Interior decoration of a house made of timber (interior decoration of a timber house)

Houses made of timber are most often finished with clapboard, imitation timber or other natural materials. The peculiarities of the interior decoration of a house made of timber include that when using dry profiled timber, the inner side of the walls can not be covered with clapboard, but simply sanded and painted. Less commonly, a house made of profiled timber is finished with plasterboard, tiles, etc. This is partly due to the fact that the walls look beautiful and natural without finishing. It is also worth noting that the interior decoration of a house made of timber usually begins after the house has settled.

Interior decoration of a frame house

Manufactured houses frame technology, do not shrink. That is, if a frame house set is made of dry wood, then it will not change its size and shape at all. And to any finishing works You can start immediately after installing the roof.

If the frame of the house is made of lumber of natural moisture, then as the wood dries, the gaps in the joints may increase. In this case facade works And interior decoration frame houses are available after natural shrinkage of the frame. (3-6 months)

Interior decoration of a house from SIP panels

Houses made from SIP panels are the same frame houses only in them as wall material a SIP panel (structural insulating panel) is used, consisting of a layer of insulation, covered on both sides with OSB sheets. As is the case with frame houses You can begin interior finishing of a house using SIP panels immediately after completion. construction work, no shrinkage time is required.

Interior decoration of a log house

Most the best option for a log house there will be sanding and coating of walls special compounds and caulk with decorative rope. Simply put, preserving and enhancing the natural beauty of wood. But in some cases, plating is performed log house plasterboard, MDF, finishing tiles in bathrooms and other similar materials.

Finishing nuances

Start finishing from the inside wooden house is possible only after painstaking study of the topic: methods, technologies. The materials used for wall cladding are those that allow air to pass through and create good microcirculation.

If you use sealed materials, the walls of the house simply stop breathing. These rules fully apply to the insulation process and external treatment. If the structure does not allow air to pass through, then the greenhouse effect is inevitable. You can solve the problem using forced ventilation, which means that significant investments will be required, loss of time, and the need to control the quality of ventilation.

When carrying out interior finishing wooden house you need to use lightweight materials that will not increase the load on the foundation.

Start of the process

Finishing is possible after the end of the active stage of shrinkage. This rule applies to a new, newly built house. If you have to process old design, then you can start immediately. It is important to consider the following:

If the base of the house is a log and ordinary timber, then ideally the finishing starts no earlier than a year.
If the base of the house is dry profiled or laminated timber, you can start in 1-2 months.

It is necessary to take into account climatic features, average temperature, humidity indicators. Finishing the interior of walls made of logs and ordinary timber is allowed after caulking is completed.

The work involves two stages:

First, the caulking process is carried out several weeks after the walls are assembled.
The second part begins at least 6 months later - after shrinkage.

To caulk walls, you need a material with heat-insulating and sealing properties. Tow and jute meet all the criteria for high quality. They are widespread due to their affordable cost, unpretentiousness, and durability. It also happens in practice that some people use moss as a material for caulking because... there were no more modern substitutes.

Work is carried out from the outside and inside at the same time, you need to start from the bottom. As soon as the crown is ready on one side, it is worth moving to the other side - this will help avoid distortion.

When the work is completed, the object will rise a few centimeters, but soon the inter-crown filler will become more dense and the original height will return. Drafts will practically not make themselves felt due to the tight fit of the timber or log; this will significantly increase the thermal insulation performance.

Caulking wooden walls - special kind activities, implying its own technologies and nuances, you can find out more about this in the article. As soon as the second caulking is completed, you need to measure the height of the walls from time to time. If the data has not changed within a couple of months, it means that the shrinkage has ended and finishing can begin.

Preparation for finishing

It is not always advisable to veneer walls from the inside. If the inter-crown insulation is invisible, and the design is neat and tidy, then the sheathing can be abandoned and replaced with cheaper, practical paints and varnishes. However, if the caulking seams are unattractive, there are surface defects, and the texture is uneven, then only finishing will correct the situation.

It is very important to protect wood from mold and mildew, regardless of the characteristics of the materials used. Manufacturers offer effective, safe, inexpensive antiseptics especially for such purposes. Additionally, you can take fire retardants, which, as the name suggests, make the texture non-flammable.

