Any natural fur is quite difficult to care for – it is no coincidence that it is equated with luxury items. It is generally not recommended to carry out global cleaning of fur coats, hats, collars and other fur products at home, and a more correct decision would be to visit a dry cleaner. But sometimes the contaminated area is very small, and then it is quite possible to deal with it on your own. The women's online magazine “The Beautiful Half” is ready to understand the intricacies of this process together with its readers.
How to check if your furs need a “deep” cleaning? You just need to pick up a hair dryer and direct a stream of air onto their surface. If the hairs fly away easily and freely, forming a small dimple that disappears when the air supply stops, then the fur is completely clean. But nothing like this happens, which means that a lot of dust and dirt has accumulated between the hairs, and thus they “gain weight.”
Even in the old days, small, powdery products were used to clean fur from dirt. wood sawdust or bran. No one has yet come up with a simpler and more universal method, which is also environmentally friendly. The essence of this method is simple - a layer of bran or sawdust is poured onto the fur and thoroughly rubbed into the fibers. You can do this with a brush. Then the sawdust (bran) is simply shaken off, and if necessary, this procedure is repeated several more times, tidying up fur vests or fashionable sheepskin coats.
How to clean white fur with flour and starch
In the same way, you can refresh any white fur - provided, of course, that it is natural, since similar things do not work with artificial ones. Only instead of bran and sawdust, you need to use a more delicate texture - for example, wheat flour or potato starch. Semolina is also suitable for these purposes. They say that cleaning with flour, semolina or starch will be more effective if they are preheated in a dry frying pan to a temperature of 70-80 degrees. Please note that during heating they will have to be stirred continuously, otherwise burning will not be avoided. The cleanser is applied directly to the fur while hot. This technology can be used even when cleaning products made from knitted mink, despite all their delicacy.
The magical power of blue
There is a more extreme way to clean white or any light fur: starch is mixed to a homogeneous consistency with gasoline, and then this slurry is applied to the contaminated area. Treat it with a brush. Not just any gasoline is suitable for such a task - ideally, you would need to use aviation gasoline, but where can you get it? Another “side effect” of the method is that the gasoline leaves a specific smell: the fur coat or hat will then have to spend several days on the balcony until it completely disappears.
How to clean mink fur
They say that the best remedy for mink products - for example, for a mink fur boa, fashionable in the fall-winter season 2011-2012, the bran mentioned above remains.
Grease stains from the surface of mink products are removed with gasoline - nothing more effective and less toxic chemical industry cannot offer yet. Moisten a cotton swab with gasoline and wipe the fur in the direction in which the lint grows.
If your mink coat does not yet need intensive cleaning, but has simply lost its shine, try combing it with a fine-toothed metal comb. No comb? No problem: mix regular table vinegar (or medical alcohol) with water in equal quantities, dip a sponge in this mixture and run it over the surface of the fur.
How to clean arctic fox fur
The long-haired and fluffy fur of the Arctic fox is often recommended to be cleaned with salt. A simple cleaning option is to sprinkle the fur with finely ground salt and brush it. More difficult option: three teaspoons of salt are dissolved in half a liter of water and a teaspoon is added there ammonia. Dip a clothes brush into the solution and then clean the fur with delicate movements.
P.S.: My opinion on how you can clean fur at home. You can state it in the comments to this article.
Greetings, dear readers! When the winter cold is behind us, it’s time to refresh your memory on tips on how to clean natural fur at home from yellowness and dirt. Of course, you can take your favorite fur coat or hat to the dry cleaner. But, if you have time and desire, then you can do this business yourself.
There are many ways to restore color, softness and shine to fur products. You just need to figure out which one suits you best. Having chosen the most optimal one, you should roll up your sleeves and start cleaning the fur.
Sometimes you have to clean fur items even if there is a contamination in them. clothes moth. This insect causes a lot of trouble and worry. To make the prevention and fight against this “glutton” more effective, it is worth using proven and effective methods. They are described in more detail in the article "".
