How to hang meter-long vinyl wallpaper. How to glue meter-long wallpaper - we’ll figure it out and learn together! Characteristics and preparation for do-it-yourself gluing

Tsugunov Anton Valerievich

Reading time: 6 minutes

Everything flows and changes, including the world of wallpaper. Recently, along with traditional ones, rolls called meter rolls have appeared on sale. For their production they are used different materials: non-woven fabric, paper, fabric, bamboo. Having undoubted advantages, they have not yet found the scale of application that they deserve. People are accustomed to the standard 53-centimeter width. Or maybe it’s worth moving away from stereotypes and learning how to glue meter wallpaper correct and beautiful?

Advantages and disadvantages

The term “meter-long wallpaper” is conventional: under this name you can find 90-centimeter rolls and tubes much wider than a meter. Belgian manufacturers, for example, produce canvases reaching a width of 1.4 m.

Meter wallpaper came to us from abroad, where their advantages have long been appreciated:

They make the pasting better, reducing the number of joints on the walls by at least half.
They save effort and time: it’s easier to cut and stick 5 strips of meter-long wallpaper instead of 9–10 standard sizes.
They are cheaper than traditional material: the price of one wide tube is less than the cost of two standard ones.

Flaws:

Can only be placed on a flat surface: if there are defects, good joining of the wallpaper panels cannot be achieved.
Consumption, compared to standard ones, may increase: due to a strip of several centimeters, you will have to buy an additional wide roll.
It is difficult, sometimes completely unrealistic, to paste meter-long wallpaper alone.

Tools and materials

To work you will need:

pencil;
plumb line;
tape measure or measuring tape;
roller or spatula;
masking tape;
wide brush;
clean rag or sponge.

If there are significant flaws in the surfaces to be pasted, you will need putty, primer, and sandpaper.

You need to take care of the wallpaper glue in advance. When choosing it, do not forget that different types wallpaper (non-woven for painting, paper, vinyl and others) require their own type of adhesive.

Preliminary preparation of walls

The base for meter-long wallpaper should be perfectly flat. The operations themselves are traditional, but they must be carried out with special care so that insoluble problems with joining the wallpaper do not arise later.

Nails, screws, screws are removed from the walls, switches and sockets are removed, holes are sealed masking tape.
The old coating is removed: wallpaper, plaster, paint, etc. How to do this correctly is described in.
The next stage is cleaning the walls sandpaper.
For serious unevenness, you will have to use putty.
The surface is covered with 1–2 layers of primer. So she won't absorb wallpaper glue, and the adhesion of the canvases to the wall will improve.
If it is planned that they tend to show through, a white primer or paint is applied last.

Advice: you can start applying glue to the base only after the primer has become completely dry.

Marking walls and cutting canvases

Wide wallpaper is glued end-to-end, so work can begin from any convenient place.

To ensure that the first strip lies on the wall as evenly as possible, a vertical line is drawn using a plumb line and a pencil. This will become the starting point for the sticker.

Before cutting begins, it would be a good idea to measure the length of the wall and determine the number of strips that will fit on it.
When cutting, you need to leave a margin of 10 cm at the top and bottom of each wallpaper. Don't forget about the allowance for matching the pattern. Excess is easy to remove sharp knife after the glue has dried.
The rolls are rolled out on a dry, clean surface face down and the required length is measured. Having made a notch, bend and cut along the resulting seam.

Important! High humidity in the room where wallpapering is going on is undesirable. A draft is completely unacceptable; extreme coolness is also contraindicated. It is best to glue at a temperature of 15–25˚С.

Sticker process

Depending on the type, meter-long wallpaper is attached in different ways:

Paper canvases. The material is first coated with glue, then the sticker is applied to a dry base.
. The technology is exactly the opposite: the wall is covered with glue, the strips are applied to it dry.
Heavy. Both the wallpaper and the wall are coated with the adhesive.

Baguettes should be placed before gluing begins. About why they should not be mounted on top finishing coating, written.

To work with meter-long wallpaper, a partner is needed: the first person holds one edge of the strip, the second holds it on the opposite side. It is convenient to use two stepladders at once - this makes leveling wallpaper on the walls much easier and faster.

