Good afternoon, dear subscribers construction portal- website. With this lesson we continue step by step guides aimed at improving the dacha plot, as well as its design. Today we will look at how to make an ottoman out of tires with your own hands.
Tools needed to create an ottoman
Step-by-step instruction
- First of all, we cut a sheet of our plywood based on the contour of our tire and make a sheet round shape, after that we drill holes in the tire and plywood to secure and connect the tire and plywood.
- Next, use self-tapping screws or bolts, but keep in mind that when fastening elements with bolts, you will need to make holes for the bolt heads so that they do not stick out from under the plywood cover. Fastening plywood sheet to the tire.
By the way, please note that the plywood sheet is attached on both sides, because... We will attach roller legs to the bottom of our ottoman, which will move our ottoman on wheels.
- We begin to glue our twine to the tire, we need to start from the middle and lay the twine in the shape of a snail, which contributes to a rather beautiful pattern.
- You need to glue with strong glue, we recommend using glue in a special gun, but if you don’t have such a tool, then “Moment” glue will do, but note that it must be very sticky!
- Next, when the lid of our ottoman is covered with twine, we begin to glue the twine directly onto the tire itself.
- To make the rope fit better on the tire, we need to turn the tire from top to bottom, which will make it easier to attach the rope.
- Next, we cover the tires completely, and cut off the excess twine and glue it to the lid.
- Next, we glue the lid and cover our ottoman with varnish. Coating the ottoman with varnish is necessary so that the rope with which our ottoman is covered does not get wet under the influence of rain.
A tire ottoman is ready. By the way, as a decoration, you can screw legs or wheels to it, then it will become the object of adoration for your children. That's all, subscribe and join our group, DIY builders!.
Today, not only the country cottage area or Vacation home, but also a garden gazebo or even a garage. These structures can be decorated with various interior items made from scrap materials that can be found at any dacha. For example, you can make an original ottoman from a tire with your own hands. By the way, you can find car tires from any car enthusiast or at a tire repair service station. Just remember how in the past you could find a beautiful flower bed made of tires at almost every entrance. Today we will look at step-by-step master class which describes how to turn unnecessary thing into beautiful furniture.
Making an ottoman from tires for beginners
Such an item will become truly exclusive and original decoration, which can be used when arranging a gazebo or garage. You need to apply your own imagination to the work and show creative skills. If you make a pouf from a tire with your own hands, you will get a stylish and original design.
Required tools and materials:
- Old car tire.
- Twine.
- Self-tapping screws.
- Plywood.
- Glue gun.
- Drill.
Follow these steps in this order:
- Cut two circles from a sheet of plywood to the size of the tire.
- Place plywood on top and bottom of the tire. Attach it to the tire using self-tapping screws.
- With help glue gun glue the twine to the plywood. Rotate the twine in a circle, making turns sequentially, pressing them tightly together. Lay down the twine until the ends of the tire are completely covered.
Important! It is better to start gluing from the center, using the snail principle.
- Coat the glued rope with varnish to protect it from adverse effects. sun rays or weather events.
As a result, you will get a wonderful design solution.
Important! The ottoman will be beautiful and economical. You can place it in a gazebo, garage or veranda.
Original do-it-yourself ottoman made from wheels
Here's another good idea on how to make an ottoman from a wheel with your own hands. The first step is to properly prepare the tires.
Important! If you have previously used them on your car, first wash them with water using washing powder and brushes to remove remaining clay and dust.
Prepare the following materials from the list:
- Old tires from a car.
- Thick fabric or mesh.
- Foam rubber.
- Lace or fringe.
- Finishing fabric.
- Needles, strong threads.
- Self-tapping screws.
- Sewing machine.
You need to do the following:
- To make an ottoman the same height as a regular stool, place two tires on top of each other, then use electrical tape to connect them.
- By inner surface screw the tires with self-tapping screws.
Important! Check that the wheels are firmly connected to ensure a strong and secure frame.
- Measure the diameter of the wheel hole and cut a circle of the same diameter from foam rubber. Cover the sides of the frame with foam rubber to make the ottoman soft and streamlined in shape.
- Cut a rectangle out of foam rubber so that one side coincides with the height of the frame of the future product, and the second corresponds to the length of its circumference. Wrap the frame with foam rubber and secure its ends with strong thread.
- Cover the hole with foam rubber. But first, with a special mesh or durable fabric Sew up the top and bottom holes, attach foam rubber to the top.
- It is better to use high-quality upholstery furniture fabric. Cut a rectangle out of it so that its short side matches the height of the walls of the future ottoman plus 10 cm on each side of the turn. The long side should be equal to the outer diameter of the tire plus a stitch of 1 cm. Sew the two short sides of the upholstery and pull it over the wheels on top.