How to clean real fur at home
If the flesh has lost its softness
Method 1. Sometimes, due to improper drying of a fur product, the softness of the underside of the fur, which is called the mezdra, is lost. To correct this deficiency, it is blotted with a solution prepared from 1 liter of water, 50 g of salt and 1 tbsp. spoons of vinegar essence. The moistened flesh must be carefully pulled in different directions.
This treatment is repeated after 2-3 hours. After the last use, the item needs to be dried, kneaded and lubricated with liquid fatty cream. To do this, dissolve 100 g of soap in a small volume of heated water, add 100 g fish oil, as well as 15-20 drops of ammonia. Mix everything and pour another 1 liter of water into the mixture.
The fur product is folded in half so that the inside is greased on the inside. Keep the item like this for 3-4 hours, dry at room conditions and finally knead and stretch again.
Method 2. For another method, take 1 yolk and grind it with 1 tbsp. spoon of Vaseline. Add 0.5 teaspoons of glycerin and 0.5 liters of warm water. This emulsion is used to wipe the underside of the fur. The item is dried in room conditions and kneaded.
How to remove grease stains from fur
Method 1. Contaminants of this kind are removed with a clean cloth soaked in gasoline. If the stain is still fresh and the hair pile is long, then you need to wipe in the direction of the pile. If the stain is old and the hair is short, then the movements should be against the pile.
To enhance the effect of gasoline, you can add a little washing powder to it. But at the end, wipe the fur with clean gasoline.
Method 2. There is another anti-grease method on how to clean natural fur yourself. Prepare a degreaser from ammonia (1 teaspoon) and regular salt (3 teaspoons). These substances are dissolved in 0.5 liters of water. Use this liquid to wipe the stained area.
How to clean fur using bran
At home, this method is also acceptable and often used. Rye or wheat bran must be heated to such a temperature as long as the hand can tolerate it. During heating, the bran is stirred periodically. Then the hot bran is taken and gently rubbed into the fur by hand.
If the product is large, for example a fur coat, then you should clean it section by section. If necessary, this processing is repeated. The bran is first removed with a brush, and then the item is carefully knocked out.
Bran can be replaced with fine sawdust. But you need to be sure that the sawdust taken is made from hardwood. Pine sawdust may contain resin!
How to clean fur using flour or semolina
These products are also suitable for restoring the cleanliness and shine of a fur coat, hat or collar. The fur is sprinkled with flour (or semolina) and rubbed gently. If the pile is very dirty, you can add gasoline to the flour. This mixture is rubbed against the pile, and then rubbed along the hair growth. After the procedure, the gasoline flour is shaken off and the product is knocked out. This technique sometimes needs to be repeated up to three times.
How to restore shine to fur
Walnut kernels are ground into powder and tied in double gauze. Use this bag to wipe the fur over the pile. The shine is restored due to the fact that the nut oil remains on the fibers.
After the fur items have regained their softness, shine and beauty, they can be put away for storage. All expensive fur coats require compliance with certain rules. For example, do you know how to store in summer? mink coat? If in doubt, here's some help.
How to clean faux fur
Cleaning with flour and gasoline
Fat is also removed using a mixture of potato flour and gasoline, taken in a 1:1 ratio. Before using such a product, you should try it on a small area of artificial fur, so as not to inadvertently spoil the synthetic material.
The soaked flour is rubbed into the fur, a pause is made to allow the gasoline to evaporate, and the residue is removed with a brush. For old stains, the treatment will have to be repeated several times. But such efforts are worth the effort.
How to clean fur with soap
At home, this remedy is also prepared using gasoline. To do this, bring 500 ml of water to a boil and add shavings of half a piece over very low heat. baby soap. In this case, it is necessary to constantly stir the contents.
It is important to ensure that the amount of water does not decrease due to evaporation. If this happens, then water must be added to the original volume.
Cool the soap solution and pour gasoline and water into it, 1 cup each. This gasoline soap can be stored for some time. But immediately before cleaning, you should add the same volume of water to it.
