It's nice to see when a person has made all and other household items with his own hands. To simplify the process of cutting metal or sawing out elements from wood, they build homemade machines and devices for a home workshop. Such a solution saves not only time for the manufacture of products, but also money for the purchase of finished products. We will consider several practical and interesting options below.
DIY pipe bending machine
Read in the article
How to use homemade machines and tools for your home workshop
The use of homemade machines and devices for a home workshop is aimed at solving several problems:
- Simplification of the metal processing process. In the course of creating household items, a metal cutter or press is often required.
- Improvement in wood processing. Even to build a small shed or make a wooden one, others are needed.
Buying a ready-made tool is quite expensive, so the use of home-made machines and accessories for the garage is becoming more and more relevant every day. Among the most common home tool options are:
- joiner's workbench;
- device for quick sharpening of knives;
- device for sharpening metal drills;
- drilling machines;
- Press;
- cutting disc machines.
Here are some photos of do-it-yourself tools and devices from "homemade products":
1 of 4
Practical DIY tool shelves
Before creating the devices and with your own hands, determine the storage location for all the devices, so that later you do not search throughout the workshop or where what lies. It is not difficult to make a shelf for tools with your own hands, the main thing is to decide on its dimensions and material of manufacture.
The easiest way to make shelves is to assemble them from wood. Do not forget about the need to cover the finished structure with a protective varnish or to prevent wood from rotting and swelling.
You can create a combined version of a metal support and wooden shelves. Here are detailed instructions for creating such a homemade model:
| Image | Sequencing |
 | Assembling the frame. To do this, prepare two side frames, consisting of 4 corners. Connect the elements with. Then, pull 2 frames together using 4 corners. |
 | When the frame is completely assembled, proceed to making the shelves. They can be made from wood or metal, as well as from other available dense materials. It is enough to cut the canvases of a suitable size and fix them on a metal base. |
 | If you wish, you can make the rack movable by fixing four small wheels. Or install it firmly in the designated spot in the garage. |
You can find other interesting projects and drawings for the manufacture of tool shelves. Watch a video on the topic:
And also make useful household appliances with your own hands:
1 of 4
We make a carpentry workbench with our own hands according to the drawings: video instructions and photo examples
Among the common devices with their own hands, a workbench is distinguished. Strong and dimensional, allowing you to securely fix the workpiece, useful for high-quality cutting of wood and the creation of various elements from it.
The package includes:
- Working surface. For her, use a solid one in order to increase the service life of the device. The thickness must be at least 6 cm.
- Supports. Collected from wooden beams or metal plates. The main task is to ensure the stability of the entire mechanism.
- Vise for fixing the product. If the table is long, you can install two vices at once.
- Tool box. Useful recess or pull-out design for quick access to the small parts you need.
To independently assemble a carpentry workbench for your workshop, you should choose a drawing, purchase material for work.
DIY carpentry workbench drawings
Before buying materials for assembling your own workbench, you should think about a detailed drawing. It should include the dimensions of the machine itself, it is advisable to note the dimensions of the materials used and their quantity.
For example, a ready-made drawing of a folding workbench with your own hands may look like this:
Whichever model you choose to create, consider several features of the desktop that make it easy to cut wood:
- the height and length of the hands of the master: the height and width of the tabletop depend on these parameters;
- which hand is working: place a vice to the right or left;
- what blanks will be made: selection of the shape of the table;
- what area in the room set aside for the workbench.
Considering all these parameters, it will be easier for you to decide on the drawings of the joiner's workbench and the dimensions of the machine. Here are some interesting examples:
DIY instructions for assembling a wooden workbench
You can buy a wooden workbench in a store or through online catalogs, but it's cheaper to make one yourself. Let's take as a basis a simple version with typical tabletop dimensions: length - 150-200 cm, width 70-120 cm.
