Heating system – important element every apartment or house. The batteries warm the home during the cold season. Often heating radiators are knocked out of general design rooms, spoil its appearance. Then the question arises of how to close the radiators and pipes (photo) and give them a more attractive appearance.
Not only cast iron batteries Soviet-style ones can ruin the aesthetics of the room. Modern heating radiators also disrupt the elegant composition of the room. Covering the battery is necessary not only to improve the appearance of the room. It can perform a more practical function, such as protecting children from sharp edges and burns that can occur when touching heating elements. So how can you cover up unsightly radiators (pictured)?
Advice! Before you finally choose a method for decorating a radiator, you need to make sure that heat loss due to it will be minimal. Therefore, the radiator cover should be considered not only from a design point of view.
What to consider when choosing a battery cover method
Heating radiators provide room heating in two ways:
- Infrared radiation, transferring heat to objects in the room.
- Convection, heating the air. Warm air rises and displaces cold air, circulating air in the room and equalizing the temperature throughout its entire area.
Before determining how to close radiators and pipes (pictured), you need to understand that any decorated element will lead to a decrease in heating power. How larger area dense surface (without slits or holes) of the decorative element, the worse the room will heat up.
Attention! In terms of maximum heating efficiency, perfect option for a decorated surface, it should look like a mesh with large holes.
In addition, the cover must be designed in such a way that the heating radiator and pipes can be accessed at any time. This is necessary if the battery leaks or its sections need to be washed. Therefore, it is better to use a removable screen or box with a special door that provides access to the mounting location of the pipe and radiator.
The most popular ways to decorate a radiator
If the question of the appearance of the heating radiator arose the day before overhaul, then you can simply select the battery that best suits the planned design. For example, if the room is decorated in Victorian or Venetian style, then a massive cast iron radiator will look very organic.
It is impossible to implement this option if the repair has already been done or the replacement of heating elements is not expected during the repair process.
If the size and shape of the battery does not stand out from the overall style of the room, then you can simply paint it to match the color of the walls. Radiators in a bright contrasting color can be a highlight modern interior. In stores you can find special paint in various colors.
One of the most simple ways disguise the radiator - install a screen on it. The hanging screen fits over the battery and does not need to be mounted. The main disadvantage is that it only hides the radiator itself; the pipes remain visible. Such screens are most often made of metal and are inexpensive.
The method of masking the battery and pipes largely depends on the style of the interior of the room. For example, for the interior in Japanese style You can hide the heating pipe in a bamboo trunk. To do this, the tree trunk is sawn to length, and then it is wrapped around the pipe and secured. In a room decorated in a country style, the pipe can be wrapped in thick, beautiful rope with a distinct texture. If the radiator is located in a niche under the window sill, then you can cover it with a small curtain sewn with my own hands. This cover will fit well into an interior in Provence or country style and will give the room a homely feel.
If the battery is built into a niche, then you can hide it flat screen with a pattern, carving or simply in the form of a lattice.
How to hide heating radiators without involving specialists? You can make a wooden box screen yourself that will cover the radiator on all sides. It can decorate the interior of a room, especially if the top of the box is turned into a stand or small table for vases, figurines, and paintings. A closed top of the box will reduce efficiency heating element. In addition, natural wood, although it looks expensive and beautiful, can dry out when temperatures change. Ready-made boxes made from MDF panels are more practical and cheaper in this regard.
The battery box can be integrated into the window sill or shelves. You will get a solid design of unusual and stylish design. If the battery is located at a distance from the wall, then decorative box can be connected to a window sill to make a bench. You can see how to hide heating radiators in this way in the photo below.
One of the cheapest ways to decorate a battery is to cover it plastic grill. This option may be suitable for the bathroom, but not for residential premises, since plastic can release harmful substances when heated.
A glass screen can fit beautifully into any interior. It is a thick glass plate that is attached to the wall using steel holders. The screen covers only the front part of the radiator, leaving the top, bottom and sides open for the free passage of warm air into the room. The surface of the glass can be made mirror-like, and photo printing is often applied to it.
