What does a men's khaki jacket go with? What to wear with a green jacket: fashionable looks of the season. Bronze khaki, combination with other colors

To learn how to quickly and efficiently iron clothes and bed dress, many housewives spend a lot of time on this. All the intricacies of this process and additional ironing tips are outlined below in the article.

Preparing for ironing

It is easier to iron the sets while they are slightly damp. If this cannot be done after washing, the dried bed linen should be folded:

First of all, all bends and folds are straightened out.
The sheet is folded in half lengthwise, with all the corners connected. If you need to iron on a special board, you need to bend the set along the length a second time, and then fold it across the width. Before each folding, the fabric must be ironed. On sheets with corners, you need to fold them in the middle. After this, the rectangle is folded like an ordinary sheet.
The corners of the duvet cover are straightened, then it is fastened and folded according to the same principle as a sheet.
The pillowcases are well aligned and laid out on the board without bending.

A stack of folded items must be laid out on a hard surface and pressed down with something heavy. Before ironing, bedding should be sprayed with water. After ironing is completed, it will be clear why this is being done.

Every housewife finds the most suitable and most convenient way how to quickly iron bed linen. To make the work more convenient in the future, all components of the kit will have to be folded sequentially, as mentioned above, to the desired size.

To iron dark fabric, you need to lay it out so that the iron is in contact only with the wrong side.

The main thing to remember is that it is unacceptable to iron dirty bed linen. After this, the set can no longer be washed, since fragments of dirt are well absorbed into the fibers during heat treatment. In addition, an environment is formed in which pathogenic bacteria quickly multiply.

For various types fabrics have their own ironing temperature. For example, cotton requires the soleplate of the iron to be heated to 200 degrees, while jacquard can only withstand 120.

Fast ironing with steam generator

Owners of a steam generator will be able to save time and effort. The bed linen is straightened in an accelerated mode, thanks to the power of the steam, and the process itself will take a little time.

Advantages and disadvantages of ironing

Let's look at the main advantages of ironing:

Most housewives want to know how to properly iron bed linen. ironing board to eliminate various larvae, bacteria or dust mites that are not resistant to high temperature;
Such sets save space on shelves and make it possible to use the filling of the cabinet;
The wear resistance of bed linen increases after heat treatment. The fibers are structured and become stronger during further use of the set;
Ironed fabric is soft and causes a pleasant tactile sensation;
When ironing is performed, the bed linen becomes more beautiful.

How are they expressed? negative sides ironing bed linen:

Some fabrics become slightly electrified after ironing, which can cause discomfort;
The hygroscopicity of the fabric is disrupted. If you iron bedding, it will absorb moisture less well;
Ironing clothes takes time and effort;
High temperature helps eliminate the pleasant smell from the air conditioner.

Using the air conditioner

By adding conditioner before each wash, your bedding will be protected from unnecessary friction that can cause the surface of the fabric to warp. There are many different air conditioner scents available in the market from which every homeowner can choose the right scent for themselves.

You should try to take out the clothes after washing as soon as this process is completed. Bed linen should be shaken and hung on the dryer without any wrinkles. The fabric will not be as wrinkled, so ironing will require less effort.

Additional tips to make ironing easier:

Before ironing, the surface of the iron must be wiped damp cloth. This is necessary to ensure that the heated sole is clean and optimal temperature regime;
You need to provide yourself with a comfortable environment. To do this, you can try to iron in a free room;
It is advisable that there is a lot of light in the room;
While ironing, it is always convenient to watch TV or listen to a radio program;
If you shake your clothes before ironing, it will be much easier to use the iron;
It is unacceptable to overdry things; it is advisable that the fabric remains moisturized. This will allow you to smooth out wrinkles better and prevent the fabric from being damaged.

What will happen to bed linen after using conditioner?

The fabric will become softer;
Static electricity will not accumulate on synthetics or wool;
The fabric will look almost like new;
The fibers will wear out significantly less;
Ironing such bed linen will be much easier.

What fabric does not need to be ironed?

