Today we will discuss a very broad topic: how to arrange the inside of a garage with your own hands? Many car enthusiasts think about this question, since such a room is used not only to store a car, but also serves as a workshop for many men. I want to make it efficient and comfortable workplace without spending a lot of money and effort.
And it’s not surprising that the question of arranging a garage is raised so often, because for a true car enthusiast, the garage is a second home, many spend their free time there. And only reasonable equipment of your garage will make it possible to use it 100%, despite the fact that the garage is usually small in size.
Exactly correct location shelves and racks will allow you to work freely without constraining yourself. To do this, you must carefully examine the garage room and identify the so-called extra areas (those that you rarely walk near). If you install shelves in such places, you will rationally use the free space. How to arrange a garage yourself without much waste? You will learn this from this article.
How to plan all areas of the garage during construction
It’s easiest for those who are thinking about arranging a garage before it’s built. Then you can take into account the size of the car and the tables located, as well as other things.
When designing, you can take into account the locations different zones and control their size so that everything works out perfectly and the car fits with all the planned objects. If you have not yet built a garage, but are just thinking about it, you can think about a two-story building. After all, then the workshop can be made upstairs, and the car will stand in free space without any problems.
But what should those who do not build a garage themselves, but bought a ready-made one, do? Setting up a garage in this case will be a little more difficult. But don’t despair, with perseverance and a responsible approach you can overcome any problem.
Before you start emptying your garage of things, carefully consider the location of the car and individual parts; it is best to sketch out a plan on a piece of paper. In order to visually evaluate the garage, get rid of everything unnecessary, then you won’t miss anything and it will be easier to navigate the space. Then you need to take into account the amount of space so that your car can drive in and out without problems and wasting time on unnecessary maneuvering. Also take a closer look at the type of gate; you may need to change them, or change them altogether. If your plans include insulating the walls of the garage, then a few centimeters should be allocated for insulating material.
Be sure to consider protection from thieves and a heating method, this is very important, because in the garage there may be excess humidity, which in turn will lead to fungus.
Basic requirement: order in the garage
Our garages contain not only the car, but also spare parts and tools, as well as winter or summer pairs of tires. If all these necessary things are lying around, then you will definitely not have a productive and free garage.
Internal order not only attracts people, it is useful for those who work in the garage. Clients will be happy.
Now, we will list the advantages that come with tidy garages:
- having provided for everything and thought about a specific place for each part, you can save space for other things or simply move freely around areas of the garage;
- when repairing a car, it will be easier to concentrate during the work process;
- you will save time, because if the garage is a mess, it is very difficult to find the required part or tool.
What you need to consider when arranging a garage-workshop
How to properly arrange a garage to create not just a storage place, but a workshop?
- The first thing you need to think about is purchasing boxes for storing bolts and other small parts, which are easy to lose in the garage. But don't buy one or two boxes, in fact there are many tools that require their own space rather than a wall holder.
- Next, make or purchase stands with built-in holders. But there is more cheap option: to avoid extra costs, order a wooden stand, and you can nail homemade holders onto it.
- Don't forget about the shelves, they are very easy to keep organized. Also remember about budget options, because you can restore old table with built-in shelves, to do this, remove the old coating and apply varnish.
- Many garages have a workbench, and you need enough space for it. It is very important to install shelves next to it, then when working you will not have to walk across the entire garage for the necessary tools.
Many garages don't have room for enough shelves, which can cause problems. But how to make a workshop in small garage? To prevent shelves from taking up your necessary space, you can get by with hooks. You need to install hooks on the walls.
What you need to know when arranging an inspection pit
First, think about whether you need an inspection hole at all. If you have an expensive car, then you probably go for a service. And not everyone can understand cars well. This is a question of necessity, not a beautiful appearance in the workshop.
But still, if you decide that you need an inspection hole, we will help you with the construction.
Where to begin? We all know that construction of any structure does not begin until its dimensions are marked out. Such actions are very necessary, because we will build a hole in ready garage. This, in turn, is difficult to do; it will be necessary to build in limited space.
