What are plasterboard partitions for zoning space in a room and how do they differ from other structures?

Since its introduction, drywall has gained incredible popularity among builders. One of the reasons was the ability to create plasterboard partitions in the room that were unique in construction and design from this material. If you are thinking about something similar, but cannot choose or come up with the shape and finish of the future architectural element, I suggest doing it together.

This article will focus on the designs of zoning partitions, their functional purpose and finishing options.

Design features of gypsum plasterboard partitions

I will not go into details of the construction of plasterboard structures - you can read about this in special thematic articles. Let's just see what they are, and what ideas and technical tasks help us implement them.

Being a hollow structure consisting of a frame lined on all sides with gypsum plasterboard sheets, the partition in the room is made of plasterboard may hide various communications:

And if you make the frame double, leaving enough space between the rows of racks, then you can build air ducts into the wall, lighting, aquariums and even.

With brick, foam blocks and other similar materials, such a number with hidden pipes and wires will not work - you will have to make grooves and then seal them with mortar.

In addition, gypsum plasterboard partitions have many other advantages:

simplicity and speed of construction with your own hands with a minimum of dirty work;
light weight and, as a result, insignificant load on the floor;
the ability to give it any shape due to the flexibility of the material.

Designs intended for zoning space can be divided into two types: solid and decorative.

Types of solid partitions

You can divide a room in different ways. If two zones need to be completely isolated from each other, a continuous partition is erected. Essentially, it is a wall between two different rooms.

If a separate entrance can be made to each of the rooms, the wall is made blank, without openings, from floor to ceiling. In cases where one of the rooms is left without a window, to illuminate it with natural light, window-like openings filled with translucent material are left in the partition.

If the layout allows you to make only two adjacent rooms out of one large one, the wall blocking it is made with a through opening. Its size and shape can be very different, as well as the shape of the partition itself.

But quite often a door is needed between adjacent rooms. In this case, when erecting the partition, they begin to “dance” from the racks for door frame. These racks are either immediately made of wood, or metallic profile reinforced with wooden blocks.

If sliding doors are planned, the frame is reinforced transversely at the height of the tire mounting.

Very interesting option– cassette sliding doors that move not along the wall, but inside it. And it is drywall and metal carcass make it easy to create a kind of pencil case in which the door panels will be hidden.

Solid partitions with a door allow you to make more comfortable life families with a child in one-room apartment or studios, allocating personal space to each generation. They also isolate the kitchen with its aromas from the living spaces.

And in general there are many reasons for their installation. And drywall in such cases is an ideal material.

Types of decorative partitions

When you don’t want to split one spacious room into a couple of small ones, but you want to visually divide it into zones for different purposes, a plasterboard partition in the room will again come to the rescue. But it’s no longer solid, but decorative.

It is not intended to completely isolate them, but clearly defines the boundaries of each zone.

Options constructive solutions a bunch of:

A semi-partition from floor to ceiling adjacent to the wall. Or two similar structures “growing” from opposite walls;

A partition in the center of the room without adjoining the walls;

Structures that do not reach the ceiling of different heights;

Arches, semi-arches, etc.

There are also interior elements that are completely unique in architecture and design, made from this material. They can have an intricate shape, many niches and through openings, and go into a multi-tiered ceiling made of the same plasterboard.

But even decorative structures can not only decorate the interior, but also perform very specific functions.

Functional purpose

I won’t waste extra words on explanations – the photographs will tell everything better than I can real interiors and design projects.

You have already seen that even a closet can be built into such a design. The main thing is to think through and calculate everything in advance, not forgetting to strengthen the frame in in the right places, because on its own Drywall is a fragile material. It is not able to withstand heavy loads. And this is his only drawback.

Finishing and decoration options

A decorative partition made of plasterboard for zoning a room is also good because, in addition to any shape, it can be given absolutely any look and color, using almost the entire range finishing materials.

