All children deserve a cozy place that they can call “their own,” whether it’s for lounging around, watching cartoons or reading. Even something as small as a comfortable seat can go a long way.
And while you can choose absolutely any chair in the store, wouldn't you want to make it unique, just like your child? Try to make a children's soft chair yourself.
By building something with your own hands, you will get exactly what you want, and you will also save money.
The most simple option there will be a pear chair or a bean bag chair. The simplicity, perhaps, lies in the fact that this model is frameless.
Some online training videos can be intimidating in their complexity. But no need to worry. Two pieces of fabric, a zipper, some straight stitch machine stitching and a charming Baby chair- the bag is ready.
Necessary materials:
- two pieces of fabric (fabric for upholstery is preferred - it is more durable);
- zipper 60 cm long;
- filler (the amount will depend on the type of material).
For seam allowances, leave 1.5-2 cm.
Progress:
- Cut two pieces of fabric 107 x 82 cm each. The cuts can be identical or in different colors.
- Fold the fabric right sides together. Sew the long raw edges using a zigzag stitch. This will prevent wear and tear. Then sew the same edges with a straight seam. It is advisable to use a short stitch length, which will also add density to the product.
- Fold the fabric in half (horizontally).
- Starting at the folded side, round the ends, cutting about 15 centimeters from the corner.
- Turn the fabric right side out. The result is a symmetrical rounded bend on one side. You've got a rough edge again. Finish it with a zigzag stitch and then straight stitch it.
- Open up the raw edge. Place right sides together, but now with the seam between the two pieces of fabric facing up.
- Sew the zipper into the hole created. You can use an invisible zipper, it will be almost invisible.
- Close the edge of the clasp with straight stitches on both sides.
- Turn the finished case right side out and fill it with filler.
Frame chair
What it consists of:
- particle boards;
- plywood;
- foam;
- special glue;
- fabric for covering.
Tools:
- self-tapping screws
Progress:
- Cut the chipboard sheets into a semicircle - this is your base. Using self-tapping screws, attach three bars (40 cm each) at an angle of 90°.
- Cut out the front pillars from plywood. Their width should be half the length of the semicircular part. The length is equal to the length of the bars.
- Attach all parts to the beams with a drill and self-tapping screws.
- Attach foam rubber to the frame.
- Cover the finished fittings with fabric.
You can also use a leather substitute for upholstery, which is very convenient for children's furniture. This upholstery is easy to care for.
Wheel made from tires
A great idea on how to reuse scraps of plywood and worn-out tires left after renovation.
What you will need:
- 2 tires;
- plywood;
- foam;
- upholstery fabric.
Tools:
- self-tapping screws;
- furniture stapler.
Progress:
- Place the tires side by side.
- Fasten together using large self-tapping screws.
- Be sure to cover the bottom tire with felt to avoid damaging the floor in the future.
- Make the back from plywood. Give it the desired shape. Also attach it with self-tapping screws.
- Choose thicker foam for the inside of the seat. Cut out a circle and fill the tire with it. Then cut out a larger circle to cover the top of the seat. You can use thinner foam rubber.
- Cover the back with foam rubber using a furniture stapler.
- Cover the chair with upholstery fabric.
Instead of upholstery, you can sew a cute quilted cover. The child will appreciate it!
Unfortunately, sometimes it is difficult to navigate the sizes and quantities of materials if you use leftovers. Try to create your own unique model.
First, evaluate your resources: what materials and tools do you have at your disposal? Is everything enough? Sit down for the drawings! Don't worry if the materials available to you are a little unconventional. Using imagination and enthusiasm, a child's chair can be made from anything.
What is upholstered children's furniture made from? Yes of all:
- Styrofoam;
- thick cardboard;
- old furniture cushions;
- foam rubber without using a frame;
- remnants of laminate or parquet;
- polyurethane foam;
- plastic bottles and much more.
Involve your child - he will give you a thousand ideas. Make the chair soft and cozy. Find fun prints that you think fit with your favorite little person's personality. This will be an unforgettable gift not only for a holiday, but also just because.