Preparing to create a drywall box
Using drywall you can easily and quickly hide a heating radiator. Not everyone knows how to cover a battery with drywall with their own hands. To do this, you must have minimal skills in repair and construction work and follow the instructions.
To make a plasterboard box you will need the following:
- measuring instruments: corner, tape measure, ruler;
- marker (pencil);
- heat-resistant plasterboard (thickness 12 mm);
- liquid nails, dowels, screws (for fastening);
- level;
- metal profiles of two sizes (27x28 and 60x27);
- screwdriver, pliers, hammer drill, screwdriver;
- serpyanka (construction self-adhesive mesh).
- Before hiding the heating radiators (pictured), you need to choose which installation method the markings will be used for:
- a box when only the radiator itself and 15-20 cm of space outside it are covered;
- wall, when plasterboard covers the entire wall at which the battery is installed, or the hole between the window sill and the floor, if the battery is located under the window.
The second method requires using more materials.
Marking drawing and frame manufacturing
To begin with, markings are drawn on the wall around the perimeter of the radiator. It must be taken into account that the edges of the box must protrude beyond the battery by at least 10 cm. Otherwise, the front surface cannot be covered with a removable screen.
If the structure rests on the floor, then 3 lines are drawn on the wall - one above the radiator and two on the sides. If the box hangs, then another line is drawn under the battery.
After the drawing, install a frame of metal profiles according to the following scheme:
- The profile (27x28) is attached to the marking line, and marks are left on the wall with a screwdriver (with a distance of 15-25 cm).
- Holes for fastenings are made using a hammer drill.
- Dowels are inserted into the recesses.
- The profile is applied to the wall and secured with screws.
This is how all elements are attached metal frame. After its installation, jumpers from the 60x27 profile are installed. The fully finished sheathing must be strong. If it wobbles, then additional transverse elements are added.
The next step is cutting the drywall using a utility knife. To do this, a sheet of material is applied to the sheathing and markings are made on it. The cut cardboard covering is screwed to the frame with self-tapping screws (3-4 pieces per meter). The main thing is that the screws do not tear the sheathing material.
The final part of the work is finishing. Using a sickle mesh and putty, the seams between the parts of the drywall are sealed. The fasteners are sealed in the same way. Then the entire structure is treated with putty. After complete drying, the surface of the box is leveled with sandpaper, then it is painted to match the color of the walls or covered with wallpaper.
It is not recommended to completely cover the battery with drywall: this can result in losing a large amount of the heat it generates. You can drill many holes in the surface of the drywall, but dust will clog in them, and the entire box will not look very aesthetically pleasing. It is better to hide the front part of the radiator with a removable screen.
Today, the building materials market offers many boxes and screens designed for decorating heating radiators, among which you can choose an option that is ideal for the interior of the room. You can construct the box yourself. Finishing the battery with plasterboard is one of the simplest and cheapest options.
When wondering how to close a heating radiator with your own hands, you need to take care not only of the decorative side of the issue, but also of practicality. No matter how beautifully and stylishly designed a heating radiator is, if it does not perform its main function (warming the air in the room), there is simply no point in it.
Excellent interior design can be seriously compromised by the appearance of radiators. After all, most of them are not at all aesthetically pleasing. Therefore, apartment owners often have a question: how to cover it. There are many methods of camouflage. But before choosing one of them, you should carefully analyze how feasible such a decision is. After all, any errors in the installation of the structure can seriously reduce heat transfer.
Decor for radiators
Before you start going over best options To close, consider the alternative proposals presented by the designers:
- Using curtains. An ordinary curtain made of cotton fabric will cover the radiator perfectly. But this method can only be used if the battery is located in a niche. Blinds can be an excellent alternative to curtains.
- Painting. A radiator can become a real highlight of the interior. Of course, the painting method can only be used for modern aluminum products. Old cast iron ones, even if painted, will stand out against the general background. You can design the radiators in one color scheme that matches the overall tone of the design. The drawings look great. If you don't have artistic talent, it doesn't matter. You can always use stencils.
- Decoupage. This method will not require you to make major investments. All you need is PVA glue plus beautiful napkins. Cutting out original elements from the selected material, cover the surface of the radiator. A special one is applied on top of the decor in several layers.
