensure that no solution remains on the tool, since when it dries, it will leave marks on the surface of the plaster, so from time to time the platform is wiped with a dampened rag. These types of trowels are used to apply and distribute base layers, which requires wide and chaotic strokes to ensure smooth surface. The pattern characteristic of the “Venetian” is formed on last stage, when narrow spatulas are used to apply a layer, one of which applies and spreads the solution, and the second immediately compacts it. Working with two spatulas at the same time is an indicator of the skill of an individual master.

Probably every owner of an apartment or house dreams of a beautiful, luxurious and cozy interior. Many people also want unique design, and some are relatively inexpensive. All these criteria are met by Venetian plaster, which is popularly called simply Venetian.

It is named Venetian because it gained very wide popularity during the Renaissance in Venice, where it was widely used in the design of palaces and castles. They decorate both residential and public buildings. She will fit perfectly in both classic design, and in a modern interior.

Selection, production and application

Venetian plaster is a method of decorative design and imitation of a surface like stone (quartz, onyx, lapis lazuli, etc.) or popular marble of different shades. Its main component is stone chips, which are mixed with acrylic. But you can also create the effect of copper, silver, gold, bronze, imitate leather, wood and fabric (silk, burlap, etc.) using various types of application techniques. It is used as both an internal and external decorative element.

It is worth knowing that Venetian plaster can be used to decorate not only walls, partitions, and ceilings, giving them a textured look. Plaster floors are extremely rare. As an element of interior decor, it can be used in the living room, kitchen, bathroom and any other room.

The choice of the future color and texture of the Venetian is up to the owner of the house. The plaster itself is transparent, which allows it to play beautifully with shine when sun rays, and the dye is added before application. It can be applied to concrete and brick, as well as wood. The only difference is in the methods of preparing the surface on which it will be applied. It is also possible to apply a design on the plaster, which will give it a relief look and uniqueness. It can also be matte or glossy. A matte or glossy surface can be obtained by applying various types wax.

Advantages and disadvantages of the Venetian

The advantages are obvious:

• Durable
• Water and moisture resistant
• Easy to care for
• Environmentally friendly
• Long service life (at least 20 years)
• Mold free
• Resistant to temperature changes

The only downside is the cost. It's not really a budget option. But this cannot be considered a disadvantage, since the end result is completely justified. Such luxury and sophistication cannot be achieved with other materials. We will tell you further how to make Venetian plaster with your own hands from ordinary putty. To make Venetian plaster with your own hands we will need:

• very fine stone chips or marble flour (for marble walls)
• slaked lime (putty) or acrylic additives
• dyes (colors)
• pure water

The recipe is simple: you need to properly mix the composition in equal proportions of stone chips and slaked lime, then add a little soap and mix well.
At the end we add dyes. Must select desired color Venetian, this stage is called tinting. Tinting Venetian plaster is an important preparation step. The comfort of the apartment or house and the state of mind of the owner will depend on the future color. The stores will provide you with a huge range of all kinds of colors and shades. And it is important to know that when the color dries, it becomes lighter by one tone, and sometimes by two tones.

It should be remembered that when preparing Venetian, the room temperature should be above 10 degrees Celsius. You can also buy ready-made plaster to make your task easier. After all, it is worth remembering that when making plaster it is necessary to clearly know the ratio of materials, and dilute the paint only in a clear and correct proportion, since the shade of the surface may differ in the future.

DIY Venetian plaster (video)

Wax helps to color the plaster in the desired color when using dyes. You can also use it to repaint the same surface. It also helps with restoration. The consumption of the Venetian depends on the area and the number of layers that will be applied. On average, consumption is 0.5 kg of material per 1 square meter of surface.

Required Tools

Materials and tools for preparing and applying Venetian:

• ready plaster
• water emulsion
• putty
• primer
• dye
• drill with mixer attachment
• trowel for the Venetian
• narrow spatula
• Japanese spatula
• different types of trowels for decoration
• ironer
• abrasive sponges and rags
• coarse and fine sandpaper
• mixing containers

Surface preparation and application

1. We plaster or clean the walls (or ceiling) of wallpaper, paint, etc.
2. If there are cracks, holes, or potholes, they must be repaired using putty.
3. We clean the walls from roughness and protrusions
4. We first treat the surface with starting putty, let it dry and then apply finishing putty.
5. Next, we sand the walls with coarse sandpaper.
6. The last stage of preparation is applying a primer to the surface. After drying (3-4 hours), the procedure must be repeated. Sometimes a third layer is applied, applied to match the tone of the future Venetian.

It is important to know that working with this material is a labor-intensive and painstaking process. U the best master time is spent 5-6 times more than finishing ordinary plaster. Therefore, in order to get the hang of applying it, it is recommended to first practice on panels or individual sections of the walls. Basic rules and technology for applying Venetian:

• The first layer must cover the entire surface area. The layer should be thin
• Next, the layers are applied with spatulas or a trowel in an arc to form the required pattern (the number of layers is on average from 4 to 12, depending on the desired texture)
• Layers are applied with short breaks, the plaster has had time to dry.


