It's time to freshen up the situation in the kitchen, but buying new kitchen furniture is not yet on the cards family budget? How to update kitchen set With minimal costs? Professional designers and decorators in such cases advise replacing the old tabletop and facades with new ones, repainting the “familiar” facades in a different color or covering them with self-adhesive film, and also updating the fittings. The most interesting thing is that an easy facelift of old kitchen furniture can be done with your own hands using simple improvised means.
There are ways that can change a boring kitchen set almost beyond recognition
How to update a kitchen set: self-adhesive film
The easiest way to transform old kitchen furniture is to cover it with self-adhesive film. Cheap and cheerful! By choosing a high-quality film with an imitation of wood, marble, tile, natural leather or stone, you can give your kitchen, if not exclusive, then a very decent appearance. The waterproofness of vinyl film, its resistance to high temperatures and mechanical influences will preserve the pristine beauty of your design impulse for a long time. If you know how to handle a centimeter and scissors, you should not have any particular difficulties with film facelift. The main thing you need is accuracy and patience.
Necessary materials:
- adhesive tape
- centimeter
- ruler
- sharp scissors
- stationery knife
- plastic smoothing scraper
The easiest way to transform old kitchen furniture is to cover it with self-adhesive film.
Step 1: We take measurements of the kitchen cabinets: facades, sides, drawers. For better and more convenient work, it is advisable to remove the facades and lay them on a flat surface.
Step 2: Remove the handles and other fittings. Use a damp sponge to thoroughly wash all cabinets and drawers, Special attention focusing on removing grease stains. There should be no traces of grease, dust or other contaminants on the surfaces to be glued. It should be perfectly flat, clean, dry and smooth. Otherwise, during operation in problem areas the film will begin to bubble and move away from the surface. After wet cleaning, be sure to wipe all cabinets dry.
Step 3: On a protective paper layer with reverse side The self-adhesive film is coated with a centimeter grid, which greatly facilitates cutting and cutting of the film. Celebrating required dimensions every detail. If all measurements are taken accurately, it is still advisable to leave a margin of 1-2 cm. In places where there will be bends, add 2 cm. If you have chosen a film with a repeating pattern, trace along the front side so that the repeats of the pattern match.
Step 4: We cut using a stationery knife along the ruler. We cut out curved patterns with sharp scissors according to preliminary markings with a marker or pencil.
A kitchen set covered with self-adhesive film with an elegant pattern immediately takes on a sophisticated and unusual look.
Step 5: After peeling off a couple of centimeters of the protective paper, apply the adhesive side of the film to the facade. Using a plastic scraper, smooth out the glued area to remove air bubbles and other irregularities from under the film. We do not glue the film all at once, but gradually remove the protective paper by 5-10 centimeters and carefully smooth out each area covered with a scraper. Take your time! Any bumps and irregularities will be especially noticeable on a plain surface, but on a variegated pattern they are less noticeable. Smooth out the film from the center to the edges. Small air bubbles under the film can be pierced with a thin sewing needle, and large ones can be cut sharp knife and smooth the film.
If the film lays unevenly during gluing, do not panic! It's not the end of the world yet. The matter can be fixed! The self-adhesive film will only fully stick after a few hours, so you have enough time to remove the film from the failed area and re-stick it.
Step 6: We perform similar operations with all other facades of the kitchen unit, as well as shelves and drawers. For a complete transformation, as a final touch, we change the furniture fittings, in particular the handles, but new ones and return the facades to their places.
If you just need to add a couple bright accents To refresh your interior with new colors and nuances, just use interior vinyl stickers. They can be applied to any furniture with smooth facades; they are made of durable material, so they are perfectly tolerated. wet cleaning and do not require careful care.
The most radical way to update a kitchen set is to replace old facades with new ones
How to update old kitchen furniture: replacing facades
Need a major budget redesign? Replace old facades with new ones! This is not only the most radical, but also the most expensive way to update old kitchen furniture, but it will still cost much less than buying a new kitchen set. If you have modular kitchen or a model that is still popular, it will not be difficult to purchase ready-made facades special labor. For exclusive and out-of-fashion models of kitchen sets, facades will have to be made according to individual order, fortunately, there are plenty of companies providing similar services today. When ordering a facade, you can choose not only an original design for your kitchen, but also optimal material in terms of price-quality. Economy options: inexpensive wood (usually pine), chipboard, plastic. A more solid new thing: facades made of MDF and solid wood.
