Furniture making with my own hands- not only a way to save money, but also a fun activity. You can bring the most bold ideas, for example, create Coffee table ik. After all, this is not only stylish accent in the interior, but also a functional element of the room.
The procedure for making a table at home is as follows:
- We take a beam with a cross-section of 5x10 cm, cut it into three parts, several pieces each. For example: the length of the first part is 130 cm, it is necessary to cut 9 pieces of beams with this length. The length of the second part is 21 cm - 12 pieces. The length of the third part is 34 cm - 2 pieces. You can start by making a drawing of the table.
- The timber is placed in three rows. At this stage, you need to leave a small gap so that you can place the table legs there later.
- Remove two rows from the top. We begin to move the rest of the timber. This will give the table an original appearance. Then we make markings for the transverse parts.
- We lay the outer bars of the second row and put marks for the cuts. The cuts can be made with a hacksaw or saw. After which we secure the bars with screws.
- Let's move on to the third row. We shift the parts a little and secure them.
- Empty spaces appeared under the tabletop. They are for feet.
- The table needs to be processed protective composition.
Original coffee tables
Every person wants to have in their apartment unusual table so that it fits into the interior of the room and pleases the eye. This piece of furniture can be made from any material: wood, chipboard, drawers, etc. Let's look at several of these options.
Table made from waste paper
If there are old magazines and newspapers in the house, there is no need to rush to throw them away - perhaps they will serve you as material for the table. True, the interior design must be appropriate. By making furniture in this way, you can choose the table height you need and is comfortable for you. Process making a table from old newspapers and magazines height:
- We take waste paper and roll it into a tube, securing it with money rubber bands.
- We dilute the water-polymer emulsion. And put the rolled paper in it for 2-7 minutes.
- Then we dry the paper.
- We glue the bunch of cabinets with glue, you can use PVA. Dry it in a vertical position, securing it with thread in advance.
- We mark the strips and cut them.
- We glue the glass tabletop. The glass should be 12 mm thick.
Gallery: coffee table (25 photos)
Stylish table made of logs
This method is more complex in terms of execution than the previous one. The main elements for creating a table will be logs. It is taken as a basis wooden box, preferably on wheels. After which it must be furnished with logs. A homemade surface planer is also used for marking. After sawing off all unnecessary elements, there is no need to throw away the sawdust. It is better to collect them in any pallet. After this, the round pieces are glued to the surface. Sawdust must be mixed liquid nails. The mixture should resemble plasticine. Using a spatula, it is necessary to rub all the cracks between the rounds. Then, the product must be removed from all sawings and dirt, sanded and varnished.
DIY coffee table (video)
Creative curved table
Make a table like this It will be difficult on your own, but still possible. The main thing is to follow the manufacturing rules. For the design you need to take any type of wood. You choose the height yourself. The basis is taken from the property of wood, such as softening during dry heating. After which the form is saved. More details about production:
This table option is for those who love functionality and beauty in one item. With the help of simple manipulations he able to change height and appearance.
When assembled, it is a regular table for various waste paper. One has only to lift the two sides with legs, and it changes its usual size and turns into a dining room one.
Another transforming system is based on metal frames-pedestals. They are attached to the tabletop. In their usual position, that is, when assembled, they lie horizontally; if you change the size, the lid rises and rotates on hinges and becomes vertical.
When unfolded, the size of the structure is 73 cm. This height is acceptable for computer desk. Before making a transformer, you need to make a drawing.
DIY coffee table
For the manufacture of coffee table you need to take a sheet of chipboard. Its thickness is 16 mm. Make markings: find the center at the intersection of two diagonals. A nail is driven into the center, to which a thread and a pencil are tied. With its help you can draw a circle. If you want to make a table of a different shape, then draw the bends. After this, the shape is cut out using a jigsaw. The edges must be sanded.
The legs of the table are attached with screws. Paint the countertop itself in the color you want.
Table on wheels
If you have never made tables with your own hands, then you can try the simplest option. Let's consider making a model from chipboard. To make it you do not need a lot of knowledge and skills and expensive materials.
You can order cutting of laminated chipboard.
To make the structure you will need: a table top, planks, a shelf, a bottom, wheels, plastic corners, self-tapping screws, confirmations. When you have all the necessary materials, you can start assembling:
- First you need to make a shelf.
- Connect the tabletop and planks to plastic corners. The result is vertical slats to which you need to attach the shelf using a confirmant. To make her hold on tighter. the same must be done with the bottom.
- We attach the wheels using screws.
- At the very end, you need to seal the attachment points using self-adhesives.