It can be:

The surface must be prepared for painting and wallpaper: seal all joints, putty and sand perfectly.

But for the following types of decorative finishing, the instructions allow you to get by only by sealing the joints and priming:

The only requirement is to use moisture-resistant gypsum board sheets to create partitions if you plan to finish them using the “wet” method - plastering or tiling with glue. And, of course, if they are built in such wet areas like a bathroom.

The price of GKLV is slightly higher than the cost of conventional drywall. But you don’t have to worry about the reliability of this decorative element of the interior and the fact that it will retain its shape and appearance.

Conclusion

As you can see, frame-sheathing partitions made of plasterboard can be very different both in design and shape, as well as in purpose and decor. Yes, their main role is to zone space, but there are many solutions to this problem. And the best part is: each of us can find another, our own, completely different solution.

The video in this article or your own imagination may suggest it. And if you already have ideas or even completed projects, it would be very interesting to see them. You can show, tell and discuss the topic in the comments.

December 10, 2016

If you want to express gratitude, add a clarification or objection, or ask the author something - add a comment or say thank you!

Sliding partitions for zoning space in a room are one of the options for transforming the interior by creating separate zones. Modern designs are becoming more refined and perfect. This applies to the materials for their manufacture, and to the fittings responsible for the smooth running, and, in fact, to the shape and finish of the canvases themselves. Light and airy sliding systems can not only create clear boundaries, but also dissolve them in the living space.

Sliding partitions for zoning space in a room: a convenient divider

Mobile sliding partitions can create a new or change an existing layout of a house, apartment or separate room. Moreover, such a design trick is equally suitable for both small apartments, and for housing of significant dimensions. Any specific rules for use various options designs do not exist, but their use in design is always fresh, non-trivial, beautiful and functional.

Most often, additional isolated areas are created using room sliding partitions. They can be used when you need to divide a large, uncomfortable room into compact parts, hide the entrance area, protect it from view sleeping area or work area kitchens, and indoors large area they can be implemented as movable walls. But whatever function they perform, they share a number of important advantages:

the ability to install structures not only at the renovation stage, but also in the renovated room;

ease of installation and, if necessary, the ability to quickly reinstall partitions;
saving space in the room;
aesthetic and presentable appearance;
unlimited decorative possibilities;
variety of materials, shapes, sliding mechanisms, styles used;
installation of sliding partitions does not require approval from regulatory authorities or registration with the BTI;
installation does not require special skills and can be done independently.

Example using a sliding partition

Helpful advice! When planning to install a sliding partition in a room, consult with a designer so that instead of a stylish divider, you don’t just get an obstacle to light and movement.

The only negative characteristic of all types of sliding room partitions is the lack of soundproofing function. In view of this, their role is reduced more to the visual delimitation of space.

The importance of sliding partitions for zoning space

There are many circumstances when it is necessary to divide a living space into small separate zones. This could be a small area of the apartment in which he lives. big family, where everyone wants to have a cozy personal space. Or do you need to visually play up the narrow and long room. Or it may be that the room is too large and needs to be divided into functional areas. For all these cases, you can use sliding partitions in the room.

Installation of a sliding partition between the kitchen and living room

If, after redevelopment, the kitchen and living room have turned into a single whole, one of the options for skillful division would be to install a sliding partition between these two rooms. When closed, the partition will hide the cooking process and temporary clutter on work surfaces, in open position- the kitchen will turn into a spacious dining room, where everything is at hand and you can quickly deal with serving.

As sliding system in a combined kitchen-living room there can be partitions with a roller mechanism - they have a fairly easy movement and are able to withstand considerable load in the form of numerous openings/closings. The absence of a guide rail from below in such a system preserves the integrity of the floor covering, which is welcome, as it is supported overall design premises.

