The angle grinder has become widespread due to its variety of functionality. This type The tool is universal, as it is capable of performing work such as cutting, grinding, and cleaning. The functionality of this tool can be expanded, but this will require some accessories. These are devices for an angle grinder that will allow you to make a tool out of milling machine, wall chaser, cutting machine and others.
To make any device for an angle grinder with your own hands, you first need to decide what materials are available for manufacturing. You should also decide what exactly should be made: a milling or cutting machine, a wall chaser or a dust collector for working with tools indoors.
To make such devices, there is usually no need to buy Additional materials or parts, since absolutely any simple available materials will do. To make some devices, such as a dust collector casing, it is enough to use a plastic canister of oil or brake fluid. Using a tin can you can construct hand mill for making coarse flour.
It is important to know! When starting work, decide what exactly you want to get from the grinder in the end. After all, such a design must be necessary, and of course reliable.
Stand for grinder
It is not possible to make such a device for an angle grinder, like a stand, with your own hands. special labor. Its manufacture will allow the tool to be used for more precise sawing work. various types materials. When making a cutting machine, the following tasks must be completed:
- Reliability of tool fastening.
- Reliable fixation of the tool in the upper position.
- Ensuring minimal deviations from the cutting plane.
Grinders are well suited for secure fastening threaded connections. Additionally, you should also worry about safety, so the tool should be equipped with a homemade casing.
For grinders for circles with a diameter of 115 mm to 150 mm, they can be attached to the stand using clamps. Tools for a circle diameter over 150 mm must be securely fastened not only to the moving console, but also to the work table or bed. To reduce vibrations and increase cutting accuracy, it is recommended to firmly fix the frame to a workbench or other base. Below is another version of the stand with a fixed angle grinder.
DIY pendulum cutting machine
To manufacture such a device from a grinder as a pendulum cutting machine, it will be necessary to ensure that the moving console automatically returns to the reverse position. This is achieved by installing a special spring, rubber band or counterweight, which will automatically return the used angle grinder to its original position.
The production technology of such a machine is almost identical to the previous one. The difference lies in the addition of an auto-return mechanism for the moving part on which the angle grinder is attached. This makes human work easier.
Milling cutter from a grinder
The grinder can also be used as a router. It is important to take into account the fact that the tool must be able to be removed from a homemade device. To make such a design, you will need to secure the angle grinder under the table (or workbench) you have made, and bring the tool shaft into the hole in the workbench using an adapter with a collet clamp for cutters. The manufactured tool can be used to carry out various woodworking tasks depending on the cutter used.
Circular grinder
You can make it from a grinder. To do this, you will need to make a reliable frame or base to which the tool will be attached.
It is important to know! Woodworking discs should only be used of proper quality. The absence of at least one tooth prohibits the use of a disk for cutting wood.
If during the manufacture of a cutting machine cutting tool should be located above the work table, then when designing a milling unit and a circular saw, the opposite is true. The grinder should be placed under the tabletop, from which a certain part of the disk emerges through the corresponding hole. Additionally, you can screw a ruler to the tabletop, which will help you cut wood more accurately.
Do-it-yourself wall chaser from an angle grinder
The grinder can be used to cut cuts in the wall. They are made so that wiring, pipes and other elements can be laid in them. When working with a stock angle grinder, it is very difficult to control the immersion depth of the disc. To solve this problem, you can make a special frame.
It is important to know! Such a device for an angle grinder has important advantage, as it allows you to adjust the depth of the groove being made.
Such a frame is a sole with a stop, through which you can move the tool along the wall with uniform depth, thereby obtaining a groove of the required depth. When making this, pay attention to the protective cover and a special dust collector. You can use a bag as a dust collector, but it is more convenient to connect a hose from a vacuum cleaner. With its help, dust will be sucked out, making such work much more pleasant and dust-free.
About a homemade dust collector
A dust collector or casing for an angle grinder can be made from an old aluminum pan, pieces of thin metal or plastic canister. The casing made from a pan will be more reliable, but at the same time plastic construction much easier to make.
