How to install blinds on double-glazed windows. How to attach blinds to plastic windows - possible options. We hang aluminum curtains and blinds on sliding windows

If you have bought or ordered vertical or horizontal blinds, then we suggest that you install them yourself, because you can cope with this task even without experience, the main thing is to have the desire, 1 hour of free time and several tools.

Attention! Installing blinds does not require special skills, but keep in mind that any damage that occurs during the process independent work, will exclude the possibility warranty repair, exchange/return of curtains.

Depending on the type of curtains, your preferences and conditions, blinds are installed:

In the window opening;
On the wall;
To the ceiling;
On the window itself.

We have compiled 3 step-by-step instructions and a selection useful videos, with which you can mount horizontal and vertical blinds of any kind in any way.

For installation horizontal blinds on the wall or ceiling, as well as for installation vertical blinds above the window you need to prepare:

Electric drill with concrete drill 6-8 mm;
Self-tapping screws and dowels 6-8 mm;
Tape measure or ruler and level;
Pencil;
Phillips screwdriver or screwdriver;
If it is necessary to shorten and cut curtains to width: a hacksaw, scissors, threads, needles.

Instructions for installing horizontal blinds on the wall/ceiling

To correctly install blinds to a wall or ceiling, you need to perform the following steps.

Step 1. Check the complete set of curtains and lay out all the parts on work surface.

Make sure that the curtain kit includes: universal fasteners for blinds 2 pcs. (or standard brackets), screws, assembled blinds themselves. If you are installing blinds more than 2 m wide, then the set of fasteners should also include an intermediate fastener, which will fix the curtain in the middle, preventing it from sagging.

Step 2. We attach the curtains to the wall/ceiling, determine the exact location of their installation and mark the left and right edges of the curtain rod using a tape measure and level. Next, from each mark (towards the sides from the center) we make an indent of 2-3 cm and also put marks - these are places for installing fasteners-brackets.

Step 3. Now we apply the right and left fasteners to these marks and mark the exact drilling locations directly along the screw holes. We drill these marks with a drill. The drilling depth should be 3-4 cm.

Step 5. If you are installing blinds more than 2 m wide, then at this stage you need to install intermediate fasteners. To do this, mark the middle between the already installed fasteners and repeat the steps from steps 3 and 4.

Tip: to ensure reliable installation of heavy aluminum, bamboo and wooden curtains, intermediate fasteners are installed 10 cm from the adjusting thread, since this place bears a large load.

Step 6. Insert and close the top cornice of the blinds into the bracket locks. If these are standard brackets, then the cornice is simply screwed to them with screws.

Instructions for installing horizontal blinds in a window opening

To install horizontal blinds in a window opening, you need to do the following work.

Make sure that the blinds are supplied with: fasteners for blinds (brackets) 2 pcs., screws, the blinds themselves in assembled form.

Step 2. We try on the curtains to the desired place in the window niche and check whether the blinds interfere with opening.

Step 3. Now we apply the right and left fasteners to the upper inner plane of the window niche, stepping back from its walls 2-3 cm towards the center, then make marks in the locations of the fastener holes. This way you will have 2 marks on the right and 2 marks on the left.

Step 4. Now we drill holes along these marks with a drill. The drilling depth should be 3-4 cm.

Step 5. We screw the right and left fasteners (in accordance with the sides and marks) to the upper plane of the window opening using self-tapping screws.

Step 6. Insert and close the top curtain rod into the bracket locks by simply turning and/or pressing the lever clockwise. If you use regular brackets for fastening, then the blind cornice is simply screwed on.

Instructions on how to install blinds directly on your own plastic windows watch in this video:

You can see how to properly shorten horizontal plastic or wooden blinds with your own hands here:

Instructions for installing vertical blinds to the ceiling/wall and in the window opening

Installing vertical blinds with your own hands involves the following steps:

Step 1. Check the package and lay out all the parts on the work surface.

The set of vertical blinds includes: fasteners for blinds (brackets) 2 pcs., screws, cornice, curtains themselves in disassembled form (slats with weights, lower connecting chain).

Step 2. Before installing the blinds, you need to make sure that their length suits you. To do this, attach one lamella to the desired location on the ceiling/wall/top plane of the window opening. If the distance from the bottom of the curtains to the window sill or floor is less than 1-2 cm, then it is better to shorten the slats. You can do this yourself: take out the weights, cut off the excess and hem the edges back.

Step 3. Now you need to attach the cornice to the ceiling/wall of the window opening, align and mark its right and left ends.

Then we do the following:

If you are installing vertical blinds to the ceiling, then from the previously placed marks we make an indent of 2-3 cm towards the center and put the marks again;
If you want to install blinds to the wall, then from the previously placed marks we make an indent of 5-6 cm towards the center and also place marks.

