A soldering iron stand is an indispensable attribute of a soldering installation. It can be purchased at any hardware store or on the market. However, its cost is quite high. To save your own money, a stand is made for In addition to the financial issue, its functionality is considered. That is, it can be used for various needs on the farm or in a production workshop. There are quite a lot of manufacturing options. All of them differ in the complexity of the design and the amount of time spent.
General information
As mentioned earlier, a do-it-yourself soldering iron stand - convenient device, which performs many functions. First of all, she is protective surface, which prevents damage to property.
Before working with the soldering machine, it must be warmed up. In this case, the metal body heats up to high temperatures.
Soldering iron stand - what is it for?
A high-quality part is necessary for those people who do a lot of work with soldering. To make such a device as a soldering iron stand, no special skills or abilities are required. The process uses simple and available materials and tools. Finished device easy to use. Homemade stand for a soldering iron should consist of individual elements. First of all, special containers are provided for rosin, flux and a department for mixing them. Some models are equipped with a box where small parts are stored. The soldering iron stand is suitable for any device, regardless of its power and degree of heating. When making the structure, the location of these containers should be taken into account. Everything should be located so that it is convenient for the master to solder.
How to make a soldering iron stand?
It is not profitable to buy ready-made stands, since they are expensive and small. dimensions, which are not suitable for all types of devices. Therefore, many users ask this question: “How to make a soldering iron stand with your own hands?”
Before starting production, you need to prepare the materials. To do this, you should purchase the following components:
- duralumin sheets, the thickness of which is 1.5-2 mm;
- small wooden beam ok (you can use different kinds tree);
- varnish containers;
- two metal boxes.
Once all these parts have been purchased, you can begin making the stand.
So, several holes need to be made in the plate. Containers for rosin and alcohol will be attached to them. Installation of cans is easy. The containers should be easily inserted into the structure and fit snugly against each other. After these procedures, it is necessary to make a support. It is made by bending the base.
If necessary, each person can make special racks that lift the structure a certain distance. This is done for convenience during the work process. Preparatory work ends with processing the duralumin sheet with a file or sandpaper. Corners should not have sharp ends.
Assembly of the structure
So, let's start assembling the soldering iron stand. The prepared support must be secured to a wooden beam.
This can be done using screws. Next, the prepared small containers are attached. They are attached to the base using special glue or epoxy resin. Many craftsmen also install a small container between the racks. You can store small parts in it that you will need during your work.
From wire
A stand for a soldering iron made of wire has gained great popularity among many craftsmen and amateurs. It can be made from ordinary tin can. In the process of assembling the installation, simple parts are used:
- tin;
- large diameter pencil;
- washers and bolts;
- wire.
First you need to make a spring. The first thing you need to do is purchase wire from the store. Some people remove it from other indoor fixtures. It must be thick enough so that when heated to high temperatures the soldering iron did not destroy it. In addition, only high-strength material will be used. The finished product should spring back.
Cut the required length of wire and carefully align it. To create a spring, use a large diameter pencil. Holding the wire, carefully wind it onto the pencil. The result should be a tight spiral. At its end there is a special fastening in the form of an eyelet. For these purposes, pliers are used.
The next step is to prepare the tin can. A small hole is drilled in its bottom.
This can be done using a nail or drill. Next, the stand for the soldering iron is assembled. The prepared spring is inserted into the jar and the structure is secured using a bolt and nut. To ensure a more durable fastening, washers are used. This method is quite simple. Anyone can make a soldering iron stand. Its manufacture does not require much time or special tools.
Soldering iron stand with power regulator
More and more people prefer to use this type stands. Its essence lies in the fact that it is equipped special device, which independently adjusts the degree of heating of the soldering iron. Therefore, the device does not overheat and does not fail. The stand differs from other types in that it requires an electrical connection to function. To make a version with a power regulator, you need to take the following elements:
- copper wire;
- a small piece of plywood;
- transformer;
- LEDs;
- fastening parts;
- resistor;
- wires;
- socket for connecting to the network.
After everything necessary details were purchased, proceed directly to assembling the stand.
First, select the size of the installation. Based on this information, a base is cut out of a sheet of plywood. Next, the transformer and other parts will be attached to it.
