For convenient homework You don’t have to buy an expensive computer desk; you can easily make one yourself. This item furniture can be assembled from the most various materials, choosing the desired shape and configuration. To make a corner one, you need not only to select the appropriate dimensions, but also to determine what exactly the structure should have and what functions it should perform. Before starting work, it is recommended to draw up detailed project or a drawing that will display all the required information (Image 1).
Image 1. Diagram of a computer desk.
Computer desk project
How to make a computer desk with your own hands without outside help? It will be necessary not only to compile detailed drawing, but also calculate the materials and cut them.
Before drawing up a project, pay attention to the following parameters:
Image 2. DIY drawing of a computer desk.
- table functionality. Consider whether it should have drawers, pull-out shelves, special stands for equipment and books;
- It is important to provide the dimensions of the swivel chair so that the table is comfortable to use. Usually the sizes are taken standard, all office chairs almost no different from each other;
- for convenience, the height of the structure is selected within the range of 700-750 mm, including the tabletop. If the table is made for a child, then its height may be slightly smaller;
- The dimensions of the office equipment that will be installed must also be taken into account, so that later you do not have to mount an additional shelf for the printer. Take the time to take a ruler to take additional measurements of office equipment before making drawers and shelves;
- It is important to take into account the parameters of the room where the table will be installed. It is recommended to place it in such a way that the light falls correctly, the chair moves freely, and the sitter does not feel discomfort when using the furniture.
When performing calculations, it is important to indicate all dimensions in the drawing, including the thickness of the side walls and countertops. This will allow you to quickly cut sheets of material and perform assembly easily and efficiently. The drawing should show the location of the fastening elements and their number. Pay attention to the picture on how to do this correctly (Image 2).
Return to contents
Materials and tools
To work at a computer, you need to prepare tools and materials. To work you will need:
- long metal and short ruler;
- a simple pencil;
- end plane;
- square;
- screwdriver;
- jigsaw;
- drill, set of drills, depth stop, which will allow you to drill blind holes;
- Circular Saw;
- brushes for varnish or paint.
From the materials that are necessary for installing a comfortable desktop, you need to take:
- MDF boards. You need to take sheets with dimensions of 2440 × 1220 × 15 mm; during work they are cut according to the design. The side surfaces are made from such plates, drawers and shelves;
- pine boards measuring 1200x150x25 mm, you need to take 2 pieces, they are used to strengthen the structure;
- for fastening it is worth taking 120 screws, dimensions - 3x15 mm, the head must be countersunk;
- ties for corners of plastic structures – 40 pcs.;
- pull-out guides, the number depends on the number of drawers and pull-out shelves;
- self-adhesive or end edge, which will form the edge for shelves and drawers;
- sanding paper for processing edges;
- wood primer, varnish or paint for finishing.
Return to contents
Table assembly
You need to start work by assembling the side parts. Guides are screwed to the surfaces of the boards; they are necessary for drawers and shelves. Afterwards, all the side modules are assembled on the dowels. It is recommended to add PVA construction glue to the sockets; it will make the fastenings more reliable. To strengthen the fastenings, you can insert thin wooden planks. An example of assembly is shown in the figure (Image 3).
As the main material for the side walls, you can use ordinary fiberboard boards, but it is best to take MDF sheets, the thickness of which is 10 mm.
Image 3. Drawing of a computer desk with top shelves.
Such walls are perfectly fastened with self-tapping screws. Next, the table is assembled with your own hands using spare parts for the drawers. To assemble the boxes, MDF 10 mm thick is used. When installing, it is important to strictly observe right angles, since this will determine how easy and convenient it will be to use the boxes. All dowels are carefully inserted into the sockets, which are better coated with glue for reliability.
The side cuts of the shelves are covered with edge tape; it is enough to iron it with a regular hot iron. To protect the tape, it is best to use a strip of paper to prevent the edge from becoming blistered. If necessary, the excess edges are cut off with ordinary scissors, but this must be done very carefully. Wooden planks are glued to the front and back sides of the shelves, and their dimensions must fully correspond to the parameters of the part. This is necessary so that the retractable shelf can move freely along its guides.
A good computer desk helps make working on a computer more convenient and efficient. Modern models tables have interesting design, which will harmoniously fit into any interior.
The choice of model can be made based on the set of devices that need to be placed on the table. It all depends on the type of computer, you can put a laptop on the table, or you can have a stationary device. The latter takes much more space, besides, the existing printer needs its own corner on the table.
