Pistachio-colored kitchens combined with wood. Pistachio color in the interior of a modern kitchen. What colors are best to combine pistachio with?

It's very easy to make from plywood. To do this, you don’t need to look for space in the garage or rent warehouse space: a spacious kitchen and a mother-in-law who is a big fan of crafts are enough.

To make the process go quickly, purchase a six-millimeter sheet of plywood and paint from the building materials market, which are used to update the facade of the house. If you don’t have enough tools, ask a neighbor or rent one. A DIY stork for the garden is an interesting craft, but a little capricious. Patience is the main condition when performing work, otherwise you can drag out the work so much that they would rather buy metal figurines than wait for inspiration to strike you.

To make a stork for the garden with your own hands in a matter of days, follow these tips:

A piece of plywood should be rectangular shape, with sides of 850 and 580 millimeters.
It is better to use white paint. Buy black and red dye for it. With proper dilution, you will get an exceptionally long-lasting color.
Don't shy away from waterproof varnish: it will help protect your product from precipitation.
Half a meter of sandpaper is enough.
It is better to use an electric jigsaw.
Brushes are at your discretion.

Using the help, transfer the outline of the stork onto the plywood, if the design is already applied to a thin sheet of newspaper, plug in the power cord of the jigsaw and carefully cut out the body of your stork. To “put the bird on its feet,” you can cut out a stand from the remains of plywood.

Sand the edges in pieces sandpaper, cover with the first layer of varnish and let dry. Now you can take up the paints. Prepare 3 types - red, white, black. The first tone is on the nose, the second on the body and up to the middle of the wing, the third is applied to free places. Leave for 8 hours. Check the paint for strength and apply another layer of varnish on top.

You can use thin reinforcement on your legs. Attach it to the body and stand, cover it with red, deepen the places for the eyes with several blows with a hammer, fill the potholes with black and leave for a day. If there is no reinforcement, then you can use the old Stork for the garden with your own hands and pave it on the roof ridge if desired, if you screw the body to a mop, the wide part of which goes under the rafters, where it is nailed.

What else can you do for your garden with your own hands? Fly agarics made from hemp and basin, animal figurines from tin cans, a unique bed in pink tones.

But the stork is somehow closer to the heart of a Russian person. You can also make this noble bird out of plaster and clay, and it requires one plastic bottle, 500 grams of plaster, gauze bandages and metal rods that bend well, 3 spray cans

The beautiful and bright figure of a stork will add a touch of grace to the garden landscape, especially if it is made by hand. It may seem that making a stork is difficult and requires many years of practice in needlework, but the method of making it is simple and the materials are inexpensive. This sculpture will be an excellent addition to local area and decoration for flower beds, lawns and garden plot, symbolizing prosperity, well-being and family comfort of its owners.

How to make a stork for your dacha with your own hands: master class

A DIY garden stork is one of the favorite crafts of summer residents and gardeners, and there are many variations of its execution on the Internet, but the manufacturing principle is approximately the same in all cases, regardless of the materials used and the richness of the decor. Read how to make beautiful wooden signs for your home.

First of all, the head, neck, torso, wing frame and legs are made, which are connected with fastening tools.

The remaining time is devoted to the rather painstaking procedure of cutting, fringing and decorating the feathers - they will make up the plumage of the bird’s body, neck and tail. There are homemade options without using plastic bottles, but they are less common. Let's take a closer look different variants making a stork in this article.

Materials and tools for garden figure

The stork figurine consists of a head, beak, neck, body, legs, wings and white plumage with layers of black feathers. All parts are fastened together with a furniture stapler and seated with universal glue.

The body of a stork can be cut out from wooden block the required size, polystyrene foam or a 5-liter plastic canister.

1.5 and 1 liter plastic milk bottles;
plastic bottles of 1.5 and 0.5 liters for kvass or beer;
canister 5 l;
scissors;
glue;
self-tapping screws;
a piece of foam;
corrugated tube;
steel rods;
frame mesh;
thin wire;
sandpaper;
furniture stapler;
red acrylic paint.

The stork's plumage is also made from transparent bottles, but then the plastic under the feathers should first be painted with white and black acrylic paints.

Stages of manufacturing from plastic bottles

Having prepared necessary materials and tools, you can start making components crafts. About beautiful wooden fences find out with your own hands.