Take this seriously, because if you don’t get the size right, there can be two extremes:
- If the hole is too large, parking will be difficult. Every time you worry that the car might fall into a hole.
- If you make the inspection hole too small, it will be inconvenient to carry out repair work.
Determine the size based on the design of the room and the dimensions of your car. But it is possible to make a hole based on standard or generally accepted dimensions.
The width of the standard pit is 70 cm. This is enough for the sedan class, especially for Zhiguli. If you have freight car, you need to throw 10-15 centimeters. Leave about 20 centimeters for maneuvering.
Determine the length of the garage pit based on your personal requirements for the car; however, making it less than two meters does not seem logical.
Now you can see a photo that will help you navigate.
It is impossible to say the exact depth of standard pits, because it depends on your height. If your head rests on the bottom, it will be inconvenient or even impossible to carry out repair work. Therefore, find out the clearance height of your car (clearance is the height from the ground to the threshold) and calculate that when standing in a hole, there is 20-25 cm from head to bottom.
Note! It's better to make the hole a little deeper than too small. In any case, you can substitute a stool, but you won’t be able to shorten your legs.
Now that you have calculated the size inspection hole, we can start excavation. You can do this yourself. Concerning concrete works, then the situation is more complicated. This video will help you simplify the task.
How to make a cozy garage
Since a man spends a lot of time in the garage, comfort is necessary. Then work will go more quickly and with joy, because physical labor is the basis for joy. When you see the result, you want to continue.
To do this, you don’t need to forget about the little things that many people don’t notice, but they are the ones who make it cozy. This could be a painting or a figurine made from scrap materials, or even better, from spare parts. The photo below confirms that a cozy garage is better than an ordinary one.
But what should be mandatory? Now some little things and details will be listed:
A little advice. Label storage boxes for small parts and tools. Then it will be much easier to find the object you need.
Heating
For many people, heating is very important. In winter, when most garages high humidity, it will be hard work. So think about heating.
Those who are not particularly bothered by the cold prefer insulating the walls and ceiling in the garage. Then the temperature will not drop below zero. But there are people who are not used to working at low temperatures. What should they do? There are several solutions:
Many are inclined to another option, since electricity is expensive, and firewood can be bought cheaply.
Bottom line
Setting up a garage with your own hands is not easy, but if you approach such work responsibly, the result will justify this small expenditure of money and energy. Various videos on the Internet will help you in your work, don’t be lazy to look for answers to your questions. An equipped garage will contribute to the speed of work.
If you are the owner of a car and like to always keep it in order, then you simply need a garage. After all, for a responsible car owner, car care can take several hours a day, and all this time you will be under open air not very convenient, especially if the weather is not very good. Moreover, the garage is not only a room for repairing and keeping the car clean, but also a place that allows you to store a large number of tools and things that are rarely used in the main house. If your long-standing dream is a comfortable and beautiful arrangement garage inside with your own hands, then our article is just for you!
How to arrange the inside of a garage with your own hands: photos and useful tips
It's no secret that for many males, a garage is not only a workshop and tool storage, but also soulful place, where you can be alone with yourself, listen to your favorite music while doing minor car repairs, and just sit in the evening with friends in a pleasant company. That is why it is so important for a man that the arrangement of the garage is comfortable, and that the interior is beautiful and pleasing to the eye. And the best part is that all the finishing of the garage inside will be done by yourself! After all, this is both a reason for pride and great savings. And so as not to forget anything when arranging and decorating the garage, we will consider in this article the most important aspects and show you a few photos of the most successful interior designs.
Planning
Before you begin selecting a design and finishing, you need to study several important factors, such as:
Material selection
To do the finishing yourself you need follow the basic rules, which are presented to the materials. Namely:
- maximum ease of care;
- absolute non-flammability;
- resistance to pollution of any kind, be it chemical or mechanical;
- environmental cleanliness;
- wear resistance.