If decorating radiators is not possible, then consider how to cover radiators. The photos posted in the article will allow you to get acquainted with some of the options offered by specialists.
Important Terms
When thinking about how to cover radiators, you need to consider several points:
- The air flow should circulate freely. This will ensure uniform heating of the room and protect windows from fogging.
- All adjustment parts must remain accessible for emergency repair work. To do this, you can create a removable structure or provide in places threaded connections windows.
Hinged screen
This is the simplest method. When planning how to close the radiator in a room, you can experiment with a hanging screen or use a regular grille. Such structures are most often made of metal.
This battery masking tool has a number of advantages:
- A hanging screen or grille does not interfere with heat transfer at all. Air currents can circulate freely.
- The design is easy to install. The screen just needs to be hung on the battery.
- The grilles are completely safe, because their corners are usually rounded.
But, unfortunately, the hanging screen is not without its drawbacks. The most important disadvantage Such disguise is a lack of aesthetics. In other words, the appearance of the screen is far from the concept of “beauty”. To remedy the situation, you can paint and paint the structure.
Glass screens
This is an excellent solution for those owners who are interested in how to beautifully close radiators. Fireproof thick glass will become original version for a modern interior. Such a screen is often decorated with stained glass patterns or photo printing.
Installing the structure is completely easy. It is secured using special screw holders that provide elastic gaskets to protect the glass surface. To fix the screen, it is enough to make just a couple of holes in the wall.
Glass screens can be purchased at design workshops. But the disadvantage of such camouflage is the high cost of the material.
Wooden frame
How to cover radiators? Look great wooden frames. They can become a harmonious addition to any interior. They will fit especially organically into a room furnished with wooden furniture. The ideal solution there will be a frame that matches the headset in texture, shape and color. In this case, it will be one piece with all the furniture.
Masking a battery out of wood has a significant advantage. Such a frame, depending on the design, can become an excellent rack, shelf, table, or stand for various utensils. If it is small in size, it can be equipped with an additional seat, such as a bench. In addition, using all your imagination, you can create a completely unique frame for the radiator.
However, wooden structures are not without their disadvantages. Exposure to high temperatures can have a detrimental effect on the shape of the frame. Wood can become deformed.
Built in furniture
This is a very original solution. Heating radiators can be disguised with furniture. A chest of drawers or a small closet would look great. Such furniture is often made to order. But if you have at least basic woodworking skills, you can easily complete this design yourself.
In this case, you can use any other material. It can be plasterboard, MDF, laminate, chipboard or plywood.
Many owners are happy to use plastic to make the frame. It's simple cheap material, which can fit perfectly into the interior. But when planning plastic structures, it is necessary to take into account the following disadvantage of the material. When heated, some species are capable of releasing quite toxic fumes into the air.
How to cover radiators and pipes with plasterboard
But the most popular coating remains plasterboard. Installation of such material is simple and not labor-intensive. Drywall is affordable and does not cause any special problems in purchasing. But at the same time, it opens up wide opportunities for implementing the most daring design solutions.
So, let's look at how to cover a heating radiator with plasterboard. Designers offer some great ideas:
- Continuation of the window sill or false wall. But remember that for free air circulation it is necessary to provide several small windows. When choosing drywall for such purposes, be sure to choose heat resistant material. It should be noted that most varieties can withstand fairly high temperatures. The design is completely easy to complete. Initially, it is necessary to install metal guides. The drywall itself is attached to them. Be sure to provide windows into which original grilles are inserted.
- Making a fireplace. The appearance of the room will greatly benefit from such a piece of furniture. A false fireplace will fill the room with an extraordinary homely atmosphere and give it coziness. Moreover, the design can be made in any style.
Conclusion
When you are faced with the acute question of what to do with standard heating radiators and disguise boring batteries, be sure to analyze several solutions. Consider what options designers offer. And only then choose the method you like best. Perhaps your batteries would benefit greatly from an original paint job? Or, by creating a frame made of plasterboard, you can create a wonderful shelf for your favorite trinkets.