The manufacturing work will include several stages:
| Image | What need to do |
 | Make the top cover from thick ones so that you get a shield with a width of 70 to 200 cm. Fasten the elements with long nails, and you need to drive them in from the outside, and carefully bend them from the inside. The working surface of the workbench is made only of wood or. |
 | Sheathe the lid along the lower perimeter with a 5 x 5 cm bar. This will make it more convenient to attach the vertical supports. The location of the supports depends on the size of the tabletop. It is better to make them from a thick rectangular bar of at least 120 x 120 mm. |
 | Install the carpentry workbench correctly. Be sure to secure it firmly. If it will be mounted outdoors under a canopy, then dig holes for the supports. Use other fastening methods indoors. |
When the structure is assembled, install a vice on it. To fully understand how to assemble a carpentry workbench with your own hands, watch the video:
Making a joiner's vice for a workbench with your own hands
Professional "homemade products" assemble not only tables for work, but also a vice with their own hands according to drawings. Any design of such a clamp will include several elements:
- Supports where each one falls with a clamping jaw.
- Moving clamping jaw.
- Metal guides. A sponge moves along them.
- Lead screw for moving elements.
- Vorotka. Required to rotate the screw.
When making homemade vices with your own hands, you can use various materials at hand. For example, there is a design option from a profile pipe. To do this, prepare several pieces of pipe of different sizes, a steel stud with a coarse thread and double nuts.
Instructions for creating a vertical vise from a profile pipe:
| Image | What need to do |
 | The largest pipe acts as a body. Supports are soldered to it from below. On the back side, a 3-4 mm steel flange is put on. In the center, a hole is drilled for the running nut, and opposite the front support, the rear jaw. |
 | On the inner movable part, the front steel flange. A stud is mounted in it, with lock nuts fixed to it. Thrust washers are put on both sides of the flange. The last element is a movable tube attached to the front jaw. |
And also watch the video "do it yourself vise at home":
DIY metalwork workbench drawings made of metal
Locksmith's metal workbench does not differ much from the carpenter's one. It is based on a rigid metal frame, not a wooden frame. A vice is attached to it, and the entire workbench is designed to withstand the force of a blow with a sledgehammer.
Do-it-yourself metal workbenches can have one, two or three pedestals, and also do not have shelves and drawers for small parts. In terms of strength, for working in a garage, you can make an ordinary table of metal up to 5 mm thick and a reinforced structure, where sheets from 10 to 30 mm are applicable.
Here are some useful blueprints for making a metal workbench for your workshop:
How to make a tool for sharpening knives with your own hands: drawings and photo examples
Not a single house can do without a knife in the kitchen. It is quite difficult to make the correct one without special devices: it is necessary to maintain the desired angle and achieve the ideal sharpness of the blade.
A certain sharpening angle must be observed for each knife:
- The razor and scalpel require a 10-15⁰ angle.
- Knife for cutting bakery products - 15-20⁰.
- Classic multifunctional knives - 25-30⁰.
- For hunting and hiking, take a device with a blade angle from 25 to 30⁰.
- If you want to cut hard materials, then sharpen at an angle of 30-40⁰.
To ensure the desired angle, it is worth buying or making a sharpener. For example, you can assemble a sharpener with your own hands.
A comment
Tool selection specialist "VseInstrumenty.ru"
Ask a Question"If you do not use sharpening every day, then 1000 rpm is enough for a high-quality result and a long service life of the device.
"To assemble such a machine, a 200 W washer motor is useful. Completely to create a sharpener from an engine from The progress of work on creating such a simple device will be as follows:
- Sand the wood blocks with sandpaper to remove any burrs. Mark up according to the desired angle.
- Attach a stone to the line you drew to sharpen the blade. To do this, attach it to a block and mark its width. Then, on the markings, make cuts, up to 1.5 cm deep.
- In the resulting grooves, fasten the abrasive bars so that the grooves coincide. Then, install the sharpening stone by screwing it onto the bolts.
