There are two types of modern tools - large-sized and so-called small things, which tend to get lost at the most crucial moment. It is for this reason that some of the most popular products in construction stores There are all kinds of boxes and boxes for fasteners and tools. They will be discussed in this article. Together with the site stroisovety.org, we will figure out how to make a tool box with your own hands. We will look at several convenient designs that will not be superfluous in a home workshop.
DIY tool box photo
DIY tool box: where to put large tools
A tool such as a level hand saw, hammer, mallet, etc., in the master’s arsenal represents biggest problem– their dimensions and shape do not allow accurately marking this tool in the workshop. It is also quite problematic in terms of transportation - its sharp edges can easily tear ordinary bags and even ruin factory tool boxes, which, as a rule, are made of fragile plastic. This kind of problem never occurred to our grandfathers. They solved it simply - they took it and put it together from scrap materials homemade box for tools open type, which was distinguished by both durability and ease of use.
Its design looks quite simple - if we exaggerate, then it is an ordinary wooden box with a handle, maximum divided into a couple of compartments. There were craftsmen who managed to install some kind of lid with small sections for fasteners into this box.
Making such a box is quite simple - you will need centimeter-thick boards or plywood and fasteners in the form of nails or self-tapping screws. First, a blank is made - the bottom is cut out, two long sidewalls and two short ones, different from the long sidewalls in their height. In the short sidewalls, at their very top, a slot is made to install the handle. Then all this is assembled into a single box - for a person who has an understanding of carpentry, such a box design will not seem complicated at all.
How to make a toolbox photo
The disadvantage of this design is its narrow focus - such a box is good for large tools, but not for small things. In addition, it is open, which poses some problems during transportation - so it would be a good idea to think about some kind of lid. As an option, you can look at the canvas cover - it will cover the tool and will not make the box heavy.
How to make a tool box: option for small tools and consumables
Tool small size and all kinds of consumables, like no other technical devices, need to be in order - during the work process they must be quickly located and not lost. It is for this reason that the most optimal storage place for such tools is a sectional box with big amount special mounts for certain tools. Such a tool storage box is somewhat more difficult to manufacture, but it will solve quite a lot of problems.
To make such a structure, it is better to abandon boards in favor of 6mm thick plywood. Structurally, this device consists of two shallow boxes (15-20 cm deep each), connected by hinges. When you open this design, you have access to two halves at once, on one of which you can place small retractable drawers with sections for fasteners and small consumables, and on the other you can place small tools using various fasteners. Here you can put screwdrivers, pliers, all kinds of meters, and much more that you can find in your toolkit.
Tool storage box photo
Making tool boxes: DIY organizer
Today, the tool box organizer has the most convenient and optimal design for use - in essence, it is a sliding system of five or seven small drawers, in which you can place both medium-sized tools and a lot of all kinds of small things. Such a box can be called the most difficult to manufacture, but this does not mean that it is not possible to make it yourself. In fact, everything is simple, and difficulties can arise only with sliding mechanism. Let's take a closer look at the design of the tool box organizer. To make it easier to understand the technology of its manufacture, let’s present it point by point.
Tool box organizer photo
As you can see, the mechanism for opening such tools is simple, and doing it yourself is quite possible. The most important point in boxes of similar designs, it is necessary to properly organize it into sections - with a competent approach to the matter, in these sections you can place everything you need for work.
A good toolbox: simplicity is the key to success
To conclude the topic, I will say a few words about the simplest design called a “matryoshka chest” - the design of this product is quite simple and actually resembles a nesting doll. Essentially, this is one large box into which several small ones are inserted. Anyone who knows how to use it can make such a toolkit. modern instrument. The most important thing here is to clearly calculate the sizes of all individual drawers. In addition to its ease of manufacture, this design has other advantages - in this way you can make an arsenal of any size. The main thing here is not to overdo it so that it turns out to be lifting.
By by and large, a tool box can be made with your own hands of any shape and any design - it all depends on your imagination and the availability of free time. Stationary instruments used to equip workshops are quite common. Are no less in demand combined options similar products that can be used both as stationary arsenals and as portable ones - in most cases these are boxes of a transformable design, individual sections of which can simply be removed and taken with you to an away site.
