Interest in DIY crafts from plastic bottles, probably will never disappear, because an incredible amount of them accumulates in the house. And besides, if you really want to do something creative, keep your children occupied during the holidays or vacation at the dacha, or do something cheap and practical, then best material than PET containers are hard to imagine.
That is why today you will find another, but very interesting selection the best, which are suitable for all the tasks mentioned above.
DIY crafts from plastic bottles photo
Of course, there is no ranking of the best, simplest works, because everyone has their own requirements both for the master class and for the finished result. For many, the result is not as important as the creative process itself, but for others, useful and practical DIY crafts from plastic bottles, photo which you can see in our article, will serve for a long time and will become excellent helpers on the farm.
So we can conditionally divide all the options into useful, decorative and mixed works, that is, those that also perform a practical function, but at the same time, say, decorate the interior (carved).
For example, such works include original pendants and lampshades for lamps, photographs of which you can see above. They are created from many top parts of the container, that is, before doing the work, you will only need to cut off the top third and leave the bottom for some other work.
Methods for decorating pendants can be different - it can be applique with fabric, ropes, laces, stones, the surface can be painted both inside and outside with paints, and can be perforated with interesting patterns.
Before you is the process of performing such DIY crafts from plastic bottles step by step, which results in a wonderful lampshade for a small lamp (of course, it should be LED lamp which does not heat up or heat up surrounding objects like an incandescent lamp, which could cause a fire). We cut off the upper part and leave the lower part to create.
Try to process the edges using a hot surface so that they are not sharp, or when gluing the cord, wrap it behind the back of the plastic. In our example, the craft is made using a technique similar to papier-mâché, when plastic surface tape or polyethylene is specially applied so that the lace does not stick to it.
The lace is well impregnated with PVA during the process, so when the glue dries, you can simply remove the bottle from the inside and only the rope frame will remain. But if this technique is too complicated for you, then leave the bottle inside, just decorate it with paint or another layer of rope.
This way you can create magnificent New Year's decorations if you leave transparent plastic inside, and treat the top and bottom with hemp, inserting a small New Year's decoration inside. in the same style can become a nice vase or interior decoration in oriental style, it all depends on your imagination and on the interior of the room where you are going to hang your new homemade decor.
There is nothing more beautiful than, but only on the condition that these flowers are made carefully, in interesting technology, using several shades of plastic, as in the master class presented to you above. And, on the contrary, there is nothing worse than terrible and clumsy flowers, for example, from a cut bottom, somehow painted with paint. There is no beauty or aesthetics in such decor, even country cottage area It is not recommended for anyone to decorate like this.
Do-it-yourself dacha crafts from plastic bottles
A real treasure trove of interesting tips always concerns decoration. do-it-yourself dachas. Crafts from plastic bottles always help us do country life a little prettier, more convenient, more practical. And for families with children these are: great way and keep the kids occupied for a while, and entertain them with ready-made garden decor.
For quite a long time, empty containers have been used as containers for seedlings or as small pots (plant pots) for flowers, herbs, and salads. All this can be organized so beautifully that it will turn out country decor, And useful system storing fresh herbs for the kitchen, cooking.
Just such examples are shown in the photo, and it works Golden Rule, that if the plants are beautiful in themselves, have lush, elegant greenery and bright flowers, then the bottles can not be decorated at all or the decorations can be minimal. On the other hand, if you are growing kitchen herbs like parsley or watercress directly on summer kitchen, then a great idea would be to decorate such pots, make decoupage or other types of applique for them.
Attracting birds to your site using feeders is great idea, both for the winter and in summer period. Many people simply don’t think about how many pests an average sparrow or starling can eat in one summer season. Moreover, the more grain and seeds the birds have at their disposal, the less attention they will pay to valuable cherries. You have options DIY garden crafts from plastic bottles- not only cute feeders, but also a drinking bowl, which is also very necessary for a comfortable stay for birds in your garden.
They may be valuable for their decorative value, but useful things created using ordinary plastic in the country are no less needed.
We present to your attention an interesting broom for outdoor cleaning, because, as any summer resident knows, in suburban conditions any broom or broom wears out at cosmic speed, especially if you need to remove fallen leaves or fruits. To get a broom, you need to assemble a structure from a long stick and a cross board, the initial blank will resemble a mop.
