In the survey of provision of water supply, sewerage and heating systems affects every owner of suburban real estate. Lack of plumbing facilities or problems engineering systems- fixable!
The primary importance of serviceability and uninterrupted operation water supply, sewerage and heating systems are clear to every owner of a cottage or country house Therefore, when improving and repairing housing, it is the stage of plumbing work and electrification of the building that is very important.
The long-term trouble-free operational period depends on the proper placement of sanitary communications, installation and connection of plumbing fixtures.
Cost of plumbing and engineering work in a cottage
Plumbing work in country house or cottage have their own specifics: firstly, it is a complex complex of interconnected external and internal engineering networks, and secondly, the installation of individual heating. All this should be done by a professional contingent of experienced plumbers with the appropriate equipment.
Introducing approximate calculation prices of the services we provide:
We discuss reasonable
discountsDesign of plumbing engineering systems for a country house
The performance of utility networks is determined not only by the quality of the plumbing work performed, but also by a professional approach to preliminary calculations and system design. When selecting plumbing equipment, system water pressure and other specific nuances are taken into account.
* Types of plumbing work in a cottage or country house include: complex organization and installation of all interconnected engineering systems.
Typical works include:
- Design of water supply, sewerage, heating systems
- Installation (replacement) of water supply, sewerage, heating systems
- Boiler room installation
- Installation of a water-heated floor system
- Installation and connection of plumbing fixtures
- Installation of fine and coarse filters
Possible free
callHeating, warm water floors and sewerage in the cottage
Completed: Replacement of heating and water supply from polypropylene to cross-linked polyethylene (Rehau) and installation of sewerage in the house. It became much more comfortable.
Specifics of plumbing work in a timber house
Installation and installation of plumbing in a timber house requires care, since basically everything is attached in an open (visible) way to the surface of the walls or floor. The plumber is required to be highly qualified to skillfully install pipes and equipment with a minimum number of fasteners, so as not to spoil the aesthetic appearance of the wall or flooring. If your house is still under construction, then a number of plumbing works need to be completed before installing the floor structure.
By contacting our company, you receive a service of qualified plumbing work of any degree of complexity.
Balance Ratio cost and quality- more than IDEAL! We present to your attention a short list of plumbing works; for a more extensive acquaintance with prices, follow the link: Detailed price list.
Brief price list for plumbing work in cottages
| Name of works | units change | Price, rub.) |
|---|---|---|
| Plumbing services for a private home: |
||
| Installation of sewer point | dot | 450 rub. |
| Installation of a heating point | dot | from 2000 rub. |
| Installation of distribution pipe manifold | exit | from 250 rub. |
| Installation hidden system installations for built-in faucets | PC. | 1,850 rub. |
| Installation of a hidden installation system for wall-mounted plumbing fixtures | PC. | 1,850 rub. |
| Installation copper pipes water supply, heating | m.p. | from 150 rub. |
| Installation metal-plastic pipes water supply, heating | m.p. | from 220 rub. |
| Installation polypropylene pipes water supply, heating | m.p. | from 220 rub. |
| Installation of a coarse filter | PC. | 550 rub. |
| Installation of a fine filter | PC. | 750 rub. |
| Installation acrylic bathtub(standard) including harness | PC. | 2,800 rub. |
| Installation steel bath including harness | PC. | 2,500 rub. |
| Installation cast iron bath including harness | PC. | 3,300 rub. |
| Installation of a shower cabin | PC. | from 4,000 rub. |
| Mounting a "moidodyr" without an upper cabinet or mirror | PC. | 2,400 rub. |
| Mounting "moydodyr" with top cabinet and/or mirror | PC. | 3,200 rub. |
| Installation of a bidet installation system, wall-mounted toilet | PC. | 3400-4000 rub. |
| Installation of a floor-mounted toilet kit with a cistern (with assembly) | PC. | 1300-2000 rub. |
| Installation of a floor bidet | PC. | 1000-1500 rub. |
| Urinal installation | PC. | 1,400 rub. |
| Installation of a heated towel rail on a finished connection | PC. | 1,200 rub. |
| Installation of a heated towel rail with liner | PC. | 3,600 rub. |
| Installation of a heating radiator on a ready-made supply line | PC. | 1,300 rub. |
| Installation of a heating radiator with liner | PC. | RUB 3,800 |
| Installation of taps for heated towel rails | PC. | 500 rub. |
| Installation of taps for heating radiators | PC. | 600 rub. |
| Installation of a circulation pump | PC. | 1,500 rub. |
Can you imagine your daily life without cold and hot water, sewer system, and in the cold season - without radiator heating? If not, then call!
