How to glue non-woven wallpaper? This question interests those who want to do renovation work with your own hands. This material, perhaps the simplest for wall decoration. The most popular wallpapers are produced on the basis of non-woven fabric.
The most popular wallpapers are produced on the basis of non-woven fabric
This material, when compared with ordinary paper, has many advantages. It has greater ductility and can be glued to uneven walls, on the ceiling without bubbles or folds. The strips do not need to be lubricated with glue, which makes the work process easier.
In order to properly cover walls, you can use basic work techniques. After fixing a couple of bars, a stable skill will appear.
Hanging non-woven wallpaper does not require much effort. Before starting repairs, you need to take measurements of the room and draw a plan, taking into account all the parameters. It is important to take into account door and window openings.
It is worth choosing materials in advance. Can be purchased in store ceiling wallpaper on a non-woven basis or opt for regular ones.
The calculation must be performed after specifying the length of the roll. This value should be divided by the height of the wall, the result will be a number. It will mean how many whole strips can be made from 1 roll.
This material, if you compare it with regular paper, has many advantages.
How to do the calculations correctly? If the roll is divided into strips without any residue, it is better to buy 1 more. This will create a supply of material for gluing the walls above the door and window openings. For products with large designs that require registration, an image matching surcharge must be taken into account.
To carry out the work you must purchase the following:
- Materials that can be used to level the surface.
- Glue. It should be selected in accordance with the material manufacturer's recommendations. For waterproof surfaces, a primer is required, preferably from the same manufacturer.
- A roller, preferably soft. To apply glue in the corners you will need a brush.
- Glue container. For example, this could be a plastic bucket. Its width should correspond to the roller.
- Hard roller. It is required in order to roll non-woven strips.
- A utility knife, but you can also buy scissors. They are used to trim wallpaper.
- Plumb.
All tools can be purchased at a specialized store.
How to hang non-woven wallpaper (video)
How to prepare the surface?
Before gluing the material, the walls must be carefully prepared. All surface leveling work must be completed before the gluing process begins.
First you need to remove the old wallpaper. It is very important to do this if they have a noticeable pattern or dark color. To do this kind of work, the strips are moistened with water, but you can use a very weak glue solution. The solution is kept on the surface for some time and then removed old material using a wide spatula. If the stripes are difficult to remove from the wall, it is easier to remove only upper layer, and leave the base.
How to properly glue ceiling wallpaper on a non-woven surface? The walls, if necessary, should be leveled using putty. All potholes are cleared sandpaper, it is important to repair cracks and chips. Since the glued interlining is transparent, the backing can be seen through. If the wallpaper is light or unevenly colored, the walls should be covered with a layer of putty.
Floors constructed from water-absorbing material must be primed with a special solution. It can be replaced with liquid wallpaper glue. The walls must be thoroughly dried before facing.
How to glue vinyl wallpaper (video)
Instructions for gluing
There is no need to apply glue to the strips. This is only required if repair work is carried out in the summer. On hot days, the substance is on concrete surfaces or on plasterboard walls absorbs immediately and dries.
Before starting work, you need to close all the windows, and do the same with the door. It is important to prevent drafts in the room.
If you use non-woven vinyl wallpaper, how to glue it so that it lasts for a long time? The strips need to be combined end-to-end; repairs can begin from any wall. It is more convenient to glue wide strips from the most visible angle. Because surfaces are often curved, the material may bunch up in corners. If such a situation arises, the strip must be carefully cut.
All surface leveling work must be completed before the gluing process begins. Gluing vinyl wallpaper on a non-woven backing is done in the same way. You can cut the roll into strips in advance, but the easiest way is to do it in stages. This method is more economical, but it is optimal only for monochrome wallpaper. The glue is applied with a roller using your own hands. It is important to saturate the walls evenly without leaving gaps.
The corners and the upper part of the walls should be coated with glue again, applying it with a brush. Having applied the strips to the surface, they should be aligned from the center to the edges. It is important to check them for verticality; for this you need to use a plumb line.
If the glued interlining is positioned evenly, it is rolled with a continuous roller. This must be done in order to completely remove air and prevent the formation of bubbles. Excess wallpaper needs to be trimmed sharp knife.