Sequencing:

On reverse side paper and vinyl wallpaper with a paper base, glue is applied. Non-woven fabrics are left without it. Paper ones are applied to a dry base. For the rest, the glue is applied with a roller to the wall along the width of the wallpaper with an additional grip of approximately 20 cm.
The joints and corners are carefully coated with a brush. The glue is applied especially well on the top of the wall.
Begin gluing the cut from the top, aligning it along the intended vertical. To do this, you need to hold the panel by the upper edge, climb the stepladder and attach it strictly to the junction of the ceiling and wall. The partner controls the coincidence with the intended vertical.
After checking, the strip is leveled with a plastic spatula or rubber roller. The choice of device depends on the type of wallpaper: a hard tool can damage the textured canvas. You should start from the middle of the band, expanding the range of movements: from the center - to the sides, up and down.
To get rid of air bubbles, carefully smooth the wallpaper from the center to the edges. By pressing with the tip of a spatula, additionally work out the corners and joints of the wallpaper with the baguette and the baseboard.
A second glue line is applied with the same 20 cm margin. This is necessary so that during further actions the glue does not get on the wallpaper. The next section is glued and joined to the first one.
After smoothing, you need to go over the joint with a rubber roller.
All subsequent canvases are glued in a similar manner.

Advice: you need to put up new wallpaper before you start heating season, since the hot air near the radiators wrinkles the canvas.

Working in difficult areas

Wide-format wallpaper makes it difficult to cover corners, spaces behind radiators and above openings. For awkward places experienced craftsmen It is advised to cut the canvas into more compact pieces and use glue, which dries slowly and gives time to correct mistakes.

Angles

An attempt to decorate a corner with a single piece is guaranteed to lead to failure: it will be skewed, folds without trimming, which will not affect the appearance of the wallpaper. in the best possible way, will be impossible to eliminate. But if this does not happen, the curvature of the angle will certainly disrupt the perpendicularity of the canvas, and then the number of defects will only increase.

Correct actions:

A strip is cut out 5 cm larger than the width from the corner to the glued wallpaper.
The wall and corner are carefully coated with glue.
Wallpaper is glued, placing a 5-centimeter margin on the adjacent side of the corner.
The narrowest place of the overlap is determined, where a mark is placed at a distance of 1 cm from the edge of the wallpaper, through which a vertical line is drawn.
With the orientation towards it, the next sheet is glued with an overlap.
The seam is trimmed using a spatula, ruler, or stationery knife.

Batteries

The wallpaper under the window sill is glued last. The work will require patience and accuracy, bordering on virtuosity.

The wallpaper sheet is cut to the size of the radiator niche.
Vertical cuts are made in areas coinciding with the battery mounts.
The glue-coated section is carefully inserted behind the pipes.
The next task is to straighten the folds formed on the sheet and press it against the wall. Due to the tightness, it is impossible to use a paint roller, so smooth it out using a rag.
Excess overlap is applied to the edge of already pasted wallpaper.
Pressing both layers firmly with a spatula, make a vertical cut.
The joint remaining after removing the cut strips will become invisible when dry.

Some switches cannot be removed without dismantling the entire mechanism. In this case, trimming is carried out without removing the protective panel.

The wallpaper strip is pasted only up to the switch; with a sharp knife, punctures are made in the corners of its frame, serving as a guide for the cross-shaped cut.
After cutting, press the edges tightly with a spatula, remove excess, carefully roll the edges to the wall and continue gluing the rest of the panel.

Openings

Wallpaper on doorways is cut off. On arches and windows, they are also cut to the size of the opening, not forgetting to carefully ensure that the pattern is aligned.

What if you have to glue alone?

Sometimes you can do without an assistant when attaching meter-long wallpaper - non-woven varieties of material will help out, because in this case the glue is applied only to the wall. Non-woven fabric will help you easily join seams even in corners. There are no particular difficulties with aligning the stripes. If it is not possible to glue the sheet correctly right away, the panel is removed and the operation is repeated again - non-woven fabric allows this. But meter-long wallpaper made from other materials will not allow this; a partner is necessary in such cases.

Before you hang meter-long wallpaper, you need to calculate its quantity (how many rolls will be needed per room). Therefore, first, determine the perimeter. For example, the width of the room is 6 meters and the length is 7. Then the perimeter is 26 m. The amount of wallpaper is calculated using the following formula: perimeter of the room: roll width: 9 or 10 (the first number if the image is adjusted).