COMPLETED WORKS
Do you want to visit our facilities and meet a competent foreman along the way? Then take the first step!
If in the past the question of how to renovate a bathroom in wooden house, represented a real problem (after all, any finishing materials suffered from the abundance of steam and moisture and gradually became unusable), then today chemistry building materials reached a new level. As a result, the problem is no longer as acute as before.
In this article, together with the specialists of the Teplo Doma company, who know everything about how to repair a bathtub in a wooden house in Moscow, we will try to understand the features of the reconstruction of this room. In the same review, we will familiarize ourselves with materials whose use is justified for operation in variable temperature and humidity conditions and.
Where to begin?
Most wooden houses ceilings and floors on the ground are wooden, respectively, all structural elements are made from this raw material. However, for modern finishing technologies this is not an obstacle: if desired, such a surface can even be tiled. Tiles in a bathroom in a wooden house will be appropriate; moreover, this whole “pie” can be heated with the help of heated floors or the heat loss through it can be minimized using extruded polystyrene foam.
How is all this done? How to renovate a bathroom in a wooden house efficiently? By by and large, everything is done identically to buildings made of concrete or stone, but with some nuances. If the whole process is divided into stages, then we we get the following list(works are listed in their logical sequence):
- Waterproofing floors and the lower section of the bathroom walls. It is necessary to immediately make a reservation that everything regarding this point is carried out simultaneously - as a result, we get a solid “bowl” or “trough” of polymerized mastic. Here for protection wooden floor A bitumen primer should be used, which is then covered with PVC or another waterproofing membrane.
- Screed. After the preparation has been carried out, it is poured in the standard way - if desired, insulation is laid underneath, and a reinforcing mesh or frame made of wire reinforcement is placed on top.
- Laying floor tiles. This process is performed after finishing the walls in the bathroom in a wooden house.
As you can see for yourself, during the repair wooden house there are not as many difficulties as expected, but without observing these nuances, the operation of the premises will present a lot of unpleasant surprises.
Decorating bathroom walls in a wooden house
An important role in decorating a bathroom in a wooden house is played by the selection of appropriate materials for the walls. Most often used for these elements combined finishing– the main area is decorated using natural materials, and those places where there is a high risk of water splashing on the walls are tiled. In particular, the corner of a shower stall or bathtub can be sewn up plasterboard sheets and stand out with backlighting for expressiveness. The same solutions can be applied to the washbasin/sink.
Moreover, over the years of existence have shown their effectiveness:
- wall PVC panels;
- MDF panels;
- block house;
- decorative plasters.
When using any of these materials, care should be taken to ensure sufficient air exchange in the room - for this purpose, install forced ventilation systems.
Do you wish order finishing of a bathroom in a wooden house in Moscow? This correct solution- everyone better mind their own business! Contact the consultants of the Teplo Doma company and they will be able to tell you all about the prospects for mutually beneficial cooperation!
We employ only qualified specialists who follow the latest innovations in the repair services market and regularly improve their own skills at professional workshops and master classes. Over the 16-year history of the company, they have managed to implement hundreds of projects and received many positive responses.
Bathroom renovation 150 by 13 5 and turnkey toilet
will cost 90000
rub.
Turnkey completion time (3-4 weeks)
Bath (1.5 by 1.35 m.) and toilet (1.1 by 0.8 m), height 2.5 m.
| Types of jobs | Quantity |
|---|---|
| Dismantling work (dismantling old plumbing, tiles, doors, etc...) | |
| 44sq.m. | |
| 22sq.m. | |
| 6 points | |
| 12sq.m. | |
| Fan installation | |
| 19 sq.m. | |
| 3 sq.m. | |
| Grouting joints | 22sq.m |
| 3sq.m | |
| 2 pcs. | |
| Installation of accessories | 7pcs. |
Bathroom renovation 170 to 170 and turnkey toilet
will cost 100000
rub.
