Stone cladding panels. Stone-look facade panels. Installation procedure and necessary tools

Original finish The facade of the house with stone-look panels, the photo of which you see on this page, allows you to get a decorative and respectable facade at the lowest cost. In addition, this particular finishing option is distinguished by its minimal weight, which cannot be compared with the weight of a façade made of natural stone.

If you are considering decorating the facade of your house with stone panels as an option, the photos will help you solve 3 problems:

First, choose which texture option. Will it be a wild stone or will it be granite paving stones.
Next, you can choose the material of the panels that you will use based on the options. Some panels are made from metal, others from plastic.
Having chosen the panel material, you can begin searching for a panel manufacturer that is represented in your city.

Thus, if you plan to decorate the facade of the house with stone panels, photos of options play an important role at the planning stage, allowing you to save cash and saving you from purchasing trial samples.

Which panels to choose - plastic or metal

The choice of plastic or is, as they say, a matter of taste, as well as the influence of specific local conditions.

For example, modern manufacturers facade panels offer more color and texture options in plastic. But metal panels are more durable.

It turns out that if your house is located on a relatively large fenced area and it is important for you to give it more decorative look, you can use plastic panels under a stone.

If your house faces a roadway or pedestrian street path in a village or city, then you should pay attention to metal panels that imitate. In this case, strength is more important than the decorativeness of the material.

Decorating the facade of a house with stone panels - photo gallery

We also present to you several options for decorating the facade of a house with stone panels. Look at the photos and choose the options that you like best.

After this, decide on the material of the panels, and then you can begin to search for specific color and texture options that are offered by trade organizations near your home.

The starting profile is used to protect the end faces of PVC panels from damage. It is also used for finishing windows and door frames, slopes in places adjacent to...

To get a presentable and solid exterior of the building, it is best to choose facing bricks for the facade. Photos of ready-made facades of brick houses can show options for brick finishing....

So, you choose the materials that can be used to cover the facade of the house. Which material is better? Photos of different facades with different materials used will help you solve this...

Finishing the facade is one of the most important activities. Not only the appearance, but also performance characteristics building. One of the ways to quickly and efficiently cope with the task is to use facade panels for exterior finishing Houses. They are different from various materials With different characteristics and spring appearance.

Types of facade panels

Facade panels for exterior decoration of the house - a solid group of materials with different technical characteristics made from different materials. To choose, you need to have at least a rough idea of their appearance, features and properties.

For finishing the facades of private houses

Not all facade panels are used for cladding private houses. The point is not that it is “impossible”, but that they are not suitable, and almost all in appearance. Other reasons are the complexity of installation and high cost. Today you can find the following facade panels for exterior decoration of different types of houses. We list them all below.

Facade siding

A well-known finishing material in the form of long planks mounted on a frame. Eat traditional options painted in one of the colors, there is an imitation of timber, logs, and brickwork.

This is the most available material for finishing the facade of a house, but it is too thin and has low resistance to mechanical damage. One more nuance - sunny side fades, and not everyone likes the appearance.

Basement siding

Basement siding is also made from polymers - PVC (vinyl), polypropylene. Available in panel form rectangular shape, some with locks on the edges. Basically they imitate brickwork different colors and textures, wild or faceted stone.

Basement siding is made from polymers. The cheapest - made of polyvinyl chloride (PVC) and polypropylene

The mass from which the plinth facade panels are formed is colored in the mass, so scratches and other damage do not differ from the front surface. They differ from facade siding not only in shape and price (more expensive), but also in greater thickness (20-30 mm, versus 15 mm) and a more believable imitation of stone or brick.

Fiber cement facade panels for exterior home decoration

Fiber cement is environmentally friendly pure material, which is obtained from a mixture of fiber (small synthetic fibers) and cement. The mass is formed into boards or slabs, after which they are painted. They were invented in Japan, which is why they are also called “Japanese facade slabs”.

Fiber cement boards are a serious finishing material

Disadvantages: large mass and coloration of the surface layer (the cement base is visible on deep chips). The advantage is that the material does not burn and does not support combustion. If we talk about price, then Japanese stoves are expensive, but there are analogues of Chinese and domestic production with more reasonable prices. Chinese A-Vent groups, by the way, are of good quality. The company has been on the market for a long time, reviews are mostly good.