Let us explain what 9 and 10 mean. The fact is that these wallpapers usually have a length of 25 meters. The average ceiling height is 2.50 m. Therefore, 10 canvases are obtained from one roll. Returning to our example, the number would be: 26:1:10 (without adjusting the pattern) = 2.6 rolls. Round up to 3. As you can see from the above, these wallpapers are also a very profitable option. If it suddenly turns out that the length of the roll is 10 m, then you need to divide by 3 and 4, respectively.

Advantages of meter wallpaper

As it turns out, meter-long wallpaper has some undeniable advantages over regular wallpaper. Firstly, we can say that sticking much more profitable in terms of time and finances. Three rolls of this wallpaper cost less than 6 rolls of regular wallpaper (0.53 m). And the process itself is much faster, and consumables are significantly saved.

Secondly, they look more attractive because there are fewer seams on the wall. This generally affects the perception of space. In addition, there is less need to join the drawing. This way, random irregularities when combining images will not be so noticeable. Thirdly, most often non-woven wallpaper is 1 meter wide, which is also distinguished by its durability.

How to glue meter-long wallpaper correctly?

The question often arises - how to paste meter-long wallpaper? On initial stage you need to prepare the base. To do this, the old coating is removed from it, be it plaster, paint, etc. Then the walls are leveled. In this case, switches and sockets are covered with special masking tape. Next, prepare all the accompanying tools: tape measure, pencil, water level, plastic spatula, glue bucket, polyethylene, knife.

After this, the gluing of meter-long wallpaper begins. Mark the room from the corner. Apply wallpaper and mark vertical lines with a level and pencil. In this case, it is important to make markings taking into account the fact that the canvases will be glued using the overlapping method. Next, spread the film on the floor or table. This is necessary so that the front side of the canvas does not get dirty. The glue is prepared in accordance with the instructions (written on the package).

Attention! The selection of glue should be made depending on what wallpaper it will be applied to. For paper, non-woven, bamboo and fabric, certain adhesive mixtures are needed.

Then the question may arise - how to stick meter-long wallpaper on the walls? The principle is the same as with regular ones. The canvas is cut to a length equal to the height of the ceilings, plus 10 centimeters. Place them face down on the polyethylene and apply glue to the back. Make a fold in the center and fold the canvas in half so that it is properly saturated with glue.

Apply the same composition to the wall with a roller. At the final stage, attach the canvases themselves and smooth them with your hands or a dry cloth (to avoid bubbles). In order not to get confused with how to glue meter-long wallpaper, a video describing which is presented on our website, just follow the instructions, and then the process will be successful!

IN modern world There are many types of wallpaper that differ from each other in pattern, color scheme, width, quality, material used. Not so long ago, wallpaper appeared on the world market meter width foreign origin. Meter-long canvases are available on non-woven, paper, bamboo, and fabric bases. They have some advantages over classic ones - fewer joints, creating a “seamless” effect, reducing effort, time and costs.

Rolls of meter wallpaper all in large quantities spread across the shelves, they are more relevant and convenient than wallpaper standard width. Their only drawback compared to the classic ones is that it is more difficult to adjust the number of sheets. The problem is that people are used to gluing wallpaper that is 53 centimeters wide, and using wider ones is extremely unusual. With the help of this article, you will understand how to properly glue meter-wide wallpaper, and whether it can be done alone.

I suggest you familiarize yourself with the tips, following which you can avoid mistakes during the work process and make repairs correctly:

The process of wallpapering can be divided into stages: preparation necessary materials and accessories, preparing walls for gluing, preparing glue, marking, cutting meter-long wallpaper, as well as the gluing process itself.

Materials and tools

During the work you will need:

masking tape;
plumb line;
wide brush;
roller or spatula;
tape measure or centimeter;
clean rag or sponge;
pencil.

In addition to all of the above, you may need sandpaper, putty and primer if there are significant unevenness on the surfaces.

Preparing the walls

Remove covers from sockets and switches, seal the holes with masking tape and remove nails, screws, screws, if any, from the walls. After this, you can begin to remove the old wallpaper and remove any unevenness.

Once the surface is clean, you can begin processing it. Clean them with sandpaper. If there are significant unevenness, use putty to eliminate them, and then apply one or two coats of primer.

Attention! You can start applying glue to the wall only after the primer has completely dried.