If you are installing curtains in a window opening, then you do not need to mark the ends of the cornice; you just need to make marks, stepping back from the walls of the opening 2-3 cm towards the center.

Next, we apply fasteners for the blinds to these marks and mark the drilling locations. This way you will have 2 marks on the right and 2 marks on the left. Be sure to apply fasteners to match the sides.

Note: to install curtains with a width of more than 1.6 m, you need to additionally install an intermediate fastener 10 cm from the adjusting cord.

Step 4. Now we drill holes along these marks with a drill. The drilling depth should be 4-5 cm.

Step 5. Screw the right and left fasteners (in accordance with the sides and marks) to the ceiling/wall with self-tapping screws.

Step 6. Insert and close the blind curtain rod into the fastener locks by turning and/or pressing the lever clockwise. If you use regular brackets for fastening, then the cornice is simply screwed to them.

Step 7. By adjusting the cord, we turn the runners so that they unfold across the cornice (as shown below in the left photo) and proceed to attach the slats, simply snapping them into the grooves of the runners.

Step 8. Attach the bottom chain to the lamella weights, first from their outer side, then cut off the excess and do the same with reverse side lamellas, and then with the second part of the lamellas. Well, that’s all, the installation of vertical blinds is complete, all that remains is to check the operation of the mechanism and adjust the position of the slats.

Below is a video instruction on how to properly install vertical blinds to the wall with your own hands.

You can install vertical blinds yourself if you follow step by step instructions installations. It is also important to know how to care for blinds and what types are intended for which windows.

Kinds

Vertical blinds are divided into the following types: classic, inclined, corrugated, arched, day-night and accordion. When installing vertical curtains, it is important to know which type is suitable for which window and interior:

Classic. Made from fabric, paper or plastic. Designed to darken the room, protect against heating by the sun's rays, and zone the interior space of the room.

Oblique. A type of pleated specifically for windows that are located at an angle in the attic or ceiling. Their feature is a specific assembly system, which does not allow the canvas made of any material to sag when at an angle. Mostly inclined models are produced with electronic control.

Corrugated. This type is a vertical and horizontal double pleat. As a result, the folds look smoother, neater and denser. A corrugated model made of plastic and paper in this design absorbs a significant part of the heat and protects the room from bright light.

Arched. Maximum flexible fabric sheets that take any shape, like a paper fan. Good decision for rooms with non-standard form windows (arches, trapezoids, triangles, beveled windows).

"Day Night". The fabric of such blinds consists of two layers of fabric: light, light-transmitting fabric for daytime use, and thick, dark fabric for protection from the bright sun during the day and prying eyes in the evening.

Harmonic. The design consists of a control mechanism (chain or electric drive), weights, and pleated fabric that resembles accordion bellows. The range of materials, colors and textures is very diverse.

Peculiarities

This product has a number of distinctive features:

They can be closed from top to bottom (classic canvases), from bottom to top, or from both sides at the same time. In this case, the degree of density of the “accordion” can be adjusted: by closing either the upper, lower, or central part of the window.
Suitable for covering irregularly shaped windows.
Optimal solution for attic, attic, ceiling and inclined windows.
When opened, the canvas is compactly folded and hidden inside the cornice.
Convenient for installation on all types of windows.
Various ways fastenings and control mechanisms (manual and electric).
The woven fabric is washable.
The curtain fabric can be made of two types of fabric at the same time, which makes it possible to regulate the degree of transparency, darkness, and sun protection.
Easy installation can be done by yourself.

Advantages

The following are distinguished:

Compactness. Blinds occupy a minimum of space, allowing owners to show their imagination and organize additional window decoration or leave the window sill as a functional surface.
Simple and clear type of control.
Long term services. Special impregnation protects the canvas from dust, grease, dirt, moisture, and abrasion.
Ease of hygiene procedures. They do not require special care. It is enough to wipe their small surface area with a damp sponge and soapy water once every few months.
A variety of designs for interiors in any style.
The tight fit of the canvas to the surface of the glass protects equally well from heat and cold.
Possibility to install the system yourself.
A variety of materials: from light window decoration to total blackout protection.
Possibility to combine blinds with curtains, tulle, lambrequin.

Required Tools

To install vertical curtains, you don't need many tools. You will need: a stepladder, a set of screws from the kit, a building level and drawing supplies, a drill, a screwdriver.

The following will definitely come in handy: a bracket for the ceiling and for the groover, fasteners, corners, clamps, monofilament, stoppers and c-clips, rings for the rod, chain locks, replacement parts. Each instruction contains a detailed list of necessary components.

