It's no secret that today almost any product for garden plot They are not cheap in stores. So, for example, purchasing various accessories will cost, as they say, “a pretty penny.” And if you make them from scratch, you will spend no less, because you still have to buy the raw materials.
So why not save money and organize homemade projects for the garden with your own hands from what you usually have on hand or is inexpensive? Moreover, everything can be done really beautifully and neatly. And in addition it is also functional.
In this article we will look at the most useful homemade products with your own hands for the cottage and garden, which are distinguished by their simplicity and originality.
Beautiful “useful things” for the garden
One thing worth noting important point- you need to understand that only a small part of the list of crafts that can be made will be sorted out. It’s just that these options are like a start, a “push” for imagination.
After all, here it is important to understand the very principle of how simple it is to organize everything, and then everything depends only on your imagination. So, let's begin the review.
Pond from an old bathtub
If you make a small reservoir of this type on a site, it will perform several functions simultaneously - we will familiarize ourselves with them in the table below.
Agree, the task is worth implementing. Moreover, all you need for this is an old bathtub, which in most cases is available on the site.
The pond is made according to this scheme:
- We dig a hole with our own hands in the right place, which in its parameters should be slightly larger than the dimensions of the bathtub.
Advice: be as responsible as possible when choosing a location.
It is not advisable to place a pond too close to dining table, For example.
The fact is that they can periodically fly to the water various midges, bees, etc.
And brushing away insects during lunch is not very pleasant, as you understand.
- We lay several boards at the bottom of the hole– the bathtub will stand on them.
- We insert the bathtub into the hole and level it. We close its drain hole with a plug. In this case, it is advisable to treat the outer edges of the cork with silicone to prevent water leakage from the container in the future.
- We fill all the free space between the metal and the soil with earth.
Well, then all that remains is to decorate the structure. To do this, you can lay out beautiful stones around the perimeter or, for example, plant flowers. In addition, you can create an edging from boards or any wooden sheets or panels that are more or less resistant to moisture.
As for filling the container, you can use both water from the central water supply and natural flows. For example, you can bring the edge of the gutter to the bathtub drainage system houses and the pond will be filled with rainwater.
In principle, such homemade products for the garden can be slightly adjusted - use any tank, barrel, etc. instead of a bathtub.
Now let's look at another very convenient craft.
Pallet bench
Surely at some point you will want to sit in the garden - near artificial pond, For example. And then you will need one like this useful design like a bench.
Purchasing a new product is expensive. It is much easier to make a bench from a pallet - if it is not available, then, as a rule, a considerable amount of it is thrown away near large warehouses and factories.
The bench is made quickly.
- Make a cross cut on one side of the pallet to the left of the reinforcement bars.
- On the other side, perform exactly the same operation, only on the other side of the bars.
- We divide the product into two parts.
- We insert blocks of bars between the boards, as shown in the figure below. We get the back and seat.
- We fasten the wood with self-tapping screws at all connecting points.
- Remaining wooden elements put them under the seat and use them to adjust the height.
As you can see, everything is quite simple. Now you can paint the bench and install other homemade items for the garden and dacha.
Now let's look at a very functional, original and cheap craft.
A hanger is a very necessary element. After all, you can hang not only clothes on it, but also a considerable part of various garden tools.
Of course, the “primitive” version of this design is ordinary nails or self-tapping screws. However, it looks rather unattractive, and besides, the nails tend to gradually loosen inside the holes into which they are driven.
And loosening means that such “hooks” will periodically fall to the ground. We offer a more original and reliable solution - to make a hanger from an old rake.
You only need the metal part, without the wooden handle. Even if such an element is not available in barns, purchasing it at the nearest market is not a problem. The price of the rake is acceptable for everyone.
The hanger is mounted like this:
- We tie the wire to the two edges of the line on which the teeth are attached. In this case, there should be only one piece of wire. That is, it turns out that the fastener, in fact, resembles how paintings or mirrors are hung on a string.
- On the wall or anywhere Right place drive in big nail and hang a rake on it.
The hanger is ready - you can hang anything you like on the rake teeth: shovels, caps, etc.
Now let's apply old shoes, which is usually a lot at the dacha.
Flower pots made from shoes
The ideal option is to have rubber boots, but in principle, regular leather shoes will do.
From such shoes you can make custom flower pots that will fit perfectly into the style of almost any garden.
