How to cut laminate flooring with a hand circular saw. What is the best way to cut laminate flooring at home? Professional tools: cutter

By appearance laminate resembles natural wood, although high-strength fiberboard with decorative finishing is used for its manufacture.

Important! In the production of laminate, four-layer technology is used; on the top there is a protective film that protects it from mechanical damage and wear.

Laying laminate flooring is quite simple, like any other flooring, it requires sawing and preparation for installation. If you are new to this business, then you may have problems choosing the right tool. To learn about the technology of sawing laminate using a special tool without chips and scratches, you should read the information below.

Laminate classification

Jigsaw for cutting

An electric jigsaw is often used to cut laminate flooring; it is a popular and versatile tool that requires certain skills to operate. The laminate board will not deform if operated at high rotation speeds. Therefore, for high-quality sawing of laminate, you should choose a jigsaw where you can adjust the speed, most often this is done using a button. To properly cut laminate using an electric jigsaw, it is necessary to carry out preparatory measures:

On the outside of the laminate board, using a pencil or marker, a mark is made along which the cut will be made;
It is necessary to draw along the same line with a knife or other sharp object and apply some force;
Lay the laminate board on a flat surface and fix it in a stationary state.

The mark is made with a knife or other sharp object so that the jigsaw does not damage the coating, and the cut is smooth and correct in accordance with the applied markings. Before sawing, the laminate board is placed in such a state that the edge that needs to be cut is suspended. Next, sawing is carried out along the intended line. You need to choose the right saw for sawing electric jigsaw, in a special store you can find saws for working with wood and special attachments designed for sawing laminate boards.

If straight cutting is required, you can use a wide nozzle. For more complex sawing, it is better to use a fine-toothed attachment. The blade of such a nozzle should be narrow, this will avoid cracks and chips in the process of sawing the laminate board.

The beauty of curly cuts is achieved when using a narrow nozzle with small teeth, while when using a wide nozzle it will be difficult to carry out turning movements and the figures may be cut out not according to the markings, but with some deviation. Pay attention to the availability of saws with reverse teeth in a specialized store; they are just suitable for accurately and quickly sawing laminate boards.

Circular saw for cutting laminate boards

A circular saw can be used to cut laminate boards, although it is not the optimal tool to perform this operation. If you have not previously worked with a circular saw, then it is better to abandon the idea of sawing laminate boards when using this tool. Most often, a circular saw is used to cut laminate boards lengthwise.

If you need to cut a saw along the entire length of a laminate board, then this tool comes in handy. However, when working with a circular saw when cutting laminate, you may encounter a problem unpleasant odor, this occurs due to the high speed of rotation of the disk, which, when heated, begins to burn out the wood. To properly cut laminate boards using a circular saw, you should use a fine-toothed blade.

Grinder for performing laminate sawing operations

If you have a grinder at hand, then it is also quite suitable for cutting laminate boards. You just need to choose a disc designed for working with ceramics or concrete. Using a grinder, the laminate is cut according to outside, this method allows you to avoid the appearance of chips and cracks. You should pay attention to the fact that when working with an angle grinder, a lot of fumes and dust are released; you can protect objects in the house with the help of film.

Hacksaw for cutting laminate

A hacksaw is not a leader in the ranking of tools for cutting laminate boards. But if this is the only tool at hand, certain rules will help you cope with the sawing task. Do not use a hacksaw with large teeth; it will damage the surface and will not allow you to make an accurate cut. It is recommended to use a hacksaw with fine teeth and first mark with a pencil and a sharp object along the cut line. But when working with a regular hacksaw, you don’t have to rely on high speed. A hacksaw is best suited for making small cuts and cross cuts. This tool is not suitable for cutting along the entire length of a laminate board.

Cutter for cutting

The cutter is used quite often in laminate sawing, since guillotines operate on the principle of a burner, as a result, it is possible to create a cut faster. When using this tool, the cut is smooth. It is convenient to work with such a tool because it does not generate dust and does not make noise. The cutter is designed in such a way that it is only suitable for cross cuts, so the scope of this tool is limited.

In order for the laminate flooring to be complete, it is laid in staggered patterns, similar to brickwork, although, however, it will not be possible to do without cutting the material. Cutting laminate planks is quite a responsible task, so before cutting the laminate, you need to figure out how and with what tools you can carry out this procedure.

The most common methods and means for cutting laminate

Laminate flooring must be trimmed in such a way that the cut is smooth, straight and without damage to the edge. For these purposes, a number of special devices and machines are used, which we will discuss further.

