It is known that fur products look beautiful and luxurious and provide good warmth in the winter cold. Like any clothing, they lose their shine over time. appearance. If your favorite thing has faded or is simply boring, you can paint it at home without turning to specialists, thereby turning it into something new and unique.
How to dye arctic fox fur at home
Arctic fox fur lends itself well to dyeing. If you want to upgrade your Arctic fox item, you will need:
- hair dye;
- fatty cream (can be replaced with glycerin);
- hair balm;
- rubber medical gloves;
- a brush or an old toothbrush for applying the coloring composition;
- vinegar.
Your actions:
- Lubricate the inside with cream.
- Stretch the material on a flat surface and secure it.
- Thoroughly moisten the previously cleaned surface with water.
- Wear gloves and apply quickly coloring composition, smoothing the pile with your hand.
- Wait for the period of time specified in the dye instructions.
- Rinse the lint under running warm water and rinse in a vinegar solution.
- Treat the item with balm diluted in water and rinse.
- Lubricate the inside again with cream, carefully stretch it, pin it with pins, and let it dry.
Dyeing a mink coat
The mink coat looks great and is durable. If the color of the product has faded, you can dye the mink fur. Before you dye mink fur at home, prepare:
- hair dye;
- spray;
- a comb with fine teeth;
- shampoo;
- hair balm;
- fatty cream (glycerin is possible).
Your actions:
- Clean the item from grease and dirt.
- Treat the flesh with cream.
- Prepare the coloring composition according to the instructions.
- Lightly moisten the surface with water using a spray bottle.
- Apply the dye to the pile with a spray bottle from a distance of 50 cm.
- Even out the tone by combing the surface with a comb.
- Wait half an hour.
- Rinse off the coloring composition with warm water and shampoo.
- Rinse with balm diluted in water.
- Apply the cream to the flesh.
- Lay out the product and leave it to dry.
- Comb the fibers in the desired direction.
Fur cleaning
Before you dye your fur at home, you need to clean it. Paint particles have difficulty penetrating greasy, contaminated pile. Before dyeing a fur coat or other fur item, you should clean the product with an alkaline solution. To do this you will need:
- water – 1 l;
- salt – 2 tsp;
- ammonia – 1 tsp;
- detergent(dishwashing gel, washing powder) – 1 tsp;
- baking soda– 2 tsp.
Your actions:
- Dissolve the ingredients in water, stir well until smooth.
- Treat the flesh with a rich cream (possibly glycerin) to prevent drying out.
- Apply the resulting solution evenly to the pile using a brush.
- Rinse thoroughly under running water.
- Lay the item out and let it dry at room temperature.
Coloring fur with hair dye
The structure of natural fur pile resembles human hair. Therefore, hair dye is suitable for home dyeing. This drug can be purchased at any supermarket, store household chemicals. The choice of colors and shades is varied, and it will not be difficult for you to find the right tone. It is better to choose shades darker than the original color, for example, black. To give something a light shade, you need to bleach it by treating it with a solution of hydrogen peroxide. Dyeing fur with this product is simple and reminiscent of the procedure for coloring your own curls.
Spray for coloring fur
Another product intended for dyeing at home is a special spray. This product is used to add tint to long ends. The undercoat and undercoat are not affected. The dye dissipates at a distance of 60-70 cm. The can should be moved slowly and measuredly to distribute the substance evenly. The painted area should be combed immediately to remove excess product and prevent the fibers from sticking together.
Video: is it possible to dye a mink coat?
The portal contains addresses and telephone numbers of Moscow studios where you can order fur dyeing. Prices for the service are presented in tables convenient for comparison. Thus, you can compare the cost of services in different studios and find best option. The portal contains reviews from visitors who have already contacted the studio or salon. This will help you find really decent seamstresses and tailors.
Which studio in Moscow is best for fur dyeing?
Fur dyeing helps restore the former beauty of hats, fur coats and fur capes, eliminates yellowing and fading, and renews the appearance of the product. If the fur on an old fur coat has a good finish, but the color has already become ugly, it is better to contact good master and carry out restoration, and not throw away or put the thing in a distant closet. Where can you dye fur with high quality, and how much will it cost?
Prices for painting fur and deadlines for completing the work
Fur products are dyed in the studio different ways, the most expensive is a gradient, and the cheapest is toning. In the first case, two-color painting is used; not every master can make a beautiful transition between colors. For difficult work You shouldn’t skimp on a specialist. A simple option is tinting, which simply gives the fur a more saturated shade and restores its shine. Such restoration can be ordered at any specialized studio for working with fur products.