Fuse stand
Manufacturing this option does not take much time, effort, and also does not require large financial investments. The base is a wooden beam onto which the fuse jaws are attached. They can be various sizes. It all depends on the personal preferences of the masters.
Benefits of stands
First of all, the main advantage is mobility. Homemade stands are used by people who quite often do soldering, working within several workshops. Such a design is not always at hand. However, it is easy to make. In addition, there is no need to carry rosin and tin separately in different containers, since now they are stored in special jars on a stand. That's why homemade installations They are popular not only among amateurs, but also among professionals.
How to make a simple model?
It happens that you urgently need to use a soldering iron, but there is no stand for it.
In this case, there is no time to look for the necessary parts and run around the shops. Therefore, it is better to make a simple one, but also reliable design. There are many options, but there is the fastest one. The stand can be made in a few minutes. The base will be the usual wooden block, and stands - screws or nails. They are driven crosswise into the beam. This creates a stand on which the soldering iron fits well and holds tightly.
Conclusion
When soldering elements, there must be a stand for the device. This auxiliary equipment is expensive, so it is better to make it yourself. This process will not take much time, effort, and will also save money.
Greetings, Samodelkins!
To do this we will need the following tools and materials:
1. Laminate scraps left over after renovation
2. A small piece of 16mm chipboard
3. Clamp for polypropylene pipes
4. Electric jigsaw
5. Wood glue
6. Spray paint. The author used black, but then, in some way, he regretted that he chose such a gloomy color. dark color. Therefore, it is advisable to choose a more cheerful color.
7. Putty
8. Sandpaper
9. USB lamp from a fix-price store
10. 2 alligator clips
11. A pair of small bolts and nuts for them
12. Copper wire
The author begins work on a homemade product. First you need to decide what you are going to store in your homemade product. To determine the dimensions of the future product, he compactly folds what is in in the near future will be stored in homemade organizer.
At this stage, he also notes the approximate dimensions of the future product.
Now, but more precisely, he makes a drawing of the workpiece. When making a drawing, it is also necessary to take into account the thickness of the materials used.
Now the author proceeds directly to making the organizer. First, he cuts the laminate and chipboard to size. Super precision is not needed here, but still try to make the cut as close to 90 degrees as possible. This is what the box should look like.
Next, you need to mark what size the stands for the soldering iron holder should be. The recesses should naturally be higher than the walls of the box, and the stands themselves should be of such length that, when lying down, they fit comfortably in the box, and in one layer. Now you need to cut out a recess for both metal parts. The author does it this way:
After some time, he realizes that this could have been done much easier with a wood crown, and only then cut in half. Well, as they say, a good thought comes to someone else or to ourselves, but late.
This is what ended up happening. All you have to do is tighten a couple of screws and you're done.
Now let's start assembling the box itself. Starts from the bottom. Makes small recesses in advance for the screw heads. Then, in the gluing areas, use sandpaper to remove the entire glossy layer of the laminate. Next is gluing. The author takes a special glue for wood products and glues wide side walls, made of chipboard. When gluing, it is advisable to use clamps. After the glue has dried, it is necessary to secure the entire structure from below with self-tapping screws. Next, check the perpendicularity of the walls. You need to measure the angle between the walls. It should be straight - 90°.
Everything is fine, let's move on. Now this design It has rigidity, so it can be glued and screwed onto screws at the same time. This is what happened.
The author made the lid of the box using a tongue-and-groove connection. It's long and tedious. The author adjusted everything by hand so that it fits tightly enough into one whole. Next he glues all the details. This will be quite enough, since practically no loads are expected on this part of the organizer.
Then you will need sandpaper. It is necessary to use it to sand down all possible irregularities and apply wood putty. Putty is mainly needed to cover the chips on chipboard ends, well, and hide all sorts of jambs that formed during production. After the putty has hardened, you need to clean it. On help will come still the same sandpaper.
The next stage is painting.
It is necessary to paint the box to give it a marketable appearance.
Well, the paint has completely dried and here the author would like to add one point. It was necessary to choose a more cheerful color so that loved ones would not have the desire to take the box away and bury, for example, a hamster in it. Anyway.