For construction, a galvanized sheet is also suitable, which should be welded based on the dimensions of the existing tool. Important condition lies in the reliability of attaching such a homemade product to an angle grinder. In addition, the dust collection hole can be made with the most convenient angle of inclination, unlike purchased dust collectors.
Protractor for grinder
A protractor for an angle grinder is also called a device for cutting along guides. To make such a device, they most often take metallic profile or channel. To construct a protractor, you need to build a structure from the corners of metal, as shown in the photo below.
Now all that remains is to fix the tool to the resulting product, which will result in a full-fledged protractor, through which you can adjust the cutting depth.
In conclusion, it should be noted that the material presents only the main types of devices. In fact, an angle grinder is such a universal unit that ideas for its modernization are constantly being updated. Choose from the proposed list the devices you need and turn them into reality.
The grinder is a useful and versatile tool. It is suitable for cutting metal, stone, tiles and grinding surfaces. However, sometimes there are situations in which a stationary machine is more suitable for this type of work. It’s good that using certain tools for an angle grinder, it can be turned into a cutting machine.
Finding a ready-made machine that meets your needs in stores is not difficult. However, the likelihood of finding a design that firmly fixes the angle grinder and does not dangle during operation is not great, since they are all made of duralumin. For this reason, many people prefer to make various accessories for an angle grinder with their own hands.
When performing construction and installation work a large amount is used different instruments. The most commonly used grinder is the grinder. The main task for which it is used: metal cutting; processing of building materials.
If you also use attachments with this tool, you can expand the number of options for its use. In particular, using this tool with attachments, you can perform high-quality grinding blank bases. They will be cleared of foreign inclusions. Attachments for grinders can be purchased at the store. But if you do not want to pay money, then you can make them yourself.
In some cases, this tool is used as a wall chaser. With his help grooves are created for laying pipes and electrical wires. To use an angle grinder in this capacity, you will have to perform some manipulations and increase standard width protective casing. In addition, you will need to make a support plate.
This tool can be used with one disk or several at once. If the grinder is used with two disks, then it is necessary to make some changes to the attachment point of this tool. After this, the grinder can be used in standard mode.
It often happens that during repair work and there is a need to clean the base of parts that are difficult to access. In such cases, craftsmen most often resort to using a homemade device for an angle grinder in the form of a special attachment, thanks to which the disc small size can be carried beyond the dimensions of the angle grinder.
In this case, the rotation will be transmitted using special belt drive from the main drive. Using this design, materials cannot be cut. However, scale can be removed from the surface of materials without any problems. It often occurs on the surface of welds.
Currently, the market offers a large number of attachments for tools such as an angle grinder. Their use makes it possible to significantly expand application options this tool. If we talk about the most commonly used attachments for grinders, we can highlight the following:
- a device for sanding the base and removing the paint layer from the surfaces of materials;
- beds;
- protractors.
Materials and tools to make attachments for an angle grinder
When the need arises to use an angle grinder for specific tasks, in this case many craftsmen opt for ready-made attachments. They can be purchased without any problems at a hardware store.
The cost of the devices is not very high, so everyone can afford them. There are also no difficulties in finding these attachments. However, despite all this, many people still decide to make attachments for an angle grinder with their own hands.
If you decide to make attachments for this tool yourself, then before you begin, you need to prepare the following tools:
- An electric drill, it is advisable to purchase a set of drills in addition to it;
- It is advisable to choose discs with a diameter of 125 mm.
- Wooden bars.
- Metal corner.
- Duralumin steel plate.
- Self-tapping screws.
Work technology
Before starting work, you need to cut a plate out of metal. After this you need to make an angle out of it. To achieve your plan, you must first do triangle shaped cutout in the workpiece shelf. And when this is done, the workpiece must be bent at a right angle.