For exclusive and out-of-fashion models of kitchen sets, facades will have to be made to order
The installation of new kitchen facades can be entrusted to specialists, who will certainly be found in the same company that manufactured them, or you can install them yourself. To do this, remove the old doors by unscrewing the screws and securing hinges. Finished doors and drawer fronts are usually sold unfinished in stores, so you will have to finish them using a standard 35mm hole saw. Having drilled new holes for the hinges, we fasten the doors to the walls using screws. Ready! Modern furniture is assembled easily and quickly. Anyone who has ever had to do home renovations will successfully cope with the installation of new facades.
How to update kitchen facades: molding and painting
Renewing the facades of old kitchen furniture using molding and painting is a simple and effective method
Great way A quick and easy way to redesign old kitchen cabinets is to use molding and paint. What is molding? These are decorative overlay elements that are widely used for decoration. various surfaces and structures such as walls and ceilings. Look around! Surely, various kinds of moldings are present in your interior. To decorate the facades of the kitchen unit, we will need thin semicircular strips.
Necessary materials:
- wood glue
- decorative semicircular molding
- Miter saw
- HVLP spray gun
- gloss deck paint
- drill
- furniture fittings
- screwdriver
- marker
Step-by-step instruction:
Step 1: Preparing the facades. Before removing the facades, we make the appropriate digital marks on each door and cabinet so that during installation we do not confuse anything and return everything to its place. We dismantle the facades, remove fittings and fasteners. Using a damp cloth, carefully remove all dirt. Wipe the facades dry with a dry cloth. Since we will use paint and varnish materials, it is advisable to carry out work not indoors, but on outdoors in a well-ventilated, covered place, such as under a canopy. work surface cover it with film and lay the prepared facades on it.
Step 2: Install decorative molding. By using miter saw cut the decorative molding into pieces of the required length. We file the outer edges at an angle of 45 degrees. We glue the finished planks to the facade, “planting” them with wood glue.
Step 2: Installing decorative molding is a simple but delicate operation.
Step 3: Using a marker, mark the locations for installing fittings and fasteners. We drill holes with a drill or hammer drill.
Step 4: Prime the surface. Fill the paint reservoir in the spray gun with primer. Apply the primer from a distance of 15-20 cm. Wait about an hour until it dries completely.
Step 4: Prime the surface before applying paint
Step 5: Painting. When the primer is completely dry, fill the spray gun with deck paint. We carry out painting in the same way as a primer at a distance of 15-20 cm. To create on the surface original drawing or ornament, you can use special stencils. If, after the final coat of paint has dried, unevenness and other flaws are noticeable on the surface, apply another coat of paint for a flawless result.
Step 5: Painting can be done with any in a convenient way- brush, roller or spray
Step 6: Installation of facades. Not a trace remains of the old facades! Go ahead and guess what to attach where. It's good that we took care of this in advance. Based on the digital markings on the facades and cabinets, we return each door to its original place using screws and a screwdriver. We install new fittings and admire the creation own hands!
How to update an old kitchen set with your own hands: decorative inserts
After a kitchen renovation, does your old kitchen set not fit into the new environment? No problem! The matter can be fixed! Decorative inserts made of wallpaper, self-adhesive film, ceramic tiles or rattan will help to update the design of old kitchen furniture.
Unusual way updating the kitchen set - using ceramic tiles as decor
We decorate kitchen furniture with ceramic tiles
How to give an old kitchen cabinet a facelift using ceramic tiles? As easy as pie! We remove the kitchen cabinet doors from their hinges, thoroughly clean the surface, and if desired, paint it in a suitable color. Using tile adhesive, glue the tiles to the facade. To make everything look as neat and beautiful as possible, we create a frame from decorative molding around the “tile applique”. That's it!
To make everything look as neat and beautiful as possible, we create a frame from decorative molding around the “tile applique”
We decorate the facades of an old kitchen with rattan inserts
Necessary materials:
- rattan fabric
- sharp scissors
- decorative wooden planks
- furniture stapler
- acrylic lacquer
- small furniture nails without heads
- sandpaper
- hammer
- brush
Kitchen fronts decorated with rattan inserts immediately acquire exotic look
Step-by-step instruction:
Step 1: We measure the front part of the doors to calculate how many meters of rattan fabric we need to purchase for finishing. The canvas can be purchased in the form of ready-made rolls or cut, which will cost much less.