How to take a measurement

The final result depends on how correctly the measurements are taken. Even expensive ones beautiful models will not look good on the window if there are gaps in the opening or the edges of the slats are constantly rubbing against the wall.

It is important to pay attention to the following points:

For the most accurate indicators, a steel tape measure is used.
The obtained figures cannot be rounded; accuracy must be maintained to the nearest millimeter.
When ordering blinds, the width parameter is indicated first, length – second.
Not a single window opening has absolutely ideal geometric shapes, so measurements in height and width must be made at least at two points.

When installing in a window opening, you need to determine the width at the top of the arch and subtract 20 mm. To determine the height, compare the height of the left and right side arches, subtract 1 cm from the smaller value. For wall mount you need to add at least 10 cm to the wide side of the slope. The length of the slats can be any, but it is recommended to retreat 2 cm from the edge of the blinds to the floor. Ceiling installation implies determining the height (to the floor or window sill) minus 2 cm, it is recommended to increase the width of the arch by 100+ mm.

Mounting options for plastic windows

There are several mounting options: with and without screws.

With self-tapping screws:

It is necessary to mark the places where they will be located.
Then make holes and attach the brackets.
Secure the blinds.
Also make two holes on the bottom.
Secure the ends of the blinds with plugs.

Without self-tapping screws. First of all, you need to mount the curtain, assemble the brackets and install them on the reel. Then this structure must be fixed on the window in order to mark for fastening. The second step is to attach the brackets with adhesive tape at the top of the frame and the string tensioner at the bottom. It is not necessary to pre-attach them with tape, but it is advisable to eliminate problems with subsequent drilling of holes for screws. After installing the guide string, the curtain itself is mounted into the mechanisms.

How to care

Due to the peculiarities of their composition, the materials from which blinds are made do not require special care. Once a month, such curtains can be dry cleaned, and once every few months - wet cleaned. A good addition would be treatment with sprays against fading, exposure to moisture and dust.

If necessary, you can wash such blinds using a gentle wash cycle or by hand.

How to properly attach to the ceiling

Vertical curtains are attached in three ways: to the ceiling, to the frame with drilling, to the frame without drilling.

In all cases, the fastener is a cornice with decorative facade or without it. The brackets on which the structure is supported are fastened with self-tapping screws, hung or glued to double sided tape. Special tape seems rather impractical, however, it is fixed very firmly, so it is important to correctly mark for installing the brackets. Once they are glued, moving them will be quite difficult.

The procedure for installing vertical blinds:

Preparing tools.
Applying pencil markings for installing brackets. To securely fix the fasteners, it is recommended to drill holes for self-tapping screws at the same stage.
Attaching the brackets in a suitable way(with or without drilling).
Installation of cornice.
Installation of slats. To do this, you need to pull the control cord, with the fastenings for the slats located on it, so that they are in the desired position.
Then fix all the slats on the hooks of the fasteners.

Wall mounting

Installation work Wall decoration requires certain skills and experience; it is necessary to take into account some nuances and features. Installation of blinds begins long before preparing the working surface and a set of tools:

The first step of this process is an informed decision regarding the type and variety of blinds, material, color and texture, depending on the functionality of the room.
Second important point- this is the correct marking. Much, if not everything, depends on it, including how easy the installation process will be. If all the features of the architecture window openings will be taken into account by specialists when ordering blinds from them, everything will go easily and smoothly without the help of professional installers.
It is also important to consider whether it will be possible to open the window after installation, how the light protection devices will work, and whether there is a risk of deformation for them.
Installation of blinds. Must be carried out exactly with markings and subsequent verification of the functionality of the structure. The most important point here is the choice between fastening with drilling and fastening without it.

How to hang on the balcony

To install, you must follow these steps:

Degrease the areas of the balcony and fasteners that will be connected with adhesive tape.
Install blinds.
Assemble the brackets.
Mark the mounting brackets. To do this, you need to attach the brackets to the assembled blinds, install them on the window without fastening, mark with a pencil the places for the adhesive tape, and remove the curtains.
Install the string guide against sagging. Attach to the “ear” of the top bracket and weighting of the curtain, and fix at the bottom in the tensioner, which is installed on the frame.

Before installing blinds on plastic windows, you must first of all acquire a minimum set of necessary tools, and also get acquainted with information on how to mount them. Blinds help regulate the flow of bright sunlight into the room, as well as protect from prying eyes from the street. But at the same time, they do not interfere with the passage fresh air through open window and very easy to use.

Methods for attaching this type of curtains depend on their design, as well as on the condition of the surface to which they will be attached. They can be installed even without drilling, using double-sided tape or other special fasteners.

What are blinds?

