When planning the construction of a path in the garden, you need to weigh the pros and cons when choosing materials. Each type has its own advantages and disadvantages. The choice is determined by the purpose, size and appearance. These characteristics must correspond to ease of movement and decorativeness of the garden. In this article we will tell you how to do it garden path from tires, let's look at the step-by-step instructions.
Advantages and disadvantages of tire tracks compared to other materials
The functionality of the paths always comes first, according to which they are divided into driveways and parking lots, as well as pedestrian ones. The following are suitable as coverings for all types of paths:
- Paving slabs, which is otherwise called FEM (curly paving elements),
- Brick,
- Cement.
For pedestrian use only:
- Sand,
- stone chips,
- Wooden cuts,
- Boards. Read also the article: → "".
Each of the materials has certain characteristics.
| Name | Advantage | Flaws | |
| Paving slabs | Durable and durable material for all types of paths and platforms. Easy to install. Differs in a variety of shapes and colors. | Slippery after rain and snow. | |
| Brick | More wear-resistant than paving slabs. | One type of shape is a block. Color limited. Only moisture-resistant, fire-resistant, clinker materials are suitable for paths. | |
|
|||
| Cement | It is used as a covering in the form of concrete. Suitable for all paths and areas. Installation does not require special qualifications. | Slippery after rain. Color is limited, the most commonly used is gray, which is determined by cement. If desired, you can add pigment color, which is used in the production of paving slabs. |
|
| Sand | Suitable only for summer walking paths. | In winter, sand paths cannot be cleared of snow, so they are used only in the warm season. They require careful compaction during installation and constant moisture during care. | |
| Stone chips (fine gravel, crushed stone and screenings) |
It is used for seasonal paths in the same way as sand. Absorbs moisture well. | Can't clear the snow. | |
| Wooden cuts | Must be at least 25 cm in length. Placed only in walking paths. | Before laying, you need to remove the bark and treat each cut with an antiseptic on all sides. It slips after rain and is difficult to remove snow from. | |
| Boards | Pedestrian paths are often constructed from them, although driveways can also be constructed from durable species - oak, larch, pear. | Slipping after the rain. | |
In addition to the listed materials, resourceful craftsmen adapted old car tires for the construction of paths. The undeniable advantage is cost, or rather, its complete absence. Costs are calculated only for delivery.
- Automotive rubber is a high-strength material that is resistant to any weather conditions.
- They don't slip even in wet. Snow does not stick to tires.
- Dry quickly after rain.
What are the differences between driveway and walkway sizes?
Parking lots are calculated based on the size of the car. The starting point is its width, plus 50 cm on each side for the doors to open freely. It is important to take into account the features of driving and turning. Taking into account all the features, it turns out that the width of the access road should be at least 3 m.
Pedestrian paths along functional purpose divided into transit and pleasure.
- "Transit" serve for functional movement. As a rule, they lead from the gate to the house or connect buildings in the yard. For example, they run from home to summer kitchen or a bathhouse. The width of such paths is calculated for two pedestrians walking next to or towards each other.
- Walking paths resemble paths due to their size. A width of 40–50 cm is sufficient for them. Just the diameter of a passenger car tire.
A path made from cut tires can be laid between the beds. Then you can walk in the garden even after heavy rain. Tire laying schemes, where it is better to use each of them
For the construction of tracks from whole tires, there are not many laying options.
- Lay the tires horizontally.
- Install on the “edge”, tightly adjacent to each other.
- Figured paving in the form of a herringbone.
Which method to choose depends on the scale of track construction, the size of tires and their number.
Each construction method has advantages and disadvantages. For example, it is easier to cover flat tires with reinforcing material. The vertical device is problematic in bedding. To thoroughly strengthen the tires, you need to fill the empty spaces between the walls before installation. There is an opinion that it is best to fill it with concrete, which increases wear resistance and stability. It is better to do this directly at the installation site.
Tires laid vertically create a slope for free flow of water. From car tires You can build not only a flat path, but also build steps.
If you are armed with a Grinder, you can cut neat strips from tires to form a track-like covering from them.