Using self-tapping screws, several lids are attached to the horizontal board, as shown in the photo, into which the necks can be screwed. The containers themselves are cut into strips using scissors or a cutter, first cutting off the bottom. Try not to make the strips too thin, otherwise the broom will ultimately work worse; you need all the “twigs” to retain their elasticity.
DIY children's crafts from plastic bottles
Entertainment or creation interesting decor– ideal DIY children's crafts from plastic bottles must combine both of these concepts. It would not be very pleasant if, as a result of painstaking and exciting work, you ended up with something not very beautiful. Therefore, choosing among various ideas, pay attention not only to the ease of implementation, but also to the end result, which must definitely find its place in the nursery.
For example, such a place can very easily be found by a stand for pencils and pens, made in the shape of a space monster, not at all scary, but very funny.
To work, you will need a suitable container, preferably already painted, so that you do not have to use additional paint from a spray can, as well as paper for applying the applique - face, hands, teeth, and so on. For more delicate natures, pencil cases with images of cats are suitable, which are also quite simple to make; the faces are not glued on, but carefully drawn with markers of different colors.
DIY crafts from plastic bottle caps
If the rest of the material has already gone to beautiful, then we suggest you use absolutely all the spare parts and make DIY crafts from plastic bottle caps, intended for children. It is the lids that accumulate a lot in the household, thanks to their durability, good shape and variety of colors, they can be very easily used as educational toys, items for appliques and even for didactic material, helping children's development.
The photo shows options for games that you can organize with or for children using multi-colored plastic covers. Worthy of attention is the option of turning the caps into chips for playing tic-tac-toe.
And if you insert small magnets from the back inside the lids and secure them with glue, you will be able to play not only on a specially drawn field, but also on any iron plate or refrigerator.
Animal toys created on the basis of lids will help you make a home puppet theater; with their help you can easily tell any fairy tale, from classics to stories of your own composition. As for drawings, this is a great way to teach children to count in their senior years. preschool age or learn colors in junior.
To do this, circles are depicted in the figure different color, and the baby will need to find a suitable one among all the multi-colored lids and place it on right place. The result is a simple and quite exciting game.
DIY crafts from plastic bottles for children
Fulfill DIY crafts from plastic bottles for children may not be very simple, because plastic is difficult to process, you need sharp scissors or a knife, special paints, hot glue And so on. Therefore, it will be better if you do all the work together, as a friendly team, trusting the children to complete simple steps, and leaving for myself work with cutting or processing surfaces at high temperatures.
In the photo you can see how easy it is to make small toys if you combine the bottom, stable part with the top. They can be securely connected with glue, or they can remain autonomous, looking like neat boxes. Be sure to paint it using acrylic or stained glass paints; children will like it much more. The idea of bottle nesting dolls painted in folk style is also interesting. To create them, you just need to find containers of different volumes, but of a similar shape, that could fit into each other.
This tutorial for making a lampshade using a container and lots of plastic spoons is a great option for a more complex collaboration. But the finished product will turn out so interesting and elegant that it can be used to decorate the interior, especially in a modern style.
Everyone knows that plastic takes more than 100 years to decompose. Therefore, by giving a second life to bottles, we not only create interesting accessories for the garden, home and gardens, but also help preserve the purity of nature.
Description of crafts made from plastic bottles
The variety of products made from bottles is limited only by your consciousness - there are a huge variety of them: from small flowers to such serious things as boats or fences for flower beds.
Organizers and stands for decorating your workspace
By cutting off the neck of bottles or eggplants, you can design storage areas for sewing supplies, correspondence, stationery, and cosmetics. If you connect cut bottles together with glue, you get whole sets with containers for different things.
For example, you can hang a similar design in the bathroom, for rolled towels, or in the office, at the entrance to the office - for letters. The cut off bottom of the bottle is suitable for buttons, pins, paper clips, and beads.
Any similar product can be decorated with paints, ribbons, ribbons, handles can be attached, resulting in a convenient portable “handbag” for clothespins, curlers, hairpins and other necessary accessories.
You can make lids from thick fabric in the form of beautifully designed hats - such a product will not only be functional and practical, but will also decorate any room.
Curtains made from plastic bottles
If you have accumulated a large number of identical plastic bottles, do not rush to throw them away. By cutting off the bottom of all of them and fastening them with threads, you can get an original transparent curtain that will shine favorably in the sun, protect from the wind and add zest to any veranda. This design will look like delicate flowers floating in the air.
