Choosing paint and tools for painting a refrigerator yourself. Painting a refrigerator Paint for painting the inside of a refrigerator

If your refrigerator copes with its functions perfectly, but already looks shabby and does not fit into the interior of the kitchen at all, you can update it. Often it is appearance The device, or rather its damage, is the main reason for replacement. Old refrigerators are not thrown away, but sold or used in the countryside. Accordingly, by updating the color, you don’t have to spend money on buying expensive equipment if you’re satisfied with the rest.

Suitable for this purpose are either self-adhesive film, or paint. The first option is difficult to implement, because it is difficult to paste over the surface of the refrigerator evenly and without wrinkles. In addition, the film is easy to scratch and quickly fades when exposed to sun rays shining through the window. It’s much easier to evenly repaint the refrigerator, choosing absolutely any color, and perhaps even create a pattern!

And now, first things first, let’s figure out how to paint a refrigerator at home, what paint is suitable for this, and what sequence of actions should be followed in order to do it yourself, without involving specialists.

Painting a refrigerator at home involves the use of special paint and tools. The surface of the equipment cannot be classified as simple or ordinary; accordingly, not every coloring substance can be used. High demands are placed on the paint layer:

1. It must protect the facade from mechanical damage that occurs during operation.
2. It should give an updated appearance and add variety to the interior.

Also, the paint should not “peel off” after a few months, that is, it must have high performance characteristics.

When choosing materials, take into account the specific use of the device. If the refrigerator is always located in a dry and heated room, that is, in the kitchen, there is no risk of rust. Another question is if the refrigerator is placed in a damp room, for example, in workshops or warehouses and other industrial areas with high humidity. In this case, it will be necessary to treat the surface with an anti-corrosion solution. For home use such a solution will be inappropriate, as well as a fireproof base or paint, because in principle a refrigerator cannot be connected near a fire.

In this case, paint that can be mixed with other colors, adheres to a vertical surface, is elastic in structure and is resistant to detergents is preferred. Thus, to paint a refrigerator you need metal paint for interior works, resistant to water.

There are several types of such paints, and the following types are ideal:

• nitro enamel for painting cars - this type is easy to apply, is highly durable, and has a beautiful shiny tint. The paint is sold in aerosol cans, so application will not be difficult. Disadvantages include high cost, toxicity (should be used when open windows and in a respirator), inability to control splashes. To organize the process, you will have to cover the walls, floors and furniture to prevent subsequent cleaning;
• acrylic paint for metal - applied with a roller or brush, available in many colors. The composition is characterized by safety, since it contains no toxic substances;
• polyurethane paint - of all types, it is more resistant to wear. Moreover, it can be used both for the external surface of the refrigerator and for the internal one. She's not afraid low temperatures, is easy to apply, so in cases where it is necessary to paint over scratches, use it.

What tool will you need?

You cannot start painting right away; the surface must always be prepared in advance. The refrigerator is located in the kitchen, where food is constantly being prepared, so every housewife has traces of grease on its surface, covered with dust. These may be tiny specks, but they are there. That is why, before starting work, it is necessary to wash the surface well so that the paint lays evenly and easily, eliminating cracks and chips in the future.

To organize work, including preliminary preparation and further painting, you will need the following tools and materials:

• detergent to remove dirt;
• abrasive sponge;
• rags (dry and wet);
• fine-grained sandpaper;
• acetone or kerosene for degreasing;
• primer (for better bonding of the paint layer and the surface of the equipment);
• masking tape, film, tape;
• newspapers to cover the floors;
• respirator;
• gloves;
• dye;
• brush and roller.

Having collected the materials, you can begin to work.