Blinds are one of the types window curtains, which is a structure made of plates (lamellas), a special cornice, as well as a mechanism by which control is carried out.

Variety of species

1. Horizontal

Horizontal blinds (Venetian shutters) are a canvas made of thin plates arranged horizontally. They are built into a rotating system of a special drum and a system of cords that sets them in motion. They make it easy to adjust the level natural light indoors, so they are appropriate to use on windows in the bedroom, kitchen or bathroom.

In the photo - horizontal blinds in home interior, they add special charm and comfort to the design of the room

Horizontal blinds, in addition to standard models, are:

Cassette – this type curtains, has a system in which the lamellas, rising upward, are hidden in a special box - a cassette. They are compact and take up very little space, so they allow you to make maximum use of the window sill surface.
Inter-frame horizontal blinds are installed between window frames and can only be mounted inside windows that have two independently opening frames, with at least 40 mm between the panes. That's why they are installed between wooden frames windows, and it is technically impossible to install them inside a sealed double-glazed window.

Inter-frame blinds are controlled using a rope that is pulled through in advance drilled holes, they are then covered with a decorative plug

2. Vertical

Vertical blinds consist of a cornice and vertical slats, attached to it using holders, in the upper part, and in the lower part - connected by a chain. They slide apart in both directions thanks to a rotary-sliding mechanism and a cord. More often they are made from fabric impregnated special compounds, but there are also models made of aluminum or plastic.

Based on the width of the lamellas, they are divided into narrow - 89 mm (American standard) and wide - 127 mm (European standard).

This type of blind helps to visually expand narrow room, but for small rooms it is better not to use them, as they take up a lot of space, because they are mounted above the window opening or even on the ceiling

3. Rolled

Roller blinds are a solid canvas that, when closed, rolls up onto a special shaft in the form of a roll. They can be mounted either on the ceiling or wall, or on the vertical part of the window opening.

Roller blinds are designed to completely cover the entire window or its individual sashes, so if you need to change the degree of shading during the day, then this option of curtains will not be entirely convenient

Material of manufacture

The choice of blinds is not limited only to the functionality of the design, but also to the material from which they are made.

Aluminum – lightweight material, not susceptible to temperature changes. Curtains made from it can be placed in rooms with high humidity and dust, but they have a small drawback - noise in the event of a draft. To clean them, you can use a sponge dipped in soapy water or even a vacuum cleaner.

For the manufacture of lamellas, a special tape that is resistant to bends and breaks is used. aluminum alloy with heat-resistant colored acrylic coating.

Aluminum – easy to paint various colors, because the blinds from this are very practical material can become a bright highlight in a house or apartment

Textile(cotton, polyester or mixed fabric), after pre-treatment with special compounds, is used for the manufacture of vertical or roller blinds. Depending on the density of the fabric, they can be 100% light-proof and also create light shading, which is why they are best placed in the bedroom, nursery or living room.

Textile blinds can be cleaned dry or wet, but it is still not advisable to hang them in rooms with increased level humidity and pollution

Tree can't stand it high humidity, it is also not advisable to install products made from it next to a radiator, stove or fireplace, as they may become deformed. Wooden structures are made of very thin plates that pass preliminary preparation, including lamination.

Wooden blinds due to their color scheme will bring nobility and sophistication to the interior; they should be placed in offices, dining rooms or living rooms

Plastic used for making blinds for production premises, as it is resistant to most acids and solvents, mineral oils and alkalis. Such products do not absorb odors, they are easy to care for and do not fade in the sun.

Products made from thermoplastic polymer vinyl chloride - plastic, do not accumulate dust and dirt, they are resistant to deformation, as well as temperature changes, therefore blinds made from it always retain their original shape

Mounting options

Before choosing a method for attaching blinds to a window, you must first of all pay attention to the condition of the walls and the design of the window opening, as well as the type of curtains themselves, because each has its own characteristics in fastening.

Main types of fastening:

Inside the window opening;
Overlay;
Separately for each sash;
To the ceiling;
On the wall.

Installing blinds on plastic windows is quite simple, and you can do it yourself without resorting to the services of a specialist. They come with instructions that describe the recommended installation process for this type of curtain. The main thing is to think about whether it will be convenient to open the window for ventilation, and whether constant access to the window sill is needed.

You need to use the blind mount that matches the material of the walls, ceiling and window profile.

Installation using self-tapping screws is considered the most common, simple and reliable.

Installation on plastic windows

Preliminary preparation: measurements and markings

The blinds have a clear geometric shape, so you need to carefully prepare and take the necessary measurements to avoid unnecessary holes and asymmetry. Proper placement of the structure depends on the dimensions of the window opening, as well as on the distance between the fasteners. To install it, it is enough to have a screwdriver or screwdriver, a pencil, a tape measure and a level. The height is measured from the mounting location and, of course, an allowance must be made depending on the type of installation.