WPC (wood-polymer composite)

Wood ground to fibers is mixed with liquid polymer, and a dye is added. Slabs or boards (lining, planken) are formed from the resulting mass. This material is used not only for finishing facades; it is used to make flooring near the pool, in the gazebo, and on the open veranda.

In appearance, and even in tactile sensations, wood-polymer composite is very reminiscent of wood. The difference is that these “boards” do not need to be painted or varnished. They retain their original appearance for a long time. The disadvantage is considerable weight and high price. But they are durable, since they are painted in bulk, chips and damage (if any) are not visible.

Porcelain tiles

The appearance of this material is known to everyone, since a thinner variety is used for finishing the floor. Facade porcelain tiles are thicker and larger in size.

Facade cladding with porcelain stoneware has significant disadvantages: heavy weight, difficulty in cutting and installation, which entails high cost of installation work. And this is a plus to the fact that the material itself is far from cheap. The disadvantages also include an overly pompous appearance, so the architecture must be appropriate. And so, finishing a house with porcelain stoneware facade slabs is beautiful, durable, and resistant to climatic factors.

Clinker facade panels

This is a multi-layer material. A layer of insulation (expanded polystyrene) is glued onto a layer of OSB (not always available), and a thin clinker tile is glued onto it. There is only an option made from expanded polystyrene and clinker. Available in rectangular blocks with jagged edges.

Clinker facade panels - finishing and insulation in one “bottle”

The material is not cheap, but at the same time durable and attractive in appearance. In addition, simultaneously with finishing, the thermal insulation characteristics are improved. This is the only material that comes along with insulation, which is why it is also called façade thermal panels.

So which is better?

It is impossible to say unequivocally which of the listed materials is better. In appearance, many of them are similar, although there are exceptions. For example, porcelain stoneware or facade siding can hardly be confused with anything else. But all the others have a similar flourishing. So in this matter you have to focus on your own preferences.

As for the performance properties, there are no clear favorites either. All have features and disadvantages. So, based on these parameters, it is necessary to select facade panels for the exterior decoration of the house, depending on the properties of the material from which the house is built and the need for heat/wind/sound insulation.

For example, it is better to finish vapor-permeable walls without foam. It does not conduct moisture. At all. In this regard, the use of clinker thermal panels is undesirable. No, you can add it from inside vapor barrier material. The vapor barrier will block the access of moisture inside the wall, everything will be fine with the finishing. But the moisture will remain indoors. To remove it, you need a powerful ventilation system, and its installation is an expensive proposition. And it must be designed at the stage of designing the house. So thermal panels can be used on houses made of wood or aerated concrete only if they are installed on the sheathing. Direct wall mounting is no longer required.

If we talk about cost. Of all the ones listed, the most cheap way finishing - facade siding. The next most expensive are basement siding, fiber cement boards and WPC. And the most expensive are porcelain stoneware and clinker facade panels.

For decoration of industrial buildings and offices

In this section we list façade panels that are most often used to decorate offices, industrial, commercial or warehouse buildings. This does not mean that they cannot be used for a private home or cottage. It’s just that their appearance is not very suitable for a “home” in the broad sense. But houses with non-standard architecture - in the style of techno, minimalism and other similar ones - are very possible to decorate. They will look even more unusual.