Average prices are:
- Toning: from 1700 rub. for hats, from 1500 rub. for collars and cuffs, from 3500 rub. for vests and capes, from 5000 rub. for fur coats
- Coloring is calculated individually, but if there is no color change, then prices are approximately 100-200 rubles. more expensive than tinting.
Dyeing natural or faux fur takes a little time, on average 1-2 hours, it depends on the skills of the artist and the area of the product. It is faster to dye a small hat than a large, voluminous fur coat.
Unfortunately, in many studios in Moscow there are queues of clients, especially for competent furriers, so it is better to make an appointment in advance. In the table you can find the company closest to you, its opening hours and contact phone number.
What is important for the customer to know?
There are a number of cases when companies refuse to paint a client, and this is due to compliance with technological standards. The restoration goes like this:
- The lining is ripped out and the condition of the fur is checked. If the reaction is normal when moistened, then the item will be taken to work; if the subcutaneous part of the skin begins to peel off and deform, then the master will refuse. Most often, they do not take into work products that are more than 15 years old.
- It happens that after painting there is shrinkage, and you need to recut it according to your figure. The specialist should warn about such things, since for the client this is from 2 to 10 thousand additional expenses.
A fur product is purchased taking into account the fact that it will last for many years. Unfortunately, even expensive things can fade. The fur coat or vest itself is still in good condition, but its appearance leaves much to be desired. What to do with such a thing? A fur product that has lost its color should be dyed. That is why women need to figure out how to update their fur coat.
Having discovered their favorite fur coat without the original color, many ladies are very worried. Don't be upset, because the situation can be corrected, dyeing the fur. To cope with the task, you first need to decide on the color, and then on the painting method.
It is important to follow the painting instructions. If you don't do this, you can simply ruin your fur coat. In addition, it is worth remembering that before starting the painting process, the product is prepared.
Methods for dyeing fur
Modern means allow you to dye fur in any color.
Currently, there are four popular ways to dye a fur product, these include:
- Namaz method. The method involves applying paint using a brush or a bunch of feathers. Excess paint is removed by centrifugation.
- Fur gilding. A similar method involves bleaching the pile. It is best to use this method if you want to paint a raccoon, arctic fox, mink or fox.
- Dipping method. This is the most common method of dyeing fur coats. The product is completely immersed in paint and remains in place until it is painted.
- Combined method. In this way you can imitate the fur of a wild animal.
Regardless of the method chosen, the housewife must follow the instructions. Only consistent adherence to the steps will allow the product to be painted correctly.
You can create your own image
Coloring stages
Women who decide to dye a fur product should immediately understand that the dyeing process consists of several stages. If one of the steps is performed incorrectly or completely missed, the fur coat will not be painted accurately.
The painting process consists of preparation and painting. Each stage should be given Special attention. Only in this case can we hope for a positive result.
Fur cleaning
Despite the fact that you can dye a fur product yourself, you cannot immediately proceed to the dyeing process. You must first prepare your fur coat.
To do this, the fur product is cleaned of contamination. This can be done using an alkaline solution. To prepare the solution, you need to mix 3 teaspoons table salt, 1 teaspoon of dishwashing detergent, 2 teaspoons of baking soda, 1 teaspoon of ammonia solution with 1 liter. water. The resulting solution is applied to the fur product using brushes. After this, the product is washed and dried.
At the next stage of cleaning, it is necessary to process inner part fur. To do this, it is recommended to use glycerin or fatty cream. This treatment will protect the fur from drying out.
Coloring
Painting a fur product usually takes no more than 50 minutes. The owner just needs
Piece of art
decide on the method of painting the product. Some ladies prefer to dye their fur coats with hair dyes, while others prefer sprays for dyeing fur products. Each coloring method has its own characteristics.
Spray for painting fur
You can dye a fur product using a special spray. Thanks to this product, you can give color to long ends. The spray cannot stain the undercoat and undercoat.
When spraying, the can of paint must be kept at a distance of 65 centimeters from the fur coat. In this case, the can moves slowly, without sudden movements. If you make chaotic movements, the product will be painted unevenly. Immediately after dyeing, the fur is combed. This way, excess paint can be removed.
You can also use simple aerosol can. This method It may be cheaper, but more effective. It is also worth remembering that you do not need to paint the entire product, but only those places that have lost their original appearance.
