Even a novice craftsman can make a table from scrap materials. But before assembling a coffee table with your own hands, it is better to review the drawings and diagrams in advance. This will allow you to decide on the shape of future furniture and cut off too complex options.
DIY drawings and diagrams of coffee tables
It is comfortable, lightweight and versatile. To make the frame rigid, the underframe is assembled from legs and a drawer - a rectangle that connects the legs and supports the tabletop. Otherwise, the legs will move apart and the table will lose its stability.
At the same time, the complexity of assembly does not increase much, but now you can store books, notebooks or other trinkets in the coffee table.
A special feature of this design is the absence of legs - they are replaced by four sidewalls, to which a ready-made folding mechanism is attached from the inside. It is fixed to it on a short pair of supports wide board- an underframe, and a double tabletop is attached to high supports, which, when unfolded, rests on the underframe.
Magazine table made of PVC pipes
The simplest and most economical, but very original version coffee table - make it from plastic pipes. The shape and height depend only on your wild imagination. It might be small round table, performing the function bedside table or a full-fledged coffee table with a glass top.
To create it you will need:
- pipes of two diameters - thicker for the legs and narrower for the base, for example, 16 and 9 mm;
- glue gun or tube of transparent superglue;
- medium grit sandpaper;
- a hacksaw for cutting plastic pipes (can be replaced with a wood saw);
- acrylic paint to hide the printed markings on the pipes.
The process itself is incredibly simple:
- Cylinders are cut to the selected length. 4 legs are made from a thick pipe - their length will be equal to the height of the future table (40-50 cm). 30 short cylinders are cut from a narrow pipe, on average 10-15 cm (depending on the shape of the table, the number can be changed).
- You need to start assembling the base from the center - this way there will definitely not be large gaps between the cylinders. Glue is applied to the entire surface of the contacting pipes. A little trick - to accurately glue the cylinders, liquid superglue is poured from the end of the pipes so that it flows down along the entire length of the joint. Glue gun the joints are simply processed from the outside - after painting they will become invisible.
- When the desired shape is achieved, the legs are glued - you need to make sure that the diagonal distance between them is equal. Otherwise, the table will fall over on one side.
- The final stage is painting. The easiest way to do this is with an aerosol method, although you can also use a simple paint brush.
When installing a glass top on your table, you should choose strained glass 10 mm thick. To prevent the removable tabletop from sliding on the base, use silicone shock absorbers for furniture.
If a permanent tabletop is planned, it is fixed with transparent silicone glue.
DIY wooden coffee table assembly
For fans classic style there is nothing better than a wooden table. For this you will need to stock up:
- planed timber 40x40 mm - for legs;
- planed board 50x20 mm - for the drawer;
- ready-made countertop furniture board 800x400 mm (but MDF or plywood will also work);
- use wood putty to fill the holes from the screws;
- sandpaper or use a sanding attachment on a drill to process wood;
- varnish or paint - for finishing table
The tools you will need are a screwdriver (or screwdriver), a wood saw and a drill. After cutting the block into legs, and the boards into the frame, the assembly of the table itself begins:
- The underframe is assembled first. For convenience and ease of assembly, everything is done upside down. The sides are attached to the legs obliquely with self-tapping screws through pre- drilled holes. But it is also possible metal corners, if aesthetics are not so important.
Wooden tables are made not only from planed wood. If you have minimal skills in working with wood, you can create original furniture even from firewood. For example, by selecting a wooden block of suitable height and a couple of thick Y-shaped branches, working a little with a sanding attachment and covering everything with varnish, you will get an excellent massive coffee table for the dacha.
And if after building a house there are several euro pallets left, there is no need to rush to dispose of them. This is an almost finished table!
It is enough to sand and stain the surface, place them one on top of the other and securely connect them together. And to make the table mobile, 4 wheels are screwed onto the bottom, 2 of which have brakes.
Decorating a coffee table with epoxy resin
If there is a sawmill nearby and you can get a sawn board there for next to nothing big amount defects - just wonderful! It is from such materials that the most beautiful tables, decorated with epoxy resin.
The process is labor-intensive, but not too complicated:
- The cut board is glued with wood glue into the tabletop. Smooth boards must be placed under the clamps for uniform fixation.