The solution to the problem of how to close batteries, which do not always have an elegant, decorative and attractive appearance, must take into account not only the aesthetic component. What looks good in a photo can actually lead to a significant decrease in the temperature in the house. It is important to take into account that in addition to a purely decorative function, a panel (screen, box), which helps to decorate heating appliances, also performs quite an important function in families with small children. functional purpose, protecting the child from both burns and sharp corners of the battery. Therefore, we will consider the decor of the radiator in the room from the perspective of three specialists at once - a designer, a heating engineer and a plumber
The problem is how to hide it in the apartment Radiator and the pipe supplying coolant can be considered from two aspects. The first is on the eve of a major overhaul, when it is possible (and necessary) to replace the battery. In this case, you can select and install designer batteries and then the issue will disappear by itself, and the heating efficiency will not decrease (more on this below). For example, if we're talking about about the room in the classic victorian style, then you can’t do without cast iron batteries, powerful, massive, on a stand, with casting in sections - such radiators will become a stylish detail general interior.
Another thing is when the repair does not involve replacing the plumbing, in this case there are several options for how and with what to close the battery.
Painting
The easiest way to hide the battery is to simply paint it to match the wall near which the radiator is mounted. You just need to purchase special paint for painting batteries. This is an option when radiators match the overall style of the room
Hanging screens
Screen box
Allows you to completely decorate the entire heating radiator, while you can simply make such a screen for the battery yourself from wood, the diagram is shown in Fig. 1.
In this case, the box can not only hide an aesthetically unsightly radiator, but also act as an additional element of furniture, for example, a stand for vases, shelves, or can become part of rack or console. A decorative wooden box can be made so that it fully matches the style and decor of the room. Its main disadvantage is the closed top, which significantly reduces the efficiency of convection. In addition, the tree dries out when the temperature changes. In this regard, screens (boxes) made of MDF, which are both cheaper and more durable, look preferable.
Advice! If the radiator is located far enough from the wall, then by combining a window sill and a frame, you can make a bench for romantic gatherings by the window.
Plastic gratings
Cheap, but at the same time definitely not for residential premises, they will hide the battery/pipe, but when heated they can release compounds dangerous to humans, especially if the panel (grid) is made of cheap plastic by a “gray” manufacturer.
Advice! Plastic screens suitable for non-residential premises, taking into account resistance to high humidity- For bathrooms.
Glass screen
A glass panel, as a rule, is a rectangular sheet made of translucent thick glass, which is attached to the wall with steel holders. Making it possible to decorate the heating device from the front, it leaves open space below and above and does not interfere with free air convection. A popular solution is a glass panel with photo printing.
The main task of a heating radiator is to heat the room, which it does by a combination of two methods. The first is infrared radiation, in which heat is transferred directly to objects located in the room. It is this thermal energy that we feel when we bring our hands close to the battery. The second method is convection, by heating the air, which, rising upward, displaces the cold air, thus organizing air circulation in the room, which leads to a more or less uniform distribution of temperature.
Therefore, you should immediately decide on the main thing - no matter what method is chosen to hide pipes and radiators in the apartment, any decoration of the radiator will definitely lead to a loss of heater power. A simple example is installing a glass screen that almost completely blocks infrared radiation. And the larger the solid (without holes) area of the cover (screen) on the battery, the “deeper” the battery is hidden, the more significant the losses will be. Solid (blank, without holes) boxes on top of the radiator are especially unacceptable - after all, they block warm air, rising up. The photo below shows a particularly unfortunate design designed to decorate the battery.
On the one hand, it never fully fulfills its role - the supply pipe is very clearly visible. On the other hand, there are very small holes that significantly reduce the movement (convection) of warm air, and a solid screen (even a metal one) blocked thermal radiation. That is why, from the point of view of thermal engineering, the ideal choice is a panel made as a coarse mesh.
In Fig. 2 is presented in cross-section practically optimal model radiator grilles.
Infrared (also known as direct thermal) radiation, indicated by red arrows (3), passes through the grating (D) with minimal losses. It is worth paying attention to the thermal insulation screen (A), which reflects heat (part of the infrared radiation) and, instead of aimlessly heating the walls, returns it back to the room.