You can glue all subsequent strips in the same way. If the material has a large pattern, you must first apply a strip to a dry wall, join the pattern, and then cut the wallpaper to size with a small allowance. The strips are glued end-to-end, carefully smoothing the joints with a roller, promptly removing excess glue.
Conclusion
You can glue the non-woven material on your own. It is important to properly finish the walls in advance, filling in any unevenness, because the wallpaper will highlight them. The glue needs to be applied only to the wall, but in the hot season it also needs to be applied to the finishing material.
Attention, TODAY only!
Tsugunov Anton Valerievich
Reading time: 5 minutes
Among many options wall decoration The leading position is occupied by wallpaper. They come in a wide variety of types, textures, designs and colors. Most practical option– non-woven fabrics, which greatly simplify the gluing process and hide small flaws and unevenness of the base surface. Gluing wallpaper on a non-woven basis is not at all difficult, we suggest you understand the intricacies of this process.
Types of non-woven wallpaper
Almost any hardware store can offer a whole range of wallpapers containing non-woven material:
- Fully non-woven. Moisture- and fire-resistant, low-flammability, strong, durable, airtight type of canvas. Can be single or multi-layer. A common option is non-woven wallpaper, designed for painting after pasting or decoration.
- Paper on a non-woven basis. They are distinguished by high breathability and low price. Thanks to rolling through a press, they have three-dimensional designs.
- Vinyl on a non-woven backing. Applied to the substrate PVC coating, allowing you to create unique textures and an abundance of patterns. The surface can be foamed or hard, which determines the relief and density. Such wallpapers are immune to sunlight, mechanical damage, moisture, but do not allow air to pass through well.
- Textile on a non-woven basis. The top covering is natural linen, cotton, silk. In addition to the original, aesthetically attractive appearance, they provide additional sound insulation, and the joints of the strips are invisible.
- Hot stamping wallpaper. A subtype of vinyl sheets based on non-woven fabric. The use of special technology allows you to create three-dimensional designs that imitate fabric or leather. An example of this finishing material- in the photo below.
Features of working with non-woven wallpaper
- The surface of the walls must be leveled and have a uniform color, otherwise it can be damaged. appearance finished finishing. By the way, if the wall is a little uneven, thanks to the dense structure of the wallpaper, such a defect can be hidden.
- The adhesive composition is applied only to the surface of the wall. This makes it possible to significantly speed up and simplify the work and reduce glue consumption.
- Wallpaper strips must be glued end-to-end, without overlapping. Thus, it is possible to create a single canvas on which there will be no bulges or seams. If there is a pattern on the material, it is important to ensure that it matches.
Due to the fact that non-woven wallpaper rolls are often produced wide (up to 140 cm wide), the number of seams is reduced to a minimum.
Tools and materials
Before you begin the process of wallpapering with non-woven backing, you need to ensure that you have certain available tools. To work you need to prepare:
- a convenient wallpaper spatula for leveling pasted strips;
- rubber roller;
- several brushes of different sizes for applying glue to the wall;
- adhesive composition intended for the selected type of wallpaper;
- a container of suitable volume for diluting glue;
- a brush that helps smooth out wrinkles;
- construction knife;
- clean sponge;
- plumb line or level bar;
- mixer attachment for drill;
- a marker or pencil capable of writing on the surface of the wallpaper;
- sharp scissors.
Proper wall preparation
In order for the newly created interior to serve conscientiously, it is necessary to carry out a number of preparatory measures:
- Filming old finishing, clean the wall from dirt and dust. This is especially important if it has a dark color or a bright pattern. Deletion rules different types coatings – in . Methods for removing paint - .
- We level the surface of the walls, clean out potholes, chips and cracks with sandpaper. We cover work surface putty. When choosing a wide wallpaper, this is done especially carefully, otherwise it will not be possible to join the strips exactly.
- To improve adhesion and prevent mold formation, after the putty has dried, the walls are coated with a primer. deep penetration. Further work can be started only after it has dried.
The preparation steps are described in detail in; drywall is prepared according to the rules that can be found.