There is an exception to this technique. In particular, gasoline should not be used to clean artificial astrakhan fur. In this case, the above recipe is prepared without it.
The product is rubbed into the faux fur in the direction of the pile using a brush. The dirtiest areas are treated more thoroughly. Finally, wipe the product with a damp cloth and dry it at room temperature and comb with a sparse comb.
Important!
You cannot clean faux fur using acetone and vinegar essence.
You can also use another soap solution to restore freshness. In 1 liter hot water dissolve a tablespoon of washing powder, cool and wipe the pile with a cloth napkin. Wash off the soap solution clean water(also using a napkin or sponge). Laundry soap- Very universal remedy, it is used both for and to protect the garden from pests.
Finally, watch this informative video on how to clean your hats. Indeed, nothing is impossible - you can get rid of any trouble on your cap or hat!
I hope that the search for an answer to the question of how to clean fur will be resolved positively for you and your winter fluffy things will retain their beauty and attractiveness for a long time.
Good luck in your homework! Nadezhda Goryunova
When worn, fur products - fur coats, hats, collars - are subjected to harmful effects external environment. Over time, dust and dirt accumulate on their surface. “Salting” occurs, the fur loses its shine, and with it its spectacular appearance. appearance. In addition, contaminated fur does not retain heat well.
Experts recommend cleaning fur products at least once a year in a dry cleaner or at home. If necessary, the procedure can be performed more often. This is determined by the person’s living conditions. As a rule, things become more polluted in the city than in rural areas. Optimal time for the procedure - spring, when things are prepared for storage.
There are 2 types of cleaning:
- General.
- Local.
General cleaning involves treatment over the entire area. The product is cleaned of dirt and grime, which has a beneficial effect on its appearance. Local cleaning involves cleaning a local area.
Safety and Precautions
At home, there are 2 methods of cleaning fur:
- Mechanical.
- Chemical.
The first option is based on manually rubbing in adsorbent substances. The second involves the use chemical substances, including those potentially dangerous to humans. These include gasoline. When working with it, precautions must be taken.
- It is better to clean outside or in a well-ventilated area to avoid concentration of gasoline vapors.
- Eliminate presence nearby heating devices, open fire.
- Remove children from the desktop.
- Do not use gasoline in the evening to avoid getting poisoned by vapors while sleeping.
- Hang the fur product treated with gasoline outside until the smell disappears.
The best products for cleaning products made from natural fur
For complete cleaning outerwear from fur it is recommended to use:
- Foam rubber;
- Expanded polystyrene;
- Bentonite;
- Sawdust deciduous trees: oak, birch and others.
Petrol
A popular product is gasoline, which breaks down dirt particles and removes them from the surface. The advantages of gasoline include availability and efficiency. The main disadvantage is the sharp and bad smell, which persists for a long time. To perform proper cleaning, it is necessary to take into account the length of the pile:
- Long-haired fur is rubbed in the direction of hair growth.
- Short-haired fur is washed in any direction, but in one direction.
Sawdust
The cleaning procedure using sawdust is carried out by lightly sprinkling them with turpentine or gasoline. Sawdust should be taken clean, not rotten. 1 - 2 cups of sawdust are poured onto the fur. Using a brush, rub them over the surface.
By adding new portions of the cleaning agent, thoroughly treat the entire item. In places with a large accumulation of dirt, the manipulations are repeated 2 - 3 times. At the end of the procedure, the sawdust is removed, the product is shaken off and combed out.
Glycerol
For mild contamination, apply glycerin to the stain and wipe it off with a damp cloth after a while. If dirt has become embedded in the fur, use a proven formula: mix equal parts of vinegar, water, and pet shampoo. Wipe areas contaminated with grease or sweat with ammonia-salt solution (in a ratio of 1:3 per 0.5 liters of water) or a mixture of ammonia and denatured alcohol (in equal proportions).
