How to remove the hinge cover of a plastic door. How to remove a plastic door from its hinges. Door installation process

Plastic doors are attractive and affordable elements that have a wide range of uses today. PVC entrance doors can be seen in government institutions, private offices, production workshops. In private construction, plastic doors are used as balconies, loggia doors, garage doors, summer kitchen. Often, in order to carry out work on repairing plastic sheets, replacing glass or hinges, plastic door has to be dismantled. How to remove the canvas without professional help - find below.

Plastic doors are attached to two door hinges, located on one side of the door frame pillar. Door hinges for PVC structures differ in the method of attachment to overhead and applied ones. For balcony doors, overhead hinges are used, which allow the door to be adjusted. For pendulum entrance and interior plastic doors, applied hinges are used, which look like a door closer.

To easily and quickly remove a PVC door, you need to know the structure of door hinges.

A set of hinges for plastic doors consists of a leaf part with a metal insert, an aluminum frame part with pins for fastening, a spacer made of a metal alloy for connecting the frame and sash, and fasteners.

The hinge components allow the door to be adjusted without removing it.

So, in order to adjust the door horizontally, you need to use a hinge template (metal tab), and vertically - with adjusting screws, which are located under the decorative caps.

In order to choose a new loop to replace the old one, you must consider:

Door size and weight;
The design of the door frame and leaves;
Profile wall thickness;
Method of opening the door.

The hinge can be replaced only after removing the plastic sheet. To replace a door hinge you will need pliers or a side cutter, a punch and a hammer.

Dismantling a plastic entrance door: how to remove it from its hinges

Removing the plastic entrance door from its hinges may be necessary if one of the hinges has been damaged or the door has become faulty and needs repair. In addition, the door will have to be removed in order to lubricate the hinges with oil.

Experts in metal-plastic structures advise lubricating door hinges at least once a year: this allows you to extend the life of the structure.

Withdrawal procedure entrance PVC doors with hinges have certain nuances, because the front door, unlike interior and balcony doors, is equipped with reinforced hinges and anti-burglary mechanisms. Due to the heavy weight of the structure, working alone can be quite difficult. In addition, the entrance metal-plastic door is usually hung on three hinges.

In order to dismantle the entrance metal-plastic door you must:

Disassemble all three boxes: remove protective decorative overlays, prying them off with a screwdriver.
Press the top hinge pin with a hammer and pull it out of the groove by the lower end using pliers.
Do the same with the middle loop.
Raise the doors up 50 mm and tilt the door towards you. If the canvas is heavy, then this can be done by placing a lever under the door.
Rotate the doors to activate the bottom swing arm and remove the door from the bottom hinge.

After dismantling, you can lubricate or change the hinges, or carry out repair work on the blade. After completing the repair work, the main thing is to install the door level so that the door opens and closes freely. You can adjust the position of the door after it is installed.

Instructions: how to remove a plastic balcony door from its hinges

The design of balcony doors is not very different from the design of conventional ones interior doors: a balcony door also consists of a door frame and a leaf on hinges. You can remove the balcony door from its hinges on your own: thanks to small sizes and the weight of the door, work can be carried out without outside help. In addition, the balcony door is often installed with only two hinges, which allows the work to be done quickly.

To remove from hinges balcony PVC door needed:

Remove the protective caps from the hinges.
Close the door, but do not block it.
Press the top hinge pin so that its end is pressed out of the groove.
Grab the pin from the bottom of the loop and use pliers to pull it out of the groove.
Tilt the door towards you and gently pull the handle towards the ceiling so that the bottom pin is released.
Remove the door from its hinges.

After this, you can carry out further renovation work. The balcony door is installed in the reverse order: first, the leaf is put on the lower hinge, and then it is leaned against the plane of the door frame. Next, the upper loop is assembled: an axial cylinder is inserted into the loop mechanism from below. At the final stage, protective caps are put on the loops.

How to disassemble a plastic door

Repair of a plastic door, in some cases, can be carried out without removing the door from the hinges. So, for example, without removing the door you can replace the glass in the frame, plastic sash in the canvas. The door consists of a frame, double-glazed windows and a PVC panel. The elements are held in the frame by glazing beads.