Metal panels. Available in rectangular or square blocks different sizes. They are made from steel or aluminum. Steel ones are cheaper, but are susceptible to corrosion. Aluminum ones do not corrode, but are expensive. This type of facade panels for private houses is also widely used due to their “noisiness,” which makes them the least attractive of the entire group.
Metal facade panels - for houses of non-standard architecture
Translucent panels. This type of facade panels is used for finishing office high-rise buildings. They are made from transparent sheet plycarbonate or double-glazed windows - several glasses installed in one profile. In private housing construction they can be used to install winter garden, indoor , glazing large terrace, balcony, loggia. They can be made of transparent material, painted in the mass or coated (mainly mirrored on one side). It is probably possible to decorate the entire house with translucent facade panels, but for this you need to involve an architect - the material is too demanding in terms of aesthetics, and even with difficult technical specifications installation
Translucent panels - for decorating winter gardens, covered verandas, gazebos
. Available in large format blocks. These are two metal plates(the front one is very similar to corrugated sheeting), between which there is laid heat insulating material. Purpose: finishing of industrial and warehouse buildings. It is not suitable for private houses for aesthetic reasons, although it can be used for summer cottages if there are no too high requirements for appearance. It is possible to build technical premises from them - gatehouses, .
Sandwich panels - for quick construction
Aluminum composite plates. One of the varieties of sandwich panels. Between two flat sheets of aluminum there is a layer of composite material. Again, not very often seen in the private sector. There are two reasons - the high price and the same “office” look, although it may be suitable for finishing the base, since aluminum-composite finishing is not as “noisy” as just “metal”.
Aluminum composite plates - two sheets of metal with a composite layer

As you can see, any of the materials in this group can also be used to decorate a private house. The look will be non-standard. If this is what you need, choose the appropriate option.

Installation method

Facade panels for exterior decoration of a house are made of different materials, have different shape, but their installation method is very similar. During the installation process, special elements for fastening can be used, but the device is the same - based on the principle of ventilated facades. In short, the installation looks like this: a grille is assembled from profiles, and façade finishing panels are attached to it.

Facade panels for exterior finishing of the house are attached to a special frame. It is exhibited in horizontal and vertical plane, after which facade panels are screwed onto it for exterior decoration of the house.

The frame is assembled from metal and plastic profiles, sometimes used wooden blocks. Wooden beams are an economical option, since in most areas of the country they are much cheaper than metal products. But it is only suitable for materials that are light in weight and not particularly demanding on the installation system.

Facade and basement siding, fiber cement boards, WPC, and clinker panels can be attached to the bars. Only before installation, the wood must be treated with antibacterial and fire-retardant compounds. The bars can be replaced with galvanized drywall profiles. They also do a good job. But we must remember that most façade panels have their own system of profiles with special fastening elements. The standard mount usually involves hidden installation - without damaging the front surface. When replacing profiles with timber, you have to drill holes in the finishing for installing fasteners, and this is not very good, as it breaks the tightness.

The good thing about the ventilated façade system is that, simultaneously with finishing, the building can be insulated and sound insulation improved (by laying appropriate materials between the profiles). Another important advantage is that the problem of removing condensate can be easily solved. Disadvantage: significant material costs for the fastening system itself (in addition to the cost of the facade panels).

Let's take an example of how to decorate a facade with basement siding, fiber cement and clinker slabs. Why these materials? Because about, and the given materials are the closest competitors, gradually ousting it from the market.

Installation of basement siding

From traditional sheathing to linear finishing materials (siding, for example), installation basement siding differs in that the sheathing must be “in a cage” - the profiles/bars must pass at the junction of the panels. Since the basement siding looks like a rectangle, the sheathing should also look like it. Another feature is the installation of a starting and J-profile. They cover the sections of the material, provide support, and give a finished look. They are not that expensive, so there is no point in trying to get by without them.

And we must also remember that there are special corner panels for decorating the corners of the building. They are purchased separately, and often have a different color or even a different texture. This makes even a rectangular or square house look more interesting.

The procedure for installing basement siding is as follows:

That's the whole installation of basement siding. After the sheathing is assembled, the process goes quickly (if the sizes of the panels match and there are no problems with shades).

How to install fiber cement boards

Fiber cement facade panels for the exterior of a house can also be mounted on a lathing made of wooden blocks, but they will have to be fastened through, having previously drilled a hole. The standard frame for installing fiber cement slabs consists of horizontal and vertical profiles. In this case, the plates can be installed on clamps - special plates for hidden installation.

Frame assembly

The operating procedure is as follows:

When fastening with self-tapping screws, they are screwed in so that they fit into the profile. In this case, you must try to get into the technological recess (the seam between the “bricks”). In this case, the fastening is less noticeable.