If the garage is important to you not only as a place for car repairs, but also as a place to relax and meet with friends, then you will have to fork out for beautiful and functional materials. There are several ways interior decoration garage space. We will focus on the most popular ones and those that meet the maximum number of requirements.
Plaster. Enough a budget option, which will allow you not only to level the walls, but also, if desired, to give them a decorative relief. To avoid cracking, it is necessary to cover it with a layer of special paint.
Lining. It is very convenient for insulating a room, since it is easy to hide any insulating material behind it. The most fireproof and waterproof material from which lining can be made is polyvinyl chloride. But this option has a significant disadvantage - fragility. Any blow, especially with something sharp and heavy, will certainly lead to damage to it, and as a result, replacement of the socket.
Ceramic tile. Laying tiles is a more expensive and energy-intensive process. But it is very easy to wash and will last you at least ten years. Moreover, it is fireproof, as it does not burn at all, which is very important when working with flammable liquids and materials.
It is very important to think through floor material, as it must withstand the heavy weight of the machine, shelving and accidentally dropped tools. Fire safety and water resistance are also one of the main requirements. The most common option is reinforced mesh, poured with concrete. This floor will withstand any spilled liquid, heavy loads and meets all safety standards. For more beautiful view you can use self-leveling floors. Be sure to consider a drainage system to avoid the accumulation of liquid and subsequent mold.
To maintain order when storing and using tools and materials the best solution will construction of racks and shelves. Today, construction supermarkets offer a wide range of ready-made shelving, but their price and size may not always satisfy you. Therefore, an excellent option would be to make them yourself; besides, it is not so difficult. First, determine the number and size of all your tools, as well as things that are simply stored in the garage. Make the necessary markings and begin building the shelving.
For ease of cleaning, the bottom shelf is mounted no lower than twenty centimeters from the floor. It is better to perforate all shelves - this will make it easier to keep them in order and prevent them from rotting or rusting. The base of the rack is made of metal profile, and the shelves are made of treated boards or plywood. When there is not enough space for a large number of racks and shelves, mounting hooks are often used. Tool shields are very convenient to use. This option is especially good for placing garden supplies, stepladders, sports equipment and other frequently used items.
When arranging a garage space an important aspect is ventilation. Its task is to clean the air from toxic and unpleasant fumes of various automobile fluids and exhaust gases. It can be either natural - holes near the gate at a height of about twenty centimeters from the top, or forced - installation of special fans connected to the exhaust pipe.
Interior design selection
It’s great if you can afford a large space for a garage, but it also happens that there is very little space, but it should have very wide functionality. But in both cases, you want to see not just a gray concrete floor and plain plastered walls, but cozy corner, where you can happily spend time doing repairs or other things.
That is why you need to equip your garage with all your heart and imagination. And if you don’t have many ideas of your own, then in this section we invite you to draw inspiration from photos of garages of various sizes. Check out the interior design using a few photos as examples and you will probably come up with dozens of ideas in your head on how to make your garage cozy with your own hands.
For a car enthusiast, a garage is a place where he spends a lot of time, and therefore it should be comfortable and convenient. How to arrange a garage with your own hands? Let's find out below.
order in the garage
To implement the planned project, it is important to consider several points:
- First of all, the microclimate is important. Air humidity and temperature must be normal.
- The space should not be too limited. An owner who plans to spend a lot of time in his favorite workshop should have enough space for repairs and for free movement to the racks and workbench.
- It is necessary to organize a system for quickly warming up the room so that winter time I didn’t have to freeze for long.
- To ensure the safety of everything hidden behind the garage door, you should take care reliable system protection from intruders.
Following all the rules ensures that your stay in the garage will be not only pleasant, but also effective.
heater in garage
Premises arrangement plan
Before you build a garage inside with your own hands, you need to design it inner space. To do this, you should draw up a preliminary arrangement plan. It provides:
- drawing up a diagram of the location of the main elements;
- creating a construction plan;
- drawing a sketch that reflects three geometric components: height, width and length.