- After the glue has completely dried, the tabletop is sanded, all cracks and holes from knots are cleaned. Before application epoxy resin the surface must be cleaned of dust and small chips.
- To make the table glow effectively, use luminescent paint in powder. For 2 l ready solution resin you need about 100 g of paint. The resin and hardener are mixed 1:1, the dose should be measured accurately and so that the hand does not tremble. If you overdo it with the hardener, the resin will crack, while too little hardener will prolong the hardening period.
This tabletop is suitable for both a coffee table in the living room of a cottage and in the bedroom of a city apartment.
If you have a few meters of wooden blocks left at home, you can even make a table out of them! The video shows in detail and clearly how to make an unusual designer furniture from construction remains:
Coffee table ik - at first glance, not the most necessary furniture. Therefore, its acquisition is endlessly postponed.
But it is precisely such items that make the interior truly cozy and comfortable. Therefore, we are sharing ideas that will tell you how to make a stylish coffee table with your own hands and not go broke.
1. Democratic and accessible
Table made of boards and boxes.
To make such a table you will need a pair of metal or plastic boxes and two large boards. Don't forget to fasten the structure securely.
2. For the smartest
Elegant mini table.
Books with beautiful covers and small glass for the table top are all the materials for such a coffee table. The books must be glued together, and the glass can be fixed to them using silicone glue, which becomes transparent after drying.
3. Ordered chaos
Original do-it-yourself coffee table.
Coffee table from flat elements, fastened together in a chaotic manner - an idea that is easy to implement. Will fit wooden cuts, parts of boards, large books. 
Table made of wooden cuts.
4. Industrial style
An industrial cable reel can become a table.
A reel for industrial cables is a thing that cannot be found on every corner. But if you are lucky enough to become the owner of this item, it can be used to make an excellent coffee table. 
Functional coffee table.
5. Table for car enthusiasts
Reliable tire table.
A coffee table made from a car tire will last long years. But it is advisable to use the tire without damage. All that remains is to paint it, secure the tabletop and legs.
6. Wooden table almost free
You can make a coffee table with your own hands from pallets.
Ordinary pallets, which can be purchased for pennies, are an excellent material for making furniture. A little imagination, and the wooden coffee table is ready.
7. Second life for old boxes
Large drawers are the basis for a coffee table.
Another way to become the owner of a coffee table from natural wood- this is to use old boxes as material for its manufacture. Four large drawers fastened together form a stylish desk.
8. Extravagant chic
Asymmetrical coffee table.
A coffee table with asymmetrical legs looks especially original, but at the same time luxurious. The tabletop is made of a thick board or a wooden cut.
9. From the dacha to the living room
Barrel table.
Big wooden barrel Easily converts into a coffee table. It must be cut into two parts, and then the table top and legs must be attached to one of them.
10. Spacious and functional table out of the box
Functional table out of the box.
A utility box made of plastic or wood can also be used as a coffee table. To make the table mobile, you can attach small wheels to its bottom.
11. Warm table
Furniture made of metal radiator.
Old heating radiator – solid foundation, which will help you make a coffee table with your own hands. You just need to paint it in desired color, attach the wheels and place thick glass on top.
12. From the interior door
An old door can also come in handy.
An interior door that has served its purpose becomes a material for making a coffee table with your own hands. It must be cut into several parts and fastened together.
13. If it’s a pity to quit and it’s hard to carry
Coffee table from a suitcase.
An old suitcase can become an original tabletop for a coffee table. You just need to attach the legs to it.
14. Brutal elegance
Original legs made of pipes.
An affordable option for making legs for a coffee table is ordinary plastic or metal pipes, connected to each other by fittings. This furniture will fit perfectly into a loft-style interior.
15. From ordinary wooden beams
Wooden table made of timber.
A wooden beam, folded in a checkerboard pattern, will become a tabletop for a homemade coffee table. The legs can be made from thick metal wire.
It's hard to be a fan design solutions For home furniture, while not having enough available funds to purchase them. The point is not only in the level of your income, but also in the price tags that are typical for such furniture, because they are often several times higher than for traditional options.
You can solve this problem by making a coffee table with your own hands. You will be pleasantly surprised at how simple and fun this can be.
Low table
Most often, this option is found among coffee tables. They are not new, they have just recently begun to receive more attention from the public.
