Jewelry made from flowers and epoxy resin. Master classes on creating jewelry from jewelry epoxy resin. Master class on making jewelry from jewelry resin

From transparent epoxy resin You can make various products: decorations, flooring, decorative elements, countertops or tables. This material is used to make earrings, rings, pendants, original surfaces with a 3D effect, beautiful figurines or other decorations.

Preparation of resin for products

Epoxy resin floors have many layers, one of which contains a design, usually a color print. The final coating is a transparent epoxy resin through which the design is clearly visible.
To make products, you must use epoxy resin and a hardener. During the process, you need to take into account that if you prepare a large amount of material, it will generate heat.
There are types of resin that harden immediately after the hardener is added. When performing work, you must comply the right technology, otherwise the resin may boil and smoke, which will make it impossible to manufacture the product. After hardening, a transparent solid material is obtained.
To make bulk products, a plasticizer is added to the resin, but first the material must be heated. In this case, the viscosity of the resin decreases; to heat the resin, a water bath is used. This heating method helps increase the setting time of the material. The resin should not be allowed to boil, otherwise it will become cloudy and you will not be able to make a transparent product.
The main condition is that there are no drops of moisture on the resin or hardener, otherwise the material will deteriorate and become cloudy. A plasticizer is added to the resin and heating is performed gradually. After the plasticizer is thoroughly mixed with the resin, a hardener is added, and the mixture is pre-cooled to 30 degrees. The hardener is introduced very slowly and the composition is thoroughly stirred; an excessive amount of material will render the resin unusable.

Making a countertop from epoxy resin

You can decorate the tabletop using coins and epoxy resin. To do this, you need to prepare pliers, pliers, glue, autogen, water-based varnish, coins, and epoxy resin with a hardener.
When working with wooden surface, it must be thoroughly washed, dried, primed, and painted in the chosen color. To restore an old tabletop, the previous coating is removed and the surface is painted.
The most difficult action is bending the coins and cutting them; this can be done using pliers and pliers. If it is not possible to cope with such work, then it is better not to finish the end sections, and place only whole coins.
First, wash the coins so that they shine, then the surface of the tabletop will be bright and original; for this, the coins must be boiled in Cola. You can use another method by putting a container of water on the fire, adding coins to it, adding vinegar and soda. It is necessary to take into account that foam will rise, so there should not be too much water. Instead of folk remedy can be used special compounds for cleaning metal products.

When all the coins are cleaned, they are thoroughly washed with plain water and dried on a cloth. The process of making a tabletop involves laying coins on the surface and filling the elements with epoxy resin. All work is done sequentially so as not to make mistakes.

Polyethylene is placed under the surface being manufactured so as not to smear the floor or other interior items. Then the resin is poured, but after adding the hardener, the mixture is left for a while so that it thickens a little and does not spill over the edges.
The resin will flow down a little, so it must be periodically picked up with a spatula and applied to those places where there is the least amount of material. You don’t have to do this, and after it has completely hardened, just throw away the polyethylene.
First from wooden material The surface is edged, then the coins are laid out beautifully and filled with resin.
If bubbles appear on the surface from air, they can be removed using an autogen. And then the product is left to dry completely, this will take about two days. Dust and other debris should not settle on the surface.
When the tabletop is dry, it is coated with water-based varnish, dried again, and only then the product is considered completely finished.

Instead of coins, you can use any original decoration, for example, dried flowers or color printing with beautiful design. The tabletop can be made original, it all depends on ideas and imagination.

Making a bracelet

To make an unusual bracelet from epoxy resin, you need to stock up on the following materials: resin with a hardener, a toothpick, a plastic glass, dried flowers, scissors, an ice cream stick or skewer, a disposable syringe, and a mold for a silicone bracelet.

Part of the thickener and two resins are poured into a plastic glass. To ensure that the amount of hardener and resin is accurate, use a disposable syringe. The components must be stirred slowly and thoroughly to avoid the formation of air bubbles. If they appear, then the composition should be left for a few minutes so that the air is completely released, but the mixture should not thicken too much.
Then the prepared bracelet mold is filled with a viscous composition, dried flowers are placed in the resin, using a toothpick, you can use it to pierce the air bubbles. Then the bracelet is left to harden for about a day, after which it is removed from the mold and used for its intended purpose. Instead of dried flowers, you can take beautiful buttons, rhinestones or beads.

How to make a brooch yourself?