Accordion partitions that use a combination of hinged and sliding opening methods will look original. Considering the small thickness of the canvases, when closed, such partitions do not take up much usable space. Often the line of demarcation kitchen area decorated with a partition, the design of which is called cassette. It should be noted that such a model should be envisaged precisely at the stage of repair work, since it will be necessary to arrange a special niche for the movement of the canvas.

If you use transparent glass or plastic as the material for the partition fabric, the space of the combined rooms will turn out to be visually open and large even with closed position. The filling of the sliding system should be selected based on style general interior apartments. For modern trends Characteristic combinations of aluminum and glass, for classic solutions wood, bamboo and other natural materials are suitable.

Sliding partitions for room zoning: multiplication by division

The main inconvenience of Khrushchev apartments is the simple layout and small area rooms. And having a comfortable personal space is one of the main human needs. The basis of any redevelopment decision is the competent division of the apartment into functional zones. The use of sliding partitions for zoning will help avoid global reconstruction.

Related article:

How cork panels for walls are made. The main types of cork coverings, their pros and cons. Tips for installing cork panels. Cork wallpaper in the interior: photos and ideas.

In a well planned cozy interior First of all, there must be a place where each family member will feel calm and comfortable. And don’t be upset if you don’t have a free separate room for this in your house. You can organize your personal space without it by arranging a separate office or a quiet sleeping place, separated from the general space by a light matte sliding partition.

The cause of discomfort does not always lie in tiny square meters. If the room is spacious, and a family of four lives in it, separating individual zones using sliding partitions in the room will also be appropriate. However, when dividing one room into two or more, you always have to sacrifice a window. In this regard, you should carefully consider which part of the secluded corner will be without a window.

Helpful advice! You can visually increase the height of the premises by installing a sliding structure from floor to ceiling.

Zoning works great in children's rooms, when you need to allocate separate places for study and entertainment. And if there are two children in a family, zoning will help create a personal space for each of them in one room. Numerous photographic examples of delimiting space using sliding partitions in children’s rooms will become a kind of guideline for creating comfortable interior for your little household members.

Design of room partitions: photos of impeccable solutions

There are dozens of options for using partitions in a room to delimit space. If you are not entirely confident in your design abilities, use a photo of the partitions in the room as a sample. Numerous options good ideas the use of structures will become an example for creating a unique and most comfortable interior.

Helpful advice! When constructing openings for installing interior sliding partitions, the value of vertical and horizontal deviation should not exceed 3 mm.

It is important when using sliding systems decorative finishing openings. Borrow ready-made examples compliance of the decoration of the opening with the existing style direction. If there is a modern minimalist style or a high-tech line, then, in most cases, the opening should be left without a frame and decorated identically to the walls. For such cases, the installation of the guides is carried out flush with the ceiling surface.

Traditional stylistic trends are characterized by the use in the design of the opening of the same materials from which the sliding partitions are made. You should order a ready-made kit for decorating the opening along with the sliding system. Photos posted online illustrate the use of a corresponding decorative cornice to disguise the mechanisms of sliding systems.

Available photos of glass sliding doors and partitions will help you decide in which cases you should choose matte, transparent or stained glass. Examples of designer-appropriate use of sliding partition models to transform a room will help you choose an option that will not overload the interior with an inappropriate design.

Materials used for sliding partitions in the room

Modern sliding structures for zoning have a variety of designs, a wide range of materials used and a wide selection of designs and patterns of canvases. The frame for the canvases is made of wooden beams, metal and plastic profiles. For canvases they use plastic, different kinds tempered glass, as well as numerous options from their combinations.

It is worth noting that the glass used in partitions may have big choice ornaments and designs. Glass filling can be done by artistic matting using sandblasting technology or laser engraving. Very often a combination of frosted and transparent glass or placement of photo printing between two glass surfaces is used.

The partitions are unique, specially designed by designers for a specific room style. They can use the most elegant materials, original technologies and curved configurations. Exquisite models using stained glass amaze the imagination with complex patterns and frames made of forged metal and bent wood.

