Doors accumulate the same dust and dirt as walls. This means you can clean and wash them in the same way. But only a few doors have a surface as smooth as the walls.
To remove surface dirt, wipe the door with a dry towel. Then wrap the broom in an old soft towel and go over the corners and crevices where dust accumulates. Clean intricate embossed jewelry with a soft toothbrush.
Wash the door once it is free of dust and dirt. If it is wood and stained, use wood oil soap mixed with water as directed on the package. A couple of home remedies will help you clean a painted door.
Mix 4 l warm water, 1/2 cup ammonia, 1/4 cup clear vinegar and 1/4 cup washing soda.
Dilute 1/2 cup of ammonia and 1 teaspoon of mild dishwashing liquid in 4 liters of warm water.
Dampen a natural sponge with the solution until it becomes completely soft. Then squeeze it out better. Wash the door from bottom to top, thereby avoiding streak marks. Rub small areas in a circular motion. Rinse the sponge more often and better so as not to smear the dirt. If the solution remains clean, there is no need to wash the door with water.
There is no need to remove door accessories to clean them. Use plastic wrap instead of a screwdriver. Secure it with electrical tape around the part you are going to clean. If it's metal (like a handle), use a metal cleaner like Buggy Metal Cleaner, which will clean any metal, including brass. If the accessories are glass or ceramic, plastic film not required. Wipe them with a rag soaked in alcohol, which will not harm your already clean door.
And a little more doors...
Each type of door requires an individual approach to care and products intended only for certain types of doors, since the use of products that are not intended for care, for example, for doors with a varnish coating, can damage the varnish itself and their surface.
Interior wooden doors without a varnish coating they require the most delicate care - at the beginning of cleaning such a door, you first need to remove dust, and only then carry out the cleaning itself. Door cleaning products can be either specialized or so-called “ folk remedies" - solution tap water with alcohol, approximately in the ratio of water - 90%, alcohol - 10%. After cleaning with this solution, you need to remove any remaining liquid with a dry cloth. For wooden doors with varnish, after this cleaning procedure, you need to apply polish or other special product. The application of such products is necessary because varnish coating may develop cracks, and the polishing agent fills them, preventing the wood from drying out and forming even larger cracks.
From the history of doors.
The ancestors of the first wooden doors for buildings are doors made of sycamore or German maple, used in Ancient Egypt(3000 BC) and Ancient Persia (1000 BC). In Italy the most ancient arched door is, perhaps, an Etruscan door in Volterra (4th century BC). Behind long years existence, the door acquired a number of fundamental characteristics, such as an architrave (from Greek archi - elder, main and Latin trabs - beam), doorjamb, threshold, door panel, door - book, etc. The architrave and jamb were transformed into today's door frame, the threshold remained practically unchanged, and the ancient doors on pins - "turntables" were modified into technologically advanced doors on hinges. However, a “pin, rod”, as a structural element that provides movement door leaf, remained unchanged.
As for the material that served as raw material for doors, iron and bronze gradually gave up their positions to wood. As far as the works of outstanding sculptors and architects that have survived to this day can be judged, wooden doors were already diverse in design and decoration. Walnut and oak, famous for their durability, were and remain the most used wood materials, while more valuable species wood: maple, rosewood, pear, teak, ash, cherry and others were temporary favorites in different centuries.
How to clean doors from grease stains?
In general, this process is not that complicated. Correcting the situation is quite simple. To delete greasy spots from the surface of any door leaf you will need:
- acetone;
- potato tuber;
- table vinegar;
- clay;
- alcohol;
- ammonia;
- baking soda;
- water;
- napkins and sponges;
- some free time.
First, determine which category the dirty door belongs to. The range offered today is wide, but the following types are considered the most popular:
- metal;
- wooden;
- laminated;
- glass.
Metal door
A type of door from which grease stains can be removed especially easily. Acetone, familiar to everyone and sold in building materials stores, will quickly eliminate the problem. Alternative option- White Spirit. It is no less effective and has the added benefit of being virtually odorless.
Wooden door
In the case of a polished wooden door, it will help to return it to its original condition. raw potatoes. So,
- divide the fruit in half;
- rub greasy fingerprints thoroughly with one of the parts;
- wait a while and remove any remaining marks with a wet cloth.