Further, the design of the plate should drill six holes. The diameter of each of them should be 4 mm. Subsequently, it is in these holes that the self-tapping screws will be installed. With their help it will be possible to fix the handle, corners and timber. All holes must have special recesses for screw heads.
To securely fasten the beam handle, a few self-tapping screws are enough. The fasteners used during this work must have dimensions of 3x35 mm. This will result in an L-shaped part.
After this, all the elements together with the plate are assembled into a single structure. The created tool fixture must be secured using 3x20 mm self-tapping screws.
So, the basis of the future structure has been made. Next, you will need to perform installation of metal corners. You should have several of these items available. They must have the following dimensions:
- 75x30x55 mm;
- 45x60x60 mm.
Please note that the first corner must be extended to 60 degrees. If this is not done, then you will not be able to achieve your main goal - to fix the manufactured structure on the grinder. When the installation of the metal corners is completed, the tool itself is attached directly to them.
To connect the tool and structural elements, use a separate handle on one side, and bolts with nuts, on the other side. The latter are necessary so that during work the screw of the structure does not unscrew.
If desired, you can refuse to install the nut on the handle, since it will be held by the hand of the master during work. At this point, the work on creating a cutting structure can be considered complete.
How to make a frame for an angle grinder
Grinders are often used together with a stand. They are used mainly for the master to perform certain works for cutting materials and workpieces with less physical effort.
It is obvious to everyone that it is extremely difficult to hold a heavy instrument for several hours. Therefore, to make their work easier when performing an operation, many craftsmen make special devices, which are called beds. When an angle grinder is equipped with such a device, cutting work can be done using only one hand.
To make a frame, you first need do wooden box . You can get by with only one side on which the tool will be attached. All other walls can be removed, and legs of a special design can be attached instead.
But in order to achieve the effectiveness of using an angle grinder with such a device, it is necessary to make some changes to its design.
The first step is to do dismantling the casing of the angle grinder. After this, you need to put a disk on the instrument. When this action is completed, it must be pressed against the side wall of the device.
It is necessary to mark where the gap was made for the movement of the nozzle or disk. Its width should not be too large, otherwise foreign objects may get inside the structure during work.
If desired, the gap can be increased. The need for this arises in cases where it is necessary to replace the nozzles without completely disassembling the entire structure. Samples of wooden blocks can be used as support elements. After this, you can begin cutting workpieces.
Protractor for grinder
When carrying out construction and installation work, an important device for an angle grinder is a protractor. It is especially indispensable when work is carried out on processing or cutting metal profiles.
By using such devices, you can easily calculate cutting angles blanks And this has a positive effect on the speed and quality of work performed. In addition, this device is suitable for cutting metal profiles.
- This type of design is widely in demand when working on wall and floor tiles.
- They are also used for cutting and processing flooring and baseboards.
By making a protractor for an angle grinder with your own hands, you will no longer need to purchase special tools, which are often expensive and large in size. For industrial use a homemade protractor is not suitable, but for use at home it will be an excellent replacement for store-bought tools.
The operating principle of a homemade protractor design
The first thing to do is install guide angle, equipped with a special overlay, on the tile. A similar pad is used to prevent the workpiece being fastened from slipping. Therefore, thanks to it, displacement of the element will be eliminated.
Then you need to press the workpiece tightly against the shelves of the corner. After this, the user must set the cutting angle he needs.
Next, you can proceed to cutting the material. When performing this action, it is necessary to take into account that when cutting it is necessary to press lightly on the disc. There is no need to make any serious physical effort.
A homemade protractor for an angle grinder has a design consisting of the following elements:
- Corner.
- Loops.
- Bolt used for fixation.
Note that making such elements with your own hands is quite difficult. Therefore, if you are unsure that you can cope with such a task, then it is better buy in store ready-made models of protractors.
The grinder is a fairly popular tool among builders and repair specialists. It can be used to cut various materials And process workpieces and parts. However, sometimes specific operations are required. Therefore, experts purchase special attachments for the grinder. They can be found in stores without any problems.