Types of finishes

Decorating a house with your own hands is not one, but several options:

Drywall.
Wall panels.
Lining of different shapes.

Regardless of the specifics of the materials, it is required to install the frame on the surface. Wood has proven itself ideal. Yes, some technologies involve abandoning the frame, but the base must be perfectly flat, without chips or protrusions. Sheathing on the frame is advisable because:

It will allow you to hide the wiring.
Provides clearance for wall drying and air circulation.
You don't have to make the base level.
It is convenient to install thermal insulation materials.

It also has its own characteristics. So, there is a chance that rodents and insects will appear in the gap and you will have to take additional measures on deliverance. Wood paneling at home implies the presence of a small gap near the ceiling, this reduces the occurrence of shrinkage and deformation. Optimal width is 2-4 cm, this space can be easily hidden by installing a decorative plinth.

Sheathing using lining

Interior decoration of a house with wood is a great variety. Lining guarantees an abundance of shapes, widths, and special textures depending on the type of wood. You can divide the lining based on the transverse profile into the following types:

American.
Landhouse.
Blockhouse.
Standard.
Softline, etc.

The fastenings are also different:

Using clamps.
Using screws and nails at an angle.
Nails into the face. This method is not very common because it is considered not very attractive from an aesthetic point of view.

Self-tapping screws with nails and clamps are not simple; it is necessary to fasten them and prevent deformation of the lining on the front side.

Self-tapping screws or nails are often replaced with special ones construction staplers with staples. This allows the use of staples with a narrow part on the “back” side and with long legs. The fastening materials are based on special metal compounds, steel with anti-corrosion treatment.

Wood is used as the basis for the lining, which means shrinkage is also relevant. If chamber drying has been carried out, the material will be of the highest quality. However, to purchase lining that has passed chamber drying, is not so simple, which is why many homeowners who are decorating choose more available options. The following nuances need to be taken into account:

When securing initially, you need to remember that the cladding will have to be dismantled, so it’s worth deciding on suitable tools: screws or nails.
If you follow aesthetic considerations, you can dismantle the lining and then nail it again.
It is possible to leave the surfaces in their natural form - as is.
If natural drying has taken place, then gaps will appear between the finishing elements.

Features of wall panels

Wall panels - a wide variety design solutions, the ability to implement projects of any complexity. Perhaps this is one of the favorite options of designers, since it does not limit imagination. If we talk about finishing a wooden house using wall panels, then you need to correctly determine the type:

Leather.
Plastic.
Glass.
Bamboo.
Wood.

Each option has its own specifics, for example, if you choose glass, you should be especially careful and take precautions. In addition, the glass is massive, which means it has an impact on load-bearing structure. If the wall fencing is miniature and thin, then it is better to abandon this option.

Features of drywall

Drywall is used very actively, it is inexpensive, lightweight, and beautiful. Nuances:

Is not different great strength, resistance to mechanical stress. Ideally, it should be sheathed only 2 years after the construction of the object. Plus, the operating mode should be normal, with the heating on.
When installing sheathing after 1-2 years from the date of construction, you need to install drywall on a floating frame. This significantly reduces the risk of movement of the trim and base relative to each other.

In problem areas, cracks should not open, which is achieved by gluing with a reinforcing mesh. It is inexpensive, its base is polymers, and with its help, seams, joints, and corners are reinforced.

If possible, it is better to use slats and bars made of wood. If taken metallic profile, then waterproofing measures are carried out: general rule states that if materials with excellent properties come into contact with each other, waterproofing is necessary.

Old wooden buildings

If you work with old wooden houses, then you need to objectively assess the condition of the object, in particular the walls, provide additional protection, identify suspicious areas, and further examine them. A chisel, knife, and screwdriver will come in handy. The following are considered problem areas:

The density of which is different.
The texture of which is different.
The area is darker or lighter than the rest.

Sometimes you have to deal with the fact that wood fibers crumble and become thinner. In such cases, it is better to consult a specialist to determine the extent of the damage. If no serious defects have been identified, then it is enough to treat the base with an antiseptic.

If you have any questions about interior decoration frame houses. Write to us.