In order to disassemble a plastic door you need:

Prepare the tool. A flathead screwdriver is suitable for the job. sharp knife for a plane.
Insert a screwdriver into the groove between the bead and the door frame and separate the bead.
Remove the top and bottom beads, then the side ones.

After this, glass or plastic panel you can easily remove them and replace them with a new element. The glazing beads are inserted back without additional fasteners.

How to remove a plastic door from its hinges (video)

Plastic doors, today, can be seen on almost any construction site: they can serve as entrance, balcony, and interior doors. In order to replace the plastic door or hinges, if necessary, it must be dismantled. You can remove doors from their hinges without professional help. This is done quite simply. The main thing is to strictly follow the instructions, and you will be able to dismantle quickly and efficiently!

During renovations in an apartment, office, or private home, there is often a need to dismantle complex structures such as doors and door frame. Proper execution This task will not only preserve the structure for reuse or repair, but also not damage the wall, which has a weak spot near the doorway. How to remove a wooden or metal-plastic balcony door will be discussed in this article.

Dismantling is a matter of a few minutes. However, this step must be justified. Removing the balcony door only makes sense if:

the door is partially damaged and does not provide airtightness of the room;
the canvas is curved, the glass unit is damaged or completely broken;
the lock does not ensure a tight fit of the canvas to the box;
door curtains have exhausted their durability and should be replaced;
The premises are being renovated and replacement is necessary to comply with the design.

The reasons may be different, but it is worth remembering the generally accepted rules that will help you complete this stage with minimal losses:

Replacing the plastic balcony door done in winter only as a last resort.
If it is implied complete replacement plastic or wooden balcony door, then you should take care in advance new box and begin installing the new canvas immediately after dismantling the old one.
For dismantling, the participation of at least two people is necessary, where the first performs the removal manipulations, and the second holds the canvas and insures the first.

Necessary tool for the job

For quick dismantling you need to have the right tool at hand. For wooden and PVC panels, this set will be different due to the difference in the method of fastening and the material of manufacture.

Removal tool wooden structure frames:

Screwdrivers with Phillips and straight slots.
A powerful pry bar or a large, curved crowbar.
Ax with a wide blade (flat blade).
Nice hammer.
Fine-toothed hacksaw (preferably an axle saw).

This basic kit will allow you to quickly remove the door and disassemble the frame without damaging the wall. Certainly, experienced craftsmen They can add a screwdriver, a drill with a hammer, or a crowbar for dismantling platbands to the list, but we offer a set that will definitely be found in every man’s workshop.

Plastic box removal tool:

Powerful pliers or wire cutters.
A pry bar, crowbar or strong board to create leverage.
A set of hex screwdrivers of the appropriate size.
Powerful Phillips screwdriver.
A thin drift or blunt nail.
Sharp knife, chisel.

The set of tools differs noticeably due to the characteristics of the material, different weights canvas, features of dismantling standard curtains, a complex mechanism for a balcony door.

Removing the plastic door

When all necessary tools found, it’s time to study the algorithm of how to remove the unnecessary plastic door to the balcony.

The order of work is as follows:

It is necessary to completely open the mechanisms of the lower and upper hinges. To do this, use a knife to pry plastic plugs, which close the mechanism. After this you need to open the door a little. Insert a drift into the upper hinge and knock out the axial cylinder with a light tap. If it does not fall out freely, you need to grab it from below with pliers, turning it and pulling it down. In this case, the drift should be pulled out of the groove. At this moment, the assistant master must hold the canvas in a strictly vertical position so that it does not tilt towards the ground and does not begin to “tear out” the fasteners from the fragile frame.

After this, the door is opened 90° and lifted up. The bottom pin cannot be pulled down - it is built into the fastener and cannot be disassembled. This operation It should be done by two people, using a lever: the crowbar or board must be wrapped in thick cloth (so as not to damage the lower edge of the canvas). The lever must be rested against the lower plane and the floor. A little force will be enough to rip the door off the bottom hinge. Having slightly tilted it towards himself, the assistant master should hold the door after it jumps off the axial cylinder of the lower hinge. Now the plastic balcony door has been dismantled. Can be repaired or replaced.

