The legendary machine gun of all times - AK 47 made of paper.
Well, it’s time to arm yourself with a worthy weapon, the pride of our vast homeland - the AK 47 assault rifle (Kalashnikov assault rifle). You have the opportunity to glue together a deadly AK 47 with your own hands and put the entire dean’s office, school, office, neighbors on their ears... emphasize what is necessary. And if the machine is further strengthened and painted, then it will be an absolute blast!
A paper development of an AK 47 assault rifle takes 10 pages in pepakura and is not so difficult to assemble compared to its analogues. Although there is something to bend over with tweezers at the ready. This copy is a must-have for all weapon connoisseurs.
We are glad to present you another version of the Kalashnikov assault rifle made from paper. This time it came to us from Call of Duty 4: Modern Warfare. The model has its own characteristics and is even visually slightly different from the first version. It takes up 12 pages, but is 7 cm shorter than the first one. For many, making this version of the Kalashnikov assault rifle with your own hands will not only be easier, but also better due to the good textures.
Weapons fascinate any boy. The young master will be very interested in learning how to make a machine gun out of paper. The process is also very interesting because it is possible to find out what main parts this type of weapon consists of.
Master class: how to make a paper machine
In order to make a machine out of paper, we will need several A4 sheets, scissors, tape and a little patience. Roll two sheets of paper, placed on top of each other, into a tube with a diameter of about 8 cm. To prevent it from unfolding, secure it with tape.
From this pipe we will make the body of the machine gun. Let's make corner folds along the length and give the pipe a rectangular shape. Using scissors, we make a bevel in the upper left part and cut out a window on the side for the shutter lever.
From a sheet folded in half lengthwise, we roll up a tube with a diameter slightly larger than the thickness of the body and flatten it so that these dimensions are equal. We will make oblique cuts in one direction at both ends of the tube. The result is a pistol grip. From a strip of paper folded several times we will make a safety bracket and a trigger, as shown in the figure. We secure all three parts to the body using tape.
Let's make a shutter. Roll a sheet of paper lengthwise into a tube with a diameter of 2 cm. In the center, onto the tube we will glue a small piece of sheet folded in half, the height equal to the height of the machine body, and the length such that when applied it covers the cut-out window in the side of the body. We attach a short strip bent at a right angle to this bar with tape. This is the shutter lever. Let's place the shutter inside the body, as shown in the figure. The lever should be exposed to the window. Cover the back of the case with a strip of paper and secure it with tape.
Let's roll a tube from the sheet with a diameter slightly larger than the shutter. This will be the trunk. Divide another similarly rolled tube in half. Let's stack the short tubes one on top of the other and attach both with tape to the back of the barrel. Let's make a handguard so you can hold on to it when shooting without fear of getting burned on the hot barrel. To do this, we roll up a pipe of such a diameter that three fastened tubes fit tightly into it. We will make slots on the sides to cool the barrel.
Once again we will roll up a tube with a diameter of 2 cm. Cut off a small part from it with oblique cuts. From these parts we will make a gas outlet tube, allowing the machine gun to fire bursts. We put the forend on three fastened tubes, and attach the gas tube to the barrel with tape.
We will make a front sight from a sheet rolled into a cone and attach it to the end of the barrel with tape. Let's connect the two main parts together. To do this, we put the barrel on the bolt, and insert the forend into the body and secure it in a circle with tape. To load the machine gun, you need to pull the bolt back by the lever and return it to its original position.
Let's make a magazine for cartridges. We fold the sheet along the width and give it folds rectangular shape. Cut it crosswise into several pieces. We put each part with its upper corner into the previous one. We will fasten all parts with tape.
We attach the magazine with tape to the body. So the machine was made using simple origami techniques.
Boldly go into battle!
How to make an AK-47 from a garden shovel aslan wrote in February 11th, 2017
In Russia there have always been craftsmen who surprised the world with their skills and inventions. We are especially good at making weapons. So Izhevsk master Mikhail Kalashnikov created the legendary AK-47 assault rifle, which inspired another master to build a copy of it from a simple garden shovel and iron pipes.