Cutting with saws

Let's look at how to cut laminate flooring at home with your own hands using various types of saws:

Laminate, unlike chipboard and others wood materials, quite easy to manual cutting with a hacksaw.
Any saw can be used, but the main requirement for it is the presence of a small tooth. This is necessary to ensure that there are no burrs on the edges of the cut.
In any case, even if there is slight damage to the edge at the end, it will be hidden under and invisible to the eye.
Before cutting the laminate, it must be properly marked, measuring the required length and marking the line of the future cut on the bar.
Laminate cutting hand hacksaw involves positioning the strip to be shortened horizontally so that its front side is directed upward. This will allow you to get more quality edge from the front side.
Among other things, you should avoid applying excessive pressure on the saw during the cutting process to avoid breaking the finished edge of the laminated plank.

Cutting with a jigsaw

This is perhaps the most convenient and quick way cutting laminate, because manual method still quite labor intensive. Therefore, if in your household We still don’t have a jigsaw, we recommend that you purchase one. The price of this tool, fortunately, is not prohibitive.

Let's look at how to cut laminate using a jigsaw:

Before cutting laminate, the jigsaw must be equipped with a blade with a fine reverse tooth. As a rule, it is included in the original jigsaw kit, but if there is no such blade, it should be purchased separately.
After preparing the jigsaw, they also mark the strip to be cut. This should be done on the back (non-front) side of the laminate strip.
Next, lay it on a rigid base and fix it, this time face down, after which the cut is carefully made precisely along the intended line.

Cutting with a circular saw

Use circular saw Not everyone can afford to cut laminate, but for those who have it at their disposal, the cutting process will be simple and enjoyable.

Instructions for using a circular saw to cut laminate are as follows:

As with the previous options, it will be better if the circular saw blade has fine teeth.
Cut lines are applied to the laminate strips to be sawed (on their front side).
Then, alternately position the planks horizontally and upward with a pattern on the machine and, holding the plank by the edges with your hands, slowly push the plank away from you in the direction of the rotating blade.

Advice! When using a laminate circular cutter, extreme care must be taken to avoid injury to your hands. The canvas must be covered with a special casing, and the sleeves outerwear the worker must be fastened.

How else can you cut laminate?

How do professionals cut laminate flooring? They usually use a special laminate cutting machine. The machine design is equipped sharp blade, driven by a handle.

This laminate cutting tool works according to the following scheme:

A laminate strip is placed on the machine support in a horizontal position.
Adjust the markings on the bar to fit the knife.
Lower the handle of the machine in the direction of the laminate, obtaining a straight and even cut using the knife.

This machine allows you to cut large volumes of material quickly and not depend on the availability of a power source. This is an almost irreplaceable tool that is available to every craftsman who installs floor coverings professionally.

In any case, no matter what device you use for cutting laminate, you need to correctly calculate the forces during the cutting process and not use unnecessary force when pressing the saw on the laminate or vice versa. Excessive pressure will result in cracks and chips appearing on the laminate.

Advice! The key to a minimum amount of defects during installation of the coating will be the correct calculation and marking of the laminate for cutting.

Tool requirements

have a compact size;
be light in weight;
be easy to use;

hacksaw;
cutter;
circular saw;
jigsaw

Hacksaw

The laminate should be marked before cutting. Before sawing the laminate, the required length is measured on the panel and a cutting line is drawn. To obtain a better edge, file the bottom layer from the reverse side

Electric jigsaw

Professional cutter

The tool works without noise and dust. The device allows you to cut laminate quickly and efficiently. The operating principle of the cutter is similar to that of a guillotine.

How to cut laminated chipboard without chipping

The blade of the knife is lowered onto the panel using the handle, cutting off the excess in one motion. The cut is perfectly smooth.

A circular saw

Formation of dust and noise;
. the smell of burnt wood;
. presence of skill.

When using any tool to cut laminate, it is important to correctly calculate the force applied.

Excessive pressure can lead to the formation of cracks or chips on the surface of the panel. Competent calculation required quantity material will allow you to cut the laminate with minimal waste.

Boards and timber are one of the main building materials. But not everyone has the financial means to purchase ready-made boards. In such situations, one of the solutions is to independently harvest wood on a plot taken from the forestry.