The same case when both a fur coat and hair are dyed with hair dye
Paint for painting
The most popular way to dye fur is to use hair dyes. It should be noted that the dyeing process is carried out only on treated fur. When painting, you should pay attention to all layers of fur. Don't forget about the meat.
To distribute the paint evenly over the product, you need to knead the fur with your hands. The paint acts on the product for 40 minutes. After this, the fur must be held under running warm water. To consolidate the effect, the fur coat can be placed in a saline solution for 10 minutes. When the dyeing process is completed, the fur coat must be dried by laying it on a horizontal surface.
How to dye arctic fox fur at home
Some women are interested in the question of how to dye a fur coat at home if it is made from Arctic fox? Like any other fur, the Arctic fox must first be processed. It should be noted that it is better to paint the white Arctic fox in light colors. If desired, dark furs can be dyed in light colors, but then they will first need to be decolorize with hydrogen peroxide.
Before you start dyeing, you need to test the fur. To do this, a little paint is applied to the pile of the product. If nothing serious happens to it, you can start painting.
It is best to buy 2 more packs of paint. You should paint your fur coat with a brush, after wearing rubber gloves. After painting, it pours onto the product warm water. The last stage painting is drying. The product is placed on a horizontal surface far away from heating devices .
How to dye mink fur at home
Many women are interested in the question of how to dye mink fur? In fact, there is nothing complicated. To dye mink, you can use both hair dye and sprays. If paint is used, then it can be applied to the product with a brush or toothbrush. You can evenly distribute the paint with your hands. After 40 minutes, the paint must be washed off under the pressure of warm water.
Drying is carried out in the same way as when painting other things. A mink vest or fur coat is stretched on a horizontal surface, away from heating appliances. You can use a hair dryer for quick drying. However, remember that first of all, you should dye fur precisely in order to return the product to its original appearance, and not to change it.
Have you ever thought about how to dye fur at home? But surely every modern fashionista has a vest, sheepskin coat or fur coat made of natural or faux fur in her wardrobe. During use, the fur can change its original appearance, fade in the sun, and perhaps you will come up with the idea of changing the appearance of the old thing. Today, service organizations, represented in sufficient numbers, provide a full range of fur dyeing services, but, unfortunately, with an impressive cost, they do not always meet customer expectations. That is why the question of how to dye fur at home, whether it is even possible to carry out this procedure yourself, is very common today. We will talk about it within the framework of this material.
Preparatory activities
The success of the “operation” largely depends on how well the preparatory measures are carried out. When you decide to update the shade of your fur or radically change it, do not forget to clean it, because dirt prevents deep penetration dye, accordingly, affects the result of staining.
To clean, you will need an alkaline solution made from a liter of water, 2 teaspoons of soda, 1 teaspoon of any dishwashing detergent and 1 teaspoon of ammonia, which can be purchased at your nearest pharmacy. All components must be thoroughly mixed together until a homogeneous mass is obtained. To prevent drying out, apply a rich cream, such as baby cream, to the inner layer (the bottom layer of the skin). Then, armed with a brush with stiff bristles, you should apply an alkaline solution to the fur, distributing it over the entire surface, and then rinse the product thoroughly under running water. running water and lay in a horizontal position to dry.
What to paint with?
If you don’t know how to dye fur at home or what products to use, you’ve come to exactly the right place. Today, specialized stores offer quite a few professional dyes and compositions, but hair dye is still no less effective and affordable. You can find it in any supermarket at affordable price, and the variety of shades allows you to satisfy the taste preferences of every fashionista.
So, for dyeing you will need paint, a brush with which you will apply the composition to the fur and, of course, rubber gloves - an indispensable tool protection. When choosing a brush, give preference to one with stiff bristles.
Arctic fox fur
How to dye arctic fox fur at home? Luxurious vests made from arctic fox skins have been a trend for the last few years. They will be relevant in the near future, which is why owners of such luxury need to properly care for it: update the shade of the fur every season, clean it. In addition, modern dyes allow, if necessary, to radically change the color of a fur product. So why not take advantage of this opportunity?
Deciding on the shade
If you don't know how to paint natural fur at home, in particular, arctic fox fur, it is important to become familiar with some of the nuances of the procedure. They are primarily associated with the structural features of the fur. Of course, the choice of shade lies on the shoulders of the owner of the fur product, but professionals strongly recommend dyeing arctic fox fur in dark shades. If, on the contrary, you want to lighten the product, you will have to pre-treat the fur with hydrogen peroxide.