Floating devices
Due to the lightness of the material and the voids, the bottles do not sink in water, which means that if you have a sufficient supply of material, you can construct an entire boat or raft.
However, the product must meet all reliability requirements and withstand a certain weight, so you must first make careful calculations, or better yet, watch a master class to create quality product, which will serve for a long period and will not leak, creating a danger to life.
The most in demand are crafts made from plastic bottles for the garden, vegetable garden, and local area.
Bird feeders
There are many schemes for creating such a product. If you take a large container with a handle, used for water softeners or dishwashing detergent, and cut holes in the sides, you will get a whole house for birds.
If you only have a two-liter blank, you can leave the bottom, cut off half the bottle vertically and pour the food down - on the remaining uncut bottom it will be convenient for the birds to reach food.
If you make a hole in the side of the bottle, closer to the bottom, suitable for inserting a wooden spoon, you will get a whole feed supply system. Through the hole, the grains will spill onto the spoon, which serves as a platform for the birds.
Containers for plants
You can make an entire vertical garden using plastic bottles. To do this, you need to cut out a bottle lying horizontally. rectangular hole and fill with soil. Secure the bottle with ropes on both sides and hang it.
You can plant seedlings, flowers or small shrubs in the ground and thus equip the entire wall. Don't forget to make holes in the bottom of the flowerpot for drainage.
Caps for seedlings
The cut off top of the bottle can be used to create a microclimate around just the planted plant or seeds. The convenience of this use also lies in the fact that by opening the lid and without removing the bottle itself, you can water.
Fences for flower beds
The most common way to use plastic bottles– is the creation of fencing for flower beds and vegetable gardens. This design looks neat, attracts attention and creates reliable protection from spilling and washing away the earth. For greater effect, you can tightly fill the containers with sand or earth.
To make the flower bed seem more elegant, you need to use the same bottles. There are several ways to lay them - horizontal, vertical, using whole containers or cut parts. The fence made from the lower parts of the bottle looks very gentle. Together they create flowers that would be perfect for a flower garden.
Products from caps
Lids can be used to decorate walls, flower pots, create paintings, compositions, figures, toys, decorate various surfaces. The greater the variety of colors, the more fun and brighter the product looks. A rug, coasters, sculptures and other decorations for home and garden will look original.
You can find thousands of examples and ideas reflected in photos of crafts made from plastic bottles and caps. City authorities in many cities deliberately decorate entire streets, walls and pavilions with covers in order to attract public attention and encourage rational use plastic.
conclusions
Plastic bottles are a vast field of activity for creative person. With their help, you can create real masterpieces that can optimize working space, create a functional place to store various things, give the house an original, unique design.
And most importantly, you can make crafts from plastic bottles with your own hands, simply using unnecessary material that is ready to be thrown away.
Photos of crafts made from plastic bottles
Waste disposal is one of the most acute problems facing owners summer cottages, especially since most dacha communities are, in principle, not equipped with garbage containers. Undoubtedly, paper and some household waste can be burned, and organic matter can be buried in the beds or sent directly to compost pit. But what to do with the well-known plastic bottles, which are strictly prohibited from being burned in a stove or fireplace, and burying is useless, since it will take hundreds of years for the plastic to decompose? There is only one way out - to use it for good. How plastic bottles used on the farm and will be discussed in this publication.
The use of PET containers in a summer cottage
What is a plastic container? This is, first of all, polymer material and ready-made containers. From this angle, any summer resident with a creative vision and straight hands will be able to make a lot of useful devices for the household from ordinary PET bottles, create elements of garden decor and turn empty containers into necessary things.
The main advantage plastic containers is the absence of cost. In addition, PET is light, plastic, resistant to atmospheric influences and UV radiation, and can be easily processed. A plastic bottle filled with water can withstand enormous external pressure and can act as a heat accumulator. And most importantly: in any variation, all plastic containers have a threaded section and a lid. And this is a very important thing for any master to do, which will help fasten products if such a need arises. Let's consider several options for using plastic containers in the garden.
Plastic bottles for watering the garden
The first thing you can use ready-made PET containers for is for watering. Irrigation of the site is generally a pressing issue for most summer residents, especially for those who receive water on a schedule or visit suburban area exclusively on weekends. In such a situation, useless plastic bottles will help, which will help create for the entire site without any financial costs. Let's look at three easy-to-implement options for creating a system drip irrigation based on plastic bottles of various capacities.