There are many ways to make a home knife sharpener. Pick the right one and try to create a convenient and useful tool for your home.
How to make a tool for sharpening a drill for metal with your own hands
They independently make not only a sharpener for blades, but also a machine for sharpening drills for metal. Here are some blueprints that are useful for the job:
Ready-made home machine The simplest and most common version of such equipment for a garage is a converted drill. For work you will need: - bed for the base;
- rotation mechanism;
- vertical rack.
For the rack, either boards are usually used. The weight of the drill is small, so there is no need to use metal. In this case, the bed must be made massive in order to reduce vibrations during the operation of the device.
To correctly connect the bed and the vertical rack, as well as assemble all the equipment into one whole machine, pay attention to the video instruction:
Drawings with dimensions for a drilling machine do it yourself
To correctly make any machine or practical device for private use, you should first make a drawing with dimensions. Only then proceed with the preparation of materials and assembly of the device.
Here are some examples of drawings of drilling machines from a drill with your own hands:
And you can also make a homemade vise for a drilling machine. Below is a video instruction for assembling such a device:
Article
And any car enthusiast can make accessories for the garage with his own hands. Such homemade products allow you to competently use the space, choose a convenient place for your tools, and not put them anywhere, and not spend money on buying expensive professional equipment.
Tool storage rack
If your garage has a lot of tools and other garage gadgets, then a rack would be an ideal place to store them. With its presence, a lot of free space is formed in the garage, and the motorist will not waste a lot of time trying to find the right tool.
The rack can be easily made by yourself. Usually it is made of metal or wood, but the first option is too difficult at home, although it is more reliable, so motorists often stop at the second option.
To extend the shelf life of your shelving, you need to choose strong wood species such as oak or beech for its production. A rack made of this material can withstand a load of up to 180 kg. In practice, this weight is often exceeded. However, it should be borne in mind that a rack on which tools weighing more than 300 kg are stored is a danger to a motorist.
A do-it-yourself garage rack is easy to make according to the following algorithm:
- Rack props are made first. To do this, a 9 cm wide board is cut into pieces of different sizes.
- To make shelves, you need a thicker board. It is cut into equal parts of the required width.
- On the board, which will be the base of the rack, mark the points where the spacers will be located. From them to the edge of the board should be 3 cm.
- The top post is attached to superglue, then the shelf is nailed to it. Do the same with the remaining props and shelves.
- Then the base of the rack is fastened to the spacers using screws.
At the end, the surface of the rack is sanded with sandpaper and two layers of oil varnish are applied to it. It is attached to the wall using anchor bolts located under the upper and lower shelf.
Shelves
If it is not possible to put a rack in the garage, it can be easily replaced with shelves. They can be hung at any height and save floor space.
First of all, you need to determine where the shelves will be located. The selected area is divided into squares of equal size. In their corners there will be dowels holding the shelves. For a more secure fixing of the shelves, it is better to use dowels with hooks at the ends.
Then holes are made in the wall with a puncher for fasteners. Hangers with lugs are attached to a thin board. The distance between them depends on the markings made earlier. Self-tapping screws are needed to secure metal hangers.
In order to make the bottoms of the shelves, several boards are cut into equal parts. The walls are made from thicker boards. They are attached to the bottom with nails or glue. Finished shelves can be painted or varnished.
Now all that remains is to place the shelves on the wall. During installation, care must be taken that the shelves do not twist and move easily along the guides. For convenience, wooden handles can be attached to the front walls.
Plastic canisters can also serve as material for the shelves. To do this, cut off the side wall of the canister.
To make the work look neater, you always need to cut off either only the right one, or only the left one. Then the edges are processed with a file.
The shelves are then placed on the wall or used as drawers in a rack.
Bracket for tires
A set of tires is the most bulky part of a car, so it's better to make a separate bracket for storing them, rather than trying to find a place for them on a rack with other tools.