They gained popularity two centuries ago, when tea lovers - the British - began to use them. A hundred years later, this trend has spread to other countries of the world, including ours. Now this is not a very popular option, however, it has the right to life.
Chipboard table
Simple and enough practical option maybe a coffee table made of chipboard, which you can make yourself without any problems. Now on the furniture market, chipboard is one of the most available materials, which can be used to create a traditional table. We'll talk about why traditionally later.
The price tag for this option will be significantly lower than if your choice falls on a wooden coffee table. It is best to take sheets coated with laminate or varnish. Still, you will be placing such a table in your home, and therefore you need to pay attention to the aesthetic component.
Then everything depends more on the design you choose. A simple, yet small table can be made from several parts. This option will be small and with several shelves. Perfect for the living room, and will stand next to the sofa or armchair.
The shelves are well suited for magazines and remote controls for controlling equipment. This reduces the likelihood that they will get lost.
Glass table
Drawings of such coffee tables can be easily found on the Internet. You just need to take into account one feature - in almost any case you will need to buy a glass part of the table. You can solve this issue with the help of old glass, which may be in your barn or garage.
The main part of the table can be made from a material that suits you, and cover it with a sheet of glass on top. To do this, you need to cut it to shape, then process the edges and secure it to the main structure.
Even if you don’t make such a table entirely out of glass, with the exception of the frame, you can get a very attractive and interesting result that will look good both in modern interior, and in the usual apartment design without any special features.
Wooden table
Enough detailed instructions How to make a coffee table out of wood can be found on the pages of thematic magazines. This option will be more expensive than with chipboard, but the appearance pays for everything. This material is better suited for tables large sizes, which you can work on if necessary or use them to store documents that you view while sitting in front of the TV in the evening.
The design can be tritely simple: four bars for the legs, which are complemented by the tabletop the desired shape. Depending on the latter, you can take three legs, which will look even more interesting.
On top of this you can add various decorative and functional details - be it shelves or decorations. Here you can give freedom to your creative nature.
Unusual table options
You may have often come across photos of coffee tables that are made from unusual materials. This can easily include a table made from an old suitcase.
The most interesting thing about this is that you will have to do practically nothing to create such an item. All you have to do is restore the pleasant appearance, if required at all, and by installing such a table.
A huge advantage of this solution will be the intelligent use of space in the room. This would work well in front of the sofa, while the space inside the suitcase would also be good to use. You can put some kind of blanket or boxes of shoes there. In general, here it comes down to personal choice; in any case, it is very convenient and practical.
Table made from scrap materials
Separately, I would like to consider a coffee table made with my own hands from scrap materials. There are several options that I really liked, and I want to share them with you.
The first one is a table made of pallets. They can be found in any supermarket or warehouse, and therefore it will not be difficult to get them. They are made of wood, which is very good for the interior. This wood can be varnished, which will greatly change its appearance.
Take two of these pallets, or trays, whichever is more convenient for you, place the first one with its legs up, and place the second one on top so that the legs meet. They can be additionally connected with self-tapping screws, and a sheet of glass can be placed on top of them. The option is very beautiful and easy to implement.
As you already understand, I prefer the options when I don’t have to deal with the work of furniture companies, and cut out all the parts, and then customize them. I am more interested in creative and fresh solutions.
For the second option, you will need only four old boxes, which, when placed on their sides, need to be connected to each other clockwise. We first coat them with varnish, connect them and that’s it – the table is ready. The empty space inside can be covered with a tree and a flower placed on top. Good luck with your choice.
DIY photo of coffee tables
Many things can be done with your own hands. This is difficult in most cases, only at first glance. The new review collected examples of unique and amazing coffee tables that craftsmen made with their own hands.
1. Old suitcase
Old suitcases are real finds for designers and out-of-the-box thinkers. Through simple manipulations, suitcases are transformed into unique furniture and decorative items. For example, you can turn an unnecessary suitcase into an original coffee table by simply screwing legs to it. This table will add charm to both a bachelor’s apartment and a family living room decorated in a classic style.
2. Boards
Instead of going to a furniture store and buying a finished product, get creative and go to a hardware store. wooden blocks And metal legs. Next, you should connect the boards together and screw the boards to them. A table made by yourself is a unique and universal thing, as wooden furniture fits perfectly into any interior.