Important! In addition to the design and internal arrangement, it is necessary to choose the type garage doors with optimal opening type.
When developing internal equipment, you need to take into account other nuances:
- The location of the car indoors is also selected, and the free space around the car is calculated to ensure the ability to carry out technical manipulations.
- Next you need to decide on the set necessary equipment and furniture.
- An important component is the choice of the type of finishing and thermal insulation materials. As a final stage, an estimate of future costs for construction and finishing works.
garage plan
Garage interior decoration
The garage owner should think about how to equip the garage inside. Properly selected material will prevent accumulation construction dust, various contaminants and protect the structure from premature failure.
Floors are most often made from concrete slabs. To prevent harmful effects chemical reagents and dirt, the floor must be treated with a special mastic.
- The flooring can be tiles or specialized parquet.
- Ceilings and walls can be plastered.
Cladding with metal sheets, clapboard or plasterboard is also suitable for ceilings, and clapboard or tiles for walls.
When selecting material for interior decoration of a garage, it is necessary to take into account that it must have the following qualities:
- non-flammability;
- resistance to mechanical damage;
- high degree of resistance to chemicals;
- ease of care.
To ensure a comfortable climate, you need to take care of the thermal insulation of the walls. For this use:
- Styrofoam;
- mineral wool;
- special panels.
To secure the insulating layer, it is necessary to create a frame from bars or a profile fixed to the walls and ceiling. Insulation material is placed into the resulting niches.
internal preparation
Organization of the work area
How to properly arrange a garage? Proper organization of space involves dividing it into functional zones. There are a number of points without which the garage itself is impossible.
These include:
- inspection hole;
- workbench or other work surface;
- shelves or a closet for storing clothes, tools and small parts.
Organization of inspection pit
Those who repair or maintain the car themselves must provide an inspection hole. When planning it, it should be taken into account that the walls must be concrete, and the edges of the pit itself must be reinforced with metal corners.
Attention! When organizing an inspection pit, you should provide a drainage hole in the corner of the pit into which water that falls down will be drained. It is better to cover it from above with a grill so as not to provoke a fall.
It is also necessary to take into account the terrain. Otherwise, there may be places where the pit is constantly flooded. For the convenience of working under the bottom, the best option would be to organize a small corner in which a minimum set of tools will be stored. You also need to organize lighting for the pit.
A workbench is a convenient and functional element of the garage interior, especially if you plan to set up a carpentry workshop in the garage. Its height must correspond to the height of the person who will work on it. You can make it yourself from metal sheet and profile pipe.
The cabinet seems bulky for the garage. However, a product of small width will allow you to place a change of clothes, shoes, gloves and other small items there. It can also be metal if it is appropriate in the overall interior.
inspection hole
Shelving and other necessary furniture
For a garage, metal or plastic furniture. Various modular systems with grids for small items, shelves and cabinets allow you to not only conveniently, but also beautifully organize working space. Among the necessary items it is worth highlighting:
- Desktop;
- cabinets;
- stool;
- shelves.
A master cannot do without a large number of different parts and tools needed to repair a car. Convenient option A rack is considered to be used for storing tools. It usually does not take up much space, but at the same time allows you to place the maximum number of necessary items in a limited space.
Shelving
Selection of equipment for the garage
An organized workshop in a garage with your own hands requires not only a certain set of furniture. Car enthusiasts cannot do without a standard set of equipment that may be useful for performing repair work. The kit should include:
- Standard set of keys, sockets and screwdrivers.
- A jack that adjusts to the weight of the car.
- Crafting table. It can be either metal or combined. Numerous drawers can accommodate everything you need for daily care for a car.
- Welding machine. Since there are dozens of varieties on the market (electronic devices, carbon dioxide devices, devices with a tungsten electrode), when choosing, you need to base your choice on the purpose of the unit.
- Compressor. You can’t do without it when preparing a car for painting and in the process itself. It is also used to clean the workbench and tools. It allows you to bleed the engine or pump up deflated tires.