Turnkey completion time (4 weeks)
Bath (1.7 by 1.7 m) and toilet (1.2 by 0.9 m), height 2.7 m.
| Types of jobs | Quantity |
|---|---|
| Primer of walls and floors (two layers) | 58sq.m. |
| Leveling walls and floors according to beacons | 29 sq.m. |
| Installation of coarse filters, meters, fine filters, collectors (combs) for cold water and hot water supply | |
| Installation water pipes and sewerage (with recessing into the walls) | 6 points |
| Installation plumbing box in the toilet (from foam blocks) | |
| Waterproofing in the bathroom | 16sq.m. |
| Installation and connection of a cast iron bath | |
| Fan installation | |
| Electrical installation work (sockets, replacement of electrical wiring, switches, installation of lamps) | |
| Laying tiles standard sizes(not less than 20 x20cm) on the walls | 25 sq.m. |
| Laying tiles of standard sizes (not less than 20x20cm) on the floor | 4 sq.m. |
| Grouting joints | 29sq.m |
| Installation of slatted or plastic ceiling | 4sq.m |
| Installation of roller shutters or overhead hatch in a sanitary closet | |
| Installation of an overhead screen under the bathtub (MDF or PVC) | |
| Installation and connection of a bathtub, sink with cabinet, toilet, washing machine, sink faucet, bathtub faucet or installation of a shower system | |
| Installation and connection of a heated towel rail | |
| Installation of doors (without extras) | 2 pcs. |
| Installation of accessories | 7pcs. |
| Cleaning and removing trash up to the stairwell |
Renovation of a combined bathroom 150 to 185 turnkey
will cost 85000
rub.
Turnkey completion time (3 weeks)
Combined bathroom (1.5 by 1.85 m.) height 2.5 m.
| Types of jobs | Quantity |
|---|---|
| Dismantling work (dismantling old plumbing, tiles, doors, pipes, concrete protrusions, etc...) | |
| Primer of walls and floors (two layers) | 34sq.m. |
| Leveling walls and floors according to beacons | 17 sq.m. |
| Installation of coarse filters, meters, fine filters, collectors (combs) for cold water and hot water supply | |
| Installation of water pipes and sewerage (with recessing into walls) | 6 points |
| Installation of a plumbing duct in the toilet (from foam blocks) | |
| Waterproofing in the bathroom | 10 sq.m. |
| Installation and connection of a cast iron bath | |
| Fan installation | |
| Electrical installation work (sockets, replacement of electrical wiring, switches, installation of lamps) | |
| Laying tiles of standard sizes (not less than 20x20cm) on the walls | 14.5 sq.m. |
| Laying tiles of standard sizes (not less than 20x20cm) on the floor | 2.5 sq.m. |
| Grouting joints | 17sq.m |
| Installation of slatted or plastic ceiling | 2.5 sq.m |
| Installation of roller shutters or overhead hatch in a sanitary closet | |
| Installation of an overhead screen under the bathtub (MDF or PVC) | |
| Installation and connection of a bathtub, sink with cabinet, toilet, washing machine, sink faucet, bathtub faucet or shower system | |
| Installation and connection of a heated towel rail | |
| Installation of doors (without extras) | 2 pcs. |
| Installation of accessories | 7pcs. |
| Cleaning and removing trash up to the stairwell |
Turnkey renovation of a combined bathroom 170 by 220
will cost 90000
rub.
Bathroom renovation including demolition of the plumbing cabin and improvement of the layout
(extension into the hallway or kitchen)
will cost from 110000
rub.
Renovation of a bathroom and toilet in a Stalinist house
will cost from 110000
rub.
Additional work that may affect the total cost
| Types of jobs | Surcharge |
| Demolition of the aceid sanitary cabin (walls and ceiling) and construction of new walls | +20000 rub. |
| Demolition of the plaster cabin (walls and ceiling) and construction of new walls | +25000 rub |
| Moving a doorway | +3000 rub. |
| Instead of a standard toilet, installation wall hung toilet with installation | +5000 rub. |
| Installation of a hygienic shower | +4500 rub. |
| Installation of a shower - tropical shower from the ceiling or from the wall | +7000 rub. |
| Installing a hot tub | +5000 rub. |
| Installing a shelf inside the wall | +7000 rub. |
| Installation of the podium | +3000 rub. |
| Installation of an invisible hatch and tiling | +2000-6000 rub. |
| Water heater installation | +4000 rub. |
| Installation and connection of heated floors | +6000-8000 rub. |
| Installation of extensions on one door | +1000 rub. |
It is important for us that you know the exact cost of our services before renovating your bathroom and toilet.