Step-by-step instructions for constructing a track from car tires
In addition to the fact that tires can simply be placed as a whole, original version in the form of cut ribbons it looks much more impressive. In this case, rubber replaces the hard surface. The work is performed in the following sequence:
Step 1. Prepare “building material”. To do this, use a grinder to cut off the sidewalls of the tire. The result is a ring that is formed into a ribbon.
If the track small size You can prepare the strips using a sharp knife. Step 2. When required quantity material has been prepared, we begin to prepare the base for the path. Using pegs and twine, mark the length and width of the path. Within the designated area, carefully level and compact the soil.
Step 3. Pegs are driven in along the edges of the path on both sides and transverse wooden crossbars are secured to them. The distance between them is equal to the length of the tire strips. Several rows can be laid in this way.
A rubber coating is nailed to the crossbars. The following tapes are overlapped. Comparative analysis of tire types
Ideally, for the construction of the path, it was possible to select tires of the same size. Otherwise, they will definitely have to be cut. Tire sizes depend on their purpose:
- For passenger cars,
- For trucks.
In the second option, fewer tires will be needed, but they will be more difficult to handle due to their greater weight. In addition to the dimensions, “winter tires” are preferable for the construction of paths, that is, tires designed for low temperatures. This will ensure a longer service life. In addition, the wear resistance of the coating increases. In this case, you can even use it for driveways and parking lots, provided proper preparation grounds. It is formed in the same way as for any other coating. The depth of the trough must be at least 50 cm.
All types of car tires are suitable for pedestrian paths.
| Type | Characteristic | Recommendations |
| Summer | “Road” is the most common type. They do not attract dust and water, but snow easily sticks to them. It is better to use for constructing walking paths or paths in the garden |
Used at positive temperatures + 5 0 and above. |
| “Universal” – cope with dirt and water better than road ones. | Suitable for paths of any season. | |
| “Mud” - have the deepest tread, so they are uncomfortable for walking. They are best used for parking lots. | Ideal for regions with rainy climates |
What can borders be made from?
If the number of tires allows, then best material you can't think of a way to decorate the edges. In this case, the base coating is guaranteed to match the finish. There are three ways to install a border:
- Bury whole tires vertically. This finish can be installed not only along the tire track, but also with other materials.
- Cut crosswise into two equal parts (using a grinder).
- Form ribbons.
Tip #2.Note! Tires can be cut into strips with a knife, but the cross-section must be made using a special tool - metal scissors, a jigsaw or a grinder. A regular knife will not cut the metal rods along the tire rim.
The curb can be fastened with plates and bolts. Other materials will also work.
- If small sized logs were used for support, they can make an excellent finish.
- For decoration, saw cuts with a diameter of 8–15 cm, which were not useful for paving the path, are suitable. Before burying them in the ground, the posts must be freed from the bark and treated with an antiseptic, for example, Pinotex.
Category: “Questions and answers”
Question No. 1. Is it possible to build a tire path on clay soils?
Only with preliminary preparation. Natural clay soils They are called floating, due to the fact that they cannot be compacted, they spread apart. Therefore, to build a path, you need to prepare a full-fledged trough. This is a ditch, 25-30 cm deep. A layer of crushed stone and sand is poured onto the bottom. Each material is carefully compacted and only after that the tires are laid flat.
Question No. 2. How important is the type of tire for paving driveways?
It depends on the purpose of the track. Any type will be suitable for pedestrian areas, but for vehicle areas it is better to use truck tires. They are stronger and more durable. The deep tread guarantees reliable (without slipping) contact of the car wheels with the coating. Moreover, in any weather, even in rain, even in snow.
Question #3. Is it possible to concrete a covering made from tires?
Undoubtedly! This combination will increase the strength and durability of the path and save costs on cement, sand and crushed stone.
Serious mistakes gardeners make when creating tire paths
Mistake #1. Laying tires on the path without leveling and compacting the soil.
At first glance, the surface of the earth may seem flat. But if the form is not prepared correctly after the construction of the path, all errors will appear very soon. The path will sag and warp in unstable places.
Tire recycling is a global problem. In our country, they are mainly burned, producing deadly poisonous smoke. The trouble is that not only when burning, but also when heated from ultraviolet radiation, tires evaporate harmful substances. That is why it is better to cover them with cement or paint them with special protective compounds that tolerate differences in high and low temperatures.