Preparation process

As already mentioned, painting a different color should begin with preparing the surface of the refrigerator. Therefore, follow the proposed action plan:

• for safety reasons, disconnect the equipment from the power supply, also remove the internal shelves and partitions, especially if you will also be painting inside;
• Using detergents and an abrasive sponge, thoroughly clean the surface and rinse off the applied solution. Just cleaning the refrigerator is not enough; you also need to thoroughly rinse off the chemical compounds;
• Sand the surface with sandpaper, partially removing the old coating. Rub most thoroughly in places where there are already cracks and chips - here the old layer of paint is gradually coming off, so it is necessary to remove it so that in the future it does not cause damage to the new coating;
• Wipe the refrigerator first with rags soaked in water, then with dry ones. This will remove the particles old paint, which also should not remain on the surface;
• treat the refrigerator with a primer;
• Seal handles and other fittings with tape or wrap with film. You can use masking tape to cover the elastic on the door and other parts that should not be painted. Also, if you are going to stick with a geometric pattern, then masking tape the perfect assistant for this;
• cover the floors with newspapers and, if necessary, the walls;
• test the paint on a small area of ​​the refrigerator. Evaluate whether the color is suitable, how the paint applies, etc.

Painting process

Having completed preparatory work, the most important thing remains, paint old refrigerator. If you choose spray paint for this purpose, you must follow the instructions for it. General recommendations on using this type of paint:

• When applying, keep the can at a distance of 30 cm from the surface to be painted;
• movements should be uniform, from left to right, without staying long at one point, otherwise this place will be noticeable later;
• paint in 2-3 layers, but each of them must dry, and only then the next one is applied.

If your choice fell on paint in a can, then you will need a brush or roller. Sharp color transitions either below or above will lead to an unattractive result. Move systematically from left to right. Painting is done in 2-3 layers, each of which must also dry.

As you can see, there is nothing difficult about updating the appearance of a working refrigerator with your own hands; even a person who does not have the proper experience can cope with this task. The main thing is to follow the recommendations for choosing materials and the sequence of actions, and then the result will delight you for many years!

In the current era, people are highly dependent on technical inventions, including those of a household nature. It is unlikely that today you can find the average family without such a necessary unit as a refrigerator. Sometimes, when it breaks, we begin to wonder: “How did our grandmothers manage without this miracle device?”

However, a refrigerator is not always purchased only because it is broken. Where more often to the store for new technology sent only because the appearance of the old one leaves much to be desired. Unfortunately, not everyone knows that the procedure for painting a refrigerator easily resolves such difficulties.

Even an old refrigerator can find new life thanks to painting

This method, like pasting the surface with oracal (self-adhesive decorative film) - perfect for updating the design of a refrigerator or hiding external defects. But, unlike the second method, which requires considerable skill and patience, otherwise the film will lie on the surface with air bubbles and wrinkles, you can paint the refrigerator quickly and without extra costs for materials and tools.

Of course, like any restoration work, the painting process refrigeration equipment has its own characteristics and some nuances. Moreover, they need to be taken into account if the operation is carried out by hand.

Choosing paint and tools

So, to paint a refrigerator at home, you need to purchase paint and tools in advance.

First, you should choose a paint: since a refrigerator is not the most common surface to process, not every coloring agent is suitable as a coloring agent. So what should you paint with?

It is worth noting that the applied finishing paint layer should, firstly, protect the casing from mechanical damage and, secondly, decorate the device. In the case of a refrigerator that will always be in a dry and well-heated room, it is not in danger of rust, so there is no point in spending money on an expensive anti-corrosion agent. will also be superfluous, because the operation of the refrigerator itself near fire is prohibited.

Waterproof metal paint will cope well with such tasks as painting a refrigerator

On the other hand, the coloring material must be tintable and thixotropic (hold the layer on a vertical surface), be elastic (after all, the metal used in refrigerators has a high coefficient of thermal expansion) and not be afraid of detergents. As a result, we get the conclusion: it is needed for interior work.