Wood is a material that is very popular for the construction of private houses. Although stone and brick are also popular, many people prefer timber, which creates a unique look for the home. But after the construction of the building, it is important to take care of the interior decoration of the house. For it to be successful, it is important to take into account all the features of a material such as timber and choose the most suitable type of finish. All possible options and nuances interior design houses will be discussed further.

Peculiarities

A house made of timber has a number of characteristics that are not typical for houses made of other materials. Among them there are both positive and negative qualities. The advantages of wood include:

The material is environmentally friendly.
A house built from timber has a very presentable appearance.
Constructing a building from wood elements takes less time than working with other materials.
There is no need to spend a lot of time laying an expensive foundation, since the timber will not create large loads.
Compared to other materials, wood has a lower price.

The nuances that cause difficulties are considered following points:

When the building is erected, everything needs to be carefully planned interior work that need to be completed. To the main procedures interior design and finishes include:

Laying communication systems. These include heating, sewerage, electricity, and water supply systems.

Coating walls with special compounds and antiseptics that protect against fire.

If desired, you can carry out thermal insulation and waterproofing of the floor and walls.

Next, the subfloor is laid.

To make the work more organized, it is recommended to prepare in advance a project for the arrangement and finishing of all rooms.

Partitions and other additional structures are being installed.

Walls, ceilings and floors must be carefully prepared before decorative finishing.
After this, the finishing itself is carried out.

The interior decoration of a building made of timber as a whole is a rather labor-intensive process, so it is important to describe in detail all stages of the work, as well as to choose the right material for finishing various surfaces.

Types of materials

There are many materials that are used for the interior decoration of a private house made of wooden blocks. Each raw material has its own special characteristics and is primarily used for a specific type of coating. The most popular materials for finishing a wooden house are:

lining made of plastic and wood;
drywall;
block house;
decorative plaster;
decorative rock;
vinyl siding;
dye;
tinting compounds;
varnish coatings;
laminate;
linoleum.

photos

Wooden lining is laid on special sheathing made from wood. Using nails, slats and grooves, the beams are connected to each other and attached to the sheathing. The lining is made from various types of wood, which include pine, spruce, linden, and alder. The material significantly affects appearance, strength and class to which the products belong. IN The following classification is distinguished:

Extra class. Lining that has no defects.
Class A. Implies high quality, and even the presence of small knots does not spoil general form coverings.
Class B. Average quality, knots in products are more common.
The lowest class is C. It implies the presence in the material not only of knots and irregularities, but also of color variations.

Vinyl siding or plastic lining They are excellent for installation in rooms with various purposes, since these coatings are resistant to various influences. In addition, they create an additional layer of heat due to the voids present in the structure. Installation of plastic lining is carried out on a metal frame. The material with a vinyl surface is resistant to moisture and sun rays. Plus, it comes in a variety of color options.

The special material is decorative fake diamond , which is made from various raw materials. This material mainly plays an accent role in the finishing of profiled timber. The stone is placed on the crate, imitating various breeds. Using this coating, zones are identified in large rooms, and also accents are placed in the interior.

It is quite difficult to install such material yourself, so it is recommended to invite professionals for such work.

It is also worth paying attention to what kind of timber the structure of the house itself is made of. The beam can be made from different varieties wood The most popular is pine. It has the following characteristics:

Due to the soft structure of wood fibers, the material is excellent for processing.
This wood is strong and forms a completely reliable frame for the home.
Pine beams are environmentally friendly; they do not emit substances harmful to human health.
The shade of pine beams is usually uniform. Most often, natural material is painted in warm colors.
Despite all the positive characteristics, pine wood is sold at a price that is very affordable for the majority of the population.

Among other types of wood for construction timber house cedar, larch, spruce, and fir are popular. In many ways, their characteristics are similar to pine. Also, the beams can be laid according to various technologies, which determine the choice suitable material for interior decoration.

Drywall is a very flexible and plastic raw material for home decoration from ordinary bars. Before laying it, it is necessary to carefully treat the surface of the walls. The material is attached to a special frame structure. Most often it is used as wooden sheathing, a layer of insulation is laid in the space between the drywall and the wall. The GLK sheets are fastened using screws, and the seams between them are subsequently treated with plaster compounds and become less noticeable.

For finishing coating Many formulations will work. Drywall is popular not only for finishing walls, but also for ceilings.