The workflow here is like this:
- We nail or screw the boots to the fence or any other suitable plane.
- We fill each boot with soil.
- We make several holes in the soles - they are needed to let out excess water.
- Plant flowers in pots and enjoy appearance inventions.
Note!
Any DIY garden crafts can be “improved” ad infinitum.
The main thing in this matter is to correctly organize the “basic” thought, idea.
And you can decorate the invention with anything and however your heart desires - there are no restrictions.
Remember this simple rule when planning “benefits” for your garden or vegetable garden.
This concludes our review of useful and original crafts for a garden plot and summarize the article.
Conclusion
As you can see, gardener’s homemade products are quite simple, and they can be made from almost anything. We hope that this article will become a catalyst for your ideas and you will be able to decorate your area beautifully. Well, if you want more information on this topic, we recommend watching the video in this article.
DIY drawings for a summer house and vegetable garden will be useful to everyone. A dacha is the ultimate dream of, if not every average person, then certainly every second person. Not everyone, of course, will be lucky enough to become the owner of suburban area, but those who are still lucky need to constantly monitor and improve it, which requires considerable expenses. Do-it-yourself homemade products for your dacha and garden help you keep your dacha in impeccable condition. Today we will tell you a few secrets on how to save money on buying the necessary things for your garden and make them at home. Of course, not everyone can make a grader with their own hands or self-propelled guns for a tractor, but most of the homemade products will definitely come in handy on the farm.
Do-it-yourself variator for a machine
If you need to constantly work at the machine, then frequent changes in speeds lead to wear on the unit and have the additional disadvantage of regularly stopping the device. As alternative option you can use a homemade variator for the machine. It can be made from wood with your own hands, without significant investment of time and money. The variator cones are made from hard wood, and you don’t have to use a lathe to make them; you can cut them at an angle using a jigsaw, equal to the angle cone inclination.
If you assemble a cone from disks, then you must glue them together or nail them. The finished cones are seated deep on metal rods and secured with screws. In order for the belt to move evenly on the machine, roller guides are required. The rollers can be taken from furniture fittings, but if they are not available, you can use ordinary bearings.
An old washing machine is a real treasure
If there is a working engine from washing machine, then this is a very valuable find, since many useful household devices can be made from it. The easiest way is to use an engine from a washing machine to make an excellent sandpaper for sharpening knives, different instruments and drills.
The main problem in making the device is attaching the sharpening stone to the engine body itself. In most cases, the whetstone has a hole that does not fit the motor shaft. That is why you need to make a flange that, on the one hand, can be pressed onto the shaft, and on the other, will have a thread, which will allow it to be screwed in and secured grinding wheel.
Image 1. Making emery from an old washing machine engine.
Experienced craftsmen recommend that beginners use old pieces of pipe 32 mm long and no more than 20 cm long as a flange. On one piece of pipe we make a thread whose length should be 2 times the thickness of the grinding wheel. The other end of the pipe is heated with a soldering iron and placed on the shaft. To better hold the pipe, it can be bolted together. After this, take 3 nuts and screw them onto the flange from the thread side until it stops, then put on the washer and, finally, the grinding wheel, then the washer again, and secure with a nut. At the end you can also add a lock nut.
The hardest work is done, after that all that remains is to fasten the motor, but this is a very individual procedure, since it is not known what holes are available on the motor from your washing machine for fasteners. Based on them, you need to make a stand; it is best to use small corners, fastening them together and placing the emery on the workbench. The final step will be connecting the engine to the electrical network. Look at ready-made option You can see the sharpeners in the photo, drawings are also included (image 1).
Image 2. Grill from a washing machine drum.Homemade items for the dacha can also be made from other parts of the machine; for example, a drum can make an excellent kebab maker. The drum in washing machines is made of stainless steel, which in itself is important, since the body is very strong and reliable. It’s very easy to make homemade items for a summer house from a drum; you just need to remove it from the machine body, but together with the shaft and pulley. We put the pulled out drum with the hatch on top and the wheel down. Now the brazier is ready, with the help of a grinder you can, of course, trim the front of the drum or the sides to make it more convenient to throw firewood, but here everything depends on your free time and imagination. This makeshift brazier looks very neat, with the drum dotted with small holes, which allows air to be evenly distributed over the coals and provide the necessary heat (image 2).