The use of such devices allows you to expand the number of options for using this tool. However, it is not always necessary to buy them in construction stores. If you wish, you can make them yourself. To do this you just need to have free time and know how to properly make attachments for an angle grinder.
Corner Grinder, simply “grinder”, has three main areas of use.
- Cutting hard materials;
- Grinding with abrasives;
- Cleaning surfaces with brushes.
- 1 tripod for angle grinder
- 2 Clamp for grinder
- 3 Miter box from a grinder
- 4 Wall chaser
- 5 Fraser
- 6 Sawing machine for porcelain stoneware
- 7 Cooking
The technology involves holding the angle grinder with your hands while working.
However, for convenience and expanding the capabilities of the tool, many devices have been invented. Let's carry out short review:
Tripod for angle grinder
This mini machine allows you to solve the main problem when working with an angle grinder: if you hold the tool with both hands, who will fix the workpiece? IN in this case, an angle grinder with a cutting disc is operated with one hand, and the other can be used to hold and move the piece of metal being cut.
Moreover, the tripod allows you to install correct angle cutting, and the disk moves strictly vertically. The work is done efficiently and safely.
Craftsmen have long learned to make accessories for grinders for cutting metal and other solid compact workpieces on their own.
The frames are assembled from metal profiles, automobile shock absorbers, or even plywood. A well-made machine is no less reliable and safe than a factory one.
IMPORTANT! When working with any machine - factory or homemade, you must remember correct position protective casing.
If your structure is strong enough and provides operator protection, you can use a tripod for sawing wood. The main thing to remember is safety. main reason injuries – an uncontrollable grinder that escapes from the hands when the disc gets jammed in a tree has been eliminated. But the disc itself can still cause injury.
Therefore, when manufacturing such a device, it is better to make the switch non-fixed. For example, in the form of a foot pedal. Then you can instantly turn off the power if the device gets out of control.
When there is no need to work with wood, but only need to cut a large amount metal blanks– there are more simple options.
Such a mount can be made in an hour, and the ease of use will increase by an order of magnitude. If you know how your hands “fall off” after cutting fifty pegs from metal corner– this design is for you.
Clamp for grinder
The second most popular way to add convenience when working with an angle grinder is to fix the tool motionless on a workbench or in a vice.
By installing the appropriate disk, you can get an excellent grinder, or just sandpaper. The Bulgarian herself never ceases to be such. At any time, unscrew the mount and proceed to handmade.
If you attach a strong stop with a slot across the disk, you can process parts with high precision while holding the workpiece in your hands.
Remains most in demand disc sawmill from Bulgarian. Having made a strong frame and securely fastened the angle grinder under it, you get a seasonal sawing machine that can be easily disassembled if necessary.
At the same time, you still have a grinder and a great workbench (albeit with a slot in the middle of the tabletop).
Miter box from a grinder
If you turn the tabletop under an angle grinder, you will get an excellent miter box. Using such a device, you can quickly cut a plinth, baguette, or profile from any material at a fixed angle.
You just need to install the appropriate disk, fix the tabletop at an angle of 45 degrees - and cut the platbands for windows wooden house turns into pleasure.
With this machine you can easily cut paving slabs diagonally, diversifying the ways of laying them.
Something similar is also produced in an industrial version, but the cost of such devices will scare off not only home handyman- but also a small team of mechanics.
Wall chaser
Often, when laying electrical wiring or cutting passages in a wall, an angle grinder is used as a wall chaser. At the same time, comfort and safety during work leaves much to be desired. If you make an attachment for an angle grinder with a solid base, you can make cuts in the walls as far as the diameter of the disk is sufficient.
In essence, it is a support sole that allows you to smoothly move the angle grinder along the wall, with uniform force. When you make this device for an angle grinder yourself, take the time and install a closed case with a pipe for connecting a vacuum cleaner.