Alternative material for the frame is rounded laminated veneer lumber. Its difference from the standard one is that construction in in this case practically does not shrink. Walls made from such beams turn out smooth and elegant, so their texture is most often left visible during interior decoration.

Such a timber surface is treated with a special primer, and then paint and varnish mixtures are applied in several layers, which serve not only as a means of decoration, but also protect the surface from various influences. For the floor of such a home, laminate, ceramics or parquet boards. And the ceiling can be decorated using GLK or lining.

Some owners of private houses decorate their interiors using imitation timber relief. To create it use block house- a type of lining, which is a planed board, one side of which ideally imitates timber. The block house is installed on the sheathing, but it is not necessary to place it in all cases. It will be needed for laying a thermal insulation layer or masking communications. The sheathing is made from small bars or galvanized profiles.

The difference between a block house and an ordinary lining is that the latter can be laid both horizontally and vertically. The imitation timber is placed only in the horizontal direction.

Also, materials such as MDF or siding are used as imitation, but the block house has the greatest resemblance to natural bars.

Projects

To get a seamless and organic interior, it is recommended to design each room in advance and choose the most suitable style directions. In the design country house will become a relevant option chalet or hunting style. It looks very brutal and involves a combination of materials such as wood and stone in the design of the walls. Most often, rooms are decorated with clapboards, the walls are decorated with various hunting attributes, for example, animal heads or hunting equipment.

Russian style looks good in decoration interior decoration private house. It assumes the presence of a structure of beams on the walls. It is permissible to decorate the floors with laminate, imitating large boards. There must be a massive stove in the center of the room.

A house of this type can also be decorated in European, Scandinavian or provencal style . In these cases, a special feature will be the trim made of lining or siding in light shades. Sometimes a small number is welcome bright accents. Windows are decorated with light screens or curtains.

In style minimalism As a rule, large features dominate. This applies not only to the surface texture itself, which can look like beams, but also to other details, for example, windows and furniture. Having decided on the features of styles, you can choose the most suitable option to decorate your home.

How to sheathe?

No less important than the choice of material and style is the process of covering various surfaces of a wooden house with your own hands. The features of this procedure depend on the selected area. The main surfaces for decoration include walls, floors, and ceilings.

Ceiling

It is better to start the process of decorating surfaces from the ceiling, especially if you prefer to paint the ceiling and walls, or varnish them. The ceiling can also be sheathed with plasterboard and tension structures can be created.

If the ceiling is painted, its surface must be thoroughly cleaned and coated with a primer. After 24 hours, when it is dry, you can begin the painting process. To do this, use a long-haired roller. The process itself must be carried out quite quickly, since the paint quickly hardens on the ceiling surface. In this case, it is advisable to have an assistant who could point out color unevenness during painting (they can only be seen from below).

Instead of paint, the ceiling can be finished with clear varnish to highlight the structure of the wood fibers.

Walls

The walls of the room can be decorated various materials. But regardless of the selected raw material, it is important to remember that the first stage of work involves cleaning and degreasing the surface. The process of preparing walls also includes laying insulation and a waterproofing layer, and treating with putty. Some people prefer to simply plaster the inside of the house. But in this case it is worth remembering that it is not recommended to apply plaster soon after the construction of the house.

When covering beams with varnish or paint, the material should be applied in the direction of the wood grain.

For application coloring compositions a roller can be used, but for processing corners and hard-to-reach areas It is better to work with a brush. When choosing a varnish, pay attention to the content of harmful substances in it, as well as the texture itself, which can be glossy, semi-gloss or matte. Often, fabric wallpaper is even glued onto the leveled surfaces.

Floor

The arrangement of the floor is also very important point interior decoration of a house made of timber. In a private house there are two types of flooring – rough and finished.

The rough design represents the base. It consists of logs, between which a layer of waterproofing and insulation is placed. These layers are then covered with boards. For a private building It is recommended to make the floor with a double structure, since it is more capable of retaining heat. The finishing coat is applied directly to the boards.

Finishing is carried out in several stages.

Laying a layer of waterproofing on the subfloor boards. The material can be a polymer membrane made of film or roofing felt.
Installation of timber installed on an edge rectangular section 5 x 10 cm. The design features of this layer depend on the specific finishing coating.
Reliable fastening of the power set to the floor. To carry out this type of work, it is recommended to use self-tapping screws of the appropriate size.
Laying insulation in free space. Mineral fiber, rolled glass wool or even polystyrene foam can be used as a heat insulator.
Laying the finishing layer is the final stage.