If we're talking about about gluing textile wallpaper To ensure that the surface does not differ in tone from them, it is recommended to use a waste paper backing. Glue it horizontally so that the joints of the lining are not visible through the wallpaper.
Marking walls and preparing wallpaper
We recommend starting marking from the most inconspicuous corner. If you purchased wallpaper with a width of 106 cm, measure 104 cm from the corner and draw a vertical line along the marks. This will become a guide for attaching the first of the strips.
Using the drawn line, we measure the distance between the ceiling and the floor. Using sharp scissors or stationery knife, cut the wallpaper strip to the appropriate length. It is better to do the cutting immediately, taking into account the need to combine the pattern.
Gluing technology
The work is performed in the following sequence:
- We coat the rectangle marked on the wall surface with adhesive. We do this carefully, without omissions. A thicker layer should be applied to the corners.
- Glue the first strip. It should be dry. We make sure that its edge clearly coincides with the drawn line. A small overlap is made on the ceiling molding.
The presence of a gap between the floor surface and the wallpaper is considered uncritical; it will be closed with a plinth.
- To press the wallpaper, use a clean rag or plastic spatula. We perform smoothing movements from the center to the edges, starting from the ceiling and gradually moving lower.
- We glue the remaining strips in the same way, focusing on the edges of the previous sheets. By moving the sheets, we eliminate any cracks and overlays that appear. To remove excess glue, use a soft sponge and do not let it harden.
Wallpaper based on non-woven fabric glides on the glue and does not wrinkle. After applying the canvas to the wall, it can be easily leveled and adjusted within at least 10 minutes without compromising the quality of the adhesive.
Now the construction market offers a huge amount of materials for repairs. Wallpaper manufacturing technologies are progressing every year. Paper sheets have been replaced by vinyl and non-woven durable and beautiful coatings. The modern buyer often prefers non-woven vinyl wallpaper because of its many advantages. Let's look at the features of repairs using them.
What to stick with?
When you purchase canvases, one of the first questions that arises is what glue to choose for working with them. A huge advantage now is that in any store you can find specialized compounds for various types canvases: non-woven, vinyl, paper, glass wallpaper and even universal. The seller will help you navigate your choice.
But there are cases when the necessary glue is not available or the price is prohibitive for your budget, then you need to choose a worthy replacement.
Vinyl wallpaper on a non-woven base is quite heavy, so the glue in any case must be of high quality and specialized.
Main component adhesive compositions now it is modified starch. In addition to it, various additives are added that affect the properties of the glue. These can be antifungal additives that protect walls from mold and biological contaminants. Methylcellulose is also added to compositions for heavy coatings to improve sliding properties.
Cellulose-based vinyl wallpaper can be glued with either vinyl or non-woven adhesive. In the first case, the composition is intended for various types of polyvinyl chloride coatings. Its only disadvantage is that the composition makes the walls impermeable to air, and this reduces the environmental friendliness of the room.
And you need to remember that when working with non-woven wallpaper, the glue is always applied to the wall.
It is also advisable to choose non-woven glue. It is ideal for such coatings, it will allow the walls to breathe and help to adhere to any type of base. At the same time, you don’t have to worry about stains appearing on the canvases. Non-woven fabric tends to show color through, but the adhesive is specially formulated to resist coloring.
For rooms with high humidity You can opt for PVA glue. It will be able to hold thick and heavy wallpaper on the walls. But a significant disadvantage of such a product is the difficulty of dismantling the wallpaper. When will you do next repair, removing the canvases from the walls without disturbing the rough finishing layer will be almost impossible and very labor-intensive.
Preparing the walls
The first step in wallpapering an apartment is preparing the walls. First you need to remove all remnants of previous coatings. Anything that has not come off should be scraped off with a spatula. Then you need to putty all the damaged areas and cover them with a layer of primer for better adhesion of the wallpaper to the wall.
If you are renovating a new building, then glue wallpaper on concrete slab or brick wall, of course, it’s impossible. First, a rough layer of putty is applied to eliminate large irregularities, then it is primed, then a finishing layer is laid. It gives a special smoothness and light color walls. It also needs to be primed. This will also save glue, since it will not be strongly absorbed into the base of the wall.