Recently, my aunt was introduced to my niece’s blog; as a summer resident, she was interested in the “Ideas for a Summer House” section. An order has been received for good idea for garden paths. That's what I like country house construction and renovation, it provides space for activity, and not only in the spatial sense, but also in terms of the implementation of the most unexpected ideas.
So, let's go back to our sheep tracks. There are a great many options, one more beautiful than the other. Wood will always be paramount for me when faced with a choice. Still, a living material, breathable, warm.
Paths consisting of different segments connected together also look very nice, especially when one of the segments is greenery in one form or another.
A mosaic of painted pebbles sealed in concrete refers, in my understanding, to artistic creativity. You create a canvas using an unusual technique.
And there is this very simple one a budget option, you put together puzzles from rubber modules, I like the fact that they can always be rearranged, you never know, plans have changed, space will be needed. It's just a minute. Although, of course, it looks more like a temporary measure. In the end, all summer residents and owners of personal plots go through a state of temporaryity, so it will come in handy on the farm.
On the website neumaticoadicto.blogspot.com.es the author went further, he makes rubber tracks from old tires, what about tracks, toys, jewelry, furniture, shoes... in general, when all the dacha affairs will be in order (if at all really) you can equip yourself a workshop and create there, even if only from old tires. Like this:
And from the sidewalls you can build a flowerbed like this and walk around in flip-flops with tire soles.
This no longer has anything to do with the paths, but it has everything to do with the dacha.
Planning the location of linear objects and determining the optimal option. Get advice on the topic of planning a linear facility and order development project documentation in the INTERPROJECT company can be found on the company’s website www.interproject.ru.
To make your summer cottage special, it is not necessary to have extensive design and construction experience. There are many simple options for independent creativity, for example, garden paths from tires. This waste material will acquire new life after restoration, and the technology for laying paths is elementary in execution, so creating them with your own hands using instructions with photos will be as easy as shelling pears.
Advantages and disadvantages of tire tracks
Many owners country houses They prefer to improve the territory themselves. In particular, this applies to travel routes and parking lots. The ideal material for their creation would be tires that are subject to recycling.
Waste tires become acceptable material for garden paths
Similar option does not require special financial costs. But there are others positive points use of tires:
- availability;
- increased resistance to the negative effects of external factors (precipitation, high and low temperatures);
- wear resistance;
- durability (does not require annual dismantling).
Rubber does not absorb moisture (even after heavy rain it dries instantly) and
It is impossible to slip on it. It is easy to care for rubber tracks - just walk over them with a broom or spray them with water from a hose. Well, the most significant plus is the ease of installation.
Along with this, there are also disadvantages:
- the need for a large number of tires (even for a small path in the garden you will need several dozen tires);
- unesthetic appearance;
- low plasticity of rubber;
- the need to create a base of gravel, otherwise the rubber track will fall into the ground.
If you don’t have unnecessary tires in your garage, you can go to the nearest tire shop or ask your car enthusiast friends.
Options for tire tracks
To build paths in the country, you can use both tires with and without disks (in the form of cut strips or tiles). In the first case, laying is carried out flat or edgewise. If the terrain is uneven, then whole tires will make comfortable staircase. Moreover, its form can be any.
In order to make even flooring for movement, rubber is taken from tires with uniform wear. It is recommended to take wheels from trucks, since they are larger and the paths will be wider.
Curbs are also made from the side of the tires.
Photo: design ideas for paths
Tires are laid in the form of a ladder, which is convenient for dachas on a hill 
It is convenient to move along the path made of tires, as it does not slip 
Rubber from tires can be used to make a convenient access road 
The material is cut not in the form of strips, but in tiles 
In places where water accumulates after rain, you can make a bridge from tires 
The simplest option for a garden path is to cut a ribbon from a tire
Preparatory activities
Before you start laying out trails, you should plan the scope of work. It is better to sketch on paper a diagram with all the elements that complement the path:
- curbs;
- gutters;
- drainage systems;
- lanterns.
Be sure to measure the tires in order to determine the required quantity. And this will depend on the length of the path, its shape and route.
Choosing tires for garden paths
Any tires are suitable for constructing travel routes in the garden. If you want to make the paths wider, it is better to choose truck tires. If you plan to install whole tires, then select them same size. For belt type You can take material of different sizes, but you still have to cut it.