As we have already found out, making a coffee table at home is not difficult. The article presents options that everyone can handle. Over time, you will be able to create the most original designs.
The height of a coffee table according to GOST should not exceed 50 cm, but no one forbids adjusting it to suit yourself. For example, the height of the transformer can be 73 cm. It is also worth noting that the table should fit your interior. Self-production Making such a piece of furniture is a fascinating process that will also save you money. A little imagination - and you already have an original product ready.
Coffee table is rightfully the most versatile and necessary element of the interior. Not a single guest room can do without it.
Often such tables are found in bedrooms, where it is used instead bedside tables. Also, a modern coffee table is even installed on the balcony, where it acts as a computer desk, unless of course the balcony is insulated.
With the help of this simple object furniture, any room can be given coziness.
In this article we will talk about what types of coffee tables there are and what they are made of, there will also be a photo of each type of coffee table.
Made of wood
Perhaps this is the most common option; it looks organic in absolutely any interior, except high-tech.
You just need to choose the right shade that looks harmonious with the rest of the furniture installed in the room.
It will not be superfluous if the design of the coffee table is made in the same style as the rest of the furniture.
From glass
If you want to decorate the premises in a more modern style, you will need a glass coffee table.
This design looks airy and weightless, largely due to the transparency of the material.
However, this does not necessarily mean that the legs of the table will be made of glass, maybe the most different material, it all depends purely on your imagination.
Made of metal
The material is not the easiest to process, so it is not surprising that such tables are the most expensive.
In addition, they weigh a lot, so moving them is not so easy. However, they are very durable and are not afraid of mechanical damage.
Coffee table in the interior: style varieties
Before starting renovations, carefully study interior design catalogs, and if there is a coffee table, then according different styles one can understand that such a simple object can differ not only in material, but also in design, purpose and decorative elements.
Classical
For classic style the most common one is optimal small table, made of glass or wood, it is also called coffee.
If you chose the first option, then you can decorate the legs or find an option with an unusual design.
The main thing is that they match the rest of the finishing items. If you chose wood, then look at the tone of the wood; it will look ridiculous if the table stands out from the rest of the furniture.
Provence
The key feature of this style is gentle, bed colors furniture, as well as naturalness, however, artificially aged items are often used.
For example, for a spacious living room it is better to choose a massive artificially aged coffee table, and in small room would be better suited model with several tiers.
Country
Most rooms ethnic style(yes, country is also ethnic) surprise people unusual ideas, and besides this, the unconventional use of even the most familiar things.
For example, it can be either bamboo furniture or a hand-made mosaic made from river shells.
Therefore, a country style coffee table should be made in unusual style, for example, from rough wood or simply from untreated logs.
Modern
Perhaps this is the very style where the designer’s imagination has room to run wild. Therefore, the material for the table can be even the most non-trivial, for example, stone or PVC (plastic).
The trick here is in the simplicity of lines and shapes. A drop creative approach and you will have a table that is guaranteed to attract the attention of your guests.
Pop Art
The key task of style is to transform a familiar thing into something unusual.
Therefore, these “works contemporary art» help turn an ordinary banal coffee table into a key element of room decor.
So don’t be surprised, you can see anything.
We use the coffee table for its intended purpose
Don't forget about direct assignment table, because its name already indicates that it is necessary for storing books, magazines and other household small items (chargers, remote controls, phones, etc.).
Therefore, it is not surprising that many modern models equipped with cabinets and drawers.
Moreover, they are not always installed inside the table; they can be both visible and hidden, which only the owner knows about.
Photos of coffee tables
Even a novice craftsman can make a table from scrap materials. But before assembling a coffee table with your own hands, it is better to review the drawings and diagrams in advance. This will allow you to decide on the shape of future furniture and cut off too complex options.
DIY drawings and diagrams of coffee tables
It is comfortable, lightweight and versatile. To make the frame rigid, the underframe is assembled from legs and a drawer - a rectangle that connects the legs and supports the tabletop. Otherwise, the legs will move apart and the table will lose its stability.
At the same time, the complexity of assembly does not increase much, but now you can store books, notebooks or other trinkets in the coffee table.
A special feature of this design is the absence of legs - they are replaced by four sidewalls, to which a ready-made folding mechanism is attached from the inside. It is fixed to it on a short pair of supports wide board- an underframe, and a double tabletop is attached to high supports, which, when unfolded, rests on the underframe.
Magazine table made of PVC pipes
The simplest and most economical, but very original version coffee table - make it from plastic pipes. The shape and height depend only on your wild imagination. It might be small round table, performing the function bedside table or a full-fledged coffee table with a glass top.