Please note: if you leveled the walls with drywall or there are dark spots on them from previous treatments, they should be covered with finishing putty before gluing. This will protect you from the appearance of stains on canvases with a non-woven base.
If your choice fell on dark wallpaper with a large relief, then uneven walls do not need to be further processed. The canvas will hide minor defects. But in the case when the wallpaper is light and has an elegant fine texture and shimmer, it is better to additionally work out all the irregularities, otherwise they will clearly appear after the repair.
Marking of canvases
First, check all the batch numbers of the wallpaper rolls. They must be the same, the color and pattern must match. Non-woven vinyl wallpaper is heavier and denser than other types of wallpaper. They should be glued end to end, taking this into account when cutting the canvases. Another difference between them, for example, from coatings on paper based is that the interlining does not stretch after pasting. After drying, the joints will remain smooth without gaps or cracks.
For cutting tools, you will need scissors, a sharp utility knife, a construction pencil, a square and a long ruler. Rolls can be rolled out directly on the floor, making sure it is clean.
Another significant point is the presence of a drawing. If you have chosen regular wallpaper under plaster, then everything is simple here - feel free to cut the rolls into strips of the same length in a row. But in the case when the choice fell on hot-stamped wallpaper with silk-screen printing or foamed relief canvases with a large pattern, you need to adjust the pattern.
It’s good if the pattern repeats and the offset size is indicated on the rolls. If the embossed wallpaper has a large, varied pattern (for example, flowers different sizes), then it is better to adjust each canvas after pasting the previous one directly in place for greater accuracy.
It is more difficult to paste photo wallpapers due to the fact that the canvases are solid and can be quite large in size, but you get a single picture with very realistic images.
Preparation of glue
As a rule, modern wallpaper adhesive is sold in boxes or sealed bags of 200-500 grams. Inside is a powdery mixture that is resistant to temperature changes at long-term storage. Shelf life reaches up to 4 years in unopened packaging and 10 days in a diluted state.
To prepare the glue you will need a construction bucket, spatula or mixer. Pour the powder into a bucket and add required quantity Not cold water. The manufacturer always indicates the proportions on the packaging. Basically, the composition is stirred for several minutes, then allowed to stand for 5-10 minutes and stirred again.
The main thing is that the mixture is moderately thick and uniform in consistency. With budget brands of adhesives, customers often note a large number of lumps.
How to glue correctly?
Gluing vinyl wallpaper on a non-woven backing with your own hands is not so difficult, but it is better to take an assistant. The canvases are massive, often wide – meters long, and holding them alone is not very convenient.
It is important to ensure that the foundation is prepared thoroughly. Many people are concerned about the question of whether it is realistic to stick vinyl wallpaper on lime. If its layer is thin enough and of good quality, and does not crack or crumble anywhere, then you can try it. Take advantage deep penetration primer. Glue will keep the canvas on this basis. But if there is still damage and the layer of whitewash is large enough, it is better to wash it off and putty the walls again.
Wallpaper with a pattern must be adjusted in advance. Although, in order not to have to select patterns separately, you can roll them out from a roll directly when pasting. The main thing is to take into account the additional required length when purchasing.
There is a general step-by-step instruction wallpapering:
- We mark a vertical line from where we will begin work. Usually glued from the window. The line is drawn using a level and ruler.
- For convenience, you can make marks along the width of the canvases. This will make it easier to apply the glue.
- You need to smear the composition on the walls, not the canvas, to a width of just a little larger size roll.
- Apply the selected piece to the vertical and, using a clean rag or a special roller, smooth the fabric from the middle to the edges to remove bubbles and defects.
- Residues from below and from above must be removed immediately with a knife.
- The next canvas is placed tightly against the previous one. Even if you didn’t do it very carefully, you have time and the opportunity to move it thanks to the composition of the glue.
- The joints are worked out for better adhesion and invisibility of the seams with a rubber spatula.
- Excess glue should be removed immediately with a clean, dry cloth. Otherwise, it may appear later and ruin the appearance of the coating.