There are no similar entries.
In modern furniture stores you can find any piece of furniture to suit every taste and style. Sometimes financial situation or too high demands do not allow you to find a suitable chair in style and comfort.
That is why now you can find instructions on how to make a chair with your own hands step by step.
What kind of chairs can you make with your own hands?
You can find a lot of instructions on the Internet on how to make a chair, which is why anyone can do it, especially if you know how to use a standard set of tools.
First you need to buy everything you need, the missing tools and materials, and then start creating sketches and drawings of the future piece of furniture.
The peculiarity of a DIY chair is that it makes no difference which sketch you use. There are certain step-by-step instructions, the points of which everyone adheres to.
Before starting work, you should familiarize yourself with the possible seating options and choose the one that interests you. However, I note that some types are very difficult to make without special equipment, and for some you need great experience. We also recommend that you watch a master class on how to make a chair with your own hands.
Types of chairs
If you have a question about which chair to make with your own hands, then here is a list of all possible options that you can make yourself:
Usually a chair
An ordinary chair, it is also called soft. It consists of three main things: frame, upholstery, and filling. Suitable for installation in the home.
Folding chair
It has a frame that can be folded or unfolded. This option simply cannot be replaced when relaxing outdoors, at sea, or even at home if, for example, you always have a lot of guests and there aren’t enough chairs for everyone.
Kentucky
Chair for the garden or cottage. Looks great in the garden or country house, easy to make.
Ladle
A sports-type chair on which several belts can be installed, thereby effectively securing the person sitting in place.
Photon
A transformable chair that is both a chair and a mattress. Moreover, this “transformation” is very easy to implement.
Sliding chair
Great for rooms small sizes, due to the fact that they simultaneously perform the function of both a bed and a chair.
Chair on small wheels
It is convenient to ride around the entire apartment or house. Will help elderly and sick people with housework.
However, it is worth remembering that wheels under the weight of the human body can leave scratches on the floor, especially if you have varnished parquet at home.
High back chair
Perfect for people who sit for a long time, for example, at the computer, no matter on personal initiative or for work.
Thanks to the fact that you can fully lean on it, you can sit in it for much longer. It is also very comfortable. By the way, there are soft and hard options.
Rocking chair
Surely a mention of this subject You associate furniture with an elderly person. However, this type chairs help many people, for example, with sleep disorders or mothers of babies.
The latter not only rock the baby to sleep, but also relax themselves. For example, after sleepless night, this is an excellent option, you will definitely be sure that you will not accidentally drop your child due to fatigue.
Non-folding chair
Very convenient to use, helps to fully relax and unwind after a hard day at work. Now their choice is huge, so you can not only make it yourself, but also look for the right option in the shop.
Previously, non-folding chairs with so-called ears were very popular, on which it was convenient to lean and they also served as a kind of fence.
Bag chair
Probably the most comfortable chair on the entire list. It does not have a frame, but inside there is a soft filler that can completely replicate the contours of the human body.
Due to this feature, it is truly the most comfortable and you can relax and unwind in it. Not only is there a huge amount of design for these chairs, but you won’t spend a lot of money and effort to make it.
By the way, if you don’t understand a certain type, then look at the photo of a DIY chair of this type. This way you will not only understand what kind of chair we are talking about, but you can also stumble upon step by step instructions your favorite piece of furniture.
So today you found out best ideas DIY armchairs, namely their types, which you can make yourself at home. I hope you have no questions left on the topic and have chosen the appropriate type of chair.
Photos of armchairs with your own hands
It’s true what they say: the Internet is a treasure trove useful information. People share valuable knowledge here and original ideas, opening up more and more new perspectives for each other.
A person without experience and skills gets a unique opportunity to organize furniture production for himself at home. There are many detailed master classes with ready-made diagrams who will help you make any furniture, whether you have the necessary tools and a penchant for the craft.
