- from the factory price we subtract a part (quite large) of our dealer discount;
- We minimize the cost of material delivery;
- Our warehouses are open at night because... night transport is cheaper;
- Delivery to the regions is carried out by factory vehicles.
We deliver Technoelast during the day and at night, it is possible different kinds car awnings (rear, side, top). For large orders we offer object discounts. We create prefabricated vehicles with different brands of TechnoNIKOL waterproofing. We successfully work with regions.
Technoelast marking
In order not to make a mistake with your choice, we suggest that you familiarize yourself with the product labeling:
- E, T, X– designation of the base on which the material is made, E - polyester, T - fiberglass, X - fiberglass;
- P, K- designation of the upper protective layer of the roll ( P-polyethylene film or K-stone chips);
- P- designation of the bottom protective layer of the roll (polyethylene film);
- Number at the end of the marking indicates the weight of one m2 of material (than higher figure, the thicker the material).
Varieties of Technoelast
- Technoelast P(lining) - for the bottom layer of roofing carpet and for waterproofing work for various purposes (internal and outer side rolls are protected with polyethylene film).
- Technoelast K(roofing) - for the top layer of the roofing carpet (in this case, the lower part of the roll is protected with plastic film, and the upper part is protected with coarse-grained coating of various colors).
Technoelast based fiberglass - this is Technoelast XPP, Technoelast Thermo XPP, used for waterproofing and roofing works on unloaded structures with a small slope, which during operation do not experience large tensile and tensile loads.
Technoelast based fiberglass- This Technoelast TKP, Technoelast Thermo TKP, It has best characteristics to break.
Technoelast based polyester - these are Technoelas EPP, Technoelast EKP, Technoelast Thermo EPP, Technoelast Thermo EKP, They have excellent tensile properties, therefore they are used in more critical areas of roofing and waterproofing. Special grades are used in accordance with the manufacturer's recommendations.
Production and use of Technoelast
Technoelast is produced by double-sided application of a bitumen-polymer binder consisting of bitumen, SBS (styrene-butadiene-styrene) polymer modifier and mineral filler (talc, dolomite, etc.) onto fiberglass, fiberglass or polyester. Coarse-grained and fine-grained dressings and polymer films are used as a protective layer.
Technoelast is one of the most the best materials Premium class, which are produced in Russia. Different brands Technoelast is used:
- for waterproofing the foundations of buildings and structures for various purposes;
- for waterproofing bridges, tunnels, overpasses, underground structures;
- for waterproofing flat roofs and low-slope roofs, as well as “breathable” and “green” roofs;
- to protect building foundations from radon and methane gas;
- for installing roofing carpet using a fire-free method;
- for roofing and insulation at facilities where increased heat resistance of materials is required (withstands heating up to 140 degrees);
Laying can be done all year round. Even with very low temperatures it does not lose its elasticity and strength, in the heat it does not stick together and does not “flow”.
Special brands of Technoelast
The Technonikol company produces special-purpose Technoelasts - this is waterproofing, which is designed to solve very specific problems.
- -bitumen-polymer waterproofing material that can withstand heating up to 130 degrees; no other roll has such heat resistance waterproofing material. Produced on a base of fiberglass and fiberglass. It is used for waterproofing in hot regions and places with high operating temperatures.
- - self-adhesive baseless bitumen-polymer hydro-vapor barrier material. Used for waterproofing shallow foundations, waterproofing interior spaces under screed, vapor barrier building structures. Installation using a fire-free method is possible at sites where the use of open flames is prohibited; installation on flammable substrates is possible.
- - bitumen-polymer waterproofing material intended for waterproofing reinforced concrete slabs of the roadway of bridge structures, for installing a protective adhesion layer on a steel orthotropic slab of spans of bridge structures, as well as for waterproofing spans with reinforced concrete slab roadways, on which the waterproofing is laid directly asphalt concrete pavement, including from cast mixtures with temperatures up to 220 °C.