To create it you will need:
- pipes of two diameters - thicker for the legs and narrower for the base, for example, 16 and 9 mm;
- glue gun or tube of transparent superglue;
- medium grit sandpaper;
- a hacksaw for cutting plastic pipes (can be replaced with a wood saw);
- acrylic paint to hide the printed markings on the pipes.
The process itself is incredibly simple:
- Cylinders are cut to the selected length. 4 legs are made from a thick pipe - their length will be equal to the height of the future table (40-50 cm). 30 short cylinders are cut from a narrow pipe, on average 10-15 cm (depending on the shape of the table, the number can be changed).
- You need to start assembling the base from the center - this way there will definitely not be large gaps between the cylinders. Glue is applied to the entire surface of the contacting pipes. A little trick - to accurately glue the cylinders, liquid superglue is poured from the end of the pipes so that it flows down along the entire length of the joint. Glue gun the joints are simply processed from the outside - after painting they will become invisible.
- When the desired shape is achieved, the legs are glued - you need to make sure that the diagonal distance between them is equal. Otherwise, the table will fall over on one side.
- The final stage is painting. The easiest way to do this is with an aerosol method, although you can also use a simple paint brush.
When installing a glass top on your table, you should choose strained glass 10 mm thick. To prevent the removable tabletop from sliding on the base, use silicone shock absorbers for furniture.
If a permanent tabletop is planned, it is fixed with transparent silicone glue.
DIY wooden coffee table assembly
For admirers of classic style, there is nothing better than a wooden table. For this you will need to stock up:
- planed timber 40x40 mm - for legs;
- planed board 50x20 mm - for the drawer;
- ready-made countertop furniture board 800x400 mm (but MDF or plywood will also work);
- use wood putty to fill the holes from the screws;
- sandpaper or use a sanding attachment on a drill to process wood;
- varnish or paint - for finishing table
The tools you will need are a screwdriver (or screwdriver), a wood saw and a drill. After cutting the block into legs, and the boards into the frame, the assembly of the table itself begins:
- The underframe is assembled first. For convenience and ease of assembly, everything is done upside down. The sides are attached to the legs obliquely with self-tapping screws through pre- drilled holes. But it is also possible metal corners, if aesthetics are not so important.
Wooden tables are made not only from planed wood. If you have minimal woodworking skills, you can create original furniture even from firewood. For example, by selecting a wooden block of suitable height and a couple of Y-shaped thick branches, working a little with a sanding attachment and covering everything with varnish, you will get an excellent massive coffee table for the garden.
And if after building a house there are several euro pallets left, there is no need to rush to dispose of them. This is an almost finished table!
It is enough to sand and stain the surface, place them one on top of the other and securely connect them together. And to make the table mobile, 4 wheels are screwed onto the bottom, 2 of which have brakes.
Decorating a coffee table with epoxy resin
If there is a sawmill nearby and you can get a sawn board with a lot of defects for next to nothing, that’s just great! It is from such materials that the most beautiful tables, decorated with epoxy resin.
The process is labor-intensive, but not too complicated:
- The cut board is glued with wood glue into the tabletop. Smooth boards must be placed under the clamps for uniform fixation.
- After the glue has completely dried, the tabletop is sanded, all cracks and holes from knots are cleaned. Before application epoxy resin the surface must be cleaned of dust and small chips.
- To make the table glow effectively, use luminescent paint in powder. For 2 l ready solution resin you need about 100 g of paint. The resin and hardener are mixed 1:1, the dose should be measured accurately and so that the hand does not tremble. If you overdo it with the hardener, the resin will crack, while too little hardener will prolong the hardening period.
This tabletop is suitable for both a coffee table in the living room of a cottage and in the bedroom of a city apartment.
If you have a few meters of wooden blocks left at home, you can even make a table out of them! The video shows in detail and clearly how to make an unusual designer furniture from construction remains:
We will send the material to you by e-mail
It seems like people lived without coffee tables and can continue to live. But if you look at the thing from a different angle, it turns out that the interior becomes more perfect and complete, and the thing turns out to be very comfortable. I talked on the phone and put my mobile phone on the table. I read a book - it’s convenient to leave it on the table so that I can return to reading soon. Do I need to go and buy the product?
How more complex design, the more difficulties await you in your work
To create a table, take into account your physical and financial capabilities, availability necessary materials and tools, skills in handling them and free time.
How to prepare your own drawings with dimensions for a coffee table
Even those people who did not study drawing at school are faced with the need to work from drawings. To make some models, a drawing may not be required, but for a do-it-yourself wooden coffee table you cannot do without it.