- Gluing vinyl wallpaper on non-woven fabric in the corners is quite difficult. Due to the thickness of the panels, it is impossible to glue the panels end-to-end. It is usually recommended to stick one strip with a 5-7 cm overlap on the other wall. On the second wall, make vertical markings with a level. And from there the second overlapping sheet is applied. Then a vertical line is marked and cut with a sharp knife. Remaining material is removed. The seams must be carefully glued, pressed and the remaining composition removed.
- Sockets and switches are usually dismantled before pasting, having previously de-energized the room. Then cross-shaped lines are cut in the canvases and the material is folded inward. And after drying, everything returns to its place.
- Vinyl wallpaper is usually inserted behind the batteries to a depth of 20 cm. They should be pressed using a rubber spatula or a small roller.
The rules for applying vinyl coverings to ceilings are the same as for walls. Start gluing also from the window, marking a line parallel to the wall. It is more convenient to unroll the rolls directly during the process to save time and not need the help of a second person.
Designers are now offering a non-standard approach to wallpapering walls. Instead of a vertical arrangement of canvases, you can use a horizontal one. This will give a new design effect, for example, if the wallpaper is striped or with a pronounced one-sided pattern.
Another important point– How long does it take for wallpaper to dry after hanging? The minimum time indicated is one day after pasting. Ideally, you should wait at least 48 hours for any work. After this, you can install baseboards and return sockets and switches. But the work on installing air conditioners, suspended ceilings and, in principle, living in a room is possible a week after working with non-woven wallpaper. Because changes in humidity and temperature can lengthen the drying process and the coating will fall off the walls.
Finishing and decor
Decorating a room with vinyl wallpaper is not problematic. Ceiling and floor skirting boards do not apply to a large layer of wallpaper, as is the case with paper canvases. Due to the fact that the non-woven fabric does not stretch, the margin under the baseboard is minimal.
In some interior design styles, the use of borders is appropriate. This half-forgotten decoration from the times of our grandmothers is gaining a new round of popularity in modern world. Nowadays, borders are made in all kinds of patterns and sizes. You can stick paper borders on top of vinyl wallpaper. They will repeat the texture and fit well even on the same type of glue, only in a lower concentration.
Takes ~4 minutes to read
Save
Save
Non-woven wallpaper at one time revolutionized the idea of renovation. They have a lot of advantages and are easier to stick. With certain knowledge, the entire process can be done with your own hands, achieving good result, you just need to understand the technology. In this article we will look at how to properly glue wallpaper and prepare walls for quality repairs.
The technology for gluing non-woven fabrics differs little from paper and vinyl types wallpaper The basis for gluing them is similar; it requires preparation, accuracy and patience. At the same time, you need to know the nuances of working with them.
Save
Required Tools
For high-quality gluing you will need a large amount auxiliary tools. You can do without them, but using them will make the gluing process easier and faster.
Required tools:
- Roulette.
- Pencil.
- Roller or brush.
- Knife or scissors.
- Glue container.
Save
When purchasing tools, you should know that a roller is more convenient than a brush, and a utility knife is preferable to scissors. In the first case, the speed of applying the glue will be higher, and it will lay down in a more uniform layer. The knife will allow you to cut the canvas with an even cut without jagged edges.
Additional tools:
- Ladder.
- Long ruler.
- Container with water.
- Building level.
- Metal spatula of small width.
- A brush with soft bristles for smoothing wallpaper.
- Tray and mesh for removing excess glue from the roller.
- Foam sponge and/or cotton towel.
- Rubber or plastic spatula with a soft tip.
You can do without these items, but they will speed up the gluing process and allow you to achieve more High Quality works At the same time, it is difficult to get a good result on unprepared walls.
Marking and preparing walls
Save
The structure of such wallpaper allows it to be used on walls that are not perfectly flat. At the same time, there should be no obvious bulges, pits or cracks on the surface. Their elimination is included in the first stage of preparation.
It is important not to forget that they cannot be glued to surfaces covered with oil paint. You need to first sand the walls a little with medium-caliber sandpaper.