• Each subsequent tone must be different in tone from the previous one in order to create the necessary pattern and perspective. You can also put different (contrasting) colors. The spatula must be wiped well after each stroke.
• Next, you need to apply it to the walls. thin layer wax to make it waterproof and create a matte or glossy surface. And after the wax has completely dried, the smooth surface is polished with soft flannel.

The wax dries quickly, within 30-40 minutes. But touching the surface is strictly prohibited for 6 hours after opening with wax. To avoid dents, scratches and marks on the wall. There are several techniques for applying Venetian plaster with your own hands:

1. Application of classic plaster
2. Applying plaster in two tones
3. Applying marbled plaster

A master class in a video lesson on the technique of applying marbled plaster can be viewed in the video:

otdelkasam.ru

Characteristics and composition of Venetian plaster

The composition is prepared by mixing marble chips and slaked lime. Once applied to the wall, it looks like natural marble. To make the design stand out more clearly, the mixture contains coloring agents.

When clay is added, stains with a pink or red tint are formed on the walls. The surface looks like laid marble slabs, only without seams.

Plaster became especially popular in Venice due to its resistance to moisture. This is where its name came from. Not only the walls, but also the ceilings were plastered here.

Currently, all 3 components are used, only modern binding elements can be added instead of lime. Acrylic dyes, granite crushed into fine crumbs, and rubber juice are used as additives. The basis is marble dust.

Advantages and disadvantages

The material has many advantages:

1. Depending on the technique used to perform the work, imitation stone is reproduced different color. Any pattern is created that will match the type of interior.
2. Due to the high reflectivity of light, a glowing effect is achieved. This is especially evident when rubbing the surface with wax.
3. Resistance to external conditions: temperature changes or mechanical stress.
4. If the coating technology was followed correctly, then the service life is 25 years.
5. There are no joining seams on the surface.
6. If there is a wax coating, color preservation is ensured for a long time.
7. Possibility of using the coating in the bathroom, since the plaster is not afraid of moisture.

There are significantly fewer disadvantages:
­

• high cost of material;
  ­
• good basic preparation is required.

Required Tools

Before you start, you need to prepare the basic tools, which are presented below:

• Trowel. A layer of plaster is applied to the wall, and then the veins are formed.
• Japanese spatula. It is used to apply the solution and wax.
• The spatula is narrow. The solution is mixed and transferred to a wide spatula.
• Sandpaper. Used for surface cleaning.
• Containers of various sizes. Solutions of different colors are mixed and stored.
• Rags. Polishing of small or hard-to-reach areas is in progress.
• Bulgarian. A special attachment is put on and a large surface is polished.
• Drill. A nozzle is inserted, which allows you to do quick kneading.

Rules for applying plaster

Before you start applying plaster with your own hands, you need to thoroughly study the process. Without work experience nothing will work out. Depending on the movement of the tool, a different pattern is obtained.

It is better to experiment on a small piece of plywood. If you start finishing right away, you will have to remove everything later. This is not economical given the price of the material.

Creation of material

The diluted solution is not sold; a dry mixture is purchased. Then she gets divorced.
Water is added at a temperature of at least 10 degrees. The quantity is indicated in the recipe.

Mixing is done with a drill with an attachment. The solution is brought to the consistency of sour cream. After this, dye is added.

Surface preparation

Work begins with surface preparation. The sequence is shown below:

1. Wallpaper, paint and old plaster are completely removed. All stains and existing dust are removed.
2. All defects are being eliminated. If there are protruding places on the wall, they are leveled with a grinder. The cracks are covered up cement mortar. All irregularities are smoothed out using sandpaper. It is necessary to obtain a flat surface in order to carry out further work.
3. The final stage of preparation is underway. It is necessary to obtain a flat surface. To do this, first, it is primed, and then a starting and finishing layer of putty is applied to it. It is important to remember that defects that have not been eliminated will manifest themselves when applying Venetian putty.

Tinting Venetian plaster

The cooking method is shown below:

1. The required color is selected according to the tinting fan. It contains a large number of shades. Their size reaches several hundred pieces.
2. Prepare a thick sheet of paper with a set of dyes. To make the knead, prepare a small container with a narrow spatula.
3. If you want to get a dark red color, take white plaster as a base. Dyes are selected: red and brown. To reduce brightness, black is also selected.
4. In the first stage, the red dye is shaken and poured into the white plaster.
5. Stirring is carried out until a uniform shade is obtained.
6. The first test begins. To do this, apply a small strip to the paper using a narrow spatula. It is then matched to the color on the fan.
7. A red-brown color is added to the mixed mass. The procedure is completely repeated. The colors are applied to paper and compared with the fan.
8. Black is added to reduce brightness.
9. At the last stage, a final comparison is made with the colors on the fan and the necessary adjustments are made. Then, according to this principle, a solution is prepared, only in the required scale.

Applying plaster to the surface

The table shows, as an example, the classic version of plaster with the addition of one tone.

1. The required color of plaster is prepared. A small area is selected, no more than 1 square meter in size. m.
2. The first base coat is applied. It performs the function of smoothing the surface. Has a small thickness.
3. Dries within 1 hour.
4. When applying the second layer, veins form. It also has a small thickness.
5. Using a Japanese spatula, the third layer of plaster is applied, which is called the finishing layer. At this time it is necessary to press it firmly. At the same time, all excess plaster is removed.
6. Sandpaper is used to sand the not yet completely hardened layer.
7. As soon as the finishing layer dries, wax is applied on top with a spatula.
8. After drying, after 20 minutes, wipe the surface with a cloth.