Instead of potatoes, you can use pharmaceutical talc, which has proven itself in the fight against such contaminants. Make sure it works as follows:
- sprinkle the powder onto a damp sponge;
- rub the desired areas;
- then go over them with a clean and dry cloth.
Wooden door leaves, painted and unpainted, are cleaned differently. In the first case, proceed like this:
- soak a cotton pad or napkin generously with vinegar;
- clean grease stains on doors until all moisture is absorbed;
- ensure complete dryness with a clean cloth.
Important! If oily traces appeared on the surface relatively recently, replace the essence with warmed water and soap.
A combination of ordinary clay and vinegar will save an unpainted canvas from shiny marks. For this:
By the way, did you know that many housewives use various surfaces? Try it!
Such specimens are covered on top with a special, especially durable film. And when washing away greasy stains, this will only benefit you. The instructions are simple:
- dilute alcohol with water in a ratio of 1:9;
- Place a napkin soaked in the solution against the stained part for a maximum of 5 minutes;
- wipe dry.
Caring for laminated doors completely eliminates the use of abrasive and chemically active cleaning agents such as acids and alkalis.
Laminated door
Things that last the longest are things that are taken care of. Don’t be lazy to rid your doors of dust, take care of hand hygiene and, to avoid unpleasant situations, enjoy food only in designated areas. And if greasy stains appear on the doors, do not put off cleaning and follow the tips given.
We hope that our advice will help you and you will become a regular reader of the site "Clean.ru", and we will share with you as much as possible useful ways cleaning dirt and stains.
General, periodic or unscheduled cleaning is part of our everyday life, and there is no escape from it. Most of the measures provided for in such cases are carried out according to long-established, traditional technologies. However, not everyone knows how to effectively remove grease stains from laminated doors. In fact, if you look at it in detail, all the techniques implemented at home are quite simple.
When starting to remove stains, you need to take into account that doors made of PVC, chipboard or plywood are more “gentle” in terms of care. As a rule, they are the ones that are laminated, and this protective and decorative layer is easily damaged by abrasives, especially if it is a film on paper based. Therefore, when washing such interior doors, extreme attention and accuracy is required.
What to cook:
- Sponge or soft napkins. One will not be enough to remove grease stains.
- Warm water.
- Cleaning agents - soda, alcohol, essence (lemon or vinegar), household solvents, laundry soap. They are used depending on the origin of the stains, including fatty ones. After all, the latter may not be the only ones on the canvas, box, or trim. Therefore, when deciding what to wash wooden doors with (plastic or otherwise), this must be taken into account; It’s unlikely that anyone will be happy with the prospect of putting them in order in several “passes.”
Operating procedure
Determination of the nature and extent of pollution
The door may not necessarily be stained with drops of grease. Traces on it, dirty spots appear even with repeated touching, it seems clean hands. But the secretions of the sweat glands still remain. As a rule, in the place where the handle is located. Gradually, dust adheres to this area, and the lamination begins to darken. Such a preliminary examination will allow you to determine exactly what and how to remove grease stains from doors covered with laminate.
Preparation of the solution
Depending on the degree of contamination, one of the following options is selected:
- soapy;
- vinegar (10%);
- lemon essence (same concentration).
Surface preparation
To simplify the process of removing fat, the base must be freed from adhering dust and dirt. The housewife decides how to wash the door herself, focusing on the material of the door and the type of lamination. As a rule, the same soap solution is sufficient. But here you need to know a sense of proportion. It’s one thing if the canvas is made of plastic - in relation to the liquid (if it is not aggressive) this material inert. But if you have to wash a wooden door, you should be careful; the canvas is immediately “dried”, that is, wiped dry with a soft cloth.
In some cases, before washing the sash or trim, you have to get rid of adhering lumps of dirt, which is often found on entrance structures. When deciding how to clean the door in this area, you should also consider the type of lamination. If it is glued on a wooden panel decorative paper, covered on top with a thin film, then no scrapers, knives, etc. can be used - such coated ones are easily damaged. You should first soften the dirt by moistening it with a wet cloth, and then wash the area clean with soapy water or soda solution (200 ml/3 tsp).
