Choosing a gas heating boiler. Ratings of gas boiler manufacturers. Closed and open combustion chamber

If you have a gas main near your house, then the best and most cost-effective solution would be a gas boiler. And in order for your equipment to work smoothly and properly, you need to know how to choose gas boilers for heating a private home, what criteria and parameters need to be taken into account. Our review will help you understand the existing variety of models and make the right choice of a functional and convenient design.

A modern gas unit can be installed both in a private house and in an apartment

In some cases, a special boiler room is installed for such equipment

1 Areas of application of gas boilers for heating and hot water supply to a private home: types, pros and cons of designs

2 Gas boilers for heating a private home: how to choose the best option

2.1 Where to install the equipment: wall-mounted and floor-mounted gas boilers

2.2 Equipment and number of circuits

2.3 Types of combustion chambers

2.4 How to calculate the power of a gas boiler

3 How to properly replace old equipment with new one: installation nuances

3.1 How to install a gas boiler in a private house: installation requirements

3.2 How to connect the boiler and installation features

3.3 How to choose a voltage stabilizer for gas boilers

4.1 PROTHERM BEAR 40 TLO 4.2

4.3 AOGV-23.2-3 Comfort N 4.4 AOGV-11.6-3 ECONOMY

4.5 BUDERUS LOGANO G234 WS-38 4.6 BAXI SLIM 2300 Fi 4.7 VAILLANT ecoVIT VKK INT 366 5 Review of wall-mounted gas boilers: rating of the best models

5.1 WOLF CGG-1K-24 5.2 BAXI LUNA 3 COMFORT 240 Fi 5.3 NAVIEN DELUXE 24K 5.4 ROTHERM CHEETH 23 MOV 5.5 BOSCH GAZ 4000 W ZWA 24-2 A Areas of application of gas boilers for heating and hot water supply of a private home: varieties, pros and cons designs

If you can choose a good gas boiler for a private home, then this can be an advantageous solution compared to alternative options - solid fuel ones are not particularly convenient to use, and electric ones are too expensive.

Manufacturers of gas equipment offer different options for functional and high-tech equipment

Here's why you should choose a gas unit:

automated work that does not require your constant attention and control;

fuel is not as expensive as, for example, electricity;

you can start the unit at any time, and no preliminary preparation is required;

at proper care operation will be safe;

high level of efficiency;

Gas equipment can only be serviced once a year;

For the device to work, you do not need to provide access to electrical networks.

Important components of the equipment are shown in the diagram

The correct choice of unit will allow you to heat even houses with large area. If there is no gas line, then you should not ignore the use of gas cylinders. But this method requires special caution. For example, cylinders can be installed outside the house, and a special pipe can be installed from them. They must be covered from the outside. Most often, metal fences are used for this.

Wall-mounted unit for a summer residence. A sheet of steel is placed between the wooden surface and the equipment

It is worth studying some of the disadvantages of such units:

to connect to the gas line, a special permit is required;

you need to consider the possibility of regular maintenance;

gas leakage must not be allowed, as this will lead to an explosion;

There are certain types of boilers that require a separate room.

Double-circuit design provides increased functionality

When choosing a suitable device, pay attention to the heat exchanger. It can be steel, copper, cast iron or bimetallic. Copper options are known for ease of use. If they break, they can be easily repaired. If you value practicality, then the best solution would be bimetallic or steel heat exchangers.

The most reliable options include cast iron models, which heat up quickly and are resistant to corrosion. Such heat exchangers are more often used in floor structures.

Wall-mounted model for home

Boilers can be double-circuit, single-circuit, convection, wall-mounted, floor-mounted and condensing. But that’s not all that such equipment can differ in. There are also some design features:

the automation system can be in the form of mechanical control or based on electronic modules;

The necessary piping of the units includes circulation pumps, expansion tanks and all kinds of safety systems;

thermostats, remote control modules and special control panels can be used as control mechanisms;

Some models have boilers with different capacity sizes. These tanks allow you to store supplies of heated water for a certain period of time.

Double-circuit equipment has many applications

Let's consider the main classification of gas devices. Here are the main categories:

According to the installation method, the equipment is divided into wall-mounted and floor-mounted models;

for heating liquids into single-circuit and double-circuit;

According to the options for removing combustion products, the structures are turbocharged and chimney.

The unit can also be installed in the basement.

Wall variations appeared not so long ago. Inside the case there are all the necessary elements: expansion tank, pumping equipment, pressure gauge, heat exchanger and thermometer.

For installation of the device, a special room can be used, for example, intended for various household needs

For your information! Gas equipment is the most budget option for organizing high-quality heating.

Gas boilers for heating a private home: how to choose the best option

The choice of a gas boiler for heating a private house is influenced by such a parameter as power. For wall-mounted products, the maximum rating is 60 kW, and for floor-standing products it can be more than 100 kW. Also, when deciding on a model, it is worth considering factors such as cost and manufacturer. If there is no main line, then liquefied gas will do. In this case, you can choose a boiler with a burner.

Installation and maintenance of the equipment may only be performed by a specialist

Also look at the prices of gas boilers for heating a private house up to 100m2. This parameter depends on the manufacturer, construction material and additional functionality.

Wall-mounted models can have two types of burners: turbocharged and atmospheric. Gas boilers can also be condensing. They can be used at low temperatures. In this case, the gas is not consumed so quickly due to vapor condensation.

Some units can be quite massive

For your information! To choose suitable option Read the reviews first and study the opinions of experts and characteristics of different models.

Where to install the equipment: wall-mounted and floor-mounted gas boilers

The choice of equipment begins with the selection of placement options. You can purchase floor- and wall-mounted models of gas boilers for heating your home. The two varieties have certain differences and features:

wall-mounted devices do not rely on electricity. To prevent the unit from creating a large load on the wall, production tries to reduce its weight using different alloys. Such models will appeal to those who want to save more space; for example, they can be built into a cabinet in the kitchen. In addition, many people like the easy installation of wall-mounted gas boilers;

Wall-mounted option above the washing machine

floor-standing devices may have unlimited performance. There are double-circuit and single-circuit models with heat exchangers made of cast iron and steel. Such a device will take up a lot of space, so its installation should be thought out in advance. Depending on the configuration, the device may have an atmospheric or turbocharged burner.

Floor standing unit for boiler room

Floor-standing models are often equipped with cast iron heat exchangers. Wall-mounted options are compact. The price of a wall-mounted double-circuit gas boiler for heating a private house depends on the material of manufacture.

For your information! When choosing the appropriate option, consider the area of ​​the building. If the house is more than 200 sq. m., it is better to choose a floor-standing unit. At the same time, the price of a floor-mounted double-circuit gas boiler for heating a private house will be less than its wall-mounted counterparts, but they require a lot of free space.

Equipment and number of circuits

Gas units can be double-circuit or single-circuit. Each option has some advantages and disadvantages:

The operating principle of a double-circuit gas boiler is based on the flow-through heater mode. This option is used for heating and water heating. Most often it is equipped with two heat exchangers. To reduce weight, the equipment is equipped with a bithermal heat exchanger that operates in an interchangeable heating mode;

The diagram shows the connection option for a double-circuit design

a unit with one circuit is equipped for heating the coolant. In the future, it is possible to convert the design of a single-circuit gas boiler with an indirect heating boiler.