There will be no extra charges during the repair or upon completion of the work.
And you can also order partial renovation bathroom:
Complete replacement of water supply and sewerage 25000 rub. - 35000 rub.
Partial replacement of water supply and sewerage (1t.) - 4500 rub.
The desire to create comfort and convenience in a home, apartment, cottage, to save space in the bathroom or to expand the capabilities of this room leads to the decision to buy a shower stall.
Installing shower cabins is a task that requires a professional solution. The Remzak company will provide high-quality services to ensure that the shower box works for a long time and properly.
Order plumbing work to install a shower cabin, and Remzak specialists:
- They will help you choose a model based on your wishes and features of engineering systems;
- They will carry out preparatory work: dismantling old equipment, supplying water supply and drainage to the installation site, connecting to the electrical network;
- The cabin will be assembled and installed;
- They will connect and check operation in all modes.
- They will issue a guarantee for the installation.
Call a specialist
Attempt self-installation shower box will lead to unpleasant consequences: flooding of neighbors, failure of cabin systems, discrepancy between operating modes and passport parameters. It is worth paying attention to the danger of injury electric shock, if the connection to the network is made by a non-specialist.
Contact the Remzak company, installation of shower cabins in Moscow is our specialization. We guarantee high quality performance and long service life of this modern plumbing equipment.
Our services
Shower cabin is sanitary product, intended for taking a shower. It is a space limited by a protective structure. Structurally, it consists of a pallet and a cabin that is completely closed or open at the top. This ensures a comfortable shower without splashing water. 
Installing a shower cabin allows you to save space compared to installing a classic bath. We install:
- Classic shower cabins without additional options;
- Showers with hydromassage;
- Shower cabins with steam generator and function Turkish bath, To additional functions can be attributed to the presence of the function “ tropical rain", normal and relaxing lighting, FM radio or MP3 player.
Order installation of shower cabins of any type, size and shape. We work with products from leading manufacturers of plumbing equipment, including the following products:
- Chinese brands: MIDOCEAN, APOLLO, EAGO, FRESH, ATTOLL, AUMEIA, NIAGARA, LEMEN, VINTORIO, RIVER, GOLDEN FISH, NAUTICO, AQUALUX, AMMARI, BORNEO, VELA, LIEDER, AVANTA, COLISEUM, VICTORIA, ERLIT, AQUA, SEAN, GOLF, JOY, H.X.;
- Russian companies: AQUARELLE, RADOMIR, AQUAVITA, AQUANET;
- Made in Italy: ALBATROS, DOCTOR JET, TEUCO, GLASS, JACUZZI;
- German companies: HUBER, SERENA, AM PM;
- Finnish models: TIMO, IDO;
- Czech brands: LUXUS, RAVAK;
- Swedish made: EKA, IFO.
Our services for installation and connection of shower cabins and boxes include:
- Preparatory work in the bathroom: dismantling old plumbing, waterproofing equipment;
- Supply of engineering systems to the installation site (water, drainage, electrical network);
- Assembly, installation and connection of the cabin;
- Sealing of all connections, seams, joints;
- Checking the system in all operating modes;
- Handing over the work to the client with a guarantee.
The Remzak company will provide turnkey installation of shower cabins, including subsequent repairs and finishing of the bathroom.
Cost of installing a shower cabin
The total cost of work on equipping a shower box depends on many factors and is calculated by a specialist. When installing a shower stall, the price for the work depends on:
- Cabin size and type;
- The need to bring communications to the installation site;
- Cab functionality;
- Features of the room where the installation is carried out.