Fraser
Since any angle grinder is equipped with a powerful motor with a gearbox, a stationary milling cutter can be made from it. Again, provided that at any time the tool is removed from the homemade device for use according to direct purpose. The shaft of the grinder is brought out into the hole of the workbench, a chuck for milling heads is put on it - and you can process wood that is not too hard.
IMPORTANT! Since angle grinders are not intended for this type of work, you will have to take care of injury safety yourself.
Sawing machine for porcelain stoneware
Working with stone requires special care. When the disk is tilted, you can damage the workpiece (which is not very economical) or split the disk. It is necessary to ensure rectilinear movement grinders, while simultaneously controlling the depth of immersion.
To automate the process, a special machine has been developed with guides along which the tool moves without deviating from the trajectory.
In addition, the cutting angle can be fixedly changed, expanding the processing capabilities. It is difficult to make such devices with your own hands, but if you develop sensible drawings using computer modeling, you can design a machine no worse than a factory one.
Cooking
It would seem, where is the grinder, and where is the kitchen? Unless during repairs you can see this tool there. However, in in capable hands Nothing is impossible for an angle grinder.
Using a two-liter tin of tomato paste and a piece of galvanized steel, you can make a mill from an angle grinder in half an hour.
In the bottom of the can we make a hole along the diameter of the protective casing, instead of which it is put on. We put a galvanized strip on the shaft and fasten the nut for the metal disc.
We fill in half a can of grain - and after a few minutes we get coarse flour. After sifting, we get quality no worse than store-bought.
This is a rather non-standard use of the tool, but a grain crusher for poultry– time-tested technology.
Since the volumes are almost industrial, production should be approached responsibly. The materials used are shown in the illustration.
IN plastic container grain is poured in. Through a hole in the plywood frame it falls onto the blades and breaks. Factions the right size pour out through calibrated holes in the sieve, the rest is processed until it reaches the standard.
And for dessert - a very exotic device made from a grinder - an apparatus for producing cotton candy.
The working tool is a metal lid with holes in a circle.
The angle grinder is placed in a container.
Sugar syrup is poured into the lid - the cotton wool is ready! 
Various do-it-yourself accessories for an angle grinder - video.
Do-it-yourself universal machine or device for an angle grinder - video
If you want to make accessories for an angle grinder with your own hands, the drawings will be very useful to you. With their help, you can assemble all kinds of homemade designs, the main task of which is to expand the functionality, increase safety and simplify the operation of the angle grinder.
Working with an angle grinder, this power tool allows you to perform three main operations:
- Cut hard materials;
- Grind the surfaces of products with abrasive wheels;
- Clean surfaces with special brushes.
We offer you a way out of the situation - a device that will make the grinder stationary. Various types of adaptations allow you to make a full-fledged machine with expanded capabilities from an angle grinder.
Available accessories for grinders
Fixture drawing
Let's look at the devices that you can actually make from an angle grinder with your own hands. You will need assembly instructions, useful recommendations and video guides.
We offer the following accessories available for assembly for your angle grinder:
- Tripods;
- Fasteners;
- Miter box;
- Milling cutters;
- Wall chasers;
- Design for cutting porcelain stoneware;
- Culinary device.
Now every submitted homemade device Let's look at it separately. Let's find out how you can make this or that design and improve your corner corner with it. grinder(angle grinder).
Tripod
- A tripod solves the main problem of an angle grinder - the need to hold it with your own hands, while there is no one to install the workpiece.
- If you make a tripod, you can hold the grinder with one hand, and hold and move the workpiece with the other.
- Using tripods, the cutting angles of the grinder are set, while the disk moves strictly vertically. This device improves the quality of processing and reduces the risk of injury.
- To make a tripod, use a metal profile, car shock absorbers or regular plywood.
- If you make the device correctly, the angle grinder will turn out to be an excellent stationary installation with a level of reliability and safety equal to factory tripods.
- An important element of a tripod is protective cover. If it is available, you can place wood on the workbench, work on wood, metal, and plastic.
- Using a tripod, you can protect yourself from the main causes of injury when working with an angle grinder - an angle grinder falling out of your hands or a jammed disk when working on wood.