Hand-held circular saw from a grinder
Image 3. Device diagram circular saw.The circular at the dacha is very useful thing, few people know, but it can be made from a grinder. You only have 2 elements left to complete: the sliding stop and the axial handle. After this, you will be able to use your circular saw from an angle grinder at any time.
2 small pieces will serve as a sliding stop metal corner. The edges of the corner are rounded so that they do not catch the part during processing. The corners are connected to each other at the back and front using bolts or nuts. A clamp made of metal tape must be placed on the body of the above-mentioned power tool. A folded strip of sheet metal or galvanized steel with a hole for the rear bolt of the sliding stop is attached to the screw tie of the clamp, which will be located below.
In the grinder gearbox we make 4 small holes for M5 bolts. For convenience, the gearbox can first be disassembled to better see where the hole can be made. These 4 holes are needed to attach the handle. The handle can be made from an ordinary metal tube. On this manual option grinder saw is finished if you want to make a real one stationary option circular saw, then you will need more skills in work, tools and well-calculated drawings (image 3).
Agricultural equipment and devices
Agricultural machinery is very important tools in the country, without which not a single owner can do. Agricultural equipment today costs a lot, and you don’t really want to spend a lot of money on something that is rarely used, but at the same time you can’t do without it. One of the most popular devices is a wheelbarrow; it can be made from improvised means, thereby saving a lot of money. To make it you need:
Image 4. Drawings of a homemade cart.- wheel, preferably made of rubber;
- plywood;
- 2 corners;
- wooden block, 3 m long;
- nuts and axle from a bolt.
The method for making this tool for the garden is very simple and will be understandable even to a novice craftsman; the main thing here is to measure everything clearly, because if you do it by eye, it will turn out crooked. Drawings of the wheelbarrow are attached (image 4).
No less popular tool for summer cottage, which in winter time will help get rid of snow, that is, a shovel can also be made from plywood. You will need:
- plywood 10-12 mm thick;
- wooden stalk;
- nails;
- steel plate 4-6 cm wide.
The plywood will serve as a shovel bucket, and the timber will allow you to hold the handle. Metal is used to edge the front and back parts of the plywood - the future bucket.
To cultivate a garden, a rake is often required. To make them you will need a wooden block 35 by 35 mm. The length of the handle can be adjusted at your discretion, but it is not recommended to make it too long, as it will be difficult to use. In addition to the bar and handle, you need to make at least 4 metal teeth. The metal must be strong so that it does not bend to the ground during operation. You can use metal from an old shovel and cut the teeth with a grinder. The teeth are aligned with a hammer and holes are drilled for the screws. Then the structure is fastened.
Video about making a cart with your own hands:
Design of a sprinkler for a vegetable garden
Homemade agricultural equipment also includes sprinklers for the garden, which can be made practically from waste that is found in everyone’s home. To irrigate your garden you will need:
- spray;
- rubber hose 3-4 m long;
- plastic one and a half liter bottle;
- pump;
- a wooden or metal stick of any length, but the longer the better.
The sprayer is screwed to the stick with the top nozzle so that the lever is pressed using nylon threads. Wrap it tightly so that the sprayer does not move. After that we take plastic bottle and using a hot nail, melt a hole in the neck. Then we push the bolt into the molten hole and secure it with a nut on the outside.
Before inserting the bolt, drill a through hole in it with a simple 3 mm metal drill. The hose is put on the bolt and secured with a small clamp using a screwdriver. We attach the second end of the hose to the pump and again secure it with a clamp so that everything is sealed.
The bottle contains poison for spraying beetles or water for watering crops. Screw the container to the top of the spray bottle, which is attached to a stick. Next, with the nozzle closed, we pump up the pump a little, after that we unwind the nozzle, and the sprayer starts working. In this way, you can spray trees of any height and large beds; if necessary, you can simply place the device on the ground and pump up the pump from time to time.
You can even do it at the dacha small greenhouses made of film, you only need to drive a metal rod or stick into the ground and secure it to the base plastic film in the form of a cone.
Video about the system drip irrigation using a plastic bottle:
The film is secured from below in a circle from old barrel or adjusted with stones.
Conclusion on the topic
Now you know how to make expensive tools for a summer cottage without significant expenditure of money, time and nerves. The main thing is not what you use to improve your plot, but that you should like the work and being at the dacha should bring joy.
