Keys have a habit of getting lost. This small item performs a big function - it closes and opens our home. Therefore, it is better not to lose them, as they can be used by thieves. It will be convenient if the keys have their own place in the house or apartment. Such an interior item aswill provide a place where they can always be found without difficulty. Also this item interior design is an excellent gift option. Moreover, you can do it yourself. This does not require special skills. There are many options for making such an interior item aswith your own hands. They all have simple technique execution.
Key holder made of wood using a board
- To make it easier to work, you need to make a drawing of the future key holder. To do this, you first need to decide what dimensions it will have. A drawing of a wooden key holder will be a kind of design project according to which the work on its manufacture will take place. Here you can indicate what decorative elements the future will have.
- Next, you should prepare the tools and materials that will be used in the work. For this project you will need a wooden board, 6-8 keys, self-tapping screws, a drill and wire cutters.
- Unneeded keys will serve as hooks. Therefore, using wire cutters, you need to bend their lower part so that you get a hook. This procedure must be done with all elements of future hooks.
- Then you need to take wooden board and mark cutting lines on it in accordance with the dimensions that were indicated earlier in the drawing. Using a saw, make a board for the key holder of the required size.
- Next, depending on the idea, you should decorate the board. It must be said that there are a lot of design ideas. Alternatively, you can leave it as it is. Wood itself is a very warm and cozy material, so without any finishing it looks good at home.
- After the board is ready, we screw the bent keys to it using self-tapping screws. In the future they will be hooks. The distance at which these elements are attached should be chosen based on your preferences. Keys can be attachedat the same distance from each other, or you can group them.
- Next, on the back of the board we make a hole with a drill, which will be needed in order to attach the key holder to the wall. The holes should not be through, their number depends on the length of the board, usually two or three holes are enough.
When the key holder, made with your own hands from wood, is ready, you can use it for its intended purpose. One of the most simple ways making a key holder from wood. But he's not the only one.
Key holder using decoupage technique
There is another simple wayhow to make such an interior item as DIY key holder made of wood using For this option you will need the following materials.
- Wooden frame. The size of the frame depends on the size of the key holder you need. It is better to buy a frame that has special rings on back wall for wall mounting.
- For decoupage you will need a napkin with a pattern or a picture or a special decoupage card.
- A special decoupage set that includes glue, brush, primer, and varnish.
- Hooks. They can be made from anything. For example, from buttons, handles, rings, etc.
- T You will also need a knife, pencil, ruler, drill and screws.
Work on the manufacture of this piece of furniturecan be divided into two stages. First you need to do decoupage and then assemble the key holder.
How to make decoupage
In fact, decoupage is not difficult to do. To do this, you need to disassemble the frame, take its base and prime it, leave it for some time to dry. To speed up the drying process of the soil, you can use a hair dryer. Next, the decoupage pattern is glued and left for a certain time to dry. Then the drawing must be varnished and also given time to dry.
Assembling the key holder
The next stage of work on the manufacture of the key holder is its assembly. To do this, first assemble all the parts of the photo frame. Then you need to mark the places on wooden frame where the hooks will be attached. They are attached using self-tapping screws.
It should be said thathave many manufacturing options. For example, instead of decoupage, you can use embroidery. Instead of a frame, take an opening box. You can also approach the process of making a key holder with humor and focus on the hobbies or hobbies of the owner of the apartment.
The best way to keep your keys organized is to wall key holder in the corridor! In my apartment, all the keys were lying around in bags and pockets until such a wonderful thing was done. It made life a lot easier and even freed up some free time. Moreover, it is practically perfect option hand-made gift for a housewarming or wedding. I guarantee 100% that the gift will look impressive, will impress everyone and will be remembered for a long time. In general, today is a master class on how to make a key holder with your own hands, choose for it beautiful design and securely fasten the fittings.