Let's look at which bed linen should not be ironed:

Silk is a natural material that perfectly absorbs moisture and all kinds of fumes that can be released on the body during sleep. Natural silk almost does not wrinkle and does not require special care;
Calico bed linen can last about 10 years. Due to their properties, the sets do not need to be ironed. Sometimes it is enough to properly dry the sheet and duvet cover so that there are no kinks or dents in the fabric;
Satin jacquard. Such bedding has a tactile feel similar to silk and is a worthy alternative. Thanks to its weave, the material is very durable and does not require ironing.

It is recommended to iron cotton bed linen on the right side. It is advisable to process silk from the inside out without using water, which will cause streaks. It is highly undesirable to iron dried sets. You need to do the same with satin. Synthetics, on the contrary, are ironed dry with the obligatory use of gauze.

Terry sets should be laid out on a horizontal plane, carefully leveled and left to dry. They do not require any heat treatment with an iron.

Fabrics with embroidery should only be ironed from the inside out. First of all, the embroidered area is processed and a soft material, after that it is turned inside out and ironed according to the usual pattern.

It is necessary that the soleplate of the iron is always clean so that dirt does not get onto the bed linen. For this purpose, you should always keep cotton napkins at hand. If dirt forms, you can use a special cleaner or baking soda.

To prevent the fabric from stretching, it must be ironed along the longitudinal grain. After ironing, the temperature of the bed linen should decrease to room temperature. Only after this can you begin to put clean, even sets in the closet.

After reading the information presented in this article, no one will have any questions about how to iron bed linen correctly on an ironing board.

Traditionally, it was believed that a good bed should be snow-white, starched and ironed. However, ironing even one sleeping set is a rather labor-intensive task. Therefore, recently, many housewives prefer fabrics that do not require ironing, and claim that they don’t have to iron their bed linen. Is it so?

Do you need an iron?

Answers to the question “should you iron bed linen and why” can be divided into two categories:

Opponents of this procedure argue that ironing bedding is not only unnecessary, but even harmful, since under constant exposure to high temperature and pressure, fabric fibers lose their hygroscopicity and wear out faster. Proponents of this point of view, instead of ironing the bed linen, carefully fold it while still damp and allow it to dry.
At the same time, if you ask a doctor “why iron your bed linen,” the answer will be clear: with this procedure you can be guaranteed to get rid of harmful microorganisms. After each wash, sheets, pillowcases, duvet covers, and pajamas should be ironed at the appropriate temperature. This bed is pleasant to the touch, smells good and promotes healthy sleep. If, instead of ironing, the bed linen is folded wet, unwanted microflora will form on its surface.

Thus, the answer to the question whether it is necessary to iron bed linen after washing does not require an explanation of “why?” This is especially necessary for those who care about their health or live in a damp, cool climate. You just need to think about how to do it correctly, quickly and, if possible, not tiresomely.

Getting ready for ironing

It's easiest to iron sleeping sets while they're still slightly damp.. If you do not have time to do this immediately after washing, the dried items should be folded carefully. This is done this way:

First, straighten out all the folds and bends.
The sheet is folded in half lengthwise, carefully aligning the corners and sides, then (if ironing will be done on an ironing board) folded along the length again, after which it needs to be folded widthwise once or twice. If the sheet has “corners,” you need to fold them inward, then bend the resulting rectangle like a regular sheet.
Carefully straighten all the corners of the duvet cover, fasten it (if there is a fastener) and fold it in the same way as a sheet.
The pillowcases are carefully aligned and, if possible, not bent.

A stack of folded items should be placed on a flat, hard surface and pressed down on top with a press. Before ironing bedding, spray it with water from a spray bottle and allow it to soak in moisture. The answer to the question of why and how this is done will be obvious after ironing is completed.

Features of the iron

To properly and quickly iron your sleeping set, you should prepare everything in advance. It is more convenient to iron large items on the table. You can do this on an ironing board, but in this case it is better to put a clean mat on the floor so that the laundry hanging from the board does not get dirty. The iron must have a steamer and appropriate temperature settings.

Ideally, it is better to process each item unfolded, but even on a table this is difficult to do. Therefore, bedding, with the exception of pillowcases, is ironed folded so that its size corresponds to the ironing surface, usually four times. It is recommended to move the iron along the grain thread. After ironing one surface, the folded duvet cover or sheet is turned over and smoothed on the other side. After this, the product is unfolded and folded with the unironed sides up, carefully aligning the fold lines. If you are ironing a sheet with corners, then first of all you need to iron its sides, then roll them inward, fold the resulting rectangle in four and process it on all sides.