- Water-oil separator. It filters the air flow transmitted to the atomizer from water, oil, vapors and other small particles. Provides a purified stream of paint, which allows you to apply the most even layer.
- Autonomous car wash. Modern units allow you to save time on cleaning your car. They are powerful, compact and mobile. However, if you do not have the funds to purchase them, you can use the supplied water supply to periodically wash the car.
Purchasing the entire set of equipment is not mandatory. Everyone selects a set to suit their needs and capabilities.
Workbenches in the garage
Engineering communications device
- To prevent moisture from melting snow or other precipitation from accumulating in the garage, care should be taken to organize a drainage system. Toward the exit, the floor should be slightly inclined, and along the edges of the room it is better to make drains into the storm network.
- Since cars are associated with unpleasant technical odors, it is best to make a powerful ventilation system to remove dirty air outside the room.
- Car wash. If it is not possible to equip a professional chamber, it is enough to install a water supply system in the garage, and organize a “sand trap” connected to the central system sewerage.
- Lighting in the garage can be combined. It can be: wall-mounted, ceiling-mounted and portable. These can be lamps, lamps, lanterns and spotlights. Wiring is most often external, since organizing internal wiring is more expensive and labor-intensive.
Conclusion
Equipping a garage with your own hands is a painstaking task. But by doing everything yourself, you can be sure of a reliable result.
Hello, dear friends! Tell me, what does your garage look like? Can it be called an ideal refuge for a four-wheeled horse, or is it a warehouse where it is almost impossible to find even all the essentials?
Indeed, the problem of clutter in garages is very relevant and widespread. Today I propose to discuss arranging a garage with your own hands. Let's consider several options of what can be done, how to properly organize the workplace, making everything quite simple and beautiful.
In fact, there are many ideas of what you can do in your own garage. And these ideas are drawn from the vastness of YouTube, Drive2 and other automotive communities. Arranging a garage is a kind of tuning. It will only be about what surrounds your car.
Let's start with zoning
Even if there is small room you can make a sample of an ideal workshop, where there is space for a workbench, an inspection pit and even a small seating area.
Quite often, car owners have at their disposal a car storage space with dimensions of 3x6 or 6x4 meters. This is a stone garage in a cooperative, or a variation of a metal quick-dismounting garage, which is often used in the country and in private homes. But I’ll say right away that metal garages not the most convenient and practical. It's incredibly cold there in the winter, and outrageously hot in the summer due to the heating of the metal.
The garage can be compared to the rooms in your house or apartment. Therefore, the issue of zoning should be approached extremely carefully.
Before equipping a garage and buying everything for repairs and arrangement, I advise you to take into account several zoning rules.
Here you should pay attention to the following points:
- Availability of a passage area. A permanent free passage should be provided here. This is where the items you take with you when leaving the garage are located. That is, clothes, keys, personal belongings;
- Easy access. Another area where all the most necessary and most frequently used things, objects, tools and devices are located;
- Long, thin and tall objects. These include gardening supplies, shovels, and cleaning products in and around the garage. Provide a separate area for them with a fairly convenient passage;
- Area for large items. These are all things that you rarely use. The ideal solution will be the organization of a mezzanine or hanging systems;
- Area for frequently used items. The more often you need them, the closer they should be located to you;
- Working space. If you have machines or do some kind of hobby in the garage, be sure to allocate a separate area for it.
For clarity, you can study various photos and video materials, understand the principles of zoning and apply them to your garage.
Useful and interesting design ideas
Separately, I would like to consider a few interesting ideas, which are aimed at creating the most comfortable, practical and convenient garage.
Not everyone knows, but the concept of a garage comes from French, and means pier or harbor. Agree, it sounds quite symbolic and explains a lot to the wives of those men who like to spend a lot of time in the garage. At the same time, they don’t just go there because they need to fix their car, change tires or replace consumables. This is a way to relax and escape from the daily routine. Therefore, such hobbies should be supported and encouraged. But this does not apply to daily gatherings with friends in the garage.