Cold air (indicated by blue arrow 1), entering from below, heats up and rises. To prevent heated air from stagnating under the window sill, forming a thermal cushion that blocks convection, install a visor (B) that directs the air flow outward. It is also worth installing an injector in the upper part (two metal plates), which allows heated air to be removed from the front side of the radiator. It is especially effective when high temperatures, due to the narrowing at the top, the draft increases significantly and the volume of exhaust air increases significantly. Despite installed grille, the overall energy efficiency of such a design will be significantly higher than with simply installing the battery near the wall.
Second, no less important point– accessibility of the radiator and supply pipes. It's no secret that the battery is one of the potential sources of problems in the apartment. Any radiator can leak - there are many reasons for this, from water hammer to poor quality material. In addition, given the low quality of the coolant (water), it may be necessary to remove the battery in order to wash it - otherwise, the number of actively heating sections will be constantly reduced. So, from a plumbing point of view, the best cover (panel) for the battery should provide easy access to the radiator - either not have a permanent fastening, or be attached.
Advice! At the very least, it is necessary to put a “revision” ( plastic door), which will give access to the place where the pipe is supplied to the radiator - as experience shows, this is the weakest point in the entire system.
How to close the battery - we look at the options in the video:
Transform the radiator by making it into a false fireplace, sleeping area. Battery decoupage, decorative screen will turn this heating device into a work of art.
DIY decorative radiators
There are several ways to transform this heating device, these are:
- decoupage;
- painting;
- decorative screens;
- pasting;
- camouflage behind a false wall.
With such an interesting bronze tint, it will end up looking like an object made of a noble metal. Before you begin the conversion work, you need to prepare:
- gauze;
- latex gloves;
- acetone;
- black and red paint in a can or gold paint in a spray can.
If the battery has not been painted before, it must first be treated with an alkyd primer. If there is rust on the heating device, it must be removed.
Next, the surface to be treated is degreased with acetone; you can also use blowtorch. If you want to paint the battery so that the paint goes on in a thin layer and evenly, take a rectangle of fur, fold it in half, and stitch the two sides. You will get something like a bag. Put it on your hand and have fun painting the battery.
To get a beautiful bronze color, you need to mix black and red paint. If you wish, when decorating the battery, use spray paint.
If you have artistic abilities, then transform this heating device by drawing something suitable here. Look how nice these pencils look, each of them is made on a specific section of the battery.
If you have a modern radiator, turn it into a small piano by drawing the keys here.
If you want to cheer yourself up, then use paint in several colors. To create smooth transitions, you can mix color additives with white paint and change the consistency. So you will get lighter and more dark shades the same color.
This option and the other are suitable for those who are not confident in their artistic abilities. Draw white and black stripes on the protruding parts. Cut out a tail from cardboard, paint it, stick it in place and you have a zebra. If you want to go even further, make the head of this animal out of cardboard or plastic, decorate it, and attach it to the side of the battery opposite the tail.
If you have a modern battery that is time to upgrade, then take:
- acetone;
- stickers;
- scissors;
- soft cloth.
This is how the heating radiator is decorated. You can turn it not only into a blooming oasis, but also into a cozy fireplace.
Perhaps for some the radiator will become an imaginary cellar for storing wine.
This way you can decorate the battery in the nursery using large or small stickers.
But if your heating radiator is made of cast iron, this method of transforming it may not be suitable, since the surface is uneven and voluminous. In this case, it is better to repeat the following idea.
You can use stickers that will turn the battery into musical instrument. If you have an unnecessary button accordion whose bellows are torn, you can make another creative idea, glue one and the second part of the keyboard to the radiator.
Battery decor using decoupage technique
This option is also suitable for those who have long-lasting cast iron batteries. Here's how to do decoupage in this case. Take:
- decoupage cards;
- acrylic paints;
- sandpaper;
- decoupage varnish;
- PVA glue;
- brush;
- light enamel.
Enamel has a strong specific odor, so work in a ventilated area. It's even better if you cover your breathing organs with a respirator.
While the enamel is drying, open up the decoupage cards so that each piece covers part of the radiator. After the paint has dried, glue the prepared parts using PVA mixed with water.