Be sure to watch the video on how to prepare walls for wallpapering:

Preparation of glue

The adhesive you choose should match the type of wallpaper you have. To prepare it correctly, pour water into a container and pour the dry mixture into it in a thin stream, remembering to stir in a circle. Let the mixture sit for a while. Usually this does not exceed twenty minutes.

Wall marking

Due to the fact that the meter-long wallpaper is glued end-to-end, you can start gluing it from any place. You can decide for yourself where it will be more convenient for you to glue and where you should start in order to spend less material. To glue the first strip evenly, mark a vertical line from which you will glue. To do this, use a plumb line and a pencil.

Cutting cloths

Experts advise leaving ten centimeters at the top and bottom of the sheet as a reserve. Once the glue has dried, they can be easily removed. Carry out cutting on a clean, dry surface. Roll out the roll of wallpaper face down, measure the required length, make a notch, bend the sheet and cut it along the fold line.

Pasting walls and corners

Mix the adhesive solution again and begin applying it with a wide brush to the area that will occupy the sheet. Apply the previously prepared strip to the area coated with glue, and then smooth it from top to bottom and from the center to the edges. Wipe up excess glue with a dry cloth. The second one should be glued butt to the previous one. If your meter-long wallpaper has a pattern, make sure it matches.

Important! When gluing, do not allow a draft to appear in the room.

I would like to draw your attention to pasting in hard to reach places, that is, behind heating radiators, in corners, doorways, in areas with sockets, switches, etc. To properly glue the surfaces behind the radiator, cut the wallpaper into strips that will be convenient for you to use. When gluing the strip near an outlet or switch, apply the glue and then apply the wallpaper itself. Once dry, make a cut the right size, remove the excess and screw the protective boxes from sockets and switches into place. Do not glue from the corner if it is uneven. You will need to draw a reference line in advance. This will avoid distortion of the drawing.

There are two options for gluing in the corners. You can choose one of them:

Pasting one

If you don't have someone to help you during pasting, don't despair. You can handle gluing meter-long wallpaper yourself if you buy non-woven ones, because then the glue only needs to be applied to the wall. You can easily cope with joining seams, especially in corners, and aligning the strip. If you didn’t manage to stick the sheet correctly the first time, then one plus of wide wallpaper will help you out. The sheet can be removed and reattached to the wall, and the dense material of the wallpaper will allow this to be done without damaging its structure. If you choose meter-long wallpaper made from other materials, then it is best to glue them with an assistant.

Good luck with your renovation and creativity.

For some reason, many people believe that you can hang wallpaper yourself quickly and without special effort. To some extent they are right, but only partly. Because quite a large number of home craftsmen still live by old ideas about this procedure, when both the finishing material itself and the gluing technology were almost antediluvian.

What did it look like before? People bought cheap ones from the store paper wallpaper(others were simply not sold at that time, and were not produced), they quickly glued them on top of existing ones, without being particularly puzzled preliminary preparation, after which all that remained was to rejoice at the results of the “repair”. Today things are somewhat different. There are a huge number of different types of this on the market. finishing material, and the wallpapers offered are no longer paper, although there are such, but vinyl, fabric, non-woven backing, bamboo, etc. All of them are made from modern materials and based on innovative technologies, and therefore the pasting process requires a competent approach. Moreover, wallpaper today is available in various widths - from 53 cm to one meter six centimeters. And just like that, on a whim, without having at least minimal skills and sufficiently fundamental knowledge, you can’t pick them up.

No, of course, you can stick any trellises on the wall, but the result will not always please you. This is especially true for wide wallpapers, or, as they are also called, meter wallpapers. Not only are they quite difficult to work with due to large sizes, so they are also extremely capricious in terms of their demands on the surface to be pasted. And therefore, anyone who is thinking about how to glue meter-long wallpaper should, before proceeding directly to the process itself, carefully study all the available information about it. Which, in fact, we intend to present below. Let's start with the basics.

What is meter wallpaper

The most important thing that a novice master should know is that such wallpaper can only be of two types. Either vinyl on a non-woven basis, or purely non-woven. The latter, as a rule, go for painting.