The ironed items are placed in piles of a size convenient for placement in the closet and left to rest for several hours. Make a freshly ironed bed only if absolutely necessary.

Do you need an iron?

Answers to the question “should you iron bed linen and why” can be divided into two categories:

Opponents of this procedure argue that ironing bedding is not only unnecessary, but even harmful, since under constant exposure to high temperature and pressure, fabric fibers lose their hygroscopicity and wear out faster. Proponents of this point of view, instead of ironing the bed linen, carefully fold it while still damp and allow it to dry.
At the same time, if you ask a doctor “why iron your bed linen,” the answer will be clear: with this procedure you can be guaranteed to get rid of harmful microorganisms. After each wash, sheets, pillowcases, duvet covers, and pajamas should be ironed at the appropriate temperature. This bed is pleasant to the touch, smells good and promotes healthy sleep. If, instead of ironing, the bed linen is folded wet, unwanted microflora will form on its surface.

Getting ready for ironing

First, straighten out all the folds and bends.
The sheet is folded in half lengthwise, carefully aligning the corners and sides, then (if ironing will be done on an ironing board) folded along the length again, after which it needs to be folded widthwise once or twice. If the sheet has “corners,” you need to fold them inward, then bend the resulting rectangle like a regular sheet.
Carefully straighten all the corners of the duvet cover, fasten it (if there is a fastener) and fold it in the same way as a sheet.
The pillowcases are carefully aligned and, if possible, not bent.

Features of the iron

The ironed items are placed in piles of a size convenient for placement in the closet and left to rest for several hours. Make a freshly ironed bed only if absolutely necessary.

Face or back?

Most fabrics are ironed right side out, so bedding is folded inside out before ironing. If the products have embroidery, it is ironed from the inside out on a soft bedding, after which the duvet cover or pillowcase is turned out and smoothed from the front side, bypassing the embroidered areas. On dark fabrics, the iron can leave noticeable marks, so it is best to fold such items with the wrong side up. You can fold them in the same way for storage.

It is better to process silk products immediately after washing, without drying them slightly. They will be ironed on minimum temperature and only from the wrong side. It must be remembered that water can leave unsightly stains on silk, so it should not be sprayed. When folding such items before ironing, it is better to cover them with a damp cloth.

Ironing bed linen is an integral job of every good housewife, who carefully and carefully looks after the set of bedding, keeping them neat and tidy.

How to iron a sheet with an elastic band? This will be discussed below.

Why iron bed linen?

Ironing bedding sets is necessary for a number of reasons:

High-quality heat treatment of linen disinfects the fabric.
At correct execution ironing, the sleeping set will remain neat and tidy for much longer
Heat treatment eliminates deformation of linen.
Ironing improves the tactile properties of the material, making it softer
Well-ironed and neatly folded bed linen is much easier to compactly place in a chest of drawers or closet.
Ironing is recommended for people with allergic skin reactions, skin and infectious diseases.

Sheets with elastic

This the new kind the sheets have a number of features that, without a doubt, every housewife will appreciate:

since soft material is used for sewing, the sheet with elastic does not wear out for a long time;
it is easy to wash and dry;
it can be used instead of a mattress cover if one is missing;
during a night's rest, the sheet with an elastic band does not slide to the floor and crumples;
can be used for a children's bed, as it holds its shape well, even if the baby moves and spins vigorously;
This product has a neat, attractive and aesthetic appearance.

Such bed linen can be selected directly to the size of the mattress. For example, you can buy a sheet with an elastic band 160x200 cm or euro - 200x220 cm. Products are usually made from natural fabrics such as cotton, linen, calico or satin. They are soft, strong and durable. In addition, the products retain their color and appearance for a long time. How to iron and fold a sheet with an elastic band? Let's look at this later in the article.

Preparing bed linen for ironing

In order to properly iron your bed linen, you should listen to some tips.

The ironing area must be well lit. If there is a special board, great, but if it is missing, it’s also not a problem. You can simply cover the table with a thick, heavy cloth that will not slip when ironing. If an ironing board is used, its height must be adjusted to suit personal growth so that you don’t have to bend while ironing, otherwise you can get tired quickly.