Summer is the time when most people, escaping the bustle of the city, want to go out into nature. Probably every resident of a stuffy metropolis is familiar with the picture when train stations and commuter trains are filled to capacity with people who want to get out of the stuffy city closer to nature, to their country estates, where they can relax their soul and body, and also engage in useful work. For most people, a dacha is not just a place where you can relax, because this is where you can engage in gardening, growing vegetables and other crops, and also realize your potential as a landscape designer! And, do-it-yourself homemade products for your home and garden on our website will help you with this.
Thus, it becomes clear that a dacha is not a simple place to relax from the bustle of the city, because for an experienced summer resident There is always something interesting to do, for example: DIY garden crafts. Among creative, enterprising and resourceful people, there is an opinion that sitting around doing nothing is a waste of time. It is for this category of “workaholics” that homemade products for the garden and garden with their own hands are not only a way to pass the time and improve own plot without extra costs, but also an excellent method for realizing your hidden potential.
The section “DIY crafts for the dacha and garden” is intended for people who believe that the dacha is intended not only for relaxation, but also for active and generally useful work. Crafts for home and garden, which are presented in this section of our portal, can be easily made with your own hands from improvised means present in the arsenal of every experienced summer resident. Who would have imagined that even ordinary dacha garbage could turn into a real masterpiece of modern “dacha” culture!
In order to make the homemade products for the cottage and garden presented in the section, it is enough to have a standard set of tools and out-of-the-box thinking, a desire to do something useful, as well as minimal skills in reading blueprints and following instructions. Country crafts made from scrap materials and construction waste are one of the most tempting options for saving extra money that can be spent on something more substantial. Moreover, the money saved can be used to improve a suburban area or arrange a workplace to create new crafts.
Thus, it becomes clear that with minimal ability to work with their hands and understand drawings, anyone can afford to create anything for their dacha: build and decorate the house or cabin itself, develop their own unique elements interior or decorate old furniture, make an impromptu bath or steam room. And with a well-functioning imagination, you can create decorations for the garden or vegetable garden, organize homemade system automatic watering the same garden, and also protect the vegetables growing on it from pests. And all this, do-it-yourself homemade products for the dacha.
In this way, you can be convinced that the dacha, in itself, is a blank canvas on which a skilled worker, like a real artist, can realize a huge number of useful things and creative ideas. Moreover, if “dacha” creativity and physical labor using the brain brings pleasure, special pleasure. Yes, and the realization that this or that functional device was made with your own hands, at minimal monetary costs, you must admit, cannot but warm the soul.
In essence, a dacha is a piece of personal space where you can safely try to realize your most daring and extraordinary ideas, without fear of getting into an awkward situation. And the very fact that such crafts can save you from unnecessary costs for purchasing expensive garden equipment or expensive decorations for the site, it simply cannot help but warm the soul. In the section "useful homemade products for the garden with your own hands", the editors of our portal have collected the most daring and unusual design solutions And functional ideas, which can form the basis for a unique and inimitable development of one or another addition to the site using your own ingenuity. Build a playground? Easily! Do you need a greenhouse or greenhouse to grow vegetables, but don’t have extra funds? You can assemble them yourself! Expensive fencing can cause harm family budget? No problem! With the help of interesting ideas posted on our portal, these problems can be solved absolutely free of charge!
Thus, the old motivating slogan “If you want to do something well, do it YOURSELF” is gaining more and more relevance. After all, if you can do something yourself, then why go to the store for it and spend extra money that may be useful in the future? If you have a certain amount of knowledge, unnecessary trash can turn into a multifunctional device or an excellent addition to country interior or garden design.
Doing something with your own hands is not only pleasant, but also extremely useful, because, as you know, a developed person must be developed in everything. And when work brings pleasure, then doing something will not be difficult! Have a pleasant and productive holiday, summer residents! We hope that our homemade products for the garden and at home will help you in your household.
Do-it-yourself homemade products for your garden and garden not only perfectly complement your garden plot, but will also help you save a decent amount of money. Today there are many useful devices for the garden, simplifying daily life. Usually, a large number of unnecessary things and materials that people do not use in their apartments are collected at the dacha. it takes up a lot of space. Any summer resident has the opportunity, using his imagination, to make simple homemade items.