The metal surface is covered with paints of various compositions:

• organosilicon;
• zinc
• alkyd
• nitrocellulose
• acrylic
• epoxy
• polyurethane
• oil

However, to simply paint a refrigerator, you don’t need to go into much detail about their contents. For this type of purpose, the following types of coloring solution are suitable:

1. Automotive nitro enamel. Durable, durable and beautiful. Sold in cans and applied by spraying. It has several disadvantages: cost, toxicity, uncontrollable splashes during the process, as well as the need for subsequent cleaning of accidentally painted areas with a solvent.
2. Acrylic paint metal surfaces. Allows you to choose from a wide variety color solutions, safe due to the absence of toxic substances. Apply with a roller or brush.
3. Polyurethane or epoxy paint. The most resistant to wear, difficult to prepare due to two components.

Epoxy paint can be used to paint both the external and internal parts of the refrigerator.

For the most part, any of these three will do. finishing materials. You can paint the inside of the refrigerator with the same paint.

Any narrow paint roller made of threads or a brush will be suitable as a working device, and if used, tools will not be needed at all.

Surface preparation

For the vast majority of people, the kitchen is perhaps the most favorite room in the apartment. It is associated with the warmth of home and delicious food. But this medal also has back side, and it concerns household appliances.

During the cooking process, soot settles on the surface of kitchen electronics, which, when dried, forms a greasy layer of stains. Over time, stains attract dust, so the refrigerator becomes covered with a layer of dirt that is resistant to regular detergents. Therefore, before painting, the surface of the refrigerator must be thoroughly washed so that the paint applies easily and evenly.

For pre-treatment, as well as further painting work, you need to buy or remove from the pantry in advance:

• detergent for removing greasy and stubborn stains;
• sponge with abrasive coating;
• wet and dry rags;
• fine-grained sandpaper;
• degreaser (acetone, gasoline, kerosene);
• primer (optional);
• tape, cling film or masking tape;
• unnecessary sheets of newspapers and magazines as lining;
• respirator;
• gloves.

When painting, to protect your respiratory organs, you must purchase a respirator.

Now that all the accompanying materials are at hand, you can begin.

Preliminary preparation of the surface of a refrigeration unit for painting includes the following steps:

1. Disconnecting equipment from the power supply and removing internal shelves and trays.
2. Thoroughly rinse the device with outside using a special detergent and an abrasive sponge.
3. Usage sandpaper as a sanding material to remove old coating. This manipulation will allow you to sand out cracks and chips, and will also provide the paint with good adhesion to the surface.
4. Wiping first with a wet, then dry cloth to remove sanded particles and dirt.
5. Degreasing the surface with a special solution.
6. Apply primer recommended by the paint manufacturer (optional).
7. Sealing fittings (handles, decorative strips, technological holes, rubber seals) masking tape or film. Using masking tape you can create some kind of ornament or design. In this case, during the procedure you need to monitor the tightness of the adhesive tape to the refrigerator.
8. Protect floors and nearby furnishings with newspaper or magazines.
9. A preliminary test of the paint on an inconspicuous area will allow you to once again verify the correct selection of the desired color and the reaction of the paint (does it lie smoothly, does it have wrinkles or smudges).

It’s also worth noting that the best way to paint a refrigerator or any other interior item with your own hands is outside on a fine day. A strong wind will create artificial “smudges” on the surface, so if it is windy outside, painting activities should be moved to a well-ventilated area.

If you know how to draw well, you can create a real work of art on your refrigerator.

The refrigerator has gone through all stages of pre-treatment. Now it is time to begin the surface painting operation. Here the recommendations will depend on the type of paint chosen and the tools used.

Important: putting on a respirator and rubber gloves is prerequisite procedures.

Spray painting

If work is carried out using aerosols in cans, paint should be done at a distance of 30 cm from the surface of the unit uniform movements from left to right, without staying long in the same place to avoid smudges or too thick a layer. In a situation where an incident does occur, you can use a solvent, for example, one of the most familiar ones - acetone.

Painting occurs in 2-3 layers, between which a break of half an hour should be taken to allow each previous layer of dye to dry properly.