The advantage of a chainsaw as a tool for sawing logs

You can saw a log using a sawmill, gas or electric saw and additional accessories. When choosing one of these tools, you should consider the amount of work ahead. The cost of the cheapest stationary sawmill along with all components is 150 thousand rubles. A chainsaw is much cheaper. It is more convenient than an electric saw for the following reasons:

Electricity is not required to operate the tool - this makes it possible to use a chainsaw on plots.
It is more powerful compared to an electric saw.
It starts smoothly and allows you to conveniently adjust the speed, which reduces the likelihood of a chain break.
The inertial brake operates faster than that of an electric saw.
Long working time without interruption – up to one hour.
Can be used in conditions of high humidity.

Types of working attachments

When sawing logs with a chainsaw, various attachments are used.

Nozzle for longitudinal sawing. It is used for sawing logs lengthwise, the process takes place in a horizontal position. After work, the master receives the same thickness of the product. Finished materials are subjected to a drying process, after which the boards are used in construction.
How to cut laminate

In appearance, the device is a frame small sizes, it is attached to the tire on each side.

Drum debarker (debarker). With the help of such an attachment it is easy to dissolve the log; it works due to V-belt transmission. Attached to belts on both sides, special pulleys are used for this. The speed of rotation of the shaft depends on the size of the pulleys, so the performance of the attachment is easy to change. This technology forces the master to carefully monitor each stage of the process; some specialists use an assistant during this cutting. But this option requires increased security measures.
Sawing with a lightweight nozzle. The method is no different high performance, but is used quite often. The element is fastened on one side, but the workpieces are slightly uneven. Such materials are necessary for the construction of sheds or fences.

Features of sawing using a homemade tool

You can easily saw a log into boards using a self-made tool. It's easy to make. To do this you need to do the following:

As a support, you need to use a frame from a school desk or a pipe with a cross-section in the form of a square, its optimal size is 20x20, more is allowed.
It is necessary to build two clamps, mount a cross member with two holes for coupling bolts at one end, and make a protrusion for the tire in the middle.
To cut logs longitudinally into boards, you need to make a support frame; its width should be seven to eight centimeters less than the length.
Then two parts ten centimeters long are welded to both sides, holes are made for the bolts, and a handle is attached in the middle for ease of operation.
Then you need to insert the clamps into the grooves, install the tire, and secure everything carefully.

To Work with homemade instrument It’s not difficult, for this you will need goats, they will serve as a support. In addition, you need to prepare a metal strip or board to use as a guide. A log is placed underneath and the required height for work is set.

The procedure for performing preparatory work

To cut a log lengthwise, you need to perform the following sequence of actions:

Take two straight boards and attach one to the other at right angles. The result is a strong guide line.
To support the manufactured ruler, you need to make stops from boards.
Moving the trunks must be done using a tilter.
The log should be placed on a comfortable base.
You need to secure the frame to the chainsaw bar using nuts.
The supports of the leading ruler must be attached to the ends of the log, checking the horizontal position with a level.
Self-tapping screws must be used to secure all brackets and structural elements. Nails are not suitable for these purposes, since they are difficult to remove in the future without causing damage to the structural parts.
The leading ruler needs to be attached to the supports using brackets and its height adjusted taking into account that the cut will not go along it, but approximately one centimeter higher.
The log needs to be rotated and the second board secured so that it rests on the ground and supports the log.

Procedure for performing basic work

Now you need to start the chainsaw and make the first cut.
Next, you need to free the log from the stops and boards and attach a guide ruler to the cut surface of the log in the direction of the next cut. The ruler is attached directly to the surface or to the ends of the log using supports. The second cut is made perpendicular to the first cut.
The log needs to be turned and secured with a board against the ground.
A ruler is not required to perform the following steps. One of the cut sides serves as a guide.
It is necessary to adjust the thickness of the cut on the frame and saw off the log from the other side so that you get a beam with bark remaining on only one side.
This beam must be turned over and secured so that the attachment point of the fixing board is as low as possible.
Then you need to adjust the frame to the required thickness of the board and saw the timber into boards.

Safety rules when performing work

Should not be used circular saw without protective casing.
It is necessary to wear headphones, gloves, glasses, thick clothing and a respirator.
Do not pour fuel into hot tank tool, you need to wait until it cools down.
Children should not be allowed to be present at the work site.
It is necessary to start the tool on the ground with the chain brake engaged, which must be released only before starting to cut.
You should always have a first aid kit on hand.
When working, you need to hold the chainsaw by the arc handle, moving it forward along the guide. You should not put too much pressure on the chainsaw - it should move freely.
Right-handed people should position the log with right side from yourself, for left-handed people - from the left.

Instagram

The choice of flooring is largely determined by quality and price. In this regard, laminate has the most acceptable ratio. The material owes its popularity not only to practicality, but also to ease of installation. If you have the tools, anyone can install flooring. Accordingly, the question arises - how to cut laminate?