Non-woven fabric is, in essence, non-woven material, created on the basis of cellulose fibers, which are held together with a special polymer. It is much thinner than traditional paper wallpaper, but at the same time much stronger. It is this feature that every craftsman who is looking for an answer to the question of whether (meter or standard width, because there are also such) should know - it doesn’t matter. Because, having a lot of advantages, this finishing material has one significant drawback - it is extremely demanding on the surface being finished. And even despite the fact that non-woven wallpaper is quite capable of hiding minor defects and irregularities, before the actual process of pasting it is necessary to carry out preparatory work. And sometimes quite large-scale. More on this later.

On the need to prepare the base surface

In the question “How to properly glue meter-long non-woven wallpaper?” The key word is “non-woven”, not “meter-long”. Of course, it is quite difficult to glue such a voluminous and heavy piece of wallpaper, the area of which is more than two and a half, beautifully and exactly without skill. square meters. However, this is not the main thing. If the finishing material is thin enough (and such wallpapers can be very thick and almost transparent to light) or has a light shade, then if there is a surface underneath that is not uniform in color, all this “geography” will be visible under the new coating. In other words: if the wall is dark, plus there are areas on it that are sealed with putty, then all this beauty will simply be visible under the non-woven material. Therefore, rule number one: you can only glue wallpaper on a surface of a uniform color. Preferably white.

Since the manufacturer suggests gluing meter-long wallpaper without spreading the finishing material (that is, only the wall is treated with glue), the base surface must be clean, dry and not absorbing glue at the speed of sound. This is the second rule.

And third. Since meter-long wallpaper must be glued strictly joint to joint (there can be no talk of any overlap), it is necessary that the base base be smooth. The presence of all kinds of pebbles and irregularities on it will not allow you to make a perfect seam.

It is with these rules in mind that preliminary work is required.

Preparing the wall

First of all, you need to completely remove the old wallpaper (whitewash, paint) from the wall. Then it is necessary to repair all cracks and other possible defects. Then there are, of course, several preparation options, but all of them, each in their own way, are not entirely suitable. Ideally, the wall should be puttied and primed. Even if not thoroughly, as if for painting, since minor defects They will hide under the wallpaper, but you still need to go over the wall with putty at least once. As a result, you will get a white, smooth surface that adheres well to the finishing material. That is, what non-woven wallpaper requires.

If for some reason this cannot be done, then it is advisable to carry out at least several types of work. First of all, you need to treat the walls with a primer deep penetration. After this, the walls will not “drink” the glue as much. And then, since it is strongly recommended to glue meter-long wallpaper only on a surface that is uniform in color, you need to treat the base with primer again. Only this time tinted. Thanks to it, the walls will turn white.

About the glue

Remember: you should not purchase any universal formulations. Buy glue designed specifically for non-woven fabrics. Since you need to glue meter-long vinyl wallpaper by coating only the walls, the composition for the work should be designed specifically for this type of work. That is, on the box with glue there should be an inscription: “For non-woven wallpaper.” As for the method of preparing the composition, the whole process is usually described in detail on the packaging.

Wall marking

After the surface is prepared, you need to start marking. By by and large, wide wallpapers are glued in exactly the same way as narrow ones. The only difference is that if there are a large number of doors (for example, in a hallway), it may be difficult to trim. Still, the canvas is quite wide. And, of course, without skills it will be quite difficult to handle such a heavy and wide piece alone. Therefore, the work must be carried out together. So, draw out the walls correctly. That is, figure out which side is better to start from, so that in the end you don’t end up with an inserted piece of a few centimeters in a visible place. Sometimes it is advisable to start pasting from the door, and not from the window. Or even from the middle of the room. Once you have decided on the starting point, draw a vertical line on the wall using a plumb line or level.

Preparing wallpaper

Next, cut the wallpaper. It is not recommended to cut all the rolls at once if the wallpaper has a pattern. Do this gradually, as needed. If the finishing material does not have a pattern, then you can cut all the wallpaper, adding five to six centimeters for allowances along the length.

Pasting

Since it is recommended to glue meter-long vinyl wallpaper on non-woven fabric only by applying glue to the wall, this is what you should do first. Carefully coat the area to be covered with a roller or brush. After this, standing on the table (stepladder in in this case will not fit due to the width of the wallpaper), attach the first canvas to the wall, focusing on the outlined line. Leave a small margin at the top. Then, using a rubber roller, begin to smooth the canvas from top to bottom, while carefully ensuring that there are no bubbles. After this, remove any remaining glue with a rag and cut off the top and bottom. The next canvas is glued in exactly the same way, but strictly joint to joint. And so on until the corner.

