Wooden houses are particularly cozy and practical. Houses made of timber are the most durable and comfortable, but they are more expensive than frame houses. The latter are built faster and are cheaper, which explains their current popularity. Very practical are houses with attics, in which the walls of the first floor consist of timber, the walls of the second are made using frame technology. This type of house is durable, comfortable and profitable, since with the same building area you get significantly more square meters of living space. The first floor can also be frame, then the total cost of the house will be cheaper.
Thus, by choosing a house with an attic, you can get a large living area by fitting into the layout an entrance hall, kitchen, toilet, cozy veranda or spacious terrace, etc. A one-story house can also have these elements, but at the expense of the spaciousness of the rooms and their number. When buying a house for a summer residence, it is also worth considering whether you are going to live there during the cold seasons. If yes, then you should pay attention to the opportunity to choose:
- a thicker layer of insulation (subprojects K100);
- two-chamber, not single-chamber windows;
- additional insulation on floors, gables, ceilings;
- treating the house with a wind and vapor barrier membrane.
There are 4 projects in this category of houses, but there are many more construction options. Possibility of change internal layout, material for construction of structures and type of foundation, allow you to get a house 6 by 7 meters even for permanent residence or in the basic configuration for a complete country holiday.
Construction options
Depending on the purpose of the house and the financial capabilities of the client, the house can be built from profile timber of various thicknesses 90x140, 140x140 or 190x140 mm “shrinkable” (shrinkage) or “turnkey”. Alternative option It is an insulated frame structure with varying thicknesses of the heat-insulating layer from 100 to 200 mm. When constructing a structure from timber, the client can choose a material with natural moisture or dried in a special chamber with a small surcharge. \
Changes to the internal layout of the house involve the arrangement of the bathroom and the installation of additional partitions.
Equipment
All 6x7 house designs have attic floor, it is erected using frame technology, including in those houses that are built from timber. In buildings with a sloping roof, the attic is different larger area, it is possible to equip two rooms or move the toilet to the second floor.
For the foundations of 6x7 meter houses, we recommend using pile-screw, pile-driven (also known as reinforced concrete piles), or shallow-buried strip foundations. The choice depends on the type of soil and its susceptibility to swelling when the soil freezes.
The basic package includes the installation of wooden window frames With wooden platbands, but if desired, we can replace the windows with PVC single-chamber or double-glazed windows, With plastic window sills and metallic white tints.
To ensure that the geometry of openings in structures made of timber remains unchanged, the client can order the installation of casing bars (frames) for an additional payment. The installation of frames is especially necessary for plastic windows.
For frame structures the issue of geometry violation is practically irrelevant. Construction technology allows you to build quickly and without problems in the form of shrinkage changes. But unlike a timber structure, frame house requires significant work not only on the construction of the frame, but also on the internal and exterior finishing. Thermal insulation qualities frame house 6 by 7 meters depend on the thickness and type of insulation (roll or slab).
The website of IC DomaStroy contains all the necessary information, after reading which the client can calculate the total cost of the future home, taking into account certain changes in the basic project. Availability of any information on design changes and published prices for implementation extra work minimize the need to clarify details.
To become the owner of a private house 6 by 7 meters, you need to purchase or use an existing plot of land, create a project for the future structure, correctly calculate and take into account many nuances. To implement your plans, you can use the services construction organization, which will take over all stages of the work. However, this costs a lot of money.
Below we will try to figure out how to design a house yourself, and what layout will be most suitable given such dimensions.
The project and its main points
A project that fully meets the requirements must take into account a lot of nuances. That is why the design is carried out in several stages. First, architectural calculations are made. This stage is considered the main one, since it is aimed at clarifying all the initial data of the future structure. The latter will allow you to find out the approximate costs of building materials.
It is not possible to determine the exact amount, but this is not absolutely necessary. The workflow will make small adjustments to the pre-prepared plan. At this stage, the number of floors of the building is clarified, the issue of finishing the facade is resolved, the number of rooms and additional premises, their area, etc. is specified.
Secondly, it is necessary to think through the issue of placing all communications and find the most best option to create the foundation of a house.
Having determined the dimensions of the building, in our case we're talking about about the project of a 6 by 7 house, we get a total area of 42 m2. Living space determined by adding the areas of all available living rooms.
At the same time, it is important to remember that additional premises, such as a kitchen, hallway, veranda, bathroom, are not considered living space. In addition, it makes sense to take into account the specific features of the layout that give individual style to the living spaces.
Niches up to two meters in height, arched openings, floors under stairs - you need to decide whether they belong to a particular area. If the house has an additional attic floor, then the plan is drawn up for each separately.
Thirdly, information content will bring with it design roofing system. Properly made drawings will allow you to calculate consumption building material. Experienced designers advise drawing up drawings for each element of the building, as this will help simplify the process construction work and significantly save your budget on materials.
It would be nice if issues related to ventilation system, electrical wiring and chimneys in case of using a fireplace, stove or other heating equipment.