If you have a large selection of computer literature, you need to choose a type of table with many shelves for books or disks. The table can be angular or straight. Before choosing it, you should decide on the place where the furniture will be placed.
Types of computer desks
There are three main types of computer desks:
- straight shape;
- angular shape;
- combined form.
The straight table is classic version for users who do not use the computer very often. This shape is great for office work, it will not distract attention from work.
The corner shape of the table is suitable for those who spend a lot of time at the computer. It is worth considering that there is little space on such a table surface. Therefore, it will not be possible to place various stationery and paper supplies on it.
IMPORTANT! A table located in the corner has a bad effect on the psyche. Corner desks are not used in offices.
The combined form combines the two previous table options. The disadvantage is that the design requires a lot of space to accommodate. It has many shelves and drawers for storing documentation and other things.
Design and drawings
The types and sizes of homemade computer desks are limited only by imagination, material, and location. Having chosen the appropriate shape, you can begin to design the dimensions.
A comfortable table will be obtained when it suits the user’s height. It should be multiplied by 75, and the resulting result is divided by 175. As a result, we have the desired height table.
Then, a diagram and drawing are made for the manufacture of a computer desk. Its complexity depends on the chosen model. Therefore, if you don’t want to tinker with the design for a long time, you should choose the simplest type of design.
In design simple table The following components must be included:
- Availability pull-out shelf for keyboard;
- monitor space;
- shelf for storing small items;
- presence of boxes;
- several upper shelves on which you can put books.
This option has enough space for all computer peripherals. The location of all parts of the table depends on the designer's imagination.
How to assemble a table
Having found necessary instructions how to make a computer desk with your own hands, you should start preparing the tool:
- jigsaw;
- electric drill, drill;
- screwdriver;
- pencil.
When making a table from chipboard, to ensure smooth edges, you should carefully cut the material. In this case, a lot of sawdust will appear, and it is better to prepare a vacuum cleaner in advance.
If you don’t have the skills to work with a jigsaw, then you can use the services furniture factory. They will make an even cut, and the edges will turn out without chips.
The overall design of the table should have the following elements:
- two side racks;
- central stand;
- table;
- back wall;
- pull-out keyboard stand;
- several internal shelves.
After cutting out the parts is completed, you can begin assembly. You need to make 2 holes in two side and central pillars. They are needed to attach the bottom shelf, which is attached to self-tapping screws or confirmants. The top shelf is mounted using the same method.
Next, the back wall is installed. It is attached so that the upper corners coincide with the corners of the side posts and the central wall. They are also attached with self-tapping screws. For a pull-out shelf, guide rails are attached to the table. The same action is done with the shelf itself.
The tabletop is attached to the side walls. Holes are drilled in them into which dowels lubricated with PVA are mounted. Holes should be drilled in the countertop, not through, but with sufficient depth. The holes of the racks and the table top must match, otherwise they will not be able to be secured.
If there are not enough shelves on top, then additional ones can be installed on dowels. The assembly of the wooden table can be considered complete. All that remains is to place it in the chosen location.
There are many on the Internet various photos computer tables. Every fan will find a suitable option for themselves.
Constructions wooden tables- these are the simplest and most accessible products for self made. Not many people can make their own table out of metal and plastic.
DIY photo of computer desks
Century modern technologies characterized primarily by an abundance of functional equipment, the task of which is to make a person’s life easier. Not last place occupied by computers and laptops. Agree, today you rarely meet a person who does not have this technique. This is, of course, good. But a computer or laptop needs to be placed somewhere, and it’s not always possible to buy ready-made furniture the best option. It’s expensive, and you don’t always find what you want in your room. Eat great way decide this problem- make a computer desk with your own hands. This is what we will do in our article.
Where to start
Before you make a computer desk with your own hands, you need to clearly imagine what you want to get in the end. In other words, we need a project. And if you are determined and want to end up with furniture that will be a real solution, you should think it through down to the smallest detail.
First of all, pay attention to the functionality of the table. Estimate whether they will be needed additional shelves, boxes, special stands. It might make sense to make pull-out shelves.
Next, it is important to consider the height of the structure. It is recommended to make a standard ordinary computer table with your own hands within 750 mm. These dimensions also include the tabletop. For a child, you can choose a lower height.