Single circuit design option

The devices of gas double-circuit boilers for heating a private house are much more compact, which allows them to be used in rooms with limited area. Double-circuit designs have a boiler and a gas water heater. If the DHW circuit is running, the heating function is switched off.

Single-circuit models are larger and have more complex installation. If a boiler is additionally used, the design can be equipped with circulation pumps. Devices with one circuit are equipped with a heat exchanger and burner.

The diagram shows the use of the boiler

Types of combustion chambers

In gas boilers, an open and closed combustion chamber is installed depending on the equipment option. There are three configurations:

atmospheric units are highly reliable and have a simple design. There is an open combustion chamber inside. In order for the gas to be burned, air is taken from the room. Regulation is carried out using thermomechanical regulators. When choosing them, remember that the disadvantage of such devices is the significant gas consumption, special requirements for installation. But at the same time, the efficiency of the device is not so high;

Features of the atmospheric device can be seen in the picture

a turbocharged model of a floor-standing gas boiler with a closed combustion chamber is equipped with two fans, for gas removal and for air supply. In this case, these processes are carried out forcibly, which is called using turbines or fans. Many people prefer such units because of their efficiency. Gas consumption can be reduced by 20-30%. In this case, the efficiency reaches 95-98%, but noise may be felt during operation;

The device of the turbocharged model

The most economical options include condensing wall-mounted double-circuit gas boilers with a closed combustion chamber. Their efficiency can reach 109%. The device is equipped with a modulation burner. These models are non-volatile. The heat exchanger contains a condenser or unit responsible for collecting condensate. The units operate on liquefied or natural gas. They are used for connection to low temperature structures.

Condensation equipment design

At home, equipment often operates according to a convection scheme:

the burner produces thermal energy;

the heat exchanger takes the heat;

the heat moves into the heating system, and the remainder is released into the atmosphere.

Convection operating principle

How to calculate the power of a gas boiler

calculations using online calculator. In this case, you need to enter the area, number of windows and doorways and level of thermal insulation;

the approximate power can be found using the approximate formula - 1 kW = 10 sq. m.

The table shows the calculation of boiler power

However, this indicator may vary depending on climatic conditions. For northern regions it is 1.3-1.5 kW, and for southern regions it is approximately 0.8 kW. It is important to take into account heat losses, which are influenced by the following factors:

window structures;

insulation of the attic or heated second floor;

presence of insulation in the walls;

the presence of external walls;

ratio of floor to wall area.

How to properly replace old equipment with new one: installation nuances

Over time, old equipment may need to be replaced as it ages and efficiency decreases. If the efficiency of the equipment has decreased, the unit is noisy and smokes, then this is a sign that it needs to be replaced.

Since such equipment is a critical and dangerous part of housing, its installation and maintenance are carried out by special government agencies. You cannot make a replacement yourself and without notifying the relevant structures. Incorrect installation can endanger the lives of many people.

Equipment replacement must be carried out by a specialist

If you need to replace equipment, here are the steps you should go through:

writing an application to a special responsible body. If the boiler is replaced with a similar one, its installation diagram remains unchanged. If you change the pipe supply diagram, location and type of the main unit, the project will need to be done anew;

After permission has been received, you must obtain a passport, which is submitted to the gas service.

The replacement of a gas boiler is carried out by a company that has a special certificate for carrying out such work.

Repair and installation are carried out using the necessary rules and regulations

Before you install new device The old one is being dismantled:

First you need to flush the entire system. This removes all old contaminants that could interfere with the operation of new devices;

all water from the heating system is drained;

the boiler is disconnected from the gas source, and then from the hot and cold water supply. There is also a disconnection from the ventilation system.

Gas equipment parts

How to install a gas boiler in a private house: installation requirements

There are special standards for installing a gas boiler. You cannot install more than two devices in a room with an area of ​​less than 7.5 square meters. Here are the requirements for installing the floor structure:

It is better to arrange a separate room for installing the boiler. It is important to ensure natural air flow through the grille or hole in the wall;

a separate hole is provided for supply and exhaust ventilation;

the chimney must be sealed so that carbon dioxide and smoke did not penetrate into the room. To do this, a smaller pipeline is installed inside the main pipe;

the room where you will install the device must be spacious enough to provide convenient maintenance and easy access to the device;

the floor covering must be made of non-combustible materials;

the width of the outer door should be approximately 80 cm;

the upper part of the chimney must be installed above the roof;

a separate valve must be connected for each device;

The walls of the boiler room are just being plastered. You cannot use materials such as plastic, fiberboard or MDF for finishing.

Adjusting the gas unit

In apartments, such equipment is often installed in the kitchen. There are some requirements for wall structures:

the wall must be solid to withstand the load of the equipment;

if the walls are lined with flammable materials, then a layer of some kind of fire-resistant material is installed between the unit and the wall;

the minimum distances from the device to the walls and ceiling must be at least half a meter, and to the floor - 0.8 meters.

Special equipment is used to install the device

Before installation work and commissioning of equipment, it is necessary to obtain permits.

How to connect the boiler and features of installation work

Installation of a gas boiler in a private house is carried out using different connection diagrams. Two pipes for coolant can be connected to a single-circuit device. In this case, the coolant will flow through the system and return for additional heating.

When using an additional boiler, a connection via a three-way valve is used. While the water is heating up in the boiler, the coolant stops circulating. How long it will take the boiler to warm up depends on the size of its container.

The structure of the gas boiler must be studied before proceeding with installation work

The connection diagram for double-circuit gas boilers is due to the presence of two heat exchangers. In this case, the main one heats the water for heating, and the second heats the water for water supply. 5 pipes are connected to this design. Pipe with coolant, line with cold water, gas, with hot water and with hot coolant.

Equipment installation requires a professional approach

The connection to the gas source is carried out by gas workers. In this case, a shut-off valve must be installed to shut off the gas. A special filter must also be installed. A pipe from the boiler runs through it, which should be made of stainless steel. The line is mounted to the pipe using a union nut. All joints must be sealed.

Particular attention should be paid to equipment automation, as this will not only ensure safety, but also save on fuel.

Important information! To check the tightness of the equipment, all joints are treated with a soap solution.

How to choose a voltage stabilizer for gas boilers

Which voltage stabilizer is best for a gas boiler depends on the following parameters:

response time affects the quality of equipment automation. This indicator means how quickly the stabilizer can adjust the voltage;

The voltage range is important, indicating within what limits the rectifier operates. When a certain value is reached, the mechanism turns off the equipment;

the degree of correction affects the stability of the output voltage;

operating temperature range is +5 - + 40 degrees.

Voltage stabilizer circuit

For a gas unit, choose a relay, inverter or electronic type of stabilizer.

Here is an overview of some floor-standing models from famous manufacturers. However, price categories can vary greatly. You can find cheap Chinese devices and expensive models with turbocharged combustion chambers. Among the manufacturers, it is worth noting such companies as Bosh, Baxi, Ferolli and Valliant. Among domestic manufacturers, it is worth noting the Irbis company.