The brooch can be made in the shape of a butterfly; for this you need to take following materials: Dry butterfly, which is purchased in the store, two toothpicks, resin with hardener, gloves, scissors, aqua varnish, a special clasp for a brooch.
The butterfly must be divided into several parts; to do this, the wings are cut off from the body and coated with aqua varnish on both sides. Then all the parts are placed on work surface, which is pre-covered with polyethylene. First, coat the back side of the wings, lay them on the surface, and then process the front part. While the varnish is drying, it is necessary to make an epoxy composition by gradually adding a hardener to the resin.
The composition must be determined in dark place for thickening so that it does not flow from the edges of the product during operation. Then all parts are coated with a small layer of resin, and it is carefully smeared on the surface using a toothpick.
Then leave all the parts to dry completely, cover them with epoxy on the back side, and wait for it to harden again. After this, using a plastic solution, all individual parts are glued to the body, creating the required angle. The metal clasp is attached to the resin on the back of the brooch and is left to dry completely. After this, the product is ready for use.

Making a pendant, option No. 1

You can make a pendant from epoxy resin yourself; for this you need to take: a metal mold, a tangerine, scissors, stained glass paint, a mount for the pendant, a silicone compound, sandpaper, a plastic glass, a spoon, and the epoxy itself.
The tangerine must be peeled and the neatest slice selected; using scissors, the skin is removed from one side. On the other hand, you can attach a pin to the workpiece to make a brooch, or attach an eyelet for a chain on top to make a pendant.
The slice is placed in a metal mold, filled with prepared silicone compound, and left to harden. After this, the slices must be removed and discarded, and the mold must be rinsed thoroughly. cold water. The edges can be carefully aligned using scissors.
After a day, the silicone material can be used as a mold for pouring epoxy resin. After the workpiece has completely dried, it must be properly processed sandpaper. Then the necessary clasp or eyelet for the pendant is attached, the product is painted with stained glass type paint in two layers, and varnished.

Making a round pendant, option No. 2

You can make a round pendant; for this you need to prepare: dried flowers, thickener, sandpaper, polishing paste, scissors, special molds that serve as a mold for pouring. Then you use resin, a plastic glass, tweezers, a felt tip, and an eyelet for hanging.

If there are no molds, you can use a plastic ball, which is cut into two parts, greased with Vaseline from the inside, and after filling with resin, the cut is sealed with plasticine.
You can make gems yourself, from thin twigs, dried flowers from bouquets or small leaves. In this case, the workpieces must be properly dried so that the elements inside the product do not rot in the future. To prevent dried flowers from changing color, use a resin that is resistant to ultraviolet rays.

You can make a small composition from thin twigs and flowers, build a neat bouquet, all elements can be connected using epoxy. After hardening, it is placed in round shapes, and fill with the prepared solution. After preparation, the mixture is left for a few minutes to allow air to escape so that bubbles do not form on the product. After this, the product is left to harden.
When the ball hardens, it may not have a very even shape; all defects can be removed using coarse sandpaper. And then sanding is done with fine grain sandpaper. Usually this work is done in water, this makes it possible to do everything quickly and without dust.

The next step is polishing the product, for this you can use special remedy for plastic, that is, polish. The product is applied to a felt nozzle, after which they begin to process the finished ball.
Then an eye is glued to the ball, into which the chain will be threaded; usually such a blank has an extension at the end; epoxy resin is applied to it. After this, the ear is tightly applied to the ball with the expanding end.
A lot of products are made from wood and epoxy resin, and it is also necessary to follow a certain technology. If you follow consistency in your work, you can avoid mistakes and make your own original jewelry for yourself and your home. You can make many objects from epoxy resin, it all depends on your imagination.

Epoxy resin is in great demand among jewelers. This material is excellent for making brooches and bracelets, pendants and pendants. Transparent plastic mass is ideal for self made, and everyone can learn how to make jewelry. Jewelry resin in its finished, frozen form imitates glass, crystals, gems, looks elegant and original.

Description of jewelry resin

Epoxy resin - modern polymer material, actively used for construction, installation work, as well as castings of haberdashery, jewelry, and household products. Epoxy is very popular in handicrafts; it allows you to create real masterpieces with your own hands.

In appearance, jewelry epoxy resin is a transparent liquid with a rather thick consistency. This is a two-component product; it consists of the resin itself and the hardener. The latter is the most important component that triggers the polymerization (hardening) reaction. Without a hardener, the resin remains fluid, only this substance gives it certain properties. Here are the main ones:

resistance to ultraviolet radiation, moisture, household chemicals;
strength, lack of response to shock, vibration;
heat resistance.

Before polymerization begins, various dry fillers can be added to the mass - for example, dyes, modifiers, plasticizers, wood chips or cork. They change the properties of the glaze in the desired direction. The hardener is added strictly in a certain proportion with the resin. Typically the ratio is 10:1 or 8:1, but may vary depending on the specific brand.