Of course, you should start with simple projects, like the one presented in this master class. Anna White, a well-known craftswoman in narrow circles, has prepared for everyone detailed instructions, which talks about how to make a simple chair from boards for your home or terrace with your own hands.
IN finished form it comes with stylish pillows. You can also make them yourself. Anna will briefly tell us about this too.
In this project you can use the simplest lumber that does not require processing. milling machine and production of complex groove joints.
Gather your materials and prepare everything you need before you begin. You will need:
Materials:
1. pine board 50 mm thick:
- 4 pcs x 50 x 100 x 550 mm - leg parts;
- 2 pcs x 50 x 100 x 810 mm - armrest parts;
- 6 pcs x 50 x 150 x 710 mm - side trim parts;
- 2 pcs x 30 x 30 x 710 mm - slats for seat parts;
- 4 pcs x 50 x 150 x 620 mm - back parts and lower part of the front panel;
- 2 pcs x 50 x 100 x 620 mm - upper part of the back and upper part of the front panel;
- 5 pcs x 50 x 100 x 620 mm - seat parts.
2. glue for woodworking;
3. furniture screws;
4. stain or protective and decorative oil for wood processing and tinting;
5. furniture varnish with a transparent coating or varnish toner.
Tools:
- a circular saw or a miter saw for cutting boards;
- sander;
- electric drill;
- screwdriver;
- paint brushes;
- soft fabric lint free for oil;
- construction tape and square;
- pencil.
Step one: detailing and marking parts
When deciding on the final dimensions of the chair, the author proceeded from the dimensions of the seat and pillows for it. The seat is an even square with sides of 620 mm. If you want to change the dimensions of the chair, all the dimensions indicated in the master class will have to be recalculated.
Otherwise, take advantage of these great detailed diagrams and write down on paper all the details that you will need for the job. Please indicate the exact size of each part. You can find a list of them in the list of materials for this master class.
Before you begin, make sure that all your boards are planed to the same thickness, otherwise the finished chair will look like typical sample handicraft. This processing of boards is carried out using a surface planer. As a last resort, you can order it from a workshop, but it is better to initially select properly processed lumber.
Mark the parts of the chair using a pencil and a square. Square - especially useful tool, if you plan to cut the boards by hand using a hacksaw.
Step two: making parts from boards
You will need thick boards 50 mm thick, but of different widths: 100 and 150 mm. In addition, prepare a rail no narrower than 30 mm for making parts of the base for the seat.
Cut the board into pieces of the required length using miter saw or a manual circular saw. Both of these tools allow you to make perfectly straight cuts, which is very important when making furniture.
If you are using hand saw on wood, be prepared for the fact that the cuts will have to be adjusted by hand for neat tight joints.
Sand all the parts in any way convenient for you. For example, an electric sander. For sanding pine, a piece of block with sandpaper attached to it will do. True, such work will take much more time.
Step three: assembling the wooden chair
Attach the trim pieces to the legs at intervals of approximately 20 mm. Pre-drill holes in the places where the screws will be screwed in to prevent the boards from splitting.
If you want the chair to serve you for a long time, use glue. In this case, apply a little wood glue to the joint, press the parts together and tighten the screw or self-tapping screw.
Fix the armrest on each of the side panels and connect the side panels to each other with the upper part of the backrest. Please note that along the inside of the chair all the upholstery parts are located flush with the frame, and along the outer contour they are somewhat recessed inward.
Insert your working strip into the gap between the side panels, place the upper part of the backrest in its proper place and secure it with screws. Screw the remaining back elements.
On the front panel, secure at the bottom wide board, and at the top - narrow by 100 mm. Sew up the seat and to complete the assembly, secure the top back piece, placing it flat.
Try to screw in the screws in the same vertical line to make the job look neater.
After some time has passed, when the chairs have already been tested in everyday life, the author advises fastening the seat parts in such a way that the seat itself is positioned at a slight angle. This will make sitting much more comfortable. The same can be said about the back of the chair.