Materials for work
1. Wooden frame 13x18 cm or larger. The key holder in the photo is 17x22 cm. The width of the baguette profile itself should be at least 2.5-3 cm.). If we take a plastic frame, then the width of the baguette should be at least 3 cm and it cannot be overloaded with keys. It’s best if the frame has its own d-ring hanger, rather than a regular photo backdrop. 
If you don’t have them, you can purchase them at a framing shop or some hobby stores.
2. A beautiful napkin or a picture with the desired image, or a ready-made decoupage krata.
3. Standard set of materials for decoupage - glue, white primer, acrylic lacquer, brush.
4. Hooks for keys (see the photo for options - half-ring screws, buttons or classic hooks) - they can be purchased at hardware stores
5. Knife, ruler, pencil, screwdriver, awl or drill, several 3.5x16 cm screws.
Subsequence
The master class consists of two stages - performing decoupage and assembling the key holder. I start with decoupage.
1. I disassemble the frame, take the backdrop out of it and apply 2 layers of white primer. I wait for it to dry or blow dry it.
2. I glue the selected fragment of the decoupage card onto the glue.
3. After drying, I coat it with varnish in 2 layers. Again I wait for it to dry, then I put it in the frame. In general, nothing complicated. Now the master class is approaching the most interesting stage with different options– attaching hooks.
4. If the frame is wooden, then select directly on it where the hooks will be screwed and mark 
We drill holes for self-tapping screws with an awl or a pencil and attach the hooks. That's all. It's worse if the frame is plastic. Then either, at your own peril and risk, we attach hooks to the sides of the baguette itself, or we make more reliable design, as in the example in the photo. To do this, we assemble a wooden subframe inside. You can either order it ready-made from a framing workshop, or assemble it yourself from timber 2-3cm wide. and attach to the frame using mounting tape.
To show how all this can be done, I made my master class using a plastic frame. How to do this is shown in detail in the photo of the reverse side. 
If you don’t want to tinker with the stretcher, then you can go the other way - at the very beginning of the work, remove the backdrop from the frame, measure with a ruler and cut out exactly the same piece of plywood or chipboard on which to decoupage, and then insert it into the frame. And attach the hooks directly to the plywood.
5. I hang it on the wall with 2 self-tapping screws, onto which I attach the d-rings of the frame. We don’t hang it on a rope or cable, it will dangle and the keys will start to fall off.
The master class is over. The key holder is ready!
This master class shows perhaps the simplest and budget method How to make a key holder with your own hands. It is simple in materials, manufacturing techniques and does not require much time.
Other ideas for making a key holder
There are plenty more different ways and ideas for making such a wonderful interior gift - from embroidery, with photos, comic and others. I will share my ideas with you.
With embroidery
One of the most comfortable and warm options– this is the manufacture of a key holder with embroidery. The photo shows three examples of such solutions, and in each of them the embroidery is framed not just in a frame, but in the form of an opening box with hooks attached inside. The inside of the box can be painted with acrylic paint or lined with velvet mat. Making a gift will take a lot of time, but the result is worth it! An easier way is to frame the embroidery and attach the hooks directly to the baguette, as in the next photo.
Another idea with embroidery for a wedding or housewarming is to make a metric on embroidery for the newlyweds or housewarmings with their names and the date of the important event. Such a gift immediately becomes personal and even more precious to its recipient. 
With photo
If you don’t have time for embroidery, then why not insert a finished photo into a frame? Then you can simply screw the hooks onto the baguette as described in our master class. The idea is simple to implement, but it will be possible to preserve the personality of the gift, especially if, instead of a simple photograph, you make a small photo collage and decorate it using the digital scrap technique.
With humor
The wall-mounted key holder can be decorated in a comic style. Here's a short master class: take the backdrop out of the finished frame, sew several objects onto it - a banknote, vintage keys or any other suitable objects. 
Attach a printed sign on the bottom that reads “in case of urgent need, break the glass!”, then put it all back into the frame under the glass.
