Plastic window sill on the threshold. How to make a threshold for a balcony. Make a plastic threshold for a balcony with your own hands

When the balcony renovation is almost complete, the windows and doors are installed, there remains one small final detail - installing the balcony threshold. There is an opinion that if the balcony is glazed, then it is not necessary to create a threshold to enter the balcony. But experienced builders advise that you must install a threshold on the balcony.

The main reasons for installing a threshold on a balcony

In fact, the threshold on the balcony door performs several tasks:

The aesthetic appearance of the entrance to the balcony is improved. Using the threshold, a smooth transition is made from the floor of the main room to the exit to the balcony.
Even if the balcony is glazed, the threshold on the balcony door serves as an additional obstacle to cold air entering the room. If the balcony is not glazed, then the threshold not only serves as heat-retaining protection, but also prevents moisture and dampness from entering the room.
Safety and ease of movement. Chances of tripping over a high threshold balcony door much more in cases where there is no threshold to the balcony.

Making a threshold for a balcony with your own hands is quite a feasible task even for a novice and inexperienced builder. But here, as in any construction business, there are professional nuances, the knowledge of which cannot be avoided in order to get a successful result of your homemade act.

Options for thresholds for balconies made of various materials

In order for the threshold to fit harmoniously into the interior of the room, it is necessary that the step in the balcony door opening matches the color of the floor covering of the room.

To finish the threshold, depending on the preferences and design of the room, the following materials are used:

How to make a threshold for a balcony yourself

The technology for manufacturing a balcony threshold includes several stages:

If the difference between floor levels is quite large, then instead of a cement-sand mixture, a brick base is used. When the threshold to the balcony is finally ready, it is recommended not to step on it for 24 hours.

For clarity and understanding of all the details of the process, there are a lot of videos on the Internet on how to make a threshold for a balcony with your own hands. A clear video instruction will explain to the novice craftsman all the stages of making a balcony threshold.

The new frame and door are installed on the balcony, which means it's time to take care of the threshold. For an experienced builder, this is a matter of minutes, but beginners in this area often ask the question “how to make a threshold for a balcony.” Of course, such a task will require skill from you and it may seem that it is not easy. But if you study the theory and understand it, there shouldn’t be any difficulties. Let's figure out what it should be like balcony threshold and how it can be done.

The need for a balcony threshold

In addition to attractive appearance your threshold performs a number of useful functions:

It creates a smooth transition from the floor of the room to the bottom of the balcony door. This is especially true for families with small children or elderly people.
It complements the protection against cold, which is currently provided only by polyurethane foam. Often it can let in cold, which reduces the degree of comfort in the room, especially if the loggia or balcony does not have glazing and insulation.
Moisture protection. If the balcony is not glazed, then precipitation can flow into the room through the cracks, the threshold will prevent this.
Eliminate heat loss through so-called cold bridges.
It will reduce the chance of tripping over an unfinished structure and make crossing it more comfortable.

Threshold manufacturing options

Most often, thresholds for balconies or loggias are made from the following materials:

bricks;
plastic;
cement screed and tiles;
wood

Let's look at each option in more detail.

Brick threshold to the balcony

Most often, this type of threshold is used when there is a large transition between the balcony frame and the floor of the room. It is the thickness of this material that will help to significantly reduce it.

The balcony door threshold is important structural element the entire structure. According to builders, a small threshold is simply necessary. Especially if it was initially provided for in the house design.

It is a common belief that a projection for a balcony door is an extra detail between the main room and the balcony; it is inconvenient and only gets in the way. But such a protrusion was provided by architects for a reason. It is required due to technical requirements.

Finishing the threshold of a balcony door is important because it determines general form premises and convenience during operation.

