10% MORE LIGHT
Biochemical laboratory experiments have shown that bright sunlight promotes the formation of serotonin, a hormone responsible for energy and mood. And sunlight enters our houses through windows. Therefore, when arranging an apartment or house, we special attention we choose a window design, the perfection of which determines the indicator natural light living space.
HARMONY OF LIGHT AND STYLE
Windows made from REHAU DELIGHT-Design profiles will be an excellent investment if you value an atmosphere of light, warmth and comfort, individual design and high functionality.
5
cameras,
70 mm profile,
2
seal contours
More joy!
Know-how technical solution DELIGHT-Design makes it possible to reduce the height profile design and let in 10% more light into the room compared to conventional windows. And this means more joy and well-being!
The sophisticated, elegant design of DELIGHT-Design windows successfully harmonizes with their ability to reliably conserve heat even in severe frosts, which means that you do not have to heat the street at your own expense. The windows are given a special sophistication by the new figured sash and decorative glazing bead with elegant relief.10% MORE LIGHT
Description
DELIGHT-DESIGN: HARMONY OF LIGHT AND STYLE
The know-how of the DELIGHT-Design technical solution allows you to shorten the frame and sash and let 10% more light into the house compared to traditional systems. In addition, the DELIGHT-Design system provides an excellent opportunity to improvise and meet your individual window design wishes. The designer door is distinguished by noble proportions, roundness of shapes and graceful relief of the decorative bead.
MAIN SYSTEM FEATURES:
- System depth / number of chambers: 70 mm / 5 chambers.
- Exceptionally high thermal insulation value: rdef=0.8 m2 s/W.
- Burglary safety: installation of reinforced locking devices due to a 13 mm offset of the axis of the device groove.
- Air and water tightness: reliable protection from drafts, dust and water thanks to two sealing contours (seal overlap 7/8 mm outside/inside).
- Surface: high quality, perfectly smooth, easy to clean.
Advantages
WARM AND COMFORTABLE
Increasing the area of translucent filling window design of the Delight-Design profiles does not come at the expense of others functional characteristics. The depth of 70 mm, the five-chamber profile structure and the ability to install double-glazed windows up to 41 mm thick reliably retain heat inside the house.
10% MORE LIGHT
Windows from profile system Delight-Design are increasingly in demand in the private market due to their special sophistication, aesthetic appeal and the ability to make the room brighter. They correspond to the general trend towards increasing the translucent part of the window: in our climate zone with a small amount On sunny days, people want to fill their home with light as much as possible.
Application area
CONSTRUCTION SOLUTIONS
Windows made from REHAU DELIGHT-Design profiles are used in high-rise and private suburban construction. They are suitable for the construction of new buildings and renovation of existing ones.
The REHAU DELIGHT-Design window system allows you to meet high demands on thermal insulation, design and natural light.
The REHAU company produces several collections of profiles for plastic windows, each of which is aimed at meeting specific customer needs and solving different types problems. Thus, REHAU DELIGHT Design plastic windows help make the room noticeably brighter - the results show that they transmit 10% more sunlight. This became possible thanks to a reduction in the profile height and transformation of the frame shape: it is noticeably narrower, devoid of sharp corners, and looks softer and more elegant. The changes did not in any way affect the technical performance of the window: it perfectly retains heat and protects against noise.
Profile technical characteristics
Plastic windows REHAU DELIGHT design is an example of how you can successfully combine current design and manufacturability of window systems:
- a design with a narrower frame lets in 10% more light and at first glance seems very light;
- a noticeable feature of the design is the presence of decorative plastic glazing beads, which make the windows less urban, and more comfortable and homely;
- production technology allows the profile to be used for glazing rectangular, arched, and round window openings;
- the narrowing of the frame did not affect the thermal insulation performance and sound insulation properties - the profile reduces even the loudest sounds to 36 dB, its heat transfer coefficient is 0.8 sq.m/W;
- the REHAU DELIGHT window profile has an installation thickness of 70 mm and is equipped with a five-chamber double-glazed window, the price of which may vary depending on the thickness of the glass and additional protective options;
- steel reinforcement of the profile makes it more resistant to wind loads;
- the surface of the plastic is perfectly smooth, practically without pores, and therefore perfectly withstands any negative factors external environment;
- The window can be painted in any color according to the catalog and anti-burglary mechanisms can be installed.