Step 2: Place the roll of rattan fabric in the bath and thoroughly moisten it with cool water. Leave for about half an hour so that the material is well saturated with moisture. IN wet rattan increases slightly in size. After installation and complete drying, the canvas is stretched like a string.
Step 3: While the rattan “reaches the desired condition,” we prepare the wooden planks that we will need in order to press and attach the rattan fabric to the facades around the perimeter. The color of the frame should be in harmony with the interior of the kitchen and new finishing headset.
Step 4: If necessary, the color of the planks can be changed by covering them with acrylic varnish suitable color. Apply varnish to the planks and dry. To remove roughness, carefully sand the painted workpiece with fine-grained sandpaper. After sanding, apply another layer of varnish, dry and sand again. For a perfectly smooth surface, you need to apply 3-4 layers of acrylic varnish.
Step 5: Taking the rattan fabric out of the bath, roll it out on an equal surface and cut it according to the measurements taken. The doors can be completely covered with rattan fabric, but facades on which only the middle is decorated with rattan look much more interesting.
Step 6: Using sharp scissors, cut out blanks from rattan fabric. Using a furniture stapler, we attach them to the kitchen facades. We place the paper clips along the edges, then they will be covered with strips and will be invisible.
Step 7: To make the frame on the facades have beautiful, neat joints, place the planks in a miter box and file the outer edges at an angle of 45 degrees. We blot the sawn areas with a brush with acrylic varnish.
Step 8: Using furniture nails without heads, we nail the strips to the facades along the edges of the rattan fabric so that they cover the clips.
Designers consider various types of rattan inserts effective way kitchen furniture redesign
How to update your closet? If you have a closet in your apartment that has lost its original appearance, but which you would like to update, then you can do it yourself with minimal financial costs. You can update the cabinet façade, repaint the entire cabinet in a different color, or wallpaper it self-adhesive film.
Decorating a cabinet with ceramic tiles looks impressive and stylish, but is only possible if the doors are securely fastened.
An old kitchen cabinet or cabinets can be updated using leftover wallpaper, film, paint left over from a renovation, or other accessible and inexpensive methods.
How to update a closet using self-adhesive film?
One of the easiest methods for updating a kitchen cabinet is to cover it with self-adhesive film. You can choose a material painted to resemble wood, marble, natural stone or leather.
Such appearance will add to the kitchen cabinet original look. Vinyl film does not allow moisture to pass through, is resistant to temperature changes and mechanical damage, is durable and has a long service life.
Materials and tools:
- self-adhesive film;
- scissors;
- sharp knife;
- scraper;
- roulette.
Finishing cabinets with self-adhesive film is a simple and functional solution; the film is quickly applied and has moisture-proof properties.
First you need to take measurements of the kitchen cabinet, its fronts, sides, and drawers. To do this, the doors can be removed and placed on flat plane. Then you need to remove handles and other fittings from the cabinet. After this, you need to clean the surface from dirt using a damp sponge.
Particular care must be taken to remove grease stains. After cleaning, the surface should be perfectly flat and smooth. Irregularities and deformations can be eliminated using sandpaper. If the surface is uneven, then after gluing the film may come off and wrinkle. After cleaning the surface, it must be dried.
You might be interested in: Concrete and fake diamond: countertops
Then on the back of the film you need to put the dimensions of the cabinet parts. Add 1-2 cm to the main dimensions for reserve. Where the film will bend, you need to add 2 cm. If the film has a pattern, you need to arrange the parts so that the pattern matches.
After making the patterns, the material is cut using a sharp knife and ruler. The bends are cut using scissors.
Stickers on certain sections of the facades will refresh the kitchen interior.
Then they begin to cover the front of the cabinet with self-adhesive film. After peeling off a small section of protective paper from the film, it is glued to the surface. Use a plastic scraper to smooth out the material, removing folds and air bubbles. The parts are glued gradually, removing paper covering 10 cm from the back side of the film and straightening the material using a scraper.
If unevenness does appear in some places, then the film in this area must be peeled off and re-glued. The film is completely glued after a few hours. During this time, all irregularities and deformations can be eliminated.
Then the film is applied to the sides of the cabinet, drawers and shelves. After this, you need to replace the cabinet handles with new ones. Other fittings are also replaced. The updated cabinet parts are then installed in place.
If you need to update not the entire facade of the cabinet, but only its individual parts, then you can do vinyl stickers. These stickers are made from quality material, they are quite durable and practical, easy to clean and do not require frequent cleaning.