If there is a problem in the frame itself under the plastic door, dismantle it:

You should start by dismantling the decorative trims. This is done using a screwdriver, spatula or knife. The casing simply comes off from the box itself, like a construction piece.
After this, the slope panels (inner box) are removed. The process is similar to the previous point.
Then you should remove all the foam. A spatula or knife with a thin blade works well for this.
The next step is to unscrew the box fastenings from the wall. To do this you need a screwdriver or screwdriver.
Now you can begin dismantling the frame. A pry bar is inserted into the gap between the box and the wall, and the frame is broken into the room.
The last step is to clean the wall of any residue polyurethane foam, fastenings.

Removing a wooden door

The process of dismantling a wooden structure is different from dismantling plastic. The sequence of work execution has fewer steps, but takes much more time.

You need to open the balcony door, insert a crowbar between the floor and the lower plane. Usually the linen is removed from the curtains without special labor. Problems begin when the door hinges are rusty and cannot be easily removed from the hinges. In this case, there are two options:

Lubricate the hinges with liquid oil. By opening and closing the door, you can achieve almost complete saturation of the curtains and then try to remove them. If this method does not help, you need to spray a solvent onto the rusted curtain. Powerful chemicals in a few minutes the rust will eat away and the door will give in.
If the reason is a curved curtain, there is no way to remove the door from its hinges; you must remove it along with the hinges. In this case, it is necessary to break the paint that covers the fastening of the curtain to the box, and try to unscrew the screws with a screwdriver. At this time, a partner must hold the door so that it does not tear out of the frame while removing the last screws. This step is justified by the fact that damaged curtains will still have to be replaced - even if you manage to remove the door, you will not be able to put it back on the damaged curtains.

Dismantling a wooden box is carried out in several steps:

Using an ax, the external platbands are removed. The ax blade is inserted under the casing and driven with a hammer onto maximum depth. Using the ax handle as a lever, you can quickly tear the casing away from the box.

There are two ways to remove a wooden box from the opening:

If it is possible to remove the fastening nails with which the box is nailed from the inside to the wall, then it is necessary to remove all the fasteners, then remove the entire box. This can be done by tapping with a hammer or an ax around the perimeter of the structure. To avoid damaging the tree, you can use a board that will distribute kinetic energy over large area, will prevent damage to the wood.
Otherwise, the box is cut at the corners with a hacksaw, and the sides are removed separately.

After dismantling, the walls must be cleaned of dirt and remnants of fasteners.

Door installation process

This stage depends on whether the box has been dismantled. If it is necessary to replace only the blade, the installation process repeats the dismantling algorithm in reverse order. The main thing is not to damage the new canvas with the box, therefore all work is performed by two masters, where the second number insures the master and firmly holds the canvas from accidental falling or damage.

Easier to change wooden door- it is simply put on the hinges and then adjusted to the frame using rubber gaskets (provided that the dimensions of the opening are taken into account when assembling the new canvas.

Plastic means more difficult process, where it is important to lift the pins in time and achieve maximum fastener strength.

It is more difficult to install the box. Installation must begin with processing the walls: drilling new holes for fasteners (using old ones is not recommended). PVC and wooden box is inserted in a similar way: in an already assembled state, it is mounted in the opening and secured by installation. For wooden frame It is better to use powerful self-tapping screws with dowels (quick installation). Less commonly used are special nails for concrete or liquid adhesive compositions. PVC panels are mounted on a mounting frame - thin metal plates.

Plastic doors are gradually replacing other types of door models and have a complex design mechanism. The plastic sheet is connected to the frame using special hinges, which are one of the main parts of the door block. During operation of a plastic door, some problems may arise in the form of mechanical damage or force majeure. In this case, repairs are required, for which you need to know how to remove a plastic door, and the removal process differs from the procedure with a wooden door. Before you begin this work, it is advisable to read the instructions.

The plastic door block differs slightly from ordinary ones. The main elements are a box and a canvas fixed with special hinges. Usually three to four fittings are used, this makes it possible to distribute the entire load evenly.