- When making a tripod, it is recommended to convert the power button into a pedal type regulator. This will allow you to quickly turn off the power by releasing your foot from the pedal of the device.
- On average, a tripod can be made in an hour if you use simple drawings. They are not much inferior to factory tripods, but in financially are almost free.
Retainer
- A retainer or holder is the next most popular element that allows you to make a functional device out of an angle grinder;
- The purpose of the latch is to secure the power tool. This is how you get a stationary saw;
- The clamp performs fastening on the required surface - table, workbench, vice;
- This mount has an important advantage - you can remove the holder at any time, returning the power tool back to manual operation mode;
- A stop with a special slot can be installed across the disk. This addition allows you to process high-strength parts while holding the workpiece with your own hands;
- The most popular clamp is a sawmill from an angle grinder. To make it, you will need a high-quality frame under which the angle grinder is fixed. In just a few hours, the grinder turns into a full-fledged sawmill, which can be quickly disassembled as needed.
Miter box
- By making the work table under the angle grinder rotary, you will get an excellent device - a miter box.
- Miter box for electric grinder allows you to work on wood, cut skirting boards, profiles, baguettes, and wooden blanks at an adjustable angle.
- For these purposes, you need to install the required disk on the grinder and fix the work table at an angle of 45 degrees.
- This is an incredibly convenient unit for those who need to cut large quantities window casings, glazing beads, skirting boards, etc.
- A miter box in combination with a grinder facilitates slicing paving slabs in a diagonal direction. This will allow you to diversify the options for laying the material.
- Miter boxes for grinders are manufactured by factories, but the cost of such units is unreasonably high. Therefore, a homemade device is much preferable for working at home.
Wall chasers and milling cutters
- Wall chaser. The grinder can be used as a wall chaser, which requires laying electrical wiring or cutting passages in the wall. By holding an angle grinder, you greatly risk your health and the quality of the work performed. For similar purposes there is special device- nozzle on a solid base. It is a support sole that facilitates smooth movement of the tool along the wall, while creating uniform force. Be sure to make a case closed type. It would be a good idea to equip the device with a pipe through which the vacuum cleaner is connected;
- Fraser. This device is possible to implement, since most angle grinders are equipped with a gearbox and a powerful electric motor. To make such a design, you need to bring the angle grinder shaft into the hole of the assembled workbench, put on the milling head chuck and the device is ready for work. This device is designed for woodworking. But cutting too hard rocks is not recommended.
Porcelain stoneware processing
- Working with stone is a responsible thing, accompanied by certain difficulties and risks.
- If you tilt the grinder disc incorrectly, you can easily damage the porcelain tiles. Its cost is already not small enough to allow such a defect.
- Another situation is the split of the saw blade cars.
- Task of this device— allow you to control the angle of entry into porcelain tiles and ensure straight-line movement of the power tool.
- To automate the processing of porcelain stoneware, drawings have been developed special devices with guides. Assembling them with your own hands is not so easy, but it is possible.
- The main feature is the guides along which the grinder moves with enviable precision, ensuring an even and neat cut.
culinary device
How can cooking and an angle grinder be related? In the most direct way.
Using a grinder and available materials, you can get an excellent homemade mill or coffee grinder. The build process looks like this:
- Take a two-liter jar made of tin;
- Arm yourself with a strip of galvanized steel;
- Make a hole at the bottom of the jar, the diameter of which is equal to the diameter of the protective casing;
- Remove the casing and disk, and in their place pass the shaft through the hole;
- A piece of galvanized steel is placed on the grinder shaft, matching the described radius inside the can;
- The galvanized sheet is screwed with a nut to the angle grinder shaft;
- Pour grain or coffee inside the jar, close it and turn on the angle grinder. The flour or coffee is ready for brewing.
Making your own devices is not difficult. You just decide which version of the device you need.