Important! It's better to do it on sewing machine double seam.
- Now you need to finish and fasten the upper and lower parts of the product together. Using a strong thread and needle, fasten the structure along inside. Thread the thread from the top edge, then pull it inside, pull it out from the bottom edge.
- After complete covering, place a soft pad on top. Decorate it with applique, fringe, lace or embroidery.
In the process of decorating the ottoman, use available materials, your creative possibilities and fantasy.
Leather ottoman for the cottage
If you are a lover of unusual and original things, then try making a leather ottoman from tires with your own hands. The master class given in this section will help you realize your dream of truly decorating your home or summer cottage.
You will need the following materials:
- Three car tires.
- Foam rubber.
- Epoxy resin.
- Natural or synthetic leather.
- Plywood or the lid of a large paint bucket.
- Powerful stapler.
Make an unusual ottoman according to these instructions:
- Wash your tires thoroughly to remove accumulated dirt. At the very high point Apply glue where they will touch.
- Place the tires on top of each other. You can adjust the height yourself. Wait a day for the glue to dry completely.
- Measure the diameter and height of the tire. Add 2-3 cm to the resulting numbers for the seams. Cut out a rectangle from the leather. Then cut a circle slightly smaller than the diameter of the tire for the bottom cover. Wrap the rectangle of the tire, wrong side up.
- Secure the pipe shape with pins to make it a little tight. Carefully remove the pipe and stitch it. Fold the piece in half widthwise and make marks to divide the pipe into 4 equal parts. Fold the circle in half, make marks again to divide it into 4 parts. At the marks, connect the circle and the pipe.
- Distribute the fabric evenly, fasten the parts with pins, and sew a circle to the pipe. Turn out the resulting cylinder and put it on the tires.
Important! Stretch the fabric tightly and attach it to the rubber with a stapler.
The news portal “site” decided to devote this article to interior decoration. We bring to your attention a stylish and fashionable piece of furniture – a tire ottoman. Such a beautiful and convenient item home furniture You can easily do it yourself! Yes, yes, just imagine, you don’t have to buy such beauty in stores designer furniture and pay incredibly large sums of money.
A ready-made ottoman made from a tire, made with your own hands, will look great in a country house, on the veranda, in the garden, in the gazebo, in a city apartment, and even in a cafe or restaurant.
Well, now, let's figure out what materials you will need:
— old tire;
- thin rope or thick rope;
— hot glue gun;
- a piece of plywood;
- bright furniture fabric;
— synthetic winterizer or foam rubber;
- furniture stapler;
- scissors;
- four large buttons.
Manufacturing:
The tire must be thoroughly washed and dried. Then wrap it with a thin rope or thick rope, fixing it with glue.
Then cut a circle from a piece of plywood, the diameter of which will be slightly larger than the diameter of the hole in the tire. Place the cut plywood in the center of the tire, securing it with glue. This will be the bottom of the ottoman.
Now we cut out another circle from another sheet of plywood. We glue foam rubber to it, and then wrap it in beautiful furniture fabric, which we fasten using furniture stapler. This will be the seat of the ottoman.
We decorate the ottoman with four large buttons.
A detailed master class on making an ottoman from a tire can be seen in this video.
A do-it-yourself tire ottoman for the hallway is an interesting and useful craft. Choosing the right one color scheme and decor, you can quickly and without special costs decorate the apartment.
Tools and materials
A stylish, simple and comfortable pouf is made from tires wrapped in thick textured rope. The manufacturing process is simple, and by varying the shades, you can achieve a wide variety of styles.
To work you will need:
- old car tires;
- plywood;
- rope or hemp rope;
- self-tapping screws;
- pencil;
- roulette;
- hacksaw;
- screwdriver;
- glue gun;
- furniture varnish.
To make the ottoman taller, use two or three tires.
Manufacturing instructions
The process of making an ottoman is simple, even a beginner can handle it:
- Lay the tire on the floor and measure its diameter. Make markings on a sheet of plywood and cut out 2 identical circles.
- Place a circle on the tire and attach it with self-tapping screws, screwing them along the edge. Turn the product over and secure the second circle in the same way.
- Glue the end of a rope or thin rope to the bottom plywood circle with a gun.
- Start wrapping the blank for the ottoman. The coils are laid tightly, but without overlap, in a spiral, from bottom to top. Each row is secured with a few drops of glue.
- After finishing the work, cover the pouf with a layer of furniture varnish - this will protect the product from moisture and dirt.
- If desired, the pouf can be placed on legs. Finished parts fastened at the bottom with self-tapping screws or liquid nails.
The ottoman can be made with a removable top, then you can put some things inside.