Return to contents
Updating cabinets by replacing facades
Materials and tools:
- cabinet fronts;
- screws;
- screwdriver;
- loops;
- drill.
The variety of facades for kitchen units gives room for imagination.
You can replace old facades with new ones. They can be ordered from furniture workshops. Facades can be made of inexpensive wood, plastic or chipboard.
You might be interested in: Kitchen countertop: how to choose the right one?
Ready-made facades can be installed with your own hands. First you need to remove the old doors by removing the hinges and unscrewing all the screws with a screwdriver.
In the finished doors you need to drill holes for the hinges. Then the cupboard doors need to be secured in place using screws.
Return to contents
Updating Kitchen Cabinets with Molding and Paint
Materials and tools:
- decorative strips;
- drill;
- glue;
- saw;
- screwdriver;
- pens;
- deck paint;
- marker;
- spray gun.
The use of molding will add nobility and style to simple doors.
You can update the design of kitchen cabinets by painting and gluing decorative elements (molding). Small strips with a semicircular cross-section are used as moldings.
Before removing the facades, you need to make notes with a marker so that later you can install all the elements correctly. Then you need to clean the entire surface with a damp sponge. Then the parts need to be dried.
It is better to paint outdoors, as paints and varnishes are toxic. The facades must be placed on a surface prepared for work.
Then use a saw to cut out necessary details molding. The edges of the planks are cut at an angle of 45 degrees. The molding is glued to the doors.
After this, mark the installation locations of the handles and screws. Use a drill to make the necessary holes.
Painting a cabinet followed by stencil painting is for the creative and daring.
Then the surface is primed. The primer is applied using a spray gun. After applying the primer, you need to wait an hour for it to dry completely.
Then the surface is painted. To do this, fill the spray gun with deck paint and apply it to the surface from a distance of 15 cm. Then, to create an ornament or patterns, take the necessary stencils. If deformations remain after the paint has dried, you need to paint the surface again.
Then the facades are installed in their place. Screw the screws with a screwdriver to the places marked with a marker.
You might be interested in: How to make a folding table?
After this, new handles and fittings are screwed on.
Kitchen is not only workroom housewives, but also a place for the whole family to gather. Therefore, this room should not only be comfortable and functional, but also bring beauty, coziness and comfort to others. The main detail of the furniture is its facade, which catches the eye first, therefore, its appearance must be at the highest level.
Replace kitchen façade – affordable way change the interior
Replacement of furniture facades can be done for several reasons. This could be a kitchen renovation with a change in interior design, wear and tear of materials, or the usual desire to refresh the decor in the apartment. Updating kitchen facades can be done in several ways. In order to decide on suitable method you need to approach each situation individually, based on many factors.
Do-it-yourself finishing of kitchen facades with rattan for a country-style kitchen
Option for transforming the kitchen after replacing the facades and apron in the kitchen
Replacing the entire kitchen unit is a very expensive undertaking, so restoring kitchen facades seems like a rational move, provided that the rest of the furniture is in good working order. There are three main options for replacing facades: covering with film, painting and replacing the facade slab.
Polyvinyl chloride film (PVC) is mainly used, which is the most in a simple way restoration of furniture facades. Advantages of PVC films – affordable price, ease of gluing and further operation, high resistance to changes in temperature and humidity (which is very important for a kitchen), a wide range of colors and patterns (the option of selecting the pattern of new facades for any kitchen design, from plain to imitation marble or wood).
One of the easiest ways to update a kitchen set is to stick film on the facades
The option of replacing kitchen facades is more expensive than film, but in this case the client receives full new headset, with the exception of its frame (as practice shows, it practically does not wear out during normal use). The cost of such restoration depends on the type of material used. The following materials are most often used for this technology.
- Chipboard or fibreboard. Wood panels have a number of advantages, the main one being price. Quality products These materials have good resistance to moisture and temperature changes. The plates can be covered with film, paint or enamel. The most expensive option is to cover it with a layer of wood, which creates the illusion wooden product when affordable.
Due to shine laminated chipboard visually the kitchen will seem larger
- Tree. It is made from a variety of wood species, looks expensive and noble, and is highly environmentally friendly. In operation, this material is durable and can be subject to subsequent repeated restoration. Among the disadvantages is the relatively high cost of the material.