The hinge fittings are placed at the same distance from each other, the upper and lower products are fixed in the direction of the box. Fastening elements are hidden under special linings with plastic caps, which makes door block holistic and aesthetic. Blocks often include a glass insert, which requires extreme care when dismantling and installing the panel.

The main reasons for dismantling a plastic structure

The main reasons for removing the canvas may be:

malfunctions; to troubleshoot problems when the fastening moves to the side or breaks, adjustment is required; for this it is necessary to remove it from the fastening hardware;
replacing a damaged part or product when it is necessary to replace the hinges or the blade itself;
renovation of the premises to save appearance the door block must be removed and packed in protective material;
increasing the size of the doorway, the canvas is removed to expand the opening, for example, to transport large items.

Removing a plastic door can be done when replacing it, in case of renovations in the room, or if it is necessary to repair its structure.

Regardless of the reason for removing the product, the work requires extreme caution, both during dismantling and during reinstallation.

Main types of hinge fittings

Plastic door blocks are attached to the frame various types loops, which have their own technical characteristics.

The main types of fittings include:

Card. This fitting differs from standard conventional fasteners only in its external design. When removing, it is enough to unscrew the screws, which are clearly visible and distinguishable.
Mortise. They are rarely found on door blocks made of plastic; when dismantling, the fasteners are completely unscrewed; simply pulling them off the pin is not possible.
Screw-in. One of the more common options on a balcony door, the structure of the fastener is similar to the card type.
Invisible fastener. An aesthetically attractive door block, labor-intensive to remove; all fasteners are hidden in a special box, so complete dismantling of the door leaf will be required.

The type of hinges is quite easy to install using visual inspection and then begin dismantling.

Balcony structure made of plastic

A plastic structure with double-glazed windows is in most cases used as a balcony. Loops for them are mainly used in two types: card and screw-in. To repair or replace the door, if necessary, you will need tools such as: screwdrivers of all types, a set of hexagons, pliers, a punch, a pry bar.

When removing the balcony door from the mounting hardware, it should be opened slightly, i.e. door handle position parallel to the floor surface. The caps must be removed from the hinges decorative look. After this, you need to insert a puncher into the upper loop fittings and carefully, without special effort knock out the axial element, otherwise the hinge mechanism may be damaged. When the edge of the connecting pin appears, pick it up with pliers and carefully remove it from the groove.

The canvas must be opened approximately ninety degrees, otherwise when removing the lower loop, it may bend. The door leaf tilts in its direction, and it is advisable to have an assistant, since the balcony door is double glazing It is heavy and if dropped, the lower mounting mechanism may be damaged. Canvas in open form rises upward by about 5 cm; for this, a lever is inserted into the locations of the lower sashes, rests against the floor surface and is moved to the ceiling. As a result of this, the fabric jumps off the pin where the lower loop is located. There are no fastenings in this place, there is only a rotation rod, which will allow you to easily remove the door.

In a similar way, plastic interior doors are removed from their hinges. But before starting dismantling, you should examine the type of hinges and then determine your actions.

Upon completion of dismantling the door to the balcony, you can begin to repair its body, fittings or replace the double-glazed window. Having completed the repair work, you can begin installation in its original place. To return the canvas to the opening, you must perform all the steps in reverse order.

If the blade clings, then after installation it is necessary to carry out adjustment using special bolts. At the end of the installation and adjustment work, decorative caps are put on and the functioning of the door is checked.

A plastic door is an attractive design that has a lot positive features. That is why it can increasingly be found as an entrance, balcony and interior design in houses. It is also distinguished by its practicality of use and low cost.

However, like any others, it needs quality care and timely repairs and sometimes it needs to be removed from its hinges. This may be needed for various reasons- to disassemble, clean, decorate or check functionality.

Traditional fasteners

Attention! To understand the principle of removing a structure, you should understand what fasteners are on it. They may differ in appearance and design. Accordingly, the removal principle is also somewhat different.

Peculiarities

They are distinguished enough complex design. It is important to understand the principle of the device, which will allow you to remove it without any problems. The device is represented by the following components:

Metal tab. This component is often called the door part.
The frame part, which has built-in pins necessary for fastening.
Distance sleeve. It is located between the metal tab and the frame part.