Simple root irrigation system
In order to water plants in doses and automatically, you will need:
- PET containers with a volume of 2 liters at the rate of one bottle - one plant.
- foam rubber (any scraps).
Pour water into each container to 4/5 of its volume. Insert a piece of foam rubber into the neck instead of a cork. Place the bottle under the plant so that the neck is in close proximity to the plant's root. As you empty, simply add water to the container. 
Drip irrigation
For this irrigation system, the size and shape of the containers does not matter. According to reviews from summer residents: the more, the better. Bottles need to have their bottoms cut off. In a cork with a hot awl or thin drill make 3-5 holes, 1-2 mm in diameter. Screw the stopper tightly onto the neck.
Dig such a container vertically (neck down) near each plant and fill it with water. Such stationary system Root irrigation requires only timely filling with water.
Hanging irrigation system
In this option, whole bottles with a capacity of 2 to 5 liters should be used. depending on the reliability of the fastening system. As when creating a drip system, make several holes in the plug with a diameter of 1 mm.
Now you need to build a support. Spears should be dug at different ends of the bed, with a jumper (slat, timber) placed on top of them. Hang the filled containers, neck down, from the top bar.
To prevent water from eroding the ground, the area where water drops fall should be mulched.
The advantages of a watering system made from plastic bottles are undeniable:
- the soil is moistened directly in the root zone of the plant;
- Irrigation is carried out with water heated by the sun;
- possibility of adding fertilizers directly to water;
- variability of application.
But the most important advantage of such watering is that it does not require human presence.
Agricultural technology using PET bottles
Any container can be used to grow greens. The main thing is to ensure timely watering and avoid stagnation of water in the lower part of the container. This can be done by creating one from plastic bottles, which will not take up much space, but will decorate your fence, balcony railing, or house wall.
Vertical garden with horizontal bottle mount
For such a structure you will need:
- PET bottles, capacity 2 -5 l;
- soft wire.
1/3 of the side of the bottle is cut out. The plug is screwed onto the neck. On the side opposite to the cutout, a mass of drainage holes is made with an awl (nail, drill).
The bottles are filled with a substrate, inside which seedlings or plant seeds are located. The improvised pot is attached to a vertical surface with soft wire. The remaining containers can be fastened one below the other or in a checkerboard pattern.
Garden made from vertically installed PET containers
This design is more complex than the previous one, but is much more efficient and is relatively autonomous. So, to create such a design you will need:
- PET bottles, volume 1-3 l.
- rubber or silicone hose ½ inch.
- line segment sewer pipe with plugs, diameter - at the discretion of the owner.
The bottles are cut approximately in half. The upper part will be used to create a vertical garden, the lower part will be used to create decorations, which will be discussed below. The top parts of the bottles are attached to each other with the neck down. A hose with holes for irrigation is laid through each vertical row. The free space is filled with earth or substrate. The upper part of the hoses is secured in the low tide using necks and caps from plastic bottles.
Water is supplied to the system from the water supply, and a section of the sewer pipe will act as a liquid storage tank. This design allows for rational use of water for drip irrigation. A vertical garden made from plastic bottles will not require any space or large financial expenses from the summer resident. You can always make a design from unnecessary containers that is best suited directly to your dacha.
In the section on agricultural crafts, only options for creating a vertical garden were considered. In fact, there are dozens more ways to use TET containers for agricultural purposes. From plastic bottles you can make light, plastic and durable containers, which are widely used as pots, containers for seedlings.
PET bottles for decorating a summer cottage
Due to their properties, plastic containers have long been successfully used by our summer residents to create garden decor. Next, let's look at several examples of the successful use of plastic bottles of various sizes in garden decoration.
Fencing beds and flower beds
The simplest design of a fence made from plastic containers is a palisade. In order to make a continuous fence of such a design, you will need a mass of bottles of the same volume and shape, filled with earth (sand, clay)
Now the small matter is small: we assemble the structure. We dig each container into the ground halfway, creating a “bottle picket fence.” After construction. You can leave it as is, or you can paint the resulting border in any color of the rainbow.
You can take a simpler route: do not dig in the elements of the palisade, but fasten them together with tape. 
The structure is simply placed on the grass, outlining the boundaries of a flower bed or bed.
garden path
For creating garden path you will need bottoms from PET bottles with a capacity of 2 liters.
- the soil is leveled.
- covered with a layer of wet sand, layer thickness 70-100 mm.