- - this is a rolled spacer soundproofing material for soundproofing floors between floors of buildings. The material prevents the propagation of impact noise transmitted through load-bearing structures building.
- is a bitumen-polymer waterproofing material. It is used for waterproofing buildings and structures with gluing to mastic. This technology allows you to combine the advantages of waterproofing from roll materials (with high physical and mechanical properties) and seamless monolithic mastic waterproofing. Used for fire-free mastic installation.
- -bitumen-polymer waterproofing material. It has improved fire-technical characteristics according to SP 112.13330: flame propagation group RP1 (non-flame propagation); flammability group B2 (moderately flammable).
- - This is a rolled hydro-gas insulating material. Used for hydro- and gas insulation underground parts buildings and structures. Protects against exposure to radioactive gases, including Radon gas. It is used as an outer (ground-facing) layer in two-layer waterproofing.
If you still have questions about Technoelast roll waterproofing, call and ask our managers, we will try to answer everything.
BUY IN ONE PLACE, SAVE ON DELIVERY, TAKE USE OF REGULAR CUSTOMER DISCOUNTS
Retail price: on request
Technoelast EPP is a roofing lining and waterproofing material.
Purpose of Technoelast EPP
Installation of roofing carpet for structures (lining layer); waterproofing of building structures. Particularly recommended for use in structures subject to movement. Application: industrial roofs, loaded roofs, foundations, underground garages, boilers, subway vaults, swimming pools. Combines with Technoelast EKP. Used at temperatures down to -35 0C.
Structure of Technoelast EPP
In production Technoelast EPP applying bitumen-polymer binder (SBS modified bitumen, fillers) to the polyester base. There is a protective polyethylene film on both sides (to protect the material from sticking during storage and transportation). Durable, strong and elastic material, reliably protecting from moisture, bioresistant. Installation is carried out by fusing using a propane torch.
As a lower quality analogue, you can use Technoelast EKP
Technical characteristics
Weight of material, kg./sq.m. 4.6
Thickness, mm. 4
Material length/width, m. 10x1
- - in the transverse direction 400
- - in the longitudinal direction 600
Moisture absorption within 24 hours, by weight, % 1
Mass of binder on the welded side, kg./m2 2
Technoelast is biostable.
Application area:
Designed for waterproofing buildings, structures and building structures.
Structure:
Technoelast is produced by applying a bitumen-polymer binder on a glass or polyester base on both sides, consisting of bitumen, SBS (styrene-butadiene-styrene) polymer modifier and mineral filler (talc, dolomite, etc.). Coarse-grained and fine-grained dressings and polymer films are used as a protective layer.
Specifications:
Rolls of material should be stored in a dry indoors in a vertical position in one row in height at a distance of at least 1 m from heating devices.
Brands:
Depending on the type of coating and area of application, Technoelast is available in two grades:
Technoelast K— with coarse-grained coating on the front side and a polymer film or fine-grained coating on the surfaced side of the web; used to install the top layer of waterproofing with protection from sunlight;
Technoelast P— with fine-grained powder or polymer film, or a combination thereof on both sides of the canvas; used for the installation of lower layers in multi-layer waterproofing of building structures (foundations, tunnels, roofs, etc.).
Technoelast is biostable.