Let's start painting
To get maximum results, wet the arctic fox fur with water, then begin applying the coloring composition, paying attention to each area. After the entire composition has been applied, it is necessary to maintain the time indicated on the packaging. After this, it is enough to rinse the product under running water and dry it, placing it in a natural horizontal position.
Mink
Mink hair is identical in structure to human hair, which is why the choice of dye for mink should be more demanding. The same hair dye is perfect, but it is better to give preference to the professional series, which will give the most natural shade possible, and will last much longer than budget analogues. But some people recommend using spray paints. IN in this case The paint must be applied from a distance of 60-70 cm in several layers. Don’t be afraid to layer the paint - this technology will allow you to achieve an expressive and deep noble shade.
If you are looking for an answer to the question of how to dye mink fur at home, use general rules, working with any fur. In all respects, the dyeing procedure completely repeats the procedure for transforming arctic fox fur described above.
Mouton fur
This once most popular type of fur is still relevant today. Its popularity is largely due to the warmth and comfort that a product made from mouton fur gives. But not everyone knows how to properly care for fur, which is why, over time, there is a need for additional coloring.
Mouton products are rightfully one of the most unpretentious, but when it comes to coloring, you should be patient, be extremely careful and careful. How to dye fur at home with paint in the case of a mouton. The pile of such fur is quite thick and dense, which is why it is so important to evenly distribute the coloring composition over the entire surface.
And one more thing: test before painting a small amount of pigment on small area fur product - if stains and bald spots appear, it is better to abandon the idea of dyeing it yourself and entrust it to professionals.
Artificial fur
Do you think only natural fur evokes admiration and admiring glances from others? For several years, faux fur products: bright, sometimes extravagant and quite affordable models, have been revolutionizing the entire idea of fashion, beauty and luxury. If you have a jacket or bag made from this material in your wardrobe, update it with dyeing. Want to know how to dye faux fur at home? We'll tell you about it.
For coloring is suitable the same hair dye - in the case of faux fur, you can experiment, give preference to brighter, acidic shades. For preliminary preparation An ordinary soap solution is suitable, which is applied with a sponge over the entire surface of the product.
In order to get an ideal result, before painting, do not just lay the product in a horizontal position, but also stretch it well. This will help avoid the formation of bald spots.
Let's sum it up
We tried to figure out how to dye fur at home, and listed several of the most effective ways. With proper approach to the procedure, use quality materials and tools you can achieve amazing results. In addition, dyeing fur, both natural and artificial, at home will not take you much time and, most importantly, money. We hope that you will appreciate the information presented and be sure to take advantage of our tips and recommendations.
Dear Clients
Prepayment for sewing products is not less than 50% of the cost of work.
The Lynx factory also offers additional services, such as painting, cutting and hauling.
Dye furs are produced in different colors. We dye both individual skins and finished fur products (we don’t paint sheepskin coats) .
When painting finished fur products, be careful. Paint happens without fabric lining, only skins are dyed. Before painting, you are checked to see if it can be painted.
If you wish, you can check it yourself : Take your fur item that you want to dye, lightly peel off the lining and wet the skin well. After this, forcefully pull the soaked skin into different sides, if the skin is torn, it means that low-quality workmanship was used in sewing and when painting your product may fall apart - paint it IT IS FORBIDDEN, if the skin easily stretches to the sides - paint CAN .
We warn you in advance, when sewing a fur product, many companies often stretch the skin to make it larger, such things after painting I can shrink up to 30% .
Painting of fur products
|
Name (painted black, brown, graphite) |
Price in Malakhovka |
|
Skins:
|
|
|
Beaver (not shorn) |
95 rub. dm 2 |
|
Beaver (shorn) |
65 rub. dm 2 |
|
Long fur (fox, arctic fox, etc.) |
580 rub. dm 2 |
|
Short fur (marten, mink, sable, polecat, etc.) |
525 rub. dm 2 |
|
Plates (astrakhan fur, mink) |
65 rub. dm 2 |
|
Products:
|
|
| Vest |
7,000 rub. |
|
Jacket (length up to 65 cm.) |
8,000 rub. |
|
Short fur coat (length up to 90 cm.) without hood, excluding restoration |
12,000 rub. |
|
Short fur coat (length up to 105 cm.) without hood, excluding restoration |
16,000 rub. |
|
Flare
(for vests, jackets and short fur coats) |
+ from 10 - 30% to the price for dyeing depending on the length of the product |
|
Straight fur coat (length from 110 cm.) without hood, excluding restoration |
18,000 rub. |
|
Flared fur coat (length from 110cm.) excluding restoration |
23,500 rub. |
|
Hood, excluding restoration |
3,000 rub. |
|
Collars, cuffs, trims (long fur) excluding restoration |
95 rub. dm 2 |
|
Collars, cuffs, trims (short fur) excluding restoration |
65 rub. dm 2 |
|
Hats, excluding restoration |
1,300 rub. |
SHEEPSKIN COATS, SHEEPSKIN (NOT SHEARED) AND LEATHER - WE DO NOT DYE!