Step four: wood processing
It is convenient because it allows you to easily apply the composition and repeat this procedure at any time in order to refresh the product. In this case, all preparation of the surface for re-painting comes down to light sanding by hand with sandpaper.
You can also use alcohol stain in combination with several layers of furniture varnish or, say, natural drying oil.
Apply the stain with a brush along the grain and try not to touch already painted areas again, otherwise the tone will be uneven.
A good alternative is also a decorative toner oil, which not only imitates valuable species wood, but also protects the tree from rot, the formation of mold and fungi, as well as from exposure to moisture.
You can varnish the chair with matte furniture varnish in order to extend its service life. Do not use varnishes on water based, since they do not have a sufficient level of strength and wear out quickly.
Apply the varnish in several layers, sanding each previous layer as soon as it hardens. Use fine grain for this sandpaper, and do the grinding itself carefully, without much pressure. Finishing layer There is no need to sand the varnish.
Step five: finishing touch
Simple furniture like this wooden chair, needs beautiful textiles. The author used ready-made furniture pillows with floral patterns.
However, you can make pillows with your own hands. To do this, you will need foam rubber (preferably furniture grade, high-strength), batting or thin foam rubber to give the pillows shape and additional volume, as well as strong threads, suitable fabric and a sewing machine.
Cut the thick foam into pieces of the size you need. IN in this case into squares with sides 600 mm. Wrap them in one or two layers of thin foam or batting. Attach the fabric and determine on the spot how much you will need to sew the covers.
You can also make the covers in advance according to the pattern and, based on their size and shape, prepare the filler.
If you plan to wash the covers and always keep the pillows clean, sew the covers from simple thick fabric and make a removable set with zippers that you can always remove and wash in the machine.
The vast majority of soft chairs can be divided into frame and frameless. Children's chairs stand apart, the production of which has a number of technological differences. The question arises: is it necessary to pay a lot of money for a finished product if you can make something similar with your own hands?
We will tell you about the process of making upholstered chairs, provide drawings, photographs and videos that will allow you to successfully complete the task. You will also find a list necessary materials and tools.
- 1 What will you need?
- 2 How to make an upholstered chair with your own hands?
- 2.1 Traditional soft product
- 2.2 Beanbag
- 2.3 Child seat
- 3 Drawings and useful video
What will you need?
First of all, you need to decide on the upholstery material. There are significant differences in both the cost of upholstery and its physical properties. Let's look at the most popular options:
- Velours. Velvety and fleecy fabric. Externally it resembles faux fur.
- Chenille. Natural material, “diluted” with synthetic fibers. Thanks to this, the surface does not roll off and is practical and durable.
- Flock. The fabric vaguely resembles velor, but experts recommend using flock to make child seats. The fabric is easy to clean and wash, has water-repellent and wear-resistant qualities, and does not fade.
- Jacquard. The fabric is easy to clean and highly durable, but the structure includes synthetic fibers. Therefore, loose loops can lead to tightness.
- Faux suede. The material is fleecy and durable, does not fade and can “breathe”. Ease of care is an added bonus.
- Faux leather. The material is characterized by high wear resistance. In this case, the leather is distinguished by the presence of embossing.
- Tapestry. This is a natural and very expensive fabric, which can be distinguished by its visible weaving. Multi-colored threads, woven into the overall structure, form beautiful patterns.
The most primitive frame structures are based on a plywood template. Therefore, you will need sheets of birch plywood, screws, nails and a standard set of tools:
- protractor;
- steel ruler;
- compass;
- bench and hand vices;
- scriber;
- files;
- hand scissors;
- hammer;
- hacksaw;
- adjustable wrenches;
- soldering iron;
- pliers;
- table anvil;
- hand drill;
- chisel;
- sharpener;
- punch;
- center punch
If you make a bean bag chair, your toolkit will be significantly reduced. In addition, there are simplified technologies developed by folk craftsmen that allow you to assemble an upholstered chair quickly and with a minimum set of equipment.