Inside the window opening - you need to subtract 4 cm from the width of the window opening, and 2 cm from the height, this is so that there is a gap between the curtains and the window so that it opens freely when the blinds are raised.
Outside the window opening (if the window is located in a recess in the wall) - add 10 cm to the width and height of the blinds.
Outside the window opening (the window is on the same plane as the wall) - you need to add 20 cm to the width of the curtains, this will better darken the room, and their height should be no less than the height of the window.
On window sashes, add 3 cm to the width of the blinds so that they do not interfere with the rotation of the window handle.

Proper preparation is the key to comfortable use of this type of curtains, because they must completely cover the glass, slightly extending beyond the frame and not scratch the window sill

Before installing the blinds on the window, you need to make markings and mark the attachment points using a marker and draw a straight line with a pencil along the level. Correct markup must be carried out with special precision, because the slightest distortion will ruin appearance window. The main thing is to comply optimal distance between fastenings - symmetrically on all sides.

Experts recommend installing an additional fastener on the side on which the adjusting cord is attached, because that side will bear the heaviest load. After marking, you can install the cornice, to which the slats and runners themselves will be mounted in the future.

Possible options for installing cornices

The cornice is the basis of any blinds and there are several basic ways to install it. When purchasing curtains, the kit always includes installation instructions, which indicate recommended mounting methods.

1. Installation of cornice without drilling

Advantage this method– there are no visible holes in the profile, and the blinds are easy to remove without leaving traces of them on the window.

Installation is carried out using special brackets, which are attached to the frame of the plastic window, and the load-bearing part of the blinds is already mounted on them. The brackets are attached to the window sash using double-sided tape or by hooking onto the upper part of the profile.

2. Installing the cornice on the window profile using self-tapping screws

To do this, you need to determine and mark the location of the top bar of the blinds - this will help to avoid displacement of the load-bearing part and the formation of cracks in the profile. Only after this make holes for the screws, and then, and then attach the curtains and screw them with screws.

3. Installation of a cornice with fastening to a wall or ceiling

It is necessary to drill holes 3-4 cm deep in the marked places and insert dowels into them corresponding to the wall material. After that, attach the brackets using screws and insert the curtain rod into the bracket locks until it clicks (or screw it in).

If the blinds will be attached to the ceiling, the vertical distance from the window can be any, and if to the wall, then this distance is limited by the length of the standard bracket - 15 cm

Adjusting the size of blinds

Standard blinds do not always fit window openings by size, and products by individual orders They cost much more than ready-made ones; to save money, horizontal blinds can be cut on the sides yourself, and vertical ones can be shortened.

Cutting horizontal blinds to width and height

If horizontal blinds do not match the width or height of the opening, their size can be changed. This process is labor-intensive and requires special tools.

Since designs from different manufacturers have different sizes, then sometimes it is necessary to adjust the product to a specific window. To do this, the main thing is to carry out correct calculations and all manipulations must be carried out very carefully so as not to spoil the product itself

In order to change the width of the blinds, you need to cut the slats and cornice themselves, on one or both sides at once. It is better to shorten on the side on which the control mechanism is located.

Step by step trimming process:

Remove the plugs and protective cover from the cornice, and move the control mechanism and cord system to the pin;
Place a mark on one of the slats and, folding all the slats into one multi-layer strip, clamp them with clamps or an elastic band;
Using a hacksaw with fine teeth, saw off the excess along the mark - cornice, lamellas and rail;
Finish the edges with a file or sandpaper;

In order to change the height of horizontal blinds you need:

Open the blinds completely and make a mark at the desired height;
Open the bottom bar and untie the knots on the restrictive cords, then remove the clamps;
Remove excess trims and trim the lace;
Reassemble the structure in reverse order.

Cutting vertical blinds to height and width

In order to fit vertical design in width, you need, first of all, to cut the cornice, but adhering to the basic rule - the cornice should be slightly larger than the window opening.

Step-by-step process for cutting vertical blinds:

In order to trim the cornice, you need to measure the required length with a tape measure and make a mark on the side on which the lifting mechanism is located;
Since there is an aluminum rod and cord inside the cornice, you need to remove the side cover from the cornice using a screwdriver and move the cord to the side so that it does not interfere;
Using a hacksaw, grinder or special file, first make a small cut so as not to damage the lace, and then cut the cornice according to the mark;
Remove excess hooks from the cornice, unfastening them from each other if you need to cut the top with wire cutters;
Shorten the cord by first unscrewing the plug that secures it and removing the end from the cord. After cutting, the plug must be put in place;
To cut the chain - to do this, you need to unfasten the special plastic clasp connecting its edges, take out the outermost ball and cut off the required length, and then fasten the clasp again.