Its purpose and types

The element is designed to provide comfort and safety in the home. In addition, setting a threshold is necessary for the following compelling reasons:

Protecting the living room from the penetration of cold. If you remove the threshold and leave the balcony level only with the floor of the room, a “cold bridge” will appear. Condensation will appear in this place and the risk of premature destruction of the reinforcement and metal parts. In turn, this will negatively affect load-bearing capacity balcony slab.
Installing a threshold on the balcony door separates the zones of the room. This is convenient even in cases where the loggia is combined into a single space with a room.

The part can be made in the form of a step or a small step. She has various indicators depth, width and height. To design the ledge, brick, cement-sand mixture and finishing material are used.

Threshold finishing options

To finish the threshold, the same material is used as on the floor in the main room, since this achieves a harmonious look of the room, and the protruding part fits well into the interior. The most popular options for finishing materials are:

ceramic tile;
linoleum;
wood or stone laminate;
tree;
special plastic plates.

The final result largely depends on the quality finishing work. If there basic knowledge and experience, you can do the work yourself. If you are not sure that everything technological processes will be done correctly, it is better to entrust the design to professionals.

Working with bricks

The construction materials from which the ledge is constructed can be very different. In some cases, an irreplaceable material is brick. It is great when after renovation there is a large distance from the door frame to the floor.

Before starting work, it is necessary to properly prepare the floor surface, that is, level the existing coating.

For laying bricks, it is necessary to use special solutions made from a mixture of cement, gypsum and sand. They provide good surface adhesion.

Filling with mortar

If the gap between the door and the floor is small, the best material The starting material will be cement and sand. The process of creating a design is quite simple:

The floor is prepared for pouring (cleaned and leveled with putty).
Wooden formwork gets knocked down the right size and shapes.
A mixture of cement and sand is mixed. It is important to observe the proportions: for 1 part of cement you need to take 3 parts of sand. For strength, you can add a little small stone. Mix everything thoroughly.
Ready concrete mortar The space in the formwork is filled. Its surface is carefully leveled.

After the concrete has completely hardened, installation can begin. finishing coating.

From a plastic window sill

For threshold trim balcony frame made of plastic, the material from which the frame is made has a great advantage:

Plastic quality finishing material fits harmoniously into the overall appearance of the structure.
He's practical. It is easy to care for.
When using the material, there is practically no construction waste left.

For this design, ready-made window sills are used, which are the same size as the future threshold. The advantage of using plastic is the speed of its installation.

The installation process is not complicated. First, the guides are fixed to the walls using self-tapping screws. Then a plastic threshold is installed and additionally reinforced with polyurethane foam.

Wooden structure

Wood is easy to work with. For wood cladding they use: wooden blocks, chipboard, screws and construction tools.

The creation process is as follows:

A base of bars, that is, a frame, is mounted.
By using metal corners the frame is attached to the floor.
Panels of the required size are cut from a sheet of chipboard and fixed with self-tapping screws.
The finished threshold is covered decorative coating or a tree.

Wood trim is versatile. It can be used both when the protrusion level is large and when it is insignificant.

From the author: Why do you think a plastic threshold for a balcony door is needed? And is it needed at all? And does it have to be plastic? This is what we will talk about in our article. And in addition, you will learn how to repair and/or install a plastic threshold in front of the balcony door.

Essence of the question

Before we begin to directly discuss the topic, let's briefly highlight the essence of the issue regarding plastic (or any other). Why is it needed and is it possible to do without it?

If you decide to level and insulate the floor on the balcony by screeding or installing wooden logs, - then the floor on your balcony will naturally rise. The height that it “reaches” can be different (up to 20 cm). However, now this is not so important to us. The important thing is that it should not exceed the height of the floor in the adjacent room. Theoretically, this is, of course, possible, but there is no practical sense in it.

Some craftsmen mistakenly believe that a concrete (or whatever) threshold serves as a guide for raising the floor. But no, no, and again - no! It is not the threshold that serves as a guide, but the floor and only the floor in the adjacent room. And nothing else.