From the thread
A rather extravagant option for fans of eco-style can be made from a thick branch. The wood will have to be thoroughly dried and thoroughly soaked with furniture varnish, after which you will have to attach the hooks and get something like this non-standard solution for interior.
From a ready-made base
The easiest option is to make a key holder from ready-made decoupage bases, which are sold in hobby stores. A plywood blank can be made in any shape, for example, in the form of a house. It will have to be decorated using decoupage technique.
From old furniture
Another mega-creative option is to make a key holder from the door of an old locker. The following video master class explains in detail how to bring it to life:
The key holder represents convenient device for storing keys.
Wall model. Wall-mounted key holders are hung on the hallway wall. Design feature this object is its fixation on wall surface and the presence of hooks or other fasteners for keys.
Pocket model. This model is a wallet and is convenient because it allows you to store all your keys in one place.
Tabletop design. This model looks like a box in which keys are stored. The design, shape and decoration of this model may vary.
Cabinet design. Externally, this model resembles a small cabinet with doors.
How to make a key holder with your own hands
A key holder is a universal item because you can store not only keys in it, but also other small things, such as glasses or mobile phones. If you plan to place more than just keys in the key holder, you will need to install additional fasteners in it.
Wooden key holder
Many people are interested in how to make a key holder out of wood? Making a wooden model of a key holder is not at all difficult; it will require scraps of plywood, acrylic-based paints, varnish and several napkins, as well as several brushes, glue and fasteners.
First, you need to cut out a rectangular or square shape and polish it. Then the workpiece is painted and varnished several times. After this, hooks for keys are attached to it.
Key holder with lock
More difficult option is a cabinet key holder with a lock. To make such an item yourself you need to have certain skills. You can also watch how to make a key holder with your own hands, master class.
Pocket key holder
A fairly simple way to make a key holder is to sew it. To do this you will need pieces of leather, thread and a DIY key holder pattern.
First, using a pattern, parts are cut out of leather, which are then sewn together. If desired, such a product can be decorated with beads or ribbons.
Frame key holder
If you have unnecessary photo frames or picture frames at home, you can use them to make an unusual key holder. For this you will need: plywood, glue and fasteners. This key holder can be decorated in different styles using a variety of materials.
Decor
When making a key holder, it is important not to forget about the decor, because it is a full-fledged element of the hallway interior. Wooden crafts usually painted with acrylics or varnished. Extensive range of paint colors acrylic base with a matte or glossy surface will allow you to create an interesting design.
Varnishes of different textures look no less impressive on wooden surfaces, creating a matte or glossy surface. A varnish with a 3D effect looks especially beautiful on wood, making the product voluminous with a convex pattern.
If desired, you can create wooden surface aging effect using textured paste.
Some people use the crackle technique to decorate the key holder, which creates the illusion of cracking. Moreover, the varieties of this technique depend on the composition that will be used in the process.
Keys are a very important item, with the help of which we enter the house and open all the doors, drawers and cabinets. But often people forget them at home and lose them; to do this, you need to arrange a storage place for them that will always be in sight, convenient, reliable and visually attractive.
Of course, you will have to tinker with the key holder, but it will save you time looking for the keys, save your nerves, and become a bright, spectacular element of the hallway interior.
Of course, nowadays you can buy ready-made option However, a handmade item will be original, stylish and suitable for you.
Before going out, each of us double-checks or takes everything we need with us. For some it may be a watch, for others mobile phone. But very often we all forget our keys. But this is a very important thing, without which we cannot close our house or start our car. Particularly stressful situations arise when you need to rush to work or an important meeting, but the keys are nowhere to be found. Therefore, to avoid such cases, it is better to purchase a key holder, which will become the keeper of your time. In this article we will look in detail at what types of key holders there are, and how to make one with your own hands.