The tabletop determines not only the appearance of the product, but also the decor of the room. It is not at all necessary to make a standard rectangular or square tabletop; its shape can be unique. Also, the type of countertop serves as a determining factor for which style the product will suit. It’s more difficult to work with glass without skills; if you don’t have any, it’s better to turn to a professional. The legs must be strong and be able to easily support not only the weight of the tabletop, but also the objects placed on top. The type of legs matches the style of the tabletop.
Tabletop
Legs for coffee table
Advice! You can take the legs from old furniture, cleaning them and processing them.
Related article:
: photo best ideas. What can be made from pallets for an apartment, office and cottage; rules for selecting and processing pallets; Master classes on making a table, sofa, bench, armchair and shelving - read our publication.
Making your own wooden coffee table
I really want a wooden coffee table like the one in the photo! If the desire to have a thing made of wood is strong, then there is no point in stopping yourself: arm yourself with tools, study articles on wood processing and teak, and “full speed ahead”!
Country style table made from a wooden barrel
The DIY coffee table made of wood and barrels looks amazing in the photo. Country style is not as simple as it seems, with such a table it is something sophisticated.
Making your own coffee table from chipboard
Relatively inexpensive material, and the finished product looks modern and stylish.
Let's try to make a table step by step:
- Creating a drawing.
- Preparation of material and tools.
- Working with a jigsaw - all the parts are transferred to a sheet of chipboard and cut out.
- The legs are attached to the back of the tabletop lying on the floor using furniture corners.
- All edges of the chipboard are glued with a matching furniture edge.
The more complex the drawing, the more attention is needed in the work.
How to make a coffee table from laminated chipboard
A plywood coffee table can be made in a short time. Advice for inexperienced craftsmen: cutting of all parts can be ordered at a building materials store. Based on the sheet thickness of 18 mm, we order 800×800 mm - tabletop, 460×100 mm - four slats, 700×500 mm - shelf, 700×500 mm - two bottoms, four plastic corners, eight confirmations and 3.5× self-tapping screws 16 mm (16 pieces should be enough). All elements must be covered with melamine edge.
Let's move on to the assembly:
- According to the drawing, we cut out the required shape of the shelf with a jigsaw. Be sure to use a wood carving saw with fine pitches.
- We screw the vertical strips to the tabletop using corners and self-tapping screws.
- In the middle of the slats you need to install a shelf on the confirmations. To screw them in, we pre-drill the holes with a 4.5 mm drill. Also, the confirmations need to be screwed to the bottom.
- All conspicuous confirmations are covered with stubs.
Advice! If desired, such a table can be installed on wheel supports.
Making a glass table with your own hands
For lovers of everything airy and spacious, a glass model is suitable. If you don’t have the skills to handle glass, it’s better to choose a table without unnecessary details.
Assembly:
- Drawing a drawing and making a cardboard pattern based on it.
- Cutting glass according to pattern.
- Sanding the edge with sandpaper or a drill at low speed.
The tabletop assembly diagram is shown in the photo below.
You can add a glass tabletop to a table made from car disks, barrels, wood, saw cuts, and pallets.
Making your own coffee table from scrap materials
Beloved by many creative people topic - how to use available materials for practical use. Products made from tires are especially popular - they are convenient to install in dachas and verandas, and from suitcases that have served their time as travelers.
Tire table
There are different ideas on how to use tires as a table. The good news is that such products are durable, original and take minimal time to manufacture.
Here are a few instructions for creating a garden furniture set with a small table at the head.
| Illustration | Description of action |
|---|---|
 | Prepare 11 tires of the same diameter. We take two tires on the chair and connect them using a screwdriver and self-tapping screws. For the table we take three tires. |
 | We cut out 4 circles from plywood (pressed shavings) slightly larger than the inner diameter of the tire, and one large circle for the table top. |
 | The result is a cute garden set. |
Suitcase table
Do you happen to have an old suitcase? How wonderful!
So, what is needed for such a rapid transformation? Four stable legs of any type - the main thing is that they are combined with the final decor option and easily support the product. Legs can be bought on Avito or torn off from old unnecessary furniture and made on lathe. You can use white enamel for painting, as it is easy to decorate. But, in general, the color can be any, even gilding. If the exterior of the suitcase is perfectly preserved, then you don’t have to paint it. If desired, you also need PVA glue, decoupage napkins, brushes, sandpaper, gold or silver acrylic.
First, paint the base and let it dry. All irregularities are sanded and a second layer of enamel is applied. Now we paint the legs and, as soon as they are dry, glue them furniture glue to the base. That's all the work! We turn the table over and admire the result of our labor.