Image

Prices, rub Protherm Bear 40 TLO 69600

Viessmann Vitogas 100-F GS1D870

ZhMZ AOGV-23.2-3 Comfort N 29700

Buderus Logano G234 WS-38 140500

Baxi SLIM 2.300 Fi 116300

PROTHERM BEAR 40 TLO The Prothern plant is located in Prague. Boilers from this manufacturer are characterized by durability and reliability. The Bear 40 TLO unit is resistant to difficult hydraulic conditions, and it does not depend on the electrical network. The equipment is used for hot water supply and heating. The design includes a heat exchanger made of cast iron and a burner made of stainless steel. Using the control panel, you can monitor and adjust the operating parameters of the unit. A cooling circuit is used for control to prevent overheating of the coolant. Electric ignition is designed for convenient starting of the unit.

The equipment is available in different variations, with power varying from 18 to 45 kW. It is used for heating all kinds of buildings with a natural type of circulation, and in some cases with forced circulation. The boiler can also operate on liquefied gas.

Protherm Bear TLO 40 Draft control for the chimney is provided. It is also resistant to complex hydraulic conditions. Additionally, you can purchase a storage broiler for heating water.

The advantages include:

high efficiency;

economical fuel consumption;

significant protection class.

VIESSMANN VITOGAS 100-F GS1D870

Floor-standing units are designed for heating domestic premises. Installation of indirect heating boilers is also provided. This model can last more than 15 years, thanks to a durable cast iron heat exchanger. The device operates on main gas, but can also operate on liquefied gas. Manufacturers recommend supplementing the device with a special voltage stabilizer.

The device assumes an open combustion chamber. It can function normally on both natural gas and liquefied gas. The design is installed on the floor and has an efficiency of 92%. The device does not have a circulation pump.

Viessmann Vitogas 100-F GS1D870

Here are some features of the Vitogas 100 F:

high operational capabilities under pressure fluctuations;

long service life;

use of silent ignition;

built-in pressure control relay;

compact dimensions and light weight.

AOGV-23.2-3 Comfort N The Zhukovsky Machine-Building Plant produces single-circuit AOGV and double-circuit AKGV models. The product range of this company includes more than 30 types of boilers. All devices have high efficiency. The price of a heating boiler for a private home depends on the configuration and materials. The equipment is equipped with both domestic and imported automation. It is used to operate systems with forced and natural circulation.

AOGV-23.2-3 Comfort N AOGV Comfort is suitable for heating residential and office premises. Installation of the device, its commissioning and commissioning is carried out by gas service specialists. The unit can operate on liquefied and natural gas.

The automatic unit allows for smooth adjustment of gas flow. In this case, it is impossible to leave the working mechanism unattended for a long time (more than a day). The equipment is connected to a separate chimney, but ventilation ducts cannot be used in this capacity.

AOGV-11.6-3 ECONOMY

The Economy model is one of the best gas units. It is suitable for closed and open heating systems. The design is electrically independent. Control and launch are carried out using an automation unit. The boiler has a reliable safety system that protects against overheating.

Heating a room is one of the first issues that arises when building housing or industrial space. And also for those who do not want to depend on centralized heating. To achieve these goals, you should select a suitable boiler. Before giving preference to any model, you need to take into account the size of the heated areas, the need hot water or connecting underfloor heating.

We have selected the top 10 best boilers based on customer opinions. This rating presents inexpensive and advanced models that correspond to the price-quality ratio and are the most popular among users in 2018 - 2019.

10 Navien DELUXE 24K

Its small size (695x440x295 mm) and weight (28 kg) allow it to be placed even in a small apartment kitchen. The closed combustion chamber makes it possible to work without a special hood, and electric ignition will allow you to forget about matches.

The unit is protected from interruptions in voltage and pressure in the system by a special chip, which is triggered when there is a deviation of 30% from the norm. Navien DELUXE 24K is designed to heat water at a speed of 13 l/min. Switching between the column and the boiler can be automatic or manual.

The remote control is completely Russified and makes it easy to control and configure. There is an economical mode that can be turned on when the owners are away from home to maintain heat. If necessary, all components are easily available in special stores.

Pros:

  • Remote control.
  • Reliability in operation.
  • Economical gas consumption.
  • Fast heating of the room.

Minuses:

  • Manual pressure control in the system.
  • A little noisy.

9 Buderus Logamax U072-12K


The boiler is suitable for any premises, thanks to the closed combustion chamber and compact dimensions. It allows you to configure the type of smoke removal depending on the room (3 options are possible).

A set of safety devices will ensure reliability and safety. It is not sensitive to changes in pressure and voltage in the network. Thanks to the built-in temperature sensor, the boiler is protected from freezing. The pulse tube ensures stable combustion.

Despite its low gas consumption, Buderus Logamax U072-12K provides high performance. The control unit with electronic display makes setting more convenient and easier. It is not only easy to install and configure, but also easy to operate.

Pros:

  • Easy installation and setup.
  • Protective functions at a high level.
  • Easy to maintain.
  • Quiet operation.

Minuses:

  • There is no weather-compensating automation.
  • There is no possibility of connecting heated floors.

8 Baxi MAIN 5 24 F


Its small size and classic white color allow you to hang the boiler even in the kitchen without breaking out of the overall style. It quickly and silently heats water and the room. The desired temperature can be set in the settings. But to turn on the heating you need sufficient water pressure. It has the ability to connect underfloor heating.

Baxi MAIN 5 24 F is very easy to use, thanks to its intuitive controls. It contains a display and buttons that will help you adjust and configure the desired mode.

The safety of the boiler is at a high level. Overheating, frost protection and pump blocking features ensure trouble-free operation. And self-diagnosis will indicate an error in operation.

Pros:

  • Multifunctional control.
  • Economical fuel consumption.
  • Doesn't take up much space.
  • Self-diagnosis function.

Minuses:

  • Doesn't work without light.
  • If the pressure is low, it does not turn on the water heating.

7 Protherm Panther 25 KOO


Single-circuit gas boiler designed for placement on the wall. The boiler provides the ability to connect a stationary boiler or heated floors. Thanks to the room thermostat, economical fuel consumption is achieved. And the Protherm Panther 25 KOO boiler control system makes operation easier.

Automated operation control, temperature regulation and equipment self-diagnosis will be provided by a special microprocessor. The safety system will prevent overheating, freezing and short-circuiting due to voltage surges. High-quality materials of the boiler parts make it possible to work in rooms with high humidity.

Pros:

  • Easy to use.
  • Easy installation.
  • Process automation.
  • Work in high humidity conditions.

Minuses:

  • Does not start on its own after a power outage.
  • Requires annual preventative maintenance.

6 Bosch Gaz 4000 W ZWA 24-2 A


The boiler is designed for heating and water heating systems. Thanks to the ability to regulate its power, you can adjust the desired temperature of water and heating. The built-in three-speed pump will ensure constant circulation of water in the system. Automatic operation adjustment makes operation easier. It is possible to connect external programming units, a thermostat and a weather-dependent controller.

Thanks to the closed chamber it works almost silently. Bosch Gaz 4000 W ZWA 24-2 A is designed for heating residential and industrial areas up to 240 m2. After a little reconfiguration it can run on liquefied gas.

Pros:

  • Unpretentious in everyday life.
  • Acceptable price.
  • Possibility of heating water.
  • Simple and convenient controls.

Minuses:

  • Powered by electricity.
  • No stabilizer included.

5 Protherm Bear 20 KLOM


Stationary gas boiler, which is designed for installation on the floor. Using a modulating burner, you can regulate the power of its operation (max 17 kW). Despite the economical fuel consumption, they achieve high heat transfer (efficiency up to 92%). In the Protherm Medved 20 KLOM boiler, it is possible to configure both natural and forced removal of combustion products. To provide hot water, you can connect a stationary boiler.