And in order for your harbor to be comfortable, tidy, always pleasing to the eye and soothing your soul, you need to create the appropriate conditions inside.
I suggest doing this using:
- magnetic tapes;
- hanging jars;
- perforated panels;
- bike racks;
- labels;
- open shelves;
- your hands;
- own imagination;
- personal needs.
If you put it all together, you get a rather harmonious and practical interior in the garage. Don't be afraid to apply such concepts to a space that some perceive as a warehouse. With some effort, your garage will become much more than just a place to store your car.
Now let’s take a separate look at all the presented arrangement ideas.
Magnets are our everything
The garage provides for the use of copious amounts metal objects. And many of them have small sizes, are constantly needed at hand, but every now and then they get lost.
To solve this problem, you can use magnetic strips or tapes. This is a real find for storing various tools, brushes with metal hands and other objects within reach and visibility. Such strips are installed on walls, thereby saving space in cabinets, drawers and shelving. It is optimal to place magnets near the work area, in the workbench area and above the shelving. It is better to keep the tapes at eye level or slightly higher.
You understand that hanging ribbons close to the floor makes no sense. Having applied this idea in the garage, you will probably want to install magnetic holders at home in the kitchen.
Perforated panels
An excellent way out of the situation for those who want to equip their own garage, but at the same time suffer from an abundance of small and medium-sized tools. They are constantly needed, but it is difficult to find them among all the rubbish.
Special perforated boards are available for sale, which can often be seen in American garages. Extremely successful and convenient idea, which allows using hooks, nylon holders and other fastening systems to place tools and accessories in a minimum space. Since the panel is hung on the wall and has many perforations, literally every centimeter of space will be used wisely.
It is most correct to install panels in work area, where your garage workbench is located.
Bicycle racks
If you are a bike lover and you have a whole arsenal of two-wheeled vehicles in your garage, then you can wisely use old pallets. They make excellent stands.
The idea of arrangement comes down to installing a couple of pallets in an L shape. The result will be an opening for bicycles, which will be quietly held without stands.
Also, the gap between the boards is enough to accommodate a scooter or city bike. If you want to improve appearance racks, sand them, cover them with varnish or paint in several layers.
Jars on the walls
Hanging cans look very advantageous in the interior of a garage. But their main advantage is high level practicality and ease of use.
I have already seen several times how cans were hung on the walls under shelves. Their purpose is quite obvious. This is storage for various bolts, nuts, self-tapping screws, studs, washers, nails, etc. Everything that can be useful in the process of work.
Remember how difficult it is to constantly open cans with one hand, since the other is busy holding some kind of tool or material. Essentially, you will need several plastic containers, which are fixed on the wall in a certain sequence convenient for you. They are filled with various fasteners.
These actual jars eliminate the need to store them on shelves and racks, sort and constantly sort through them. You have a clear sequence and a certain number of hanging containers. You will always know where everything is, how much of it is left and where you need to reach to get the necessary screw or some kind of washer for the bolt and nut you are using.
Open shelves
It is best to use shelves in the garage open type. Let it seem to you that closed doors look more presentable or more interesting. Here you need to judge from the standpoint of practicality and convenience.
By having open shelves that go with all the previous arrangement ideas, you will always know where everything is and is. It is optimal to use removable structures.
If you use closed shelves, drawers and boxes to store garage supplies, I highly recommend labeling them and using labels. This is a real salvation in situations when you are trying to find the necessary things and objects, but forgot where you put them after the next cleaning.
Proper arrangement of the inside of the garage with your own hands is a process that is carried out immediately after the construction of its walls and roof. At first glance, this is a fairly simple procedure that does not require a special approach. However, many car enthusiasts are lost when faced with the problem of how to equip the inside of a garage with their own hands. It is especially difficult for those who own a rather cramped room measuring 6 x 4 x 2.5 m. There is barely enough space in it to park a car. I would like to place in the garage spare parts, tools and various household items, the need for which arises from time to time. Let's look at the main ways to equip a garage so that it turns into a comfortable and multifunctional room where you can spend hours doing a wide variety of work.