Acrylic paints do not interfere with gluing non-woven wallpaper. This type of painting does not need to be sanded; if the walls were covered with other wallpaper, then they simply need to be removed. It is also necessary to clean the surface from dirt, cobwebs or dust accumulations.
It is worth remembering that gluing non-woven fabrics requires a relatively uniform surface color. They are slightly translucent, so if there was a contrasting color pattern on the walls, it will be noticeable. The final stage in preparation - applying a primer, although many do without this procedure. After this, it is recommended to switch to marking the walls using a level.
Save
You need to draw a vertical line at a distance of a meter from the corner. You can use a simple plumb line or a building level, and then draw a line. A distance of 1 meter is needed for a wide format of canvases; using narrower ones requires a different distance. You also need to take into account the future gluing process: the width includes a few cm for adjustment. If the wallpaper is end-to-end, then it is necessary to draw a vertical line taking into account these extra centimeters.
Save
After preparing the walls, it is recommended to cut strips for the entire room. This rule is only relevant for experienced people, but even they try not to cut all the rolls when gluing canvases with large patterns that require adjustment in height.
When gluing non-woven fabrics with your own hands, it is important to remember that the height of the room can be unstable throughout the room. Even if you choose a format that does not require adjustment, you should not cut everything to the same length. You must first measure the height of the walls in different parts rooms with a pitch of no more than 50 cm.
When slicing, canvases with large patterns deserve special attention. The larger the step, the higher the probability of error. For those who are gluing for the first time, it is recommended that if there is a large pattern, cut off each strip after placing the previous canvas on the wall. This will allow you to adjust the design without the risk of damaging the wallpaper.
The least problematic in terms of cutting are those with no clear pattern. After checking the height of the room, you can immediately cut them, marking their order with a pencil. If the height error is 1-2 cm and you plan to use a wide ceiling plinth, then length measurements are not required, this difference will subsequently close.
Save
Non-woven-based roll materials are a heavy type of adhesive wall coverings. Many who do their own repairs for the first time make a mistake when choosing glue. For these types of roll coverings, a special glue is required; it says on it that it is intended for non-woven types of wallpaper. It can be from different manufacturers, but the purpose must be the above.
Gluing such canvases to paste will not work - they will begin to “slide” from the walls. The only exception is fiberboard: if you glue it to this material, then a mixture of PVA and paste is quite suitable.
You can properly dilute purchased glue according to the instructions. Granular glue from any manufacturer has instructions for dilution. Usually you need to pour the powder into a container of water in a thin stream, stirring the mixture vigorously. You should not dilute a large portion in advance - if left standing for a long time, the glue loses its adhesive characteristics, which can lead to the canvases coming away from the walls. Even the most good glue It is worth starting a new one if the work is not completed in one day. As a last resort, leftover mixture should be stored in the refrigerator and used as soon as possible.
How to stick it yourself? The procedure for pasting walls
Save
Often a person wants to glue wallpaper himself, after briefly watching a video of this process. Even with quality training You can stick them on incorrectly. This is possible if you ignore or do not know the basics of the arrangement of paintings.
It is also always worth studying the information on the rolls themselves - sometimes they contain additional individual information about working with them. For example, it is possible to specify a duplicate application of glue on both the wallpaper and the wall. In most cases, it is necessary to apply it only to the surface to be pasted, leaving the canvas dry.
How to glue: technology
The whole process is divided into 3 stages:
- Applying glue.
- Sticking.
- Removing wrinkles and bubbles.
Save
Before gluing, you need to study the label on the package. Unless otherwise indicated on it, the adhesive is applied only to the wall. This must be done with a small margin of bandwidth. The glue is applied separately for each piece of fabric.
After this, they begin to glue the wallpaper from above, trying not to touch the wall with the bottom of the canvas. If you are doing a DIY repair for the first time, it is better to call an assistant. It will hold the bottom of the strip, preventing it from sticking to the wall ahead of time.
For a good result, you need to smooth the wallpaper when gluing it from top to bottom, trying to avoid folds and air bubbles. If bubbles remain, then you need to take rubber spatula or dry towel and, without strong pressure, direct them to the nearest edge of the canvas. You can also remove minor wrinkles by gently smoothing them out. Large creases require careful detachment of the strip from the wall and re-gluing. This must be done immediately.