Painting with roller or brush

Apply a little paint to a roller or brush. Then comes coloring in a vertical direction or movements from left to right. After half an hour, a second layer is applied. Hard to reach places can be painted using a brush small size. If necessary, the third layer will hide all the flaws of the previous two.

To consolidate the result, give a glossy shine or matte effect and protect the fresh paint, you can coat the surface of the refrigerator with a layer acrylic varnish in aerosol form.

Painting a refrigerator at home is an excellent opportunity to give an old electrical appliance a new life and update the interior in an original way. For these purposes, it is worth spending several hours of your time, especially since such a decorative solution will delight the eyes of household members and guests for a long time!

Sooner or later appearance household appliances spoils, and we have to figure out how to paint the refrigerator at home. Of course, it won’t look like new, but we can radically change its design.

This opportunity should not be missed, so below we will describe the key stages of the recovery process appearance refrigerator.

Tools and materials

Paint selection

The first and most pressing question is what paint can you use to paint a refrigerator?

Of course, there is no single correct answer to this, so you will have to choose from several options:

• Initially, refrigerators are painted with enamel paints, and therefore it is quite logical to use them to restore the appearance. Moreover, for work you can use both enamels in jars and car paints in aerosol cans.
• Enamels have quite a lot of advantages: high-quality adhesion, durability, and pleasant. As for the disadvantages, they are associated with the rather high toxicity of solvents.

Note!
Car enamels usually contain components that provide resistance to weathering.
For our purpose, these substances do not play a special role, so it is not worth overpaying for super-resistant paint.

• Epoxy paints. According to their own operational characteristics These pigments are almost identical to enamels, but the process of applying them is more complicated. In addition, the price of high-quality epoxy composition is quite high.
• Acrylic mixtures. Since our purpose requires a fairly small amount of paint, choosing acrylic can be considered a budget solution. According to their characteristics, acrylic pigments are inferior to enamels, but for using a refrigerator at home, they have a sufficient margin of strength and durability.

Note!
Another advantage of acrylic is its wide palette.
If you are planning to implement original decor, the issue of color selection can become quite acute, so acrylic will be a good solution.

• When choosing what paint to paint your refrigerator with, don’t forget about restorative compounds. If the walls of the product are touched by rust, then Zinga electrically conductive paint or other materials containing zinc or aluminum granules will help prevent the development of corrosion.

What are we going to paint with?

Each option has both pros and cons:

• longer, and the quality of the surface may be slightly worse.
• On the other hand, using a roller and brushes for fine decoration will allow us to do the job more accurately, avoiding paint getting on the floor and walls.
• It is advisable if it is possible to either move the refrigerator to a sufficiently large open space, or to completely protect the environment from contamination. The result of using a spray gun is a thin-layer, uniform coating.
• Nitro paints are also usually applied using a sprayer, but for small areas it can be replaced with an aerosol can.

Note!
Fire-retardant metal paints Polistil and other similar products can also be sprayed.
True, using them to restore a refrigerator cannot be called justified, so it is better to use more suitable compositions.

• If you plan to combine colors, then to separate areas you need to use plastic film and masking tape. You should not use regular adhesive tape: the glue leaves marks on which paint then does not adhere well.

Coloring technique

Preparing the object

Before you repaint your refrigerator, you need to carefully prepare it.

This is done like this:

• We turn off the device and move it to where the painting will be done. Naturally, all food must be removed from the chambers!
• We remove all the fittings, and if this is not provided for by the design, we cover those parts that do not need to be painted with masking tape.
• Carefully wash the surface of the refrigerator using an anti-grease product. After washing, dry the device.

• We clean and sand the rusty areas and the place where the paint peels off from the base. If necessary, we perform leveling with quick-hardening putty.
• We treat the refrigerator with a degreaser.

When the grease-free surface is completely dry, you can begin to paint.