You can purchase transparent jewelry resin at any building materials, repair, arts and crafts store. It is quite inexpensive in cost, easy to use, and the end result is always pleasing. Domestic brands are cheaper, but have excellent quality. Foreign jewelry resins are most often equipped with additional accessories - gloves, cups, mixing sticks. Sometimes the kit comes with molds - forms for pouring epoxy. It's better to buy quality material, otherwise it may turn yellow and cloudy over time.

Precautionary measures

When working with resin, safety precautions must be strictly observed. You need to immediately buy personal protective equipment:

respirator;
gloves;
apron;
protective glasses.

Do not work in an unventilated area. If there is not enough ventilation, you will have to breathe fumes, which is harmful to the body. Vapors may cause an allergic reaction and irritate the respiratory tract. The strong chemical smell is unpleasant, although some expensive brands of epoxy do not smell as bad. After curing, the epoxy resin is completely safe; various rings and brooches can be given even to children.

If resin or hardener comes into contact with your skin, wash the area immediately with soap and then thoroughly warm water. Epoxy should not be used on products that come into contact with food. When polishing, you should also wear a respirator - this way the smallest particles of the substance will not enter the respiratory system.

Working with jewelry resin

Costume jewelry is the most popular area for using epoxy among needlewomen. In order to make jewelry, you need to purchase the appropriate molds. This is the name for pouring molds that are made from silicone or other materials. They are easy to use and the finished product can be easily removed from them.

When working with resin, you must strictly observe temperature regime. The polymerization reaction proceeds with the release of heat, and the epoxy heats up to +60 degrees. When overheated, it deteriorates irrevocably.

Preparation of the workplace

To work with jewelry resin, you will need a flat place - a small table, a tray. The base coating should be glossy and not stick to the resin. Application plastic bags uncomfortable, drops of resin stick tightly to them. It is best to cover the tray with paper tape with a shiny surface. Can also be placed on the table ceramic tiles, sheet of cardboard.

It is important to prepare everything before work necessary equipment, fittings, decor. The basic materials you will need are resin and hardener (usually included). Also useful:

two syringes (no needles needed);
dishes for mixing resin (you can take a disposable cup);
wooden stick for stirring the mass;
mini drill;
mini-drill attachments for grinding, polishing, drill attachment, turning head;
individual protection means;
sieve;
vegetable oil or Vaseline;
tweezers.

Accessories are selected depending on the type of jewelry being made. These can be bases, connecting rings, earrings, connectors, frames. You cannot skimp on fittings, otherwise the fasteners and fastenings will quickly deteriorate. The decor for the products is chosen independently. These could be the following items:

cones;
leaves;
flowers;
shells;
dried flower;
rhinestones;
beads;
glitters;
sequins.

Natural material - plants, flowers - is pre-dried between the pages of the book. It must be prepared in advance, because the drying process can take up to a month. The buds are threaded through the stems using a sewing needle. The resulting “garland” is hung in dark closet, it dries in 3-4 weeks.

Resin preparation

Before working, it is important to read the instructions for the jewelry resin. It will indicate what temperature in the room should be maintained, what are the proportions of resin and hardener. Typically, the manufacturer advises working at +25...+30 degrees and low humidity - up to 55%.

Since small portions of resin are used to make jewelry, there will be no strong heating during polymerization. Therefore, it is recommended to warm up the resins of many brands a little - this is done by placing the tube in hot water(60 degrees). After 5-10 minutes, remove the resin from the water and begin mixing with the hardener.

Operating procedure:

take epoxy and hardener with different syringes without needles;
pour into a disposable cup required quantity resins;
add the hardener in small portions in the specified ratio, immediately mixing the mixture thoroughly;
Stir the product for 3 minutes, but not too intensely - this will cause air bubbles to appear.

Bubbles are the main difficulty that beginners face. To maintain the transparency of the glaze, let the mixed resin sit for 10 minutes. The bubbles will come to the surface and can be pierced with a needle. The finished mass should have the consistency of thick honey.

If required, fillers are added to the product at this stage. Everything is done quickly, before the resin enters the polymerization stage. Wood shavings, sawdust, crumbs, and cork are usually added. It should be taken into account that they immediately fall down, so they must be distributed carefully.

The total mass of filler should not exceed 50%. The more foreign substances in jewelry epoxy, the more fragile the finished product will be. It is better to add a little plasticizer to it (a couple of drops of castor oil will do).

Fill

To begin the process of pouring resin, you should prepare a fine strainer. This method is not suitable if the mass contains fillers. The mold is first lubricated with Vaseline and parquet mastic. This is only required for molds homemade from scrap materials. Molds made of silicone and plexiglass do not need lubrication; the finished product can be removed from them without difficulty.

