Valid Editorial from 17.04.2009

Name of document	"UNIFIED TARIFF - QUALIFICATION DIRECTORY OF JOBS AND PROFESSIONS OF WORKERS. ISSUE 1. SECTION: PROFESSIONS OF WORKERS, COMMON TO ALL BRANCHES OF THE NATIONAL ECONOMY" (approved by Resolution of the State Committee of Labor of the USSR, Secretariat of the All-Union Central Council of Trade Unions dated January 31, 1985 N 31/3-30) (ed. from 04/17/2009)
Document type	resolution, list
Receiving authority	VTsSPS, State Labor Committee of the USSR
Document Number	31/3-30
Acceptance date	01.01.1970
Revision date	17.04.2009
Date of registration with the Ministry of Justice	01.01.1970
Status	valid
Publication	The document was not published in this form (as amended on January 31, 1985 - M., "Machine Building", 1986)
Navigator	Notes

"UNIFIED TARIFF - QUALIFICATION DIRECTORY OF JOBS AND PROFESSIONS OF WORKERS. ISSUE 1. SECTION: PROFESSIONS OF WORKERS, COMMON TO ALL BRANCHES OF THE NATIONAL ECONOMY" (approved by Resolution of the State Committee of Labor of the USSR, Secretariat of the All-Union Central Council of Trade Unions dated January 31, 1985 N 31/3-30) (ed. from 04/17/2009)

§ 167a. Painter

(as amended by Resolution of the USSR State Labor Committee dated December 18, 1990 N 451)

1st category

Characteristics of the work. Painting parts in adjusted drums, automatic machines using the dipping method and brush without puttying or priming. Washing parts with alkalis, water and solvents. Degreasing surfaces. Drying oil coating and priming. Grinding paint and varnish materials on hand paint grinders. Filtration of paints and varnishes. Drying painted products. Washing and cleaning of used tools, brushes, stencils, containers, parts of paint sprayers, apparatus airless spray, hoses. Receiving and tossing on workplace paint and varnish materials. Hanging parts and products on special devices and removing them after staining. Preparation of paints, varnishes, mastics, putties, primers and putties according to a given recipe under the guidance of a more highly qualified painter.

Must know: techniques for painting parts in drums, automatic machines and by dipping; general information about corrosion, scale, protection wooden surfaces from woodworms and methods of protection against them; name and types of paints, varnishes, enamels, primers, putties, compositions of putty materials; service rules drying chambers and cabinets and drying modes for products; methods of grinding paints by hand; purpose and conditions of use of painting tools: compositions and methods of washing and cleaning used tools, brushes various types, containers and paint sprayers.

Work examples

1. Fittings, insulators - coated with asphalt varnish.

2. Tanks - coloring.

3. Pitchfork - coloring.

4. Machine parts of simple configuration - painting.

5. Fences, gratings, gates, fences - painting.

6. Wrenches, sockets and special ones, pliers, wire cutters and other tools - painting.

7. Rings and rotor blades - painting.

8. Coamings, casings, decking, a set of hull parts, shaft glasses, pipes, simple foundations - degreasing.

9. Decks - wiping with diesel oil.

10. Transformer plates - painting with varnish in a drum.

11. Frames, bearing shields and safety welded structures, iron and steel castings for electric machines - cleaning and priming of surfaces.

12. Different containers - coloring.

13. Old thermal insulation in ship premises - removal.

14. Anchor chains - painted with coal tar varnish using the dipping method.

Characteristics of the work. High-quality painting of surfaces with various paints with varnishing, polishing, ornamental and artistic multi-color finishing. Surface preparation for valuable species tree. High-quality painting after priming using cold airless spray. Priming, anti-corrosion coating, coating with anti-fouling and anti-fouling paints, anodic and cathodic protection of ships exposed to sea water, mineral acids and alkalis. Restoration of artistic inscriptions.

Must know: how to do it painting work with artistic and ornamental finishing and cold airless spray method; the process of cutting surfaces for valuable wood species; recipe, physicochemical characteristics coloring materials and compositions for artistic painting and finishing; types of complex paintings and fonts; properties and types of pigments, solvents, oils, varnishes, silicates, resins and other materials used in painting; methods for testing varnishes and paints for durability and viscosity; technical specifications for final finishing of products, parts and surfaces; drying modes for paint and varnish coatings; requirements for the preparation of surfaces for anti-corrosion, anodic and cathodic protection; protective schemes for priming and painting the underwater part of ships exposed to sea water, mineral acids and alkalis; methods of restoration of artistic inscriptions.