- Painting time 2 weeks
- Shrinkage of a fur product during painting 30% (1 size)
- Shrinkage during dyeing always occurs and the product shrinks unevenly
- It is necessary to restore (restore) the product after dyeing Necessarily!
Restoration of products after dyeing
Size In Malakhovka Vest 10,000 rub. Jacket (length up to 65 cm) from 15,000 to 18,000 rub. Short fur coat (length up to 90 cm) from 18,000 to 20,000 rub. Short fur coat (up to 105 cm) from 20,000 to 23,000 rub. Long fur coat (from 110 cm) 25,000 rub. Cover with new lining 25,000 rub. Flare (depending on the length of the product) from 10 - 30% Hood 2,000 rub. Prices do not include the cost of the stock (up to size 50)
A little history about dyeing coats, fur and skins
Animal fur has been necessary for humanity throughout the history of its existence. And today fur remains valuable and commercially profitable product, because it is used not only for warmth, but also for decoration and, undoubtedly, is a luxury item.
The skins of fur-bearing animals consist of a dense undercoat and longer, stiffer hairs that rise above this layer. The main function of the undercoat is to maintain the animal's body temperature, and the longer guard hair is to protect the skin during rain or snow. Fur pelts are mainly sold at auction. Most of them are bought back manufacturing companies, specializing in sewing products using fur or brokers. The largest auction centers are located in New York, Montreal and St. Petersburg.
In the modern fur industry, fur is used for sewing or decorating outerwear. Often, in order for the finishing color to go well with the color of the main material of the product, it is used fur dyeing in different tones. High quality dressing and dyeing fur is very important, because this will determine how long the product made from it will last. Many people are interested in the question: is it possible dye the fur so that it does not lose its quality? Certainly! Moreover, if painting skins was produced in compliance with the necessary technology, the fur can last longer. That's how dye natural fur Only professionals know how to ensure that the skins remain soft and elastic. Sometimes the fur, on the contrary, is bleached or this method is used dyeing natural fur, in which only longer hairs are shaded. This is exactly what happens in some cases silver fox fur dyeing. Same method can you dye arctic fox fur and give the product a very original look. When sewing a mink coat or coat, it is also advisable dyeing fur or mink coat in one color, if there are skins that are identical in softness, length of pile and density of the undercoat, but initially different in color.
Selecting skins for a product is not an easy task and requires a lot of furrier experience. The advantage of fur material is that, if necessary, you can replace pieces with defects with others that are ideal for the main raw material. In such cases it may also be necessary dye mink fur, arctic fox or other fur-bearing animal to match the color of the skins that were selected for the product. It is possible to give a fresh look to a coat or fur coat that has been worn for several years if dye old fur into a different, more saturated shade. A competent selection of fur makes the fur coat look like it was sewn from one large skin, without focusing on the joining of different fragments.
Information about where can you dye fur, now it won’t be difficult to find. It is important to turn to professionals, because such material is quite expensive and requires a special approach. Usually these are special workshops or fur dyeing studio. Such organizations have special equipment and, most importantly, great experience in working with different types fur, so you should have no doubts, where to dye real fur .
Fur skins can be dyed in different ways. The main ones are namazny, okunochny or combined. In each individual case, the most optimal of them is used.
Where to dye fur in Moscow can be found out from various sources. It should be taken into account that this procedure is quite expensive and only a high-quality service can guarantee good result and don't disappoint. Therefore, trust only verified sources , in such a non-standard type of service as fur dyeing in Moscow . Fur dyeing price will depend on several factors: the painting method and the used chemicals, (size, length, style) if this is a product.
Examples of fur and skin dyeing work