Next, the epoxy resin is poured into the mold; its depth should not be more than 30 mm. In the first 60-120 minutes, the composition will remain liquid, but will gradually begin to thicken. If you need to introduce decor, this is done using tweezers. It is important not to pour too thick a layer, otherwise the glaze will not be able to harden completely. If the decor is large, then pour in ½ of the mixture, lay the decoration, and then add the remaining resin. The mold must be covered to prevent dust from settling on the surface. Drying time for the product is 24 hours.

Polishing

The resulting resin products are needed. To do this, use a mini-drill with an emery attachment. The decorations are turned as required, while keeping the edges perpendicular to the drill. Next, the edges can be varnished or the resin can be diluted again and the edges can be smeared with a brush. After polishing, holes are drilled to secure rings and fasteners. The drill diameter should not be more than 0.5 mm.

Master class on making jewelry from jewelry resin

How to make various jewelry, costume jewelry? There are a number of subtleties when making rings, earrings, brooches, and pendants; they will be described below.

Making rings

A master class on creating rings should begin with the preparation of molds and accessories. You need to purchase resin, hardener and a standard set additional materials, including glitters and other decorative elements.

The work is carried out like this:

pour water into the container at a temperature of +60 degrees;
lower the sealed tube of epoxy (it is important that not a drop gets inside), leave for 10 minutes;
take resin and hardener, mix with epoxy in the required proportion;
Usually 3 ml of the finished mixture is enough for a ring;
to remove bubbles, the glass with the well-mixed mass is once again placed in a container with hot water;
knead the mixture again directly in the container with water until all the stains and bubbles disappear;
the remaining bubbles are blown out using a cocktail straw;
pour the resin into the mold, do this in 2-3 steps, so that in each layer you put the required amount of decor - powders, glitters, sequins, dried flowers, pine needles;
layer-by-layer pouring is done 2-3 hours after the previous one, so each time a new portion of resin is added;
leave the ring to harden near the battery for a day;
remove the product from the mold by hitting it from the back;
sharp edges are sanded, you can do this with a nail file.

The ring made of wood and epoxy resin looks original. To do this, you can take sushi chopsticks or any scraps. wooden furniture, trim them. The pieces of wood are placed on the bottom of the mold and filled with prepared resin. You can pre-paint the material with special pigments; they are introduced before using the hardener.

DIY resin pendants

Artificial amber can be made from resin; the results are very beautiful pendants. You can also make other crafts with the addition of paint of any shade, sparkles or other decorative elements. For pendants, wire must be prepared. The usual one darkens over time, so a material with a special coating is used. A soft, but not thin aluminum wire with a diameter of 1.5 mm is suitable. To secure a chain or lace, you need to roll up the wire ring and cut off its tail close to the junction.

The ring itself is glued onto wide double-sided tape, the other side of which is glued to a flat surface (tile, cardboard). After laying out the decor in the mold, fill it with ready-made epoxy resin with a hardener; first let the epoxy sit for 20 minutes. One layer is poured into the “lenses” to create a bottom and secure the pattern. Leave the product for 8 hours, then make another layer, then a third. A coiled wire ring is carefully immersed in the latter. Final drying takes 24 hours. You can also drill a hole in the finished pendant and simply insert a wire ring there, the effect will be the same.

Making earrings

The technology for making earrings can be even simpler; you don’t even need special molds. It is only important to buy high-quality resin and good hooks and fasteners, as well as get dried flowers, twigs, and any decor.

The work is as follows:

prepare the epoxy resin, knead it, leave for 2 hours to acquire viscosity;
draw stencils of oval, round or other shapes on paper;
cover work area with oilcloth or rinse and wipe dry, lay out the stencils, cover them on top with stationery multicolors;
start pouring the thickened resin directly onto the multifora, carefully distributing it over the stencil using a toothpick;
the height of the workpiece should be no more than 1 cm;
Cover the workpieces with dust domes on top and leave for a day;
after hardening, attach to earrings the required form using a nail file;
knead another portion of resin, let stand for 2 hours;
put decor on the blanks, drop a little resin, let them dry a little;
then apply several more layers with a brush, each one should dry for 2 hours;
At the end of the work, let the earrings dry for a day, then sand them and drill holes for the hooks.

Resin brooches

To create brooches, you may additionally need acrylic dyes. After combining the resin and hardener, let the mixture sit for 2-3 hours, then pour it into special molds for brooches. Previously, the edges of the molds can be coated with a mixture of PVA and dyes, then the products will acquire original look. The composition of dried flowers looks beautiful inside the brooches. To prevent them from floating to the surface, apply the first layer of fill, let it dry for 2 hours, and then glue the decor with PVA. The products are completely dried for at least 24 hours.