How to glue meter-long wallpaper in corners

If you are sure that the corners in the room are one hundred percent even, feel free to wrap the wallpaper on next wall and continue gluing further. Just coat the corner itself with more glue. If there is no such confidence, the canvas will have to be cut. To do this, wrap it on the wall, carefully move the edge of the spatula along the corner, and then trim the wallpaper, stepping back half a centimeter from the intended line. Glue the cut piece overlapping into the corner, and then dance from its edge. If you start gluing from a corner, move the edge of the first canvas to the corner by a centimeter. Glue the second one onto it, too, overlapping under level control, so that all subsequent strips lie evenly.

How to glue meter-long wallpaper on the ceiling

This procedure has some of its own characteristics. As for preparation, there is only one option: the ceiling needs to be cleaned of whitewash, puttied and primed. It should be white, smooth and even. Then you need to attend to the preparation of the “scaffolding”. That is, arrange several tables so that you can move around them freely. Then we stir the glue, draw a straight line on the ceiling (we start marking from the window), measure the length of the first canvas (the distance from wall to wall with a margin of 10 centimeters). It is recommended to glue in length, not width. After this, cut off the desired piece of wallpaper and roll it up, but with the front side inward. We smear the ceiling with glue and begin gluing the wallpaper, gradually unwinding the roll and smoothing the surface of the finishing material with a roller. The procedure needs to be carried out only by two people (one glues and smoothes, the second unwinds and corrects). We cut off the excess, remove the remaining glue, glue the next strip in exactly the same way, joint to joint.

Conclusion

We tried to tell you in detail how to properly glue meter-long wallpaper. As you may have noticed, the procedure is not much different from that of working with conventional materials, except that only the wall needs to be coated. But to have such an opportunity and get in the end good result, this very wall needs to be properly prepared. Which is, perhaps, the most important nuance of this kind of finishing work.

Almost each of us had to glue wallpaper ourselves or help friends with this, so the technology of work does not raise any questions - apply glue and apply it to the wall. But today on the market you can find unusually wide wallpapers, the pasting of which confuses even some experienced workers. This wallpaper, needless to say, is very beautiful, durable and unusual, and in this article we will talk about how to glue meter-long wallpaper.

Meter wallpapers are becoming more and more popular every day - people want something new and “fresh”, and unusual and colorful wallpapers are just that. The width of the material is almost 2 times greater than the usual 53 cm. They come in 90, 110 and even 140 cm wide, and if you know how to properly glue meter-long wallpaper, you can only imagine how quickly such repairs will take place!

Of course, you have to pay a hefty sum for all the attractive new items, and wide wallpapers often scare ordinary people with their price tags. But those who have already dealt with this material unanimously claim that every penny spent is worth it - the wallpaper looks uniform, harmonious, lasts a long time and is unpretentious to use.

It's time to consider the advantages of meter wallpaper:

Gluing meter-long wallpaper is much faster and easier (using the equipment) than standard wallpaper.
The drawing turns out to be more complete.
Fewer joints and seams.
Wide wallpapers are produced only abroad using special technologies and high quality.
Despite the seemingly high cost of meter-long wallpaper, one roll will be cheaper than two rolls regular wallpaper the same quality.
Ideal for large rooms.

As usual, even the most quality products has its drawbacks, and meter-long wallpaper is no exception:

Gluing them alone is quite problematic, especially if you are doing it for the first time.
Before pasting, you need to prepare the walls very carefully - wide wallpaper looks good only on perfectly smooth and even surfaces. Otherwise, the joints of adjacent wallpaper strips will be distorted.
Despite the impressive width, the length of the wallpaper may not be enough, which is why you will have to buy an additional roll, so you need to take accurate measurements of the area of the room before going to the store, especially for rooms with non-standard square footage.

Preparatory work

Before you start hanging wallpaper and transforming your home, you need to go through several mandatory steps - prepare the walls and carry out calculations. Without this preparation, any idea is doomed to failure, so read the sections below carefully.

How to calculate wallpaper consumption

Correctly calculating the amount of wallpaper for repair will help you save an impressive amount and get the job done accurately and quickly. Many people decide to use a special program for this purpose - an online wallpaper calculator. But even the best calculator will not help you with wide wallpaper, especially if you are lucky enough to own an apartment with a non-standard layout.