Fat removal
- To do this you will need a weakly concentrated solution (1 to 10) citric acid or vinegar. Alternatively, alcohol. The product is carefully applied with a moistened cloth to the stain. Recommended exposure is about 2.5 - 3 minutes (with an average degree of contamination).
- Rinse off the solution along with fat fragments with clean warm water.
- Wiping the door with a dry cloth.
- It is not recommended to keep the solution for more than 5 minutes. Any of the drugs used is to some extent aggressive, and can damage it with prolonged contact with the protective layer. The same fully applies to the question of how to care for doors with lamination. In this regard, they are much “gentler” than their metal or glass counterparts.
- When caring for wooden doors and removing various stains from them, it is advisable to dry the treated area with a hairdryer. This is safer and faster than wiping the surface with a cloth.
If you choose the right method for removing grease stains, then there will be no traces left on the laminated door. It is advisable to clarify this issue before purchasing it. Furniture showroom managers are well versed in this and will definitely give some sensible advice.
Made from natural wood, constantly needs cleaning, updating, and restoration if necessary. Save appearance The product is not difficult if you constantly clean and wash the doors with special products for wooden materials. Modern market offers a large number of cleaning products. However, it is important to know how such substances are used.
You should treat the product carefully, having first studied the composition of the substance. Such products should not contain acids, solvents, or other destructive components. They destroy the coating. There are more primitive ways to clean wooden doors using conventional homemade products.
Care options
Over time, various scratches and cracks appear on the wooden surface, even with careful care. Caring for wooden doors does not take much time, but extends the life of the product. There are a variety of options for caring for such items:
- Cleaning with polishing agents for such surfaces.
- Using special wax or wax pencils in the process of updating or restoring a door.
- Cleaning the item with a regular solution to remove dirt or grease.
- Possibility of surfaces.
Polishing products are intended for caring for the wooden surface of doors or furniture. Similar option It will clean the doors from grease stains and remove dirt. If you need to cover up cracks or scratches, it is recommended to use wax or varnish.
An excellent option for removing scratches or splinters is wood wax pencils. They are recommended for surface renovation with a certain sequence of work:
- It is recommended to carefully clean the damaged area with fine-grained sandpaper.
- Next, wax is rubbed into this area, which is rubbed on top with a piece of soft fabric. This option will allow you to quickly remove scratches from a wooden door.
It is advisable to rub more wax into deep areas. The stores offer a wide range of pencils, which are selected according to the shade of the object. It is important that the main color does not differ from the finishing color. Wax pencil for wood is an ideal tool for masking imperfections in the surface of products.
When choosing polishing products, it is important to review the composition and application characteristics. As a rule, standard cleaning agents are not effective, but can sometimes damage the base of objects, especially varnish.
Folk remedy for cleaning wooden surfaces consists of using a solution of water and alcohol. The ratio of components should be 9:1, which allows you to quickly and professionally clean the wooden surface.
Wash wooden doors in the same way, which will thoroughly clean the surface of dust and dirt. The technology for using an alcohol-water solution has the following sequence:
- clean the surface with a regular rag soaked in the prepared solution;
- After this, remove any remaining moisture from the door using a dry cloth.
This cleaning option is a common procedure for caring for doors and does not repair uneven surfaces or scratches. It is necessary to wash not only the surface, but also clean the locks and hinges from time to time to ensure that the product is fully functioning.
It is important to know! The use of abrasive agents or powders to wash or clean wood surfaces can accelerate the aging process of the substrate.
Let's consider a similar surface renewal process with similar steps such as cleaning, sanding, and repairing damaged areas. Step-by-step instruction execution of work:
- First of all, it is recommended to wash wooden doors after repair and remove the coating in the area where scratches or chips appear.
- Next, the process of restoring the wooden surface is implemented, followed by grouting and puttying.
- To prepare the surface for varnishing or wax pencil you need to sand the damaged area.
- Using a pencil, the shade of the object is evened out so that the patch is not noticeable.
- Lastly, paints and varnishes are applied.