The built-in sensor monitors electric ignition and the presence of flame. A control system with an electronic display will not only help you set the comfort mode, but will also indicate an error code during self-diagnosis. Overheating and freezing protection prevents tampering normal functioning boiler

Pros:

  • Flame control.
  • Convenient controls.
  • Easy connection.

Minuses:

  • There is no DHW circuit.
  • The water circulation pump is not included.

4 Baxi SLIM 1.300i


The floor-standing boiler has proven itself to be unpretentious and reliable. It is intended for heating rooms and installing heated floors. Due to the open combustion chamber, the installation of a stationary chimney will be required. The ability to connect external control will facilitate operation.

Due to the built-in protection functions (error indication, self-diagnosis), Baxi SLIM 1.300 i will work reliably for a long time. It is possible to use a remote control with a climate controller, which is purchased separately. To provide hot water, a stationary boiler is connected. If desired, it can be reconfigured to use liquefied gas.

Pros:

  • Reliable in operation.
  • Compact size.
  • Easy controls.
  • Possibility of connecting a boiler and heated floors.

Minuses:

  • The ignition unit is weak.
  • A bit overpriced.

3 Ariston CLAS B 24 FF


The compact dimensions of this boiler and the ability to be placed on the wall allow it to be installed even in small room. It is designed for heating and water heating. The heating rate of running water is approximately 20 l/min. A built-in 40 liter stainless steel boiler will provide a constant supply of hot water. A conveniently located digital display will make it easier to control the operation of the boiler.

The Ariston CLAS B 24 FF has a closed combustion chamber and an internal fan, which takes air for ignition not from the room, but from the street. Thanks to this, it uses less fuel and provides good traction. This boiler does not require additional ventilation, so it can be installed in multi-story buildings.

Pros:

  • Built-in boiler.
  • Simple controls.
  • Economical gas consumption.
  • Not noisy.
  • Low level of waste emissions into the atmosphere.

Minuses:

  • There is no operating programming mode.
  • No filter at the cold water inlet.

2 Vaillant atmoVIT VK INT 324 1-5


The floor-standing boiler is designed to operate on natural or liquefied (retrofit) gas. High power allows you to heat not only residential premises, but also production areas up to 320 m2. To supply hot water, it is possible to connect a boiler.

A cast iron heat exchanger in 5 sections will ensure reliability and increase service life (due to the fact that cast iron is 2 times less susceptible to corrosion than steel). For stable operation from the network, the installation of a voltage stabilizer is required.

Since the Vaillant atmoVIT VK INT 324 1-5 boiler has an open combustion chamber, it requires the installation of a vertical chimney for the natural removal of combustion products. A control system with a display makes it easier to set up and control the operation of the boiler.

Pros:

  • Possibility of connecting a boiler.
  • Gas control system.
  • Automatic diagnostics.
  • Reliable operation.

Minuses:

  • The expansion tank is not included.
  • Heavy weight (99.9 kg).

1 Viessmann Vitogas 100-F GS1D871


Single-circuit powerful boiler, designed for heating residential and industrial premises up to 330 m2 in size. It falls into the category of floor standing boilers with high performance. Despite the atmospheric combustion chamber, it is very quiet in operation. The pre-mix burner reduces emissions of harmful substances and makes it environmentally friendly.

The reliability of components and protection programs require long term boiler service. Thanks to cast iron surfaces, it can operate at low temperatures and is not afraid of condensation. Viessmann Vitogas 100-F GS1D871 is easy to operate, thanks to the automation of all processes. Operation is carried out using the Vitotronic 100 digital controller. On its basis, high-output multi-boiler systems can be created.

Pros:

  • Full automation of processes.
  • Low temperature operation.
  • Large heating area.
  • Quiet operation.

Minuses:

  • No display.
  • It is not possible to work with a remote thermostat.

The heart of an autonomous heating system is a hot water boiler. Both the air temperature in the house and the amount of heating costs depend on its quality, functionality and efficiency. In order not to make a mistake in choosing this important device, it is necessary to study every detail and function of the device. The rating of wall-mounted gas heating boilers will help you save time on getting familiar with the equipment - the top positions in it are always occupied by equipment that has earned the trust and recognition of other users.

Classification of gas boilers

Lightweight and compact wall-mounted gas heating boilers are suitable for autonomous systems in individual cottages and city apartments. This group combines several types of equipment that differ fundamentally in terms of design and operation. Here is a list of the most important design features that you should pay attention to before choosing a boiler:

  1. Number of circuits: single-circuit ones are focused only on heating, and double-circuit ones provide hot water supply functions in parallel.
  2. Combustion chamber type: open or sealed (closed).
  3. Exhaust gas removal method: natural or forced.
  4. Energy dependence: non-volatile wall-mounted gas heating boilers operate without being connected to electricity.
  5. Burner type: atmospheric or modulating with automatic regulation power.

Diagram of a double-circuit boiler with a modulating burner and forced draft

Consumer ratings: independent choice of buyers

The best condensing boilers

Condensing boilers are more expensive, but the overpayment is more than compensated by economical gas consumption and high efficiency of heat generators, amounting to at least 95-98%. It is believed that the best wall-mounted gas heating boilers of this type are produced by the German company Viessmann.

Taking the lead in the condensing appliance segment is the compact and elegant Viessmann Vitodens 100-W with a maximum output of 35 kW and a hot water preparation speed of 14 liters per minute.

Device ViessmannVitodens 100-W

The second position in the ranking is occupied by the single-circuit Ariston Clas Premium Evo System 35 FF, adapted for low gas pressure. The device is equipped with a primary copper heat exchanger and a secondary plate-type steel heat exchanger. The maximum power of the device is 35 kW.

On the third line is the German Bosch Condens 5000 FM heat generator, which supports operation in a cascade and with solar collectors. The device is equipped with electronic control of the composition of the gas-air mixture and a unique heat exchanger with patented tube configuration technology.

Two in one: the best models of dual-circuit heat generators

Combination boilers solve two important problems at once: they heat the house and provide it with hot water. These devices are in demand among owners of individual buildings and apartment residents who do not want to depend on centralized hot water supply.

The Vaillant turboTEC PRO VUW with forced exhaust of flue gases and a built-in plate water heater with a capacity of 11.5 liters of hot water per minute earned the most positive reviews in this group. The device is equipped with a closed combustion chamber and a modulating burner. The efficiency of the device is 93%, power is from 8 to 24 kW.

Second place in the ranking is occupied by the Italian Baxi Main Four 240 F, capable of preparing 13.7 liters of hot water per minute. Baxi gas wall heating boilers are equipped with a closed chamber. The devices have traction control sensors, a thermostat to prevent water overheating, and protection against freezing and scale.

In third place is the German Bosch ZWA 24-2A with an efficiency of 95% and a water heating rate of 11.4 liters per minute. The device easily copes with servicing a house with an area of ​​up to 240 square meters. meters. The compact boiler is equipped with a three-stage circulation pump and an eight-liter expansion tank.

The Neva Lux 7218 double-circuit gas boiler was not included in the top ten, but it can be noted as one of the most affordable devices. The device is equipped with a biothermal heat exchanger, modulated burner, electronically controlled and LCD display. The domestic boiler is aimed at heating a house with an area of ​​up to 180 square meters. meters.