Helpful advice! When installing a sliding partition in a children's room, make sure that it is made of safe materials.

For environmentalists pure materials Manufacturers offer partition options with maximum use of wood, as well as bamboo, leather or painted textiles. As for plastic, various types of polymers and plexiglass are used for sliding partitions. Such designs have a light weight and are ideal for decorating borders in small rooms.

Glass sliding doors and partitions: product prices

Production sliding structures Many domestic and foreign manufacturing companies are engaged in this. Assembly is carried out on behalf of the client-customer, who has previously familiarized himself with the product catalog in in electronic format. Before you buy sliding partitions for zoning a room, you need to come to a showroom or company representative office to see the model in reality.

The cost of sliding partitions and doors is determined taking into account the material for the door leaf, the mechanism used and the installation of the structure. The price is also influenced by the reputation of the manufacturer and the version in which the models will be produced: standard or individual. Please note that the order completion time can be up to 3-4 weeks if the design domestic manufacturer, and up to six months if the model is imported.

Installation of sliding doors can be carried out both at the stage of renovation work and in an already renovated room

The price of a sliding partition, model Diana 2, with two panels of frosted glass with diamond engraving measuring 0.95 x 2.1 m is 46,500 rubles. The design uses a hanging mechanism. The model is complete decorative overlay and is ready for installation without purchase additional elements. The product comes with a 12 month warranty. Estimated production period is 4 weeks.

The Waterfall series will cost from 43,600 rubles. for a complete set. Doors can be attached to both the ceiling and the wall. The manufacturer provides a choice of about 200 profile shade options, up to 10 types of glass, 15 opening methods, and about two dozen types of fittings. The design uses strained glass 8 mm thick. Maximum height and the width of the canvases are 3.2 and 1.5 m, respectively.

Installation sliding type does not require approval from regulatory authorities and registration with the BTI

To make it convenient for the buyer to navigate the size and weight of glass sliding doors and partitions, many companies post special calculators on their websites to calculate the size of the canvas and the weight of glass required for it. This information will be useful when choosing sliding mechanism. Prices in online stores are for informational purposes only and must be confirmed with the company manager when ordering.

Do-it-yourself assembly of sliding partitions

There are many design options for sliding systems made independently. You can make a small, lightweight sliding partition with your own hands from door leaf, the design of which implies such an application. To do this, instead of a swinging device in the form of loops or canopies, the canvas is equipped with a roller mechanism. If the height of the door is not enough, you can assemble a lintel of the appropriate width from profiles.

Guides and accessories can be purchased at any hardware store. When choosing a roller mechanism, you should give preference to steel rollers, since rubber-coated analogues quickly fail. You can use both built-in and mounted mechanisms. The latter option requires extreme care during installation, since it is a visible element.

One of the options handmade partitions - assembly. Its design consists of several frames and a number of thin panels connected by hinges. To make the frame, you can use a PVC profile, and any suitable type of sheet plastic or vertical slats from the same material.

Adding some zest to the interior, you can make the frame of the screen from wood, and use thick textiles or rattan weaving for filling. The partitions look unusual and stylish; they are filled with fabrics with unusual prints. By showing your imagination, you can make your own unique model that will highlight your taste.

To zone a room with a large area, two types of partitions were used - and a curtain-partition made of fabric

Example self-made A sliding system can be doors made on the principle of partitions from a sliding wardrobe. Work can be kept to a minimum by ordering ready-made canvases from the workshop. In this case, all that remains is to attach the guides yourself and hang the blades with a roller mechanism on them. For those who have the time and certain skills, you can assemble the design of the canvases entirely on your own.

By using sliding partitions to delimit space in a room, you can achieve interior transformation with minimal time and financial investment.

Recently, partitions are increasingly being used to zone rooms. They allow you to divide the space and create a separate area, for example, for work or relaxation. This approach to creating a comfortable and functional interior is also appropriate for small apartments, and for large rooms.