Foam rubber
Heavily contaminated areas are recommended to be cleaned with foam rubber chips. Distribute it throughout the entire depth of the pile. It will absorb dirt and dust caught on the hair shaft. Large pieces of foam rubber are useful for removing surface grime. The washcloth is held in your hand and passed over the fur in the direction of hair growth. As they become dirty, the pieces are changed.
Video tips
How to clean faux fur - traditional methods and household chemicals
Faux fur is easy to clean with steam. To do this, just take a steam iron, heat it up, and direct the jet onto the dirty area. Dry the product completely at room temperature and comb the pile.
More heavy pollution will help remove carpet cleaner. It is applied to the surface and wiped off with a damp cloth after a while.
An effective home remedy is a mixture of washing powder, dishwashing gel and starch. It is rubbed into the stain and left until dry. Residues are removed with a brush.
Vinegar is contraindicated for removing stains from faux fur.
Features of cleaning light and white fur
Particular care must be taken when handling products made from light-colored skins. Please note that white fur turns yellow over time. This is especially noticeable in products made from white fox, mink, and gray astrakhan fur.
High-quality light sawdust is selected for cleaning. Good help folk remedies– semolina, potato flour, starch, talc. To enhance the effect, food products are heated to +80 C before the procedure.
At home, you can try a water-ammonia solution to remove dirt from a light-colored surface. It is sprayed over the area of the product and left until completely dry. Then the pile is combed with a brush. Blue diluted in water also helps. They moisten a rag with it and wipe the fur.
Do not use bleaches or products containing dyes.
Video instruction
There are some nuances in cleaning fur products that should not be forgotten.
- It is better to apply cleaning products to a clothes brush or to fabric (calico, flannel).
- Do not use sawdust coniferous trees. They contain resinous substances.
- After manipulation, the fur should dry at room temperature. Then it should be combed, avoiding tangling.
- It is not recommended to clean fur items stained with oils at home. Fat eats deep into the pile, and it can only be removed with the help of special chemicals.
- Do not leave dirty things for a long time without cleaning. The products become untidy, the fur loses its shine.
After the product is cleaned, the pile acquires a soft, uniform shine over the entire surface. If dull areas remain in some places, this indicates either a poorly performed procedure or wiping of the fur.
A fur coat made from otter or beaver will last you the longest: up to 20 seasons. Mink is slightly less durable: 10 seasons. Most short term service for squirrels and rabbits: 2–4 years. But with proper care, fur items can retain their shine much longer.
How to tell if your fur is dirty
Spots and yellowness are immediately visible. A test with a hairdryer will help determine the degree of general dirtiness of the item and find the most greasy areas.
Hang your fur coat on hangers and direct cold air from a hairdryer onto it. Do the fibers fly freely and then easily fall back into place? The fur is clean. If not, you need to clean it.
But first, remember that under no circumstances should you do this with fur products.
Taboo when cleaning fur
- Fur cannot be washed! If the fur (the skin that holds the fur) gets wet, it can become rough and cracked. In this case, the product becomes deformed and becomes bald.
- Fur should not be dried with a hairdryer, on a radiator or in direct sunlight! Possible only on outdoors or in a well-ventilated area.
- Fur is not allowed! Even from the inside out.
- Fur cannot be cleaned household chemicals for removing rust, washing powders with enzymes, bleaches.
Before using any other product, test it on a small, inconspicuous area of the product. For example, under the arms.
How to get rid of dust
Even in a well-closed case, a fur coat or vest can become dusty. Therefore, before storing a fur item for storage, and also before wearing it, freshen it.
Spread a damp white cotton sheet on the floor. Place the fur coat on top and beat it thoroughly, first on one side and then on the other. After that, hang it on a hanger and comb it.
If the fur is tangled and matted, spray the item warm water from a spray bottle and let dry. Then comb. The pile will fall into place. For the same purpose, you can carefully walk over the fur with a steamer.
How to restore shine to fur
To make your fur coat or collar sparkle again in the sun, treat it with a solution of lemon juice or table vinegar (not essence!).