Interior finishing options
Improvement of the garage must begin with its insulation and interior decoration. If this is not done, there will be dampness in the room and mold and mildew will develop.
Let's consider the methods and materials with which you can decorate and insulate a garage with your own hands:
Floor. Typically used as a base reinforced concrete slab. You can insulate it from the dampness and cold of the earth with polystyrene foam or coarse expanded clay. Do not forget about the external cladding of concrete. The best option is the arrangement of a heated floor, on top of which porcelain stoneware or corrugated steel sheets. More in a fast way To prepare the floor for use is to polish the concrete and treat it with special penetrating impregnations.
Walls. In order not to reduce the already small volume of the garage, you should use thin Decoration Materials with low thermal conductivity. Styrofoam covered with thick waterproof plywood works well for sheathing steel panels. Brick and aerated concrete walls better to cover facade plaster. This material has decent strength and very low thermal conductivity due to the presence of special fillers and plasticizers in its composition.
Ceiling. When setting up a garage with your own hands, you should remember that this is a fire-hazardous room. When choosing a material for ceiling cladding, you should choose plasterboard boards. You can lay wiring over them and ventilation ducts. Drywall after installation on steel frame primed, puttied and coated acrylic paint. It’s even easier and faster to build a steel frame, put slabs of stone wool and cover it with corrugated board.
After completing the finishing work, you can proceed to planning interior decoration garage. In this building, its owner will have to spend many hours doing a wide variety of things. Therefore, arrange your garage so that staying in it is convenient and comfortable.
Planning functional areas
Correct zoning in a garage is no less important than for any residential or office space. Its functionality will depend on how well the garage space is distributed. The optimal division of the area into zones will make it possible to place various cabinets, racks, shelves and equipment for the garage.
Zones with the following purposes should be distinguished:
Car parking. It does not necessarily have to be in the geometric middle of the garage. The machine can be placed close to one wall or in a corner. The parking place should be chosen so that the nearest piece of furniture is at least 50 cm away. To avoid accidentally hitting a wall when parking, install a durable wheel bumper.
Passage place. It will be installed directly at the entrance. Large objects that will interfere with passage should not be placed in this area. The optimal option for arranging a passage area is to install small hallway which can be used for storage outerwear, umbrellas, shoes, keys and documents.
Quick Access Zone. This is a place that is easy to reach without using a stepladder or moving large items. It is advisable to arrange it in the form open shelving. Things that are used every day are placed on it. This could be purchases from the store, groceries, towels and rags, dishes, necessary household chemicals.
Space for long and thin items V. A small and narrow rack can hold shovels, brooms, scythes and other equipment used for work inside and outside the garage. Another option for a storage device is to install hangers above the entrance or against the far wall.
Storage for large items. It is installed in one of the corners of the room. This includes items that are rarely used or only used during a certain season. It could be faux Christmas tree, camping equipment or folding furniture to accommodate guests.
Storage for fuel, oil and lubricants. Best suited for this metal cabinet with sealed doors. Old refrigerators are a good option.
There should be a workshop in the garage. Every person has a hobby. In addition, a large number of different devices may be needed to repair a car.
To combine the ability to perform diverse tasks, you need to install a wide workbench on which it will be convenient to work with any tools. This way the craftsman will be able to use the interior space to make crafts, souvenirs and car parts.
Garage tools and equipment
In order to carry out landscaping of the garage, it is necessary to purchase various devices and fixtures. Subsequently, they will come in handy more than once for performing a wide variety of work.
The garage needs to be equipped with:
Standard set of tools. This set should include wrenches of all types and sizes, a vice and a jack. It is advisable to purchase all devices from a trusted manufacturer.
Workbench. You can make it yourself or buy a finished product the right size. In order for the workbench to last a long time, it is advisable to upholster its tabletop sheet iron.
Welding machine . It is better to have an electric unit of sufficient power. Such equipment is completely safe; it can be used to repair a garage, restore gates and doors, and make cabinets and shelves.