How to make your own coffee table with additional elements
If the hostess loves rearrangements, or the table must be moved, as additional element Wheel supports are attached to the legs. It is very comfortable. If the table is small, then it can be served for tea in the kitchen and rolled into the living room. Other additional and functional elements are drawers. It turns out that the table becomes doubly more comfortable.
Table on wheels
To create a coffee table on wheels with your own hands, you need ready-made wheel supports. A small photo gallery of tables on wheels: they don’t have to be small, large metal or plastic wheels look even more interesting!
The wheels are attached to the legs when the supports themselves are already attached to the tabletop.
Table with drawers
There can be from one to three or four drawers, it depends on the table model.
To assemble a simple box, you need 4 small chipboard panels, wood glue, guides, and self-tapping screws.
After securing all the guides, check the smoothness and accuracy of movement. Then we assemble the box and simply insert it into the guides.
Do-it-yourself restoration of a coffee table: photos of interesting ideas
DIY coffee table decor is limited by the imagination of the creator. Any fantasy can be realized with effort. The decor must be selected to match the style of the room, otherwise dissonance will make the item superfluous. But if you don’t want to make a new coffee table with your own hands? Then you need to find out how to restore the old one.
Decoupage - interesting technique using PVA glue and beautiful napkins. If you want to make decoupage look antique, then use crackle varnish.
The photo below is the answer to the question of how to update a coffee table with your own hands.
If the furniture needs updating due to its condition, then the first step is to turn the table over onto the tabletop and check the fastening of the support legs. If something needs to be corrected, there is no point in delaying it - the furniture will continue to deteriorate faster. You can simply repaint the table, sand it and try painting it.
PVA is applied to the tabletop and scraps are laid. At first the leaves may lie unevenly, but as they dry they will level out. Finally, the product is varnished.
Article
Making furniture with your own hands is not only great way save money, but also the opportunity to put your creative potential into practice!
We will talk about making coffee tables with your own hands. There is no such thing as too many side tables. They can be placed next to the sofa to place a vase of flowers or a mug of tea, used as a bedside table or as a stand for potted indoor plants. However, monotonous wooden tables are unlikely to liven up a dull interior. I want something stylish and unexpected...
Stylish table made of wooden slats with your own hands
This bench can serve as a coffee table, extra seating or storage space indoor plants. This piece of furniture will “fit” well into almost any interior!
DIY coffee table photo
Materials:
Tools:
Step one: Using a hacksaw, cut the ends of two 2.5 x 7.5 cm boards at a 45 degree angle. Cut out fragments from 2.5x5 cm bars, the length of which will correspond to the internal length of 2.5x7.5 cm blanks.
how to make a coffee table with your own hands. Photo
Step two: Place 2.5x5 cm of the workpiece in the middle, and 2.5x7.5 cm on the edges. Make sure the ends of the inner slats are aligned.
Step three: Measure the distance between the outermost 2.5x7.5 cm bars and cut two pieces of this length from 2.5x10 cm boards. They will serve as lower supports for the bench. Secure them by screwing self-tapping screws into each longitudinal rail.
Step four: Using a Kreg Jig, drill two pocket holes at each end of the support crossbars. These holes will be used to connect to the 2.5 x 7.5 cm edge bars.
Tip: It is difficult to give specific recommendations regarding how far from the edge to attach a Kreg Jig. This depends on the length of the screws used, the exact thickness of the board, etc. We advise you to first practice on unnecessary scraps of boards.
unusual coffee table with your own hands. Photo
Step five: Place 2.5x7.5 cm blanks along the edges of the structure. After making sure that their ends are at the same level, secure them with clamps.
Tip: If you use soft wood (for example, pine) to make the table, place unnecessary scraps of boards under the clamp supports. Otherwise, marks from the clamps will remain on the wood.
Step six: Securely attach the outer 2.5x7.5 cm bars to the base of the bench by screwing 3.5 cm screws into the countersunk holes that you made a little earlier at the ends of the support crossbars.
coffee table made of wood. Master Class
Step seven: Measure the width of the fabricated base to determine how long you need to cut the 2.5 x 7.5 cm blank for the ends of the bench. We recommend that you make a cut with a small margin in length, and then slowly grind off the excess until you achieve the perfect fit.
Step eight: Wet the ends of all slats with water and apply a small amount of Gorilla Glue.
Step nine: Place the end boards in their intended place and secure the entire structure with a belt so that it does not fall apart while the glue is wet. For reliability, you can additionally secure the ends with several finishing nails.