Tires of the same size should be selected for the track.
It is preferable to choose “winter tires” since they are designed for low temperatures. Such tracks will last longer.
Preparation of necessary materials and tools
Prepare the tool for work in advance:
- sharp knife or jigsaw;
- shovel;
- hammer;
- hacksaw;
- roulette;
- pencil or marker;
- axe;
- nails (from 7 cm long);
- wooden pegs.
The only material needed is old tires.
The tire must be prepared first
How to make a tire track with your own hands
Choose the type of garden path from car tires depending on your abilities and preferences. Let's consider technological process each option.
Tape
Depending on the width of the path, 2-4 canvases may be needed. Nail the tapes to wooden boards, leaving gaps of 1.5–2 cm and laid on the ground.
Over time, grass will grow into the gaps left and will keep the flooring from shifting.
It is first recommended to make a base of gravel, which will serve as drainage. To prevent the path from rising, the path for laying it is slightly deepened. This option is suitable for designing passages between beds or plantings.
Stepped
No less interesting way- creating a ladder from whole tires. This is especially true for dachas located on uneven terrain. The main thing is to securely fix the tires so that when people move on them, there is no risk of falling. You can make a staircase in one or two rows.
The descent or ascent can be made from tires
Installation is carried out as follows:
- Lay out the tires on the ground. Begin laying out from the bottom tier, gradually moving upward. After installation, each tire is carefully checked for reliability. For greater stability, it is advisable to slightly drown it in the ground.
- Sand (earth) is poured inside the tires and compacted.
- Sprinkle the finished path with gravel to prevent slipping on it in wet weather.
From rubber plates
Paths in the garden can be made from rubber slabs. These are square or rectangular pieces cut from the same rubber from tires.
Tire rubber can be cut into tiles
They are attached to a base prepared by mixing acetone and polyurethane glue. It is important to maintain proportionality when laying slabs. The same indentation should be made between the workpieces. It will look beautiful if the gaps between the tiles are filled with colored pebbles and the coating itself is painted.
Video: how to make tiles from tires
Construction of borders
The installation of the path is completed by erecting a curb made of rubber from tires. This is done not only for the sake of decoration, but also to firmly fix the flooring.
You can decorate the edges of the garden path in different ways:
- bury the tires entirely in a vertical position;
- cut rubber bands and fasten them with nails, bolts or metal staples;
- cut the tire in half and bury the resulting arcs in the ground.
To decorate the edges of the path, it is better to use truck tires
It is recommended to use imported tires, as they have softer rubber and are easy to cut with a knife. And in order to make a cross-section you need a more serious tool - metal scissors or a jigsaw.
To decorate the edge of the path, you can use the bars remaining after paving. They will also serve as a support.
Decoration
To increase the resistance of rubber to moisture, temperature changes and ultraviolet radiation, painting is recommended. When choosing paint, preference should be given to those marked KCH-136 (intended for rubber). This paint absorbs up to 97% sun rays and creates the maximum smooth surface. Once applied, it dries within a few hours.
If painting is done at a temperature of +25 °C, the garden path can be used within 2 days.
Mistakes when creating tracks from tires
In order for the path on your personal plot to last for more than one year, you should listen to some tips:
- Do not lay out tires without first leveling and compacting the soil. Even with the apparent levelness of the ground, in the future there is a high probability of subsidence and deformation of the sidewalk.
- You can't count tires absolutely harmless material. When exposed to strong heat in the sun, it can release harmful substances. Therefore, it is recommended to cover tire tracks with protective agents.
Video: a clear example of creating a garden path from old tires
As practice shows, from any unnecessary products you can do something worthwhile. This also applies to car tires. Using them as building material for garden paths allows you to save a considerable amount and improve the area for practically nothing.
Almost any summer cottage allows you to realize the most various ideas. So, you can use convenient paths made from old tires as decorative elements. There is no need to rush to throw away things that have become unnecessary; you can restore these items and bring something new and original.
An example of a garden path made from tires
DIY tracks made from old car tires will be a unique addition for anyone. Moreover, their use can be completely diverse. From car tires you can make an original frame for the following various garden elements:
- or flower beds;
It should be noted that most owners of country houses will be very willing to build garden paths from car tires, due to the fact that this method is not overly labor-intensive and costs virtually no large financial investments. By the way, to independently improve garden paths you will need to use not the entire surface of old tires, but only a certain part of it - treadmill, the so-called protector.