A narrow metal spatula may be required to detach the canvas from the wall to remove folds or to coat the edge of the wallpaper with glue if there is insufficient or uneven amount of glue. If glue gets on the front side, it is recommended to immediately remove it with a damp sponge. Only after this can air bubbles be smoothed out. Then you can proceed to applying glue for the next piece of canvas and subsequent work.
Knowledge general technology Pasting this type of wallpaper does not always save you from mistakes. Often the work turns out to be of poor quality due to a poorly applied first strip. Mistakes are also possible when gluing the ceiling.
First stripe sticker
From correct location the first panel depends on the further result. Do not neglect the level or plumb line at least before gluing the first piece. It is recommended to start from the window or from the corner closest to it. Many people use the window as a vertical line, but this does not guarantee that deviations will not be visible in the future.
Save
The presence of a verified vertical of the first strip does not guarantee the preservation of evenness when gluing with an overlap. In such cases, it is necessary to regularly check the new vertical and mark it on the wall. Experts recommend doing this for each new strip, but with a good eye, you can pass the strips through one.
The basics of end-to-end wallpaper do not require such nuances for each piece. You need to check the vertical of the first strip and then just continue to place the subsequent ones evenly. But neither this option nor the subsequent one will allow you to avoid adjusting the pattern if it is clearly present.
Adjustment of canvases and photo wallpapers on this basis
Save
Ideally, any pattern needs to be adjusted, since this type of wallpaper has a relief, it also needs to be combined to achieve maximum effect uniformity of wall coverings. This type does not require a significant increase in material consumption, while a large pattern may force you to buy an extra roll.
On modern wallpaper Manufacturers indicate the size of the fitting step for matching the pattern. The label indicates the number of centimeters placed between the repeating elements of the pattern. To align the pattern, you need to move the blade up or down to cut the next strip.
Photo wallpapers are considered more complex look pasting. It doesn’t matter what kind of base they have - paper or non-woven, the gluing process itself requires at least minimal experience. They require pattern alignment accuracy of literally up to 1 mm, which is difficult to do when working with roll wall coverings for the first time. It is more correct and logical to wallpaper the room first simple wallpaper by giving yourself a workout. It is better to start gluing photo wallpapers already having a small amount of skills.
Ceiling pasting
If you decide to hang wallpaper on the ceiling with your own hands using rolled non-woven materials, then you need to remember about the correct joining and placement of the canvases. There are only two rules:
- The joints are parallel to the sunlight.
- The canvases are arranged without overlap.
Such requirements have a logical basis - the overlap is difficult to properly cut from the ceiling, and if it is not removed, it will be very noticeable. The same applies to the location of the canvases - wallpaper should not be pasted perpendicular to the window. Otherwise, pasting the ceiling differs little from the walls.
Save
Final works
After finishing work, it is important to ensure proper drying - the wallpaper should dry for 24 hours at closed windows and doors. Ignoring this requirement may lead to the appearance of bubbles, folds and other deformation of the canvas.
If you set yourself a goal, then it’s not difficult to find out how to hang such wallpaper with your own hands. Each person can do this themselves. You need to follow the recommendations and be careful in your work. Then the result will be worthy even without the involvement of highly paid specialists.
Video: proper gluing of non-woven wallpaper with your own hands
The guide will save you from many common mistakes and will tell you how to properly glue non-woven wallpaper: about gluing corners, marking walls, cutting wallpaper and gluing technology.
Non-woven wallpaper can be with or without a pattern. The second type will require additional painting. Such wallpapers mask wall imperfections well and are the most simple material for finishing.
Preliminary preparation of the room before pasting
On preliminary stage It is important to correctly calculate the required number of rolls. To do this, you need to measure the width and height on each side of the room. When counting required quantity rolls, it is important to add a few centimeters to the length of the required fabric.
Note! You should buy wallpaper from only one batch number. This number is usually indicated on the roll label. Only rolls from the same batch number will definitely have the same shade and pattern texture.