Decorating the refrigerator

Painting instructions include the following points:

• Before starting work, we protect the floor and walls from drops by laying newspapers and polyethylene.
• We stick tape onto the grease-free surface, marking the boundaries between the painted areas.
• Spray paint from a can or spray bottle in an even layer from a distance of about 30 cm. Move the nozzle from top to bottom so that there are no drips.
• If you are using a roller, then type on it a small amount of paint and move with vertical strokes.

Advice!
To find out how the paint will apply, we begin processing from the area that will face the wall.

• After processing, dry the paint. The time depends on the composition: from a few minutes for nitro paints to two to three hours for acrylic paints.
• We carefully inspect the painted surfaces. If necessary, we repaint, eliminating all defects.

As for the decor, it can be applied in several ways:

• The most common technology is surface finishing vinyl stickers. They perfectly mask defects and can radically transform the appearance of the entire kitchen.

• You can also paint the front side of the refrigerator acrylic paints. True, to protect the drawing, it will need to be varnished.

Conclusion

Recommendations on how to paint a refrigerator with your own hands should be followed as accurately as possible, otherwise the applied paint will begin to peel off quite quickly and the work will have to be repeated. The video in this article will help you master the restoration technology, so we recommend that you study it carefully before starting painting.

To transform the good old “white friend”, designer Tatyana Nazarova suggested gilding it a little.

Gloss blue paint distribute it evenly over the surface of the refrigerator. The refrigerator should turn completely blue.

Second paint, which was used for decoration, has a completely different texture - thicker, with a marble effect. It was sprayed with a thin stream and chaotic movements so that the design did not turn out to be too geometric. The golden pattern should not interrupt blue background, so you need to stop coloring in time. Ideally, the pattern should resemble light shiny scales.

Leaves and branches

User of our site Marina came up with a different image for the white refrigerator, reminiscent of golden autumn.

First the surface was sanded, then painted with brown acrylate paint for walls and ceilings with a regular paint roller. Then it was time for creativity: we went over the refrigerator with gold spray paint, painted brown branches on a gold background, and gold ones on a brown background, respectively.

The final touch - leaves: nylon blanks for decorating gifts were also covered with gold paint, glued to painted branches and slightly tinted brown.

Flower thickets

User Elena Belyanskaya made her battered pet light up with new colors and covered it with flowers.

Refrigerator outside washed thoroughly and degreased. Then red spray paint was applied. The paint was applied in two layers to achieve a dark red surface color.

After this, using acrylic golden composition started decorative painting. In the process, drops of paint were applied to individual areas of the flowers along the line of the petals and rhinestones were attached with glue. Tiny pieces of glass were used to decorate the center of each small flower.

At the bottom of the refrigerator To fill the space, painted golden grass with wildflowers appeared.

A high-quality refrigerator will last for decades without repair. It would be a pity to throw away a working refrigerator, but it is very dissonant with modern environment kitchens. Restoration will save you, but first you need to choose paints, get acquainted with the technology of work, and ensure safety for children and animals.

The industry offers compositions based on various film-forming substances. Not all of them are suitable for covering the outside of a refrigerator. Our task is to find suitable enamels - the most durable films.

The composition needs high adhesion - the paint must firmly adhere to the base, otherwise peeling of the top layer will begin with the first scratch. The film needs to be elastic, because the body is subject to thermal expansion. The painted surface is wiped clean detergents, the composition must be resistant to aggressive liquids.

Choose waterproof paint for interior metal work. Such paint coatings include:

• two-component primer-enamel for galvanized metal;
• alkyd enamel;
• heat-resistant silicone enamel;
• nitrocellulose composition for metal and wood - automotive nitro enamel;
• acrylic matte enamel for metal surfaces;
• polyurethane or epoxy paint.

Can be used as an aerosol or applied with a roller. We choose what paint to paint the refrigerator with exception.

We don't need paint on galvanized metal, there's no need to overpay for heat resistance - the refrigerator is located away from hot surfaces.