Five leading manufacturers of wall-mounted water heating boilers

The manufacturer plays an important role in the selection of boiler equipment. 70% of consumers are willing to overpay for a brand if its name is associated with product quality.


The first position in the customer trust rating is occupied by Viessmann - a reputable German manufacturer energy saving equipment. Wisman condensing wall-mounted gas heating boilers are equipped with a simulated burner that maintains combustion when the gas pressure is insufficient.

In second place is Protherm, a manufacturer of high-quality and functional equipment at an affordable price. The range of heat generators of this Slovak brand includes several lines of devices with open and closed combustion chambers and a wide power range.


In third place in the ranking of wall-mounted gas boilers is the leading European manufacturer of equipment for boiler rooms, Wolf. The German company's assortment includes models with different combustion chamber designs, with built-in heat exchangers for hot water and the ability to connect a boiler.

The fourth place went to the German leader Buderus. The Logamax series of wall-mounted boilers is aimed at Russian consumers and is suitable for operation under conditions of gas and water pressure differences.

The top five most popular manufacturers among Russian users is closed by the Italian company BAXI, whose product range includes single-circuit and double-circuit wall-mounted gas heating boilers, including economical condensing boilers.

The most attractive in price

Wall-mounted gas heating boilers domestic production recognized as the most affordable in the line functional models. Among Russian manufacturers EPO “Signal” is in the lead, its assortment includes 4 modifications of double-circuit devices of the Angels series. Angels boilers are equipped with a burner with electronic ignition and an automatic ionization-type flame control system.

In the middle price range are Korean wall-mounted gas heating boilers of the Navien brand, represented by groups of high-quality double-circuit devices with a separate and coaxial smoke removal system, operating uninterruptedly under conditions of low and varying gas and water pressure.

Wall-mounted model NAVIEN DELUXE

Daewoo is another Korean giant that supplies the market with inexpensive atmospheric models and economical boilers with a closed combustion chamber. For ease of control, the devices are supplemented remote controls and liquid crystal indicators.

The assessment of a group of consumers may not always coincide with personal opinion, so we recommend considering not only the models that received the most votes, but also other devices from well-known manufacturers, as well as new products that have not managed to win the trust of customers. In order not to make a mistake with the choice of durable equipment, it makes sense to seek help from a specialist who will take into account the needs of the family and real possibilities existing system heating.


Rating of the best heat generators. Review of the most popular models of wall-mounted gas heating boilers by group and a list of trustworthy manufacturers.

Source: teploguru.ru

Best deals

Choosing the best boilers - rating of double-circuit wall-mounted gas boilers

With the start of the heating season, the owners country houses The question often arises about which heating boiler is worth purchasing. This article is devoted to an overview of the most popular double-circuit gas boilers. The rating of double-circuit wall-mounted gas boilers was compiled for wall-mounted models from Baxi, Protherm and Navien.
We considered models that were similar in price category and technical characteristics with a power of about 20 kW and these were the following models: Main Four 24 F (Baksi), Gepard MTV 23 (Proterm) and Ace 24k (Navien).

Model Manufacturers

The Italian manufacturer Baxi is in great demand on the Russian market. Almost all regions of the country have service centers that repair equipment. Models are assembled and parts are produced in the brand’s homeland and in a number of European countries. Models with a capacity of 18-24 kW are supplied to the Russian market.

The Slovak manufacturer Protherm is known and distributed in all regions of the Russian Federation. The service network of this manufacturer is also widely represented in all major regions of Russia. The company produces boilers on its own territory; components are produced in Slovakia and Germany. The range of models imported to Russia is 11-23 kW.

The Korean manufacturer Navien was introduced to the world relatively recently, but thanks to practical design and affordable cost, boilers from this manufacturer quickly became popular. The production of parts and assembly of boilers is carried out directly in South Korea.


A very wide range of models with a power of 10-40 kW is supplied to Russia.

Design of compared models

The boiler from Baksi is a boiler based on a bithermic heat exchanger and the ability to automatically switch to DHW supply mode. The design includes a circulation pump, expansion tank volume 6 liters, safety sensors. All connections are cast from copper. The coolant is heated by a heat exchanger alternately in two circuits.

The boiler from Proterm has a copper heat exchanger for the primary circuit and a second steel heat exchanger for the DHW circuit. A three-stage control valve is provided to switch operating modes. It is also equipped with a German circulation pump and a 5-liter expansion tank, and safety sensors.

The connections, like those of Baksi, are cast from copper. An important difference between this model and the previous one is the presence of a second heat exchanger, which ensures independent heating of water for heating and the hot water system.

The boiler from Navien is also equipped with two independent heat exchangers, but both of them are cast from steel. Let us remember that the previous model had one of the heat exchangers made of copper. A steel heat exchanger is much more reliable than copper.


All built-in equipment - circulation pump, expansion tank, sensors and valves are manufactured directly in South Korea.

Technical parameters of models

The chimney of all the models under consideration is made according to the coaxial scheme. This means that the same pipe has two compartments, through one of which air is introduced into the boiler, and through the other, exhaust gases are removed.

Dimensions of the tested models (HxWxD, cm):

  • Baksi 73x40x29.9
  • Proterm 74.2x44x26.5
  • Navien 72.2x44x26.5

Heating capacity of models (kW):

  • Baxi from 9.3 to 24
  • Proterm from 9.0 to 24
  • Navien from 9.3 to 24

Volume of produced hot water (l/min)

All models are capable of heating an area of ​​up to 220 m2.


Model functionality

To compile a rating of double-circuit wall-mounted gas boilers, all compared boilers have the ability to adjust the burner and the function of maintaining the temperature in a separate heating circuit. In addition, all models have frost protection.

Models from Baksi and Proterm provide the ability to connect a room temperature sensor and an outside temperature sensor, thanks to which you can implement the climate control function.

Baksi, unlike other models, has a “warm floors” mode, and the Navien model has a remote control unit. In addition, the Navien boiler is protected from power surges.

Cost of models

Protherm 600 euros

Navien 500 euros.

Having analyzed the parameters of the boilers according to the indicated parameters, it is easy to conclude that the rating of gas boilers was distributed as follows:

3rd place. Baxi Main Four 24 F

2nd place. Proterm Gepard MTV 23

1 place. Navien Ace 24k



To compile the rating, this article examined the 3 most popular and similar models of wall-mounted gas boilers with two circuits: Baxi Main Four 24 F, Rotherm Gepard MTV 23 and Navien Ace 24k. The comparison of boilers was carried out according to such parameters as manufacturer’s popularity, design, technical specifications, functionality and cost. You can see the results of this comparison in this article.

Source: kotlobzor.ru

Found on the Internet:

08/28/2017 - Uzbekistan Daily

Tashkent, Uzbekistan (UzDaily.com) -- Ariston company began producing gas Ariston boilers HS X 24 FF in Uzbekistan. This is stated in the company's press release. Compared to floor-standing boilers, HS X and other wall-mounted models have higher efficiency....

08/09/2017 - RIA Dagestan

The amount of the fine varies from 40 to 100 thousand rubles. Many owners, especially those who have imported wall-mounted boilers in their apartments, are worried about the effectiveness of such “mass” maintenance. Therefore, before signing any agreement...