Dilute lemon juice or table vinegar in water in a 1:1 ratio. Using a sponge or soft natural cloth, treat the fur. It is important that the sponge or rag is wrung out well. The pile should not be wetted, but rather wiped.
When the product dries, comb it. The effectiveness of this product is especially noticeable on mink.
Another way to restore shine to fur is to use walnuts. Grind the kernels, wrap them in gauze and rub the fur. The released nut oil will refresh the appearance of the product.
In most cases, the measures described - knocking it out and returning the shine - are enough to make a fur coat, hat or vest look like new. But more serious problems can arise with natural fur. It may turn yellow, become greasy, or become stained.
How to get rid of yellowness
Over time, light fur, as well as fur with white hair at the tips (silver fox, chinchilla and others) becomes yellow tint. The product immediately loses its presentability.
There are several ways to clean fur from yellowness.
- Dissolve 1 tablespoon in a glass of warm water table salt and ½ tablespoon of ammonia. Apply the solution using a well-wrung out soft cloth. Dry and comb.
- Dissolve 1 tablespoon of hydrogen peroxide in a glass of warm water. Apply the solution to the product, let dry, and comb.
- Dissolve 1 tablespoon of pet shampoo in a glass of warm water. Beat the foam and apply it to the pile using a sponge. After 5 minutes, remove the foam with a sponge or cloth soaked in clean water. Dry and comb.
Products with short pile can be wiped both with and against the wool. On long fur, cleaning agents are applied according to its growth, after which the pile can be ruffled.
When removing greasy deposits and stains, the color of natural fur is also important.
How to clean white fur
niknikpo/Depositphotos.comWith greasy and greasy spots starch, talc and semolina help fight white fur. They absorb dirt and unpleasant odors.
Take starch (semolina or talcum powder) and pour it onto the contaminated area. Using a soft brush, distribute the substance between the fibers or gently rub the fur with your hands, as if you were washing. Shake the product well to remove any residue.
The dirtier the fur, the darker the starch, talc or semolina will be. The procedure must be repeated several times until the substance stops getting dirty.
It’s even more effective if you heat starch, talc or cereal before cleaning. This can be done in a dry frying pan or in the microwave.
It is important to remove all remnants of the product, otherwise it will become food for moths. Therefore, the product can not only be shaken well, but also vacuumed with a low-power vacuum cleaner. For example, the kind that is used to clean the keyboard.
How to clean dark fur
To combat stains on dark fur, the same method is used, but with different absorbents.
- Rye bran. Suitable for coarse fur (nutria, goat, wolf).
- Sawdust. Ideal for muskrat and otter fur. But under no circumstances should you use sawdust. coniferous species wood: they contain resins.
- Sand. Copes well with dirt on the fur of moles and beavers.
How to remove stains from fur
Stains on fur clothing may have different nature and origin. For example, natural suede bags readily give off the color of fur when worn on the shoulder. You can get dirty with sauce when you eat on the run, or make a blot with a stationery pen.
You can remove stains from dark fur using gasoline (white fur will turn yellow). Refined gasoline with a high octane number. Sometimes it is applied to pure form, but more often mixed with starch or washing powder without enzymes until the consistency of sour cream. A couple of minutes after application, the mixture should be removed with a sponge soaked in clean water, and the product should be dried and combed.
Stains from light fur can be removed using acetone or alcohol, also by mixing liquids with starch or baking soda.
The stronger the dye and older spot, the more difficult it is to cope with it at home. If the above methods do not work, do not experiment: take the fur coat to.
How to care for the flesh
If you notice that the leather base of the fur product has become rough, perform the following procedure.
Dissolve a little glycerin or Vaseline with egg yolk in a liter of warm water. Wipe the product from the inside out with the resulting mixture. Gently remember and stretch the flesh. Then remove the remaining mixture and lay the item to dry inside out.
How to clean faux fur
With faux fur products, everything is simpler and more complex at the same time.
Easier because they are washable. Preferably by hand, but it can also be done in a machine using delicate mode (up to 40 degrees, up to 600 rpm) using gentle powders and without spinning.