Now you can carefully remove the tape from the stand where the hot part of the soldering iron will be. We don't need the smell of burnt paint. If there are any left sticky marks from the tape, you can try to remove them. Or leave it as is. After turning on the soldering iron, the remaining adhesive from the tape on the stand should burn out.
And on the part where the handle will be we put on the original rubber band from the fastener for polypropylene water pipe so that the soldering iron does not slide on the stand.
The mounting of the soldering iron stand itself will be very simple. Nuts are glued into the racks and the whole thing is tightened with bolts with heads to the wall of the box. Here's what we ended up with:
Everything is very simple and practical. If you wish, you can drill several more of the same holes, and if you have more than one soldering iron, then this design feature will be very useful. It will be possible to rearrange the rack under different sizes soldering iron Now the author decided to make a couple of clips in the side wall of the box. They will be used as a third hand for soldering. To make such a design you will need this miracle of Chinese engineering from a fix-price store.
In the store it is positioned as a USB lamp for illuminating a laptop keyboard. It can also be used in conjunction with a power bank, or as a night light. It is better suited as the latter, since, to be honest, its light is so-so, but its flexible leg will be useful to us. You will also need a couple of small screws with mortise nuts.
The main working tool of a radio amateur or equipment installer is electric soldering iron, which cannot be used without a stand that is suitable in size and reliable in operation.
In amateur radio practice, a homemade stand for a soldering iron is most often used, the design of which is selected depending on the specific conditions of use.
As a rule, it consists of a base and two support posts, on which the tip and handle-holder of the heated soldering device are placed.
Make your own high-quality stand used for soldering various products and metal parts can be done using any available means that meet the following requirements:
- reliability and stability of the foundation;
- fire resistance of the material of the support posts;
- availability of space for containers with rosin and solder.
The simplicity of the device in question does not mean at all that you can use low-quality parts to assemble it and treat it as something not particularly important.
On the contrary, to make a soldering iron stand you will need durable and reliable materials, suitable for working in conditions of high temperatures, as well as accurate calculation of the dimensions of the base with holders and containers placed on it.
Jars of rosin and solder attached to the base must be placed in an order corresponding to the sequence of operations performed during soldering and not interfere with the work with the soldering iron.
Some craftsmen place soldering irons along with a power regulator on such stands, which significantly complicates the design of the entire device as a whole.
Unlike small-sized factory samples, self-made stands must have dimensions sufficient to accommodate all the elements listed above.
Sometimes such devices are equipped with a special holder for a soldering iron (the so-called “third” hand), which allows you to fix the workpieces or parts being processed. One of the simplest product options is a crocodile-type holder.
Simple version
To assemble a simple, convenient stand with a minimum of parts yourself, you may need the following consumables:
- a wooden flat piece made of beech or oak measuring approximately 25 by 12 cm, necessary for making the base of the soldering iron stand;
- duralumin plates no more than 1.5 mm thick;
- miniature metal containers (brass cups from an old-style telephone call can be used to make them).
After all this material has been prepared, you can proceed to assembling the stand for the soldering iron itself, starting with preparing the seats for containers with rosin and solder.
In the case of using brass cups from a ringing device (bell), they are simply screwed to a wooden platform in a pre-designated location.
After this, triangular or oval shaped supporting elements are made from a duralumin plate (the distance between them is selected according to the length of the soldering iron).
The supports formed in this way are attached to the base of the stand using self-tapping screws or large screws.
If necessary, the height of the supports for placing a soldering iron can be increased by lengthening them due to short metal racks with threaded ends.
All prepared parts should be carefully processed with a file, and then their surfaces should be cleaned with sandpaper, which will smooth out sharp edges and remove dangerous burrs.
Third hand holder
To solder individual parts or products, it is very convenient to fix them in a certain position, freeing up the hand in which the soldering iron should be located. For these purposes it is used special device, which is sometimes called a “third” hand soldering iron stand.
To assemble it you will need the materials and tools shown in the photo above. The list of required parts includes alligator clips, holders decorative candles and any spring of suitable size.
The basis for such a design can be a Chinese-made product, equipped with a magnifying glass and containing all the necessary elements.