Such components are able to ensure proper fit of the frame, while maintaining smooth opening and closing. If necessary, you can adjust the hinges in the required direction, ensuring more correct functioning of the lock or lock.

Possible options products for plastic structures, which differ in their color

The adjustment can be made in two ways. One of them is horizontal. It is done using a loop template. The second adjustment method is vertical. It involves the use of adjusting screws, which are located under the decorative caps of the products.

From time to time, fasteners need lubrication. This will extend the service life, ensure reliability and strength. Based on the type of fastening, they are divided into overhead and applied options. Among the most popular are overhead options. They are also considered the easiest to remove. It should be understood that initially you should pay Special attention for overhead models. This will allow you to purchase high-quality construction, which will be easy to remove and disassemble. To do this, you need to learn a little more about overhead models. They are used to install balcony doors.

The quality of the functionality of the doors themselves depends on the quality of the installed products. Very often, distortions occur, for which the hinges are primarily to blame, since due to the low level of production they have extremely weak characteristics and simply cannot withstand the weight.

Modern overhead hinges are classified according to GOST; they all differ in installation options, which affect the weight door leaf and the direction in which it opens. Various areas of application are possible. therefore, you need to pay attention to the characteristics that the manufacturer usually indicates when selling the product.

There are a number of points to pay attention to, including the following:

Sash and frame profile design.
The presence or absence of an amplifier.
Profile wall thickness.
The weight of the sashes and their dimensions.
Opening principle.

All these points should be taken into account so that the structure lasts a long time and there is no need to remove the canvas. Most often, the hinges are quite strong and reliable, due to the fact that they are made of Teflon. If the loop suddenly fails, there will be no difficulties in replacing it. For them, side cutters, pliers, a hammer, and a hammer are useful. Most often, removal of the structure is necessary if low-quality fittings were initially installed, they are faulty, or the door is broken.

Operating principle of standard balcony design

When is dismantling required?

Dismantling may be planned or the problem may arise suddenly. Very often this is a breakdown. Certain fasteners, the door itself may fail, or it may require high-quality adjustment. In most cases, this will require removing the structure from its hinges.

One more common cause becomes the replacement of individual parts or installation of a new door. In these cases, unhinging becomes a necessity. Also among the reasons are renovation work in the house, during which the canvas significantly interferes, or the process of expanding the opening.

Removing the metal-plastic sheet yourself

How is the work done correctly?

Disassembly involves removing the canvas. You should adhere to the work algorithm in order to achieve a favorable outcome of the dismantling process. There are three main stages in the process of removing the canvas.

The first step is to remove the linings from the canvas. To do this, open the hinges by removing the caps that perform a protective function. The principle comes down to the fact that the door is closed, leaving the handle raised up. After this, carefully pry the cover with a screwdriver to bend the plastic.

Removing the main pin using pliers

The next step is the need for analysis. To loosen the mechanism, press the hinges at the top, helping to lower the pin down. The axle can be completely removed using pliers. The final stage It becomes directly the removal of the canvas. To do this, you need to grab it and tilt it towards you. Only after this is it carefully lifted so that the loops are separated. It should be borne in mind that the structure has an impressive weight, so you may have to work together.

After this, the need arises for subsequent installation of the structure in place. To do this, the canvas is inserted into the opening, putting it on the hinges, while focusing on the bottom one. It is put on the support pin and the position of the elements is adjusted. After this, the door is finally inserted into the opening, the axial cylinders are mounted, tightened and the decorative elements are put in their places. Finally, you should check the functioning of the canvas and fittings. If there are any shortcomings, the operation of the door leaf should be adjusted.

Different kinds metal-plastic doors

Attention! At first glance, it may seem that the removal process is unusually simple. However, it is not recommended to deviate from the instructions. It was developed by experienced professionals who know how to act so as not to damage the components and ensure the possibility of its subsequent normal installation in place.

Now you know how to do it yourself. This work does not require any special skills. Removal is a simple and accessible process for every person, and calling specialists is not required. The canvas itself will be removed extremely simply and without problems, especially if its installation was carried out correctly. If necessary, you can always pay attention to the video, which illustrates this process in detail. This will even get rid of possible difficulties and will guarantee the ease of the process itself.