Garden tools
When visiting hardware stores, many buyers note that the quality of garden tools does not correspond to their cost. Even an expensive and high-quality shovel is very easy to damage. One option is to personally make some kind of country tool that can perfectly replace a regular bayonet shovel. for example, a garden digger, which is not only very easy to make, but also easy to use. If we compare an ordinary shovel and this country tool, it can be noted that it is much easier for the second to dig the ground, and it does not place heavy loads on the human spine.
To make a digger for the garden with your own hands, you need those items that often lie and gather dust in the country. Must have:
- metal sheet 2 mm thick;
- metal pipe 0.5 inches in diameter;
- 2 bolts and 2 nuts;
- 2 engraver washers for the bolts and 2 hours of free time.
Needs to be cut a metal sheet into 7 segments, similar to stakes. That is, you should get a stake that is wide on one side and tapering to the other. Then, take a pipe 43 cm long and measure 5 mm from the edge. The following marks are made every 6 cm. Another 5 mm should remain on the other edge of the pipe, which should also be marked. Using a grinding disc on a grinder, you need to make cuts in the marked places to the middle of the pipe.
The cut stakes are taken (they will act as legs), inserted into the grooves cut in the pipe and secured by welding. The remaining pipes are then welded into a U-shaped handle and bolted to the workpiece. That's all, the digger is ready to use.
Garden decoration
Don't forget about the opportunity to become a designer own garden in the country. After all, you can make not only country tools, but also much more. And to add some zest country house, you can post a beautiful and original garden path made of stone. Such a path will not only delight its owners, but will also become the latest trend, very popular among summer residents. For a stone path you will need:
- stone used to lay out the path;
- sand;
- gravel and board 25-30 mm thick.
Work should start with preliminary measurement distances of the future track. To do this, four pegs are driven in and connected in pairs with a guide rope. Afterwards, you need to remove upper layer soil, or in other words, dig a trench. When working with a shovel, one should not forget about the level of the trench, since it is better to make it even in depth. This will help not only to use correctly and economically Construction Materials, but will also simplify subsequent work. You need to install boards along the edges of the trench; they will act as sides into which sand and stones are placed.
First of all, gravel should be poured into the bottom of the hole. It will not only perform a shock-absorbing function, but will also provide indispensable assistance with drainage groundwater. Next, the gravel is covered with sand, which should be moistened in advance - this way it will lie more tightly. It is best to make a sand cushion with a thickness of 10 cm, and then you need to level the surface of the embankment with a board. Only after this can stone or paving stones be laid. It is necessary to calculate the thickness of the future path in advance so that you do not have to cut the stone again.
Mosquito traps
The invention fights not mosquitoes, but their larvae. It is suspended from tree branches. Mosquitoes lay their offspring in this device, which prevents the newly born mosquitoes from leaving it. For more effective fight with bloodsuckers you should make as many of these traps as possible. But even the use of this gadget cannot provide 100% protection from mosquito bites.
One of the most simple ways- This is to use an ordinary plastic bottle as a trap. You need to cut off the upper part with the neck and insert it into the lower part so that the neck does not touch the bottom. Next, you should prepare a special solution that will attract mosquitoes. To do this you will need 15 g of yeast, 45 g of sugar and warm water. All 3 components need to be mixed and the resulting solution poured into the trap. Then, the bottle must be darkened. To do this, you can use a dark cloth or thick paper. This trap can attract not only mosquitoes, but also cockroaches. Therefore, the owners of a house in the village have the opportunity to use it in their living space.
These were just 3 of the most interesting and easily made devices for the garden and garden. Do not forget that a person can create something more useful and unique from available materials, you just need to give freedom to your imagination.
Interesting homemade products for the dacha are waiting for you in this article. You will learn how to make a lawn mower from an old washing machine, make a sink, country shower, dryer made from scrap materials.
Useful homemade products for the garden - do-it-yourself washing
Not everyone has the financial opportunity to buy a Karcher car. If you can't buy it, then why not invent it? Homemade sink will allow you to do without running water, reduce water consumption and thoroughly wash your car, fence, garden path or other objects.
Here's what you'll need for this homemade garden project:
- plastic canister with a capacity of 5–20 l;
- hose connector kit;
- automobile nipple;
- a piece of hose;
- silicone sealant;
- sharp knife;
- compressor or car pump;
- watering gun.
Take a set of hose attachments, which includes 2 connectors, a 3/4 threaded fitting, and a 1/2 adapter.