Before wallpapering, the walls need to be leveled; wallpaper wider than 50 cm is very sensitive to unevenness. Preliminary preparation of the room before wallpapering consists of: This fact is especially important for wide wallpaper, which are extremely intolerant of irregularities, especially at the joints.
Sockets and switches must be removed and the wires insulated. Treat the walls with primer and be sure to dry them. Protect the remaining furniture in the room, the floor and unused areas of space with plastic film.
Preparing corners for pasting
In the corners the panels are glued overlapping, this way their unevenness is hidden This process should be done at the stage of wall putty. In the corners you need to put special plastic corners, which will be attached to the walls with putty. After the structure has dried, you can begin gluing. When gluing a corner, the wall is treated with glue, including the corner. The panel is glued overlapping; experts do not recommend gluing the whole panel into a corner. Because the angles, as a rule, are far from ideal and the formation of defects is possible. overlap on next wall should be small.
Required tools and materials:
- To roll the edge you will need a roller
- polyethylene film
- plastic spatula
- for glue bucket and roller
- soft bristle brush
- pencil and tape measure
- plumb line
- building level
- glue designed specifically for non-woven wallpaper
The process of pasting walls with your own hands
Stage No. 1. Wall marking
When working with non-woven wallpaper, marking is necessary, since the sticker goes end-to-end It is recommended to start marking from scratch. Wallpaper on this basis has an excellent edge; the butt gluing method is used. Overlapping panels are glued in the corners. This is done in order to enable good further processing. If the width of the roll is 1.06 meters, then a meter must be set aside on both sides of the corner.
Initially, a vertical line is drawn with a pencil using a level or plumb line. From the drawn line, the tape measure marks 1.06 meters. This is how you need to outline all the walls that are being prepared for pasting.
Stage No. 2. Preparing the site and cutting wallpaper
Make sure that the pattern fits together; flaws will be very noticeable with large ornaments After marking the walls, you need to spread a clean sheet on the floor. plastic film. It will be needed as a place for rolling out rolls. This is done by placing the wallpaper face down. When cutting the panel, it is important to take into account the pattern on the wallpaper.
If there is no drawing, then use a tape measure to measure the place where the first piece will be glued. Another ten centimeters are added. The roll is folded over the rolled part so that the edges match. First, the bend is drawn by hand, and then it is cut with a knife. Prepare wallpaper for covering the entire room.
The prepared panels are rolled into loose rolls, face down. Non-woven wallpaper is tolerant of such manipulations.
Stage No. 3. Glue preparation
When diluting the glue, do not allow lumps to appear, as they negatively affect the quality of the sticker. Wallpaper glue should be purchased specifically for non-woven wallpaper. It should be diluted according to the instructions indicated on the package. Typically, glue is diluted using this technology: water is poured into a bucket, glue is poured into it in a thin stream, and it is constantly stirred. There should be no lumps, otherwise they will interfere with quality pasting. For the glue to become usable, you need to let it sit for a while. It will be useful to insert a special plastic mesh into the bucket, which will help remove excess glue.
If you already had non-woven wallpaper,
Stage No. 4. Applying glue and wallpapering walls
Dip the roller in a bucket of glue, move it along the mesh, and then apply glue to the wall. Apply glue only to cover one panel. The panel should be glued on top. The canvas is taken by the edge and applied to the wall. Gradually lower the roll down, smoothing the wallpaper from the middle to the edges with a special brush or roller. You can also use a plastic spatula, but be careful not to damage the wallpaper.
Note! The wallpaper should be pressed tightly against the wall, there should be no bubbles or folds inside.
Wallpaper always starts from the top, moving downwards, from the middle to the edges of the panel. When several sheets have already been pasted, each subsequent seam of wallpaper will need to be additionally rolled with a roller. The piece of wallpaper that remains below should be carefully cut off. It is recommended to do this after the wallpaper has dried. By the way, consider that the baseboard completely covers the area where the wallpaper was cut.
It is important! In many construction stores Today we sell wallpaper that is a meter wide, which is non-standard for us. But meter width has its advantages because it simplifies the pasting process.