Decor ideas
The appearance of the pouf depends on the design of the hallway and the entire apartment. For example, for a room decorated in eco-style, ottomans wrapped with hemp rope or twine in beige or grayish colors are suitable. Those who prefer a brighter color scheme should paint the pouf with a quick-drying acrylic paint or use tinted ropes. Dark hallway Refresh shades of turquoise, strawberry, lemon. Burgundy, purple, emerald green and deep blue poufs look stylish.
From car tires you can make a soft pouf by putting a fabric cover on a rubber base and placing it in the hole round pillow. Such a product should be decorated with a frill or fringe; it will fit perfectly into a romantic or classic interior. It is better to use plain, dense fabrics with an interesting texture: tapestry, plush, velor, faux velvet or synthetic fur.
Homemade poufs made from tires are not only attractive, but also quite comfortable. Using this technique you can also make funny tables that will be useful on the veranda, balcony and even in the living room.
Not only a country house and a summer cottage, but also a garage or a garden gazebo needs arrangement and decoration. Decorate garden gazebo possible with various interior items. It's fun to decorate your garage with items you make yourself.
Necessary tools for creating a tire ottoman: Drill, plywood, glue and varnish, scissors, brush, rope.
These items will become truly original and exclusive solutions for arranging a garage or gazebo. You can use all your imagination and imagination to create them. creative ideas. One of these items can be an ottoman made from a tire. You can make it yourself, then the design will turn out original and stylish. Below are 2 methods self-made of this product.
Materials and tools:
- used car tire;
- twine;
- plywood;
- self-tapping screws;
- glue gun;
Return to contents
Step-by-step execution of work
How to do it? A used car tire can be used to make this item. You need to take twine, any other type of rope or small rope. It is necessary to cut 2 circles from plywood according to the size of the tire.
Then place plywood on top and bottom of the tire surface. Then secure the plywood sheets to the tire using self-tapping screws. Next, using a glue gun, glue the twine to the sheet of plywood.
In this case, the work must be done sequentially, pressing each turn against the turn and rotating in a circle, starting from the center, using the snail principle.
In the same way, they continue to lay the twine further, gradually moving to the end of the tire and gluing it until the entire tire is covered.
To make an ottoman, it is best to use hemp rope. It looks attractive, is not afraid of the sun, and is environmentally friendly. After gluing to the tire, you can coat the rope with varnish.
This will protect the ottoman from moisture and adverse weather influences. This way you can get a great design solution. The design of the ottoman is beautiful and economical. The ottoman can be placed in the garage, gazebo or veranda.
Return to contents
Second manufacturing method
It is not necessary to cover the outside of the ottoman - just place an old pillow inside.
Materials and tools:
- used car tires;
- foam;
- dense fabric or mesh;
- finishing fabric;
- fringe, lace;
- strong threads, needles;
- sewing machine;
- self-tapping screws
We make an ottoman with our own hands. First you need to prepare the tires. If the tires were previously used for a car, you must first wash them with water and remove any remaining dust and clay using a brush and washing powder.
Nadi make an ottoman that has the height of a regular stool. To do this, you need to put 2 tires (one on top of the other) and connect them using electrical tape.
You can screw the tires to one another using self-tapping screws along their inner surface. The wheels must be firmly connected to each other, thus creating a fairly strong frame for the product.
We perform a seat. It is necessary to measure the diameter of the tire hole and cut a circle of the same diameter from foam rubber. The sides of the frame of the future product must be lined with foam rubber, then the ottoman will become soft and have a streamlined shape.
To do this, you need to cut a rectangle out of foam rubber. One side of the rectangle is equal to the height of the product frame, the second side is equal to the circumference of the frame. You need to wrap the frame with foam rubber and sew its ends with strong thread.
Then cover the hole with foam rubber. To do this, you first need to sew up the upper and lower holes with a strong fabric or a special mesh, then attach the foam rubber on top of it.
The final stage is creating the upholstery. For this, it is better to use thick furniture fabric. Cut a rectangle from this fabric. Its short side is equal to the height of the ottoman walls plus a turning width of 10 cm on each side.
The long side of the ottoman is equal to the outer diameter of the wheel plus one cm per line. Sew the 2 short sides of the fabric upholstery and stretch it over the wheels. The stitching is best done on a sewing machine. It is better to make a double seam.
The frame of the product is covered with fabric. Now you need to finish and fasten the upper and lower parts of the model together. Using strong thread and a needle, we fasten the structure along the inside of the wheels. To do this, thread the thread from the top edge, then pull it inside and pull it out from the bottom edge.
The fabric is stretched. After complete stitching, you can put a soft pad on top. The decoration can be complemented with fringe, applique, embroidery, and lace. When creating a model design, use all your imagination and creativity.