Cabochons at home

Cabochons mean a method of processing stones in which they acquire a smooth convex surface without edges. Cabochons are flat on one side and look like a lens on the other. The easiest way is to pour them into special molds, diluting the epoxy according to the instructions. They coat the walls of the mold with a thin layer, and after hardening, remove the workpiece. Now you can put any decor into it, then it is filled to the ground. After drying, the medallion is polished to perfect smoothness.

If you don’t have time to wait for the jewelry to dry for a long time, the process can be speeded up. To do this, heat the product in the oven at temperatures up to +50…+60 degrees. Many craftsmen, if a drill is not available, insert a cord into the product while the decoration is still soft. This will help avoid drilling.

When pouring, be sure to ensure that the form is absolutely smooth. In this case, you won’t have to spend a long time polishing the jewelry. Do not wipe the finished product with alcohol, it will ruin it. glossy surface. Careful handling will allow you to wear rings, earrings or pendants for a long time no complaints.

Jewelry and paraphernalia not made in a factory are becoming increasingly popular. Such products are called .

Epoxy resin is an excellent material for, it can be wonderfully used for making various items at home. We will talk about this in this article.

In contact with

What you need to know about resin

What is epoxy resin? This is a substance consisting of several components: the resin itself and the hardener, with the help of which it acquires a solid state. When both components are mixed, hardening and subsequent polymerization occurs . Epoxy resin cannot be used use without a hardener, this is as important a component as the first.

The two substances mix differently depending on the brand. To find out how to mix the components correctly, you need to read the instructions that are in the package. The resin becomes very hard. It is also unique in that it retains its transparency in any condition. It is harder than plastic, but looks very similar to organic glass, sometimes even on real glass, but one that won’t break if dropped.

Epoxy resin for pouring is often used in crafts because it is very hard, resists wear well, and crafters love it because it is initially liquid, which means it can be poured into any shape.

So, when you understand the properties of the substance, you can move on to creating jewelry from epoxy resin. Epoxy resin is great for!

Required Ingredients

To create any decoration made of epoxy resin, you will need:

Silicone molds;
various natural materials, such as pebbles, shells, flowers and the like;
the epoxy itself;
a container in which the substance will be mixed, as well as sticks or an unnecessary spoon.

To understand how resin jewelry is made, you can take a closer look at the creation of this multifunctional liquid. First you need to wash and dry the silicone mold.

By the way, you can create a silicone mold yourself or buy a ready-made one. But it is worth noting that when self-production A silicone mold will require a lot of effort and patience, so to avoid wasting time, you can purchase a ready-made mold. Next you need to start mixing the resin with the hardener.

As mentioned earlier, mixing instructions can be found in any product packaging. It is necessary to stir both components very well so that they become homogeneous; after stirring, it is better to put the composition aside for a minute. This time will be taken for unnecessary air bubbles to come out of the resin.

Next, you need to prepare the necessary accessories in the form of dried leaves or pebbles, which will be placed inside the resin and serve as decorative elements. When a few minutes have passed and the epoxy has gotten rid of unnecessary bubbles, you need to very carefully pour it into a silicone mold.

This process must be done very slowly and carefully, because if there is overflow, you will have to sand the product later. After pouring, you need to take the prepared decorative elements, and very carefully place them inside the resin that is already in the silicone mold. It is very important to ensure that all these elements do not stick out from the epoxy, but are completely immersed in it.

After the operation is completed, you can put the silicone mold in the oven for 10-15 minutes. The temperature should be 80 degrees. The silicone mold should be placed in the oven precisely at the moment when it is already fully preheated to desired temperature. As soon as 80 degrees is reached, you need to turn off the oven. It is at this moment that you need to place the silicone mold in the oven. This way the product will dry and harden faster, and at the same time the last bubbles will come out of the resin.

Now you can let the products dry for 24 hours. After this it will be completely ready. And now the bracelet can be removed from the silicone mold. If the product turns out sloppy in some places, you can go over it with fine sandpaper. Now the bracelet can be varnished. Actually, that’s it, the transparent bracelet is ready. Using the same principle, you can make various souvenirs from epoxy resin.

It was brief instructions, which will give an idea of how exactly to make various products from epoxy resins. But epoxy makes it possible make not only small items like a bracelet. Once the manufacturing technique is mastered, you can move on to more complex products.

Beautiful epoxy resin table

As mentioned above, the epoxy composition truly includes unique properties that will help realize the craziest design ideas. Using this resin you can even make a beautiful decorative table. And depending on the craftsmanship, it can either be a very simple table or a real work of art with a striking shape.