Here is the principle of operation of such a homemade product for the dacha: you connect the gun to a hose, attach this device to the bottom of the canister. A nipple will be built into its neck.
Fill the container with water, but not to the top. Then screw on the lid and pump air inside. Pressure will be created here, and the water will flow well when you pull the trigger of the gun. Here's how to assemble such a mini-wash.
Using the tip of a knife, carefully cut a hole in the lid. It should be slightly smaller than the diameter of the nipple leg. Also cut a circle required diameter at the bottom of the side of the canister.
Insert the nipple into the cover.
Now, helping yourself with the wire, place the coupling in the hole intended for it. Apply silicone sealant to secure the connection between the coupling and the canister.
It is necessary to tighten the lid and carry out other work only after the sealant has completely hardened. Then you will connect one end of the hose to the water gun and the other to the canister.
Pour water into the container, but not to the top, so that there is room for pumping air. But do not pump too much, so that the canister does not deform or burst under pressure. Look at how the fitting should be tightened and the connectors installed.
If everything is done correctly, then when you press the trigger of the water pistol, the water will shoot out in a good stream. You can adjust the pressure by twisting the tip of the gun.
At the dacha you can hardly do without a shower. Try to make something unusual rather than tropical, then you will be able to enjoy water treatments even more.
How to make a rain shower from scrap materials for your summer house?
If you have just recently purchased a plot and do not yet have wash room, then you can take a shower right on the street, fencing off a small area near the fence with a curtain. To make one like this tropical shower, you will need very few components, these are:
- bracket;
- wire;
- flexible hose;
- metal beer can;
- hose adapter;
- awl;
- nails.
Tie the top of the hose with wire to the bracket, and attach the other end to the water supply or pump. When you lower the pump into a barrel of heated water, you will be able to enjoy pleasant water treatments.
You can also make a rain shower head using a disc container as it. In its center you need to fix a plastic adapter that is attached to the shower hose, and the central axis of the discs needs to be removed. Using an awl, make holes at the top of the lid. Seal all fasteners well with sealant. This nozzle is held on a bracket using a thick wire or on a rigid pipe.
If you want to make a rain shower, then you can use plastic pipes for this.
You need to supply water to them, first make many small holes with a soldering iron, and then enjoy the flowing drops. Children really like these water treatments.
But do not forget to first check the water in the container from which it will be poured into the shower; it must warm up in the sun.
And to make a stationary shower, you need to first pour water into a tank or barrel, which will be located under the roof or on the roof of the building. On a warm summer day, the water here warms up well, and you can wash yourself to your heart's content. To be able to do this in cooler weather, then you need to provide a heating system in such containers.
DIY country shower
Before installing it, you need to make a shower stall. If possible, you can make it out of wood, installing this small structure on the base. Put wooden door or limit yourself to a shower curtain like this.
There are more simple options. If you have oilskin fabric, then use it.
Another option is to purchase impregnated fabric or use an old awning or tent.
If you made a fence from corrugated sheets and you have some materials left, then try making a shower for your dacha out of them. Metal pipes you need to dig in according to the markings and fill them with concrete. When it dries, cut sheets of corrugated sheets are welded to the racks. One of them will become the roof.
If you don't have enough wooden planks, then implement the option shown in the next photo on the right. And on the left is a shower that is made like a fence. So the materials for it will cost almost free.
When the shower is ready, you can install a water container on it. To make it warm up better, you can make a kind of coil out of metal or a hose. Then the water will warm up more actively.
These and other homemade products for the garden allow you to make the most of your existing containers.
To be able to receive warm water even when it is not heated by the sun, use electric heating. To do this you can plastic barrel place vertically or horizontally. Then it will be necessary to install a shadow on one side, and on the other? water fill fitting. Make an overflow hole to excess liquid flowed out, and you saw that the container was already full.
Now all that remains is to install the tank. This is usually done using a shower roof. You can put it here flat tank made of iron or plastic. You can also make a canister for the soul from a metal or iron barrel. If you need to heat water, then a heating element is installed in the barrel.
Check out other examples of what you can do with personal plot with your own hands.
Interesting DIY crafts for your garden
Gardening tools are very necessary for working on the ground. Often, the store sells not very high-quality sets. After a short period of use, the handle of the shovel breaks off, or the teeth of the hoe become bent. Therefore, if possible, try to make your own tools.