Garden paths made from cut tires To make your own such high-quality decorative element Absolutely any old tires will do in your garden, but it is best to use those left over from trucks. Their use will significantly increase the width of the future convenient garden path, but at the same time you will need much less tires than if you used car tires from passenger vehicles.
Moreover, this will in no way affect the quality of the future path, but it will allow you to reduce the time spent on the external improvement of your site. There are several reasons why it is recommended to use rubber from old car tires:
Manufacturing process
It should be clarified that all required material for such a track it will be absolutely easy to obtain.
The easiest way to do this is step by step:
After you have built such a garden path with your own hands, it will be advisable to walk along it several times, which will allow you to better press the boards with ribbons into upper layer soil. In order for the coating to lie well, the ground underneath must first be leveled.
For this purpose, you will need to carefully remove a small top layer of earth, and fill the resulting area with fine gravel or pour regular concrete. When the blank for such a path is completely ready, you can spread the rubber coating you made for the garden on it. When laying rubber bands from car tires, it is not at all necessary to lay them directly on the ground layer.
We nail the rubber onto a special board Using ordinary nails, they can be carefully nailed to wooden beam or boards, and only then carefully lay them out on the garden path.
Moreover, if you do not place the car tires close to each other, but leave a small gap of 1-2 cm wide between them, then new grass will soon grow through such cracks.
This will look very nice and will also prevent the rubber bands from car tires from moving to any side in the future. If you do not have your own truck, then the tires necessary for the garden path can be purchased absolutely free. For example, qualified technicians from all kinds of tire shops will most likely be only happy if you help them get rid of unnecessary material.
The use of decorative paths from tires
In addition to the above-mentioned areas for using such tapes from car tires, it would also be advisable to use them in the following places in a suburban area:
- Personal parking road transport on the territory of a personal plot;
- Path at the entrance or entrance to your yard;
- A place used for washing cars, bicycles or scooters;
- A utility yard with various buildings, the passages between which can be lined with similar high-quality decorative paths made from car tires.
Similar coverage on site country house, built with your own hands, will not only look very harmonious in natural design, but also distinguished by its special practicality during operation.
Option for constructing a garden path from tires In addition, this coating itself is absolutely non-slippery, which makes the chosen solution more than rational, especially if your family has small children or elderly people. In the spring, when the snow melts or at any other stormy time of year with heavy rainfall atmospheric precipitation Often there are certain problems with access to a summer cottage. This problem can also be solved by using rubber bands.
It is necessary to spread them on the most problem areas and any car can drive through them completely unhindered.
It is also worth noting that it will not be superfluous to carry with you a small amount of similar tapes in the trunk of your car. They can always be useful to you in case of the most unforeseen circumstances, allowing you to get rid of unnecessary manipulations with a shovel and the need to place boards under the wheels if your car cannot drive off-road. 
Such interaction of rubber with rubber will ensure almost caterpillar cross-country ability of vehicles. Another, less known, but rather eccentric use for old car tires is to use them as country buildings. Since this material can be given a semi-cylindrical shape, just like tiles, it can be laid in a completely similar way.
Naturally, for the main country cottage this option is not suitable, but, say, or this is more than profitable solution, because with the help of old car tires you can build with your own hands an almost eternal water-repellent roof that can withstand any bad weather.
This is what a cottage roof made from car tires looks like If the decision to create such a decorative element from car tires is on your summer cottage already accepted, you can choose from two possible options:
- Use rubber bands from tires (the method for obtaining them is described above);
- Apply rubber tiles, which, in essence, are recycled tires.
Both of these options are equivalent in their execution. Rubber belts from car tires and rubber tiles have exactly the same characteristics and similar durability.
When answering the question of how best to organize the approach to a house on a slope, most experts recommend terracing the site using gabions. If you have a limited budget, another option is possible - a do-it-yourself tire track.
This is the most original way arrangement local area. Unlike wood, rubber is more resistant to temperature changes and moisture. Its other advantages include an anti-slip coating, as well as shock absorption when moving, making it more convenient to climb slopes.