EPP
HPP
ECP
TCH
Table of Material Characteristics:
| Parameter name | EPP | HPP | ECP | TCH | |
| Thickness (±0.1), mm | 4,0 | 3,0 | 4,2 | 4,2 | |
| Weight 1 m2, kg, (±0.25 kg) | 4,95 | 3,88 | 5,25 | 5,32 | |
| Breaking force in longitudinal/transverse direction, N, not less | polyester | 600/400 | - | 600/400 | - |
| fiberglass | - | - | - | 800/900 | |
| fiberglass | - | 300/– | - | - | |
| Flexibility temperature on timber R=25 mm and R=10 mm, °C, not higher | -25 | -25 | |||
| Heat resistance, °C, not less | 100 | 100 | 100 | 100 | |
| Type of protective coating | upper side | film without logo | film without logo | slate | slate |
| welded side | film with logo | film with logo | film with logo | film with logo | |
| Length/width, m | 10x1 | 10x1 | 10x1 | 10x1 | |
| Weight of binder on the welded side, kg/sq.m., not less | 2 | 2,0 | 2 | 2 | |
| Water absorption for 24 hours, % by weight, no more | 1 | 1 | 1 | 1 | |
| Waterproof at a pressure of at least 0.2 MPa, for 2 hours | absolute | absolute | |||
| Loss of powder, g/sample, no more | 1 | 1 | |||
| Waterproof for 72 hours at a pressure of at least 0.001 MPa | absolute | absolute | |||
| Flexibility temperature** on timber R=25 mm, оС, not higher | -25 | ||||
| Flexibility temperature on timber R=25mm, оС, not higher | -25 |
Manufacturing jobs:
According to the “Guidelines for the design and installation of roofs made of bituminous materials from the roofing company TechnoNIKOL”, it can be used in all climatic regions according to SNiP 23–01.
TechnoNIKOL Corporation offers modern Construction Materials, meeting Russian and European quality standards, which include roofing roll materials, waterproofing mastics, bitumen, materials for polymer roofing.
Technoelast is biostable.
Application area:
Designed for waterproofing buildings, structures and building structures.
Structure:
Technoelast is produced by applying a bitumen-polymer binder on a glass or polyester base on both sides, consisting of bitumen, SBS (styrene-butadiene-styrene) polymer modifier and mineral filler (talc, dolomite, etc.). Coarse-grained and fine-grained dressings and polymer films are used as a protective layer.
Specifications:
Rolls of material must be stored in a dry, closed room in a vertical position in one row in height at a distance of at least 1 m from heating devices.
Brands:
Depending on the type of coating and area of application, Technoelast is available in two grades:
Technoelast K— with coarse-grained coating on the front side and a polymer film or fine-grained coating on the surfaced side of the web; used to install the top layer of waterproofing with protection from sunlight;
Technoelast P— with fine-grained powder or polymer film, or a combination thereof on both sides of the canvas; used for the installation of lower layers in multi-layer waterproofing of building structures (foundations, tunnels, roofs, etc.).
Technoelast is biostable.
EPP
HPP
ECP
TCH
Table of Material Characteristics:
| Parameter name | EPP | HPP | ECP | TCH | |
| Thickness (±0.1), mm | 4,0 | 3,0 | 4,2 | 4,2 | |
| Weight 1 m2, kg, (±0.25 kg) | 4,95 | 3,88 | 5,25 | 5,32 | |
| Breaking force in longitudinal/transverse direction, N, not less | polyester | 600/400 | - | 600/400 | - |
| fiberglass | - | - | - | 800/900 | |
| fiberglass | - | 300/– | - | - | |
| Flexibility temperature on timber R=25 mm and R=10 mm, °C, not higher | -25 | -25 | |||
| Heat resistance, °C, not less | 100 | 100 | 100 | 100 | |
| Type of protective coating | upper side | film without logo | film without logo | slate | slate |
| welded side | film with logo | film with logo | film with logo | film with logo | |
| Length/width, m | 10x1 | 10x1 | 10x1 | 10x1 | |
| Weight of binder on the welded side, kg/sq.m., not less | 2 | 2,0 | 2 | 2 | |
| Water absorption for 24 hours, % by weight, no more | 1 | 1 | 1 | 1 | |
| Waterproof at a pressure of at least 0.2 MPa, for 2 hours | absolute | absolute | |||
| Loss of powder, g/sample, no more | 1 | 1 | |||
| Waterproof for 72 hours at a pressure of at least 0.001 MPa | absolute | absolute | |||
| Flexibility temperature** on timber R=25 mm, оС, not higher | -25 | ||||
| Flexibility temperature on timber R=25mm, оС, not higher | -25 |
Manufacturing jobs:
According to the “Guidelines for the design and installation of roofs made of bituminous materials from the roofing company TechnoNIKOL”, it can be used in all climatic regions according to SNiP 23–01.