Take:
- stalk;
- fragment of a water pipe;
- scrap from a two-handed saw;
- screws;
- screws;
- fragment profile pipe cross section 3 cm.
To make the blade, take a scrap of a two-handed saw and draw the outline of the future hoe. Punch two holes.
At the same distance and the same diameter, you need to make 2 holes on the chopper itself, and then cut out a fragment from a two-handed saw.
Drill these holes using a drill and a bit designed for metal work. Connect these two parts using rivets, which are screws.
Now drill a hole in the top of the hoe so you can attach the handle here.
Make also a scoop, which is very interesting to work in the beds. Then such homemade products for the garden will allow you to acquire a very durable set of tools.
Saw off the required piece of the cutting with a grinder and begin to straighten part of it with a chisel.
Then, using lever tools to help yourself, straighten this part almost completely.
All that remains is to work with the hammer so that the blade of the scoop takes on the desired shape. Using a felt-tip pen, draw the outline of its working part and cut it out with a grinder.
With help abrasive wheel clean the edges of the shovel and make them smoother. Now sand the tool with a flap wheel. This is how shiny this shovel will be.
Also drill a hole in it for the handle, then insert it and secure it with a screw.
Cover the handles of both instruments with an antiseptic and then with varnish. Now you can use the tools for their intended purpose. If you want, use the same principle to make a ripper for beds.
It’s very exciting to create things like this for your garden with your own hands. Maybe after you've made the tools, you'll want to make a device that you can use to dry the part harvested. See how one gardener did it.
How to make a dryer for fruits and vegetables?
Look at what materials you need to take for this:
- sheet metal;
- square pipes;
- locking mechanism;
- polycarbonate sheet;
- self-tapping screws;
- 2 door hinges.
- grinder;
- welding machine;
- drill;
- stationery knife;
- tape measure and marker;
- metal scissors;
- with a hacksaw.
The door here will be metal. To make it, cut 4 fragments from an iron pipe and weld them into a rectangle. Then you need to sheathe this base with metal using screws with nuts and self-tapping screws. If possible, weld steel sheet. To make a tray holder, attach with reverse side wooden frame frame. Take self-tapping screws for this. IN in this case, on each side there are 4 wooden blocks for 4 baking trays.
An absorber is installed in the dryer. Take some sheet metal and paint it black. Use heat-resistant paint. When it is dry, place this blank on the bottom of the dryer.
For the absorber, take a thick aluminum or copper sheet, or, in extreme cases, steel. These materials conduct heat well.
Now you need to sheathe the outside of the dryer, make the roof transparent, made of polycarbonate. Then they will be able to penetrate here well Sun rays. Glass can also be used. Close ventilation windows mosquito net so that insects do not fly here.
Attach hinges and a locking mechanism to the door. Secure the door in place. Look what a wonderful, beautiful and spacious dryer it turned out to be.
All that remains is to make the baking sheets. They must allow air to pass through. First, knock together the frames from the bars, and then attach the metal mesh to them.
Now you can cut fruit and watch how your device will work. Place a thermometer in the dryer to monitor the temperature. It should be between 50–55°C. At lower temperatures, cover the bottom holes by placing a rag here.
In such homemade dryer You can dry not only fruits, but also vegetables, herbs, fish, meat, and roots.
If this design diagram for such a device seemed complicated to you, then you can make a dryer from metal barrel. A hole for the door is cut out in it, and metal mesh racks are inserted inside.
To prevent water from flowing in here and for better ventilation, a roof like this is installed on top.
You can upgrade this fixture by installing a fan and an electric heater inside.
If you want to make your own lawn mower, then this is also possible.
Turn the old one into it washing machine, for example, like this one.
And if you still have old bedside table, then you will make it a platform for a future almost self-propelled device. But you only need the door from the bedside table.
Drill holes in the center of the motor shaft. cutting knife make it from an old two-handed saw. It needs to be cut to size the desired shape, cut a recess inside.
Attach two wooden pickets that will become the handles of the mower. Don't forget to secure the motor and extension cord to it. Now you can test such an interesting unit.
If you are interested in other homemade products for the garden, then you will find it useful to watch the following video.
Many interesting ideas await you in the first video.
And with cool homemade products from plastic pipes you can get acquainted if you watch the second story.