It is important that all parts of the stork’s body are proportional to each other.

Head

Using a sharp foam knife, the outline of the head with the beak is cut out, after which the surface is sanded and the edges of the beak are smoothed with sandpaper. If desired, the head can be painted with white paint - the coating will give the future product a rich white color and create an additional barrier from the sun, wind and rain.

The beak consists of 2 plates, which are attached to the head with self-tapping screws. For the beak, the neck and bottom of a dark plastic bottle are cut off, and the remaining part is cut into rectangular plates. Triangles are cut from the resulting blanks, which will subsequently become the upper and lower parts of the beak.

The plates are bent in the middle and screwed to the junction of the head and beak.

Paws

The legs are cut from 2 half-liter bottles with dark walls, after first cutting off the bottom. The fingers of the future bird are cut from the very edge to the neck of the bottle - you should get 3 in front and 1 in the back, and are bent outward.

Each finger is shaped into a long, sharp triangle using scissors.

Plumage

Processing blanks for feathers to give them a beautiful natural shape with feather veins is the most labor-intensive and time-consuming part of the work.

To cut out feathers, the bottom and neck of the bottle are cut off, and the cylinder of the bottle is cut into 6 equal parts - 6 feathers. They will different sizes: for the body plumage – small, for the tail – longer. Each feather must be given airiness by creating a fringe edging around the edges. He will tell you about metal forged gazebos for summer cottages.

Feathering on the neck can be done in 3 ways:

cutting out even smaller plates than for the belly, decorating them with fringe and curling them with scissors;
cutting off large plates the length of the neck and notching their edges;
cutting off half the bottle and making deep sharp cuts in the resulting plates.

Each feather is a rectangular plate made from a plastic bottle with a rounded or embossed edge.

Frame

It is convenient to make the stork’s body from a 5-liter canister, the handle of which is first cut off. Then a mesh mesh is attached to the container, to which future feathers will be attached - it is bent and cut into the shape of a wing.

Next, you can begin assembling the main part of the product - a neck tube is inserted into the neck of the canister, and 2 holes are cut in the lower part, through which a long piece of thick rod bent in half is threaded - these are the legs.

The grids are fixed with wire or steel brackets on the canister.

Assembly and decoration

The stork is assembled starting from the head - it is connected with wire to a corrugated tube and additionally fixed with hot glue.

The feathers are secured with a stapler, starting from the bottom of the canister and then upward in layers. The tail is attached to the back of the figure. The feathering is also applied to the mesh in layers, starting from the outer edge, and fixed with wire. In this case, black feathers are located on the outer edge. You will get only about 6-7 layers of feathers. The outer row connecting to the tube is screwed with self-tapping screws.

Prepared plates with sharpened edges from bottle halves are wrapped around the neck.

The number of feathers depends on the location of the wings: the option under consideration is designed for folded wings, but when flapping, the wing mesh is covered with feathers on both sides and the back of the stork is also made.

After assembling the bird, you can begin to creatively design the craft.

Eyes can be bought ready-made in stores that sell parts for knitted and sewn toys, and glue with hot glue. For insert eyes, choose large black beads or balls. You can also paint the eyes - with simple black or colored paints to suit your taste.

If you used transparent bottles during the work, you need to paint feathers before cutting them, after wiping the surface of the coating with an alcohol solution.

The beak and legs of the product also need to be painted with red paint. Alternatively, you can wrap them with red tape.

What else can you make a stork from?

Craftsmen manage to create masterpieces from everything that is lying around in the garage, including, and also use leftovers building materials after repair. You can safely take note of several of these variations of garden storks - making them will not be more difficult than the previous option.

From polyurethane foam

In this way you can create garden sculpture, making a turning and giving the stork figure a realistic image. The “skeleton” of the product will be steel frame– steel rods are welded to each other, and then other elements of the stork’s body are mounted on them.

To make a stork you will need:

5-liter plastic bottle;
polyurethane foam;
steel rods;
Styrofoam;
dye;
soil solution;
scotch;
rasp.

You need to put a bottle body on the frame, and attach sharpened pieces of foam plastic to each other with tape to the neck rod. Curly hips made of foam are secured in the same way.

Even with the use of waterproof plywood, the possibility of the sculpture getting wet in cold period increases during the year, so it is recommended to store it indoors before the onset of warm weather.