Work examples

1. Passenger cars of the ZIL and Chaika brands - final painting, finishing with varnishes and enamel paints.

2. Coats of arms, ornaments, complex inscriptions - artistic execution based on sketches and drawings.

3. Instrument housings for export - painting according to 1st finishing class.

4. Device housings operated in sea water, in tropical conditions - coloring.

5. Ship hull, ship structures and surfaces of ship premises (compartments, tanks, tanks) - priming and painting by hot air and airless spraying of paints and varnishes.

6. Vessel hull and other metal structures in the underwater part - measurements of specific transverse resistance paint coating with preliminary marking of measurement points.

7. Superstructure of passenger ships - painting.

8. Panels, boards, diagrams - artistic surface finishing.

9. Interiors of ships, passenger aircraft, tourist and service passenger cars - finishing in metal, wood, plastic.

Characteristics of the work. High-quality painting of surfaces with dry powders, various paints and varnishes in several tones and finishing of surfaces with grinding, varnishing and polishing. Trimming and flanging of painted surfaces. Pulling panels with shading. Drawings on surfaces using stencils in four or more tones. Cutting surfaces for complex patterns various breeds wood, marble and stone. Independent compilation of complex colors. Restoration of painted surfaces, lincrust, linoleum and other materials. Paint and varnish coatings for glass and ceramic enamel. Production of complex stencils and combs for cutting painted surfaces. Gluing carpet linoleum, pavinol and other materials. Painting after priming surfaces using cold airless spray. Painting of parts, products, devices in tropical design. Interoperative protection with phosphating primers sheet material and profile rolled products for ship tanks of drinking, distilled and feed water, medical and technical fat. Mechanized cleaning of ship hulls from corrosion, scale, fouling and old paintwork using shot blasting machines with delivery of work using samples and standards and under water high pressure. Determining the quality of the paints and varnishes used. Adjustment of mechanisms used in painting work.

Must know: the structure and methods of adjusting mechanisms and devices used in painting work; methods of performing painting work with a high-quality finish; the process of cutting surfaces into complex patterns of various types of wood, marble and stone; features of mechanized cleaning of surfaces and bodies from fouling and old paintwork; technical conditions and requirements for painting and varnishing; methods for restoring painted surfaces, lincrust, linoleum and other materials.

Work examples

1. Passenger cars, except for the ZIL and Chaika brands, and buses - final painting, finishing and polishing.

2. Waterlines and recess marks - painting with synthetic and oil paints.

3. Parts for export and exhibition exhibits - painting according to 1st finishing class.

4. Special ship products (3s-95, UPV) - painting according to 1st finishing class.

5. Boats - painting.

6. Cases, base brackets, cast parts of complex configuration - painted in class 2 finish.

7. Bearing housings for export - painting in 1st - 2nd finishing class.

8. Housings of devices and units, covers, panels, front frames, brackets, antennas - painting according to 1 - 2 finishing class, external decorative painting.

9. Ship hull, ship structures and surfaces of ship premises (compartments, tanks, tanks) - priming and painting by cold air and airless spraying of paints and varnishes.

10. Fairings - painting.

11. Decks in residential and service areas of ships - linoleum, relin, egelite flooring.

12. Surfaces of structures - application of Adem mastic using a Plast apparatus.

13. Metal surfaces are closed, close and hard to reach places(shafts, compartments, tanks) - priming and painting with epoxy paints.

14. Linen surfaces of aircraft cabins - multi-layer coating with varnishes and paints.

15. “VARNISH” coating - measurement of special parameters.

16. Residential and service premises - leveling deck surfaces with mastics for gluing linoleum.

17. Stators and rotors - coating of internal and external diameters, windings with electrical insulating enamels and varnishes.

18. Walls, shelves, furniture outside and inside, ceilings and roofs of locomotives, all-metal cars, cooled cars, insulated cars with a metal body and ship cabins - painting and varnishing with a brush, spray or roller.

19. Ships, fuselages, aircraft wings and walls of tourist and service cars - applying distinctive inscriptions and markings.