Fastening fiber cement boards to the frame

Fastening with clamps is secret. In this case, the surface of the plate is not damaged. The clamps are attached to the profiles and hold the slabs with special tongues. The operating procedure is as follows:

The lower tide is installed.
The starting bar is attached.
The corners are set.
The first row of slabs is placed in the starting bar and secured with clamps on top. They are placed, trying to get into the established profiles.
The next sheet rests on the protrusions on the clamps. WITH reverse side The fiber cement board has a special seal that guarantees the tightness of the connection.

This installation method is invisible - the clamps are positioned so that they are behind the panel, and the protruding tabs are covered with the next fiber cement board.

Most ventilated facades are installed according to this principle, which includes all or almost all facade panels for the exterior of a house. The shape of the profiles and clamps, the installation step, are different, everything else is very, very similar.

Installation of clinker facade panels

As has already been said, any facade panels for exterior decoration of a house are mounted according to the same principle, so let’s only talk about the differences that are specific to clinker thermoblocks.

Features of choice

Their main difference is that they come immediately with insulation - expanded polystyrene. When choosing them, you need to choose not only the quality of the clinker (on impact metal object the sound should be clear). It is important to choose the right insulation thickness. The dew point should be within the thickness of the insulation. This is very important for normal operation (the walls will not get wet and freeze, the house will be warm and dry).

Second important point: on smooth walls(height difference no more than 3 mm) they can be mounted without lathing, directly to the wall. In this case, you need to use long dowels or self-tapping screws (when installing on wooden walls). Otherwise, the frame is assembled from wooden beam, which compensate for all irregularities.

How is installation different?

Other significant installation differences:

Clinker facade panels for exterior finishing of a house after installation look exactly the same as a house built from clinker bricks. You won’t find any differences either at first or second glance. Unless the masonry is too perfect.

Today there is a wide variety of building materials that are used for facade finishing. Of course, everyone would like to have a facade made of natural stone. This is one of best options, however, is also the most expensive. Natural stone has a high price.

If you calculate the cost of cutting it during the installation process, then finishing the facade with natural stone increases several times. And the work itself on laying it is expensive, painstaking and lengthy. But if the thought of natural stone haunts you, then its imitation will be the most suitable option for you.

For this purpose, engineers have developed special facade panels that imitate natural stone. Its structural features allow for quick installation. At the same time, it is possible to simultaneously insulate the facade. So, now let's take a closer look at what it is main feature and advantages, as well as how to correctly install facade panels.

Features of the material

TotalStone panels are made in Spain. Material composition: resin, fiberglass, and natural stone powder

Facade panels imitating natural stone can be divided into two types: having a homogeneous structure (made of PVC or its modifications) and combined panels. As for the combined panel, it has an advantage over a single-layer panel. For example, the outer layer is made of polymers, plastic, etc. The inner layer is made of sheet polystyrene foam.

This material is an excellent insulation material. Thus, it turns out that decorative facade, supplemented with insulation. Sometimes polystyrene foam can be used instead of polystyrene. Without the use of glue, the foam is connected to a coating that imitates natural stone. Locks should not be used in this case.

The main feature of this material is its excellent resistance to changes in temperature and moisture. Moreover, it copes with sudden changes even within one day. Under its influence, its deformation is completely eliminated, since it has a low linear expansion coefficient. These panels can be made with a wide variety of textures and colors. This allows you to choose the option that suits you.

Instructions - how to clad a house with stone panels with your own hands

Before proceeding with installation, it is necessary to carry out the following preparatory work:

Calculation of the need for facing material and its components

To calculate the number of panels, you need to know the area of the entire surface of the facade. From it you should subtract the sum of the area of doors and windows. Taking into account cuts and overlaps, it is necessary to add an average of 10% to the resulting area. If the panel has a complex configuration, then add 15%. As a result, divide the resulting amount by 4.55 (sq.m. in one package). Then you need to calculate the number of starting bars. To do this, the perimeter of the building should be divided into 3 meters, this is exactly the length of the plank.
After calculating the doors, cuts and overlaps, you get the final result. External corners at full height will also be needed. Height finished item is 0.45 m. Therefore, divide the sum of the entire height of each corner by 0.45 m. Accordingly, add 5% with a margin.
When installing panels, a special J-profile is used for internal corners. Its length is 3 m. Therefore, the sum of each internal corner must be multiplied by 2 and then divided by the length of the J-profile. If used for finishing, then divide the result of the length of all walls by 3 m. You can also use the J-profile to finish the door and window opening. The calculation is carried out using the same method.
Divide the sum of all openings by 3m, as a rule, add 5% for margin. A special border is used to decorate the inner corner. Its length is 0.517 m. Therefore, we divide the sum of the height of each internal corner by the size of the curb. We do the same for door and window openings, and add 5% to the amount for cuts and overlaps.
But the most important thing is the fastening material. For one panel, the technology uses 5 fasteners. For corner elements - 4 pcs., and for borders - 2 pcs. For a starting bar, 10 pieces of fasteners are required for every 30 cm.

What tools will be needed for sheathing:

Level.
Hammer.
Hacksaw with fine teeth.
Drill.
Roulette.
Circular Saw.
Screwdriver.
Construction hair dryer if necessary.
Self-tapping screw with countersunk head 30 mm (leg 4 mm, head diameter 7 mm).

Video instructions for installing German Holzplast Wandstein panels

In this video you will learn how to do your own cladding with Holzplast Wandstein panels - one of the most quality materials in your class. Automated German equipment, the best German raw materials, new optimal size, reinforced locking connection, automated painting system - all this ensures very high quality products.

Step-by-step instructions for self-installation

Plastic facade panels imitating stone - their advantages

The main advantage of facade panels imitating stone is their price. It is much smaller than natural stone. Moreover, installation work take much less time compared to stone masonry. Work can be performed at any weather conditions. There is no large amount of dust during operation.

Thanks to the corner fasteners, the time required to draw corners is significantly reduced. Due to the low weight, the load on the wall and, accordingly, on the foundation of the house is reduced. There is no need to use adhesive solutions during the installation process.

Decorative

From all of the above, one simple conclusion suggests itself: this has never happened before. building material, which literally changed the appearance of the entire house in just a few days. Now thanks to your decorative properties your facade can acquire the new kind. Moreover, its installation does not require the use of expensive equipment. Moreover, panels that are attached to each other speed up the process, so there is no need to install special frames.

Facade finishing decorative panels imitating stone will be an excellent solution for country house. Any house dressed in such a look will come to life, and with it the entire composition of the local landscape will come to life. The different palette allows you to choose even the shade individually. A carefully thought-out composition will allow the house to become a part or even one whole in the surrounding landscape.

Insulated stone panels

By installing panels on the facade, in addition to beauty, another goal is achieved. The foam layer used is also good insulation. Expanded polystyrene in its thermal insulation characteristics is significantly superior to polystyrene foam. Therefore, when covering a house with decorative panels, you can simultaneously achieve two goals: insulate and update.

On the left - thermal panel Trieste
(under natural dark slate), on the right - Corsica
(under gray climbing shoes)

Thus, there is no need to pay additionally for facade insulation. This technology will significantly reduce heat loss, which is noticeable in winter time of the year. Also, your home as a whole will be protected from the appearance of fungus, mold and dampness. This material completely prevents their appearance.

Approximate prices in Russia

Prices in the Russian Federation are quite affordable for such finishing material. For example, the “Rocky Stone” collection can be purchased on average for 430 rubles. But there are more expensive options, for example, “ Natural stone» will cost within 580 rubles.

It is worth noting that this is the amount of one package. There are 10 pieces in it, and the total is 5.32 m^2. If the facade of your house is up to 100m^2, then as a result you will need to buy approximately 20 packages, taking into account the reserve for cuts. As a result, the panel itself will cost you about 12 thousand rubles. You will also need additional components. Considering that the service life of a finished facade is on average 50 years, the amount that will be spent on it is small.

Manufacturers

The leading manufacturers of facade panels imitating stone are the following companies: Döcke-R (Germany), Novika(Canada), Nailaite(USA) and domestic manufacturer Alta Profile(Russia).