Application in two tones

Below are instructions for applying plaster in 2 tones.

1. 2 plaster compositions are prepared: 1 is light, and the other is darker.
2. Select an area of ​​1 square meter on the wall. m and a layer of light plaster is applied.
3. As soon as the first layer has dried, begin applying the second. It will also be light. As you work, veins will begin to appear on the surface. After this, a dark solution is applied in the form of stripes and spots using a Japanese spatula. This begins the formation of the pattern.
4. The finishing layer is being applied. The spatula is pressed with great force.
5. After drying, sanding is carried out.
6. A layer of wax is applied, and then wiped with a rag.

Marble imitation plaster

This option is one of the most difficult. Requires experience. The order of steps is given below:

1. Red, black and white mixtures are prepared. The first one is basic. It is applied to the surface from right to left, diagonally, in stripes.
2. After the first layer has dried, the second is applied. To do this, put a red tint on a spatula, add a little white and stir. Then a little black is added and the mixture is stirred again.
3. The movement of the spatula is from right to left. At the same time, veins begin to appear.
4. The second layer is finally formed.
5. The plaster is rubbed down with fine-grained sandpaper.
6. A layer of wax is applied to the surface.
7. Wiping is carried out using a special nozzle. This can also be done with a rag.

Ironing rules

To carry out ironing, the surface needs to wait 40-50 minutes for the finishing layer to dry. It is better to carry out the procedure on an area no larger than 0.5 square meters. m, then move on to the next one.

The ironing process involves rubbing the surface with a trowel. The tool is selected without defects. There should be no burrs on it, otherwise it will affect the quality of work. Wiping is carried out with smooth circular movements. After some time, shine appears and the pattern gains depth.

During operation, the trowel touches the plaster only with its flat surface, but not with its edges. After processing the first area, movement to the second begins.
If indoors low level humidity, then ironing is the last stage.

Waxing

Wax is applied only in rooms with high humidity. These are bathrooms or kitchens. Work is carried out after the plaster has completely dried. A wide spatula is used for this. A thin layer of wax is laid so that it does not peel off.

After an hour and a half, polishing begins. To do this, use a drill or grinder, onto which a soft nozzle is inserted. There should be no lint falling out of it. The speed is set to 3000 rpm. No more is needed because the wax will begin to wear off. Work is carried out until shine appears.

Final drying occurs after 1-2 weeks. After this, the walls can not only be wiped, but also washed.

Venetian plaster is an expensive type of coating. However, the quality and design are worth it. It seems that the walls are made of marble. You can carry out work yourself only if you have certain skills. To prevent marriage, it is better to entrust this process to specialists.

remboo.ru

Plaster trowel design - choosing the most convenient one

Professional and experienced builders, as well as people who are interested in repairs, know very well how important it is to choose the right equipment. After all, the accuracy of applying the material and the final result of the entire work also depend on the tool. The body of the plaster trowel has the shape of a trapezoid. The ideal length for this tool is 12-18 centimeters. Usually this device is made of high-quality stainless steel, which is absolutely insensitive to any building materials. But there are also plastic models, usually a trowel for decorative plaster.

The handle can be made of wood, or maybe metal. This doesn’t really matter, but it’s worth considering if you were going to start working in the cold season that the wood will feel much more pleasant in your hands. Geometric dimensions and the weight of the working tool - individual parameters. After all, the plasterer’s trowel will serve as an extension of the worker’s hand, which means it is selected based on personal preferences. When purchasing, you need to keep in mind that the work usually takes a long time, and the weight should be optimal so that the hand does not get tired.

In order for the trowel to serve for quite a long time, it needs to be organized with minimal proper care, we will mention this below. The principle of operation is very simple - you need to grab a part construction staff and spread it evenly over a flat surface. Properly selected equipment will really help you get the job done efficiently, quickly and easily, because the convenient shape of the handle and base allows you to take exactly the amount of compound that is needed.

How is a plaster trowel used?

The scope of application of a plaster trowel is quite easy to guess, but, most often, it is necessary to level plasterboard boards. In order for the structure to be reliably protected from influences external environment and has not been subsequently destroyed by moisture, all recesses between the joints must be removed. It will be more convenient to caulk the seams efficiently and quickly using a tool that has a small metal spout; this will allow you to do the work even in a very small space.

The work is organized as follows. If the surface that we plan to plaster is below the level of the box, install the container approximately one meter from the wall to be treated. We are recruiting required amount solution and pour it onto the surface. When performing this throw, not the entire arm is used, which is considered a mistake by the majority, but only the hand. To avoid a mistake, you need to swing and stop your hand abruptly. But it should be remembered that the swing should not be too strong, otherwise the solution may noticeably splash. The sharpness of movement directly depends on the thickness of the applied material, as well as the thickness of the layer.

If the solution needs to be applied in a very thin layer, then the swing of the tool should be as sharp as possible. If the layer should be thick, then the throw is not very powerful.