Do not lose sight of the expected size of office equipment and the number of items. Before cutting out shelves and making drawers, you need to measure everything using a ruler or tape measure. Then you won't have to redo it in the future.
And finally, you need to take into account the general parameters of the room and the place where you plan to put the furniture. It should be comfortable and the lighting should be correct. Only then will the person sitting at the table not feel discomfort while working. The same parameters should be taken into account if you want to make a laptop table with your own hands.
DIY table video
Materials and tools that will be required for work
Making a computer desk with your own hands is a labor-intensive process that requires patience and attention. After drawing up the project, you need to decide on the materials that will be used. Most often, tables are made from:
- natural wood;
A table for a computer or laptop made of wood is preferable to others, but it will cost much more and will still have to be varnished. MDF and chipboard are much cheaper materials and are not much inferior to solid wood. In addition, they tolerate well high humidity and are insensitive to damage.
What material to choose is a matter of taste. But the tool with which the work will be performed must be available. Most often, the usual set is used, which every man has, even a not very experienced master:
- hacksaw, electric jigsaw;
- Grinder;
- drill;
- screwdriver;
- chisel;
- roulette;
- square
Naturally, this list may be slightly different, since it all depends on the design of the homemade computer desk with your own hands.
Several ways to make a table for office equipment
As mentioned above, it is not necessary to have special construction skills in order to make a computer desk with your own hands. Will be sufficient basic knowledge, desire and patience. For a more complete picture of the upcoming scope of work, we will give several ways to make a table for a computer with your own hands.
Method one: a simple rectangular table made of MDF
For work we need MDF board thickness of at least 16 mm, a set of tools from the list above, screws, glue, fittings. First of all, we measure the place where the furniture is planned to be installed: width, length and depth. Based on these parameters, when making a computer desk with your own hands, drawings are drawn up. Only after completing these steps can you cut the MDF into pieces and then mount the table:
- Using a screwdriver and self-tapping screws, we attach the side parts with guides.
- The side modules are assembled using dowels. Greater strength can be achieved using special glue
- We use 4 mm thick MDF as the back wall and assemble the table walls into a single whole.
- Using the drawing, we cut out the elements of the drawers and shelves, make a fitting and secure the drawers with clamps. Side surfaces processed with edge tape.
- On the underside of the tabletop of the computer table, we mark with our own hands the places where the support stands are attached. Using a drill, drill out blind holes.
- Using screws, we attach the cabinets to the inverted tabletop.
- We turn it over, fasten the hinges, hang the doors and put the drawers and shelves in place;
- We attach the stand under the monitor using round blocks of wood, piping and glue.
- We cover the made table with a primer and paint it desired color and begin to use it for its intended purpose.
Tip: in this way you can make a computer desk from chipboard with your own hands and use any other material.
Method two: corner computer desk
Now let's look at how to make a corner computer desk with your own hands. This work will require a little more attention, but the result will please you - empty corner rooms will function, and free space, however, will not become smaller.
So, for work we will need the following tools and materials:
- screwdriver or screwdriver;
- drill;
- clamps;
- wooden dowels;
- electric saw;
- knife, sharp enough;
- iron, edge tape, ruler, square and pencil;
- wood glue;
- self-tapping screws
We will take 16 mm thick MDF sheets as the material, and hardwood for the support elements.
To begin with, we measure the space and make a drawing, according to which we carry out the detailing of the objects.
If you don't know how to work with drawings, look up ready material. To make a corner computer desk with your own hands, drawings can be found on the Internet.
Having prepared all the parts, we adjust everything to size and proceed to assembly, which must be done in stages.
1. We assemble the side parts of the table on dowels, screw in the guides for the shelves inside and the drawers that will be pulled out. You can strengthen the fastening with glue.
2. We secure the rear walls with self-tapping screws.
3. We process the side edges of all structures with edging tape, gluing it with paper and a hot iron. Cut off the excess part with a knife.
4. On the inside of the tabletop, mark the places for the support pedestals and drill blind sockets. We turn the tabletop over and attach the cabinets in this position.
5. Next, we return the table to its normal position, fasten the side doors, install drawers and shelves.
6. Upper structure We fasten them from the shelves with ties and place them on the table, installing a stand under the monitor.
7. The table is ready. All that remains is to paint it to match general interior. Thus, assembling a computer desk with your own hands is not as difficult as it seems.