Video about German-made Döcke-R products

Video on how to turn an ordinary country house V reliable fortress- warm and beautiful.

Choosing the right type of exterior trim for your home is not an easy task. The very first condition is always beauty, elegance and solidity appearance. In addition, the outer shell of the house must perform several other functions, be durable and inexpensive.

Such conditions may be confusing and seem incompatible, but there are options that can cope with such demands. In fact, most types of exterior finishing cope with their tasks quite successfully, but the most optimal choice It appears to be the use of façade panels that imitate masonry.

Among all types of siding, they have gained the greatest popularity, the main reason for which is a successful combination operational and decorative qualities.

Facade panels are a type for exterior decoration of a house. Another name for the material is , but at the moment it is not entirely correct, since façade panels have already grown from the role of a highly specialized material to a full-fledged external covering. The original purpose of the material was to finish the lower part of the house, more precisely, the visible outer part of the foundation.

At the same time, the auxiliary material turned out to be quite capable of performing the main task, and at a higher decorative level. The aesthetic level of the sheathing fabric made from basement siding is significantly higher than that of traditional siding, this is recognized by all users.

The reason for this situation was the design of the panels, or more precisely, the imitation of brick or stone masonry that they perform. The level of repetition of texture and color is very high, since most often, when making a mold for casting the material, a part of natural masonry from one or another type of stone or brick from which the cast is made is taken as a basis.

The following materials are used for the manufacture of façade panels:

Acrylic. etc.

The most common are polypropylene and vinyl samples, as they have the best price-quality ratio. The strongest property determining high demand was the high quality of imitation stone wall. The realism of the execution is such that even close up it is difficult to determine whether it is a natural material or a copy. If we consider that the price of facade panels is many times less than that of natural samples of finishing stone, then the reasons for their popularity become clear.

During manufacturing, the surface of a certain type of finishing stone is repeated:

Granite.
Rubble stone.
Slate.
Sandstone.
Dolomite.
Flagstone, etc.

There are many examples of imitation of one or another type of stone, and each of them has a mass color options- from light to dark. The total is quite an impressive range of panels; the choice is so wide that it takes some time to simply familiarize yourself with all the offers. In this, facade panels are significantly ahead of traditional types of siding, which cannot boast of such a variety of colors and textures.

Advantages and disadvantages

The advantages of facade panels are:

Highly realistic imitation of natural materials.
Wide choose texture and color options.
A size more convenient for installation than conventional types of siding.
Light weight(light), does not overload load-bearing structures (except for fiber cement materials).
Relatively low price(does not apply to fiber cement samples).
Weather resistance, ultraviolet rays, low temperatures.
Mold and mildew do not appear, the material is not subject to rotting.
Easy to install, opportunity self-execution installation
There is no need for maintenance.
Long cladding life.

The disadvantages include:

For fiber cement samples - high prices, high weight of panels.
Plastic types of material become brittle at low temperatures.
High coefficient of expansion when heated, which requires certain installation requirements to be met.

Different types of source material bring their own pros and cons, characteristic only of certain types of facade panels and atypical for all others.

Specifications and Dimensions

Specifications depend on the material, so the numerical dimensions may vary significantly:

Length - 1-1.25 m. (Some types can have up to 6 m panel length).
Width - 0.45 m (There are samples with a width of 0.26 m).
Thickness - 1-1.2 mm (fiber cement panels have 6-12 mm thickness).
Temperature range during operation is from -50° to +60°.
Service life - On average, manufacturers claim 50 years, although these data are still purely declarative; there is no possibility of practical confirmation today.

Types of stone-look facade panels

Each manufacturer has an impressive list of varieties of stone-look facade panels. Many of them are similar to each other, but never completely repeated. There is some variation in size or configuration, but the main variety lies in the type of stone that is repeated in the cladding.

At the same time, often the name of a certain line bears a name that only indirectly names the material, for example:

Rocky stone.
Wild stone.
Canyon.
Neapolitan stone.
Fake diamond.
Florentine stone, etc.