Theoretically, this threshold can be dismantled to create a feeling of a single space with the room. If you really want, you can even connect the balcony with the kitchen, living room, bedroom or other room. There is a separate article about this on our website. If dismantling the threshold does not cause freezing of the ceiling (this is bad, first of all, for your neighbors below), and in general, if this threshold does not play any role, then it can be dismantled without unnecessary regrets and fears. Unless, of course, you want to visually combine two spaces: a balcony and a room.

But we are talking about exactly the situation where a threshold is provided. We keep talking and talking about some kind of threshold, but what exactly we are discussing is not entirely clear. At least if I were a person reading this article who has never inserted plastic windows, and in general - I did not deal with repairs and construction - it would not be entirely clear to me what we're talking about. And the value of information lies not only in /what/ is said, but first of all in /how/ it is said/written. That is, the main thing is accuracy and clarity.

Let us now bring this necessary clarity. The fact is that often a plastic door to a balcony is, in fact, the same window, only larger. And it functions on the same principle as windows. Only, as a rule, the door does not have a “ventilation” function. Although, if desired, you can not add this function to the windows, and you can safely add it to the door. However, this is not particularly important for us now.

The important thing is that the very concept of “balcony” metal plastic door"- conditionally. Technically, this threshold is the lower part metal-plastic frame. There is nothing to say about this part of the door. At least in the context of our conversation.

And the article is about that concrete elevation that is located at the junction of the room and the balcony. At the final stage repair work we have to decide the question of how to install the balcony door threshold. Technically, making such a threshold is not as difficult as it seems. At least if you have already done most of the work, then you have passed the most difficult stage. Therefore, the threshold for you is a mere trifle.

Throughout the text we will look at four traditional way threshold construction, but, as we understand, improvisation in the repair and construction business can be very appropriate. It all depends on how expedient and functional it is, and, in fact, the threshold can be made even from the computer keyboard with which this text was typed. But will this happen? non-standard solution practical and durable - the big question.

Each of the four methods described in the review has proven its reliability and practicality, so we will not argue that some of them are better and some are worse. You just need to choose the option that best suits the design and style of the interior. After all, if the interior is designed, say, in the style of Hi-Tech or minimalism, a wooden threshold will look inharmonious and conspicuous, creating an unpleasant contrast. Again, you need to look at the situation and strive to create harmony in the interior. Let's get started.

Method 1. Brick threshold

This solution is popular these days. It is appropriate to use brick if:

The height between the base and the frame of the balcony door is too high. Often it is compensated by the laid bricks. In this case, these bricks must be laid securely and evenly. Then the rest of the space will be laid out quite easily;
the threshold is badly damaged and is literally crumbling. Naturally, the problem can be solved in another way, but bricks can also be used in this situation. Moreover, it is quite effective.

It is worth noting that the use of brick will be possible only if the height of the difference is greater than the height of the brick itself (that is, more than 6.5 cm) - at least by several sentiments. The main thing is that the threshold is not higher door frame- and you didn’t have to redo the work.

Take note: if you want the solution to harden as quickly as possible, you can add a little gypsum to its composition (up to 10%). But if you overdo it, it will start to harden too quickly. Perhaps it will harden even before the work is officially completed, and we don’t need this; besides, there is absolutely no need for unnecessary haste in this matter.

Here are the tools we will need to bring our idea to life:

drill mixer;
bucket. Metal is better, because plastic may not withstand the blows of the mixer and may break. This happened only once in my memory, so I will share my experience with you and emphasize that such an outcome is possible. But if you are confident in the strength of a plastic bucket, feel free to use it;
two spatulas: wide and narrow. Using the wide one, we will collect the solution from the bucket and then transfer it to the narrow one. We will apply the solution narrowly to the surface. In principle, a spatula can also replace a mason's trowel. The amount of work is relatively small, so you will be equally comfortable (or not comfortable) working with any tool;
bushhammer. It may not be needed, but most likely it will come in handy. With its help, it is convenient to beat pieces of the desired size from solid bricks. The fact is that, perhaps, in some places it will be necessary to lay not a whole brick, but only a fragment of it. For a perfectly even cut, you can also use a grinder. But the trick is that we don’t need a perfectly even cut, and cutting with a grinder will create a lot of noise and dust;
building level;
construction float for grinding. But this is not necessary. Depends on which finishing method will be chosen subsequently.