The bottoms are laid out on the future path and carefully driven into the sand until completely filled. The joints between the bottoms are filled with dry sand, and for better fixation - with sand-cement mortar.
Flowers from PET bottles
You can simply decorate your summer cottage using “plantings” of plastic flowers.
Making such a composition is extremely simple: you just need to awaken your imagination, pick up a knife, several plastic bottles and a coil of thick wire.
From the tapering part of the bottle you can create beautiful flowers, which will be used to create bouquets and decorate crafts for the home and garden.
We cut the neck lengthwise, forming six petals. We round each one with scissors. We melt the edges of the petals over an open flame to give them volume. Inner part The flower can be cut out of plastic of a different color. We glue (sew together) the structure using polymer glue or thin wire. 
Animal figurines for garden decoration
The Internet is replete with photographs of funny animals made from plastic bottles. If you decide to decorate your garden with funny little animals from PET containers, then the easiest option is funny pigs and bunnies.
The bunny is made simply:
- in the tapering part two cuts are made for the “ears”;
- The ears themselves are cut from a plastic bottle.
The structure is assembled using glue.
Pigs are made similarly, but only horizontally. The main thing is to color your creation correctly and make it recognizable. 
Household supplies made from plastic bottles
What can be useful for a domestic gardener? Broom, dustpans, pest traps, washbasins, various containers for storing small items. But simple rope by the majority of summer residents it is recognized as one of the most functional and useful materials in the household.
Rope made from PET bottles
A rope made from a plastic bottle will help out in an unforeseen situation and will become an indispensable assistant summer resident How to make a strong rope from a plastic bottle with your own hands? To create a ribbon from a PET bottle (in industrial scale) will need to be made the simplest machine, consisting of:
- blades from a stationery knife;
- 4-8 metal washers with an outer diameter of 25-30 mm and a thickness of 2 mm;
- 2 bolts with nuts, diameter 4-6 mm, length 40-50 mm;
- board (piece of plywood, chipboard), 16-25 mm thick.
We assemble the structure. We drill through holes in the board for the bolts. The washers will be put on them. The distance between the bolts should be such that there is a distance between the washers equal to half the diameter of the washer. Now install the washers on the bolts. The height of the “pyramid” from the stand will correspond to the width of the tape. Place the blade on the top washer, cover it with the washer, and secure it with nuts.
To obtain the tape, cut off the bottom of the bottle (it is useful for making garden decorations), push the edge of the bottle between the blade and the stand. 
There are many options for using rope made from plastic bottles. Durable and lightweight tape is used by domestic gardeners for tying vegetables, trees, creating supports for climbing plants, furniture weaving, handle braiding garden tools etc. A feature of such tape is shrinkage when exposed to high temperature. When heated, the PET tape assembly self-tightens!
Garden broom
According to their own operational characteristics, a broom made from plastic bottles is not inferior to store-bought counterparts. For self-creation For such a useful household product you will need:
- 7 PET bottles, volume 2 l;
- shovel handle;
- wire;
- two self-tapping screws (nails);
- awl, scissors, knife.
Cut off the necks and bottoms of six bottles. Using scissors, cut strips on each piece, not reaching the top edge of 5-6 cm. The width of the strip is 0.5 cm. Cut the bottom from the untouched container (do not touch the neck!). Next, repeat the operation similar to the previous blanks.
We assemble the structure. We place the rest of the blanks on the bottle with the neck. We compress the resulting product from the sides and fix the position of the blanks with wire. All that remains is to attach and secure the holder.
A broom made from plastic bottles is ready for use. The whole process is shown in detail in the figure.
Scoop made from plastic containers
This product will be an excellent addition to a broom made from PET containers. Everything is simple here: take a plastic container and use a marker to mark the shape of the future scoop.
Cut exactly along the line using stationery knife. Such a scoop from plastic canister will last long enough. 
The simplest washstand
To make the simplest one from a plastic bottle, you need to cut off the bottom of the container, turn it upside down, and make holes for attaching to a vertical surface.
You can wash your hands by unscrewing the cap a little so that water flows through the loose connection.
Containers for storing small items
Any dacha owner has a lot of little things in his household. One problem is that they all need to be sorted and available when needed. To store small items, you can easily make containers from plastic containers. Any one you have on hand will do:
- We make a hole in the upper side part, the size of which should allow you to easily remove objects from the container.
- We drill a hole in the lid and screw in a bolt with a diameter of 2 mm.