Solid wood facades are an expensive, but high-quality and durable option
- Metal. Metal facades are perfect for modern or high-tech kitchens. Can be performed in various colors and designs (frames, showcases, patterns, etc.). Convenient to use (easy to clean, special coating prevents corrosion), but such kitchen fronts suitable for a narrow range of interior designs.
Metal facades for kitchens in high-tech style
- Plastic. Enough practical option, widespread in modern market. Withstands all types of cleaning, temperature and humidity changes, while for a long time does not lose its external presentability. A worthy option for the combination of price and quality.
Replacing kitchen facades with modern plastic – perfect solution, this wear-resistant material remains in its original form for a long time
- Glass. New facades made of glass, which are often decorated with patterns, grooved or tinted, look beautiful. They are easily washed off from dirt and tolerate any chemicals well. detergents. Among the disadvantages, it is worth noting the high fragility of glass.
Glass facades for the kitchen - a combination of external fragility with reliability
- Stone. The most expensive material, but kitchen facades made of stone have no disadvantages - they are the most durable, resistant not only to moisture, but also to chemicals, as well as mechanical stress. They have a wide range of models that will provide a decent choice for any kitchen design.
Kitchen facade made of artificial stone
Kitchen with MDF fronts covered with veneer
If the structure of the furniture material is in normal condition, and only the appearance needs to be changed, painting is an excellent option. Here everything is limited only by the imagination and financial capabilities of the master, since there are a lot of options with the type of paint and the possibilities of its application on the modern market.
Updating an old but strong wooden set by painting and replacing the countertop
To completely update the appearance of the facades, it is advisable to replace all furniture fittings, matching them to the updated style of the kitchen. With new handles and hinges the set will look much better.
Set with bright colors will look good in spacious rooms
Progress of work and necessary materials and tools
A standard set of tools is suitable for replacing kitchen facades
In order to inexpensively change the appearance of a kitchen by replacing kitchen facades, a home craftsman will need a number of materials and tools, the list of which depends on the chosen restoration technology.
- Film restoration. When finishing the facades of vinyl film, you will need the PVC tape itself, measuring device(tape measure, ruler), cutting accessories, roller or soft sponge, new hinges, handles, closers (accessories).
- For ease of use, it is advisable to place the surface to be glued in a horizontal position, having first removed it from its hinges. First, preliminary preparation should be carried out, which consists of giving the facade a perfectly flat surface without nicks or roughness. Then the facade should be degreased and allowed to dry thoroughly (in some cases up to 24 hours).
Degrease and level the surface
Peel off the cut out elements from the base
- Pasting should be carried out only after careful measuring and cutting of film blanks. It is recommended to prepare a film with a margin of approximately 20 mm on each side for each façade. Self-adhesive must be applied carefully, avoiding bubbles. A sponge or a construction roller will help with this. The last step is to install the new facade in place and install new fittings.
Updated kitchen facades using film
- Painting. For coloring facade surfaces You will need the paint itself and the tool with which to apply it. This can be a roller, brush or spray.
Restoration of facades using painting and decoupage
- At the moment, the gradient painting method is very popular. This method is more expensive, but the aesthetic appearance of the surfaces at the end of the work justifies this investment.
- Preliminary surface preparation also involves sanding and degreasing the surface. It is also important to prepare the room for painting by covering all interior elements to avoid unwanted paint getting on them.
Do-it-yourself renovation of kitchen facades and frame
- It is necessary to paint carefully and evenly. It is recommended to treat the facades with several layers of paint, after each previous one has dried. This will give the product not only aesthetics, but also greater resistance to external influences.
DIY kitchen façade painting
- New facade slabs. This finishing option can be purchased at furniture stores. If the kitchen set has non-standard dimensions, you can order the product according to the specified dimensions. In addition to the plate itself, for installation you will need a screwdriver, self-tapping screws, a drill, and measuring tools.
Use a Forstner drill to make holes for the hinges.
Using a screwdriver, attach a special tab to the wall of the headset case
- First you need to dismantle the old parts. This must be done carefully so as not to damage the frame of the kitchen unit. Using a drill, make holes in the new slab that should coincide with those left on the frame. Using screws, secure the slab to the sides.
We make marks in the center of the facade and make holes along them into which we attach the handles
Using a screwdriver, tighten the fasteners on the foot, aligning the structure at the desired angle
There is nothing complicated about replacing facades yourself. This work does not require special skills or highly specialized tools. If desired, you can turn to the services of specialists, whose range of services includes all stages of restoration from design selection to installation.
View of the kitchen before and after replacing facades with your own hands
Video: Restoration of kitchen cabinets.