WITH necessary materials and we figured out the tools. Now let's look at how you can implement your plan - and build a brick threshold:

Clean the surface from dust and small debris and, if possible, level it. If there are swellings polyurethane foam protruding beyond the edges - it must be carefully, if possible, cut off with a sharp knife;

Apply a layer of penetrating primer and let it soak in. This will take no more than a couple of hours;
prepare a solution. This must be done exactly as indicated on the package. The main thing here is not to overdo it with water and plaster. The composition should not be too thick, but not very liquid either. The consistency should resemble thick sour cream;
Apply the mortar in the place where the brick will subsequently be laid; the end sides of the brick should also be applied with the mixture so that the mixture is also contained inside the seams. This is how you lay the bricks. Since brickwork is done in one layer, this process does not involve anything complicated;
if necessary, break off a piece of the required size from the brick and insert it into Right place according to the same principle by which all masonry was carried out.

The evenness of the threshold is an important indicator, so when laying, use a building level to check and adjust. After the masonry has been laid, the surface should be covered thin layer mortar, and mount the same corner, pre-cut to size, on the corner. In order for the surface to be perfectly flat (or close to it), after the solution has dried, it must be rubbed with a construction float. This tool looks like this:

We’ll talk about how and what to finish the threshold on the balcony later. There are also several options available that are in no way inferior to each other. Again, the choice depends on the style chosen for interior decoration.

Method 2. Filling the solution

This method is appropriate if the threshold just needs to be raised a little. To a height that is less than the height of the brick (6.5 cm). But in some cases it can be used regardless of how high the threshold is supposed to be mounted. This method is quite popular, and, according to many builders, it is more convenient and faster than the previous one.

From building materials we need:

cement-sand mixture M-150. It is perfect for these purposes; moreover, it is relatively inexpensive. At the current exchange rate - ≈100 ₽ – 1 bag (50 kg);
penetrating primer and brush for applying it;
board for constructing formwork. Its thickness should be ≈25 mm, its length should be ≈10 cm greater than the width of the doorway (10 cm on each side), and the height should be that which is necessary (depending on how high the finished threshold should be);

Here is a small list of tools that will be useful to us during our work:

a bucket (metal) in which the solution will be mixed (or other suitable container);
drill mixer;
putty knife;
construction float for grinding the surface.

The work of filling the threshold occurs according to the following scheme:

preparation of the base. It is necessary to remove all small (and large, respectively) debris, cut off any protruding foam, apply a layer of penetrating primer to the surface;
installation of formwork. To do this, the board needs to be installed across the passage with its edge - and securely fixed. Any heavy object is suitable for fixing: bricks, a bag of mortar, and so on;
preparing the solution strictly according to the instructions;
filling. If the layer is thick enough - 10–15 cm - then construction waste can be placed into the thickness of the concrete - fragments of bricks or ceramics, crushed stone can also be used. If it is possible to lay reinforcement, great! Nobody says to knit a full-fledged reinforcing belt. You don't have to connect anything at all. Moreover, it is not necessary to use exactly the same corrugated reinforcement that is usually used when pouring. As we have already mentioned, improvisation would be quite appropriate: any metal products will do - even pipe scraps and other old plumbing fixtures, even metal grid, even fragments of old equipment. In general, any metal will do. This makes the structure more durable and reliable;

after the top layer has dried, grout with a construction float (as, indeed, in the first case).

ABOUT finishing let's talk later. In the meantime, we are waiting for a third option to resolve the issue.