Plastic window systems based on this profile are universal, suitable for all operating conditions, but especially for houses and apartments with small window openings or their orientation predominantly to the north side.
Premium German brand on the Russian market since 1995. With us you get the real thing German quality from a company with 48 years of history around the world.
- ALL profile systems of the highest class “A”
- ALL are made frost-resistant and marked with the letter “M”
- ALL have maximum 4-sided steel reinforcement
- Uniform quality standard regardless of country of production
The more air chambers, the less air exchange and, accordingly, the higher the thermal insulation.
The wider the profile and the greater the installation depth, the higher the thermal insulation.
Profiles ONLY of the highest class “A”
According to the thickness of the internal walls, ALL of our profiles are of the highest class “A” - the thickness of their front wall is at least 3 mm.
- class “A”: front wall not less than 3.0 mm
- class “B”: front wall not less than 2.5 mm
- class “C”: wall thickness is not standardized
Please note that 80-90% of the Russian market are classes “B” and “C” and only 10-20% are class “A” profiles. At the same time, our assortment includes ONLY class “A” profiles.
We fundamentally DO NOT use profile systems of classes “B” and “C” (with a front wall width of less than 3.0 mm).
ONLY frost-resistant profiles
According to GOST 30673-99 “PVC profiles for window and door units” for resistance to climatic influences, ALL of our profiles are “frost-resistant” - for areas with an AVERAGE monthly air temperature in January BELOW minus 20°C.
GOST standards for different classes:
- normal version “N”: the average temperature in January is minus 20°C and above
- frost-resistant version “M”: the average temperature in January is lower than minus 20°C
Our assortment includes ONLY frost-resistant profile systems marked with the letter “M”.
Heat transfer resistance (thermal thermal resistance) is the main thermal insulation coefficient. Determined by the ratio of the temperature difference between outside and inside the room to heat flow passing through the window. The higher this number, the better efficiency thermal insulation.
Evolutionary double-glazed windows SmartGlass 2.0
Our multifunctional double-glazed windows work for you both in winter and summer. In winter, spraying silver particles retains up to 90% of thermal energy heating devices, and in summer the double-glazed window reflects 25% more solar heat than conventional plastic windows.
- by 42% more HEAT in winter (energy saving properties)
- 25% less HEAT in summer (sun protection properties)
All our double-glazed windows contain special energy-efficient glass. We DO NOT use regular glass even in the most basic configurations.
AirDrive I, II and III climate control systems
Optimal ventilation mechanisms are built into the windows - the sashes open slightly by 1-5 mm, depending on the selected mode. These are NOT external devices (combs or valves), but BUILT-IN ventilation fittings.
Three options:
- AirDrive I: slot ventilation (1 mode)
- AirDrive II: discrete multi-stage ventilation (3 modes)
- AirDrive III: discrete multi-stage ventilation (5 modes)
We try not to place combs based on their appearance (only at your request). In principle, we do not use valves due to the fact that they violate the integrity of the window, reduce its tightness and strength (since the profile and its reinforcement are drilled through).
The Delight-Design system is the most affordable five-chamber profile Rehau with a depth of 70 mm, exceeding GOST requirements for thermal insulation by more than 70%.
Delight-Design is Rehau's most modern profile system. Complex innovative solutions allowed to produce products with best ratio prices and quality.
The Rehau Delight profile has high thermal insulation - 0.8 m²C/W. The system allows you to install a double-glazed window with a depth of 41 mm, which allows you to provide the highest class of sound insulation.
Features of Rehau Delight
Rehau Delight has the minimum frame profile height among analogues with standard reinforcement (35x20 mm), which allows the installation of double-glazed windows larger area. This feature allows you to increase the light transmission of the window by 10%.