Step ten: Sand the surface of the bench with 120 grit sandpaper to remove any rough edges at the joints. Fill all gaps in the seams and recesses from nail heads (the latter must be recessed into the wood) with putty. Once the putty is dry, sand the surface again, this time with 220 grit sandpaper.
Step eleven: Paint the bench. We recommend that you sand the surface again using 400 grit sandpaper and water before painting.
Step twelve: Install special mounting plates on the lower support crossbars to secure the legs. When attaching them, make sure that you drill holes in places where there are no screws already screwed in. The distance from the fastening to the edge of the base of the bench should be about 2.5 cm. Screw the legs themselves into the fastenings.
Coffee table made of copper pipes. Master Class
The material for making the next table can perhaps be called the most unexpected. This time we decided to tell you how to make a table with your own hands from... copper pipes OK.
Materials and tools:
The picture below shows all the parts (pipes (A-E) and various connecting elements(F-H)) indicating their sizes and quantities. All that remains for you is to take it in your hands pipe cutter and sit in front of the TV, which will brighten up the tedious cutting process a little. It's not difficult, just a little boring. 😉
When all the pieces are ready, you can begin assembling the lower part of the table. How to do this is shown in the figure.
Having assembled the lower tier, you can proceed to the upper one. The only parts not listed in the parts list are the four 2.5cm pieces of pipe that fit into the tees at the top. corner posts. Without these inserts you will not be able to put on decorative caps, because... the latter have the same diameter as the tees.
Reliable connection of the tubes with each other will ensure glue, but we recommend applying it only after preliminary assembly of the structure, i.e. after you make sure that all the cut tubes are the correct length and fit together well.
Wooden shelves, which you can pre-paint if you wish, are secured using special clamps that are placed on the underside of each board. Now you're ready to decorate your home with a new, handmade table!
DIY lightweight cement table
Countertops and other interior elements made from concrete have become increasingly popular recently. However, for all their attractiveness, they are not without a number of disadvantages. Firstly, pouring large quantities of concrete can sometimes be quite an expensive undertaking. Secondly, if we're talking about about small side tables, another serious problem comes to light - such furniture turns out to be too heavy. On the one hand, there is a desire to get a good, solid thing, on the other hand, you want to be able to move a table you made with your own hands without the help of professional movers. The solution found can be considered an insight.
Materials and tools:
Step one: Mark and cut out the foam sheet. From a 120x240 cm piece you can cut 18 squares of 40x40 cm. By stacking them on top of each other, you will get a parallelepiped 40x40x45 cm.
DIY foam table. Photo
Step two: Glue the cut pieces together. 3M Super 77 aerosol adhesive is ideal for this. It is better to perform this stage of work outdoors. Don't forget to wear gloves and a shirt long sleeve. Apply even layer glue to one side of the first square, then do the same with the second. Wait ~15 seconds, then connect the squares, making sure their edges meet. Repeat this until all the square pieces are joined into one piece. Wait about 30 minutes before moving on to step 3.
Step three: Now the most interesting thing... giving the resulting parallelepiped the outline of the future table. We decided to make a table in the shape of a cylinder. You can come up with something more original or, on the contrary, keep the original block with right angles. Cutting foam is easy and fun. Your design will have a rough, angular appearance at first, but don't worry! After the table is given required form, it's time for sanding. Using 36 grit sandpaper will quickly smooth out any rough edges. As you get closer to the ideal, gradually move on to sandpaper with a finer grain size. Do not strive to achieve a super smooth surface; at this stage it is important for you to achieve only the required shape.
Step four: The surface of the future table has been sanded, it’s time to cement it. The first layer, applied over the entire foam mold, will fill in the voids and texture of the foam. You only have ~20 minutes, so work quickly so you have time to smooth out any rough edges. Once the applied cement mortar has dried, you can apply the next layer. The number of coats depends on how smooth and even the final surface you want (usually four to five coats are required). It should be remembered that the smoother the surface of the final layer before it dries, the less sanding it will have to do!
Tip: When cooking cement mortar follow the manufacturer's instructions. You should not prepare more mortar than you need to apply one layer (for example, we used 220 ml of water and 450 g of cement). Make sure you don't forget to cover the surface of your workbench or workshop floor, because this job is quite dirty.
Step five: After the last cement layer has dried, you can sand the surface if desired. We wanted to achieve a glossy finish on at least the top of the table, so we sanded it using varying grit sandpaper ranging from 100 to 2000 grit.