Old truck tires can be turned out and painted. In terms of dimensional stability, they are not much inferior to new tires. Therefore, if you are looking for raw materials for garden paths at reasonable prices, or even free, best option can not found. In the construction of low fences that delimit several zones at once in a dacha, such coatings are used decorative functions. Returning to practical problems, the first thing to note is:
- frost resistance;
- hydrophobicity;
- softening impacts when falling;
- easy maintenance, including the possibility of minor repairs;
- no significant costs during installation.
When choosing car tires, it is important to be guided by physical properties products. For example, summer tires, thanks to their hard rubber, can withstand 40-degree heat and grip any surface. Longitudinal grooves on the tread promote high-quality drainage, thanks to which even the simplest paths last for years. For decoration, winter tires with large lamellas are more suitable. It dries faster, and in the cold, unlike concrete and wooden coverings, almost does not slip.
Video “Garden paths from old car tires”
From this video you will learn how to make a garden path with your own hands from old car tires.
Options
If the raw materials are properly treated with oily liquids, large tires can be easily cut by hand. A sharp knife, a hammer, chalk and power tools for cutting hard products will be useful. The easiest way is to make a ladder path from 40-50 tires. It is convenient to go down to the pond, gazebo and summer outbuilding. And if the building is located on a hill, this is almost the only way to get to the transport stop.
The manufacturing process involves the following steps:
- Place clean tires on the ground from bottom to top.
- Compact the base of the path with a vibrating plate, and if necessary, dig a 2-centimeter trench for each element of the path.
- Fill the holes with broken bricks or pebbles to prevent the structure from collapsing in the wind.
- Install handrails for safe movement with children.
An equally durable path can be laid out from rubber modules. They easily change direction and connect to each other like puzzles. Long paths leading to garages and outbuildings, it is better to make it from square tiles. The material is easily repairable, does not slip and does not deteriorate under mechanical loads.
From whole tires
If there is a children's playground on the site, it is not necessary to cut the tires. From whole products it is possible to make a winding staircase leading to a hill or to a horizontal bar. Depending on the size of the area for fencing, you will need from 40 to 60 old tires, which can later be given green, orange or red shades. Small structural elements are laid out on top, and the largest ones are laid out at the bottom of the stairs.
IN winter period they never become covered with ice, and in summer they are easily cleaned of debris. They dry quickly after rain, allowing for safe outdoor activities. Products can be laid horizontally or vertically. Moreover, in the first case, the holes are easily filled with soil, and in the second, it is possible to organize high-quality drainage.
From tapes
First of all, it is necessary to take correct measurements and process the products. To make the tire straighten faster, the power tool is directed along the edge, and only then the tire itself is cut. The finished strips should be nailed to pine planks and laid on clean soil. Optimal distance between coating elements - 1 mm. The gap is needed for complete drainage of rain and melt water.
Before laying tapes on the site, it is important to arrange drainage. Gravel is best suited for this purpose. And so that the path does not climb up, small grooves are made at the place where the bars are installed.
Curbs
Such structures protect paths from the growth of weeds, and the roadbed from erosion. With their help, you can not only decorate the area near the house, but also mark the boundaries of the most beautiful places Location on. The maximum project budget is 700 rubles. This is 5-7 times cheaper than installing metal and plastic tapes. Tires can be laid vertically, and for better fixation of the products, you should use cement mortar.
The cut tires will be used to create dense ribbons that delimit the public and private areas of spacious areas. Most often, such fences are fastened with bolts and plates. The supporting elements will need logs. To prevent wood from deteriorating due to bad weather, it should be impregnated with an antifungal compound before use. As decoration, you can use larch cuts with a diameter of 10 cm.
Decor
Painted surfaces increase the resistance of products to moisture, frost and ultraviolet radiation. When choosing such compositions, it is more logical to give preference to paints marked KCH-136, intended for processing rubber. They absorb up to 97% of sunlight and provide a perfectly smooth surface of painted parts. Thanks to unique property Thixotropy allows for independent leveling of coatings, and most importantly, thickening of paints at rest.
Complete drying of the layer occurs after a few hours. If you work at a temperature of +25 °C, the path can be used in 2-3 days. The remaining tires will serve as the basis for the production of rubber tiles using the hot pressing method. These coatings are convenient to use not only outdoors, but also in residential areas.