There are many more important nuances on the topic “how to iron a sheet with an elastic band”:

An iron with a sprayer is good. But sometimes, to moisten the laundry during ironing, it is much better to use a spray bottle and place gauze on top of the item.
After washing, it is best not to dry the laundry a little and iron it slightly damp - then spraying may not be necessary at all.
You need to be careful where you place the iron when adjusting or turning the fabric. Remember, under no circumstances should it be placed horizontally on the product, as it may stick to the base of the device or burn.
It is also important to ensure that no water comes into contact with the iron, as this may cause a short circuit.
Before running the iron over the next bed linen, you need to iron it with your hand, thus checking for the presence of folds and creases in the fabric, which will then be quite difficult or even impossible to remove.
You should not iron the same areas of the product several times. If you see that everything is already smooth, it means enough. Ironing is finished.

These are small, but practical and very useful tips will help you iron your bed linen in a matter of minutes. And at the same time do all the work just perfectly.

How to iron a sheet with an elastic band correctly?

So, if you bought yourself such a sheet, washed it, but encountered problems with ironing? Some housewives complain that ironing it is completely inconvenient; it does not fit on the ironing board and cannot be ironed. But in reality, not everything is as sad as it seems at first glance! The most persistent and creative housewives have developed different ways ironing this bed linen. Let's look at the main ones.

Method one is the easiest

It is considered the simplest. Ironing a sheet with an elastic band is carried out as follows. The product is folded in half, then in half again, and then ironed. When folding it in four, you need to make sure that folds and creases do not form on it. Because it will be difficult to smooth them back out after this. Some experts recommend ironing bed linen this way only with an elastic band in the corners.

The second method is the most painstaking

This method of ironing a sheet with an elastic band is the most painstaking. You need to start ironing from the center, gradually turning the fabric itself, moving in a circle. This option is quite time-consuming, but it allows you to iron and heat treat the entire surface efficiently, without creases or folds.

Original method No. 3

It is considered the most original. With its help you can give the material a smooth and perfectly flat surface. Let's look at how to iron a sheet with an elastic band step by step:

first, only the middle of the sheet is ironed;
then iron, starting from one side of the sheet, moving gradually along the perimeter of the product;
After the sheet has cooled, it is put on the mattress and the result obtained is evaluated.

If the linen fits tightly to the mattress, then even small creases will be invisible.

Fourth method

Before ironing a sheet with an elastic band, pull it over the mattress and iron it without special effort, moving from the center. This method allows you to completely avoid the appearance of folds and creases and carry out complete heat treatment of the product.

So, we looked at how to iron a sheet with an elastic band. It is up to the housewife to decide which method to choose, but you need to remember that the ironing temperature must be set depending on the characteristics of the fabric from which the product is made.

Many people even refuse to iron bed linen, since when they are pulled onto the mattress they are already straightened and smoothed out well, but in this case there is no thermal treatment of the fabric, and, accordingly, no disinfection.

Folding fitted sheets

You should not put such sheets in the closet immediately after ironing. It is better to let them cool slightly to room temperature.

So, after the fitted sheet has been ironed, the question will arise: “How to fold it?” Let's look at this process step by step.

Turn the fitted sheet inside out and carefully insert your hands inside, straightening the bottom and top corners with your fingers.
We move the corner from one hand to the one that is in the second hand so that in one hand we get two corners, as if put on one another.
We push through free hand back and find another corner located below.
In the same way we add it to the two previous ones, then the fourth and last corner. So, the four corners turned out to be inserted into each other.
We carefully straighten the resulting rectangle and spread it on a flat surface.
If there are two sides with an elastic band next to each other, then everything is done correctly.
Now you can fold the sheet several times, like regular underwear. The result is the following appearance: the edges are tucked into each other, and the product itself is folded evenly.

At first glance, the process of folding this laundry looks quite labor-intensive and complicated, but in reality everything is much simpler. The first time you may have to tinker a little, figuring out this folding technique, but next time this work will take about five minutes, no more. In this type of sheets it is convenient to store on a shelf in the closet; they take up minimal space and do not wrinkle.