Qualitative timber house with finishingFull construction prefer to buy busy people who do not have time to do repairs themselves. In this case, for a relatively small additional payment, the client will receive a cottage with fully finished interior decoration. You will need to bring furniture, arrange it to your liking and you can start living in this wonderful house.

The SK Domostroy company offers its clients turnkey construction of houses at the best prices. You can see photos of the interior decoration of the house on the website.

How is the interior finishing of houses made of timber carried out at SK Domostroy?

Interior decoration of a house made of profiled timber at SK Domostroy, construction begins only after the house has completely settled. Only then can you begin installing doors and windows and other types of finishing work.

For example, only environmentally friendly materials are used for repairs. clean materials, which will not harm the health and life of customers. All work carried out is agreed upon with the client, and he can independently monitor the progress of all operations performed.

Dear visitors! The BrusLandia company reports that when you order the construction of a house made of timber or logs, you receive the following services absolutely FREE:

SERVICES FREE:

Setting up a cabin on the site for the crew to live in (if there are no other accommodation options).
Delivery of materials to the site using our own equipment.
Unloading and storing material on site.
Working project of the house.
Redevelopment of a house to suit your site, without changing the amount of materials.
Technical supervision over the quality of work performed. 3 year warranty. Home warranty service.

Information for customers

Types of profiled timber

Profile A- This is a classic type of profile, it has a wide groove, a compensation cut at the top and bottom (it saves the timber from cracks). The timber fits tightly to each other, and in order to prevent the house from shrinking, the crowns are fastened with wooden dowels. The joints of the beams in the corners of the house are made according to the dovetail principle, which ensures that there are no through gaps in the house.

Profile B- This type of profile, which is often called Finnish or Scandinavian, is the most popular in the construction of houses made of timber. It has a double lock (which ensures the tightest fit of the crowns among themselves), a special cut at the top and bottom (it saves the timber from cracking). Better thermal insulation jute helps (a special seal that is placed between the crowns). Also, the crowns of the house are fastened with wooden dowels (so that the timber does not move when it dries out). The beams in the corners of the house are dovetailed (so that there are no through gaps in the house). A house made of timber of this profile is very durable, warm and usually lasts for many years without repair.

Profile B- If you are choosing between profiled timber and logs, this profile is an excellent option, as it has all the advantages of option A, plus with outside imitates a log. Jute is placed between the beams (the most best insulation, many times better than moss and tow). And the crowns are additionally fastened with dowels (these are wooden sticks for attaching the timber to each other). This fastening ensures even shrinkage of the house.

Services	Price
window frame	prices from 4,000 rub.
Door frame	prices from 6,000 rub.
Met. tiles (without insulation)	prices from 130-1400 rub./m2
Met. tiles (with insulation)	prices from 140-1500 rub./m2
Natural tiles (with insulation)	prices from 1800 rub./m2
Painting	prices from 90-100 rub./m2 layer
Log skin	prices from 300 rub. /m2
Installation of platbands	prices from 600 rubles opening
Imitation of timber, in racing	prices from 450-500 rub./m2
Subfloor - plywood	prices from 250-300 rub./m2
Clean floor	prices from 400-500 rub./m2
Assembling a log house	prices from 3000-3200 rub./m2

Wooden houses are now very popular among the population. And the reason for this is the many advantages of such buildings in Moscow. Assembling a house from timber takes a very short time, appearance They have a very presentable one, and to order, the price of such a structure is affordable for most consumers, unlike, for example, brick analogues. In addition, wooden houses have excellent thermal conductivity in cold weather, and in the summer they give the house coolness and comfort. Finish can be different materials, not only inside, but also outside. Let's look at the issue of a house made of timber in more detail.

Turnkey exterior finishing of a house in Moscow

A turnkey wooden house built in itself already has beautiful view. He seems to hint at a closeness to the nature of his owner. Therefore, many want to leave such a pristine and natural look and do not cover the outside of the house with anything at all. In this case, a special solution consisting of antiseptics is simply applied to the beams to prevent the formation of mold and fungi. And after that the house is covered with varnish and paint. All these measures are necessary so that the structure is not encroached upon by any pests and microorganisms, it is not subject to deformation and would serve you well long years. Please note that the cottage must be painted on a turnkey basis constantly to ensure its durability.