If you have ever worked with an angle grinder, then you already know all its disadvantages. The main thing in this case is not high accuracy cutting samples if done manually. The course of such a problem is quite difficult, which is especially important when it is necessary to create several elements with the same general parameters.
If we take into account vibration and kickback, then the stationary installation is, of course, more stable in operation. But buying a machine for industrial production cannot be used for its intended purpose at home. So the most simple model The machine will cost about 22,500 rubles.
But such equipment also has some disadvantages that can lead one to believe that it is easiest to create a cutting machine using a frame and just a grinder. Factory-produced models of such machines are limited in use. For example, the model discussed above can only cut 100mm pipes. In everyday conditions, very often you have to work together with samples of a higher quality cross-section. In addition, everyone has their own needs, so specific model simply cannot fully satisfy them.
Factory appliances can be significantly modified, but most often this occurs in conjunction with financial investments. In some cases, it is generally irrational and incorrect to change the device. This will apply to equipment that is created from alloys that are difficult to process. Nowadays, home craftsmen very often try to create a machine made from a grinder on their own. To accomplish this task, you can use several methods at once. If you look at them in detail, you can come up with your own design.
Drawings of a cutting machine from an angle grinder
Before you start creating a machine from a grinder, you should prepare additional components and parts, which can be pipes or an angle grinder, which will play the role handles and frames. It is best to strengthen the grinder on it using a special metal plate. To create such a blank, you need to use a thick piece of iron; creating such a device will take about 30 minutes.
A metal sample will be used as a support; it is best to weld a corner to such an object. The end of the lever should be installed on the axle, since the reverse stroke will be accomplished using a spring. If you create a cutting machine using a grinder yourself, you can end up with light-weight equipment that can subsequently be placed absolutely anywhere. In addition, the assembly of the device will not require significant financial outlays, because everything necessary details can be found in everyday life.
The second way to create a machine
Creating a machine using an angle grinder using this method will be a little more complicated, but the tool will provide more efficient precision in cutting materials. To carry out the work you will have to create:
- Desktop.
- Ruler.
- Special frame structure.
The table frame should be welded from a corner and a channel. As a tabletop, you can use a special sheet metal, but in in some cases use materials such as:
The decision about what material to use during creation will directly depend on the purpose for which you want to use such a device, as well as what circuits you will work with in the future. In the process of creating a machine from a grinder using this method, you also need to create a frame structure, one part of which will be completely motionless and will serve as an additional support.
One part must be placed on the tabletop and firmly fixed with special bolts and welding. The second structure will be connected to the first using hinges. The angle grinder itself will be installed on it, the position of which can be easily changed independently. To return the equipment to its original state, you need to use a special spring.
If you create a cutting machine from a grinder, then a ruler is also used to create it. Using a ruler you can easily set general dimensions all samples. For this purpose it is most often used separate tube or a piece of iron with marks and a movable marker.
Today a large number of various models machine tools Sometimes the angle grinder is placed under the tabletop, and sometimes above the surface itself. If we talk about safety precautions, then it would be best to place a cutting machine with your own hands, the drawings of which you can create entirely yourself, on top, since this particular option will be more reliable.
A special cutout is made along the special line where the disc in the angle grinder meets the tabletop. If you have any knowledge of electrical engineering, then switching on should be done through a special magnetic starter, in which case the start button will be combined with a specialized pedal. Even when the operator’s hands are full, he will be able to stop the machine with his foot in any case.
When creating a cutting machine from a grinder yourself, the drawings should be examined very carefully. Very often they help to avoid making unnecessary mistakes in the design of the device. It is very important to observe all the rules safety precautions. At the moment the assembly of the machine is completed, it should be run again, which will help to finally make sure that there is no runout of the disk itself. It should not touch the protective casing of the machine.
To create a cutting machine for metal, you may prefer to use the pendulum variety. At the first stage of creation, it is worth using profile pipes for this, which are good to use in the process of creating the pendulum frame. A metal profile is most often used for cantilever fastening; it can be supplemented with a special steel bar or a metal bus.