20. Trolleybuses and subway cars - final painting and finishing.

21. Drinking tanks - painting.

22. Electrical appliances, large-sized electric machines - painting and polishing.

Educational and thematic plan

"Painter (for metal)"

4th category

(Profession code 13450)

		Total hours	Including:	Forms of control
		Total hours		Forms of control
I.				Oral survey, test
	Economic course

	General technical course
	Materials Science


	Special course
	Special technology
	Introduction

	Determining the quality of applied paints and varnishes
	How to Perform Painting Jobs with a High Quality Finish
	Technological conditions and requirements for painting and varnishing
	Features of mechanized cleaning of surfaces and housings from fouling and old paintwork

	Specifications for final finishing of the product, parts and surfaces

	Environmental protection
II.	Practical training
	Introductory lesson
	Occupational safety, fire safety and electrical safety
	Training in techniques, operations, types of work performed by a 4th category painter
	Independent performance of work by a 4th category painter

	Consultations
	Qualifying exam			Qualifying exam
	Total:

Painter (for metal) 4th category

Must know:

Design and methods for adjusting mechanisms and devices used in painting work;

Methods of performing painting work with a high-quality finish;

The process of painting (cutting) surfaces to create a complex pattern of various types of wood, marble and stone;

Peculiarities mechanical cleaning surfaces and bodies from fouling and old paintwork;

Technical conditions and requirements for painting and varnishing;

Methods for restoration of painted surfaces;

Should be able to :

Produce high-quality painting of surfaces with various paints and varnishes in several tones and finish surfaces with grinding, varnishing and polishing;

Extend the panels with shading;

Apply a design on the surface using stencils in four or more tones;

Carry out cutting metal surfaces under the complex pattern of various types of wood, marble and stone;

Create complex colors yourself;

Restore painted surfaces;

Make complex stencils and combs for cutting painted surfaces;

Paint after priming surfaces using airless spraying;

Paint parts, products, devices in a tropical design;

Carry out inter-operational protection with primers, sheet and profile material phosphating coatings for ship tanks for drinking, distilled and drinking water, medical and technical fat;

Clean ship hulls from corrosion, scale, fouling and old paintwork using shot blasting and abrasive blasting machines, performing work using samples and standards and high-pressure water;

Determine the quality of the paints and varnishes used;

Adjust the mechanisms used in painting work;

Be able to apply a paint coating of a given thickness (µm) using painting machines;

Examples of work for the 4th category

1. Passenger cars, buses - final painting, finishing and polishing.

2.Waterlines and marks, recesses - painting with synthetic and oil paints.

3. Parts for export and exhibition exhibits - painting according to 1st finishing class.

4. Special marine products painted in 1st finishing class.

5.Boats-painting.

6. Housings, base brackets, cast parts of complex configuration - painted in class 2 finish.

7. Bearing housings for export - painting according to 1-2 finishing class.

8. Instrument and block housings, covers, panels, front frames, brackets, antennas - painting according to finishing class 1-2, external decorative painting.

9. Vessel hull, ship structures and surfaces of ship premises (compartments, tanks, tanks) - priming and painting by air and airless spraying of paints and varnishes.

10. Fairings - painting.

11. Floors in residential and service areas of ships - painting.

12. Surfaces of structures - applying mastic, putty.

13. Surfaces of metal closed, cramped and hard-to-reach places (shafts, compartments, tanks) - priming and painting with polyurethane and epoxy paints.

14. The canvas surfaces of aircraft cabins are multi-layered with varnishes and paints.

15.Paint and varnish coatings - special parameters.

16. Residential and service premises - leveling deck surfaces with mastics and putties. Stators and rotors - painting of internal and external diameters, windings with electrical insulating enamels and varnishes.

17.Walls, shelves, roofs of locomotives, all-metal cars, cars with machine cooling, isothermal cars with a metal body and cabins of ships - painting and varnishing with a brush, spray or roller.

18. Ships, fuselages, aircraft wings and walls of tourist and service cars - applying distinctive inscriptions and markings.

19. Trolleybuses and metro cars - final painting and finishing.

20. Drinking tanks - painting.

21.Electrical appliances, large-sized electric machines - painting and polishing.

Educational and thematic plan

professional development programs for workers

"Painter (for metal)"

5th category

(Profession code 13450)

	Name of sections, disciplines and topics	Total hours	Including:		Forms of control
	Name of sections, disciplines and topics	Total hours		practical, laboratory, seminars	Forms of control
I.	Theoretical training in the profession				Oral survey, test
	Economic course
	Economics of enterprise and industry
	General technical course
	Materials Science
	Recipe, physical and chemical properties of coloring materials
	Test methods for varnishes and paints for durability and viscosity
	Special course
	Special technology
	Introduction
	Industrial sanitation and occupational hygiene of workers
	Painting production technology
	Painting after priming using cold airless spray
	Priming, anti-corrosion coating, anodic and cathodic protection of ships