Takes ~4 minutes to read
The old set was adjusted to the size of the kitchen, and everyone was already used to it. But here’s the problem: the facades are dilapidated, the hinges are loose. We can say with confidence that such furniture will last for a very long time if the plywood does not delaminate or the chipboard does not swell from getting wet. In this article we will tell you how to update an old kitchen set with your own hands.
Save
Current repairs are carried out according to plan:
- strengthening or replacing hinges (sometimes the hinge has to be moved to newly drilled sockets),
- sealing cracks followed by painting, pasting with self-adhesive film,
- decoration of facades in connection with the new kitchen concept,
- complete replacement of the countertop or thickening it on top of the old one.
The set requires maintenance and repair. The main destroyer of kitchen sets is not time, but incorrect installation. A crooked floor leads to skewed doors and loosening of fastening screws. Even before decorating the facades, all cabinets and cabinets must be checked against a horizontal plane.
How to cover a kitchen unit with self-adhesive film
The update method is suitable for laminate furniture. Careful preparation of surfaces will ensure a tight fit of the film.
Save
There is no need to start gluing right away; it is necessary to carry out the following preparatory work in the exact sequence:
- We remove the doors and inspect them against the light. Scrape off the dried fat tubercles, wipe with acetone or white spirit;
- We put the peeled edges back in place by gluing them;
- We rub the potholes with fine sandpaper, remove the dust with a vacuum cleaner, thin layer Apply acrylic putty. After drying, sand and prime with construction soil.
- Deeply damaged areas should be cut out, outlining the area according to the template of the inserted patch. The insert can be a bottle cap, wood veneer, or thin plywood. Then do the work from the three points above.
- A better fit will be achieved by varnishing. An important process for light film - every defect is visible on it;
- Gluing begins from the edge of the door (or along the edge of the drawer). Therefore it must be clean and absolutely straight.
Calculating the area of the purchased film according to the area of the surfaces to be pasted is not suitable. You need to decide on a sample, based on its width, draw on paper each detail to be restored on a scale of 1:10. Cuts and overlays will be immediately visible and will not last long. We start from complete cuts and put up with the inevitable remainder.
Subtleties of the matter
- The “wood texture” pattern horizontally and vertically on adjacent surfaces looks unnatural. It is better to choose a single direction for all facades.
- “Granite chips” require less thorough preparation, but mother-of-pearl will reveal any roughness.
- You need to start gluing the film from the wrong side, grabbing the top and bottom edges, leaving the side edges for completion.
- You cannot pierce the self-adhesive on the tubercles with a needle: dirt and moisture will accumulate in the punctures, and then the tubercles will increase.
- Very jagged edges can be smoothed out by gluing a PVC construction corner onto them. From the corner the film will lie more evenly. By placing even chips under the corner, you can adjust the distortion of the gaps.
Replacement of old furniture facades
We unscrew the old facades, remove them, and take measurements of the cabinet or hanging cabinet. We check the corners with a square. We eliminate existing distortions by laying corner clamps. Only from the newly restored corners can the exact size of the new facades be determined. For two door cabinets and cabinets, subtract 3 mm from the width - for the convergence point in the middle.
Cutting new laminate flooring with a hacksaw is a bad practice. Fine-toothed only circular saw at high speed you can avoid chipping. If House master If you decide to do everything yourself, the recommendation is this: you need to remove the plastic under the metal ruler with an awl and go deep down to the chipboard itself. The plastic is cut along two lines with an indentation equal to the width of the cutting tool (usually 2 mm).
When it is not possible to cut chipboard without chips, they use a 3D edge rather than a strip one. It needs to be filed on a chair, giving a length allowance of 3 mm (an edge of this type hides the corners of the shield). The same allowance - 3 mm - must be taken into account during cutting.
How to update old kitchen furniture with your own hands: painting, moldings
Those who decide to change their facades should pay attention to an excellent material - moisture-resistant plywood. It is light, durable even with through cuts, which is important for frame and openwork facades. In addition, two layers of 8 mm can be added to a thickness of 16 mm and not change the established dimensions of the old chipboard set.
Save
The required thickness can also be achieved using moldings. Semi-cylindrical, molded, flat, classical ancient Greek mutulas - all these configurations, superimposed on a spectacular background, will introduce clear lines and expressive style. Moldings create the effect of milled furniture victorian style. The weakest point of plywood - the edge - is protected with wood, for example, birch rulers.