If you don't want to use paints and varnishes, then for exterior finishing use a variety of decorative items. Usually they are resorted to if you plan to stay in the house in the winter. cold period time of year. The first finishing is the insulation of the home. And only after that the exterior is finished with the material you like. Let’s look in more detail at what exactly can be used to clad a house made of timber in a high-quality and inexpensive manner.

For example, finishing with materials such as stone, granite or porcelain stoneware

Natural or artificial stone is an excellent and very effective material for home decoration. In addition to giving houses an aesthetic appearance and properties, the stone has great strength, it does not allow moisture to pass through, and does not react to temperature changes. If you decide to use stone for your exterior, this would be a great choice. Your home will be reliably protected from adverse impacts weather conditions and will serve you for many years.

The entire house can be covered with stone, or only partially. In any case, this finish goes well with wood. There is also usually a wide variety of options on sale. decorative stone. Therefore, you can easily let your imagination run wild and try yourself as a designer.

Another finishing material that looks like stone is porcelain stoneware. He also looks very elegant and noble. Porcelain stoneware perfectly withstands temperature changes and mechanical stress, and is not afraid high humidity and other natural influences. In addition, it perfectly repels dust and dirt. And if the need for cleaning does arise, it is very simple to do.

The finishing is done with the most popular material – brick. Brickwork will always look beautiful and aesthetically pleasing and will suit any style of home. Well, about the beautiful ones performance characteristics This material is known to everyone. It is reliable, retains heat well and is durable. Brick, along with the insulation used, will further increase the thermal conductivity of your home. However, to achieve maximum effect, both from the point of view of thermal conductivity and aesthetics, brick finishing should be carried out by a qualified craftsman with experience. And it is also not recommended to purchase material options for this, the prices of which are low.

Finishing timber houses using plaster in Moscow

This material is designed to protect the structure from exposure environment and also make its appearance more attractive. Plaster performs the function of insulation, protects houses from mold, bacteria and moisture penetration, and it is also convenient in that when applied it can hide all the unevenness of the walls and similar construction flaws. As a result, a special structural or relief mixture can be applied to the walls, which is decorative in nature.

However, the plastering process is not the easiest. This finishing requires the presence and experience of certain skills. If you do not have them, it is recommended to trust the professionals. They will definitely do their job perfectly. Plastered walls can be painted to further highlight the topography or structure. The pricing policy for these services can be viewed on our website.

Finishing a house made of timber using siding in Moscow

Finishing timber houses using siding - pricing policy of this material low and easy to install. However, in the end it will look nice and neat. Siding protects the building well from the influences of nature - precipitation. There is also a huge variety on the market various options this material. Therefore, you can safely fantasize about what your turnkey cottage should look like. Let's look at the types of siding and prices.

Metal siding. Typically this type is used when cladding timber structures. industrial purposes than in the residential sector. The metal is strong and flexible at the same time, and also has long term services. However, the finish has disadvantages. Metal is a very heavy material, its price itself is high, and in the event of mechanical impact, dents will remain on it. In addition, steel is susceptible to corrosion. Therefore, it will need to be additionally processed with special means.
Vinyl siding. If you look from the outside, this finish will resemble ordinary boards. The only difference is that vinyl does not deteriorate over time. The price of this material for timber is very cheap, it is lightweight, and it is also easy to install. It is easy to wash and does not require any additional care. You can find a wide range of similar products on the market. Vinyl siding is not exposed to sunlight, retains its color for a long time, and is not attacked by fungi and bacteria. To remove dust, siding can be simply wiped periodically with water and detergent.
Cement siding. This is a very durable material, and it is also fireproof. However, cement is not popular among the population. And the reason for this is a decent amount of raw materials, which affects the ease of installation and transportation. Also, the weight of the entire house increases significantly, not to mention the foundation. And to order, cement is not the most affordable price.
Wood siding. It is extremely rare that finishing is used for the outside. Typically wood is used inside a building. Prices for material for cladding timber are high. And its main disadvantage is its ability to absorb moisture, which negatively affects the service life of such siding.