	Labor protection, fire safety and electrical safety
	Environmental protection
II.	Practical training				Keeping a diary of industrial training, testing, quality control of work performed
	Introductory lesson
	Occupational safety, fire safety and electrical safety
	Training in techniques, operations, types of work performed by a 5th category painter
	Self-execution complex work 5th category painter
	Final practical qualification work
	Consultations
	Qualifying exam				Qualifying exam
	Total:

Tariff and qualification characteristics

Painter (for metal) 5th category

Must know:

Methods of performing painting work with artistic and ornamental finishing and airless spraying;

The process of painting surfaces to resemble valuable wood species;

Recipe, physical and chemical properties of coloring materials and compositions for artistic painting and finishing;

Properties and types of pigments, solvents, solvent oils, oils, resins and other materials used in painting;

Methods for testing varnishes and paints for durability and viscosity;

Technical conditions for the final casting of products, parts and surfaces;

Drying modes for paint and varnish coatings;

Requirements for preparing surfaces for anti-corrosion protection;

Protective schemes for priming and painting the underwater part of ships exposed to sea water, mineral acids and alkalis;

Methods for restoring artistic inscriptions;

Labor safety rules, industrial sanitation And fire safety.

Should be able to :

Perform high-quality painting of surfaces, solid, lattice, large-sized metal structures with various paints with varnishing, polishing, ornamental and artistic multi-color finishing;

Paint surfaces to resemble valuable wood species;

Carry out high-quality painting after priming using airless spray;

Perform priming, anti-corrosion coating, coating with anti-fouling and anti-fouling paints;

Paint vessels exposed to sea water, mineral acids and alkalis;

Restore artistic inscriptions;

Comply with labor safety rules, industrial sanitation, fire safety and electrical safety rules.

Examples of work for the 5th category

1. Passenger cars, final painting, finishing with varnishes and enamel paints.

2. Coats of arms, ornaments, complex inscriptions - artistic execution based on sketches and drawings.

3. Instrument housings for export - painted according to the 1st finishing class.

4. Instrument housings used in sea water, in tropical conditions - painting.

5. Vessel hull, ship structures and surfaces of ship premises (compartments, tanks, tanks, holds) - priming and painting by hot air and airless spraying of paints and varnishes.

6. Vessel hull and other metal structures in the underwater part - measurements of the specific transverse resistance of the paint and varnish coating with preliminary marking of measurement points.

7. Superstructure of passenger ships - painting.

8.Panels, boards, diagrams - artistic surface finishing.

9. Salons of ships, passenger aircraft, tourist and service passenger cars - finishing of metal, wood, plastic;

10.Facade parts of bridge structures - painting.

ETKS works and professions of workers Issue 1

(approved by the resolution of the State Committee for Labor of the USSR, the secretariat of the All-Union Central Council of Trade Unionsdated January 31, 1985 N 31/3-30) (as amended on October 12, 1987, December 18, 1989, May 15, June 22, December 18, 1990, December 24, 1992, February 11, July 19, 1993 , June 29, 1995, June 1, 1998, May 17, 2001, July 31, 2007, October 20, 2008, April 17, 2009)

Educational and thematic plan

professional development programs for workers

"Painter (for metal)"

6th category

(Profession code 13450)

	Name of sections, disciplines and topics	Total hours	Including:		Forms of control
	Name of sections, disciplines and topics	Total hours		practical, laboratory, seminars	Forms of control
I.	Theoretical training in the profession				Oral survey, test
	Economic course
	Economics of enterprise and industry
	General technical course
	Materials Science
	Physico-chemical properties of antifouling thermoplastic paints
	Antifouling paint protection schemes
	Special course
	Special technology
	Introduction
	Industrial sanitation and occupational hygiene of workers
	Painting production technology
	Device and methods for setting up installations for hot airless spraying
	Technology for applying antifouling thermoplastic paints using devices
	Specifications for final finishing of products, parts and surfaces
	Labor protection, fire safety and electrical safety
	Environmental protection
II.	Practical training				Keeping a diary of industrial training, testing, quality control of work performed
	Introductory lesson.
	Occupational safety, fire safety and electrical safety
	Training in techniques, operations, types of work performed by a 6th grade painter
	Independent performance of particularly complex work by a 6th category painter
	Final practical qualification work
	Consultations
	Qualifying exam				Qualifying exam
	Total:

Tariff and qualification characteristics

Painter (for metal) 6th category

Must know :

Methods of implementation and requirements for the quality of experimental painting and finishing of products and surfaces;

Device and methods for setting up installations for airless spraying of paints and varnishes and devices for applying thermoplastic paints;

Antifouling paint protection schemes;

Methods of restoration of artistic paintings and drawings;

Rules for occupational safety, industrial sanitation and fire safety.