Carrying out calculations consists of several stages:

You should start with the perimeter, calculating it according to an elementary scheme familiar from geometry lessons: (length of the wall + length of the adjacent wall) x2. For example, if there is a wall 4 m long and a wall 3 m long, then the calculation will look like this: (4+3)x2=14 m.
Measure each wall separately along the bottom edge, making allowances for doorway recesses, recesses and protrusions.
Many people “subtract” doors and windows, reasonably believing that wallpaper will not be spent on them. But if you are not good at calculations and cannot calculate how much window and door openings take up in total, it is better to have a little material left over than to have to buy another roll in case of an error.
Is it necessary to glue wallpaper behind furniture? Ideally, yes. In general, before pasting it is advisable to remove all furniture from the room. But if we're talking about about a bulky wall-sized wardrobe that you are not going to rearrange for the next few years, then you don’t have to burden yourself with unnecessary worries and costs.
It is always recommended to keep a roll or half a roll in reserve. This is necessary in case of unplanned repairs, replacing a piece of wallpaper (a child painted it with a felt-tip pen, a dog scratched it, etc.). If you do not leave anything in stock, then finding exactly the same wallpaper on the market can then be quite problematic.

Surface preparation

When working with wide wallpaper, the most difficult and time-consuming task is not pasting, but preparing the walls. You should start this even when the ceiling is being finished, if you are dealing with a new building or doing a major renovation in the apartment.

What is the preparation of walls:

Remove the covers from all outlets and switches, and carefully cover the openings with electrical tape or masking tape so that it can be easily removed after work.
Remove all fasteners (nails, screws, self-tapping screws) from the walls.
Remove old covering (wallpaper, paint, etc.). It must be removed completely, down to the smallest pieces.
If necessary, level the walls by filling potholes and cutting off bumps. The dried putty should be rubbed with fine sandpaper.
Without fail, even on perfectly smooth and smooth walls One or two standing primers should be applied. It increases the adhesion force of wallpaper to the wall and significantly saves adhesive composition. The primer clogs all the smallest holes in the wall, preventing the glue from being absorbed into it and ensuring strong adhesion of the wallpaper. The glue must be applied to a completely dry primer. Drying times vary and depend on the number of layers applied. More detailed information indicated on the packaging of the primer composition.

If you have an apartment with catastrophically crooked walls, the alignment of which will take a lot of effort, money and time, it makes sense to consider the option of covering the surface with plasterboard. In this case, you can “kill two birds with one stone” - create a perfectly flat surface and provide high-quality thermal insulation, which is especially important for modern apartments with thin walls.

A video on how to glue wallpaper and properly level walls will help you do the work quickly and competently:

How to glue wallpaper: instructions

When all the preparatory work is over, you should check and, if necessary, replenish your construction arsenal.

To hang wide wallpaper you will need the following tools:

a wide brush or flat construction brush with stiff bristles for applying glue (some people prefer to use rollers, but it’s better to start with a brush);
rubber roller for ironing wallpaper;
ruler at least 50 cm long;
a simple pencil;
construction plumb line;
stationery knife;
scissors;
clean dry rags.

It’s best to glue wide wallpaper together with two or three people, because if you’re not used to it, it’s quite difficult to handle large pieces of material.

The technology for gluing meter-long wallpaper is as follows:

Measure the length of the wall with a tape measure and calculate how many strips of wallpaper will be needed to cover it.
Mark the first canvas. You should start from the window, moving deeper into the room. At 105 cm from the corner, draw a vertical line from the ceiling to the floor, using a plumb line and a ruler. Just in case, it is recommended to leave a couple of centimeters if the walls are not completely smooth.
When working in the corners, allowances should be left, which will subsequently be covered with a panel on the adjacent wall. This will prevent unsightly cracks from forming.
Cut the number of strips required for one wall, making a small allowance along the length of 2-3 cm.
Generously coat the wall with glue over the entire width of the panel, slightly going beyond the marked boundaries.
Since it is better to glue wide wallpaper for the first time with an assistant, one of you should hold the panel by the top edge, climb with it onto a stepladder to the ceiling itself and place the edge exactly to the boundary line of the ceiling and wall. The coincidence along the vertical border outlined in pencil must be controlled by an assistant.
Smooth the wallpaper to the wall with a dry rag or gloved hand, working from top to bottom and pushing air bubbles to the edges. Under no circumstances try to stretch the wallpaper horizontally, otherwise after drying you will find a completely different result than you expected.
Place the following sheets close to those already glued, applying them without overlap or gaps.