- Place a washer under the bolt head.
- WITH reverse side fix it with a nut.
We assemble the structure. We run the ends of a piece of wire under the washer and form a loop. Screw the lid with a loop onto the container. Now it can be easily placed on a vertical surface. As an element hanging mount container, a regular nail may protrude on the vertical surface. 
If you use plastic containers from household chemicals or machine oil, then you can assemble a whole chest of drawers for storing small things in a similar way.
Insect trap
Mosquitoes and flies are the eternal “neighbors” of humans, and it is almost impossible to get rid of them. However, their population can be reduced by using the well-known PET container as a trap material.
We cut off the tapering part of the plastic bottle, turn it over and insert it into the remaining part with the neck down. You can use sugar syrup as bait. If you add a little yeast to the composition, you can get rid of not only flies and ants, but also wild wasps.
A simple weather vane made from a PET bottle will help scare birds away from fresh crops and drive moles out of the area.
The design is simple: we cut out and bend the side sections of the container in the shape of blades. We place the resulting product on a thick wire or stick. The wind rotates the weather vane. Vibration is transmitted along the guide, which (according to experts) is very disliked by moles and feared by birds.
Bird feeders
The simplest feeder on a personal plot will attract birds, which will help the owner of a summer cottage to fight pests and insects.
They are not difficult to make: just cut out windows in the side of five-liter plastic bottles. The handle is useful for hanging the feeder on a branch. 
Greenhouses made from PET containers
, discussed above, can be easily done by any summer resident. But if you have experience in carpentry, then with the help of PET containers you can create an excellent greenhouse, without which it is impossible to grow an early harvest in our climate zone.
Such structures have many advantages, the main one being low cost. PET is much stronger polyethylene film and much cheaper than traditional polycarbonate. The construction made from plastic bottles is warm and light. It can always be repaired by simply replacing the damaged element.
There are two technologies for constructing greenhouses and gazebos:
- From plates.
- From whole elements.
Frame
Almost any material is suitable for its creation:
- The metal profile is durable and strong, but expensive.
- Wood is available and easy to process, but is short-lived.
- PVC pipes s are a great option if you already have a sufficient number of pipes and fittings that you don’t need to buy.
In any case, if you decide to make a greenhouse from plastic bottles with your own hands, then make the frame from the material that is most accessible to you.
It should be understood: metal carcass will require the creation of a capital foundation, which significantly increases the cost of the project. Support structure made of PVC pipes does not require a foundation, but requires reinforcement to withstand gusts of wind.
Filling
As building material for enclosing structures, it is better to use identical PET bottles with a capacity of 2 liters, from which the label must be removed.
For a greenhouse measuring 1.5 by 2.5, you may need from 400 to 600 PET elements.
Construction technology
The greenhouse is assembled from elements that are collected from PET bottles. The bottom of each building element (bottle) is cut off. The elements are then placed on top of each other, creating an improvised “plastic log”. For fastening of this element A cord or strip is pulled through the middle. Ready block vertically fixed to the frame. The construction process continues until the frame is completely filled: in this way the walls are built and the roof is covered.
Buildings made from plastic bottles
More serious buildings than gazebos and greenhouses can be erected from PET containers. Next we will consider the method of constructing outbuilding from plastic bottles, putting into practice the experience of Bolivian builders:
- A pit is dug and a foundation is erected.
- We are creating a replacement for bricks, instead of which PET bottles of the same volume will be used. They are filled with sand, clay or earth, which is often left after digging a pit.
- The elements are connected to each other and laid in rows. A sand-cement mortar is used to connect the rows.
- A reinforcing mesh is laid between the rows.
After installation, only the necks of the building elements remain without mortar. For additional fastening, builders recommend tying the necks together, creating a kind of plaster mesh. Now all that remains is to carefully plaster the walls, hiding the material that was used for construction.
This technology can be used for the construction of permanent buildings: fences, garages and one-story residential buildings, which, (according to the masters), turn out to be quite warm and strong.
This publication provided answers to the question of how plastic bottles can be used on the farm. Actually a new application this material is found every day, which cannot but please any normal person, because plastic is practically not recycled due to low profitability. By giving a “second life” to PET containers, we cleanse the planet of garbage that is simply buried in landfills or disposed of in incinerators, poisoning the environment.
Many homestead owners create all sorts of products from plastic bottles to decorate their place. You can create real works of art by spending a minimum of money.