Should be able to:

Perform experimental painting and finishing of products and surfaces when introducing new dyes and synthetic materials;

Restore artistic paintings and drawings;

Carry out decorative varnishing and polishing of interior surfaces;

Paint after priming surfaces using hot airless spraying on installations;

Apply antifouling thermoplastic paints using machines;

Protect antifouling paints with preservative paints according to a special scheme;

Paint according to drawings and sketches by hand;

Comply with labor safety rules, industrial sanitation, fire safety and electrical safety rules.

Examples of work for the 6th category

1. Ship structures - application of thick-layer coatings.

2. Surfaces interior walls passenger ships, airplanes, carriages - painting based on drawings and sketches by hand.

3. Salons, lobbies, “Lux” cabins of passenger ships, airplanes, carriages and pleasure yachts - artistic decoration, protective coating.

4. Exhibits of exhibition machines, apparatus and instruments - multi-layer and multi-color painting, varnishing, grinding and polishing.

5. Tanks (containers) for distilled and drinking water, medical and technical fat (oil).

ETKS works and professions of workers Issue 1

font size

UNIFIED TARIFF - QUALIFICATION DIRECTORY OF JOBS AND PROFESSIONS OF WORKERS - ISSUE 2 - PART 2 - SECTIONS MECHANICAL PROCESSING... Relevant in 2018

§ 44. PAINTER

4th category

Characteristics of the work. High-quality painting of surfaces with dry powders, various paints and varnishes in several tones and finishing of surfaces with grinding, varnishing and polishing. Trimming and flanging of painted surfaces. Pulling panels with shading. Drawings on surfaces using stencils in four or more tones. Cutting surfaces into complex patterns of various types of wood, marble and stone. Independent compilation of complex colors. Restoration of painted surfaces, lincrust, linoleum and other materials. Paint and varnish coatings for glass and ceramic enamel. Production of complex stencils and combs for cutting painted surfaces. Gluing carpet linoleum, pavinol and other materials. Painting after priming surfaces using cold airless spray. Painting of parts, products, devices in tropical design. Interoperational protection with phosphating primers of sheet material and rolled profiles for ship tanks of drinking, distilled and feed water, medical and industrial fat. Mechanized cleaning of ship hulls from corrosion, scale, fouling and old paintwork using shot blasting machines with delivery of work using samples and standards and high-pressure water. Determining the quality of the paints and varnishes used. Adjustment of mechanisms used in painting work.

Work examples

1. Passenger cars, except for the ZIL and Chaika brands, and buses - final painting, finishing and polishing.

2. Waterlines and recess marks - painting with synthetic and oil paints.

3. Parts for export and exhibition exhibits - painting according to 1st finishing class.

4. Special ship products (3s-95, UPV) - painting according to 1st finishing class.

5. Boats - painting.

6. Cases, base brackets, cast parts of complex configuration - painted in class 2 finish.

7. Bearing housings for export - painting in 1st - 2nd finishing class.

8. Housings of devices and units, covers, panels, front frames, brackets, antennas - painting according to 1 - 2 finishing class, external decorative painting.

9. Ship hull, ship structures and surfaces of ship premises (compartments, tanks, tanks) - priming and painting by cold air and airless spraying of paints and varnishes.

10. Fairings - painting.

11. Decks in residential and service areas of ships - linoleum, relin, egelite flooring.

12. Surfaces of structures - application of Adem mastic using a Plast apparatus.

13. Surfaces of metal closed, cramped and hard-to-reach places (shafts, compartments, tanks) - priming and painting with epoxy paints.

14. Linen surfaces of aircraft cabins - multi-layer coating with varnishes and paints.

15. “VARNISH” coating - measurement of special parameters.

16. Residential and service premises - leveling deck surfaces with mastics for gluing linoleum.

17. Stators and rotors - coating of internal and external diameters, windings with electrical insulating enamels and varnishes.

19. Ships, fuselages, aircraft wings and walls of tourist and service cars - applying distinctive inscriptions and markings.

20. Trolleybuses and subway cars - final painting and finishing.

21. Drinking tanks - painting.

22. Electrical appliances, large-sized electric machines - painting and polishing.