Tip: If you are planning this operation, purchase a protective mask that will help you protect your lungs from cement dust
(The table made in this project turned out to be very durable and strong, but at the same time it weighed no more than a kilogram.)
DIY stump table
The material for the next table is sometimes literally lying under your feet. Even residents of megacities will be able to find a suitable stump if they wish.
log table. Photo
Materials and tools:
- wooden block;
- white acrylic paint;
- hand grinder;
- chisel;
- hammer;
- decorative upholstery nails;
- molar tape.
Step one: Find a table base! This should not be an old rotten stump, but a freshly cut log. Allow it to dry for at least 6 months (nothing is worse than waiting, but it must be done) until the bark begins to separate from the trunk.
Step two: Using a chisel, use a downward motion to carefully scrape away the bark from the log. If the stump is dry enough, you won't have to use too much force to do this.
Step three: By using grinder With medium-grit sandpaper, sand the surface, removing any remaining bark and smoothing out any sharp corners. Don't forget to sand the surfaces of the lower and upper cuts. Wipe the wood with a damp cloth.
Step four: It's time for painting. We used white semi-gloss paint that included a primer (we needed three coats for full coverage). You can choose a different type and color of paint, focusing solely on your taste. Don't forget to prime the surface of the wood first. Make sure you don't forget to trim the bottom cut.
Step five: Prepare decorative nails. Glue a strip along the upper edge of the side surface of the log masking tape, thereby marking the place where the first row of nails will be located.
Step six: Use a hammer to hammer in the first row of decorative nails. To ensure that the distance from them to the top edge is the same throughout the entire “line” of nails, use the strip of masking tape you previously glued as a guide. Once the first row is completed, repeat with the second and third row of nails (we needed almost 150 nails for three rows).
Tip: Cover the bottom surface of the stump with furniture felt so that you can move the table around the room without damaging the flooring.
The work is done. You can enjoy your new piece of furniture and be proud that you made this charming coffee table yourself.
Coffee tables: do it yourself
Wooden table: how to make?
Many people are interested in how to make a wooden table with their own hands to get a model with an original appearance. Let's consider one of the options.
To make an original coffee table with your own hands, you should take timber with a section of 5x10cm. It is cut into pieces of the following lengths: 130cm - 9 pieces, 21cm - 12 pieces, 34cm - 2 pieces.
The prepared timber is placed in three rows, leaving space for attaching the legs.
The top two rows are removed. The timber in the third row is moved slightly to create an interesting appearance. Next, mark the places for attaching the transverse parts.
Lay the outer bars of the second row and mark the places of cuts. Then the cuts are made circular saw or a hacksaw with a chisel.
The bars of the second row are secured with screws.
Lay the third row, move the parts and secure them.
Under the table top there is a empty place, in which they fix legs.
The wood is processed protective composition, preserving the wood texture.
Original model of a wooden coffee table with your own hands
First, to make a table with your own hands, prepare planks: 6pcs - 22.5x45cm, 2pcs - 22.5x41cm, 8pcs - 20x4cm, 8pcs - 40x4cm.
Planks 20x4 and 40x4 are glued in pairs. To ensure they stick together securely, they are clampedclamps.
While the leg blanks are drying, assemble box from the remaining parts. They are connected with wood glue and nailer.
Legs They are attached to the box with countersunk screws. Crossbars are placed between the legs at the bottom.
cover for a wooden table they are also made using 22.5x45cm planks. They are glued together, and then the resulting square is sawn into two triangles.
One triangle is secured with screws, and the second triangle is secured with slats so that it is removable.
All parts are sanded and painted.
Stylish coffee table. Master Class
Start making a stylish table with your own hands by marking the sheet Chipboard 16mm thick. The center is found on the sheet at the intersection of two diagonals.
A nail is driven into the center, to which a thin rope or harsh thread is tied.
A pencil is tied to the free end. This allows you to draw a circle.
If you want to make a table with your own hands that is not round, but of a more interesting shape, then the shape of the circle is changed by drawing curves.
The table top is cut out jigsaw or a reciprocating saw.
Edges are processed sandpaper.
Legs secured with screws. If they are located obliquely, then the slope should be outward.
Table surface paint in the desired color.
Simple coffee table
To make a coffee table with your own hands, take boards 40x15cm - 2 pieces and 50x19cm - 2 pieces. In addition, you will need legs and mounting plates.
A larger one is fixed on one of the boards plates for attaching legs. You should step back a little from the edges.
The sides and top of the table are secured with wood glue.
It dries in about half an hour.