Not only decorative items are made from plastic, but even furniture. All you need is a knife, an awl and a little imagination.
In this article we will look in detail at how to make crafts from plastic bottles with your own hands.
Decorating the site
Which ones homemade products you won't see on personal plots. There are flowers, animals, and trees. You can create beautiful sculptural compositions that will not only decorate the garden, but will also give you a great mood.
Let's look at a couple of instructions for beginners that will help you easily create crafts from plastic bottles. It will be a palm tree and a pig.
Bottle palm
To make a palm tree you need to create a frame. Its length should be equal to the height of the tree.
Bottles are taken same size, cut off the bottom of them and install them on top of each other. Then the leaves are cut out. They are attached to the top of the created structure. When everything is ready, the palm tree is painted green.
Funny pig made from bottles
The pig will look great anywhere in the garden. To make it you will need:
- 5 liter bottle;
- four bottle necks for making legs;
- one top part from a bottle, which is cut into two parts to make ears;
- wire for tail;
- two beads for eyes;
- glue;
- pink paint.
The parts are connected and secured with glue. The finished product needs to be painted. You can take oil or spray paint. To prevent the piglet from being blown away by the wind, you need to pour sand into it.
Besides decorative function the structure can serve as a flower bed. To do this, the top is cut off, filled with soil and flowers are planted.
Crafts made from plastic bottles for the garden can serve as flower beds, borders or paths. To make a path, bottles are inserted into the ground with their necks.
Both whole and cut plastic are used. It is important to fill the bottles with soil so that they do not become deformed when they are walked on.
Use of bottles on the farm
Bottles are used not only for decoration. These can be used to make a dustpan, washbasin, or pest trap.
Undoubtedly, everyone needs a container for storing some items. To make it, just cut off the neck.
The washbasin is also very easy to make with your own hands. The bottom of the bottle is cut off and holes are made through which the rope is threaded. The structure is suspended in Right place and pour water. To wash your face, just unscrew the cap a little.
To make a trap, you need to cut the container in half. To catch insects, some kind of bait is placed at the bottom. For example, sugar syrup with yeast is suitable for this.
Will need hot water, in which sugar and yeast will dissolve. The cooled liquid must be poured into the trap. Not only flies and wasps, but also mosquitoes will flock to this delicacy.
Note!
Even a child can make a scoop. First you need to outline its shape and then cut it out.
Can be made from plastic flower pots, greenhouses or containers for seedlings. Descriptions of such crafts made from plastic bottles can be found in large quantities on the Internet, but to create something unique, you need to show your imagination.
It is fashionable to build a self-watering device from plastic containers. To do this, cut the bottle, make holes on the sides and insert the hose into the neck. With the help of such a device, the plants will be perfectly hydrated.
For plants that do not like surface watering, make the following device. The bottom of plastic containers is not completely cut off. A trench is opened on the side of the plant where stones are placed. The bottle is buried upside down.
Then pour required quantity water for irrigation. You can place the bottles upside down, but in this case you will need to make holes in the container.
Plastic containers are also used to heat plants. To do this, bottles are filled warm water and place them around the plant.
Note!
For inspiration you can look various photos crafts from plastic bottles. You don't need to put in a lot of effort to make original decoration or a useful item for your garden that will last for many years.
Photos of crafts made from plastic bottles
Note!
The more reverently we treat our site, the more pleasure we strive there not only for work, but also for relaxation. When we decorate garden plot with your own hands, it becomes even dearer and more attractive. This can be done with the help of original figures made from the simplest and available materials, for example, from plastic bottles. Indeed, plastic is easy to cut, model, paint and retain its shape for a long time. The main thing is to show your imagination and devote some time to work. The following are possible options figurines that are appropriate for any garden plot.
Palm
Making palm trees from plastic bottles is a fun and easy process. Therefore, a large number of summer residents decorate with this exotic plant your site. If you want to join their ranks, stock up big amount plastic containers of different volumes (best from 1.5 to 2.5 liters) in brown and green shades.
Trunk
The wings consist of two parts: the upper one is assembled from small feathers cut from the bottoms; the lower one is more difficult to manufacture. First you need to cut out the middle part of the bottle, cut it into two parts, and then each of them into rectangles of the same size.
- Using scissors, the bottle is cut according to the marks made, while the neck remains in the upper part - it is necessary to secure the swan's neck in the hole.