If you want, leave the painted fragments (not decorated with a blend) light, cover them with white acrylic paint. You can use the same shade as in the picture; in this case, blue acrylic paint was used. Once any of these solutions are completely dry, coat the radiator with 2-3 coats of varnish, allowing each coat to dry.
You can use napkins for blending and decorate a heating device with them.
For this purpose it is taken only upper layer with a pattern, glued to a pre-painted, dried battery. After the glue has dried, to secure the decoupage, you need to cover the radiator with a couple of layers of varnish. But you need to choose one that can withstand the intense heat of the heating device.
If you want to give the batteries a chic look so that they look like antique ones, then use a self-hardening mass and a stencil to apply a design. Then cover with paint. Such stucco molding will adhere firmly to the battery, as it adheres well to similar metal surfaces.
The next type of radiator decoration is making a screen for it. Moreover decorative panel you can buy, there are some that are inexpensive, and make a box for it with your own hands.
Making a screen for decorating a battery
Before you start making it, prepare:
- waterproof plywood 2 cm 2 mm thick;
- paint;
- a slab of painted plywood, fine wood chips or edged boards;
- connecting elements size 50x32 mm made of pine;
- brackets;
- wood glue;
- screws;
- wooden corks dowels.
To enter the room in heating season If it doesn't get cool, when installing the screen you need to ensure that warm air circulates unhindered. To do this, space must be left between the battery and the screen.
Determine the size of the panels. You already know the width of the radiator, and if its height, as in the figure, is 72 cm, you need to add 8 cm for air circulation, so the height of the vertical panel will be 80 cm.
If the radiator has a temperature control, or a pipe fits here, then you need to determine where these components are located in order to then make cutouts in the screen edging at this place.
Now you need to attach connecting elements, which act as bars, to the vertical wooden sides using wood glue and wooden plugs or screws.
Attach the top panel to the sides.
If you make the front panel yourself, then use a horizontal strip 18 cm wide and two vertical strips, each 12 cm wide. They are attached to each other using holes and dowels.
Look in more detail at how panels need to be prepared for this. First, mark with a pencil where the end holes will be located. In another board you need to do them at the same level. Pour wood glue here, insert wooden plugs into the holes on one side first, then attach the second board. To ensure the attachment point is secure, carefully pull the two boards together by lightly tapping first one, then the other with a rubber mallet.
In the same way, you will attach the four horizontal crossbars using dowels and holes. Please note that 60mm wide gaps are left between the cross members for air circulation. You can make adjustments to these parameters or make the screen for the battery more elaborate, for example, by stuffing slats here in the form of a sheathing.
You have determined in advance where you need to make cutouts in the sidewalls. Using a drill attachment, complete this part of the job. To make the hole smoother, after cutting it with a hole saw, you need to process it with a hacksaw.
To install the battery screen, you need to provide it with support bars. First, they are fixed inside the screen at the top. Then you need to determine the location of the support strips on the wall, above the battery.
Determine the length of the support bar, do not forget to leave room for the tap that regulates the temperature. If it is located on the side, then leave a distance of at least 18 cm so that the support bar can move freely. If you wish, you can use a magnetic one instead of such a mount.
If you assemble the box yourself, and you already have a decorative panel, then the screen for the radiator may look like this.
Should I buy a false fireplace or make it myself?
This question invariably arises among those who want to create the atmosphere of a country house in a city apartment. At the same time, you can “kill” two birds with one stone, not only create such a piece of furniture, but also hide an unsightly battery. Not everyone has it under the windowsill; for some, this heating item is mounted almost in the most visible place in the room.
See how such an unsightly sight can be turned into a cozy, almost fairy-tale corner. To do this you will need some materials, these are:
- plywood 9 mm thick;
- wooden layout;
- bars with a cross section of 50 mm;
- self-tapping screws;
- fragment garden fence;
- construction glue gun;
- decorative plastic panel, where brickwork is shown;
- furniture stapler;
- stain;
- polyurethane skirting boards;
- putty;
- fine sandpaper;
- acrylic paint;
- brush;
- long lamp;
- bath stones.