When assembling such a stand, first a spiral holder for a soldering iron is attached at some distance from the center of the base, after which candle holders are inserted into pre-drilled niches.
Before installing them, you need to pay attention to the thickness of the walls of the cups, selected for reasons of optimal thermal conductivity. And only after this will it be possible to insert them into already prepared niches, having first coated the bottoms with glue, and then align the edges flush with the plane of the wooden base.
After installing the containers for rosin and solder, it will be possible to fix the “crocodiles” by crimping them around the spiral. The height of their location is chosen in such a way that working with the soldering iron and the part does not cause any difficulties.
For ease of soldering, the spiral design may provide for vertical adjustment of the clamps.
If necessary, a magnifying glass (magnifying glass) can be additionally included in the assembled soldering iron stand. However, experimental operation of such devices has shown that the simultaneous installation of auxiliary clamps and a magnifying glass on the stand creates certain inconveniences in working with them.
The choice of options for making a stand with your own hands is quite varied, and depends on the materials that the master has at his disposal.
If you don’t want to do it yourself, you can always buy a ready-made stand at a soldering accessories store.
Initially I wanted to make something simple, namely a holder for a soldering iron with a temperature regulator, since the soldering iron overheated, but once I started, I couldn’t stop. All necessary equipment I did it gradually, and therefore new and new ideas arose each time.
So, we will need:
Material:
Chipboard board;
Bolts of different diameters;
Screws, self-tapping screws;
Wing nut (10 pcs.);
Crocodiles (3 pcs.);
Door hinge (1 piece);
Unnecessary flashlight;
3 motors (2 from the printer, 1 weaker one from the machine);
4 LEDs (3.5 volts);
5 switches;
Collet;
Small sharpening attachment (from the engraver kit);
Helium paste (adapter for nozzle);
Wires;
Soldering iron;
3 corrugated tubes (from a gas lighter);
Cigarette case;
Tin reel;
Socket;
Door knob;
4 meters of cable;
2 power supplies (from a 5-volt phone charger and a 9-volt router);
Self-adhesive film, edge;
Black paint;
Tool:
Soldering iron;
Glue gun;
Chisel;
Metal scissors.
So, let's begin
We take a chipboard board, mark it and cut it into an L-shape, dimensions are included.
At a specially selected location, mark and cut out holes for push-button switches (4 pcs.).
In order to conveniently place our devices, and they could be adjusted, double L-shaped levers, cut from tin, were made for each individually.
The cheapest soldering iron stand was purchased.
And now we will refine it!
It was decided to make 2 crocodile holders; to do this, we drill 2 holes on the sides, take a steel wire, and push it through the bottom.
Next, we bring the ends to the top, align them flush with each other, bend them so that it looks solid? We take 2 corrugated tubes taken from a gas lighter, put them on a wire, and then attach a crocodile on each side, and also drill a hole in the saucer in order to firmly screw it to the surface of the board, the result is.
We make the third vertical crocodile, bending it in this way.
It attaches to the bottom of the stand.
It was decided to make a mini drill, as well as a sharpener for small parts. To do this, 2 unnecessary motors were taken from the printer.
A sharpening attachment was attached to the motor using an adapter made from a gel pen. The motor itself was attached to the found metal mold, in this way so that it can stand vertically.
In order to be able to work at night, we make lighting from an unnecessary flashlight, in my case this type.
We remove the excess and leave only the part with the LED.
In order for the lantern to move up and down, an adapter (lid) was taken and drilled through hole, a long bolt is inserted, the holders are cut out, and everything is clamped with a wing nut in this way.
Sometimes you have to work in hot weather, so I wanted to add such a nice little thing as a fan. We take the most common motor and make a housing for it. The broken charger from Nokia was the optimal size. We cut off the fork, take out the core and cut out a place for the motor.
The wires were soldered, when assembled it looks like this.
In order to be able to solder small elements, we take a magnifying glass, remove the excess and make a backlight using 4 LEDs of 5 volts each, and attach it with a glue gun.
We cut out two plates, bend them in the shape of a slingshot, drill them, and thread a long bolt, this is what it all looks like.