Now a few words about structural elements. Before you start building walls, you need to carefully study the pre-prepared foundation design. If the house is built from foam concrete blocks, this is one thing, but if a frame house is built up to 6 by 7, then the issue with the foundation will be resolved differently.
Another important step in independent design and the layout will include a detailed description of the roofing system. Calculations of the maximum load (snow, wind, from its own weight) are carried out, the required cross-section is selected rafter legs, in the case of arrangement of the attic, the issue of insulation, etc. is resolved.
The main requirement is careful calculation so that situations do not arise when something has to be radically corrected during the operation of the home.
Separately, lists of all main and additional components are compiled: doors, windows, related fittings.
Vital communications also place their emphasis in the overall design. Electrical wiring can be easily placed in foam concrete or aerated concrete blocks. To do this, you need to use a special perforator attachment to make a recess in the wall to suit the size of the wires.
If the walls are made of wood, then it is better to use special channels for cables. The design stages are closely interrelated, so you should have a clear understanding of the thickness interior walls. Laying wiring in a 10-centimeter wall with voids is impractical.
Water supply in block houses will also make adjustments, since pipes placed inside the wall will lead to damage in case of leakage wall material. The simplest option would be to have all the pipes located externally. You can hide them behind plasterboard walls by making viewing windows at the main connecting points
Layout of a one-story house
If there is financial opportunity to build cottage 6 to 7 is possible in one season. The total area of the building will be just over 40 m2, which will allow it to be placed on almost any plot of land. The house design will be compact, simple, convenient and, most importantly, economical in layout.
The entrance to the house is through a small vestibule. The internal premises are a boiler room, an entrance hall, a bathroom, a kitchen combined with a living room and a bedroom. All of them are located extremely conveniently, being interconnected. By right side In the hallway there is a boiler room and a combined bathroom.
Against front door at the end of the hallway there is a bedroom. On the left side there is a spacious living room with kitchen area. Rationally placed windows create sufficient lighting, so the house can be oriented in any way. A family of three can fit perfectly in it.
Attic and its advantages
The layout of a house with an attic can give coziness and convenience due to the absence long corridors and connecting openings. On the ground floor, a spacious hallway smoothly transitions into a living room combined with a kitchen area. On the right side of the house there is a boiler room with a separate entrance from the street and a compact bathroom.
Between them there is a staircase to the attic floor. An option is possible when the boiler room borders the bathroom, and the staircase is located in the corner of the house, resting on load-bearing walls. The house has a vestibule along two load-bearing walls There is a veranda.
The attic floor is made in simple version gable roof, which facilitates and speeds up the construction process. On the sides of the stairs there is a storage room and a large bathroom. A small hall leads to two cozy bedrooms.
Since the size of the residential building is small, its internal space can easily do without additional load-bearing walls. Thanks to this fact, the layout of a 6 by 7 house is free and can be changed as needed.
Besides, small size at home solves the old one, but current problem, When small area land and the density of private sector development lead to a number of violations of sanitary and fire safety standards.
The considered dimensions of a residential building make it possible to create a wide variety of layouts interior spaces. Whether convenience and beauty, comfort and functionality of the home will be combined will depend on careful planning and high-quality execution of all construction and finishing work.
If you wish, you can look through a lot of catalogs where you will find photos of a private house 6 by 7 meters with good layout. It is quite possible that more than one option will be satisfactory in your particular case. All that remains is to make a choice and start creating your dream home.
Photos of houses measuring 6 by 7 meters
Houses made of 6 by 7 timber are your choice if you want to get Vacation home with two bedrooms and a luxurious living room! For ridiculous money, the client receives magnificent countryside housing. If necessary, they can be used year-round.
The SK Domostroy company offers its clients a dozen country houses, which differ in size, thickness of the timber used and materials used for interior decoration.
Options for 6x7 house designs
Projects of 6x7 houses may vary from each other. However, standard projects with attics it is meant that the living room and kitchen will be located on the ground floor, and a couple of bedrooms will be located on the second floor. This design is optimal. Ideal for the vast majority of customers. Ready country houses 6x7 prices are small. They are quite affordable for any working person.
It is also possible to build a house according to individual project. The number of rooms and their size can be adjusted at the stage of building the house.
Classic projects frame houses 6x7 intended for those people who are small country cottage size 6x6. According to their own overall size such houses are small, but here are their effective area about 80 square meters(including the second floor). This is more than enough to accommodate a family of 3-4 people.
The Mir Dach company is sensitive to market demands and has in its portfolio projects of houses measuring 6x7 with excellent interior layout.
Typical projects of 6x7 frame houses from Mira Dach
Standard 5x7 frame house project from the company Mir Dach can be considered a project called “Tristan”. This cottage can be assembled from frame elements of different thicknesses (100, 150 and 200 millimeters), which significantly affects its cost. At the same time, the layout of the cottage has not changed.
On the ground floor there is a kitchen, living room, toilet, hallway and small terrace. The entire space of the second floor is reserved for a large bedroom with an area of over 20 square meters.