For a garage bracket, two triangular frames from a corner are needed, which will be interconnected by jumpers from any rolled metal. The frames are attached to the wall. The tires are located perpendicular to the supporting structure, falling slightly between the jumpers.
Universal machine from a drill
A car enthusiast needs a lot of different equipment, but it is very difficult to place them in one garage. To save space, mechanisms are created that perform several functions.
From an ordinary drill, you can make a homemade machine that works as a grinder, lathe, sharpener, circular saw.
For the base of the machine, a board with a thickness of 2–2.5 cm is chosen. A drill is fixed on the part where the handle will be attached. The place for installing the drill is selected depending on the size of the circular disc, cutter, sharpening stone, grinding wheel.
To secure the drill, a rigidly fixed threaded rod and nut are used. Hardness of fixation is achieved by using epoxy glue and a 2mm pin. Next, a moving sole is created.
Further, the saw blade with a diameter of 15 cm, on which there should be a protective metal casing, is placed on the drill chuck. A gap is made in the bed. If you plan to use a flat cutter, and not a disc, then it will require an extension of the saw hole or another rectangular slot.
To create a cutting machine, a swivel arm, a miter box, guides and a mechanism that will fix the workpiece are placed on a securely fixed surface.
The cutting mechanism is aligned with the circular saw on the base. Grinding machines and machines are made using the same method.
Observation pit
Sooner or later, any car will need to be repaired. And so that its owner does not need to crawl under it, a viewing hole is dug in the garage floor.
The first thing to do is to make chalk markings in the place where the car is parked. It should be noted that the length of the pit should be 1 meter longer than the length of the machine. The width should be sufficient for comfortable work, but less than the distance between the wheels. The depth of the pit depends on the height of the garage owner. You need to add 20 cm to it.
After calculating the size of the hole and marking, you can dig the hole. The thickness of its walls depends on the material with which its walls will be laid. When using bricks, this figure should be 20 cm, when filled with cement - 12 cm, when installing building blocks - 22 cm.
The pit walls need a hydrophobic impregnation to protect them from moisture. The impregnation is applied to the inner side of the material with which the walls are lined.
In the front of the pit, steps are made of cement. To make steps of the same size, you need to calculate the lifting height and calculate their number.
We will send the material to you by e-mail
For the rational use of space, communications and devices for the garage are used with their own hands from scrap materials. It is necessary to use walls, an underground level in the process, place it indoors, organize normal lighting.
DIY garage accessories
For the comfortable operation of a room intended for storing a car, you should adhere to certain recommendations:
Depending on the size of the building, the area occupied by equipment, fixtures, and communications should not be more than 10 - 20% of the size of the garage floor.
Storage locations, racks, workbenches
In 80% of cases, do-it-yourself garage fixtures are constructed to store accessories, tools, and vehicle equipment. It should be borne in mind that the most bulky parts of the car are sets of winter / summer tires, depending on the season.
The main nuances of these designs are:
The width of the pit should allow the driver to enter it without lighting.
Lighting and ventilation
In garages, parallel lighting circuits are more often used. One lamp allows you to use a specific area, several devices are turned on during major repairs, visiting the cellar. The minimum power consumption is ensured. Daylighting devices have a great resource.
In cars, poisonous, harmful fuels and lubricants are used, therefore, do-it-yourself devices for ventilation of the garage, allowing you to create air exchange, become relevant. The inflow is organized from below:
- garage - air vents in the masonry, protected by gratings;
- cellar - a pipe from the garage or from the street.
The hood is mounted under the ceiling of the cellar, the roof of the garage, or has the form of vents in the main walls at the highest points.
Related article:
Other helpful ideas
Useful accessories for a garage with your own hands can be made from used utensils, inventory, materials left over from construction. For example, by gluing the lids of plastic cans horizontally / vertically, the owner gets a convenient transparent utensil for tooling or hardware, which is always at hand.