08/21/2017 - Kirovograd portal

If you buy a double-circuit boiler, then you kill two birds with one stone. It simultaneously provides the house with hot water and heating. The choice of gas boilers is huge. It is possible to choose floor or wall method installation, as well as the one that suits your...

05/24/2017 - Kazan Inform - news portal of Kazan (press release)

When you need to get a compact, fairly powerful and relatively inexpensive gas boiler for your own use, you should take a closer look at the wall-mounted version here https://st-atlant.ru/nactennie-gazovie-kotli, which is available with both an open and closed burner. ...

05/17/2017 - Construction portal Stroika.ru

A gas boiler is a reliable, relatively compact (depending on the model and manufacturer), durable unit. It will serve the owner of an apartment, house, or country cottage and will delight not only its technical and operational characteristics, but also its design. Give...

03/21/2017 - Construction.RU

Sales of imported wall-mounted gas boilers reached 100 thousand units. The share of atmospheric-type floor-mounted gas heat generators accounted for more than 400 thousand. At that moment, these were mainly Russian-made boilers priced up to 500 euros, that is, much cheaper...

14 best heating gas boilers for home

Advantages of installing a gas boiler for heating in Russia are obvious: gas supplies are more stable, it will not be turned off unexpectedly, and gas is cheaper than electricity. What do we need from a good gas boiler? So that the house is warm, so that the device is safe and lasts a long time.

Temperature readings for all models are approximately the same. All heating boilers comply with safety standards, but have more expensive models A complex multi-stage self-diagnosis system and effective automatic protective equipment have been installed. Reliability and service life are determined by the quality of parts and assembly (and, of course, you must follow the rules of use!). We studied the opinions of experts and customer reviews and selected the best models of gas boilers that combine reliability, safety and efficiency.

First, let's figure out which manufacturers of gas boilers deserve our attention first.

Which brand of gas boiler is better?

The vast majority of gas boilers in our stores are imported. Mostly European. In our opinion, the rating of the best foreign manufacturers of gas boilers looks like this:

  1. Wolf (Germany)
  2. Vaillant (Germany)
  3. BAXI (Italy)
  4. Protherm (Slovakia)
  5. Bosch (Germany)
  6. Buderus (Germany)
  7. Navien (Korea)

and some others.

Among our domestic manufacturers of gas boilers, we highlight two factories:

  1. Zhukovsky Machine-Building Plant (ZhMZ). Manufactures boilers of brands AOGV(single-circuit, heating) and AKGV(double-circuit, heating and hot water supply).
  2. LLC "Plant Conord" Located in the city of Rostov-on-Don. It produces gas boilers and heaters CONORD, solid fuel boilers DON, industrial boilers and other equipment.

Rating of the best popular models of domestic gas heating boilers

The leader of our rating is a double-circuit gas boiler for wall mounting, equipped with a closed combustion chamber and a forced smoke removal function. Air supply and combustion products removal can be carried out through concentric or separate air ducts/chimneys. Depending on the length used chimney The fan is capable of automatically smoothly adjusting the number of revolutions.

Key features of the model:

  • High efficiency rate;
  • No distance from the side wall is required during installation;
  • Possibility of connection to natural (mainline) and liquefied (cylinder) gas;
  • Quick start of hot water supply;
  • Soft start;
  • Light weight (40-42 kg) and compact dimensions;
  • Possibility of using WRS automation.

Main technical characteristics of Wolf CGG-1K-24:

  • Thermal power device - from 9.4 to 24 kW;
  • Two heat exchangers (primary copper and secondary stainless steel);
  • Expansion tank with a volume of 8 liters;
  • Productivity for hot water is up to 11.5 liters per minute.
  • Easy installation;
  • Reliable design;
  • High quality (made in Germany);
  • Warranty – 2 years.
  • Price (a controversial minus for a device of this level).

A very convenient and economical boiler, simple and easy to operate and maintain. In three seasons of use it has never failed. The best gas boiler for the home, a real “German” both in terms of workmanship and reliability.

The Baxi wall-mounted double-circuit gas boiler is fully adapted to the features of the Russian gas and water supply system. It works even when the inlet gas pressure decreases (up to 5 mbar). The digital control panel on the boiler body is removable, it can be installed where it is convenient for you (as additional function- wireless control panel). It will also be a temperature sensor in the room. Can operate on main gas and liquefied gas (after reconfiguration). A water filter is already installed at the inlet. It’s not for nothing that the gas boiler was included in the rating of the best - it is expensive, but the functionality and quality are at their best. The model is suitable for people who value the conveniences of life and want to enjoy all the achievements of modern technology.

  • adapted to Russian conditions;
  • works stably when the inlet gas pressure decreases;
  • removable control panel;
  • closed combustion chamber;
  • copper parts of the heat exchanger are protected from corrosion (special coating);
  • inlet water filter;
  • you can connect an additional boiler for hot water;
  • in the heating system - two temperature control modes (heating and underfloor heating);
  • it is possible to program work for 7 days;
  • an outdoor temperature sensor is connected;
  • digital LCD display with complete information about the operation of the device;
  • there is an electronic self-diagnosis system (plus memory for recent operating errors);
  • multi-stage automatic protection system (including against freezing of water in circuits, low water pressure, overheating, draft sensor, etc.);
  • There are many service centers in Russia, usually there are no problems with spare parts.
  • high price;
  • The electronic control system is sensitive to changes in electricity; it is recommended to turn it on through a voltage stabilizer.

This is one of the smallest and most affordable gas boilers on our market - a single-circuit (heating only) gas boiler AOGV 11.6-3. Production model of the Zhukovsky Machine-Building Plant. Classic shape and color, light weight, the ability to change from natural gas to liquefied gas (in cylinders), simple controls make this model popular among people who are economical or simply have low incomes. This gas boiler is the best option for heating a country house.

  • low price;
  • compact;
  • easy;
  • does not depend on the mains voltage;
  • unpretentious;
  • works well even at low gas pressure in the network;
  • built-in piezo ignition;
  • The service life declared by the manufacturer is at least 14 years.
  • small heating area;
  • the dial temperature indicator does not provide accurate information;
  • not such a perfect automatic protection system as in imported models.

Elegant Italian floor-standing convection double-circuit gas boiler. It has a built-in boiler - it’s convenient, and a closed combustion chamber - it’s safe. Suitable for Russian gas supply system features. It performs its functions well, even if the gas pressure in the system is low. It has a full set of automatic controls and protection - convenient and safe. You can additionally connect a timer and configure remote control. The temperature in the heating and hot water circuit is automatically regulated and maintained. There is only one drawback - the boiler is expensive.

  • beautiful appearance;
  • operates when gas pressure drops to 5 mbar;
  • can be converted to liquefied gas;
  • built-in 50 l boiler with pump and pressure gauge;
  • two temperature control ranges (heating, heated floor);
  • stainless steel burner;
  • smooth electronic ignition;
  • electronic indication;
  • possibility of connecting a timer, remote control;
  • there is weather-compensating automatic;
  • flame sensor;
  • efficient system self-diagnosis;
  • multi-level protection system (overheating, pump blocking, freezing, draft sensor, etc.).

Why did you choose Baxi Slim? I heard reviews about its performance from our local company Gorgaz. The boiler is very easy to install. In October, at an average temperature in the house of 22-23 °C, 265 m3 of gas was burned (for example, in November - 437). It turned out to be about 100 m3 less than with the old boiler.