Making tool boxes photo
In general, there is plenty of ground for thought here, and a very large one at that. The most important thing is to think through the design correctly, since a DIY toolbox should, first of all, be comfortable and lightweight. In this regard, plastic factory products are far ahead, but making them at home is almost impossible. Although, who knows, maybe you can solve this problem.
Practical storage systems for the garage or workshop.
For many people, the garage is not only a place to store a car, but also a real automotive, metalworking and carpentry workshop. Therefore, it is important that everything is always at hand and at hand. right place. But sometimes it’s so difficult to understand the variety of screwdrivers, pliers, scissors, drills and other utensils that are stored in “men’s Eden.” This review contains simple and yet effective ideas that will help you create almost ideal storage systems in your garage.
1. Magnetic tape
Magnetic tape for storing small items metal parts.
Magnetic tape pasted on the wall in the garage can be used to drill storage, scissors, bolts, nuts and other small metal parts. Such magnetic holder very convenient to use and will help prevent the loss of small but important spare parts.
2. Plastic containers
Rack made of plastic containers.
From large plastic containers and pieces of wood, you can build a large rack for storing tools, wires, spare parts and any other things. Organizing such a rack will allow you to restore order and significantly save space in your workshop or garage.
3. Rails
Rails for garbage bags and paper towels.
On one of the free walls of the garage you can place several small rails on which you can conveniently place rolls of garbage bags, paper towels, sandpaper, tape, coils of rope and much more.
4. Furniture brackets
Brackets for storing furniture.
Many summer residents use the garage to store folding outdoor furniture. So that it does not stand in the corners and does not take up much space, make a vertical rack for it with wooden or metal brackets and screw it to one of the free walls.
5. Jars
Storage of nails, bolts, screws and other small items.
Bolts, nuts, nails, self-tapping screws, screws and other small things do not take up much space, but storing them mixed is extremely inconvenient. Jars with lids screwed to the bottom of a wall cabinet or under the desktop will help you put these things in order.
6. Ceiling grille
Grid for storing pipes and baseboards.
A plastic grid screwed into the corner of the garage under the ceiling is ideal for storing leftovers. water pipes, skirting boards, profiles and other long things. Such a storage system will help significantly save space in the garage and prevent possible breakdowns of fragile building materials.
7. Organizer for screwdrivers
Wooden organizer for screwdrivers.
A small practical organizer for screwdrivers that any man can make by simply drilling required quantity small holes in a piece of wood. This product can be hung on one of the walls of the garage or workshop to store all the screwdrivers in one place.
8. Vertical storage systems
Vertical panels for storing things.
Some perforated panels made of metal or plywood under a table or in a cabinet will allow you to get an ergonomic and convenient place for vertical storage small hand tools.
9. Plastic pipes
Storage systems made of PVC pipes.
Remains of PVC pipes different diameters can be used to create the most different systems storage For example, pieces of wide pipe screwed to the bottom of the cabinet are suitable for storing a screwdriver, drill and other tools of this type. From pieces of medium-diameter PVC pipes you can make cells for storing various sprays, polyurethane foam, tubes of paint and other containers.
10. Tassels
Hanging storage for brushes.
It is very convenient to store paint brushes and spatulas suspended on a thin wire or on a thin steel rod.
11. Rack for garden tools
Wooden rack for garden tools.
To garden tools did not take up a good third of the garage space, store it on a special rack screwed to one of the walls. You can make such a rack with your own hands from blocks of wood, wooden pallet or pieces of plastic pipes.
12. Multifunctional rack
Pallet rack with shelves.
Wooden pallet complemented by shelves made of pieces wooden slats, will become a functional component of the garage and will help to place a huge amount of hand tools and small ones in one place.
13. Rod holder
Fishing rod storage.
A simple wire lattice can be used to create a convenient fishing rod holder. Such a storage system can be fixed under the ceiling so that it does not take up space below and does not get underfoot during the autumn-winter season.
14. Pegboard
Keeping your workshop tidy is more than just a good habit. By carefully arranging the tools in their places, the master will extend their service life and also reduce the risk of injury in the workplace. Organizers for tools will help you forget about clutter and centuries-old dust. Such devices are sold in stores, and if desired, you can make them yourself.