During the treatment of walls, the solution is applied in different positions from left to right, and then from right to left. This directly depends on the place where the composition is applied. If the material needs to be distributed above the level of the container, then it must be installed next to the wall. This will avoid unnecessary movements, and the solution that will fly off the wall will end up back in the box.

Plasterer's trowel for different types of finishing

In order for the work to be done as efficiently as possible, you need to know what types of plaster exist. Based on this, you can easily select a trowel.

• cement plaster

After complete drying, such a mixture necessarily shrinks slightly and reacts very sensitively to various temperature changes and air humidity. In order to prevent these unpleasant consequences, you need to properly prepare the solution, and then correctly apply it to the surface. That is why, before you start finishing work, carefully read the instructions on the packaging. And, based on all the instructions, prepare the mixture and choose a tool. A cement trowel is ideal for this type of work.

• gypsum plaster

The most convenient type of plaster, as it hardens and dries very quickly. But it cannot be used for rooms where air humidity exceeds 60%. In bathrooms, such a coating is used only if there is very good ventilation. To Work with gypsum plaster it needs to be done quickly, it hardens in a very short period of time.

• relief decorative plaster

Ideal for lovers of vintage style and imitation of various natural materials. Using this plaster you can create an imitation of stones or tree bark. You will need trowels for the job. various forms and sizes to create a complex pattern. For applying embossed decorative plaster Bark beetle you will need a special plastic trowel.

Trowel for Venetian plaster - the modern art of repair

Separately, I would like to highlight Venetian plaster, since today notes of art in interior design are very popular. This decorative look plaster is different from all the others. If the application technology has been followed, as a result you will get the effect of a chic three-dimensional pattern that goes deep, the texture resembles marble. Such plaster is created from the dust of various stones - quartz, malachite, marble. A Venetian plaster trowel is used for application and leveling. It is incredibly flexible, durable, and also has a comfortable ergonomic handle. In addition, such a trowel is perfectly smooth, which allows you not to leave any marks.

The choice of trowel for Venetian plaster should be treated with special care. It’s not enough to just buy a tool; you need to choose it exactly according to your hand. The most important thing: you don’t need to consider yourself an amateur; choose a trowel very carefully and meticulously. It is better to purchase several sizes at once. Yes, of course, you are new to this kind of work, and that is why the tool must be the best and most professional, and then you will not have any problems with Venetian plaster.

The trowel must be perfectly flat, made of stainless steel, polished to mirror shine and have a comfortable handle. The handle can be made of beech wood, as well as from a more modern material - rubberized plastic. Mirror polishing is necessary to ensure minimal adhesion of the solution. It is preferable that the trowel have rectangular shape, it is most convenient to work with it by tilting it at different angles. The edges should be slightly rounded, otherwise you will scratch the smooth surface.

When applying the solution, make sure that there is no plaster left on the instrument, since, after drying a little, it will leave scratches on the thin surface. To prevent this from happening, periodically wipe the blade with a wet cloth. The trowel is necessary for the formation of the main layers and for the uniform distribution of the solution. The strokes should be made with wide and chaotic movements, and then the surface will turn out perfectly flat and smooth. Often a round plastic trowel is also used to apply Venetian plaster.

remoskop.ru

Advantages and disadvantages of the material

Main advantages of this material are the following:

• "Glow effect" After drying, Venetian plaster reflects light well.
• Environmental friendliness. The substances used in the manufacture of Venetian plasters do not emit toxic compounds. The main component here is absolutely safe flour made from natural stone.
• Resistant to water. Thanks to this feature, the material can be used for finishing surfaces in bathrooms.
• Venetian plaster does not burn, does not support combustion and does not smolder.
• Possibility of tinting. During preparation, coloring pigments can be added to the mixture to obtain the desired shade of the surface.
• Long service life. The surface will retain its original color and texture for 25 years.

Venetian plaster – “Glow effect”

The main disadvantage is the high cost of the material. In addition, it is quite difficult to work with, and before applying Venetian plaster, the surface to be treated must be perfectly leveled.

Composition and features of plaster

Venetian plaster is made from 3 main ingredients: crushed natural stone(quartz, onyx, granite, marble), binder and color pigments. Previously, slaked lime was used as a binder, but now acrylic resins are increasingly being used instead. Synthetic or natural substances can be used to tint the composition.

This plaster can be laid on surfaces made of brick, concrete, natural stone or wood. Main feature The composition is its transparency, due to which the effect of highlighting surfaces is obtained. Even under the layer of translucent finishing are visible minor defects, so they need to be carefully hidden with starting plaster, putty or drywall.

Venetian plaster is very capricious, so the walls must be perfectly smooth

Types of material

There are 4 main types of Venetian plaster:

1. Veneto. Using this plaster, an imitation of polished marble is created. It is inexpensive, and working with it is not difficult when compared with other types of “Venetian”. The coating is also easy to care for: it can be washed with water and a sponge.
2. Trevignano. This type of plaster involves applying several layers (up to 12 pieces). Polymer compounds are used as binders. This coating is suitable for interiors in baroque, classic or vintage styles.
3. Marbello. Using this type you can create a matte finish with a small amount of glossy inclusions. The technology for applying Venetian plaster involves the use of multi-colored mixtures. Typically, polymer components are added to such compositions to increase water-repellent properties.
4. Encausto. After drying, the surface becomes granite-like in color and texture. The coating can be either semi-matte or glossy. After drying, it must be treated with wax.