DIY photo of soft chairs
On wheels
Folding
With knitted element
With low seat
How to make an upholstered chair with your own hands?
Any work cannot be started without a clear action plan. Decide on the design of the future piece of furniture. It is more difficult to create a frame chair, but it looks more respectable.
If you decide to sew a bean bag chair, get ready to master the patterns. Your actions will lie not so much in the sphere furniture production, how much in the field of sewing art. In any case, you will need an approximate budget and an idea of the consumption of materials. For example, a bean bag chair costs 1200-1300 rubles. This includes fabric for the outer (about 300-500) and inner (200-300) covers. Also, 500 rubles are allocated for the purchase of filler.
Perhaps you already have an old “grandfather’s” easy chair that has lost its presentation? Then you can retighten and repair it with your own hands, as shown in the following video:
Traditional soft product
An ordinary chair requires a thorough approach and extensive preparatory stage. Let's look at the list of materials and tools required to make a plywood chair with upholstery:
- 20mm plywood;
- electric drill;
- emery cloth;
- screws;
- jigsaw;
- metal rims;
- thin nails;
- foam;
- wood glue;
- artificial leather;
- stain;
- black glossy paint;
- pencil;
- masking tape;
- roulette.
Let's get started:
Modern easy chair with your own hands
Bag chair
The simplest version of the bag is the so-called pear chair. You cannot do without the following materials:
- calico or satin (about three meters);
- a piece of fabric for the outer cover (about 3.5 meters);
- meter-long zipper;
- filler;
- fabric for appliqué;
- scissors, pins and thread with needles.
Manufacturing:
Pay attention to the strength of the seams of the inner cover - they should not come apart under the influence of the weight of a sitting person.
We will discuss further how to make a children's soft chair with your own hands.
DIY bean bag chair
Baby chair
Making a frameless soft chair for a baby is as simple as making a regular bean bag chair. The difference lies solely in the dimensions and colors of this piece of furniture. Bright colors are welcome cheerful tones, not irritating to the eyes and setting a positive mood.
- You can make a soft frame chair for a child with your own hands in the shape of a semicircular “sandwich” from wooden blocks and chipboard. The front wall of this design is made of plywood, the back wall is made of hardboard. Inner space glue along the bend of the back is filled with glued pieces of cardboard.
- After waiting for the wall to dry, smooth out the unevenness construction knife. A layer of foam rubber is carefully glued on top, on which the upholstery will subsequently lie. You can use eco-leather or flock as upholstery fabric - these options will allow your design to survive the unequal struggle with felt-tip pens and paints.
- Now about the dimensions. A standard adult chair has a meter height (some models reach 120 centimeters) with a bottom diameter of 30 centimeters and a top diameter of 15 centimeters. The height of the child seat should not exceed 60 centimeters (diameters will be 25 and 11 cm, respectively). Take this nuance into account at the pattern design stage.
DIY frameless children's chair
Drawings and useful video
In this section, we have selected photographs of the most successful homemade chairs that we could find on the RuNet. It is impossible to imagine the process of independent furniture production without drawings, so we post detailed diagrams and patterns for bean bags.
Drawings of chairs for making them yourself
Oblique
Retro style
Folding
With soft pillow
You will also enjoy a master class on creating an upholstered chair with your own hands. Watch the video, repeat the steps of the wizard and adhere to the described technological standards.
So, with the help of the presented video, you will learn how to make a bean bag chair with your own hands, which has gained immense popularity in our country:
By the way, if you have Euro pallets, you can make a chair with your own hands from such material, and then just throw a comfortable one on the seat soft pillow. Don't believe me? Watch the following video:
Many people think that furniture production is magic, the secret of which a mere mortal is not able to comprehend. Believe me, with a minimum set of tools, desire, attentiveness and perseverance, you can easily cope with the task. We have presented everything you need - drawings, photographs and videos, so go ahead and amaze your loved ones with your art!