This situation is caused big amount similar samples that need their own non-repeating names to avoid confusion.

In addition, the different materials from which the panels are made bring their own properties that distinguish this type of facade panels from similar ones. Thus, fiber cement and vinyl samples differ significantly from each other, which also gives grounds to classify them as different subgroups.

Main manufacturing companies

The high demand and popularity of the material is largely due to mass production. Of the most famous companies engaged in the manufacture wall panels under a stone, can be called:

Holzplast.
Fineber.
Nordside.
Technical equipment.
Dolomite.
Yu-plast.
Alta profile, etc.

The full list of manufacturers is too wide and is constantly growing; there is no point in listing it. The listed companies are the most famous, their products have all the necessary certificates and fully comply with modern technical and sanitary requirements, therefore, when choosing a material, you should first focus on these brands.

Installation of sheathing

The sheathing for basement siding is a load-bearing structure. It performs several important functions:

Serves as a support for the sheathing.
Allows you to combine insulation and sheathing.
Provides ventilation gap.

There are options for installing directly on the wall, without lathing, but such methods are not typical and serve solely for decorative purposes.

To create the sheathing we use:

Wooden bars.
Metal guides.
Specialized designs produced for certain types of panels.

In terms of price-quality ratio, metal guides are the leaders, which are suitable for any type of panel.

The procedure for installing the sheathing:

Cleaning wall surfaces from foreign objects, sealing problem areas, primer. IN difficult cases- complete plastering of the wall.
Marking, determination of installation points for direct suspensions (brackets).
Installation of hangers. Laying insulation and waterproofing layer.
Installation of sheathing strips over insulation. It is made on protruding petals of suspensions. It is necessary to carefully control the position of the slats so that they form as even a plane as possible.

If the thickness of the insulation does not allow one layer of planks to be used - the length of the suspension petals is not enough, then installation is carried out in two layers:

After installing the brackets, the first layer of sheathing is installed. The direction of the planks corresponds to the position of the façade panels; the distance from the wall to the top point should be no less than the thickness of the insulation.
Insulation is installed between the sheathing strips.
A counter-lattice is installed on the first layer of planks in the transverse direction - the second layer combines the functions load-bearing structure and ventilation gap.

The second method is less economical, but the need for proper and effective insulation of the house has the main priority, so they are always guided by considerations of operation, not economy.

How the panels are fastened

For fastening panels or components, they are used nails or, more often, self-tapping screws. They must have protective covering, protecting fasteners from corrosion. Galvanized self-tapping screws are usually used.

The installation of the panels is carried out according to the rules, compliance with which is mandatory - otherwise the geometry of the cladding will be disrupted or its destruction will occur.

The main condition correct installation is to comply with thermal clearances. A change in the linear dimensions of a material under the influence of temperature, which can significantly increase or decrease within one day, necessitates the need to ensure the presence of some space to compensate for the excess volume during heating.

When installing the material, the following conditions must be observed:

Longitudinal joining of any elements or installation of additional elements into grooves is not done closely, but with a gap of 3 mm in summer to 6 mm in winter.
Self-tapping screws are not screwed in all the way, a small (1 mm) gap is needed so that all elements can move freely during expansion or cooling.
The screws are installed perpendicular to the supporting surface exactly in the center of the oval holes, this will allow the sheathing elements to move freely in the desired direction.

Finishing instructions

How to cover a house with facade panels? The order of cladding is as follows (photo below):

Installation of the starting bar. To do this, you need to mark a horizontal line that will mark the bottom edge of the canvas. The starting strip is installed on it. We must not forget about temperature gaps and loose fastening of screws.

NOTE!

Some types cladding panels do not need a starting bar. For such types, it serves only as a flat reference line, which is removed after installation of the first row of panels.

Then the corner strips are installed. They are installed at the outer corners of the house and along the perimeter of window and doorways. Additional elements are used that correspond to the main panels or, alternatively, have differences in color, texture and pattern, which adds an additional decorative effect.
Installation external panels starts from the bottom left corner (usually). The first panel is cut vertically to create a straight edge, which is necessary for installation into the groove of the corner panel. The starting strip is fixed in the lock, the upper part is fastened with self-tapping screws into the oblong holes of the nail strip.
The following panels are attached in accordance with design features — usually the next panel is inserted into special slots of the previous one in order to seal the side joint as much as possible and make it invisible. The lower part is fixed in the starting bar, the upper part is attached to self-tapping screws.