Partitions are made from different materials, are colored in different colour and can have an original, non-standard design - the designer can fully realize any of his ideas and at the same time take into account all the wishes of the owners of the house.

Types of room partitions

The design for zoning can be transparent or solid, equipped with hollow niches and cutouts, or be solid. Partitions also vary in height, shape and installation features.

The main types of partitions are:

mobile (frame). Suitable for small and multifunctional spaces. They are not attached to the floor, ceiling or wall, so they can be moved from time to time to change the interior. The design has a wide base or frame on which the remaining parts and elements are supported;
built-in (frameless). This type is for “durable” zoning. They cannot be moved from place to place;
sliding Installed in rooms where there is often a need to free up space. They “work” like wardrobe doors, they come in single and double versions, and are equipped with wheels and railing mechanisms;

A partition is not necessarily a flat screen. You can zone a room using a shelving unit, a column, a bar counter and other pieces of furniture. Be creative and don’t be afraid to experiment!

Features and advantages of partitions

Among the advantages of partitions for zoning are the following:

with the help of the design, a room where several people live can be divided into two or more parts, creating a separate, isolated space for each;
each zone can be designed in a certain style, and the differences will not be noticeable;v
the design allows you to correct an unsuccessful layout;
a mirror on the partition can visually expand the space, which is important for small rooms.

Partition – perfect option for modern studio apartments. When installing it, you get a separate kitchen and room, while the financial costs of installation are minimal, and using decorative elements, the interior can be made brighter and more original - often the design becomes the central accent of the room.

Decorating the partition

Perhaps this is the most interesting stage, where you can fully demonstrate your imagination and design skills. If the design has shelves, then you can put books, photo frames, small vases, a collection of figurines on them - everything that can give the interior comfort. A flat structure can be decorated using various finishing materials, for example, wallpaper with a pattern or photo poster, decorative textured paint imitating stone - there are many options! Designs from natural wood themselves look stylish and noble, they don’t really need additional decor, but you can order from us wooden partition, decorated with exquisite carvings.

Most apartments and houses consist of several cramped rooms, which is why some residents decide to share rooms. As a result, one large room becomes multifunctional: there can be a kitchen, a dining room, an office, a bedroom, and a living room at the same time. Such a layout must be correctly executed, while Special attention paid to zoning. Most often, the room is zoned with partitions, which can be represented by the most different types designs.

Space division

In most cases, zoning is carried out in the living room, where it is necessary to visually divide the room into two zones, one of which will be allocated for relaxation and receiving guests, and the second is intended for organizing a bedroom or workplace. In addition, this is how zoning is carried out in children's rooms, where there should be a place for games, relaxation and study. Zoning is also popular in the kitchen, where there should be areas for cooking and eating.

There are only four main reasons for zoning:

Dividing one room into several zones with different functional loads. For example, a combination of a living room and a children's room.
Separation of personal area from work area.
Changing space depending on the time of day. This includes the proportional allocation of individual zones. For example, in the evening, an ordinary closet can be transformed into a folding bed.
Creating an optical illusion to visually enhance the interior. For example, if necessary, a small room can be visually expanded, and a large one can be made smaller.

In modern studio apartments, using a variety of methods and techniques, one large area is divided into several functional zones.

Partitions in the interior

To solve a number of the above problems, many decide to radically change the room, but the construction of new walls requires large expenses, as well as global repair work, and not very permanent walls are practical. There is another way out - a quick, simple and at the same time original transformation of space using partitions. This is a Swedish idea that allows you to effectively manage the entire area in a house or apartment.

In this way, you can solve all the problems associated with dividing a room into several zones. At the same time, every centimeter will be useful and will be actively used. You can zoning the space in a room in the most different ways, but the most popular types are:

arch partitions;
furniture;
decorative designs;
textile;
lighting.