An armchair is one of the most comfortable, cozy, and therefore popular interior items. All chairs are usually divided into 2 categories: with or without a frame. The finished product is often not cheap. But for home craftsmen, nothing is impossible. A DIY chair is a completely solvable issue. In the article we will consider detailed master classes for the production of soft products, as well as original wooden product for the dacha.
Types of upholstery
Upholstery for upholstered furniture- one of them important points. The presentable appearance of the product largely depends on it. Before making a chair, decide on the type of upholstery fabric. Here are the most popular options:
- Velours. Noble fleecy fabric reminiscent of short fur.
- Chenille. fleecy durable fabric from a mixture of natural and synthetic fibers. Does not roll down and retains its beautiful appearance for a long time.
- Flock. Externally, the material resembles velor, but is even more practical. Flock is easy to clean from dirt, so it is recommended to use it for upholstered furniture in children's rooms.
- Jacquard. Durable dense patterned fabric, which is distinguished by increased durability. Disadvantage - due to careless handling, puffs may appear.
- Faux suede. Highly durable material that is great for making a chair with your own hands. Faux suede with embossing looks especially beautiful.
- Tapestry. High-quality, expensive fabric made of natural fiber, with visible weaving. Threads of different shades form a pattern.
Set of necessary materials
If we're talking about O frame structure, the simplest option for the frame is plywood cut according to a template. The best option– birch plywood. From Supplies- screws and nails.
You will also need a set of carpentry tools:
- Metal ruler, compass, protractor - for marking.
- Vise: manual and table.
- File.
- Hacksaw.
- Hand scissors.
- Hammer.
- A set of adjustable wrenches.
- Soldering iron.
- Pliers.
- Drill.
- Kerner.
- Chisel.
- Punch.
Important! If you want to make a fashionable and custom bean bag chair with your own hands, then the set necessary equipment will be significantly reduced. All you need is sewing machine and stuffing material.
Work planning
The beginning of any business is drawing up a clear action plan. Think over the design of future furniture. Making frame chairs is more difficult and expensive, but they have a more respectable appearance than frameless structures.
Success in making a bean bag chair depends on how accurately and correctly the patterns are drawn up. This is no longer so much furniture production as the art of tailoring. Don't forget to calculate the budget for the event.
Important! It’s not bad if you have an old, but quite decent and durable chair. In this case, a lot is simplified, since you can restore it and get an interesting vintage item.
Classic soft product
Such a thing as a DIY soft chair requires a long preparatory stage. Materials you will need:
- Plywood 20 mm thick.
- Sandpaper.
- Electric drill.
- Sets of screws and thin nails.
- Electric jigsaw.
- Metal rims.
- Foam rubber.
- Joinery adhesive.
- Painting tape.
- Ruler, tape measure.
- Stain, glossy black dye.
- Pencil.
Now you can get started:
- Download the drawing of the chair you like, calculate the consumption of materials.
- Make cardboard templates to scale, transfer the outlines onto plywood, then cut out the pieces using a jigsaw.
- Clean and sand the surface of the wooden parts. Please pay attention Special attention end areas, soaking them well with drying oil.
- Paint or stain the sides. Reinforce the end parts of the sidewalls with metal rims. Secure the rims with screws.
- The next stage is covering the product. Start from the back of the back, using faux leather. Next, proceed to covering the remaining parts of the product. Secure the fabric with wallpaper nails.
Important! It is advisable to treat the fastening points with wood glue. The chair will turn out better.
Bag chair
This product is also known as a pear chair. To make it you will need:
- Calico or satin fabric - 3.0 m.
- Fabric for making the outer cover - 3.5 m.
- Zipper - 1.0 m.
- Filler.
- Pieces of contrasting fabric for decoration.
The procedure for making this model of chair is as follows:
- Download the bean bag chair patterns that you liked the most.
- Make cardboard patterns to scale.
- Transfer the contours of the chair onto the fabric. You will need to sew the inner and outer covers separately. As a result, you will have 2 bottoms (top and bottom) and 6 fabric wedges.