3. Battery
Have you purchased new batteries? However, do not rush to throw away the old one. cast iron radiator. Buy a piece of glass and turn it old battery into an original coffee table, which you definitely won’t see either in the store or with your friends.
4. Framed window
An old framed window is a wonderful material to create a charming coffee table for your living room. Screw legs wrapped in coarse rope to the frame and decorate the table top with beads and shells.
5. Logs
A stunning low table can be made from small logs. First you need to assemble the base of the table from plywood, glue wooden beams around the perimeter, and cover the middle with a plywood lid. Next, you need to glue thin wooden cuts onto the plywood lid so that it seems as if the table is made entirely of logs, screw on the legs and thoroughly seal all the cracks.
6. Wooden cuts
Large wooden cuts are an amazing material for creating a beautiful and original table that will become a real highlight of the living room and will last for many years. Making such a table is as easy as shelling pears. You need to carefully process the wood and fasten the two cuts together, glue a wide wooden block-leg in the center and open the surface with varnish.
7. Pallet
Wooden pallets- an excellent material for creating a wide variety of furniture: sofas, beds, chairs and of course tables. To begin with, you should get a pallet, thoroughly clean it and paint it in the desired color. All that’s left is to screw the legs and put the glass tabletop on top.
8. Wire reel
A large wooden reel for wires is a practical ready-made coffee table. Of course, it’s not so easy to get it, but if you’re lucky enough, you know what to do with it.
9. Tire
There are many ideas for creating original furniture from unnecessary car tires. For example, you can make a charming table out of a tire, a piece of plywood, a few pieces of wood and some rough rope.
10. Glass
Budget and very original table for a modern living room, which will require glass to create square shape and low wheeled legs.
11. Glass and books
An original idea for recycling unwanted books. Certainly, we're talking about not about fiction and works of classics, but here are old textbooks that gather dust idle on the shelves. In addition to books, you will also need a small piece of glass and a frame. Insert the glass into the pre-painted frame and attach the finished structure to the book posts.
12. Chest
Wooden table and basin.
Sometimes even a broken trough can do a good job. For example, it is useful for creating coffee table. In addition to the metal vessel that acts as a leg, you will also need a round tabletop made of chipboard or wood.
15. Old table
An old coffee table can be an excellent material for creating a new table. You just need to paint the legs and cover the table with fabric of the desired color.
Reading time ≈ 4 minutes
A coffee table made from wood with your own hands can become exactly that interior detail that will add completeness and atmosphere to the entire room. After all, this will not be a trivial acquisition from furniture store, but a thing created with one’s own hand. Don't be discouraged if you don't have specialized carpentry knowledge. How to make a coffee table without expensive tools and great experience we will tell you in our master class.
Selection of drawing, materials and tools
To make a table, you can use many materials: glass, metal, plywood, chipboard. We will consider a simple option with wooden beams and boards, which a person without experience can easily implement.
First you need to think over the table drawings, based on which you will select necessary materials and tool. The simplest, most convenient and versatile option is the classic model of a rectangular table on four legs. Tabletop parameters and leg heights may vary depending on preference.
Drawing of a classic coffee table.
Therefore, to make a table you will need the following materials:
- Wooden beam 40*40 mm (total length 1.6 m).
- Planed board for drawer 50*20 (total length 3 m).
- Planed board for table top 10*20 mm (total length 3.2 m).
- Self-tapping screws.
- Wood putty.
- Varnish or paint for decorative finishing.
Instead of tabletop boards, you can take a sheet of waterproof plywood and cut a tabletop from it. In this case, making the table will be even simpler.
Expert advice: the frame (the frame between the table legs on which the tabletop rests) must be made, otherwise the structure will be unstable and will deform over time.
It is also worth preparing the following simple tools:
- Wood file or jigsaw.
- Electric screwdriver.
- Sandpaper (sanding attachment for drill/grinder).
- Level.
- Pencil for marking.
Step-by-step production of a table
Step-by-step progress:
Coffee table before painting.
Expert advice: after each layer of varnish, the product must be carefully sanded with fine-grained sandpaper (grain size 20-40 microns).
Thus, making a wooden coffee table with your own hands will take you no more than a few hours in total, as a result of which you will receive a beautiful, easy-to-use product.
Video: making a coffee table from beams.