Classification and purpose
Organizers for tools differ in design, purpose, and mobility (they can be portable or stationary). Experienced craftsmen recommend combining different types organizers when organizing the workspace. Highlight:
- Portable organizers;
- Compact stands;
- Cabinets with drawers-containers, including mobile ones (on wheels);
- Hanging organizers;
- Wall panels.
All of them are used to accommodate cutters, drills, attachments, hand tools, as well as electrical, hydraulic and electro-hydraulic equipment. They are made of fabric (for bags), wood, metal, plastic, fiberglass, textolite. The designs allow for the presence of magnets, rollers, and moving elements. The use of organizers pursues three main goals:
- Workspace optimization;
- Facilitation (acceleration) of work;
- Simplification of transportation.
Hanging structures
Suitable for any room with walls: workshops, garages, loggias, balconies. Wall-mounted tool organizers include panels placed along walls to hold equipment, as well as individual tools that hang on hooks, magnets, or screws.
The attachment completely transfers the load to the wall. Therefore, before proceeding with installation, you should make sure that there is sufficient bearing capacity wall material. This primarily concerns ceramic bricks, porous concrete low density.
The easiest way to make an organizer is from an ordinary wooden board, nailed with the wide side to the wall. Well-bending thin nails are driven into the front side of the board to serve as holders for tools. This design is suitable for placing small hand tools. The main thing is to choose the diameter of the dowels and the thickness of the board so that they can withstand the payload.
IN ready-made options act as retainers powerful magnets located along the entire length of the rail. Magnets can be installed on homemade awnings. They are useful in both primary and auxiliary fastenings. There is no need to drill slots for installation; the magnet can be attached using epoxy glue.
Wall panels are more versatile due to their large area work surface. They are made of metal, wood, plywood, textolite or plastic. The surface can be either perforated or solid. Perforated panels are widely available in construction stores, and they often come with special mounted containers. Versatility is achieved thanks to a fixed hole pitch and removable fasteners.
Solid panels are often assembled by hand. They are easy to use and install - there are no fundamental differences from installing a board organizer. However, large organizers, especially with thin material thickness, are recommended to be mounted on the wall through guides (boards, slats). This principle also applies to perforated panels.
To create a metal organizer, you will need a sheet at least 1 millimeter thick. In this case, it is not at all necessary to buy sheet steel. The basis can be the casing from a failed household appliances: washing or dishwasher, gas oven, microwaves. It is sufficiently thick and, as a rule, covered with high-quality enamel.
The cladding is straightened in places of kinks, forming a single plane. They arrange themselves along the edges mounting strips as wooden planks, fixed at the ends with self-tapping screws. The panel will be hung on the wall using these guides. If necessary, you can add an additional board in the center, as well as vertical elements. It won't give steel sheet“walk” freely while drilling holes and during operation.
Holes are marked on the front side. The step will be greater than larger sizes equipment that is planned to be placed on the organizer. The holes can be arranged either in a cage or in a checkerboard pattern. Recommended grid spacing at which homemade organizer will be compatible with most ready-made hanging holders, is 25 millimeters. For drilling holes, a step drill is best suited: it is well suited for thin metal, does not leave burrs, but is afraid of distortions, so it is better to tilt the panel slightly before work.
It is allowed to combine perforation with solid sections. The central part of the metal perforated panel is allocated for magnetic fasteners, which hold small things: screwdriver bits, small drills, bits, scissors, needle files. The design uses neodymium magnets from broken hard drives.
Remaining free place Suitable for the role of an impromptu board for depicting diagrams and drawings. Small organizers can easily fit in the perforated areas; it is enough to provide them with a reliable fastening. Hanging holders can be made from bent wire using spot welding.
Tool cabinet
Service cabinets occupy large area, how wall panels. Externally, they are not much different from ordinary furniture: cabinets or drawers. The opening principle, the organization of the internal space, as well as the materials used may differ radically from one to another. different models. They can be stationary, mobile (on wheels) or hanging.
Such organizers are safer than wall-mounted ones, since all sharp and heavy objects are kept behind. closed doors. You can store anything you want in service cabinets: small parts to heavy electrical equipment, as well as completely foreign things (dishes, clothing, medicines). Inner space allows the presence of additional containers, retractable elements, magnetic fastenings.