New design of Rehau Delight
The Rehau Delight profile is offered with two types of doors: in the traditional design Z57 - with inclined end edges and in the new design Z53 - with a semicircular overlay. The height of the frame + semicircular sash combination Z53 is lower than the option with a traditional sash, which makes the design of the Rehau Delight window more lightweight.
It is possible to install two types of glazing beads in the sashes: semicircular and figured. This solution allows you to coordinate the design style with the interior design. Designer beads with a depth of 14.5 mm limit the depth of the glass unit to no more than 32 mm.
Prices for plastic windows Rehau Delight
The know-how of the Delight-Design technical solution allows you to shorten the frame and sash and let 10% more light into the house compared to traditional systems. In addition, the Delight-Design system provides an excellent opportunity to improvise and meet your individual window design wishes. The designer door is distinguished by noble proportions, roundness of shapes and graceful relief of the decorative bead.
Price of Rehau Delight-Design windows from 3750 RUR/m2
Technical characteristics of Rehau Delight
| Profile thickness, mm | |
|---|---|
| Number of cameras | |
| Thermal insulation |
0.8 m 2 °C/W. |
| Glass unit thickness, mm | |
| Profile color in bulk |
|
| Profile lamination |
Available in RENOLIT colors |
| Color sealing rubber |
|
| Beading bead with single-chamber glass unit 32 mm: |
Beveled Rounded Figured |
| Beading bead with two-chamber glass unit 40 mm: |
Beveled |
Advantages of the Rehau Delight-Design window profile:
- In warmth and comfort. Increasing the area of translucent filling of a window structure made from Delight profiles does not come at the expense of its other functional characteristics. The depth of 70 mm, the five-chamber profile structure and the ability to install double-glazed windows up to 41 mm thick reliably retain heat inside the house.
- 10% more light. Windows from the Delight-Design profile system are in increasing demand in the private customer market due to their special sophistication, aesthetic appeal and the ability to make the room brighter. They respond to the general trend towards increasing the translucent part of the window: in our climate zone with a small number of sunny days, people want to fill their home with light as much as possible.
- Any shape. Elegant appearance and big architectural possibilities for the manufacture of structures various forms and sizes.
- Hacking protection. Shifting the axis of the instrument groove by 13 mm allows the installation of devices of a reinforced locking system.
- Airtightness and moisture resistance. Two sealing contours 7-8 mm thick inside and outside.
- Flawless surface. Ideally smooth, requiring no special care.
Possibilities
System Rehau profiles Delight-Design is suitable for construction and reconstruction work in apartment buildings and private buildings, including suburban construction.
Single sash window
height - 1415, width - 900 
10290 rub.
Price 7350 rub.
"Turnkey" - 11,495 RUR
Double sash window
height - 1415, width - 1450 
14392 rub.
Price 10280 rub.
"Turnkey" - 15528 RUR
If you want to buy Rehau plastic windows in Moscow, my advice is definitely RAMokna! I want to note high level service at all stages. During our first telephone conversation, manager Olga clarified the details and spoke in detail about each type of profile. In the end I chose Rehau. Next, a surveyor arrived who took into account all my wishes (I wanted to widen the opening a little). And the work of the installers is beyond praise. Fast, neat, with a minimum of dust...
Stepanova M.A.
Choosing a profile is not an easy task. I looked at many websites, weighed all the pros and cons, and ultimately decided to order Rehau windows. They are perfectly adapted to our climate and are reliable in operation. As for the price, this is where it turned out to be the cheapest, plus the installers took out the old frames, collected the garbage and swept the room. I am delighted! I would like to express my sincere gratitude to the team of the Ramokna company. Thank you!
Konstantin Evgenievich
Rehau plastic windows have proven themselves to be excellent, they have been serving faithfully for more than ten years, they have never even been adjusted. At the beginning of summer, my wife and I went to order windows for country house, and of course the choice was obvious. And besides, the official Rehau dealer in Moscow is located just two blocks from our house. This is our second purchase from FRAMEWORK. And we advise you!