Main types of Venetian plaster

How to choose a Venetian

Before purchasing Venetian plaster, it is important to decide what type of coating is planned. The material can imitate marble surfaces, malachite, onyx, quartz, pearl and so on. Some types of “Venetian” can imitate the texture of fabric, natural leather or wood. It is also important to decide whether you need a matte or glossy surface.

Venetian plaster: imitation of fabric, leather, stone, wood

Also, when choosing, you need to take into account the features of the interior and the purpose of the room where the work will be carried out. For example, it is better to decorate surfaces in bedrooms with pastel-colored materials. Dark or rich colors are suitable for living rooms. For children, it is recommended to use variegated mixtures. Also, before purchasing, it is better to clarify all the nuances that are associated with the operation, application of Venetian plaster and the features of caring for it.

Venetian plaster consumption

Calculating the consumption of this material is quite simple. First you need to calculate the total area of ​​​​all treated surfaces, and you need to round up. The layer thickness and material consumption per square meter are indicated by the manufacturer on the packaging. Provided that the layer of plaster recommended by the manufacturer is applied, the formula for calculating consumption is as follows: N = R x S x K, where N is the amount of material, R is the amount of material per square meter, S is the total surface area, K is the number of layers.

Required tools and materials

To finish surfaces with Venetian plaster you will need the following:

• plaster mixture;
• primer;
• wax;
• suede leather;
• putty;
• trowel for Venetian plaster;
• wide and narrow spatulas;
• sponges, rags;
• electric drill with mixer attachment;
• container for mixing the solution.

Preparation for finishing work

Preparatory work includes the following steps:

• The first step is to remove the old coating: paint, wallpaper, plaster, and so on. Then the surface is cleaned of oil stains, construction dust and other contaminants.
• All large cracks or potholes are repaired cement-sand mortar, and minor defects are corrected using putty.
• Protrusions are removed with a grinder with a diamond wheel, and roughness is removed with sandpaper with different degrees of grit.
• After this, the surfaces are treated with starting putty, and after it dries, they are finished with fine-grained finishing putty. Then the surface is treated with sandpaper.
• Next, the walls must be impregnated with a primer to increase surface adhesion. This procedure must be carried out twice at intervals of 3-4 hours. Sometimes a third layer is required, which is tinted to match the Venetian plaster.

How to prepare the solution

If the dry mixture was purchased in hardware store, then the manufacturer writes on the packaging about how to make Venetian plaster. Usually the mixture is poured out of the bag and diluted with water, only after that color is added, if necessary. For stirring, use an electric drill with a mixer attachment. The consistency of the finished mixture should resemble sour cream. After preparation, leave the composition for 10-15 minutes and then mix again.

Preparation of Venetian plaster solution

Something to remember! The air temperature during preparation of the mixture should not be lower than 10°C. One portion of the solution should be enough to treat the entire wall, otherwise the boundaries of materials from different batches will be clearly visible.

Now let’s talk about how to make Venetian plaster yourself. To do this, you need to mix flour from natural stone (marble, malachite, quartz, granite or others) with slaked lime in equal proportions. Then add a little soap to the mixture, then mix the ingredients as indicated above. At the end, color is added.

Basic rules when working with Venetian plaster

There are some rules for decorating walls with Venetian plaster. The technology for applying the material is as follows:

1. The first layer should be as thin as possible, but at the same time completely cover the entire treated area.
2. Subsequent layers are applied rubber spatulas arcuate movements to obtain the desired pattern.
3. Between applying layers it is necessary to pause for the material to dry.
4. The minimum number of layers is 4, the maximum is 12.
5. Each layer should be different in tone from the previous one. It is also acceptable to use mixtures of contrasting colors.
6. Finally, the surface must be treated with wax.
7. Depending on the characteristics of the material, it can set in 20-40 minutes, while you can touch the coating only 6 hours after completion of all work.

It should also be noted that Venetian plaster dries quite quickly, so it is not recommended to carry out work on the entire wall at once - it is better to limit it to an area of ​​1 square meter.

When applying Venetian plaster it is necessary to work with small sections of the wall

Material consumption largely depends on the number of layers, as well as the desired effect. Most manufacturers give an average figure of 0.5 kg per square meter. meter. Colors for plaster with stone chips also differ in some features: after drying, they can retain the shade, darken or lighten by several tones. Therefore, it is recommended to clarify all the details with the supplier or seller in advance.

Various material application techniques

There are different techniques for applying Venetian plaster. Let's consider only the most popular options.

Imitation marble

The mixture is scooped onto a spatula and applied to the wall with chaotic strokes, it is important to treat the entire area without gaps. Without waiting for the solution to dry, the surface is given texture using a trowel. After this, work is suspended for 2 hours. Now you need to prepare 2-4 types of solution, using different numbers of colors. They are collected in small portions onto a spatula or trowel, after which they are applied in long arched strokes. After treating the entire surface, it is left to dry for a day. If necessary, repeat the above procedure 2-3 times, with each layer requiring at least a day to dry. The dried surface is treated three times with a sander, changing attachments each time. At the end, the so-called “ironing” is carried out - processing with a trowel, during which the tool is pressed forcefully to the surface. The last procedure is waxing or varnishing.