What paint to paint a refrigerator at home

The master’s task is to obtain a smooth surface, similar to the factory one.

The layer should be opaque, lie flat, and not flow down. It doesn’t matter whether you use the material in an aerosol package or use a roller or brush. The main thing is that the applied composition must dry and have no smudges. Then the next layer is applied.

The choice of color for the outside of the refrigerator depends on general design premises. You can create an accent spot or create a surface in harmony with the facade. The main thing is to use suitable covering and do the job carefully. Car paint is the most durable of all. Acrylic is made up on water based, odorless, the film is resistant to destruction. Epoxy is most durable when exposed to moisture. What paint to paint the outside of the refrigerator is up to you.

Application for painting refrigerator slate paint

Having researched the market paint coatings, we have found several compositions that experts advise using for work at home. Do you want to turn the walls of your refrigerator into a creative corner? Then you should use chalkboard paint for painting. The presence of composite particles in the composition will give the coating a slight roughness. The composition is created on a latex basis, the film is durable. On a dark, matte surface you can draw with chalk. The drawings are washed off with soap and water. As a stand-alone coating in a dark shade, it looks stylish.

The Finnish manufacturer Tikkurila is considered the best manufacturer of such compositions. Under this brand you can buy black paint Liitu. Sibiria is a domestic brand of slate, magnetic and marker compositions. Among them there are some with antiseptic properties.

Features of painting an old refrigerator

If you need a black refrigerator, buy a jar of Sibiria PRO or MagPaint from Holland.

Is it possible to paint a refrigerator with battery paint?

What is the difference between batteries and a refrigerator? Only because they experience seasonal heating. That is, the film must be elastic, withstand thermal expansion, adhere tightly to metal, be neutral to detergents and resistant to abrasion. The same requirements for the composition for refrigerators. Is it possible to paint a refrigerator and radiator with the same paint when creating a kitchen design? Which one to choose?

You need to find a product that does not change color under the influence of temperature, has good hiding power and decorative effect. It is better if the paint has no odor. We suggest you choose:

• alkyd enamel based on organic solvents is white base element, the coloring pigment is mixed additionally, the smell is strong before drying;
• water acrylic enamel odorless, only titanium dioxide-based paint is used for the refrigerator inside and out;
• organosilicon alkyd enamel, which contains special pigments that hide defects in uneven painting.

It is very important that all these compositions do not lose color over time; they can be decorated with a pearlescent additive.

Is it possible to paint the refrigerator compartment?

If the refrigerator compartment was enameled, rust will inevitably appear at the joints of the panels and in the cracks, no amount of cleaning will save you from yellow stains. Inner surface there is almost no ventilation, the air in the chamber is humid, it is difficult to choose coloring composition. The smell of paint from the refrigerator takes a long time to be removed. Special absorbers are used based on activated carbon and silica gel.

Only water-based acrylate can be used. But before that, you need to remove the rust, apply a special converter, degrease and prime the surface. It is almost impossible to remove odors and harm from other paints from the refrigerator.

It often happens that a completely serviceable refrigerator has become worn out, the furnishings have been changed, and it still works great, but has an unsightly lining. How to paint a refrigerator using the latest coatings, at home? We use experience, advice and videos from experts.

Painting a refrigerator at home

We will start with the refrigerator already empty of contents and everything that is not painted is unscrewed or covered with adhesive tape. The refrigerator body must be installed on a multi-layer newspaper flooring around the perimeter and under the bottom.

Before painting the refrigerator, the surface should be washed, free of rust and degreased. Rusty areas can be treated with a reducing agent. If there are chips, peeling, cracks, the areas are cleaned with a smooth transition to the enamel and treated with a primer. Each layer is dried according to the instructions, treated with fine sandpaper, and the surface of the refrigerator is brought to a perfectly smooth state before painting.

Let's determine the purpose of painting:

• renew the surface, leaving the same color;
• paint it in a different color that matches the wallpaper or radiator;
• create a designer coating.