- Sew the wedges together. In the resulting bag, leave a small area unsewn. Sew the top and bottom bottom. After you have finished sewing the top cover, sew the inner cover in the same order.
- Cut out decorative elements appliqués and sew onto the outer part.
- Insert the zipper into one of the wedges. If it gets dirty, you can remove the outer part and wash it.
- Stuff the inner bag synthetic filler by about ⅔. Now all that remains is to put the inner bag on the outer bag. Zip up.
The DIY chair is ready! As you can see, there is nothing particularly complicated here.
How to make a soft chair with your own hands for a children's room?
Making a frameless soft chair for a children's room is no more difficult than a regular bean bag chair. The only difference is in color.
Important! It is better to choose a bright fabric that encourages positivity and cheerfulness. Shades should not be too “screaming” and annoying.
Here is one of the options for upholstered furniture in a child’s room:
- The frame chair can be made in the form of a semicircular sandwich. For back wall hardboard is used, plywood is used for the front.
- Carefully glue onto the base furniture foam rubber, on top of which the upholstery will lie.
Important! Best options upholstery material are flock or eco-leather. Even if a young artist paints the upholstery with felt-tip pens or paints, you can remove the marks completely.
- The maximum height of a baby seat should not exceed 600 mm.
Wooden chair for a summer house
Here's another interesting option: DIY wooden chair. Wood is a practical, beautiful and durable material, which, moreover, can be easily processed. In addition, wood self-production home or country furniture has the following advantages:
- Availability of a variety of lumber, their relatively low cost.
- Naturalness, environmental friendliness.
- Pleasant smell of wood. Coniferous wood smells especially pleasant.
- Unique wood texture.
Important! It must be taken into account that the conditions in which country furniture, if not extreme, then close to them. Therefore, you need to pay special attention to treating parts with an antiseptic. In this case, the furniture will serve you much longer.
Pine, spruce, ash, oak, larch or beech are best suited for home furniture production. Parts that are not subject to heavy loads can be made from linden or alder.
So, let's make garden chair with your own hands. Choose simpler drawings to begin with. When choosing a design, follow two “golden rules”:
- Choose the design that is completely clear to you. Mentally work through the entire procedure. Prepare in advance the tools that are convenient for you.
- Consider the place where the furniture will be used and the design of the room into which this furniture will fit. For example, the best option for a summer house is a folding product or an antique rocking chair.
Manufacturing procedure
Let's consider a simple model, which consists of the following components:
- Sidewalls – 2 pcs.
- Drawers – 3 pcs.
- Cross slats – 35 pcs.
It is these 35 slats that will form the surface of the seat.
Most the hard part work involves cutting out the side parts:
- First, make a pattern on cardboard and only then, after making sure that the actions are correct, transfer the outline to the material. The best option for making sidewalls is plywood with a thickness of 3 cm. Use an electric jigsaw to cut out parts.
- Sand the end parts of the sidewalls. With help hand router or grinders, remove the chamfers.
- Now cut out 3 drawers from plywood. The length of each is 120 cm, width - 10 cm. Sand these parts; there is no need to chamfer.
- From a 50x25 mm block, cut 35 sections, the length of each of which is 120 cm. Next, as usual, comes sanding and chamfering. For fastening, prepare 12 confirmations 5x120 mm and wood screws 4x45 mm (40 pieces).
- Mark the places for attaching the drawers. There are 3 of them in total: in the foot, head and in the middle of the outer arcs of the sidewalls. Drill through 8 mm holes for the drawers.
- Pull the side parts of the product together with three drawers. For holes in the end parts of the frames, use a 5 mm drill.
- Now fasten the pre-prepared pieces of bars to the seat using self-tapping screws.
- The final stage is covering the holes and cracks with wood putty. After this, sand the product, prime the surfaces and paint with varnish or acrylic paint.
Video material
As you can see, making a chair with your own hands is quite possible. In the independent production of chairs different types there is nothing particularly complicated. Good luck to you!