It’s more difficult because it’s difficult to guess with a mechanical cleaning product.
Vinegar and acetone should not be used to clean faux fur.
Otherwise, you can use all the same methods as for natural fur.
Do you know other lifehacks for caring for natural and faux fur? Share them in the comments.
There are many ways to clean a fur coat at home. Which method to choose depends on the fur from which the product is made. By selecting suitable method cleaning can not only achieve the best effect, but also prevent damage to an expensive product.
Cleaning fur depends on the type of fur
The table below shows the wear characteristics of various furs. When purchasing a product, you should take this point into account, since the lower this indicator, the more often you will have to clean it at home or seek dry cleaning services. Processing fur too often will also not have a good effect on the condition of the product.
Fur coats made from natural arctic fox fur are very popular due to their attractive appearance and relative ease of care. If you notice that the product has lost its former luster and requires cleaning, it is recommended to use the following methods:
- Add 1 tsp to 500 ml of warm water. ammonia and 1 tsp. detergent. After mixing all the ingredients, moisten a sponge in the resulting solution and treat the entire surface of the pile. Next, you need to take a clean sponge, moisten it in plain water and remove any remaining detergent. To speed up the drying process, wipe it several times with a paper or waffle towel.
- Soak a cotton swab in a weak ammonia solution. Using it, you should walk along the entire length of the pile. The resulting solution can be poured into a regular spray bottle and sprayed. After this treatment, the fur coat is thoroughly wiped with paper towels, trying to remove as much moisture as possible.
- You can find recommendations for cleaning Arctic foxes using semolina and starch. But this method Not applicable for every product. Its essence is to scatter starch or cereal over the surface of the pile and slightly crush the product with your hands. Then, vigorously shaking the product, remove as much starch and grain as possible. After this, use a vacuum cleaner to clean the remaining grains and powder from the fur coat.
These methods are excellent for both local removal of contamination and for treating the entire surface. It is necessary to dry a fox fur coat on hangers in a well-ventilated area without the use of additional heating devices and gas ovens. The drying process must take place naturally and speeding it up is highly not recommended.
Cleaning Arctic fox fur is quite simple.
You can restore the shine of arctic fox fur using a cotton swab dipped in a vinegar solution. If the Arctic fox is shorn, then the swab is moved against the direction of the pile. Processing of long fur is carried out in the direction of their growth. You can cope with the manifestations of yellowness with the help of hydrogen peroxide. Residues of peroxide must be removed with a sponge soaked in clean water.
The methods of cleaning a silver fox are very similar to how the arctic fox is cared for. Silver fox fur responds well to products such as hair shampoo, pet shampoo, peroxide and vinegar. You will need to prepare a weakly concentrated solution of one of the listed products and soak cotton wool in it. Divide a moistened piece of cotton wool into fibers and wrap them around the comb. Next, carefully comb the pile along its entire length and remove any remaining substance with a damp, clean sponge.
Caring for silver fox fur is similar to the methods for caring for arctic fox fur.
The cleaning method with semolina and starch, which is used in the case of the Arctic fox, is also applicable for the silver fox.
Mink cleaning
At home, dry and wet cleaning methods are suitable for removing dirt. For dry cleaning, the product is sprinkled big amount talc and press it slightly onto the pile. Next, talc is dusted off the fur coat and the residue is removed using a vacuum cleaner.
Many housewives use talc as an absorbent, since it does not attract moths. Semolina and starch are dangerous precisely because unexpected guests can get into the fur coat.
For wet method you will need to mix water, 9% vinegar and medical alcohol in equal proportions. A clothes brush is dipped in the resulting mixture, the excess is shaken off and brushed in the direction of the pile. When all the fur has been processed in this way, wipe the fur coat with paper towels and leave to dry completely at room temperature.
Glossy sleeves or collars can be cleaned well using a mixture of salt, ammonia and water. By dipping a cotton swab or a clean piece of cloth in the resulting mixture, you can tidy up contaminated areas.