Types of key holders
A key holder is a special device that allows you to store all your keys in plain sight. The design of this product is limited only by the personal tastes of the owner of the house. Key holders are divided into several types:
The purpose of key holders is not only to store keys. They can also be used to store glasses, phones, flash drives and other items that will always get lost somewhere. In addition to these things, you can store notes. If you set out to store not only keys, but also other items, you need to equip your device with additional fasteners. Also, do not place the key holder too close to front door. Because this way a possible attacker will have a greater chance of stealing your belongings.
Key holders are available in several options for their customers. It all depends on the purpose for which they will be purchased. For example, in office buildings usually choose metal constructions, which are locked. This is very convenient, as it maintains access restrictions and organizes a control system. Hotels usually prefer products that are specifically tailored to the interior of the room. Key holders in warehouses do not have any special design at all, but are made in the usual shape and color. The main thing is that the product performs its standard function. But if you are doing home renovations, you should approach the making of a key holder more individually, so that in the future your taste will definitely be appreciated.
A simple key holder made of wood
Although this option looks quite simple in appearance, but very effective solution where to keep the keys. You can start making the product by purchasing an ordinary rounded board. If you do not want to change the shape of the object, you can immediately begin sanding the surface with sandpaper.
If you want to keep the current color of the board, you can simply embellish it with varnish. If you don’t like the color, you can immediately start painting or covering it with fabric. To quickly find the area with clues in the future, apply black color to the outline of the shape. In this way, the key holder will stand out against the background of painted walls or wallpaper, and you will quickly find the key you need.
You need to drill as many holes as the keys will be stored. If you wish, you can decorate the key holder with additional figures made of paper or other material that can be glued.
Original key holder from a branch
If you creative person, then it’s not a problem for you to turn any little thing into a delightful decorative element. In the case of making a key holder, you will need the following:
- wooden branch;
- several metal hooks;
- drill and hammer drill;
- screws and dowels.
It is best to take a piece of wood from an oak tree. The material will be more durable. However, you can take branches from other trees. The main thing is that they can withstand the load from the tools, and that the hooks are freely screwed into the wood and hold well during subsequent use.
Stages of work:
- Sandpaper is used to remove tree bark.
- Using a drill, you need to drill as many holes as you have hooks. The diameter of the holes should be slightly smaller than the diameter of the hooks themselves. Also, you need to drill the main two hinged holes.
- If you are not satisfied with the color of the product, use stain to give the wooden key holder the shades that you like best. Excess layers will need to be removed with sandpaper.
- Varnishing will slightly improve the appearance of the product. You have a choice of glossy and matte varnish. You can choose according to your interior needs.
- The future decorative element is applied well to the wall surface in order to fix exact marks for further installation.
- Two holes are machined with a hammer drill, after which the move follows the dowels and screwing of the key holder.
- Since the caps of the screws will be visible, they can be covered with putty.
- All that's left to do is screw it in required amount hooks and calmly hang out the keys.
Key holder in the form of a frame
Perhaps you have some old photos that you can't find a place on your wall. In this case, there is no need to hang dusty paintings, but it is better to adapt their frames for more creative purposes. For example, you can inhale new life in old frames if you use them to decorate a key holder. To do this you need the following components:
- glue;
- a piece of plywood;
- hooks
If for some reason you don't like the current design, you can always change it. For example, sanding and painting. Part of the plywood is cut in proportion to the size of the frame. Also, in addition to painting, you can decorate the frame with fabric, but for this you will need to make gaps on each side. The hooks are also attached with glue. After all these steps, the key holder in the form of a picture can be hung on the wall.
Closed house-shaped key holder
This type of product is similar to a house or birdhouse that has doors. Such key holders are made of wood, plastic and textiles. But as practice shows, many prefer wooden style. For manufacturing you will need the following materials:
- a piece of plywood;
- sandpaper;
- fasteners for doors;
- screws;
- hooks;
- dye.
Stages of work:
- A sketch of the key holder is drawn.
- According to the developed pattern, parts for the house are cut out.
- The cut parts need to be sanded.