Venetian plaster allows you to create a marbled pattern

Classic version

First, apply the first layer in the same way as in the case of imitation marble, after which it is left for two hours. Using a trowel, all excess material is removed, and then ironing is carried out until the surface acquires a metallic sheen. Then they prepare a single-color plaster with their own hands and apply it in a thin layer, after which they carry out the “ironing” again, but now it is enough to wait about 40 minutes. All subsequent layers (no more than 10) are applied using the same technology. After the coating has completely dried, it is treated grinder three different attachments, and at the end they are covered with wax or varnish.

Craquelure

Translated, this word means “antique”. The technology for applying Venetian plaster involves using a spatula, and the layer should be thick and the movements should be chaotic. Then turn on the hair dryer and heat the surface. Due to a sharp increase in temperature, the plaster will crack. Once the desired effect is achieved, the heat treatment is stopped and the coating is left to dry as usual for 24 hours. Next, a final thin layer of a different color is applied, and at the end there is standard three-stage sanding and “iron plating.”

Craquelure - artistic cracks or artificial aging effect

Cork tree

To achieve this effect, the first layer is made in different colors. Making this type of Venetian plaster with your own hands is quite simple. First you need to prepare 2-3 portions of a solution of different tones, then mix them, but not completely. The mixture is scooped onto a trowel or wide spatula and laid in a thick layer on the surface. In this case, applying the composition is not enough; you also need to dry the coating construction hairdryer. Keep the device at different distances from different sections of the wall to create a non-uniform texture. Characteristic cracks should appear on the surface. The coating is then left alone for 48 hours to allow it to dry. naturally. Next, apply a second layer of plaster of a different shade. Finally, the surface is treated with a grinding machine or sandpaper, and then waxed or varnished.

Before plastering with this type of “Venetian” plastering, you need to coat the wall with a penetrating primer, and after it dries, treat the surface with a covering primer. After 2 hours, the main work begins. To carry them out you will need a fur roller. With its help, Venetian plaster is stretched thin across the wall. even layer and left to dry. After 3-4 hours, when the material has set, it is necessary to “go” with a narrow metal spatula over the most protruding places and cut them off. To apply the next layer you will need a trowel. After completing the finishing work, you need to give the wall 6 hours to dry, after which all protruding fragments should be removed again. Venetian plaster is then mixed with a small amount of finishing varnish. To do this you will need a drill with a mixer attachment. After applying the composition to the wall, you need to wait 6 hours again. At the end, ironing is carried out with a trowel until a metallic sheen appears and wax is applied.

Textured Venetian plaster

Applying Venetian plaster is a rather complex undertaking that requires certain qualifications and experience in carrying out plastering work. Therefore, if you do not have confidence in your own abilities, it is better not to try to save money, but to immediately hire a team of specialists in this field, or at least get a master class on Venetian plaster.

Decorative at http://www.cdkderufa.ru. application decorative composition Tarbini trowel (space dust)

Used materials:

Tarbini - Decorative with sand "swirl" effect

Trowel for Venetian plaster - an indispensable assistant in finishing

So, the premises have been prepared for renovation, materials have been purchased, a plan has been outlined, and a grandiose one at that - all the walls (even in the toilet) will be covered with Venetian plaster. In general, repairs can begin. Oh? But what about the tool (you shouldn’t smear plaster on the walls with bare hands) - you will definitely need a trowel for Venetian plaster, preferably made of stainless steel.

Content

1. Trowel for Venetian plaster - selecting a tool
2. Spatula for Venetian plaster as an alternative to a narrow trowel
3. Venetian plaster tool - how to use it

1 Trowel for Venetian plaster - selecting a tool

It is not enough to purchase a tool for applying Venetian plaster; firstly, you need to select it according to your hand, and secondly, choose it correctly, so as not to swear through your teeth during the finishing work. First, we choose a trowel, and it is better to immediately purchase several different sizes of this tool. The first piece of advice when choosing is to not consider yourself an amateur and choose a tool meticulously. Yes, you are new to repair work and even more so in finishing with Venetian plaster, but that is why you must have the best tool; a professional can do the job even with a child’s shovel.

What should the trowel be like: perfectly smooth, polished to a mirror shine,with a comfortable handle. Polishing is necessary in order to minimize the adhesion of the plaster to the tool. Preferably rectangular trowel for Venetian plaster, it is more convenient to work with it by tilting it at different angles to the surface. At the same time, make sure that the edges of the trowel are rounded, so you will not scratch the surface that has been smoothed and primed for plaster. the chosen instrument will simplify your work and relieve your loved ones from the need to hear strong words in your performance.

2 Spatula for Venetian plaster as an alternative to a narrow trowel

Most experts recommend using trowels of different sizes for applying Venetian plaster to walls and nothing more. However, for some it is convenient to work with a trowel, for others not so much. Ideally, the trowel for Venetian plaster, which is used to apply the second layer and subsequent ones, should be up to 5 centimeters wide, also with rounded edges and must be made of wear-resistant steel, preferably stainless. But, in fact, you just need a narrow tool to work even in hard-to-reach places, so the trowel can be replaced with a small spatula.