To make a stork you will need:

plywood;
plastic bottles with white and dark walls;
hot glue gun;
rods;
jigsaw;
self-tapping screws;
scissors;
screwdriver;
furniture stapler;
red acrylic paint.

It is advisable to first apply the elements of the body and wings on paper, creating a “pattern” of the parts before cutting them out on a sheet of plywood. The wings are screwed to the body with self-tapping screws. The legs are made of steel rods and are attached with staples to sheets of plywood that serve as the body. Sheets of plywood are also used for or.

Feathers are created from bottles, and each plate, in turn, is processed along the edges with scissors until an airy fringe is obtained. The plumage is applied to the entire surface of the stork, starting from the back: first, black feathers are laid out, and then white ones, from which the bird’s tail is also created.

Each workpiece is sanded along the edges and the surface is primed.

a layer of red paint is applied to the plywood beak;
You can draw the eyes yourself.

The rods of the paws can be sharpened from the bottom edge so that they can easily fix the product in the soil.

From foam plastic

Stork made of foam plastic – monolithic design, lightweight and easy to manufacture.

To work you will need:

foam sheets;
steel rods;
universal glue;
scissors;
saw;
furniture stapler;
sandpaper;
acrylic paint black and red.

First of all, the legs are made - the lower edges of 2 steel rods are sharpened, and the upper edges are bent for subsequent fixation in the foam body.

Main creative work working on such a stork is to create the correct foam blanks, because the finished bird will consist entirely of it. The body, head and neck are drawn in foam and cut with a saw. About plastic barrels for watering the dacha he will tell you.

Iron rods are stapled into the stork's body, its surface is sheathed with a layer of foam plastic for volume, and wing blanks are glued on top. The neck and head are mounted on a rod.

The stork's beak is painted red, and it is better to make inset eyes from beads or balls - this way the figure will be more expressive.

Next, the final modeling of the figure is carried out, giving it smooth and beautiful features with sandpaper and a knife. This is the case when you don’t have to make feathers for the bird - the embossed plumage can be cut directly on the body of the product, simply accenting the edges of the wings with black paint.

How to make a nest with a stork for the garden

The classic composition with storks in the nest traditionally symbolized cozy home With big family among the East Slavic peoples, indicated the fertility and cordiality of the owners. Installation of storks in the nest on own plot, flowerbed, roof of a house or area for recreation with children will help not only decorate the area, but also show guests that the owners are jacks of all trades. He will tell you about outdoor country washbasins.

Old wheels from a bicycle, cart, trailer or wheelbarrow will fit under the frame of the nest. You can weave a nest from bushes and live or dry branches, securing the entire structure with steel wire and installing it on a special platform consisting of X-shaped pads.

Video

How to make a stork from plastic bottles, watch this video:

Conclusion

The most labor-intensive work on a garden stork is creating its plumage - each feather must be worked on by hand, giving the edges a jagged or fringed shape so that they look like natural bird feathers.
Feathers from transparent bottles should be painted white and black so that they imitate the natural plumage of a stork.
Before painting the feathers, they need to be wiped off from dust and rubbed with an alcohol solution so that the paint goes on evenly.
The easiest way to make a stork is to make it entirely out of foam plastic and sharpen it with a knife and rasp until the desired shape; the simplest wing without a frame is made from a piece of plywood, which is screwed to the homemade body with self-tapping screws.
The body with a neck can be made from a plastic 5-liter canister with a cut off handle and neck, into which a corrugated tube is then inserted.
You can make a garden sculpture from the remnants of building materials lying around after renovation, and it will cost almost nothing. Additionally, you will only need to buy acrylic paints in order to draw eyes and color feathers.

A well-groomed and attractive garden will always please the eye. To make your garden more cozy, you can decorate it with various hand-made ones. Today we will talk about how to make a stork for the garden and what materials can be used for this.

Let's start with the simplest thing - PET bottles.

Option #1. Making a stork from plastic bottles

Before you start working, you need to take a small sheet of plywood and make templates from it. Templates need to be made in the form of the body and wings of a bird, as shown in the image. You will also need opaque plastic bottles (preferably white or black), red electrical tape and self-tapping screws. The procedure is as follows.