In most cases, it is not possible to fit an equal number of strips onto one wall, and you have to cut the panel vertically. Then the wallpaper on the adjacent wall should be applied to the corner, covering the cut so that there is no gap, and the glue that protrudes from under the material should be wiped off with a dry rag.

Excess wallpaper (length allowances) should be trimmed only after the panel has completely dried, since otherwise the sheet will most likely shrink in the corners, and crooked gaps will form near the floor, which cannot be masked even with a wide baseboard.

How to glue wallpaper alone

If it so happens that you were unable to get an assistant to hang wide wallpaper, you can handle this work yourself. There is an opinion that non-standard wallpaper can be glued with only one or two assistants, but this is not so. The width of the roll is more than 100 cm, and the human arm span is 150 cm, so you can easily handle it alone, joining the seams and leveling the panel.

The gluing principle is exactly the same as when working with an assistant. If the first time it was not possible to stick the canvas evenly, it can be removed and applied to the wall again - dense material, as a rule, allows this to be done without damaging the structure.

Pasting hard-to-reach places

Places behind radiators, in corners and areas above doorways always cause difficulties, especially when it comes to wide wallpaper. To glue the panel behind the battery, you will have to cut the panel into several small pieces. It is best to cut one piece to make it easier to recreate the original design.

It is quite problematic in such places to ensure that the pattern matches completely. And if an inexperienced person can still handle it above the doorway, then you can do this behind the battery only if you have the appropriate experience or design skills.

First you need to glue a piece of wallpaper to a free section of the wall, and then align it along a pre-designated vertical. The second piece is glued to the opposite end of the battery, aligned as clearly as possible, and the seam is closed with an edge. It is unlikely that you will be able to perform such an operation perfectly the first time, so be patient.

Non-woven wallpaper will become best choice for inexperienced builders - their position on the wall can be easily adjusted as long as 10 minutes after sticking. But to make this possible, it is necessary to use adhesives without additives for rapid hardening.

Below will be given useful tips for beginners from professional builders which will help you learn how to glue meter-long non-woven wallpaper correctly and reliably:

Before gluing, prepare the walls as thoroughly as possible. It is impossible to overdo it in this regard - the more ideal the surface, the greater the likelihood that the wallpaper will stick more evenly and beautifully.
To improve stability adhesive composition, it is recommended to prime the surface.
It is extremely important to create suitable temperature conditions in the room to ensure even drying of the glue. Otherwise, the wallpaper sheets may become deformed and the pattern at the joints will move.
During gluing and until completely dry, do not allow drafts to form.
The humidity in the room should be minimal, otherwise the glue will take a long time to dry, and the quality of work will leave much to be desired. At worst high humidity can provoke the appearance of fungi and mold under the wallpaper.
It is recommended to glue meter-long vinyl wallpaper in summer time(before the start of the heating season).
Please note that the wallpaper will be exposed to batteries high temperature for a long time, so they may shrink and move away from the wall.
In order to understand the process of gluing wide wallpaper, it is enough to make markings only for the first section. But if you are not sure, it is better to play it safe and mark the entire room, immediately counting and cutting the roll into required quantity canvases
Inexperienced builders who want to cope on their own are better off starting their acquaintance with the world of wide formats with non-woven wallpaper, since they do not need to be coated with glue (only the wall), and they are easier to handle than other types.
If you bought non-woven wallpaper, purchase glue designed specifically for it and recommended by the manufacturer.
It is very convenient to use two stepladders to ensure uniform leveling of the canvas on both sides.
Many inexperienced builders do not know how much time must pass after gluing before they can open the windows and ventilate the room. You should take into account the drying rate of the adhesive and the type of wallpaper, since for some a day will be enough, while for others it will take 3-4 days to dry. Information about this can be read on the packaging of the adhesive.
And the most important rule is to avoid drafts while working, otherwise, rest assured that you will have to redo everything all over again.

Meter wallpaper is gradually ceasing to be an outlandish novelty, and they can be found in almost any apartment. Another question is, will you do the repairs yourself or would you prefer to pay a construction company? We hope that after reading this article, you will not have any difficulties with hanging wide wallpaper yourself.