Home finishing work using panels that imitate logs

It may seem strange that a house built from timber needs to be covered with a material that imitates it. This is true, for example, for old houses made of timber, the logs of which are no longer pleasing to the eye with their attractiveness. Wood tends to darken, absorb dirt, and become damaged. It is not always financially possible to build a new cottage on the site of an old one. The cost of finishing the outside with imitation material will be much cheaper.

But wooden panels are used only when you plan to completely repeat the contour of your building, preserving its naturalness and original appearance, and at the same time insulate it. The panels completely copy the profile of beams or profile beams. Moreover, this siding is so realistic that it is almost impossible to detect the imitation with the naked eye.

Before finishing begins, the walls are covered with specialized solutions to protect against mold, bacteria, moisture, fire and various pests.

Fachwerk - finishing a house in this style

A very original and effective choice. This medieval style is very popular in Europe. And in our country, many consumers prefer finishing in this style. Materials for affordable price Finishes include slabs of chips and cement, as well as OSB panels. To complete the finishing in the half-timbered style, you need to make the following elements:

Frame of vertical and horizontal partitions
Wooden braces
The gaps are filled with various finishing material, for example, brick, stone or something else
The wall is decoratively divided into geometric figures. Parts for this can be crossbars, braces, etc.

How to finish the inside of a wooden house?

The interior decoration of timber houses also has a wide variety of materials. Unlike the exterior decoration of a house made of timber, in this case more attention is paid not to the strength characteristics of the material, but to its decorative properties. Those. the finishing should match the future furniture and other decorative elements, and fit well into the overall style and interior of the house. You can not limit yourself to one material, but use several; it’s enough just to maintain harmony and aesthetics.

Application of decorative stone

Very good option, ordering a house made of timber, where the walls are relatively smooth. Therefore, it will not be possible to lay them out with stones special labor. In addition, the stone has many advantages:

The walls can be painted the color that you like and that suits your interior. In addition to its aesthetic function, paint can protect wood from the effects of fungi and bacteria. Before the painting process, the walls must be leveled, covering all the depressions and cracks. After this, the surface of the timber is primed so that the paint adheres better to the timber.

It is advisable to choose environmentally friendly paint. When dry, it should not release unpleasant odor. Moreover, you should pay attention to the fact that in the end the wall may have glossy surface or matte. What exactly is your choice, what you like best or what best suits the style of the room.

If you don’t want to change anything at all, but want to preserve the naturalness of natural wood, then you can emphasize it even more with the help of colorless varnish and stain.

Finishing a house made of timber, using siding or plastic and wooden lining

If your cottage is already quite old, but you still gravitate towards natural wood, then, as an option, you can use lining for finishing. However, lining is not the final finish, and this must be kept in mind. Wood is usually subject to rot, and besides, all kinds of insects and mold love it. After finishing a house made of timber with clapboards, it must be treated with specialized compounds for protection, as well as varnish.

Yes, perhaps finishing houses made of timber with clapboard is not the easiest task. However, in the end you will get a natural look natural wood, which will always delight you and your guests, and at an attractive price. Your old building will get a second life. If desired, you can successfully execute wooden clapboard and stone. It is difficult to imagine a better and more natural combination. This way you can model and make the design as original as you imagine it to be.

Another affordable material for finishing a wooden house is plastic siding. It also has some advantages. It is easy to clean and does not absorb water. Therefore, this option for such a finishing price will be optimally suited for bathrooms or kitchens. In addition, the plastic is lightweight and very easy to install. Also, and very importantly, the ease of installation means that you can handle it on your own. There is no need for any special knowledge or skills. This way you can save a decent amount of money. And the prices for plastic siding are much lower than those ordered from competitors.

Decorating walls in a house using plasterboard

This material is the most popular among consumers on given time. With its help, walls are quickly leveled to perfect condition, its price is low. In addition, all sorts of things are made from plasterboard decorative elements, for example, arches, roundings, partitions, etc. There is room for the designer's imagination to run wild here. However, drywall has one unpleasant drawback - it hides part of the room. Therefore, it is not recommended to use it in small rooms.

Drywall itself is not the final finishing material. It is usually covered with wallpaper, painted or other facing material.