We attach it to the body of our mini drill in this way.
In order for the stand to be used anywhere, we add 4 meters of cable and a regular door handle, for winding it up.
Drill 2 holes for the fork.
 |
|
We drill 4 holes for fastening and make partitions.
We put everything we need.
We make the main holder for the soldering iron, handle and tip.
We cut out 2 plates, bend them, attach them to door hinge, and from below to the board itself.
The door hinge is needed so that when unwinding the cable we can move the soldering iron to the side and it will not interfere with us.
|
|
|
Since the soldering iron overheated greatly, and it was almost impossible to solder, it was decided to make a temperature controller; after looking at the diagrams, etc., I decided that it would be easier to buy an inexpensive dimmer (light controller) of this type.
Having disassembled it and cut out a place for the board in the board, I brought out 2 wires to the bottom, left one half of the case, and drilled a hole in the middle for the regulator wheel.
 |
|
Attached to the board with 2 self-tapping screws.
I'll post the connection diagram below.
In order to be able to work in one place, and also for convenience, we install an outlet, which makes it possible to connect glue gun, charging your phone, etc. things.
We make a stand like this, where you can put a jar of flux, or something else. Cut from an old watch case.
When all the fixtures are ready and painted black, apply self-adhesive film to the surface of the board. Was chosen light color, since on such a surface all the details are clearly visible, side faces edged.
Modern soldering irons are highly efficient popular tools used for tinning and soldering elements, as well as melting solder and then applying it to areas of parts soldered to each other.
A do-it-yourself soldering iron stand is quite easy to make and makes using the tool safe and convenient.
All soldering irons produced today by domestic and foreign manufacturers differ in their power ratings and their design features, which affects the choice of type, size and shape of the stand.
Rod-type models have ceramic and spiral heaters.
The second option is more practical and durable, but has a fairly long warm-up time. A ceramic soldering iron heats up much faster, but requires careful operation and the utmost care, so a high-quality stand can prevent unwanted shocks or failure of the device.
The material for a traditional stand is also selected taking into account the power indicators of the soldering tool:
- 3-10 W models are used in desoldering the smallest microcircuits;
- devices 20-40 W belong to the category of household and amateur radio;
- devices 60-100 W are most often used in automotive services and are involved in unsoldering thick cables;
- soldering irons 100-250 W are used in sealing dishes; they easily solder radiators and other large-sized metal.
The most powerful soldering irons are bulky tools that require especially reliable and strong stands. A convenient and multifunctional stand makes work safe, and the presence of a voltage regulator prevents overheating of the soldering iron in long work with the device.
When connected to the mains, the device quickly warms up to 250-300 °C, so it is placed on a special stand or inserted into it, and then placed on the edge of the working surface.
How to make a stand for a soldering iron with your own hands?
Today retail outlets a huge number of different devices are sold, including simple holders and entire complexes called soldering stations. Availability of a minimum number of tools and materials, as well as small quantity effort and time allows you to independently make a convenient and practical durable stand for a soldering iron of almost any type.
Materials
As the required minimum materials for self-made stands can be considered:
- stable and non-flammable base with legs, made of any materials that are poorly conductive of heat and safe to use;
- supports for laying or inserting a soldering iron;
- a special container filled with rosin (flux).
Simple homemade stand
The most popular auxiliary “options” of the design can be represented by a reliable platform for tinning, a container for solder and a device for cleaning the tip.
When choosing elements that are supposed to be used in making a soldering iron stand with your own hands, preference should be given only to high-strength, non-toxic and durable materials.
Tool
The set of tools may vary depending on design features the basics and materials used in working on the design - a hacksaw for wood and metal, wire cutters, screwdrivers, construction knife, marking and measuring tools.
Simple stand option
The most budget-friendly, simple and widespread, the so-called amateur option, is a design with a metal wire mount for the device. In this case, the conical spring of the holder is fixed on a wooden or ceramic base. Often the wire is replaced with thin metal clothes hangers.
Homemade mobile soldering iron structures are often made from sheet metal, obtained from a broken computer power supply. This original base is intended primarily for use by people who regularly perform soldering work outside the home. Distinctive feature This model is quite easy to use and functional, as well as its compact size and the ability to transport the base in a small bag or a simple pocket.