Price for installing shower cabins in Moscow:
| Type of work | Cost, rub.) |
| Installation of a simple cabin with electrical supply | from 2500 |
| Installation of a simple cabin without electrics, without rear walls | from 2245 |
| Installation of a square-sized cabin without electrical supply + rear stacks + pressurization | 3560 |
| Cabin installation square section 80*80, 90*90, 100*100 with electrical supply | from 3800 |
| Cabin installation with rectangular cross-section 120*85,135*85, 150*85 | negotiable |
| Installation of a multifunctional shower cabin (steam generator, hydromassage) | 4400-5900 |
| Installation of a multifunctional shower cabin with Turkish bath and sauna functions | from 4600 |
| Assembly + installation of a shower cabin with a jacuzzi | from 8000 |
| Modernization of communications for connecting the cabin (drainage, water, electrical) | negotiable |
| Installation of plastic curtains | 990 |
| Installation of glass curtains | 1390 |
| Installation of a shower column | negotiable |
| Installing a simple hydromassage column | 2000 |
| Installation of hydromassage column + electrical equipment | 3500 |
| Fixing a leak in a shower stall | from 1000 - 1600 |
| Installing a podium under a shower stall | 2200 |
| Replacing the shower diffuser | 100 |
| Installation of a shower panel with hydromassage nozzles | 2000 |
| Installation of an acrylic tray on the floor + connection to the sewer | 1950 |
| Dismantling the shower cabin (depending on the size, type and the need for subsequent use of the removed equipment) | 700-1900 |
| Calculation of work (free of charge when work is ordered from us) | for free |
| Selection of equipment by our specialist, inspection upon purchase (in an hour) | 250 |
Note: the cost of work does not include additional materials.
Shower cabin assembly
Assembling a shower cabin is a critical stage on which the quality of its operation, the absence of leaks and compliance with the passport parameters of all operating modes depend. 
This stage of work includes:
- Pallet installation;
- Installation of walls and movable curtains;
- Installation of a shower column;
- Installation of the control panel;
- Connecting the internal components of the box.
Remzak craftsmen will assemble the shower cabin efficiently and quickly, regardless of the manufacturer, type and functionality.
Connecting a shower cabin
After preparatory work and assembly of the shower cabin, the connection is made in compliance with technology and safety rules. At this stage, Remzak employees connect:
- sump siphon to the sewer drain;
- cold and hot water to the appropriate entry points of the shower box;
- power supply to the cabin, if necessary.
After completing the work, the tightness of the connections and the absence of leaks, as well as the quality of the insulation, are carefully checked.
How to order installation of a shower cabin
Do you need to equip your house, apartment or cottage with modern equipment such as a shower? Order installation from our company. You can do this in several ways:
We will immediately contact you to clarify the details, agree on the time and list of necessary services, and come to you to assess the scope of work and their cost. After receiving consent, our specialists will begin work. A few days after contacting us (the period depends on the volume and complexity of the work), you will be able to experience all the benefits and comfort of using a modern shower cabin.
If you have an old wooden house on your property, do not rush to demolish it. Old buildings can still serve long years after restoration. It is necessary to return the house to its former attractive appearance, “overcome” the fungus, install thermal insulation and you can live!
Not many companies take on the restoration of old wooden houses. At Dom and Co. we carry out major and cosmetic repairs of varying complexity, with possible additions upper floors and attics, replacing crowns, adding terraces, etc.
Problem assessment
You have become the owner of a neglected old house or have decided to carry out restoration work on your dacha. Would you like to estimate the amount that restoration will cost? Contact Dom & Co! Our expert will inspect the building and evaluate the foundation, roof and frame for cracks, rotted or fungus-damaged elements. The specialist will outline the range of problems and indicate approximate cost repair. If starting it is pointless, and it is better to prepare for the construction of a new house, we will also honestly tell you about it.
Redecorating
The top layer of wood loses its attractive appearance after several years of use. This occurs due to exposure to the sun, moisture and microorganisms. The wood turns gray, blue, and peels. If black spots appear on it, this indicates the spread of fungus. To restore your home to its former attractiveness, you need mechanical grinding, and then processing the cleaned surface. Sanding is recommended every five years. Sometimes you can do without a grinder and clean biological lesions with antiseptics. But grinding and subsequent processing is a radical and best way.
Sealing cracks
Cracks in logs and beams should be repaired using putty. In some cases, it is necessary to caulk the joints of the log house elements. Both putty and caulking are done before cosmetic operations to put the log house in order. These important renovation work must be produced correctly. Then they will have an effect: insulating the house and stopping its further aging. Do not do the caulking yourself, but entrust it to the Dom & Co. repair team.