- Cover with a triple layer of varnish.
- When all the parts are ready, assembly is carried out (tightened screws should not be visible from the outside).
- Securing the doors.
- The lock is installed.
- The hooks are screwed on.
- Design occurs by painting or gluing a separate image.
Plywood key holder for the whole family
When living at home big family, a large key holder made of plywood is perfect. It is convenient because the keys of each family member will always be in front of their nose. Parents and children will not be confused or forgotten. This is due to the fact that a certain sign will be inscribed above each keychain. For example, you can give the contours of a drawing of a car, a house, or children. This kind of approach serves as key sorting.
Stages of work:
- The plywood board is carefully processed using sandpaper(corners can be rounded if desired).
- You need to plan in advance the background for the large key holder (drawing or picture).
- The image is transferred to the work area using a pencil or any other hard object.
- After drawing the contours, you can take a jigsaw and carefully cut out the required shape.
- In the area of individual figures you need to pierce holes for the key rings.
- The surface is polished again to avoid any debris from the piercing.
- The product is coated with varnish or paint, and then hung on the wall.
Magnetic key holder
The original version with a magnet looks very nice and comfortable. It is better to make such a magnetic key holder in a minimalist style. Because the lighter its weight, the better the magnet will hold hanging keys.
Materials such as plywood, cardboard or plastic are selected for manufacturing. Cut from these materials required form, and then glued with a magnet. And it turns out to be a simple but reliable key holder. Can be used as decoration various materials: ribbons, patterns, drawings. Phosphorus sprayers are considered a universal option. This way, at a late hour, even before the lights turn on, you will be able to recognize the location of the keys.
Using the decoupage technique in decorating a key holder
Using this technique allows you to display your planned design or pattern on the surface of the material being processed. This process takes place by decorating the selected image on the working surface.
What you will need for this:
- wood blank;
- napkin;
- glue;
- acrylic varnish and white paint.
Before applying the drawing, you need to treat the surface. Therefore, first it is sanded, and then a white compound is applied in two layers. When the layer of mixture has dried, select a suitable area. Apply the drawing to the desired area. Next you will have to apply glue evenly starting from the middle. Don't forget to get rid of any bubbles and excess air. After the glue has dried, decide on the overall tone of the picture. It is desirable that it matches the image itself. Any excess can be decorated with paint and a piece of washcloth, which you can press into a clothespin for convenience. And now, the decoupage technique is finished. True, it is better to apply a special varnish as a protective layer. Turn the key holder to the side of the light and where you see bald spots, apply protective varnish in two layers. Sand again to remove any possible defects. As for hooks, there is complete freedom of your taste.
The key holder can also act as an organizer. It's about about a small box in which they usually sell some household utensils or store clothespins. Also, such an item can be easily assembled from plywood. In addition to storing keys, you can store glasses or mobile device, which is also sometimes forgotten when leaving home.
Other options
Acceptable options for the key holder are: children's performance. If your children love to play with Lego construction sets, they have a great opportunity to build a home key holder. Overall, the construction process itself will be fun and educational for your child. And in case big family, absolutely everyone can take part. So, you will need the most basic large panel on which to build other elements. Multi-colored building bricks with three holes can act as keys so that you can pick up a keychain. If your construction set does not contain building elements with holes, you can make them using an awl. The whole advantage of a Lego key holder is that you can choose any color that suits you; add brick hooks in addition to additional elements decorations (you can even add some kind of winged inscription).
As mentioned earlier, sometimes you have to carry a large collection of keys in your pocket at all times. For this reason, pockets become worn and holes form. And if you also put the gadget with the keys, you will damage everything at once. That's why, alternative option there will be a pocket key holder. You can also make it yourself or purchase it in a store. But the first option will be more original and beautiful, if of course you try.