Method 3. Installation of a threshold from a plastic window sill

This method is quite simple to implement and, just like the previous two, will not require large financial costs. But one thing worth taking into account important nuance: if the quality of the window sill from which we are going to make a threshold is low, then such a threshold-window sill will very soon crack, so the work will have to be redone. And this is not the best outcome of events. Don't forget that you have to step on this window sill. As an option, you can fill the space between the stiffeners with a solution. Can. But it’s better, after all, to just buy a high-quality window sill.

So, for work we need:

actually, a plastic window sill of the required length and width;
a container of polyurethane foam and a “gun”;
silicone sealant;
saw for cutting plastic window sill;
window sill plugs. But they may not be needed if the width of the window sill does not extend beyond the border of the slope;
stops made of bars (again, if such a need arises).

Here's how to do the job:

cleaning work surface from small debris;
measuring and trimming the window sill. Please note that you need to cut precisely. It is highly undesirable to make a mistake here;
try on the cut window sill and determine the height to which it needs to be raised. If the difference is insignificant - say, 1–1.5 cm, it can be immediately placed on foam. If the height is greater, you need to place bars;
applying polyurethane foam to the work surface. Just don't put it on too much. Please note that it tends to swell before it hardens. Therefore, if there is an excess of it, it can either lift the structure up (if the window sill is poorly pressed or not pressed at all), or due to swelling the window sill will go in waves, but it looks extremely unaesthetic;
pressing the window sill with an evenly distributed load and leaving it for about a day so that the mounting foam can dry and fix our window sill (which has already safely become a threshold). For additional fixation You can use self-tapping screws, but in this case there will be little meaning in them. Foam will perfectly fix almost any object;
sealing cracks along the edges using white silicone sealant. This product will protect the structure from moisture from outside;
installation of plugs, which can also be fixed with silicone.

The window sill threshold must lie flat, so before you distribute the load on it and leave it for 24 hours, check its position using a bubble level - and, if necessary, adjust it.

Method 4. Wooden threshold

Depending on the shade in which your flooring is designed, you can choose a type of wood that will blend harmoniously with overall design interior And if the interior contains elements from natural wood(let's say it's country style), this threshold is just what the doctor ordered. Or a designer.

Here are the materials we will need during the work process:

actually, a sanded board (or several boards) treated with an antiseptic;
several blocks to create a base.

The tools we will need are:

hammer drill;
fastenings (dowels/screws);
liquid Nails;
electric saw/electric jigsaw for cutting wood;
Possibly polyurethane foam.

The procedure for installing a wooden threshold can be the same as for installing plastic window sill. As we remember, almost anything can be placed on polyurethane foam. But you can do it differently. Here are the steps the alternative method will include:

preparation of the working surface: cleaning, primer treatment;
construction of a frame from bars of the required height. This mini-frame should be fixed with dowels and screws;
securing the board. As we remember, it can be fixed using polyurethane foam, but you can also resort to fixing it with self-tapping screws;
installation wooden corners along the perimeter. It is convenient to use liquid nails to secure these corners.

In addition, depending on the situation, you can use a plastic floor plinth. For example, after renovating your room, you were left with pieces of this plinth of different lengths. Now you know where they can be used.

Instead of solid board You can also use pieces wooden lining(for example, if they were left after covering the balcony). If you decide to use OSB, then this element must be coated with a special varnish; if it is wood, you can resort to using stain and, as in the case of OSB, a special paintwork. This is how we gradually approached the consideration of finishing options. Now we will talk about them.

Finish options

It goes without saying that a floor covering should be laid on a threshold made of concrete or brickwork. Although, perhaps, it should be placed on a wooden threshold. In any case, all options provide a good basis for laying any topcoat.

So, we will consider several options for the development of events.