In contact with

Comments

Unfortunately, there are no comments or reviews yet, but you can leave your...

New articles

New comments

S.A.

Grade

Svetlana

Grade

Sergey

Grade

Sergey

Grade

Alexei

Grade

Latest reviews

adminadmin

It would seem that what is so difficult about dismantling a PVC balcony sheet? In practice, it turns out that without instructions on how to remove a plastic balcony door from its hinges, it is not easy to do the work yourself, especially for people without experience.

The seemingly simple design is quite heavy, so it will require a competent algorithm of actions during the dismantling process. To remove it from its hinges carefully, quickly and without the risk of damage, you need to know exactly which hinges you will have to work with.

Hinge options for PVC doors - components

The design of a balcony door, as well as a double-glazed window, is based on the use of fastenings - hinges. The main material for making loops is Teflon. Teflon products cope with the load, despite the impressive weight of the door leaf, guarantee smooth operation of the structure, and help create a tight connection with the door frame.

Each loop consists of several important elements:

metal part No. 1 (mounted to the door);
metal part No. 2 (mounted on the frame using built-in pins);
spacer bushing (redistributes the load from the door to the frame).

The dismantling process has its own nuances, but the main rule is careful, coordinated movements without haste, according to the instructions.

How to dismantle a plastic balcony door leaf with your own hands: a guide

There is nothing difficult about removing a plastic balcony door while studying a video on a thematic channel. Additional assistance will be provided step-by-step instruction. By following the recommendations, you can solve the dismantling problem without having special skills, which will save you on paying for the services of specialists.

How to remove a PVC balcony door with your own hands:

The door must be closed without closing the handle all the way.
On each side of the structure, it is necessary to remove the caps masking the hinge mechanisms using a screwdriver.
Dismantling begins from the top hinge. To do this, press on the upper part - the pin protruding beyond the loop.
Using pliers, pick up the cylinder at the bottom of the loop, and then carefully remove it through the bottom of the mechanism.
The door is tilted towards itself, easily pulled by the handle, taking into account the weight of the structure, preventing it from falling.
The blade is lifted up a few centimeters, releasing the cylinder in the lower support of the mechanism. The structure is ready for complete dismantling, since the hinges no longer secure it.

In the same way, you can install the product in place.

Installation of a PVC door - reverse order

After completion of repairs and correctional work, the plastic door also needs to be carefully put in place. To do this you will need:

Insert the canvas into the opening so that it rests on the hinges at the top, avoiding distortions.
The lower loop is also placed on the support pin with all elements adjusted.
The axial cylinders of the hinges are mounted in place, after which the pins are manipulated in the reverse order of dismantling with pressure from the bottom up until a characteristic click is heard and they protrude outward by half a centimeter.
You can adjust the position of the door by tightening the hinges.

At the final stage, the decorative masking mechanisms of the hinges - the caps - are returned to their place.

What to do with rusted hinges?

Prolonged use of the door can lead to the formation of rust on the hinge mechanisms. In such cases, it is important to remove the fabric from the hinges without sudden movements.

Do not use a hammer or other tools to try to break the rust layer on the fastening elements. Such manipulations will only worsen the situation.

The solution will be a special aerosol that can remove plaque within 6-12 hours after application. As soon as the mechanisms are cleaned, they begin to work with them according to the dismantling instructions.

When can you do without dismantling?

Problems with the functioning of the PVC door leaf do not always need to be solved by dismantling. Some problems can be resolved on site using simple tools- hex wrench and screwdriver.

To understand that the protective caps on the hinge mechanisms are not the source of problems, you need to start the repair by removing them (use a screwdriver). Often these details negatively affect the operation of the door. Simply treating the caps with lubricant can solve the problem of squeaking, tight closing and opening.

In case of distortion, it is necessary to correct the position of the blade directly in the holes of the hinges hidden under the caps, using a wrench and a screwdriver.

As a preventative measure, the structure needs to be lubricated from time to time and its position adjusted, to prevent the problems from worsening when dismantling the balcony door becomes the only solution.