When cutting vertical blinds to width, it is important not to damage the cord during the process of shortening the cornice.

In order to make the slats of vertical blinds shorter you need:

Remove all the plates from the hooks and pull out the bar with the hook eye from each one.
Place all the plates together, perfectly straight, and secure them with an elastic band.
Measure out right size, and make a note, adding a margin of 3-4 cm for the hem.
Cut the slats using scissors.
The edge of each strip must be treated with fire so that the fabric does not fray.
Fold each lamella and make a hole in each for fastening.
Insert the strip into each lamella and secure the ends with glue.

It is very important to make marks with a pencil so that each lamella is the same size, because an error of a few millimeters will create a sloppy effect.

Cutting roller blinds to width and height

To cut a roller blind to width you need:

Unwind the roller blind and pull out the control mechanism along with the fabric weight.
Make a mark required height and carefully cut the fabric with scissors.
The length of the curtain drum should be 1 cm longer, so it needs to be cut with a margin.
Cut the weighting material exactly to the size of the fabric.
Assemble the structure.

Photo instructions correct pruning roller blinds width

Length roller blinds It’s very easy to change; to do this, you just need to take out the bottom curtain rod and cut off the excess, then trim the edges of the curtain and insert the weighting material into place.

Features of fastening curtains depending on the type

All types of blinds have a similar design, which includes slats, latches, brackets, holders (lower cornice) and a mechanism for controlling the product. But at the same time, each type of these curtains has its own installation characteristics.

Installation of vertical blinds

Vertical models are supplied with all the necessary elements for fastening, as well as instructions for their installation. First of all, you need to decide where to attach this type of curtain - on the wall, ceiling or overhead window slope, and also carry out proper preparation and marking - this process is described above.

Installation process for vertical blinds:

Make markings for installing the cornice.
Drill holes in the wall and secure the brackets.
Snap the curtain rod into the brackets.
Insert the slats into the cornice - to do this, you need to insert each plate into the corresponding latch until it clicks.
Unfold the lamella runners perpendicular to the cornice.
Insert the slats into the runners.
Attach the weights to the bottom of the slats and connect the weights with a chain.

To attach vertical blinds with a width of more than 1.6 m to the ceiling, you need to install 3 fastening brackets, instead of 2. To do this, you need to place an additional fastening point at a distance of 10 cm from the control cord.

With the help of vertical curtains you can transform the interior, making it elegant

Horizontal blinds can be attached to the wall, in the window opening, or on each sash separately.

Installation of horizontal models

Fix the brackets (fasteners) on the top panel of the blinds.
Attach the curtains to the window and make markings for the top fastening.
Secure the brackets with self-tapping screws and insert the curtain rod until it clicks.
Unfold the secured fabric downwards and mark the points where it will be attached bottom bar and install it according to the same principle as the top one.
Attach the adjusting strips.

When installing this type of curtains, it is important to attach the brackets symmetrically to each other, as well as to the window opening

Installation of horizontal cassette blinds

A special feature of installing horizontal cassette models is that its box with mechanism must be mounted on window frame. Installation of this type of curtains is very simple:

Attach top bar with the canvas using screws.
Side guides with adhesive backing, glue on window sash in a vertical position.
Unfold the canvas and adjust the boundaries of the upper and lower positions of the canvas.
Install all accessories.

With the help of this photo instruction you can learn the basic principle of how blinds are attached. Cassette curtains are easy to install yourself and you don’t have to contact an installer

Installation of roller blinds

Roller blinds have the same mechanism as horizontal ones, which is why they are installed in almost the same way. It is more convenient to mount them directly on the window sash, so it will be more convenient to open the window for ventilation. To attach this type of curtain, you need to use special brackets so that the window handle does not protrude from under the curtain.

The photo shows the installation mechanism for roller blinds open type without drilling

How to install inter-frame blinds

To install interframe blinds you need:

Unscrew the window frame and attach them to the inner sash of the window to check that the sizes of the slats match the size of the glass - ideally, these slats should be a little wider.
Make markings for the holes for the cord and control handle.
Using a drill, make two vertical holes in the window frame - top and bottom.
Secure the brackets.
Route the cord and flexible lead out through the holes.
Secure the blinds using inter-frame brackets.
Connect the control stick to the flexible rod using a clamp.
Close the frame.