Protective treatment
All sanded wooden surfaces must be treated protective compounds from bacteria, insects and fungi. We use modern complex antiseptic treatment products, including insecticides and fungicides. Impregnations will increase the service life of the log house and delay as much as possible the moment when you have to start putting the house in order again.
Primer is an essential part cosmetic repairs. It is produced with outside and protects the surface from weather influences, temperature changes, etc. Special attention end protection must be provided wooden walls. The maximum amount of moisture is absorbed through them, which leads to cracking. After priming, you can varnish or paint the house. This is the final stage of cosmetic renovation of a wooden house outside.
Internal renovation work
When carrying out cosmetic restoration, it is necessary to assess the condition of the rafter system, floor, stairs, and sheathing boards. Some elements will have to be replaced. A specialist should be involved in assessing and eliminating such breakdowns. We recommend experts and repairmen from our company who have extensive experience in restoring wooden floors on joists, ceilings, rafter systems, etc.
Bleak House
Often our customers are not so concerned about appearance how bad are the thermal insulation qualities? wooden buildings. The walls and corners of old and not very old wooden houses often “breathe cold.” This happens due to insufficient wall thickness, or due to improper assembly of the log houses (insufficient insulation material or the technology for laying it is broken, gaps are left in the cups). When using the house, the problems only get worse: cracks appear, the house becomes even “colder”. To insulate such a log house, a rope seal is traditionally used. But we use elastic sealant together with polypropylene tubes (the so-called “Warm Seam” technology).
Major renovation of a wooden house
An old house requires a lot of effort to restore. The main thing is to make sure that all the costs for its restoration are worthwhile. The weakest point of wooden buildings is lower crowns installed on concrete or brick foundations. These crowns absorb moisture through concrete and brick and sometimes simply rot. As a result, the house gives a visible settlement, the plaster in the rooms falls off, and the walls become warped. To prevent this from happening, you need to do thorough waterproofing in the lower part of the log house, and also isolate the foundation itself from water. But if “the job is done” and many years have passed since then, what can be done? We offer replacement of rotten logs or beams.
First you need to prepare a log house of the same size as the existing one. The number of replaced crowns can be the same or greater. This way you will be able to “raise” the ceilings a little if desired. The best material for the lower crowns - larch. This is the most moisture-resistant wood. But in a specific case, an expert from our company will help you make a choice.
Sometimes, to replace damaged parts, the house is dismantled and reassembled. This method is used when the construction/reconstruction of a building is planned. In all other cases, it is easier and cheaper to raise the frame using channels and jacks, restore the foundation and lower crowns, and then install the upper part on a new foundation. Our company has the equipment and capabilities to jack up one- and two-story wooden buildings. This operation must be carefully prepared: furniture is taken out of the house, door and window boxes, which can collapse at the slightest distortion of the structure. Floor joists embedded in the crowns of the log house must also be dismantled. The chimney must be separated from the roof and ceiling. You should not perform such a complex operation yourself, so as not to completely destroy the house. Entrust the work of replacing crowns to the professionals from the Dom and Co. company.
After the reconstruction of the foundation and the lower part of the walls, the floor is assembled or remade, restored outer part, rafters and stairs are replaced as necessary, internal Finishing work. Attention should be paid rafter system. If you strengthen, strengthen and replace problematic elements in time, you can avoid destruction and leakage of the roof. For this purpose, unloading beams are installed (so-called “supports”), the beams are reinforced with double-sided overlays, struts, etc. Lower parts truss structures are often damaged due to roof leaks, poor vapor barrier, etc. All these damages need to be identified and repaired.
Where to order restoration work on an old wooden house
Reconstruction or repair of an old house in Moscow or the region will be carried out for you in construction company"Dom and Co." This specific and hard work carried out by teams of craftsmen with extensive experience both in the construction of wooden buildings from scratch and in repairs.
Work order
- Examination. Departure of Dom & Co specialists to the site for registration and examination of the house.
- Coordination of the estimate. Selection and preparation of materials. Production of new crowns, Purchase finishing materials, impregnations, rafters, floorboards and other things. Procurement of materials for a new foundation.
- Carrying out restoration. Carrying out work on the site according to a pre-approved plan.
- Handing over the repaired facility and instructing the client on operating rules.