Keys are very important things that give us access to everything we need. And if you have a tendency to constantly forget them, try making your own key holder. Even if you are not one of the forgetful people, this storage item will come in handy in any case. It will save you time searching for the right thing, and will serve as a decoration element for home interior. Of course, you can buy a key holder, but by making it yourself you will achieve greater originality and superiority.
96 new photos of key holder ideas
Everyone is familiar with the problem of searching for keys before leaving the house. And it seems like we always try to put them in their usual place, but every time they disappear somewhere. How to solve this problem? There is one proven method, or rather a means or household item - a key holder. It is she who will ensure the safety of your keys.
Now, before leaving the house, you don’t have to check all your pockets or purses; you just need to look at the wall or bedside table, and the problem is solved. But another problem immediately arises: how to decide on its model. Modern market There are very many products for this purpose, so making a choice can be very difficult. The ideal solution will make a key holder with your own hands, but first, let's figure out what types these are necessary items interior and where is the best place to hang them?
In most families, it is customary to keep keys in the hallway. This means that there should be no issues with the placement of the key holder. Choose a wall or bedside table for this and secure it in the designated place.
The location of the key holder should be chosen taking into account the wishes of all family members, taking into account the capabilities of each.
If you decide to purchase a key holder in a store, then think in advance about the place where it should be located. Based on this, you will choose the dimensions of the product. It’s another matter if the key holder is made at home, then you can “try on” it on the wall or on the bedside table while working.
If you have not yet chosen a key holder model for your apartment or house, then we will help you with your choice by describing the most popular varieties and listing their advantages and disadvantages.
Desktop key holders
If your hallway has bedside tables or shelves, then you can easily place a table-type key holder on them. If purchasing a finished product turns out to be problematic, then you can take an ordinary vase or box, which will be convenient for taking keys. There are also a lot of ready-made products of this type; just visit the stores. 
Wall-mounted key holders
The simplest and most popular option for key holders are wall-mounted models. They are a rigid base on which there are several hooks. This option is often used by home craftsmen; just use your imagination and your apartment will be decorated original item interior
Such key holders can be different types and forms. Therefore, when choosing them, you need to focus on your interior design.
The key holder should not stand out in the interior; it is better if it becomes an original addition and a convenient household item.
Key holders in frames
Such key holders look very aesthetically pleasing in any apartment or house. Their background can even be a photograph, not to mention a beautiful landscape. The only thing you need to take into account is that a painting or photo can get scratched over time, so they need to be protected with something.
If instead of a picture you install a more rigid base and attach several hooks to it, then you will get an excellent key holder design. You can use another option, when hooks for keys are attached directly to the frame, and a beautiful picture is placed inside. But this requires a frame made of a more durable material; a cast or overlay bar will not withstand such pressure.
Key holder locker
This is another option for wall type housekeepers If you are not a fan of the fact that the keys are freely available to everyone, then you can try to find a more secluded place for them. A key holder in the form of a locker will do the job perfectly. If you are a supporter of handmade products, then so much the better, because there are a lot of ideas for implementation.
The cabinet can be such that it can accommodate not only keys, but also other items that are in frequent use. The cabinet itself is decorated with beautiful paintings, photographs or decorative elements. A clock may be located on the front part.
The next advantage of this option is the ability to install a secret lock on the cabinet. Of course, this is already overkill, but for some it is a way out.
House key holders
This version of the key holder is a variation of the locker model. And although the model is somewhat rustic, its roof gives it a special charm, which is why the product is very popular.
This design has several advantages. For example, compact dimensions, you will agree that a cabinet on the wall takes up quite a lot of space. But most importantly, the house key holder fits perfectly into any interior, especially since when making it at home, you can use fragments and details to decorate it that were used during the renovation of the hallway.
Key holder organizer
Organizers became popular not so long ago, but now they are making our lives easier and more planned. Oddly enough, key holders can also have this function.
All family members will be able to appreciate this model, except that the keys will be in permanent place, it can accommodate other useful items reminders, receipts or notes about upcoming purchases.