The principle of applying Venetian plaster to a wall is similar to finishing surfaces with putty. That is why those who have already putty will find it easy to use a spatula for Venetian plaster. Of course, this tool, like the trowel, must be carefully selected according to the hand. There are a considerable number of varieties of spatulas - plastic, rubber, but you only need a steel one that is quite flexible and, at the same time, wear-resistant, made of stainless steel with impeccable polishing.

3 Venetian plaster tool - how to use it

Well, now it’s time to start decorating the walls. There are materials and tools too. We have already figured out what the tool for Venetian plaster should be, all that remains is to combine it with the materials and figure out how to use the trowel and spatula correctly.

In essence, nothing complicated, although many professionals claim the opposite. Use a wide trowel a small amount of plaster, ready-made colored or with a color diluted in it, and for the first layer we begin actively, with wide arching movements on the wall. In other words, we putty the wall again, only this time with Venetian plaster. Angle between trowel and wall surface must be extremely sharp, so you won’t scrape with the soil.

The next tool for Venetian plaster, which takes over from the trowel, is a spatula. Although no, two identical narrow (no wider than 5 centimeters) spatulas. Why two? With one you will apply small lumps of plaster to the wall, carefully pressing and smearing, and with the second you will need to compact the already thin plaster even more.

And so on in small strokes, chaotically overlapping each other, section by section, until the entire wall is covered with spots with softly flowing tones from dark to light (and vice versa). This will be Venetian plaster in all its glory, ready for sanding and waxing.

Video of applying decorative plaster with a trowel

Video technology for applying plaster with a trowel

Photos of various trowel tools, jxexp.com

Tools for decorative plaster, choosing the optimal set

Any application procedure finishing coating must begin with surface preparation. Therefore, considering this stage of work as an integral part of the entire process of creating a decorative coating, one cannot fail to mention the plastering tools used in such work. It is necessary to remove old coating, falling off pieces or bricks from the surface, clean cracks from debris, level the walls and repair uneven areas. Below are some of the tools used in this:

• special hammer;
• ladle for applying plaster;
• construction plumb line;
• building level;
• rule for plaster;
• spatulas;
• Master OK.

Plastering tool

Finishing using decorative materials requires careful compliance with all prescribed operations and the performance of a wide variety of work. Therefore, a tool for applying decorative plaster is needed not only to be particularly specific, but of high quality and combining the possibility of using it to perform various tasks.

One of them is a trowel made of stainless steel, a photo of which can be seen below:

Trowel for applying Venetian plaster

With its help, decorative plaster is applied and leveled, and other operations related to obtaining relief on the surface can also be performed. The shape of the trowel may differ from that shown in the picture.

Other equally important tools are a variety of plaster spatulas, used for applying and leveling the material.

Different spatulas - the main tool for plastering walls

When applying Venetian plaster, a slightly modified version is used - a spatula for Venetian plaster, which is a metal spatula polished on both sides. A similar spatula can be seen in the photo below.

As for the “Venetian”, which is distinguished by a complex application technology, the tool for Venetian plaster is used the same as those listed above. Additionally, surface polishing materials may be needed.

To better understand what tools are needed for decorative plaster, the easiest way is to remember the technology for applying it. So, when applying bark beetle plaster, a grater is used to create a pattern, moved in a certain way along the surface of the applied plaster. One of the options for such a grater is given below, although it can be made in a different way; different manufacturing companies have their own versions of such products.

Grater - a tool for applying bark beetle plaster

It is impossible not to mention the method of applying plaster with a roller. In this case, the roller acts as a multifunctional tool - it is used in a variety of operations, starting from walls, and later as a tool for plastering walls.

Pattern Tool

Often, to get decorative surface, no special types of plaster, such as Venetian, are needed. After applying the material to the walls, decorative plaster rollers are used to create on the surface. For example, a roller similar to the one shown in the photo below.

The process of applying plaster with a roller

The design of the tool usually involves changing the roller. Thanks to this, the embossed plaster roller can be used with a different pattern, for example the one shown below:

Another distinctive feature A similar tool for decorative plaster is the possibility of its modernization even without the use of replaceable rollers. For example, you can wrap the surface of the roller with rope or tape, in which case a relief pattern will be obtained.

A similar effect can be achieved by placing a roller on the surface of the roller. plastic film, which will ensure an original pattern due to the fact that the film will form folds in a completely unpredictable way. Rollers for textured plaster, created in this way are shown below:

In addition to creating a relief image original drawing on the surface it is obtained in other ways. Plaster stencils will be indispensable assistants. There are a huge number of them, and they allow you to get a wide variety of images on the surface. Examples of some stencils are given below:

Tool for mechanization of work

When performing decorative surface finishing, you often have to carry out large amounts of work, especially when finishing the external surfaces of a building. And if at the same time a relief pattern is created, for example, using the spraying method, then a gun for applying plaster will become an indispensable assistant.

It operates on the principle of an airbrush; air from the compressor is supplied to the handle, on which a container for plaster is installed on top. Passing through the nozzle, the air captures the plaster and it falls on the walls. The consistency of the material is the same as during normal work, the main condition is that it slides freely down the walls of the funnel.