Air purifier. Such a device removes dust, tiny particles of fuel and oil from the air. The purifier is needed to ensure high-quality painting metal and creating a comfortable microclimate in the room.
Steel sink. Car maintenance involves removing many parts and cleaning them from oil, dirt and carbon deposits. It is advisable to install a hood above the container to remove it from the room volatile compounds petroleum products. The sink must be equipped with a drain to collect dirty liquid.
Separately, it is worth dwelling on the furniture. An equipped garage will only be considered as such if it has a sufficient amount of compact and functional furniture.
How to choose shelves and racks
The garage is in most cases a station Maintenance, warehouse and workshop at the same time. The abundance of various property requires quite a lot of storage space. And all this needs to be placed in a limited space. There are several options for arranging a room with furniture so that it does not interfere with free movement and the performance of various works.
There are the following solutions for arranging a garage:
Closed cabinets under the ceiling. This technique allows you to make maximum use of space that usually remains unclaimed. The lower part of the shelves can be used as a base for lamps, lamps and LED strips. For ease of access, it is better to equip lockers sliding doors.
Open shelves on the walls. Such devices allow you not only to place a lot of property on them, but also to quickly find what you need, since everything is in plain sight. It is advisable to use prefabricated shelf models in order to be able to expand, reduce or dismantle them for cleaning and repair.
Wardrobes. This is very comfortable furniture, which has proven itself when used in cramped conditions. An alternative to doors on rollers are roller shutters. They allow you to access the entire cabinet space without taking away useful space.
A very useful gadget for the garage would be folding tables on casters. They will complement the workspace during renovations and serve as a gathering place for friends during relaxation.
Little design tricks
There are so many different things stored in the garage that car enthusiasts often forget where and what they have. In many cases there is also a shortage free space.
To expand your living space and avoid confusion, it is recommended to use the following techniques:
Label all shelves, doors and boxes. Avoid writing directly on furniture. It is better to stick an adhesive plaster or white one on the products masking tape. Inscriptions must be made with a black marker, in large block letters and without abbreviations. Such marking will greatly facilitate the search for the necessary property and organize its storage.
Use magnetic stripes. It's inexpensive, but very useful device. It is convenient to attach tools and parts containing iron to it. In the process of performing any work, tools, small parts, bolts and nuts are fixed on magnetic strips. It is recommended to install magnetic strips above tables, workbenches and near the entrance.
Attach to walls perforated panels . With the help of these devices you can maintain order in the workplace during repairs or creativity. It is convenient to attach an awl and screwdrivers, bolts and screws, hooks and scissors in the holes. Hangers and fixtures for lamps can be screwed into the holes.
Hang several clear plastic containers over your workbench.. They are convenient for storing various repair tools or using them as containers for consumables.
Almost every family has a bicycle. With the storage of this vehicle There are always certain problems that arise. They can be easily solved by hanging the bike on a free section of the wall on hooks or on hangers from the ceiling.
Garage ventilation and lighting
Quite often, motorists do not pay due attention to these issues. This is big mistake.
High-quality ventilation allows you to rid the room of moisture, unpleasant odors and harmful fumes. There are options for supply and forced ventilation. In the first case, holes are made in the lower part of the gate and under the ceiling of the building. The holes are closed with a grill. The installation of an exhaust pipe 1-2 m high helps to increase draft. The forced system involves installing a powerful exhaust fan on the ceiling or at the top of the wall.
As for lighting, it is necessary to install several light sources. Depending on the size of the building, 1-2 lamps with a power of at least 400 W each are fixed to the ceiling. It is advisable to equip every corner of the garage with lamps so as not to search for the necessary property in the dark. One lamp should be installed above the tables and workbench. Be sure to make a carrier to highlight hard-to-reach areas.
Using these recommendations, you can qualitatively equip any garage with your own hands, turning it into a convenient and comfortable room, adapted for activities of any level of complexity and simply a pleasant relaxation.