If we talk about any clear proportions and instructions, then there are none. But when planning to carry out zoning, you should consider several important points:

If it is necessary to allocate a children's corner, study or greenhouse in the living room, a proportion of 1:2 or 1:3 will be sufficient.
Most of the room should be planned where there is a window.
To carry out separation in the living room and bedroom, a partition is installed in the middle. It can be made at 2/3 of the height or the entire height, and can also cover only half of the passage.
An arched ceiling can accentuate the boundaries of zones.

No less popular are false walls, which can be made in the most different options. At the same time, they will be functional and decorative.

Partitions made of plasterboard or plywood

The most labor-intensive, but at the same time original version is the installation of a partition made of plasterboard or plywood. Plasterboard construction It is built on the basis of a metal or wooden frame, attached to the floor, wall, ceiling. The partition does not have to be smooth and even. With a little imagination, you can plan in it:

Niches for storing things.
Niche for an aquarium
Place for a false fireplace.

A built-in wardrobe will also look good. It is necessary to choose a design depending on the tasks and the general style of the room.

Advantages:

the ability to create a figured partition;
greater stability with reliable fastening;
unlimited number of finishing options;
electrical supply inside.

Opting for plasterboard partitions, it should be remembered that they will be static. Oversized design can significantly reduce space and natural light.

An original addition to any design will be lighting that is mounted in the frame - these can be spotlights or LED strip.

Textile

This method was also used by our grandmothers, who used curtains to separate a secluded place or bedroom in small house. In modern interiors, zoning with curtains is used; with their help, you can quickly and cheaply separate one zone from another. A boudoir, dressing room or bed can be hidden behind a thick or light fabric.

Curtains can be secured using a curtain rod, along which it will be easy to move. Also included in this category are portable screens, which are a canvas attached to a frame. If necessary, this design can be easily assembled and hidden, as it is mobile. When choosing a material, you should take into account the style and primary colors of the room’s interior. If we're talking about about a light and transparent partition, then you need to choose from:

organza;
veils;
tulle.

The classic style involves the use of draperies; in this case, the curtains are picked up with tassels.

Decorative designs

Such partitions will divide rooms, rather, conditionally, since their main task is to mark the boundaries of both zones, and not to hide the contents behind them. The design of decorative partitions can include the most different elements, which will harmoniously fit into the interior of the room. Moreover, such partitions can be not only decorative, but also functional. For example, sometimes a tabletop is built into the partition, which can be used for eating, working or creating.

It should be noted that the design should be airy, light and transparent, so that the room will not visually shrink, but rather expand. It would be appropriate to use:

glass;
wood;
metal;
mirrors;
plywood;
drywall;
textiles

Glass can be frosted, completely transparent, patterned, colored, or even corrugated. Interior lighting, glass beads and beads will look interesting. With a shelving unit, for example, you can decorate any room without making drastic changes. The fastening is selected individually depending on the design.

False walls

It's not really the usual way dividing a room, which is very often used by designers in modern interior. In this extraordinary way, a bedroom and a living room, a kitchen and a dining room, or areas of two children in a common nursery can be separated. The main material for creating false walls is plasterboard. Since this material is practical and plastic, a variety of partitions can be made from it:

curly;
openwork;
with niches for an aquarium, fireplace, TV or storage;
equipped with shelves;
in the shape of a ladder;
supplemented with inserts of other materials.

Also, false walls are divided into mobile and fixed (stationary). When planning the interior of a studio apartment, this division into zones will be more appropriate.