Epoxy resin table top very hard, it will not be afraid of external damage, deform, and you should not be afraid of cracks during use.

Some precautions should be taken during manufacturing:

it is necessary to work only in a special painting suit;
We must not forget about the use of gloves and headgear.

With these precautions you can avoid some negative consequences, in the form of resin getting on the skin and hair.

For making epoxy resin countertops it is necessary to have a blank form that will be positioned exactly horizontally, otherwise the table will turn out uneven surface. There will also be ugly sagging. The form in which the filling will be made should be dried very well; moisture should not be allowed to enter.

A template made from a glass base is ideal as a form. Of course, the glass must be washed well before pouring. And also the form should be detachable, this will allow you to easily remove the finished table from it.

When the mold is ready, you can pour it into it. required amount epoxy resin. While she will be in for some time liquid state, you can add various decorative elements to it. It could be wood, stones, or whatever comes to the mind of an enterprising craftsman.

Single-color or multi-colored table

Epoxy itself is colorless. Therefore, the tabletop made from it will be transparent. This is precisely why needlewomen love her. Therefore, all decorative elements that will be added inside will be clearly visible if the table is transparent. However, various pigments are made specifically for coloring epoxy resin, which will allow you to obtain almost any shade.

You can also achieve such an effect that the table is combined colors. In this case, it is necessary to use resin with dyes of different shades.

After the mold is filled, you need to wait 10-15 minutes, and then you need to remove unwanted bubbles, of course, if they appear on the surface. It is better to leave large products, like a table, to harden for two days, after which you can begin grinding and polishing. After a week, the table will be completely ready and can be used for its intended purpose.

Paintings

But this does not limit the use of epoxy resin for decorative purposes. Besides decorations and tables, resin can be used to make beautiful paintings.

Materials

To make a painting from epoxy resin you will need:

When you have decided on all the necessary components, you can start mixing the resin. This must be done in the same way as has been written many times before. And do not forget about the use of protective suits and gloves. Of course, as in any case of using resin as a craft, it is necessary to prepare molds for pouring.

To make a picture, you will need a frame, purchased or made yourself. You need to glue regular glass to the inside of it. The epoxy compound will now be poured onto the glass inside the frame. Filling is done in the same way, as in previous cases, slowly and carefully. Care should be taken to ensure that unnecessary bubbles do not appear. This will not look very nice on finished products, so it is better to avoid bubbles. You need to pour a small layer to begin with and wait until the substance hardens.

Now you can start drawing on this surface. Of course, some artistic talent will be needed. Drawing on a resin surface is very different from normal drawing on a piece of paper. After all, the surface of the resin is very smooth, which means that the paint will not cling to the surface well. There is a slight difficulty in applying strokes to the picture.

There are some advantages to painting with epoxy resin. The main thing is that if the drawing does not work out the first time, then you will have the opportunity to simply wipe off the paint with a cloth. Of course this can only be done if if the paint has not yet dried. Well, even if this happened, you can simply scrape it off the surface of the resin.

As you can see, you don’t have to be afraid of mistakes. To begin with, you can conduct some experiments, make sketches and see how the drawing will look, and only after that apply the final strokes. And if you don’t like something, you can easily delete the drawing and start all over again. To get clear and even edges of the picture, you can use electrical tape. In this case, everything will be very smooth after removing the adhesive tape.

Next comes pouring the next layer of epoxy resin onto the finished drawing. After the drawing is completed and the second layer of resin has been poured, you can lightly sand the surface with sandpaper, of course, if there are some uneven areas. If the surface is smooth, then you don't have to bother with it.

Surface protection

To protect your painting from ultraviolet radiation and yellowing from the sun, you can coat it with a special spray that will do an excellent job of protecting the surface. Such products are easy to find in construction stores at a very reasonable price. That’s all, actually, the picture is ready.

It is worth noting that the product will be quite weighty, so you should not try to hang it on a regular nail in the wall. The surface should be significantly strengthened and everything should be thought through before hanging the picture on the wall. Epoxy resin provides such wonderful possibilities. This is a real find for creative people that they will be able to create paintings or jewelry that will amaze everyone around them.

Price

As for the price of epoxy resin, it is not too expensive. If you plan to make small bracelets, then you can go to any hardware store and buy epoxy resin for about 100-150 rubles. If you plan to manufacture large objects, such as tables or paintings made of epoxy resin, it is better to go online and find sites that sell epoxy resin in large quantities. This will be much more profitable than buying small jars.

Good luck and success in your creativity!