Mark the location of the front part of the fireplace. Cut a rectangular hole in the center of the plywood.
With help furniture stapler attach a decorative panel to the center of the portal, trim it with a wooden layout, attaching these elements to a glue gun.
Paint furniture board stain, when it dries, attach it with self-tapping screws as a shelf on. Glue the polyurethane baseboard to where the plywood meets the floor and to the top. If they do not hold well here, then additionally secure them with self-tapping screws. You will cover these places with putty; when it dries, carefully go over it with fine sandpaper.
If it happens that there is no putty on the farm, you can replace it with sealant or liquid nails. After these dry soft materials, you need to make the surface even with sandpaper.
Now paint the fireplace portal with the first layer of white acrylic paint, when it dries, apply the second.
To simulate a fire, place a long lamp in the firebox so that you can plug it into an outlet. Nearby, closer to the viewer, you need to put stones for the bath. All that remains is to attach one more element - this is part of a decorative garden fence, in this case, it will serve as a metal lattice. In this case, you can even use a plastic fence, covering it with metallic or golden paint.
This is how unusual and very stylish a DIY battery decor can be.
This option is suitable for those who have a lot of heat in winter. It will not be cold in such a room, the radiator is closed, but warm air will escape through the rear side openings. But if the boiler room is not working at 100%, in the cold season you cannot do without a hot battery, then do not close it almost completely, as in the option presented above. The following idea will suit you.
To implement it you will use:
- drywall;
- metallic profile;
- self-tapping screws;
- drywall knife;
- putty;
- acrylic paint white and golden;
- sealant in a tube;
- construction gun;
- polyurethane skirting boards and glue for them.
- As in the first case, cut a hole in the drywall sheet. Make a base from a metal profile, attach a plasterboard blank to it using self-tapping screws. From the same material, make a rectangular shelf that will become the top of the false fireplace.
- In this part you need to connect the front and top elements by gluing here polyurethane skirting boards in front and two small ones on the sides. These same parts need to be attached between the floor and the sheet of drywall below.
- Put the sealant in the construction gun, feel like a real sculptor, as now you will make various monograms on the top of the fireplace. If something doesn’t work out, remove the excess before the composition hardens. The end of the extruded strip will be straight if you simply trim it with scissors.
- Allow the sealant to dry thoroughly. Now paint the fireplace portal with white acrylic paint in two layers. When it dries, take a thin brush and use it to paint the monograms golden paint. If you want to decorate the top of the fireplace, you can use a laminate board for this.
- Of course, the battery must also be painted in a suitable color.
Doing fireplace portal made of plasterboard, you can show your imagination. The inner hole does not have to be cut rectangular; it can be of a slightly different shape.
If desired, you can not only decorate the battery, but at the same time turn this part of the room into a comfortable table or cat bed. After all, these animals love to take a nap in the warmth and lie on the windowsill.
To implement this radiator decoration option, take:
- thick sheet of foam rubber;
- thick fabric;
- drywall;
- polyurethane ceiling plinth;
- drywall saw;
- acrylic paints;
- metallic profile;
- self-tapping screws
- Assemble a rectangular base from a metal profile, use self-tapping screws to attach it to the sides of the wall, top to the window sill, and bottom to the floor.
- Now, again using self-tapping screws, you need to attach a sheet of drywall to this metal base; of course, you first need to cut out windows of this size or smaller ones in it. You need to glue the baseboard onto the top of the drywall, and then paint this decorative element with white acrylic paint.
- Cut a sheet of foam rubber to the size of the window sill and sew a cover of thick fabric on it. Insert a zipper on one side so that this part of the mattress can be removed and washed. You can also make rollers from foam rubber. To do this, you need to connect the small edges of the rectangle and roll it up. A pre-sewn cover is placed on top.
If you attach shelves made of wooden planks to the side, then you can store newspapers, magazines and other small things here.
Here's how, if you wish, you can decorate the battery, turning this not always attractive element into an object of your joy and pride.
If you want to see a few examples of converting a radiator and window sill into a sleeping place, bench, table, then watch the following video collection.
If you want to carefully study how to decoupage a battery, then the next review is especially for you.