Compact organizers
Ideal for placing small tools, drills, screwdriver bits, and attachments. They can be open (slats, stands) or closed (boxes, suitcases), portable or stationary. These devices are used separately or in conjunction with cabinets or wall organizers.
The most widely available in stores are sliding plastic boxes with special compartments for fasteners. It is possible to make an analogue of such containers yourself, but the product will be larger and heavier. Self-production stands, stands, cases for drills and attachments are easier to use.
Screwdriver stand
It is convenient to store a large number of screwdrivers on a specialized stand. You can assemble such a device yourself. The cork wood stand is light and neat in appearance. You won't need any single nail, all connections are made with glue. To work you will need:
Wall templates are drawn on a computer at a scale of 1:1, printed on paper, cut out and applied to sheets of wood. Mark the outline on the parts, mark the locations of the grooves. Cut with a knife, and the pressing force should not be too strong, otherwise the material will collapse. Holes are marked on the upper edge, pressing them with a small screwdriver or an awl. The diameter of the hole must match the diameter of the tool.
Before gluing, the parts are processed sandpaper, removing pencil marks, irregularities, and jagged edges. Clean surfaces from dust. Glue is applied to all contact surfaces, excess is removed immediately. The workpiece is fixed in place with adhesive tape. correct position and left for 24 hours. After the glue has dried, the surfaces are leveled again and then varnished. If necessary, signatures for each instrument are applied to the dried varnish.
Where to store drill bits
The easiest way to make an organizer for drills is from an ordinary board. It is enough to drill holes of the appropriate diameter and depth. An improvised stand can be complicated by making it multi-level, adding signatures or fastenings to solid areas. If you don’t want to place the drills vertically, then grooves are made instead of holes. The thickness of the grooves is selected according to the diameter of the cutters being placed. This storage method is best suited for drawers small height.
Organizers for drills are easy to make portable; just find a suitable case: a box from an old first aid kit, a case from a video cassette. You just need to securely fasten the holder inside the box so that nothing falls out or rattles.
Separately, it is worth mentioning fabric (leather) organizers and pencil cases. They are suitable not only for storing drills, but also for full-fledged hand tools. The cheapest ones on the market are mobile and universal, but their durability leaves much to be desired. Suitable for cars and hiking conditions.
Almost every man has a set of tools in his home or garage. Therefore, it is worth keeping them in perfect order. He will tell you how best to do this new review. Surely everyone will be able to find in it examples of organizing storage space that interest him.
1. Plastic cans
Trimmed canisters are perfect for storing nails, screws, bolts and nuts. And in order not to dig around for a long time in search of what you need, it is better to label the containers.
2. Wooden shelf
Narrow wooden shelf with holes - a great place to store screwdrivers.
3. Stand
To prevent pliers from being scattered throughout the garage, make a special one for them. wooden stand.
4. Railing
A thin metal rod is perfect for storage paint brushes in limbo.
5. Individual cells
From the leftovers PVC pipes You can make convenient cells for careful storage of small power tools.
6. Wooden shelving
Homemade wooden rack for storage wrenches will allow you to forget forever about the mess and tedious search for the right tool.
7. Open locker
An open wooden cabinet is perfect would be better suited for storage aerosol paints, which are most often randomly scattered in the garage.
8. Mobile stand
A small stand on wheels is perfect for storing hand tools. This rack is very compact and will always allow you to have the right tool at hand.
9. Wooden stand
A stylish wooden stand with a shelf, which is suitable for storing many of the most different instruments. Such a product will not only help organize hand tools, but will also become a real decoration for a man’s monastery.
10. Homemade stand
An unnecessary pallet can be turned into convenient stand for storing garden tools, which often take up a lot of space in the garage.
11. Hanger
Simple wooden block with metal hooks will forever solve the problem of storing power tools.
12. Clothes hangers
Simple manipulations with an ordinary clothes hanger will turn it into convenient organizer for storing electrical tape and adhesive tape.
13. Storage system
Forks, shovels, rakes, etc. garden tools not very stable and also takes up a lot of space in the garage. Reliable wooden hooks on the walls will help you correctly place garden tools along the walls of your garage or shed.