Both epoxy and jewelry wire, in the sense of jewelry, special. Regular wire is uncoated and darkens over time. This can, of course, be used as an advantage, but it is not a fact that oxides will not damage the product in the process. More or less suitable aluminum wire can be found in flower shops. But again, most likely without coverage.

We take a wire that is soft enough, but not too thin. I have aluminum 1.5 mm coated. We turn the ring. It is advisable to use some known even shape.

Use side cutters to cut off the long end of the wire. Keep in mind that in this case one tip (here it will be on the right) will be sharp, and the second will be perpendicular to the wire, which is what we need.

In the same way, we cut the tail very, very close (or better even with a tiny margin) to the first cut.

Connect the ends of the ring. The closer they fit to each other, the better.

Now we glue our ring onto wide tape, which it is advisable to first fix on a flat surface (I have ceramic tiles or glass) with the sticky side up.

Since it is better to dilute epoxy in at least 10 ml, then several blanks should be made at once, unless of course you want to throw away excess diluted epoxy. It is very important to check the tightness of the ring to the surface.

Next, I fill the frames with artistic waste - inlays. In general, they advise pouring the bottom layer first, and then pouring in the garbage, but since the time from mixing until the epoxy hardens is limited, I do it in a different order.

So, the blanks are laid out, the tightness is checked, and you can breed them.

I use Ice Resin (odorless, liquid and almost no bubbles - the latter is very important). I measure out the same amount of resin and hardener...

It is very important to measure the exact amount of liquids. Epoxy is an insidious thing: a little more hardener and it will start to “goat” (that is, reach for the tool with such horns) too quickly; any less and you'll be waiting forever for the lenses to harden. :) Once again: special epoxy, jewelry Ice Resin or Crystal Resin. It differs from the industrial one in the absence of odor, greater transparency and less bubbles. I ordered it here: http://vkontakte.ru/club13872192 - here it is:

Once upon a time I tried to make fillings with epoxy glue - the quality is much worse, it is more difficult to work with and in general it is not intended for jewelry purposes.

I knead. At first, the resin becomes cloudy and opalescent stains appear in it - this is normal. Continue stirring for another minute and a half... Until the mixture becomes transparent. Large bubbles will come out on their own, small ones gradually too. However, in the product they will need to be helped to “hatch”. From the start of mixing until the epoxy begins to “rise”, it takes us about 30-40 minutes.

Fill in the lenses. I use a rubber stick for oil (it will be further in the frame), and I also use it to push out bubbles.

The initial filling, as can be seen in the photo, does not completely cover the “garbage”. This is fine. At this stage we only need to create the “bottom” and secure the drawing. You can even pour less - I overdid it in the frames in the lower right corner. :) We have half an hour to do everything: fill it, push out the bubbles with a needle or a glass, make sure that the lenses are filled more or less evenly.
Now we exhale for 8-10 hours and hide our signs with fills on a distant, dust-free shelf and cover it with a lid, leaving a small gap for air between it and the shelf.

Stage two. After 8-10 hours, the lenses are ready for secondary filling. Mix the epoxy again and carefully apply the second layer. It should cover all protruding parts.

Epoxy does not contain solvents, so it does not shrink when cured. In addition, it is viscous, so if you pour it “heaped”, it will flow to the edge and stop there. But here it is important not to overdo it.

After another 8-10 hours, we remove our lenses from the tape. On
At this stage they look scary. Now we take the solvent and wash off the remaining adhesive tape. Alcohol, gasoline, white-spirit, acetone or nail polish remover will do.

Pour the third layer from the inside out and dry for another 8-10 hours. Voila. :) You can drill, insert into a frame, braid with wire and anything else your heart desires.

And more epoxy work

My favorite is heather. :)

Bracelet with heather

The poppies are plastic, but the lemon balm petals and blades of grass are natural (that’s where the herbarium came in handy).

Bracelet " Fresh water". Freshwater pearls, mother-of-pearl and other garbage. :)

Jasper chips, aventurine glass, fluorite sand and mother-of-pearl chips in jewelry epoxy and gilded wire. Tie pendant

Lapis lazuli chips, mother of pearl, dried heather, fluorite sand in epoxy and gilded wire. Bracelet.

Bracelet and medallion.

Jewelry created using epoxy resin and mold is amazingly original appearance. This master class will present step-by-step instruction, supplemented with photographs and detailed description each stage. By repeating all the steps of the master, you can independently create a unique decoration that will attract the attention of others.

So, for work we will need:

epoxy resin;
silicone molds that are combined with epoxy resin;
disposable gloves, plastic cups, syringes, sticks for mixing ingredients;
decorative elements: shells, colored pebbles, dried flowers;
powder, stained glass paints and gold leaf;

In order not to stain the table surface, it is better to do the work on a regular file. A hemispherical pendant will look beautiful if you add dandelions to it. For work, we will need two dandelions, so that later we can compare how they look in the finished version.