Homemade machines
Garage accessories can also be assembled from a power tool:
- drilling - a drill fixed with clamps in a device moving a gear along a rail;
- detachable - similarly clamped angle grinder with equipment for metal or wood;
The advantage of the machines is a more accurate positioning of the tooling relative to the workpiece. The equipment turns out to be collapsible, the drill and angle grinder can be removed and used as intended.
Related article:
Hydropress
The simplest design is obtained from an automobile hydraulic jack. To press out / press in bearings, press / compress parts, you will need to build a frame and a removable movable stop. The frame consists of 4 channels welded to each other. At the top, the structure is reinforced with stiffening ribs (kerchiefs), at the bottom, transverse corners are added, giving the frame stability.
The stop is pulled in a normal position to the upper crossbar of the frame by powerful springs. A hydraulic jack is installed between them, if necessary, pressing the stop to the lower crossbar of the frame. The force of the press is regulated by a jack, the dimensions of the working area are selected depending on the size of the workpieces.
And finally, a few more examples of useful things for the garage.
Who said that crafts are not interesting for men, it's just that if women read with great pleasure about how we are, then for motorists there is no topic more entertaining than DIY homemade products for the garage... In fact, there are a lot of devices with which you can ennoble your garage life, so there will be something to do throughout the long winter.
Useful homemade products for the garage with your own hands
There are original, interesting products that you can make yourself, but there are useful homemade products for the garage with your own hands... First of all, such things include furniture: cupboards, tables, hangers. All this allows you to optimize the surrounding space as much as possible, especially if your footage is not too large.
Most often, during the initial arrangement, all the necessary furniture is ordered. But if you rent a room or do not want to take money out of the family budget for this, then you can easily settle down on your own, especially if you know how to hold basic tools in your hands. To help yourself and for inspiration, you can use the video from homemade products for the garage with your own hands (YouTube can please you with a variety of ideas), or you can take into account the tips for arrangement, which will be the basis for a successful layout.
If you look at a photo that demonstrates the optimal set of useful furniture elements, then note the useful nuances for yourself. First, the location of any storage system should be located at a certain distance from the walls. It is believed that there should be at least half a meter between the machine standing inside the room and the rack for normal, comfortable work inside. If the shape of the storage of your car is more like a rectangle than a square (this happens quite often), then it is worth moving the entire storage for tools and useful things into one zone along the far wall opposite the door. It is here that you can place with maximum convenience not only a table or a rack, but even a carpentry or lathe. It is not superfluous to mention that the entire storage of your tools should be placed inside the garage only if it is securely closed or is under the protection of tightly closed ones. Otherwise, it is better to place there only the most necessary, preferably not of particular value to the robbers.
If you envisage in a separate room, which is located on the territory of your suburban area, then it is better to make them of the so-called attic type, that is, located in the roof, and, moreover, choose a place just above such a working area. In the summer and spring, such an arrangement of windows will help you save on lighting, there will be enough sunlight for all types of work, besides, you can also ventilate the room, because ventilation cannot always cope normally, especially if you are going to study inside. like in a workshop.
With a total shortage of money or out of love for art, you can make an original storage system using old empty canisters. Every motorist accumulates a lot of them over the course of a year, and if you ask fellow neighbors, there will be enough for each compartment of such an interesting locker. Of course, there is nothing difficult here, and for performing such homemade garage do it yourself video-the lessons are not needed at all. You need to take a plastic canister, wash it well so that no traces of its contents remain. Armed with scissors for metal, a knife or other tool, we cut off the front cover from the canister, but so that the sides remain, and the contents do not overflow. To make the structure more stable, you can fix it on the back wall using self-tapping screws, but we will, of course, drive them not into the wall, but into a wooden rail, which we attach to dowels.