14. Folding table
Homemade folding table made of wood and a wall rack for storing hand tools is an amazing idea for small garage owners.
15. Glass jars
Ordinary glass jars with metal lids are perfect for storing various small items. For greater convenience and reliability, the lids of the cans should be screwed to the shelves.
16. Vertical storage
The average garage looks quite cluttered. Proper organization of storage systems will help solve this problem. Instead of another closet, equip the walls with various shelves and hooks, which will allow you to neatly place a variety of things, from tools to a huge boat and bicycles.
17. Magnets
Magnetic tape or individual small magnets - great idea for storing bits for screwdrivers, drills and other small metal parts.
Continuing the topic, we’ll tell you about anywhere.
Working tools must be stored in proper conditions so that they do not get lost or become damaged. For complete storage of small keys, screwdrivers, fasteners and other items, you can make convenient boxes where each item will be in its place. Making an organizer box is not difficult; any available material is suitable for this - thick cardboard, leatherette, plywood, boards.
Figure 1. The organizer allows you to keep your tools clean and tidy.
Cardboard boxes
You can make a convenient organizer for tools from ordinary cardboard box medium size. The box should be chosen from thick cardboard with a corrugated layer, since this material is more durable. If you only have thin cardboard, you need to glue 2, 3 or 4 layers together, depending on the weight of the tools for which the box is being prepared.
During the work you will additionally need:
- ruler, preferably transparent;
- stationery knife;
- scissors;
- pencil;
- glue gun;
- scotch;
- material for decoration.
First, make markings for the base of the organizer: take a rectangular sheet of cardboard 30x40 cm, step back 5 cm from the edge and use a ruler to draw straight lines parallel to the sides of the sheet. The lines should cross the cardboard completely, from edge to edge. Then the cardboard must be bent along the lines, cutting at the corners. The workpiece easily folds into a box of small depth.
Angles connect glue gun, and for greater strength, the product is wrapped with tape around the perimeter. Now you need to make 3 more boxes with a width of 10 and a length of 20 cm. The height of the boxes should differ by at least 10 cm.
Fold and fasten them in the same way as the base. The finished boxes are covered with bright or white paper, and then an organizer is assembled from them: first the tallest box is inserted into the base box, then the middle one, and finally the lowest one.
Each of them should fit very tightly; To prevent the product from falling apart, the walls of the boxes must be coated with glue. You can cover the top of the organizer with oilcloth or decorative film, then the surface can be easily cleaned of dirt. This craft is suitable for small tools with light weight, but if the tools are quite heavy, you can make the same thing from thin plywood or fiberboard, increasing the size several times.
Return to contents
Wall Mounted Tool Storage
It is very convenient when tools take up little space and are always in sight. The best option to place them - wall organizer. It can be made from scrap materials; it takes very little time to make. The dimensions of the product are selected depending on the number of tools, and the manufacturing process is very simple. To work you will need:
- a piece of high-density canvas or durable leatherette;
- scissors;
- pencil;
- threads, needle;
- wide, tight elastic band or braid.
The canvas is laid out on the table and leveled. To avoid material shifting during marking, you can attach the edges with buttons. The tools are laid out on the canvas and traced with a pencil or pen. After this, pieces of braid are sewn along the markings, which will hold the instruments suspended.
The braid is sewn on in the form of neat loops; The edges must be folded to avoid fraying.
Finally, the canvas is removed from the table, the edges are trimmed with the same braid and loops are attached to the back (Fig. 2). To prevent the homemade organizer from sagging, you can bend the top edge of the canvas by 3 cm and stitch it, and then insert a thin wooden strip inside. In this case, the device will be attached to the wall using self-tapping screws. You can create a practical and inexpensive organizer from trimmed plastic bottles, securing them to a stand made of plywood or chipboard, then heavier objects can be placed in it. To ensure that the tool box lasts as long as possible, the compartments should not be packed very tightly. Each subject should have its own section; sharp tools should be placed with their handles facing down to avoid damaging the organizer. For small parts, it is better to create shallow sections where everything will be visible. A self-created organizer will greatly simplify your work and save you from lengthy searches for the right tool.