All subsequent panels are fastened in a similar way until they are installed in the opposite corner profile.. To do this, the edge of the panel from the corner side is cut to the required length, inserted with one end into the slots of the previous panel, and the other into the groove of the corner profile. The lower part, as usual, snaps into the lock of the starting bar, the upper part is secured with self-tapping screws.
The next rows of panels are installed in the same way, only instead of the starting bar, the lock of the lower panels is used.
The installation of the J-bar completes the canvas, forming the top cut of the final row of panels.

Useful video

Video instructions for finishing the facade with decorative panels:

Conclusion

Stone-look facade panels are one of the most attractive and impressive types external cladding, which also performs protection functions wall materials from atmospheric manifestations and contributing to the release of steam from under the casing. With all the qualities of the material, the cost and installation procedure are quite affordable for everyone and allow you to do the work yourself without involving expensive specialists.

The panels have big choice drawing, color range, allow you to use combinations of two or more colors, creating original home design options. The popularity and demand for such material is steadily growing, manufacturers are updating their range, developing new options for patterns, colors and textures of panels. Stone-look facade panels seriously compete with traditional siding, surpassing it in many respects and confidently occupying a leading position among finishing materials.

In contact with

Facade finishing with panels

from 680 rub./m2

Finishing facades with plaster

from 350 rub./m2

Finishing facades with artificial stone

from 1250 rub./m2

We offer finishing of the facade of the house with panels at a cost of 680 rubles/m2 (10.2014). Our specialists select best materials for external cladding of a wide variety of objects. You quickly get a beautiful, warm and durable facade. Call, find out current prices and order turnkey finishing!

Paneling

Finishing work

Our specialists inspect the facade and dismantle elements that interfere with the work.
Craftsmen prepare the base for finishing: remove loose coatings, remnants of paint or other old materials. Cracks and damaged areas are repaired.
The surfaces prepared in this way are treated with a primer, which protects the walls from fungus and strengthens the base of the facade.

Note! We attach the panels directly to the prepared walls or installed sheathing. The frame is made of metal or wood. In the example below, the walls were level, so our specialists attached the panels directly to the base of the facade.

Installation work begins with marking out the horizon line along the perimeter of the building.
The base profile is attached using this marking.
Installation begins from the corner of the house. For this, craftsmen use corner elements. In their absence, ordinary panels are used. To do this, carefully cut the edge of the element at an angle of 45 degrees. This joint looks invisible.
We fasten the panels using kits for quick installation on brick foundations. Need to pre-drill mounting holes in panels.

Drilling holes in the façade panel and installing it

We also use for installation of panels adhesive mixtures and polyurethane foam.
After installing the first row, specialists perform work in the same sequence. New element installed so as to neatly align it with the fixed panel. We monitor the quality of the insulation joints and perform additional fastening of the panels using dowels.
During the cladding process, our specialists treat the joints of the panels with polyurethane foam. This ensures a tight connection. After completing the installation of all facade panels, the joints are rubbed with a special frost-resistant mixture.

Execution of work

Tips from the experts: benefits of using panels with clinker tiles

You save on wages for specialists, because at the same time as performing facing works The façade is being insulated.
When installing panels on the frame, craftsmen equip a ventilated façade - the most effective solution V modern finishing buildings.
Work is carried out in any weather conditions and sub-zero temperatures.
You get a durable façade that requires no maintenance. The surfaces of the clinker material are resistant to ultraviolet radiation.
No reinforcement of the foundation is required, while the low weight of the façade panels creates minimal additional loads on the structure.

We use all types of modern facade panels, for example, products from Döcke are very popular.

Summary

Choose best quality from professional performers. We guarantee years of trouble-free operation of the new façade. Call, find out prices and order finishing the facade of your house with panels!