Inter-frame blinds require special installation skills, so if they are not available, it is better to contact specialists

Before installing blinds on windows, you need to check whether they will interfere with opening the window, and whether the handles, flower pots and others decorative elements will not interfere with opening and closing blinds and turning the slats.
When choosing curtains you need to pay attention Special attention on the material from which they are made, because its performance properties depend on this.
After installation, be sure to check the smooth movement of the sliders, control cord and turning chain - movements should be smooth and without jerking.
Horizontal blinds are the most practical option curtains, even for those windows for which it would seem impossible to choose curtains.
If you need to adjust the size of curtains for a specific window, then you should add 2-4 cm to all measurements before cutting.

Blinds are a type of curtain that most people consider office, but this is not entirely true. With their help you can not only protect the room from bright sun rays, but also to decorate the design of the room in an original way

Installing blinds on plastic windows with your own hands is not difficult if you first familiarize yourself with detailed instructions. Thanks to the variety of materials, designs and color solutions of this type of curtains you can choose the most good option for any room.

Interior design often involves choosing window decor. Today, horizontal blinds are increasingly used for such purposes. Designs of this type are characterized by ease of operation and long service life. Installing blinds requires special skills, so a beginner cannot always solve this problem. If you do not know how to install horizontal blinds on plastic windows, be sure to consult a specialist.

Advantages

Horizontal blinds are several thin plates that are connected to each other by a thread. This allows you to control their location in different planes. Such designs come in several types, each of which differs in the material of the lamellas.

The most common modifications are blinds made of aluminum plates. This product has many advantages:

The metal perfectly withstands temperature changes and is also not susceptible to destruction under the influence of ultraviolet radiation.
The lamellas are light in weight, but at the same time have a fairly large margin of safety. They resist deflections well.
They don't burn.
The material does not accumulate dust, grease and odors. Perfect for both a modern office and a home kitchen.
The service life can reach 20-30 years (with proper care).
Relatively simple and quick installation.
Easy to care for. To clean the surface, simply wipe the surface periodically with a damp sponge.
The design takes up little space, which allows them to be installed in almost any interior.

Another popular type of horizontal blinds are wooden crafts. This product has the following advantages:

The material protects the room very well from light penetration.
The wood does not heat up.
The products are environmentally friendly. They do not accumulate dust, which allows them to be used in the bedroom or nursery.
Unique design. Lamels are made from various wood species. This allows you to choose a design at your discretion.

It should be understood that wood is afraid of moisture, so it is not recommended to use such blinds in the kitchen or other wet rooms.

Lamels today are also made from polymer materials. Plastic blinds differ in the following features:

The quality of light protection is the best among all the models reviewed.
Cleaning the plastic is quite easy. In this case, you can use almost all household detergents.
The material tolerates moisture well.
The service life is practically unlimited.
The plastic construction is lightweight and small in size.
Plastic tolerates well high temperature. This allows you to install blinds even in swimming pools and bathrooms.
Ease of use.
Relatively low price.

But plastic is not universal material. Blinds should not be installed near any heat sources. This can lead to deformation of the plates. Also, the polymer quickly fades in the sun and gradually turns yellow.

Mounting methods

Horizontal blinds are available in various sizes and modifications that can be adapted to specific characteristics window. Such systems can be mounted in various places:

To the ceiling. This type of placement is only possible for solid foundations.
On the sash. Fixation occurs directly on the window frame itself. Often similar options are found when blinds are used small size for each individual glass.
To Wall. One of the most popular installation methods. It is used for structures that completely cover the entire surface of the window.
In the window opening. Here, installation can be carried out directly on the base of the frame or on the ceiling of the slopes.

When choosing the location of blinds, you should take into account their functionality and design features. All these characteristics must be qualitatively combined with each other.

Preparation for installation and measurements

Installation of horizontal blinds is technically possible without specific experience. The procedure for marking the fasteners begins. To do this, the structure is applied to the future location and the locations of the brackets are marked. It is important that the system is positioned strictly horizontally.

If the products were sold disassembled, then the blinds should be assembled before marking. All such operations should be performed only on the basis of the manufacturer’s instructions. This will avoid distortion and possible damage to the elements during operation.

When marking, it is important to consider the location of the product. The mechanism should not interfere with the opening of the valves, unless, of course, it is mounted directly on top of it.

Installation methods

No drilling

Many manufacturers have simplified the installation method for horizontal blinds as much as possible. You can attach this structure yourself using the following fasteners:

Double sided tape. Fastening can be done either directly using adhesive tape or using special brackets. The last option involves fixing the fasteners using this tape. Please note that this installation option is only possible on the window sash itself. To obtain a reliable fixation, it is important to pre-degrease its surface. After this, marking is done. It is necessary that the canvas be positioned strictly parallel to the plumb line. If there is a misalignment, then this will lead to rapid wear of the control mechanism. When the entire system is aligned, you can fix the structure on the window.
Clamps. Similar option Can only be used for opening sashes. The installation process involves fixing the clamps directly to the cornice. To do this, you just need to put them on. After this, the sash is opened and these fasteners are hung on it. This is quite simple to do, as you just need to press the mechanism a little and it will click into place.