Plywood sheets only need a primer before painting. Previously painted chipboard facades Without damage, you can not prime. It is impossible to re-stain stained stained wood. But you can paint it with high-quality acrylic or pentaphthalic paint, tinting it yourself or using a centrifuge at a tinting center.
Painting Tips
- Between the wide moldings, pearlescent acrylic varnish applied with a rubber spatula is expressive.
- TO wooden floor A wood-like pattern with the same shade as the molding is suitable. The texture is painted with two paints - a lighter and a darker one - using a fluted brush with thick bristles using the “wet” method.
- Plain surfaces will not show paint streaks if the paint is applied with an airbrush. Without stripes, you can paint with a roller. The roller should be velor, and the painting should be completed in one direction - rolling only up or only down on the facades of the entire set.
- A beautiful marbled pattern is obtained from shiny pentaphthalic paint. The background is rolled out with a roller. On a damp layer of several jars, apply spots with a brush - light, bright, with blackness. All are sharply different from the general background. A nylon plate cut from a container reduces the drops. You can mix it for 15 minutes. Then the surfaces are not used for 48 hours.
Save
Decorative inserts
Flat plastic inserts, composite marquetry, carved volumetric ones, embossed from metal - a desirable decor, subject to a certain style. But you can set a unique one a new style. Decoupage became widespread and became a total women's hobby. It is famous for its environmentally friendly technologies. Overhead rondos, ovals, boutonnieres, corners and appliqués are created, and sometimes the entire set is modified beyond recognition. The stylistic possibilities of the decoupage technique are wide: from archaic to ultra-modern techno.
Save
Decorating with ceramic tiles
History is silent about which modern master was the first to glue the remaining wall tiles onto the facade. But the traditions of using ceramics to decorate tables and artistic enamels on examples from the past are indicative. Of course, there can be no question of a layer of tile adhesive under such applications. Thin stripes and diamonds can transform a set and reliably protect the wood from external influences. The range is so wide that it can complement any style.
Save
A few examples:
Style | Type of tile | Tile options | Location | Mounting method |
Classical | Geometric constructions in the form of flowers, stripes | 6 x 6 cm, 10 x 10 cm, 12 x 12 | frieze (ribbon) under the tabletop, on overhead fixed flanges as pilasters, single inserts on the doors | Sticker, under wooden slats with selected quarter, behind brass profile |
Painted majolica | 4 x 4.6 x 6 cm | Rhombic diagonal order | Sticks |
|
Ceramics with a thin layer of glaze, composite plaques | 6 x 6 cm, 1.5 cm - on the edges | On the doors in the center | Sticks |
|
Glass, ceramics with a thick layer of glaze, not ornamental | Elongated forms from 2 cm in width, mosaic | Horizontal and vertical chains, arrangement of teeth as an unfinished construction | On smooth surfaces |
|
Japanese minimalism | Glazed ceramics smooth and textured | 5 x 5, 6 x 6, 10 x 10 cm | Vertical inserts between the slats of composite frame facades | Glue into the groove |
Non-story tiles with a thick layer of glaze, relief | No more than 15 cm on the side | Single on smooth surfaces |
To decorate facades, single “full-length” flowers, rivets, nail heads and entire still lifes are produced. Before gluing, any of the tiles are primed on the reverse side, dried, and only then glued to laminate or wood using assembly compositions. Glass mosaics on grids don’t even need that - they are installed right away.
Decoration with rattan inserts
Colonial, oriental, safari - styles that imply structural facades. Rattan weaving replaces glass and reliably protects facades from impacts. Palm gratings absorb moisture without warping the surfaces. Such qualities are extremely important for the kitchen. The range is also extremely wide: hexagonal weaving, transverse-longitudinal, combined. Plus - all kinds of colors.
Save
The fastening of rattan weaving is elementary:
- cut out the desired rectangle with a shoe knife under a ruler or metal scissors (secateurs are also suitable);
- fastened with a stapler to the facade with an indentation under the shaped strip,
- parts of the wooden frame are screwed (glued).
The cutting areas remain under the slats with the selected quarter.
But there is even more easy way Rattan fastening: by folding the seam edges onto the inside of the door. To do this, the cut just needs to be soaked. As the rattan dries, it stretches itself. This material should be approached creatively. A rich structure, pasted all over the place, can become intrusive. Rattan is beautiful between the wide slats of composite doors as an insert. The door slats can be straight, but even better - when they have round, oval, hexagonal “windows”. The curved shapes come into soft contrast with the clear rhythm of the weaving.