To renew the surface, it is important to choose sealing and cleaning products that correspond to the size and nature of the defects. Most often, buyers choose wax pencils, which allow you to quickly and effectively remove all inaccuracies and small damage without extra effort. They are made of durable enamel that is painted in a certain shade. Some experts advise using nitro varnish in spray form, which dries in a few minutes.
Varnishing a wooden surface
For wooden surfaces, it is recommended to use varnish rather than paint. Coating is not difficult, the main thing is to consistently apply the substance to the base, first repairing all scratches. Such a substance allows you to preserve the original appearance of the material and does not hide the natural pattern of various pieces of furniture.
In stores, it is possible to choose the appropriate shade of varnish, which will make the surface darker or lighter. varnished in this way is the only solution that has a number of advantages:
- versatility in the use of funds;
- creating a durable film that protects the surface from damage;
- wide selection of paints and varnishes;
- simplicity repair work on tree renewal;
- the presence of properties that reduce the likelihood of exposure to the external environment.
How to increase service life?
It is recommended to constantly clean a wooden door and inspect the hinges, the functionality of the lock, and so on. Experts advise inspecting simple or folding wooden doors twice a year, which includes performing the following actions:
- loops, lubricated with the necessary means and adjusted as necessary.
- Additionally, it is recommended to remove the lock and handle and clean it from accumulated dirt and dust.
- Doors should be covered protective equipment, for example, polishes, varnishes and so on.
- If the fittings are outdated or broken, it is important to replace the glass, handle and other parts.
- If the doors are made according to a certain mechanism design, then it is important to clean the folding parts twice a year.
To avoid various problems with the operation of items, it is advised to adhere to the rules. For example, the temperature in the rooms should be standard; it is also important to control the humidity level, which should not be more than 60 percent. Clean the surface from dirt and grease in a timely manner. It is also not recommended to use heaters and other devices. During repairs, the products are taken to another room or covered with film.
Wooden doors lend themselves various types damage, however, it is important to monitor the integrity of the structure. The surface of the door can be restored with wax pencils or varnishes.
Professionals advise how to clean wooden doors yourself, and what products are best to use for this. Modern doors They are often embossed and decorated with decorative slats and mosaic patterns.
Door handles take on an untidy appearance within a short time after cleaning and also require separate cleaning agents. Therefore, it is better to learn the rules for washing doors from various materials.
Basic rules for caring for doors
In order for the doors to serve as long as possible, owners should:
- take into account that the tree does not like humidity above 65% and temperatures above 24 degrees;
- treats doors with care to prevent damage;
- various stains are removed from doors immediately;
- if the door leaf is not of high quality, you should coat it with two layers of varnish - then the problem is how to wash it MDF doors will not be.
- During repair work, the doors are covered with polyethylene.
Choosing cleaning products for doors
For cleaning doors use:
- neutral detergents;
- The glass in the doors is wiped with water ammonia and wiped dry;
- metal inserts are washed with soapy water;
- door handles disinfected.
TO common funds for washing include "Mr. Muscle" and a spray with a spray. They are used to wipe doors and remove greasy stains from glass.
Cleaning doors
Wood cannot be wiped with a wet cloth, so you need to wring it out before washing. To remove stains on doors use:
- Dishwashing liquid is used for the door leaf;
- grease stains can be removed by wiping them with a cut potato;
- Cover the stains with a mixture of clay and vinegar in equal proportions, leave for 30 minutes and wash off with water;
- To add shine to glossy glass, add to water Apple vinegar;
- First the glass is washed, and then the door;
- Smooth glass is washed with a soft cloth, textured glass with a brush, and for frosted glass, starch is added to the water.
A particular problem is how to wash white doors, because dirt is more noticeable on them. The main thing is to apply cleaning composition to soften the dirt, and after a while, wash off the dirt with water and wipe the doors dry.
Elimination of surface defects
When damage to the door cannot be avoided, they are eliminated with a wax pencil matching the color of the door. If the damage is deeper, you need to use wood putty, after which the doors are painted or varnished.
All compounds are washed off clean water, after which the doors are wiped dry. When washing, do not use steel wool or abrasives to avoid damaging the surface of the doors.