If the machine will use load-bearing platforms, the sheet steel must be completely cut to size. To a lever that has the form of a segment profile pipe, it is worth attaching the cross section by welding. At this time, it is worth following the perpendicularity of the fastening.
A groove is a special groove that needs to be cut in the wall for installation electric cable and wires. The difficulty lies in the fact that the groove must always be of constant depth and width. Only in this case will the wire be laid evenly and the total solution for laying will be much smaller.
A wall chaser is used quite rarely in everyday use, so purchasing one for your home will be unequal. But it can be easily created on one's own, using for this purpose the diagrams of an angle grinder - the most famous grinder.
The main task in this case is to install two diamond blades on the shaft of an angle grinder with a total distance of less than one centimeter:
- First, install the first disk and secure it with a nut.
- We install the second disk and also secure it with a nut.
- We check the total distance that has arisen between the two disks.
- Install additional protection to Bulgarian.
- Once again we check the quality of the device.
If for some reason you are unable to create two disks on the shaft, then the groove can be easily cut and simple method one installed disk. To do this, you just need to cut a second parallel line.
Work with wall chasers should be carried out in one room. During operation, a large amount of dust is generated. Even an ordinary respirator cannot save you from it. In order to remove such a negative impact, it is worth creating a special protective casing that can hide several disks at once and will have a special pipe for connecting to a vacuum cleaner.
Such a device is available at electric jigsaws for collecting small sawdust. In some cases, lovers of rational use of the device add two or four rotating rollers to the casing. While the wall chasers are moving along the surface of the entire wall, they will move evenly without creating any loads on a person’s hands at this time.
To create such a design on a wide groove, it is worth making special bushings to implement disk mounts to the main spring. With such a wall chaser you can easily create grooves for further pipe laying.
In this case, the protective casing must be made wider. It is worth installing an additional screw on the wall chaser casing, wires, as well as on all pipes to adjust the level of immersion of the cutting device into the wall. In this case, the casing will include two parts at once, which will be connected to each other by a hinge and a unit for adjusting the main plunge.
In some cases, there is a need to mill a hole in some surface, but there is no familiar milling machine nearby, and it is impossible to find one. If you also have an angle grinder - an angle grinder, then this will become good decision Problems. To do this, you need to choose a machine from two options - a movable table or a movable machine.
In the first case, it is worth securing the material or the part that will be subject to the milling process, and the grinder is attached to vertical plane to the frame itself. On the frame, it will be possible to easily shift the plate to which the grinder itself is attached left and right, forward, and also backward. In another way, we can move the grinder in relation to the workpiece itself.
IN next option the grinder will be firmly fixed, and the workpiece itself will begin to move in a similar manner left and right, forward and backward. These will be the main directions for the milling process. For milling along a specific up-down axis, it will be very easy to add such a device.
After selecting a specific machine, you can implement its creation. The only place where you will have to involve a turner is holding the cutter itself. It is machined from a hexagon no less than 16 millimeters wide, since it itself thread grinders are about 14 millimeters. Collet type holder. It is very easy to create and does not have strong beats. A simple jaw chuck copes with this task much worse.
The main advantage of such machines, as with all machines created from an angle grinder, is that they can be modified back into simple grinder. As a type of milling cutter, you can create a drill from a grinder.
Features of the pendulum saw
It’s quite easy to create a device for an angle grinder yourself. In this case, you don’t even need to use drawings. It is enough that you understand the principle that is in this or that machine. The pendulum type of saw based on an angle grinder cannot be called an exception. This is the same cutting machine, but its weight is distributed into two parts.
At the same time, the saw is somewhat similar to a children's swing. There is a frame on the movable sleeve, and a special grinding machine is installed on it. In this case, the counterweight will be any weight combined with the trigger spring.
Any suitable part can be used as a hinge. In this case, the hinge is created from feigned hinges passenger car. Hinges are no longer used in modern products, but they will fit the machine perfectly.