Before work, carefully rinse all molds prepared in advance and wipe them dry with a cloth. Wear disposable gloves to protect your skin from unwanted damage. After this, pour resin and hardener into plastic cups. In the future, it will be convenient to draw them into a syringe. Carry out all jewelry making steps in a well-ventilated room.

Measure out the required amount of epoxy resin and pour it into a clean a plastic cup. Using a syringe, draw up the hardener and add it to the resin cup. Different manufacturers indicate different proportions required to obtain the result. Therefore, please read the instructions on the package first. It is important to carefully follow all manufacturers' recommendations for work. The quality and beauty of the finished craft directly depends on the accuracy of the calculations. If you mixed epoxy resin and hardener, but the mixture does not harden, then the proportions are off. This can also happen due to insufficient thorough mixing of the ingredients.

If the syringe has a rubber insert, the hardener will not splash. The resulting mixture is mixed with previously prepared wooden sticks. You can use kebabs skewers. The solution should be stirred for ten minutes in a circular motion.

The dandelion fits very neatly into the mold. Parachutes that interfere with work can be removed using tweezers.

After mixing the ingredients, leave the resin for half an hour. This time is enough for all chemical processes to take place. See what's happening chemical reaction, depending on the condition of the glass. It will heat up. It is not recommended to work with epoxy resin in hot weather, as the reaction proceeds quite violently and the resin completely hardens within half an hour. Although, different manufacturers offer epoxy resins of different quality.

Carefully, in a thin stream, pour epoxy resin over the dandelion placed in the mold.

After hardening, the resin will settle a little. Therefore, it should be poured into the mold with a small margin (convexity).

Now let's try to make beautiful rings from glass washed by the sea.

So, take some resin, lay out the pebbles and fill them with the mixture in the same way as when working with a hemisphere. A small bulge should form.

You can make earrings with dandelion parachutes. Pour a small amount of resin and carefully spread it with a stick. This step will thicken the resin slightly. This will help the parachutes stay in the position in which they were stowed.

Make a bouquet.

Pour some resin on top to create a bulge. If you work very carefully, then minimal sanding of the product will be required in the future.

A truncated ball is created in a similar way. Fill half of the mold with resin.

Using a toothpick or needle, place the required number of parachutes.

Pour epoxy resin into the mold.

Now let's try to make a beautiful bracelet decorated with shells. Pour resin into a special bracelet mold. At this point the epoxy became even thicker. This is what we need. Add pebbles and shells to the mold. The crushed shells will stick to the walls, giving the impression of being suspended.

About half an hour ago a new batch of resin was prepared. It should be poured into the mold from above. This must be done with extreme care to avoid the formation of bubbles. What to do if bubbles appear? Preheat the oven to 80 degrees and place the mold with resin there. Leave in the oven until the temperature increases to 204 degrees. After this, the bubbles will come out.

Make sure that the mold is in a level position during operation. Otherwise, the resin will harden at an angle. Remember that the more carefully you work with epoxy resin, the less sanding you will have to do on the finished product.

Now leave the mold for a day until it dries completely. To prevent debris from getting onto the surface of the future product, cover the mold with a box or lid.

While the bracelet is drying, you can make a pendant. Let's start by creating the main background. To do this, apply to the workpiece liquid plastic. Cover it up polymer clay, rolled into thin layer. The resulting composition is baked in the oven. After cooling, you can start working.

Pour a couple of drops of resin onto the surface. Using tweezers, a composition is made from dried leaves or flowers. In this case, the resin is the glue. She will not allow the composition to budge. Fresh flowers should not be used to create the composition. Over time, they will turn black and lose their appearance.

There is a holder on the back surface of the pendant. It should also be placed in a mold to create a flat surface. It is not necessary to think through the composition in advance. You can create masterpieces by improvising.

The result is a unique picture. The craft needs to be dried. When it dries, a second layer of resin is poured, forming a bulge.

After a day, the bracelet hardened and can be taken out of the mold. This is the top part of the product.

Rings, earrings and pendants are created in a similar way.

Beautiful hemisphere decorated with dandelion.

Unusual truncated transparent balls with parachutes.

You can also make small decorative hemispheres.

Previously made rings decorated with sea glass.

To give epoxy resin bright shade, you can add a little powder or stained glass paints. If you decide to use stained glass paints, add very little to the resin. Otherwise, the proportions between the resin and hardener may be disrupted. The finished product will not harden, but will become sticky.