TechnoNIKOL Corporation offers modern building materials that meet Russian and European quality standards, which include roofing roll materials, waterproofing mastics, bitumen, materials for polymer roofing.
Technoelast from TechnoNIKOL is an affordable, easy-to-install and resistant to the most severe operating conditions waterproofing and roofing material domestic production. Today it is one of the most technologically advanced, not only in Russia, but also in the world as a whole, being widely used where others are unsuitable.As for the prices, m2 of EPP technoelast, however, they remain average, which makes it in demand in the construction of a wide variety of buildings and structures, regardless of their purpose and technical characteristics. This is no less due to the simplicity of its design, which includes:
Base made of polyester, fiberglass or fiberglass;
Waterproofing layers made of bitumen-polymer composite;
Protective layers of polymer film and/or coarse slate coating.
Before you buy Technoelast, decide on its brand
from TechnoNIKOL also stands out for its variety of brands, which are divided into two categories:Universal (intended for use in standard conditions);
Special (used in special conditions or having special properties).
Below we will look at the standard varieties of this material, of which four types are commercially produced:
Technoelast EPP - the base of the material is represented by a sheet of polyester, polymer film is used as protective layers (for the top layer without a logo, for the bottom - with it), thickness 4.0 mm, weight 4.95 kg;
Technoelast XPP - the basis of the material is fiberglass, the protective layers are again sheets of polymer film (the top one without a logo, the bottom one with it), thickness 3.0 mm, weight 3.90 kg;
Technoelast is a material with a polyester base, its upper (front) protective layer is formed by coarse-grained slate coating, the lower one - by a polymer film, thickness 4.2 mm, weight 5.2 kg;
Technoelast TKP is a material based on fiberglass, coarse-grained slate coating is used to protect its upper side, and a polymer film with a logo is used on the lower side, thickness 4.2 mm, weight 5.2 kg.
Technoelast EPP is a leader among leaders
Among the above waterproofing materials from TechnoNIKOL, Technoelast stands out in many ways, but most of all, of course, in price. Technoelast EPP, as mentioned above, is made on the basis of polyester, also sometimes called polyester, which today is cheaper than fiberglass, and even more so fiberglass.The low price of Technoelast EPP, it should be noted, does not prevent it from having not only excellent tensile strength, but also quite good elongation, which is especially appreciated when installing roofing carpet in critical areas flat roofs. For comparison: the elongation of fiberglass and fiberglass is only 1.5%, while for polyester this figure reaches 30!
Photo by Technoelast:
.jpg)
For waterproofing needs, Technoelast is no less good. Waterproofing, by the way, can be carried out by him in relation to any building structures - foundations, walls, floors, and roofs - as well as above-ground and underground pipeline communications. Including transmitting heated media, because the heat resistance of this material reaches 100 C.
Roofing carpet made of Technoelast TechnoNIKOL
Are you planning to buy Technoelast for your device? soft roof? Then you should know that the latter can be mounted from this waterproofing material only in two layers and no other. Its lower (lining) layer is made of material with the EPP index; for the upper (cover) layer, ECP is used. Attention: the layers are laid perpendicular to each other.The price of Technoelast EKP is higher (this is due to the presence of a protective layer of coarse shale topping) than that of EPP, although not by much. As for the laying technology, in this regard they are the same, although with lining layers always more problems, because they are mounted directly on the base, which is rarely ideal.
Electronic store website: always affordable prices
Moreover, absolutely for any Technoelast - for HPP, for TKP, for EKP, for EPP, as well as for a number of special varieties of this waterproofing material. Regardless of what kind of Technoelast you need now, its price per m2 will probably not upset you and will not seem excessive or overpriced. Do you think this doesn’t happen nowadays?In the electronic store GidroiSOL.ru this is the norm, which, importantly, applies not only to Technoelast alone. Prices of propane torches used for its fusing, and bitumen mastic, which is irreplaceable if roll waterproofing you prefer not to fuse, but to glue, we calculate according to the same schemes!