- The neck frame is made from a hose with wire. It is pushed into the neck and given the desired shape.
- Feathers are cut from a small plastic bottle. To do this, the bottom and neck are cut off, and feathers of any desired shape are made from the remaining cylinder. It is best to cut the edges of the feathers a little in the form of a fringe, and warm the outside of each feather with a candle.
- The feathers are collected in twos and secured with wire.
- For the neck, it is best to use small bottles without a bottom, which are threaded onto the hose upside down. You will need at least 15-20 of them.
- At the place where the hose ends, you need to make 2 holes in the bottle and the hose itself. Pull the wire through the holes and secure it.
- The beak itself is best made from a large cap (usually bottles with chemicals). The cap must be cut into 2 parts so that a shape resembling the letter “M” is obtained. The finished beak should be painted.
Finally, your favorite plants should be planted in the finished swan.
Making swans from plastic bottles is a process that requires care and precision. But the result is a very cute and practical craft.
Christmas trees
Of course, almost every garden has living trees, but this does not mean that there is not a little place for a beautiful “artificial” Christmas tree. It can even be decorated during the New Year celebration at the dacha.
It is necessary to prepare in advance plastic bottles of different sizes - 2; 1.5 and 1 liter. For a Christmas tree about 1.2 meters high you will need at least 35-40 green bottles, washed and dried. To make it you will also need scissors, a candle, and a pin.
Manufacturing process:
- Cut off the bottom of each bottle and side walls cut into strips about 1.5 cm wide and round off their ends. Coniferous branches will look even more interesting if you melt them a little with a candle at the same pitch (about 2 cm).
- To build a tree trunk - for this it is best to strengthen an iron rod in the ground.
- Attach the branch to the base: simply string 2-liter bottles onto the trunk, bottom down, then 1.5-liter bottles, and 1-liter bottles on top.
- If containers of the same volume are used, then after assembling their branches can simply be trimmed so that the tree turns out to be cone-shaped. The lower branches must be straightened, and the upper ones can be left in their original position.
That's all, the Christmas tree from a plastic bottle is ready.
Lamb
In 2015, it is simply impossible not to decorate your summer cottage with the symbol of the coming year - a sheep. It will surely bring good luck to the whole family. Creating such a figure is quite a large-scale undertaking, but the result is impressive.
To work you will need:
- Plastic bottles: for legs – 4 pcs. 1.5 l and 4 pcs. 2 l each; for the body – 7 pcs. 2 l each; for the head – 3 pcs. 1 l each; for a fur coat - about 20 pieces, 2 liters each (it is important that they have figured bottoms).
- The wire is best copper.
- Aerosol paint (white and golden).
A sheep made from plastic bottles is made in the following sequence:
- The necks of two 2-liter bottles are cut off, and their bases are inserted into each other. Long but narrow ears are attached to them using wire.
- 2-liter bottles are connected as the body and neck. First, the base is made, and then other bottles are attached to it using wire or tape.
- The head is attached to the neck.
- The lower part of the legs is made from 1.5-liter bottles, and the upper part is made from 2-liter bottles. The legs are tightly fixed to the body with wire so that the sheep does not dangle on them.
- The curly bottoms from 2-liter bottles are cut off and connected to each other with wire. This creates a sheep's coat that covers the body. It is attached to the stomach.
- The easiest way to make eyes is from corks.
- The finished sheep can be painted with white spray first, and then a little gold paint is sprayed on top of it.
Such a sheep will look simply wonderful in the summer surrounded by greenery and flowers.
Penguins
A penguin craft made from a plastic bottle is a cute and funny creature that can be used to decorate both your home and garden. This figure is quite simple to make, so your children can become full-fledged assistants in this process.
To make penguins you will need:
- 2 plastic bottles of 2 liters;
- yellow, black and white paints, as well as a brush for them;
- pompon;
- braid;
- glue (it’s good if you have a hot glue gun).
Manufacturing process:
- The bottles are cut crosswise into 2 equal parts.
- The lower parts are used. They need to be inserted into each other. The halves can be fixed with glue, but even without it the parts are held together quite firmly. The bottom of one bottle functions as the head, the bottom of the other serves as the penguin's paws.
- Next you need to decorate the penguin figurine - first in the basic White color, and then use black paint to depict the characteristic penguin toe. The hat can be made in any color (in our example it is blue). To bring the penguin to life, he needs to draw eyes and a nose.