Option 1. Tiling

The tile will fit perfectly on brickwork or at concrete base. Here's what you need to do to properly tile the threshold:

apply a primer to the surface to increase adhesion;
While it is absorbed, calculate the location of the tiles and take the necessary measurements. The tiles should lie evenly and symmetrically;
prepare the tiles for laying. To cut the tiles evenly, use a tile cutter or a regular grinder;

prepare tile adhesive according to the instructions on the package;
apply ready-made composition on the back of the tile using a notched trowel;
To ensure that the grout joints run smoothly, use special plastic joint crosses. The width of the seam should be from two to four millimeters;
fill grout joint fugue, which will protect the material from moisture and give the work a finished look.

Keep in mind that the presence of seams when laying tiles is mandatory (!) It’s not easy decorative element. These seams prevent cracking and peeling of the material from the working surface due to temperature changes. Essentially, this is the same delatation gap. Simply put, this is the play that allows the tiles to expand freely as the temperature rises.

If desired, you can also tile part of the wall under the threshold - depending on your design solution and the possibility of bringing it into reality. Read more about working with tiles in another article: “”. If you have a question: “What does the wall have to do with it?!”, I will answer: the principle of working with tiles is almost always the same, regardless of the plane in which the action takes place. Enough about the tiles. Now let's move on to the next option.

Option 2. Laying flooring

The second option can be generalized by calling it “laying flooring" But floor coverings are different. First, let's look at the laminate trim on the threshold. The algorithm of actions in this case is as follows:

necessary measurements;
cutting the laminate according to measurements. As a rule, one board is quite sufficient. For cutting, you can use either a hacksaw or a jigsaw. The main thing is not to cut off extra centimeters, so as not to spoil the board;
fixing the laminated board to the surface using liquid nails;
fixing the corner. These are usually sold in hardware stores in the flooring department.

In addition to laminate, you can attach other flooring to the threshold. For example, linoleum carpet or vinyl tiles (art vinyl™). This option is even simpler, since the materials mentioned are quite soft and can be cut using ordinary stationery knife. Plus, you don't need a big piece, and hardware store you can choose a small fragment from the leftovers (scraps) that come various sizes, and are usually sold at a discount. The smaller the fragment of flooring in area, the greater the discount on it. Some are sold for only 20% (or even less) of the cost for square meter roll coverings.

If you decide to use linoleum/carpet, simply take measurements and then trim the excess from a piece of flooring according to these measurements. Then simply glue it to the surface using linoleum and carpet adhesive. But if you have liquid nails or other glue at your disposal, use it. After all, buying a bucket of special glue (even a small one) just to glue such a small piece is impractical. When the covering is glued, fill the corner, which will protect the protrusion from damage during operation.

Conclusion

So we found out what to do if the threshold at the plastic door to the balcony or loggia suddenly breaks. In any case, you have an idea of what and how it can be made. Thank you for reading the article. I hope you found it useful.

The site also contains other articles that relate to more global topics regarding repair and construction. For example, there is information on how to combine a kitchen with a balcony, how to decorate and insulate the ceiling, walls, floors on balconies and loggias, as well as others useful materials, thanks to which you will learn how to arrange a balcony space with your own hands with minimal financial costs. All the best, dear reader. See you again at Seberemont!

P.S. To visualize the process, check out the video below.

In many apartments, especially old building, you can observe a situation where the floor between the balcony and the adjacent room is on at different levels. In this case, there are two options for getting rid of this problem.

Firstly, you don’t have to think about it - and just remove the threshold to the balcony. You just need to further level the floor - and then the difference in height will disappear. However, in this case there is a risk of noticeably worsening the thermal insulation of the room, because all the wind from the balcony, especially if it open design, will freely penetrate through the door into the room. IN winter period this can be a problem, making the room in your apartment or house much cooler. Despite all possible Negative consequences, it all depends on the decision of the owners.

Plastic threshold beautiful and easy to install

The second option involves installing a special threshold. Built near the passage, it will serve as a kind of step through which you can get from the room to the balcony space. And most importantly, by maintaining the difference in levels, it will be more difficult for the wind to freeze the wall adjacent to the balcony.

Air flows will rest against the threshold, which, in fact, is part of the external load-bearing wall. It is thick enough to keep you warm in winter.