How can you paint a refrigerator at home? One obstacle is that you cannot use powder paint - it needs to be baked in a special cabinet, this is not possible.

Automotive enamel is used to create a smooth, uniform surface. Paint the refrigerator aerosol can easily. In addition to the high price, the paint is toxic and requires intensive ventilation. A fine spray impregnates the dust and settles on the floor. It is important to choose the right place to paint the surface of the refrigerator. But the coating will be durable and will not fade.

You can use epoxy paints, but they are more difficult to apply and require skill. The coating will be resistant to detergents and glossy.

Water-based acrylic paints have a bright range, form a durable film, and are non-toxic. You can use a roller or brush to apply paint. You can apply to one place no more than 2 times, otherwise the film will end up on the brush. After the layer has dried, apply a second one.

How to paint a refrigerator at home, watch the video.

DIY refrigerator painting

The refrigerator has already been prepared for painting at home, cleaned of old defects, primed and sanded. The colors to paint the outside of an old refrigerator have been selected. It would be a good idea to stock up on old rags for wiping droplets and hands.

How to paint a refrigerator at home with your own hands?

The work site has been prepared.

Before you start painting a refrigerator at home, you need to protect yourself, flowers, animals and loved ones from inhaling harmful aromas. Protective clothing, respirators and several pairs of gloves will save your skin and respiratory tract. Is it possible to take the device out onto the balcony? Necessary if an aerosol is used. Dust settles on all surfaces and is difficult to wash off.

Using a brush or roller paint, apply a thin layer. First, check how the composition is placed somewhere in an inconspicuous place. The paint should be opaque and not flow down a vertical surface. Each subsequent layer is applied after the previous one has dried.

How to paint the outside of a refrigerator

Manufacturers offer several types of metal paints that can be used to paint a refrigerator. But are they all right for you? You may not tolerate fast-drying solvents. Then you cannot use automotive paints and epoxy compounds. Rubber paints - this is what acrylic compounds are popularly called for their durable thin film and are odorless. Created on the basis of an aqueous solvent, they are initially produced only white- there will be something to paint on old enamel inside the refrigerator. For getting desired color The powder is dissolved in the primary composition and stirred until the color is uniform.

You already know how to paint a prepared surface with your own hands if you primed the surface yourself. Paint is applied in the same way. Sand after drying and apply again until a uniform glossy surface is obtained.

There is a lot of educational material at your disposal; look at the photos on the topic of how to paint a refrigerator at home. The white stripes are adhesive masking tape.

Is it possible to paint the refrigerator a different color?

Most often, refrigerators are covered with film to change the color. But it is absolutely impossible to cover old “pot-bellied” refrigerators with rounded shapes. Is it possible to paint it a different color yourself? As with restoring the original color, you must first strip and prime. Changing the color of your refrigerator is easy. You need to apply paint very thin layer roller, so that old surface At first it was translucent. Each time, the layer must dry. And so on at least 5 times. At the end you should polish it. In this case good result will give the use of a spray.

Is it possible to paint a refrigerator with slate paint?

The new range of paints are classified as slate and magnetic types. The magnetic base contains iron and has attractive properties. Magnets stick to the surface.

Chalkboard paint creates a surface on which you can write with chalk. Durable latex-based film, slightly roughened by used fillers. Therefore, the chalk pattern lies flat. You can wash it off with plain water and soap. For a refrigerator, a drawing can become part of the decor. But most importantly, the color of the coating depends on the filler. Matt paint fits beautifully and looks decent.

An old refrigerator will be transformed and given a second life if you paint it slate paint. This is not difficult to do; a spray or canned composition is applied to the primed surface, as regular paints. You can find gray, golden, copper shades, but more often they sell black and dark green. It would be nice to decorate the surface; there are many options.

Video

We suggest watching a video on how to properly paint and restore an old refrigerator.