Work surface stand
Any most simple coasters can become more convenient if the design is supplemented with some auxiliary elements, represented by a metal sponge for cleaning the tip, a holder for soldering, containers for tin and rosin.
Stand with energy saving circuit
The main disadvantage of a soldering iron is the duration of the initial heating and the need to keep the device turned on even when performing periodic soldering, which has an extremely negative effect on electrical energy consumption. Among other things, overheating of the device is accompanied by oxidation of the tip and solder.
Thanks to the use of a simple circuit that is installed on the base, it is possible to save energy.
For self-production you need to prepare:
- a diode with a maximum forward current corresponding to the power of the device;
- microswitch having the required current on the contacts;
- electrical socket;
- electric cord with standard plug;
- mains voltage indicator.
The socket and microswitch are traditionally located in the side of the base, not far from the soldering iron.
Manufacturing technology:
- installing a diode in the body of the socket;
- connecting a diode to a socket without taking into account polarity;
- connecting the power cord to another socket and free diode input;
- parallel connection of normally closed contacts of a microswitch to a diode;
- insulation of the diode and all connections;
- installation of a microswitch on a movable bracket.
The device, installed on the stand, presses the lever part of the bracket with its weight, which is accompanied by switching the microswitch and opening its contacts. In this case, the power is reduced by half, and the voltage is monitored by an indicator.
As a rule, the operation of a stand with an electrical energy saving circuit requires control of turning off the soldering iron after completion of work.
Connecting a soldering iron via a bridge
This version of the circuit helps stabilize the operation electrical appliance under conditions of voltage drops and surges in the electrical network. In this case, the diode is replaced by a diode bridge with a smoothing electrolytic capacitor at the output.
Materials for production are presented:
- diodes with the required rated direct current values - 4 pieces;
- electrolytic capacitor of 40.0 uF and 350 V or more - 1 piece;
- microswitches or a group of contacts normally closed from the relay - 2 pieces;
- power cord with plug;
- voltage indicator.
Regulator with triac and diode bridge
DIY manufacturing technology:
- cover the contacts with a dielectric cover;
- connect bridge diodes to one disconnected pair of contacts;
- Connect a capacitor to the second pair of contacts.
The operating power position is characterized by voltage supply through the bridge and typical smoothing using a capacitor.
Shape, dimensions and design features models depend on the elements used, and the manufacture of a movable bracket that switches contacts is carried out using a relay, carefully removing the windings and core.
Soldering iron stand with power regulator
A distinctive feature of the design is the presence of a power regulator built into it, which allows you to regulate the heating temperature of the soldering iron.
Materials and tools for manufacturing are presented:
- radio components;
- chipboard sheet;
- high-strength plastic;
- tin elements;
- fasteners and clamps;
- metal sponge;
- rubber parts;
- adhesive composition;
- drill and cutter;
- soldering iron;
- construction hairdryer.
DIY technology for making a soldering iron stand with a power regulator:
- assembling the power control board in accordance with the above diagram;
- manufacturing a plastic blank for the body part of the board using a heat gun;
- production of a tin box with soldered corners;
- making a tin box for a metal brush for cleaning the tip;
- assembly of a stop for an electrical device;
- soldering a bolt to a clamp as a “third hand”;
- production of a stand base from a chipboard sheet;
- cutout on the base using a recess cutter;
- placing rosin melted using a hair dryer in a recess;
- fixation metal box, stand and clamp;
- screwing the board and fixing the case.
On final stage manufacturing, a box for an iron brush is screwed on, and anti-slip rubber feet are also fixed with glue on back side a ready-made stand.
To make the operation of the finished stand as comfortable and safe as possible, it is necessary to mark the adjustment of power indicators on the device board.
Conclusion
At self-assembly multifunctional stand, you must remember that the operation of soldering irons that differ in power indicators is accompanied by a display different meanings on an indicator assembled according to the circuit for measuring the current consumed by the device. This feature is not always convenient to use, so experts recommend replacing the indicator element in the circuit with a voltmeter, and preferring an assembly like KTs405a to a traditional diode bridge.