Of course, in the end it is much preferable to choose the latter option. Even if you have to use the threshold every time you enter and exit the balcony, its presence will still bring great benefit during cold weather. After all, even if the balcony is fully glazed and additionally insulated, it is still much more susceptible to freezing compared to external walls.

If you are at the final stage of repairing a balcony and don’t know how to make a built-in threshold for a balcony with your own hands, this article will answer all the questions that arise during the work.

What materials should I use?

There are many ways to install a threshold on a balcony. The difficulty is determined by its location. For example, making an angular threshold is somewhat more difficult than usual. The choice of finishing material directly depends on the amount allocated for repairs, as well as the wishes of the owners in terms of aesthetics, strength and durability. Whether to carry out the work with your own hands or invite specialists - here everyone decides for himself. Of course, with some skill, this is a good opportunity to save money, but it’s worth double-checking your strengths so as not to pay twice later.

When choosing a method for finishing the threshold on a balcony, especially if you do it yourself, opt for the following options:

tree;
ceramic tile;
plastic;
brick;

They are the most popular when installing balcony thresholds. Now let's talk about the advantages and disadvantages of each of the presented materials, and also discuss the procedures for direct finishing.

Tile is one of the alternative options to plastic

The most common option is to make a plastic threshold for the balcony. The installation here is very similar to the installation of a window sill, only it is placed much lower than usual, turning into a real step.

Nothing complicated, everything can be easily done with your own hands - we knock it out external wall grooves at the level of the doorway, insert the canvas cut to size, fixing it with self-tapping screws, and secure it with polyurethane foam.

The surface must first be degreased for better adhesion. We leave the threshold untouched for 12-15 hours. We place a weight on its surface to prevent the expansion of the foam. After it hardens, we cut off the excess and seal the space under the threshold at our discretion - usually installing a plinth is enough.

The result is a completely decent built-in threshold that is in harmony with window block and fits well into the surroundings. Of course, due to the use of polyurethane foam, its service life is somewhat lower when compared with other finishing methods - nevertheless, it tends to lose volume and density over time. On the other hand, the comparative ease of installation and its low cost mitigate this drawback.

The plastic threshold is not designed for heavy loads

Making a wooden threshold

So, a tree. Its main advantage is environmental friendliness and ease of installation. You can build a wooden threshold for a balcony with your own hands in just a few simple steps. First, a frame is prepared from dried wooden slats- it is desirable that they be treated with a special moisture-resistant composition. We lay the finishing boards on the resulting base. In addition to them, you can also use laminate or plywood.

It is worth noting here that it is better to cover the latter with linoleum or carpet, since by itself it will not last too long. And from an aesthetic point of view, it will be much more reasonable. This method of creating a threshold is recommended in cases where it is necessary corner option, due to the ease of creating a frame. In this way you can make not only a threshold, but even an entire cabinet for a loggia or balcony.

DIY ceramic threshold

Ceramic tiles require much more effort during installation. To make such a built-in threshold on the balcony, you need quite serious preparation. The first step is to install the formwork. The threshold itself will ultimately be created based on its shape; for this it is necessary to fill its cavity cement composition and wait for it to harden. Usually this takes 20-25 hours - after that we lay the tiles on the resulting base. In this case, according to the technology, the glue is applied not to ceramics, but to cement, this is also worth taking into account. As a result, a tiled balcony threshold, due to its durability, will last for many years.

Brick - cheap and cheerful

There is an option to make a threshold by laying it out with bricks. Although this unique option is convenient with practical point vision, but not accessible to everyone. Usually it is chosen when directly installing a window unit or taking into account the interior balcony space. For example, brick texture fits perfectly into the design of the loft style, which has been gaining popularity in recent years.

It won’t be difficult to do the work yourself special labor- the main thing is to lay out the blocks evenly, applying the solution in an even layer. In the case where the threshold should form part of the masonry of the entire wall, if you lack qualifications, you should contact specialists.