Renewal by varnishing
The stronger the smell of varnish, the more resistant it is to mechanical stress. Alas, but durable varnish without strong smell not yet created.
Save
The best varnishes are at the beginning of the list:
- nitrocellulose,
- alkyd,
- polyurethane,
- epoxy,
- acrylic.
There are a lot of “combi” varnishes with the partial addition of certain substances: shellac, resin, drying oil, acrylic suspension. The wide variety is associated both with the purpose of improving the compositions and with different purposes. It is often necessary to re-varnish surfaces containing lecithin (converted fats). Nitro varnish will no longer stick to this. In any case, varnishing is the most reliable way protect solid wood and paint on furniture. If you don’t like shiny shine, choose a matte composition. You can add particles for sparkle, tint to taste (tinting reduces transparency). By selecting the composition and mode of the nozzle of the spraying device, the varnish creates the effect of raindrops, bubble skin, silk, and mica plates.
Some varnishing tips:
- the first layer must be extremely thin, dry, and carefully sanded - a high degree of gloss depends primarily on this process;
- the varnishing roller must be made of fur that is resistant to caustic thinners; even before use, the roller is washed, even a new one, and the strength of the bristles is checked;
- the same requirement for brushes;
- Any brush lint or bristles that accidentally get caught are quickly picked out with an awl;
- varnishing is carried out only in a clean room;
- to avoid splashes, the spray nozzle is first tested on cardboard and only then the torch is transferred to the surface to be painted;
- using tinted polyurethane varnish to transform ordinary glass into tinted glass;
- varnish with a small “chameleon” additive becomes pearlescent.
Very important! Spraying any paints, even acrylics, is extremely harmful to the respiratory system. You need to work with a respirator.
Has your favorite kitchen set completely lost its presentable appearance, and the purchase of new furniture is not included in the budget at this time? There are several ways that will help you change your usual kitchen almost beyond recognition.
Adhesive tape. The simplest and most affordable option for updating an “old lady” kitchen is to cover it with a special self-adhesive film. This coating is quite practical - it is characterized by increased resistance to moisture, mechanical/chemical influences and temperature changes. By choosing self-adhesive vinyl with imitation brick, natural stone, aged wood, ceramics or leather, you can transform your old kitchen set in a matter of hours! Pasting kitchen furniture with self-adhesive film is carried out in the following sequence:- First of all, measurements are taken from facades, side surfaces, open shelves, drawers and other furniture elements that need to be updated. According to the data obtained (taking into account 10-15 cm allowances), film material is purchased.
- Then the fittings are dismantled and the necessary parts are removed. All elements are thoroughly washed in warm water with the addition of a degreaser, after washing they are wiped dry.
- Any irregularities and cracks found on the furniture are carefully cleaned with fine sandpaper and covered with putty or primer-filler. It is important that all working areas are clean, smooth and dry - otherwise, during use, the self-adhesive will begin to bubble over time.
- Next, the film is cut according to the measurements taken. The material is cut according to the markings with a sharp knife or scissors.
- Gradually removing paper from the inside protective covering, the film is carefully applied with the adhesive side to the working furniture part.
- Each glued fragment is carefully leveled with a plastic scraper in the direction from the center to the edges. Small bubbles are pierced with the tip of a needle, larger swollen areas are cut with a stationery knife and also rolled well.
- After pasting, all dismantled elements of the headset are returned to their places. If necessary, old fittings are replaced with new ones.
On a note! When choosing decorative photo wallpapers, keep in mind that plain pasting materials will definitely “copy” all the irregularities and bumps on the facades, but patterned ones will delicately hide them.
Decorative inserts. It often happens that after a kitchen renovation, the old set is disharmonious with the new decor. In such cases, it is advisable to update the furniture with the help of decorative inserts that echo the new interior of the room. For such a redesign, a wall-mounted ceramic tile. All work is divided into several stages:- First, dismantle the cabinet doors and thoroughly clean the work surfaces; if desired, the facades can be coated with paint of a suitable shade;
- then pieces of ceramics or solid tiles are glued to the doors using silicone sealant or cement glue;
- For neatness, the tile applique is complemented with a frame of decorative molding.
As you can see, there is no difficulty in updating kitchen units. All that remains is to choose the most suitable of the proposed options, based on the time allotted for the redesign and the capabilities of the family budget.