And by the way, this is not a Russian craftsman at all.
On the left in the photo, by the way, is the same machine gun made from a shovel, and on the right is the Dragunov sniper rifle (SVD).
But we are getting ahead of ourselves.
The master who made this is from the USA. He was once driving past a store with gardening tools, I saw a shovel there and decided to buy it. This was the best deal he could get for $2, he thought.
The handle of the shovel, by the way, later turned into a butt and is surprisingly quite comfortable.
I decided to try the stock on an old Kalash. The cat looks in bewilderment, is the owner drunk again?
I cut off a tray from a shovel; the machine body will be made from it.
I roasted it well on the fire.
Now you need to level this sheet of iron.
We bend the sheet and drill holes.
On the left is a detail from a real Kalash, on the right is from a future one.
Specialists, of whom there are always many, will tell you in the comments what kind of detail it is.
More details.
We weld
It was the turn of the barrel, you could buy the original for 200 bucks, but they preferred the economy option for 30 bucks.
Below in the photo is the upper barrel from a real Kalash, in the middle is a ready-made factory version of the barrel and a third, collective farm version - our choice.
We process the trunk.
Let's try it on.
Let's finish the details.
We weld parts from a real machine gun.
There is very little left.
We drill a hole to remove gases.
We try on the magazine and the butt of the shovel, everything seems to fit!
What's most surprising is that he shoots, and the bullets fall quite close together.
After 60 rounds the barrel got a little hot, but my homemade AK-47 performed quite well.
Total at minimum costs we get pretty good, combat-ready weapons. Thanks to Mikhail Kalashnikov for his great invention!
If you have anything to add, dear weapons experts, please comment.
Those who provoke srach about Russia, Ukraine and Putin are banned without warning.
Click the button to subscribe to "How it's Made"!
If you have a production or service that you want to tell our readers about, write to Aslan ( [email protected] ) and we will make the best report that will be seen not only by readers of the community, but also of the site How it's done
Also subscribe to our groups in Facebook, VKontakte,classmates and in Google+plus, where the most interesting things from the community will be posted, plus materials that are not here and videos about how things work in our world.
Our channels on YouTube
How it's done - https://goo.gl/fy5MFe
How it was done - https://goo.gl/8YGIvl
Jean Peugeot - https://goo.gl/L88mip
Subscribe to our community on LiveJournal -
Games can be used not only for entertainment, but also for development. It is for this purpose that very often parents and children make toys and various crafts with your own hands - panels, paintings, airplanes, weapons, doll houses and much more. This helps develop imagination, fine motor skills and visual-figurative thinking in children. They treat such toys more carefully.
Paper is universal material, you can make almost any craft from it, even a machine gun, and you will find out exactly how in our article.
How to make a machine from paper?
You will need:
- colored paper;
- scissors;
- glue;
- scotch.
Progress:
- We make 5 tubes with a diameter of 1-2 cm from paper different colors. To prevent them from unfolding, we seal their ends with glue.
- We attach one more to two of them in continuation. We shorten the blue one by 5-7 cm.
- We take a sheet of blue paper, wrap it around three tubes folded side by side, so that they move smoothly, and secure it.
- We cut off the excess paper and make a rectangle out of it.
- On the upper side of the resulting box, cut a rectangular hole to the middle.
- And on the brown part of one of the tubes we make a hole so that it is located in the second half of the box. We connect the double parts together with tape.
- On the side where the hole is made in the box, glue a small (up to 5 cm) lever to the middle tube located inside it.
- We make the following tubular parts from colored paper.
- We attach the long parts to the outer tubes located in the box.
- From the rest we make a stock and a sight, connecting them with transparent tape.
- We make a rectangular box with an open top out of blue paper and attach it to the lower tube of the butt.
- We attach a long one to the middle tube, and then a small funnel to it.
- Cut out a rectangle from brown paper and twist it as follows. These will be bullets.
- The machine gun and shells are ready.
But the question immediately arises: how to shoot from it? It’s simple: we put the cartridge into the hole made in the middle tube, closes the gap by pushing it forward by the lever. Then we blow with all our might into a funnel made near the butt.