If you wish, you can also place a reminder board there, on which you can write something and then erase it. Several shelves or pockets are useful for storing other things, glasses or pens for writing. 
Decorative key holders
Decorative key holders include all models made by yourself. Agree to repeat purchased product its design is very difficult, and why, but to make something according to own project it will be much more interesting. Especially if a person has a good imagination and a sense of proportion.
Here are a few examples of wild imagination:
How to make a key holder from a photo frame
If, after reading our article, you were inspired by the idea of making a key holder with your own hands, but there was nothing suitable at hand except a photo frame, then do not despair, and feel free to get to work, this is exactly the material that you need. 
What you need to prepare for work besides a photo frame:
- several hooks;
- glue;
- 2 brushes;
- dye.
The work can be divided into several stages:
- First of all, you need to choose the color of the key holder. To do this, compare the design of your interior with one or another option. Experts recommend not making an exact reference in the design, otherwise you will have to look for another key holder in case of renovation in the hallway.
- If the frame already has some kind of coating, but it is very old or peeling, then it needs to be cleaned, sanded and re-coated with the chosen color.
- After the paint on the frame has dried, you can start hanging hooks on it.
- Now your main task is to decide where and how such a key holder will be attached. The place for it is chosen in such a way that it is convenient for all family members to use it. Therefore, the height of the frame is calculated depending on the height of the smallest in the family.
If you have a lot of knowledge in carpentry, you can use your knowledge and make a key holder yourself from leftover wood. And we will analyze a simpler version of the product, made of plywood. 
How to make a key holder from plywood
To create a key holder from this material you need to put a lot of effort. But first, draw on paper what you want to get in the end. Look for implementation ideas on the Internet or think over a diagram of plywood blanks.
There is only one way to simplify this task. In order not to have to cut out plywood blanks, you can purchase them ready-made. Then all you have to do is find a base for the key holder and skillfully distribute all the elements on it.
If you don’t like easy ways or you enjoy the work itself, then all the blanks can be made according to your own drawings and diagrams. To do this you need to prepare:
- plywood or fiberboard;
- acrylic paint;
- cloth napkins;
- paper napkins;
- tassels;
- glue;
- several hooks;
- sandpaper.
The process of making a key holder can be divided into several stages:
It is no coincidence that for these works it is used acrylic paint. It dries very quickly, which allows you to begin further work after a short period of time.
You can choose any technique for decoration. Some people like decoupage, while others prefer mosaic or painting, but in one case or another it is better to give preference to a proven option so as not to spoil the product.
We will analyze the design option using decoupage.
If this is your first work, then take as a basis small drawings that will not occupy the entire surface of the future key holder. Let these be the key fragments of the drawings that receive all the attention.
How to decoupage a key holder:
- Using your hands, cut out designs of the desired size from a napkin. Carefully separate the two lower layers, and apply the first layer with the pattern to the surface of the key holder.
- Take decoupage glue. If you don’t have it on hand, you can always replace it with regular PVA diluted with water in a 1:2 ratio. Mix these two components and, using a brush, carefully begin to apply it to the design attached to the plywood blank.
- Work begins from the central part of the fragment to eliminate wrinkles in the material.
- After drying adhesive composition the entire surface is coated with several layers of varnish. When applying the next layer, the previous one must dry.
- After the last layer has dried, you can begin the process of attaching the hooks. How they will be located will depend on your imagination.
All that remains is to attach the key holder to the wall and the work is ready. Now your keys will always be in their place. There are many more options for making key holders, you can watch one of them in the video presented:
In conclusion, we can say that the key holder is an indispensable piece of furniture in every family. To eliminate the daily search for lost items, it is better to take care of their storage location, especially since the housekeeper can effectively complement the interior of your hallway with its own appearance. There are a lot of options for this product, from banal decorated jars on the bedside table to cabinets with secret mechanisms. What you want to see in your hallway is up to you, especially since such a product can easily be made with your own hands.