During the work process, you constantly need to update the mixture in the funnel, cleaning and removing the old one. Otherwise, it freezes and it becomes impossible to work. A plastering gun speeds up the work of applying it, but this does not mean that holding such a tool in your hands is not difficult. It must be taken into account that to work with it you need a compressor that creates a pressure of three to four atmospheres. The use of such a tool allows you to reduce the time of applying the material to the surface.

Trowel for Venetian plaster - how to choose the perfect tool

Trowel for Venetian plaster- the main tool that is specially adapted to work with this unique finishing for walls. But for correct execution All work on applying this type of decorative coating will require some more tools.

Tool for Venetian plaster - what is needed for the job?

The right tool will allow even a novice craftsman to count on the results of his work. First of all, it is important to choose a trowel, but do not forget that you will also need a spatula for Venetian plaster, and more than one.

Spatulas should be prepared wide and narrow, although some craftsmen use two narrow spatulas simultaneously when working with last layer, which will form appearance wall covering.

If, after applying the Venetian, waxing is required, as in some other types of plastering work, for example, when finishing walls Moroccan plaster, then you will need a wax spatula, as well as a suede mitten or woolen rag to create a glossy surface.

Is the right tool the key to success?

You need to choose a tool carefully, especially if you are new to repair work. The trowel, designed for applying base layers of Venetian, has some characteristic features:

• Shape - rectangular;
• material - stainless steel;
• increased wear resistance;
• rounded edges to avoid leaving scratches on the surface of the plaster;
• mirror polish work surface so that the wall covering mixture does not stick to the tool;
• ergonomic handle, the shape of which takes into account the peculiarities of the master’s movements when applying plaster to the wall, because the work will take a long time.

The material used to make the handle is either beech wood or a more modern material: rubberized plastic. Quite often, rubberized handles are produced in two components for greater ease of use of the tool.

Spatulas should also be made of stainless steel so that after they compact the layers of plaster, there are no characteristic dark marks left that can ruin the entire work. Special spatulas for Venetian plaster are distinguished by double-sided mirror polishing and an extra-flexible blade.

Features of using tools for the Venetian?

Not a single tool, even the most convenient and professional, will lead to high quality work if used incorrectly. Those craftsmen who have at least initial experience working with ordinary or moisture-resistant plaster will be able to master the techniques of applying Venetian plaster without much difficulty:

• Apply the solution to the trowel using a spatula;
• To distribute the plaster on the wall, move the trowel with slight pressure, holding it at an angle of approximately 30 degrees;
• movements with spatulas are performed in accordance with the desired pattern.

Tool for applying decorative and Venetian plaster, pavan tool, tool for Venetian plaster, decorative Venetian trowel, trowel.

Name vendor code Size Price Rubber trowel. 15 mm. Wooden handle 819 /1 215X135 RUR 340.00 Corner trowel for moistening the top layer 819/5 350X70x40 RUR 663.00 Rubber trowel. Thickness 20 mm. Wooden handle 820/1 215X135 RUB 374.00 Trowel with sponge 30 mm. 875 250X130 289.00 rub. Trowel with sponge 30 mm. 875 290X150 408.00 rub. Rubber trowel. Thickness 15 mm. base 877 215X135 340.00 rub. Rubber trowel. Thickness 15 mm. Polyurethane base 878/1 215X135 RUB 408.00 Corner trowel for moistening the top layer 879 350x70x40 612.00 rub. Professional trowel for applying the substrate 811 450X110 1020.00 rub. Transparent plastic trowel with rounded corners. Plastic handle 817/PV TRASP 240x100 RUR 306.00 Plastic trowel for texture paints. Thickness 2 mm. 817/RS 280X130 680.00 rub. Transparent plastic trowel with rounded corners. Handle Sintesi 817/RS1 TRASP 240x100 RUR 510.00 Stainless steel spatula for Venetian plaster 501/IS 40 RUR 340.00 Stainless steel spatula for Venetian plaster 501/IS 80 408.00 rub. Stainless steel spatula for Venetian plaster 501/IS 100 RUR 442.00 Stainless steel spatula for Venetian plaster 504/IS 100 RUR 442.00 Stainless steel spatula for Venetian plaster 504/IS 120 RUR 578.00 Stainless steel spatula for Venetian plaster 504/IS 150 646.00 rub. Trowel for Venetian plaster. Sintesi handle. 824/I 200x80x0.5 1360.00 rub. Trowel for Venetian plaster. Sintesi handle. 824/I 200x100x0.5 1360.00 rub. Trowel for Venetian plaster. Sintesi handle. 824/I 240x100x0.5 1462.00 rub. Trowel for Venetian plaster. Wooden handle. 825/I 200X80 816.00 rub. Trowel for Venetian plaster. Wooden handle. 825/I 240X100 918.00 rub. Trowel for Venetian plaster. Handle ECCELSA PLUS 844/I 200x80x0.5 RUB 1,496.00 Trowel for Venetian plaster. Handle ECCELSA PLUS 844/I 200x100x0.5 RUB 1,496.00 Trowel for Venetian plaster. Handle ECCELSA PLUS 844/I 240x100x0.5 RUB 1,530.00 Suitcase of tools for Venetian plaster 1940 420x510x260 RUR 18,700.00