Summarize. Which gas boiler is better to buy?

Gas boilers can only be used to heat a house ( single-circuit boilers) or additionally produce hot water (double-circuit boilers). Your needs are the first thing to consider when choosing the best gas boiler.

Double-circuit boilers are mainly wall-mounted. They are very convenient and take up less space. But their main disadvantage is the need to connect to electricity. This means that it will only work if there is light. And such a boiler should be connected through a voltage stabilizer so that the electronics do not fail due to surges.

Among the floor-standing models there are both single-circuit and double-circuit boilers. They are non-volatile and have high efficiency, but you will have to tinker with the placement of such a boiler.

So everyone has pros and cons. Our rating will help you choose a specific model. And let your home be warm!

14 best heating gas boilers for home


The best gas boilers - mounted, floor-standing - according to experts and customer reviews. Advantages, disadvantages, prices.

Source: www.expertcen.ru

Books

The best gas boilers for heating a private house, cottage, bathhouse and apartment

From this article you will learn which gas boilers are the best in their classes. The material will present the leaders, both among double-circuit and single-circuit devices, and also provide the optimal options for boilers for different rooms– houses, apartments, cottages and baths.


Which brand of gas boiler is best to buy?

The modern heating boiler market offers consumers devices in the most extreme price categories - from cheap Chinese equipment of dubious quality to expensive branded boilers with turbocharged combustion chambers and other bells and whistles.

Among the manufacturers, it makes sense to note the following companies: Baxi, Protherm, Buderus, Vaillant, Bosch, Viessmann and Ferroli. These are serious companies that have been present on the market for a long time, the quality of their products has been tested by hundreds of thousands of customers.

The best manufacturer of gas boilers from Russia is the Irbis company, whose products can be considered as a budget option. Although domestically produced boilers lose competition to foreign devices in terms of performance characteristics and ease of use, they perform their direct functions quite adequately.

Rating of the best gas boilers

There are several types of gas boilers, and therefore, when choosing a model for your home, you need to know exactly what you need. Let's briefly go through the classification of each type of heating equipment:

Single-circuit and double-circuit

Single-circuit gas boilers in the basic configuration are used exclusively for heating the room, while double-circuit gas boilers, in addition to heating the home, are also responsible for supplying hot water.

It is worth noting that, if desired, you can additionally purchase a boiler for a single-circuit boiler, and then it will be able to perform all the functions of a double-circuit boiler.

In terms of design features, these types have significant differences: double-circuit boilers are much more compact, which makes them an ideal option for rooms with limited free space, but they are also more demanding in terms of operating conditions. A double-circuit boiler heats running water, and in order for the hot water system to automatically turn on, the flow of incoming liquid must have high pressure, as a result of which saving hot water is practically impossible.

Also, double-circuit boilers are not the best solution for large rooms, where water intake devices - taps, showers, etc., are very distant from the boiler itself. This is due to the fact that a heating system based on a double circuit cannot be equipped with an additional circulation pump.

Single-circuit boilers also have their own characteristics, including large sizes and labor-intensive installation. When using a boiler, systems based on single-circuit boilers can be supplemented with circulation pumps to supply hot water to several water intake points, however, the efficiency of such a system is limited by the volume of the boiler.
It is also worth noting that the total cost of a system consisting of a single-circuit boiler and a boiler is higher than the price of a double-circuit boiler.

Floor and wall

Everything is simple here - floor-standing boilers are installed exclusively on the floor - they have much larger dimensions and power than wall-mounted counterparts, which make sense to use only in cases of limited free space.

As a rule, the power of most wall-mounted boilers is limited to 35 kW, as they have a copper heat exchanger that cannot withstand high temperatures.

Floor-standing boilers are the best option for heating rooms with an area of ​​150 to 600 sq.m. Depending on the configuration, floor-standing boilers can have either an atmospheric or a turbocharged burner. A distinctive feature of atmospheric burners is endurance, noiselessness and high price, while boilers with turbocharged burners have an order of magnitude greater efficiency, but are also significantly more expensive.

The best gas floor heating boilers

Having dealt with the classification of modern gas boilers, we move on to compiling a rating. To do this, we analyzed numerous reviews from owners of a wide variety of boilers and identified the best models in each class of heating equipment.

Single-circuit gas heating boilers

Let's start with single-circuit units, since they are the most popular types of gas boilers.

Single-circuit gas boiler for heating a private house - BAXI SLIM 1.490 iN


BAXI SLIM 1.490 iN

Baxi is an Italian company that is one of the leaders in heating boilers. Having studied the reviews about the equipment of this company, we can conclude that Italian boilers have best ratio prices and quality among all foreign manufacturers.

Baxi SLIM 1.490-N has the following advantages:

  • High gas efficiency - 90%, while most competitors in this price category have 85-87%;
  • Large heating area - 365 sq.m - the power of such a boiler is enough even for two-story houses;
  • Wear-resistant cast iron heat exchanger with a long service life;
  • Availability electronic systems protection from fluctuations in water and gas pressure levels, and from self-extinguishing;
  • Compact sizes.

Among the disadvantages are possible problems with valve tightness, which causes characteristic gas pops when igniting, which is often mentioned by the owners of this model. If they occur, you must contact the warranty service center. The valves are replaced by a technician within a few hours.

Heating gas boiler for a large house - Protherm Medved 50 KLZ


Protherm Medved 50 KLZ

Boilers from the Czech manufacturer Proterm have always been distinguished by their reliability and durability; all these qualities are fully characteristic of the Medved 50PLO model, which is one of the most popular single-circuit boilers on the market.

Advantages of Protherm Medved 50 PLO:

  • The presence of a built-in boiler with a capacity of 110 liters, which eliminates the need for financial expenses for the purchase of additional components;
  • The highest efficiency for equipment of this class – 92%;
  • Economical – natural gas consumption at a power of 50 kW is 5.2 m3/hour;
  • High electrical protection class IP40, which guarantees complete safety of operation of the device

Among the disadvantages of the model are:

  • The boiler can turn off when the gas supply pressure to the heating system is low;
  • Dependency on electricity - piezo ignition only works when connected to the mains.

As evidenced by reviews from owners of Protherm Medved 50 KLZ, this model is the optimal heating boiler option for medium-sized and large-sized private houses, both in terms of productivity and natural gas savings.

Powerful floor-standing gas boiler - Buderus Logano G334WS-73


Buderus Logano G134

One of the most powerful boilers for domestic use is the Buderus Logano G334, with a net power of 73 kW. This power is enough to heat a room up to 600 m2.

Let's look at the main advantages of the Buderus Logano G334:

  • The leading efficiency indicator is 93%;
  • Cast iron heat exchanger with a service life of at least 20 years;
  • Low noise level, thanks to which the boiler can be installed even in a living room;
  • Possibility of purchasing a large number of additional modules that significantly expand the functionality of the device.

Disadvantages of Buderus Logano G334:

  • Although the price of the boiler is quite high, it is not equipped with a built-in boiler;
  • High power does not imply economical gas consumption.

Reviews from Logano G334 owners indicate that there is a better option than G334 for heating large buildings, including production premises, today it is extremely difficult to find.