Step 1. First, you need to connect the previously made templates with each other using self-tapping screws. Plastic milk bottles will be used as feathers. The bottles should be cut into strips of equal width, and then a fringe should be made on the edges of each of them.

Step 2. Next, the finished feathers must be secured to the “body” of the stork using glue gun. It is typical that black PET bottles will be used for the lower body and tail (usually shampoo containers are used for this).

Step 3. The beak should be wrapped with red insulating tape.

Step 4. To make the legs, ordinary wire is used. Eyes for the bird can be purchased at any craft store. That's it, the stork is ready with your own hands!

Option #2. Making a stork from polyurethane foam

Now let's talk about another option for making a stork for the garden with your own hands. Now you need to pre-prepare plastic container for 5 liters, polyurethane foam, polystyrene foam and tape. The algorithm of actions should be as follows.

Step 1. First, the body parts are attached to the bottle using a container. For the neck, ordinary wire is used, lined with pieces of foam. The thighs need to be made in a similar way (using foam and wire). An ordinary large-diameter nail is quite suitable as a key.

Step 2. The workpiece will look like preliminary stage as shown in the image below.

Step 3. For the bird's legs (at least in this implementation) used electrodes are used. In the absence of electrodes, you can select similar material- for example, thick wire twisted into several turns, or metal rods made of thin reinforcement.

Step 4. So, all parts of the stork’s “body” have been assembled, but before proceeding to the next step, you need to carefully check the strength and reliability of the fasteners.

Step 5. After this, the entire layout must be covered with polyurethane foam.

Step 6. All excess is carefully trimmed off.

Step 7 Now the sculpture is almost ready. If the polyurethane foam has already completely dried, then the bird needs to be painted with acrylic paint.

Step 9 Natural feathers are inserted into the wings and tail to make the stork look as realistic as possible. Look how wonderful garden stork you will succeed (if you do everything right, of course).

Option #3. Making a stork for the garden from a canister

Before you begin, make sure you have the following: Supplies:

· five liter canisters;

plastic bottles (black and white);

· plastic tubes;

· thick wire;

· foam plastic;

After this, you need to perform the following sequence of actions.

Step 1. Cut out the foam blanks and use a knife to shape the head. Cut out the eye sockets and make the beak flatter.

Step 2. Use sandpaper to make the surface as smooth as possible. Place toy eyes in the eye sockets (we’ve already talked about where you can get them).

Step 3. Cut a beak from a plastic bottle and secure it with glue.

Step 4. From plastic canister make the body of the bird, cut off the handle.

Step 5. Cut a piece of mesh large enough to wrap around the canister. Round the mesh a little so that it looks more like wings.

Step 6. A thick metal rod must be bent and legs made from it.

Step 7 Feathers for the stork are cut from white bottles.

Step 8 After this, you can proceed directly to assembling all the elements. Work should start from the “tail”.

Step 9 For the “neck”, a corrugation (for example, from a vacuum cleaner) or something similar is put on the wire. The feathers are attached using self-tapping screws. Due to the fact that our bird’s wings are folded, feathers can only be attached to the belly and slightly on the sides.

Step 10 White bottles are cut in half, and a fringe is formed at the cut sites. The bottles are attached to the “neck” using tape.

Step 11“Wings” must be made from one edge of the prepared mesh. It is important that the second row covers the first by 1/3. On the third row, white plastic is used.

Step 12 For the “legs” of the stork, appropriate blanks are cut out of 0.5-liter bottles.

Step 13 All that remains is to paint the bird’s “beak” and “legs” red. That's it, your DIY garden stork is ready!

For a more detailed introduction to this manufacturing method, we recommend watching the thematic video material.

Video – DIY stork

We have all known the song from childhood “Stork on the roof - peace on earth” for a long time. And Alena Zinovieva, whom we already know from the village of Chastaya Dubrava, decided to place a couple of white storks in love in her garden, which symbolize peace in her friendly family. These beautiful birds are also made from waste material : polystyrene foam, metal mesh, plastic bottles and plastic canisters.

To make storks we will need:

1. Two 5 l canisters
2. Metal grid for wings
3. Strong wire
4. Plastic tubes for legs and neck
5. Foam for the head
6. White milk bottles
7. Dark beer 1.5 l
8. Hose from a vacuum cleaner (can be replaced with corrugated material)