With drilling

A more universal way to install blinds is to use special metal brackets. With their help, you can mount products both on the wall or ceiling, and directly on plastic sash window.

This operation consists of the following sequential steps:

Initially, the location of the cornice is selected and markings are made.
Forming holes. Please note that if you mark the places for them incorrectly, this will lead to skew. Since there is no need for extra holes in the wall, everything should be done carefully.
Attaching the brackets. To do this, use special screws or anchors, which are often included.
Installation of cornice. This element is fixed with special latches. This operation does not require significant effort.
Installation of canvas.

It should be noted that this method of fastening does not depend on the location of the cornice. Here the only difference may be the type of bracket and the location of the latches on the surface of the blind frame.

How to hang it on a window opening?

The algorithm for installing blinds on a wall consists of several sequential steps:

First of all, you need to determine whether all components are available. If the blinds have a width of more than 2 m, then they must be supplemented with intermediate fastening. This eliminates sagging of the cornice.
The next step is marking. To do this, the blinds are located above the window in in the right place. Then they retreat from the ends by about 3 cm and mark the locations of the brackets.
When all the marks have been made, use a drill to drill holes for the dowels. It is important to choose the correct hole diameter in order to form a strong connection between the fastener and the wall. If the structure is wide, then you need to drill a hole in the middle in a similar way for an additional dowel. Please note that for heavy aluminum or wooden blinds, the distance of the end screws must be at least 10 cm from the edge of the cornice.
When the brackets are screwed, the cornice is hung on them. It can be fixed in several ways. The most convenient mechanism is considered to be self-latching locks. More simple products need to be screwed to the frame using self-tapping screws or self-tapping screws.

The process of installing blinds in the opening itself can be described by the following sequential actions:

Initially, the technical equipment of the product is checked. Pay attention to the size of the cornice. The method of attaching it depends on this.
Assembly of blinds. The process is carried out in accordance with the manufacturer's instructions.
Marking. To do this, the cornice is installed on the plastic window sash. Sometimes installation is possible on the ceiling of the opening or on the wall that is formed above the frame frame. When taking measurements, it is important to check whether the blinds do not interfere with the movement of the opening sashes. The mounting locations for the brackets are also marked on the base.
After this, holes are drilled and fasteners are attached. You should not drill deep, as you can do through hole. If fixation occurs directly on plastic, special screws should be used.
The process ends with hanging the cornice and canvas. This process is similar to that described in the previous section.

At first glance it may seem that installing horizontal blinds seems easy and simple process. However, it is worth considering that windows and walls in houses are most often uneven, so installing horizontal blinds requires appropriate experience and knowledge.

If you are confident that you can install the blinds yourself, then you must adhere to a certain installation technology.

To do this, you will need tools such as a Phillips screwdriver, hammer, hammer drill or impact drill, drills and drills. The first thing you need to do is decide on the method of installing horizontal blinds - attach them to the frame or in the window opening, to the wall or to the ceiling.

Only after choosing the mounting location and taking correct measurements can you begin to install the blinds. In order for the installation of horizontal blinds to be carried out reliably and efficiently, it is necessary to use fastenings - brackets or brackets, which are supplied with any blinds.

Brackets can be used to securely mount blinds on almost any surface.

Video: Blinds for plastic windows. Measurement and installation.

Technology for installing horizontal blinds:

1. Mark the places where the brackets will be attached. When marking, you need to take into account that the brackets should not touch the latch and the control device. Using a ruler and level, mark the placement of the fasteners from each other at a distance of more than 60 cm and less than 25 cm from the uppermost sections of the blinds.

If the width of the blinds is large, you can use intermediate fasteners to increase the reliability of installation. One of the brackets must be placed near the lifting and lowering device, since in this area the blinds device is subject to the greatest load.

2. Consistently drill holes in the wall and insert dowels into the markings. Screw the brackets with screws. It is very important that the screws and dowels are completely similar to the fastening, wall or ceiling material.

If you plan to attach horizontal blinds to the PVC window frame, then drill window profile not necessary, since there are special brackets designed for metal-plastic windows. It is worth noting that this fastening method may only be suitable for a swing-and-turn sash.

3. The blind curtain rod is installed on the mountings.

4. The top bar of the blinds is placed on the brackets and locked with a lock. Moreover, horizontal blinds must already be assembled.

The installation of inter-frame horizontal blinds has some differences from the technology presented above. Such blinds should be installed in internal space between the glasses.