DIY log table
A self-made coffee table with this appearance will decorate your cottage or country house. Work begins by assembling the frame. To do this, take sheets plywood two centimeters thick. A base with dimensions of 60x80cm is cut out of them. A box 68cm long, 45cm wide and 40cm high is attached to the base.
DIY log table. Photo
After this, thirty round pieces are cut logs 45 cm long and twenty-four round cuts, the thickness of which is 3 cm.
The prepared logs are secured around the perimeter of the box. Fixed from below to the base rollers. They are installed at a distance of three centimeters from the edge.
In addition to glue, it would be useful to secure the logs with screws from below.
Installed on the box plywood cover. Round circles are glued onto it. The space between them is filled with wood putty, which does not shrink when dried. Apply it in stages so that the previous layer has time to dry.
After the putty has dried, the surface polished. For this, a surface grinder is used. After this, the log table can be used.
Country style table
If you are interested in how to make a table from wood cuts with your own hands, then you should read the instructions.
They begin making such a coffee table with their own hands by choosing the appropriate material.
Selected slept We inspect for any interesting parts or parts that need to be removed.
Excessively rough, protruding parts are cut off. On the side where the tabletop will be, the surface level.
Used for work cleaver, which moves at an angle of forty-five degrees.
The sides also need to be leveled.
All surfaces polished, using ever-decreasing grain sizes.
Glossy varnish mixed with resin in equal parts.
The resulting composition is applied to the wood in a thick layer. It will take a long time to dry. If cracks appear during the drying process, they must be filled.
Bottom side clearing out. If there are voids in the tree, they are filled with resin gradually until the hole is filled.
If there are air bubbles in the dried resin, the surface is heated with a heat gun or burner.
A second layer of resin is applied and again left to dry for two days. The entire surface of the tabletop should be glossy.
The part of the ax handles is cut off at an angle of 22 degrees. The surface is sanded and painted in the desired color.
Mark places for legs and make holes.
Glue is poured into the holes and the legs are installed. Special pads are attached to each.
White coffee table
Make such a coffee table with your own hands from plywood And glass First, prepare a drawing and determine the dimensions. Then they proceed directly to production.
DIY coffee table. Blueprints
Plywood acts as a tabletop box with partitions, covered with glass on top. Triangular legs are attached to it.
You can make a door at the box to access what's inside, or you can lift the glass.
LegsFor a table with your own hands, it is better to cut it out of fairly thick plywood. It must be remembered that double legs are easier to make than large quantity single.
When all the parts are ready, they are assembled together and fastened. The table is painted or varnished.
DIY table made from pallets
If you know how to make a table from pallets with your own hands, you can get interesting option furniture for home. Pallets must first be sanded, sawn into pieces and primed.
table made from pallets. Instructions
A table is assembled from the prepared material. To do this, attach legs or wheels. A pallet directly or a surface assembled from individual planks can be used as a table cover.
After all the parts are connected, the structure needs to be painted or varnished. After this, the table made from pallets is ready.
Second version of a table made from pallets
To make such a table with your own hands, you will need one or two pallets. You should first draw a sketch of the future product, taking into account all dimensions.
The table will have a shelf for small things under the table top. The structure is assembled from prepared parts.
The surface is painted black, but this is not the only possible variant. There are many other decorating possibilities.
Coffee table stand
Option on how to make a table from copper pipes with your own hands, may be of interest to many craftsmen.
The pipes are first marked and cut. Then they are coated epoxy glue and assemble the base for the table.
This base is applied to the board and the fastening points are outlined. In these places you will need to drill holes by pipe diameter.
Four holes are drilled, but not all the way through.
The board is impregnated polyurethane and cover stain.
The remaining one is collected from the pipes frame.
Legs and base cover paint in the color of the tabletop.
Made from a piece of cloth pocket, which is hung on the transverse parts of the legs.
All parts are assembled together, adding epoxy glue for reliability.
DIY marine style table
This table is from an old one window frame looks very romantic. The frame is cleaned of dust. If necessary, replace the glass.
Wooden surface paint white acrylic paint. After drying, the paint layer is sanded so that the wood appears. An option is also available in blue and white.
To make the legs, take stalk and sawed into pieces of 34 cm. After this, it is treated with sandpaper to remove roughness.
The blanks are drilled in four places. Next, each leg is attached to the base, and the base with legs is attached to the frame. All this is done with self-tapping screws.
The legs are covered with coarse rope.
For peeled and low-fat glass glue sea souvenirs and seafood. They must be covered with glass on top, which is cut in the workshop to the size of the frame.
A loop is made at one end of the rope. The rope is glued around the perimeter of the frame, leaving the loop free. When the other end reaches it, an interesting sea knot is tied.