If there is a laptop in the house
We've discussed how to make a computer desk yourself. But what to do if there is a laptop in the house instead of a computer? It would seem that the thing is quite mobile and does not require additional stands. But, as practice shows, lying in bed or on the sofa with a laptop in your hands is not always comfortable. Therefore, now we will make a laptop table with our own hands.
The easiest and free option
First of all, let's consider a design that does not require special construction skills and not a penny of financial investment. It’s tempting to make such a table for a laptop with your own hands. You can use the details old furniture, remnants from repairs and other scraps of any building material.
You only need three parts: 2 side parts and a tabletop. Its size will depend on the size of the equipment. We will make a tabletop 270x660 mm. It’s easy to cut, the main thing is to measure it exactly.
It will be a little more difficult with the side strips: they must have a beveled side, which is attached to the tabletop. The dimensions of the side walls are 270×205×255×280 mm. it turns out that the back of our table will be raised by 280 mm, and the front will be lowered by 205 mm. Thus, a small DIY computer desk for a laptop will have a slope, which will make it very convenient for work.
The side parts are attached to the tabletop using self-tapping screws and are additionally reinforced with small corners. This enhances the strength and reliability of the structure. All that remains is to paint or finish it to your taste and preference. There is nothing difficult in such a design, and if a person likes to study or have fun while reclining, then why not think about how to make a laptop table with your own hands.
Another way: a folding table for a laptop
The folding design of the table is a little more difficult to make, but if you often move from place to place, it’s worth thinking about how to make a laptop table convenient and mobile. Will be required following materials and components:
- tabletop material;
- side wall material;
- screws or self-tapping screws;
- 4 folding mounts having a lock.
You can use any material that is available. We cut out the tabletop 600×400 mm, the side legs - 400×310 mm. Using a ruler and pencil, mark with inside table tops, places for installing fasteners for legs. We make holes for the screws, fasten everything securely and that’s it - our DIY computer desk, the photo of which you see, is ready.
Under no circumstances forget to record folding design in the right position. When folding the table, be sure to remove the latch.
As you can see, there are a lot of ways to make a computer desk with your own hands. The article discussed only the most accessible and simple ones. But there are craftsmen who are able to create furniture that you cannot find in any store.
Well, for clarity, watch the video on how to quickly and easily make a computer desk with your own hands, using the information from which you will cope with the problem easily and naturally.
Now almost every person has a tablet or personal computer. And if you can work with the first two devices even while lying on the couch, then this will not work with a PC. Therefore, for the convenience and health of users, it is recommended to work or play on a computer while sitting at a specially equipped table. Today's HouseChief editorial review is dedicated to how to make a computer desk with your own hands.
Read in the article
Design features of computer desks
Recommendation! Mark the halves of the guides and install them on the sides while the cabinet is not yet assembled. Believe me, it will be much simpler and easier. To install the guides, use a special template, of which there are many on the Internet.
How to make a computer gaming table with your own hands
Computers are used for more than just work, and most users are happy with their purchases. powerful cars especially for games. A regular computer desk is not suitable for gamers because it requires a lot of space for multiple monitors, speaker system, MFPs, keyboards and game consoles. A gaming table can be purchased in a store or made by yourself.
Drawings and assembly diagram of a computer desk
A gaming desk is practically no different from a traditional PC design. The difference is larger area countertops, since you need to place at least 2-3 monitors, office equipment and game consoles. Also, instead of drawers for papers and office supplies, powerful speakers are installed in the cabinets. Gaming tables, like designs for ordinary work PCs, can be rectilinear, angular and cantilever.
Before assembling a computer desk for gamers, you need to carefully think through everything: how many monitors will be installed, what office equipment will be used, your preferences and capabilities. It is also necessary to provide a cable channel, since with such a large number of different equipment there will be a lot of wires and it is undesirable for them to dangle each on their own.
Assembling a table for a gaming computer with your own tables
Making a gaming computer desk is no different from previous options, with the exception of a few nuances related to the design features. Watch the video instructions for making corner table plywood for gaming PC
Review of prices for computer desks
Modern manufacturers offer a fairly large assortment of computer tables, both for work and play. We suggest you familiarize yourself with the prices of the most popular models. The cost of tables depends on the materials, design, brand and region of sale.
| Manufacturer and model | Material, parameters | Average cost, rub. (as of March 2019) |
| 12 590 | |