Other types of partitions

A variety of objects, such as furniture, can serve as partitions. If there is no available funds, then you can separate with ordinary furniture: a closet, a chest of drawers, a bookcase, and even a sofa with a high back. In this case, the items will perform several functions simultaneously, but the main one remains their direct purpose.
Sliding doors and arched ceilings can also solve the zoning problem. In this case, it is enough to choose the right material and shape of the structure so that the partition not only fits harmoniously into existing interior, but also performed other functions.
Lighting, which can act individually or complement almost every design, will also add originality. A wide variety of lamps, LEDs, lanterns and spotlights can be selected for lighting.
Popular eco-design involves the use of natural materials, so in such apartments “living walls” can act as partitions. It would be appropriate to use high indoor plants or a rack on which flowers are placed.

Particular attention should be paid to the double-sided cabinet. This design can be ordered individually. In the kitchen, unfortunately, it will be completely inappropriate.

So, with the help of partitions you can large room divided into several zones, each of which will have its own purpose. You can use both simple and easy options, and complex designs. If you want to carry out redevelopment, you should take into account the preferences of all residents.

Photo

We will send the material to you by e-mail

Partitions may have the following design features:

rail mechanisms are mounted on the floor and sliding-type elements are installed on them;
non-threshold devices operate due to the upper suspension.

When creating screens, materials such as plastic, wood, metal and laminated chipboard. Products can be framed, modular or frameless.

Related article:

Can be matched to any interior style suitable option partitions for zoning space in the room. Photos show original and stylish solutions.In addition, partitions allow you to disguise wires in structures, as well as build in aquariums or fireplaces.High-quality textiles will help zone the space. It will look elegant in any room. Tiebacks and brushes are used as additional decoration.

Helpful information! You can divide the space using columns. They are perfect for classic interiors, and can also complement modern design.

How to use in different rooms

Certain options are used for rooms for different purposes.

Living room

An excellent solution for zoning a living room will be decorative partitions. For such premises, mobile structures are used that unfold and fold when needed. Suitable materials include plexiglass, plastic and glass.

Small island walls are used for zoning. In the partition box you can place all sorts of things, books and souvenirs.

The original solution is considered to be a mobile version, representing a screen with sections that are covered with fabric.You can create elements from frames that are attached with hanging hinges. The advantage of such partitions is mobility.

Sliding partitions, which can be used as doors or cabinets, are characterized by ergonomics.Transforming and sliding screens are considered the best option.

Dining room

For the dining room, you can buy wooden models of partitions to zone the space in the room. Wood products go well with wallpaper.As an option, various racks are used that represent a stepped partition.

Vases, souvenirs and books are placed on the shelves. Inside such structures you can put an aquarium, a TV or even a fireplace. In this case, there can be a recreation area on one side and a dining room on the other.

Children's

In the nursery there are many small things that need to be placed somewhere. To make it convenient for your child to get toys out, you should use a partition in the form of a box.

Additional shelves will help you place all the necessary things and toys. In the future, the partition can be used as a separator for recreation and study areas.

Mobile partitions that represent racks or structures on wheels are functional. Mobile cabinets look very unusual.

Bedroom

Using glass partitions to zone the functional space in the room, you can create a separate place for work or study. In this case, you can separate the sleeping area and the area with the work desk.

You can also divide the recreation area and. In such cases, folding screens on rollers are used.

Kitchen

A kitchen partition should not only be attractive, but also suitable for the conditions of the food preparation area.

The design for the kitchen must have the following qualities:

ease of care. It is better to choose a material that is easy to wash. It is plastic, glass or aluminum;
resistance to moisture;
safety for others;
harmony and attractiveness.

Sliding partitions will allow you to create functional space. Glass screens will add depth and airiness to the room. The most durable structures are walls made of concrete or brick. They can be used to install heavy paintings, shelves, and household appliances.

The bar counter is popular as a division into zones. Plasterboard installations do not overload the space and make it more airy.In any case, the divider should not visually make the room smaller. There are a large number of lightweight options that not only decorate the room, but emphasize the dignity of the room.

Installing a partition will create a more stylish and functional interior. In this case, the space is divided into several zones.

Video: sliding partitions as an interior element

Save time: selected articles delivered to your inbox every week