Homemade garage do-it-yourself photos
Continuing to explore options homemade for the garage with your own hands, photo which you have already seen and will see below, we must look at other ways of rational storage. If the horizontal pull-out shelves simply do not fit inside, then you can make very original and functional vertical shelves. You will be surprised how many things they can fit into themselves, while the tools will be easily accessible and, as they say, “at hand”.
The same option as shown in the photo can be used in, because there, too, it is often necessary to equip a workshop, and even less space is allocated for it than remains in the garage. For such a design, you will need to build a frame of wooden planks, and make notches along its upper and lower edges, where the cells will be inserted. Most likely, the inspiration for this design was the classic hives that are used for breeding bees, the system is exactly the same. Sheets that are inserted inside have a perforated surface and the presence of these small holes will allow you to screw nails inside, hang hooks in order to hang tools and useful devices as conveniently as possible so that they do not fly off when sliding in and out.
The exact same perforation can be incorporated into a furniture set. With such a complete set of everything you need for a home craftsman, you can build many useful homemade products for the garage with your own hands, video with which there is on the network. In terms of popularity, such resources may soon overtake popular hand-made projects, because men, no less than women, want to make the space around them, their kingdom, beautiful, functional, and comfortable.
Interesting DIY homemade products for the garage
Let's digress a little from the useful and talk about things that are not necessary, but no less useful than traditional furniture, machines, lighting or heating. Let's remember that for many men the garage is a real men's club, where you can equip everything to your liking. We offer you a couple of options interesting DIY homemade products for the garage that support the automotive theme and can be used for long get-togethers.
We are used to the finally worn-out tires either simply throwing away, or tinkering. Having examined the last winter set for a swan or a flowerpot, this year you can easily allocate it to yourself by making a whole furniture set. Frankly speaking, for this purpose, you will need not only car tires, but also bicycle tires, because they can be used to design backs by turning a stool into a chair.
Practice making such furniture and soon you will be able to replace your coffee table with this one. They look not only beautiful, but can also become part of the original design concept.
A table and chairs are great, there will be where to sit, but with the question of what to cook a delicious shish kebab, our next idea will help here. The fact is that an ordinary folding brazier may not maintain the required temperature of the coals for a long time, and if you like to sit near the fire for a long time, you should make something larger. we will modernize a little and present to your attention a brazier made on the basis of a wheel rim. In order for the rim to maintain the set temperature well and not let the coals cool down, it must be covered with bricks, but for the maximum decorative effect of such a homemade product, it is better to file them a little with a grinder to fold them in a circle. The bottom must be covered with any available material that does not support combustion, for example, fine crushed stone.
Homemade garage do-it-yourself drawings
Returning from entertainment to business again, you need to understand that for many, a garage can be an alternative to a workshop, in which you can serve not only your needs, creating crafts for your apartment, dacha, or even for repairing a car, but also performing small orders. In order to make high-quality useful homemade garage do-it-yourself drawings, diagrams and technical recommendations will definitely come in handy for you.
If you plan to spend a lot of time in your impromptu workshop, then among those you are interested in homemade do-it-yourself garage - heating, lighting, ventilation, that is, the arrangement of a full-fledged comfortable stay inside for a long time. Some people prefer to install infrared heaters, but from the point of view of the cost of electricity, this will not be a very rational option. Hot water heating can be a good option, but it is best designed in garages that are located next to a residential building.
You can place solid fuel boilers of any design inside a garage of any type, even make your own stove-stove made of metal using a welding machine. But do not forget that with this type of heating, the interior decoration must be made of non-combustible materials, and the ventilation is done with high quality, even at the stage when we, in order to timely remove all combustion products from the room.
DIY homemade machines for the garage
Even if you are a non-professional carpenter or turner, all the same, on the territory of the garage workshop you will need the most convenient and compact machine tools. DIY homemade products for the garage workbenches can just become - tabletops on which various electrical tools are attached, for example, a jigsaw, a milling machine, a lathe. A metal worktop will last much longer than a wooden worktop, so you can easily combine wood and metal.