Floor-standing gas boiler for heating a small private house – Vaillant AtmoVit INT 164-564/1-5


Vaillant AtmoVit INT 164-564/1-5

Most of the boilers on the market are aimed at heating rooms from 200 to 300 m2, however, homeowners of small areas also need to purchase heating equipment. For them, the best option is the AtmoVIT INT-164 boiler from the German company Vaillant.

This model has the following advantages:

  • Power 15.8 kW, which is enough to heat rooms up to 118 sq.m.;
  • Due to low power it is possible to achieve maximum efficiency in 94%;
  • Availability of an electronic self-diagnosis system;
  • Attractive design and small dimensions - 85 * 51 * 7, with a weight of 82 kg;

The only significant drawback of atmoVIT INT-164 is the absence of VRC 420S regulators, which must be purchased separately.

From reviews of INT-164 owners, we can conclude that this model is the most suitable boiler for heating cottages, country cottages, as well as any premises up to 120 m2.

Gas boiler for garage - Alpine Air FL-8

Garages rarely have an area of ​​more than 40-50 m2, so to heat them it is rational to use low-power boilers, an excellent example of which is the Alpine Air FL-8. Like all low-power boilers, it has a high efficiency of 94% and economical consumption of natural gas.

Advantages of Alpine Air FL-8:

  • Compact dimensions 75*28*31 cm are ideal for any, even the smallest garage spaces;
  • Gas consumption does not exceed 0.95 cubic meters per hour;
  • Wide range of operating temperatures - from 40 to 90 degrees;
  • Low cost.

It is also worth noting that the Alpine Air FL-8 is completely stand-alone device, which does not require connection to the mains. Among the disadvantages of the model, the sensitivity to the pressure of the incoming gas can be highlighted - when its level drops below 13 mbar, the boiler can switch off spontaneously.

The best gas boiler for a bath - Kusaterm 10-20


Kusaterm 10-20 - gas boiler for baths

Gas boilers for baths, which are often called “ gas ovens", are quite different from traditional boilers, both in terms of design features and operating principles. Without going deep into the wilds technical characteristics Let's say that based on consumer reviews, the leader in this segment is obvious - this is Kusaterm 10-20.

Advantages of Kusaterm 10-20:

  • The presence of a fan for forced circulation of hot air, due to which the heating of the stones occurs much faster;
  • Effective thermal insulation made of FoamGlass, thanks to which the surface of the boiler body always maintains a low temperature;
  • High quality materials, reliability and durability of the device;
  • Convenient electronic control panel that allows you to quickly select the required boiler operating mode.

The Kusaterm 10-20 has one drawback - its high cost, but it is fully justified by the quality of this equipment. As the owners of Kusaterm 10-20 testify, a gas sauna stove makes preparing for sauna procedures a quick and enjoyable process.

Double-circuit gas heating boilers

Let's move on to double-circuit boilers– devices that are ideal for those homeowners who need to simultaneously provide not only home heating, but also hot water supply.

The best double-circuit gas boiler - BUDERUS Logano G125-32 WS


BUDERUS Logano G125-32 WS

In terms of efficiency, the best of the double-circuit boilers on the market is the Logano G125-32, its efficiency for the heating season is 96%, which is unattainable for competitors’ devices. In terms of reliability, this model is also one of the leaders - the G125 is a relatively new model, but according to reviews from the owners, it can be judged that no problems arise during its operation.

Advantages of Logano G125-32WS:

  • Possibility of operating the device on both gas and diesel fuel;
  • Minimum boiler noise during operation due to optimization of the amount of air supplied to the system;
  • Convenient control panel of combined mechanical-electronic type;
  • Possibility of equipping the device with modules that expand functionality.

The Logano G125 has no shortcomings as such, and given its moderate cost, this device can be confidently considered as the best double-circuit gas boiler for heating a private home.

The most reliable gas double-circuit boiler - BAXI SLIM 2,230

It is thanks to the reliability and endurance of its equipment that the Italian company Baxi has gained worldwide recognition. Baxi Slim 2.230 is the most reliable gas boiler, which has a number of electronic protection systems that significantly extend the operating life of the device.

Benefits of Baxi Slim 2.230

  • Availability automatic system self-diagnosis, thermostat, and frost protection systems, pressure reduction and pump blocking;
  • The optimal power for heating medium-sized private houses is 22.1 kW;
  • Possibility of connecting the device to underfloor heating systems;
  • Three built-in circulation pumps from Grundfos;

The DHW productivity of this model is 12 l/min, which is quite enough for a small family of 3-4 people.
If you are looking for a double-circuit heating gas boiler for a summer house or home, with an optimal price-quality ratio, then Baxi SLIM 2.230 is the best option.

The best wall-mounted gas boilers

Wall-mounted boilers are used mainly in apartment buildings. Their design is quite compact, which allows you to save the already limited free space of the apartment.

The best wall-mounted gas boiler - Bosch Gaz 6000 WBN-24CRN


Bosch Gaz 600 WBN-24CRN

Bosch is a new player in the heating boiler market, which has already gained popularity due to the highest quality of its products. The most popular double-circuit boiler from the German company is Bosch model GAZ 600 WBN, which is the most purchased wall-mounted boiler in Europe.

Let's look at the advantages of the Bosch GAZ 600 WBN:

  • High level of efficiency – 93.2%;
  • Economical gas consumption – 2.7 cubic meters at maximum power;
  • The presence of a turbocharged gas combustion chamber;
  • A complex of electronic systems for protection against overheating, pressure reduction and self-extinguishing.

The disadvantages of the model include the need to connect to the power grid, however, in apartments, problems with sudden power outages, as a rule, arise very rarely. In general, in terms of all its characteristics, the Bosch GAZ 600 WBN is an ideal gas boiler for heating an apartment.

The most economical gas boiler for the home - Protherm Panther 12 KTZ


Protherm Panther 12 KTZ

Protherm Panther 12 KTZ – perfect option for heating rooms up to 86 sq.m. It is perfect for both home and apartment. The boiler power is 11.5 kW, which is sufficient to maintain high temperature in housing even in the coldest time of the year.

Protherm Panther 12 KTZ has the following advantages:

  • Extremely economical gas consumption - 1.3 m3 per hour, which is achieved thanks to a turbocharged combustion chamber;
  • Compact dimensions - 90*41*57 cm;
  • Possibility of equipping the device with special jets for operation on liquefied gas;
  • Possibility of operating the boiler in low temperature mode up to 45 °C.

The owners of the Protherm Panther 12 KTZ assure that this model is extremely reliable - there are no reviews of its breakdowns or manufacturing defects.

Conclusion: which gas boiler is better to buy?

Let's summarize briefly. Before deciding which gas boiler to choose for a private home, determine the requirements for its functionality. For houses where a boiler or water heater is already installed, it is irrational to purchase a double-circuit boiler - it is a waste of money, but if you need to equip a hot water supply system, double-circuit boilers are the best option.

1. The best gas boiler for a house with an area of ​​50 to 150 m2 is Vaillant atmoVit INT 164-564/1-5;

2. Single-circuit gas boiler for heating a private house from 150 to 300 m2 - BAXI SLIM 1.490 iN;

3. Gas boiler for your own home with an area of ​​over 300 m2 - Buderus Logano G334WS-73.

The best gas boilers for heating a private house, cottage, bathhouse and apartment


The article discusses the best models of gas boilers from the world's leading manufacturers. Their classification is given and advice is given on the correct choice of heating devices for domestic use.
Share