Rabbit fur is especially sensitive to precipitation, high humidity and mechanical impact. Lack of proper care for the product will lead to the fact that the fur coat will last a couple of seasons, after which even dry cleaning will not be able to put it in order. To prevent this from happening, you can clean dirt from the pile using the following methods:
- a combination of peroxide and ammonia. Pour 1 tsp into 250 ml of water. peroxide and a couple of drops of ammonia. Pour the mixture into a container with a spray bottle and spray it on the fur coat, then leave it to dry for a day in the sun;
- simple stains can be easily cleaned with a mixture of alcohol, vinegar and water. All components must be taken in equal parts. Lightly moisten a sponge in the solution and gently apply it to the stain. After this, the fur should be blotted with a dry cloth;
- The dust that has settled on the fur coat can simply be knocked out. It is recommended to first wrap the item in a damp sheet. Then, during knocking out, dust particles will settle on the wet barrier.
Rabbit fur is quite difficult to care for, so take care of your fur coat so that it lasts you a long time.
To carry out these procedures, it is best to choose a day off so as not to rush and thoroughly clean the entire pile. It is equally important to make sure that the fur coat is completely dry and there are no wet areas on its surface.
White fur certainly looks amazing, but its significant drawback is that it is easily soiled. A fur coat made of white pile is not the most the best choice for everyday wear. It is more suitable for going out to a restaurant or theater. To maintain the impeccable whiteness and neat appearance of the item, you must use the following recommendations:
- To restore the whiteness of the pile, you will need to purchase hardwood sawdust from a pet store and soak it in a small amount of gasoline. Sawdust is poured onto the surface of the pile, rubbing between the palms. When the sawdust absorbs dirt, the white fur is combed and the remaining sawdust is removed.
- A solution of soda and alcohol to restore lint. The mixture is prepared in a ratio of 1:3. A clean sponge is lightly moistened with liquid and the mixture is applied in the direction of the pile.
- High-quality pet shampoos can quickly remove dust and dirt particles. They will restore the neat appearance and whiteness of a grayed product. A small amount of shampoo is dissolved in water, then the soap solution is distributed over the pile using a sponge. To remove shampoo residue, use a clean piece of cloth.
A white fur coat is a big responsibility. This product cannot be called practical, but it looks impressive. The owner of such a purchase must carefully monitor the condition of the fur and clean it at the first sign of greasy or dirty fur.
A white fur coat is a very impractical, but incredibly beautiful thing
Cleaning a fur coat at home is suitable for light stains that do not require the use of professional equipment and detergents. If a stain that is difficult to remove has formed on the surface of the product, for example, from wine, fatty sauces or other food, you should not put off going to the dry cleaner. The longer the dirt remains on the fur coat, the deeper it penetrates into the pile and it will be more difficult to clean it.
Basic rules for caring for fur products
The following rules are intended to increase the service life of the product, maintain its presentable appearance and thermal insulation properties. You don’t have to worry if your natural fur coat has lost its luster after winter. It is enough to treat the pile with a mixture of vinegar, peroxide and water. The main thing is that the concentration of such a product does not harm the product.
Fur matted after summer storage can be easily and quickly straightened and fluffed by simply combing the pile with a brush dipped in a vinegar solution. To prevent fur jamming in the future, the item is first thoroughly dried in a well-ventilated area, away from direct sun rays. To remove particles of dust and dirt, the fur coat is lightly knocked out and carefully placed in paper bags. When stored in a closet, a fur coat with dyed fur should not come into contact with an undyed product.
You can maintain the neat appearance of a fur product and reduce the need for premature washing of the item if you use perfume before putting on a fur coat. Extreme care should also be taken with cosmetics. To avoid staining your collar with foundation, it is best to throw a scarf around your neck. It will serve as an improvised barrier to protect the fur from staining.
Knowing how to clean a fur coat at home, you can independently carry out high-quality removal of stains, stubborn dirt, traces of drinks and cosmetics. Thanks to proper care after the product, the pile remains fluffy, soft and pleasant to the touch.