Tool requirements

To lay the flooring, the material must be taken 10-15% more than the area of the room. The panels will need to not only be joined, but also cut. To adjust the dimensions, use manual or electric tool. When used at home it should:

have a compact size;
be light in weight;
be easy to use;
make an even cut without chipping.

The last characteristic is key for many repair enthusiasts when choosing a method. But its importance is somewhat exaggerated. The presence of chips up to 5 millimeters will hide the baseboard.

Both specialists and home craftsmen use:

hacksaw;
cutter;
circular saw;
jigsaw

Hacksaw

Since the material consists of sawdust, it is quite easy to saw by hand. Use hacksaws for wood or metal. It is important that the hacksaw has small, sharp teeth. This will allow you to cut the panels without chipping or scoring. In case of minor damage to the edges, the ends will be covered by the plinth.

The laminate should be marked before cutting.

How to cut laminate?

Before sawing the laminate, the required length is measured on the panel and a cutting line is drawn. To obtain a better edge, file the bottom layer from the reverse side

Electric jigsaw

Everyone determines what to use to cut laminate based on the availability of tools. But, if there are no devices, the most practical would be to purchase a jigsaw. It will allow you to cut panels in all directions, including various shapes. A jigsaw is lighter than a circular saw, smaller in size than a cutter, more convenient and faster than a hacksaw. Anyone can master a jigsaw, since it does not require special skills.

For a high-quality cut, it is necessary that the jigsaw file have the teeth in the opposite direction. Usually a blade for cutting laminate is included in the kit. To avoid defects, markings are applied with reverse side panels. Protective film better to prune stationery knife. The board is fixed face down and sawed off.

How to cut laminate flooring with a jigsaw without chipping:

An electric jigsaw will allow you to cut laminate flooring with a minimum amount of dust. The jigsaw has a special container bag for collecting sawdust. For curly carving, narrower blades should be used. And glued before sawing on the front part of the panel masking tape, is guaranteed to get rid of chips.

Professional cutter

The tool works without noise and dust. The device allows you to cut laminate quickly and efficiently. The operating principle of the cutter is similar to that of a guillotine. The knife blade is lowered onto the panel using the handle, cutting off the excess in one motion. The cut is perfectly smooth.

Using the cutter does not require effort or skill, which allows you to lay large areas floor covering. The cutter is especially in demand among professional repair teams and perfectionists. The disadvantages of the device are high cost and limited cutting, because cutting can only be done across the panel.

A circular saw

Even though laminate flooring is easy to saw by hand, using a power tool makes the task much easier. Sometimes a hand-held circular saw is used for these purposes. Like a hacksaw, use blades with fine teeth. Before sawing the laminate, markings are applied to its reverse side, since the movement of the disc occurs from bottom to top. The board is securely fastened to a workbench or table, leaving the cut part hanging. Then the unnecessary piece is smoothly sawed off along the marking line.

When using a grinder, the laminate is placed face up, since the movement of the teeth occurs from top to bottom. This will prevent the appearance of cracks and chips. Which side to cut the laminate from determines the direction of movement of the teeth. Disadvantages of cutting with a circular saw include:

Formation of dust and noise;
. the smell of burnt wood;
. presence of skill.

When using any tool to cut laminate, it is important to correctly calculate the force applied. Excessive pressure can lead to the formation of cracks or chips on the surface of the panel. Proper calculation of the required amount of material will allow you to cut the laminate with minimal waste.

How to properly cut laminate, watch the video:

About choosing a tool
Knife
Hacksaw for metal
Jigsaw
A circular saw
What does a professional use?

Laminate is a floor covering that is increasingly found in every home. Its installation always requires adjustment in length and width, because the slats should be laid in accordance with the rule brickwork. Accordingly, this brings up the question: “How to cut laminate flooring at home?”

What you need to know about a jigsaw and file for high-quality cutting of laminate

From this article you will learn about different instruments and methods of adjustment using them.

About choosing a tool

Knife

Hacksaw for metal

Jigsaw

Draw the lamella.

A circular saw

What does a professional use?

Operating principle of the machine:

Conclusion

About choosing a tool
Knife
Hacksaw for metal
Jigsaw
A circular saw
What does a professional use?

About choosing a tool

Laminate cutting must be done well so that the cut line is straight and even and the edge remains intact. All these points are quite easy to accomplish by choosing the appropriate tool for cutting laminate. Example the right choice may be due to the fact that not every person can handle a professional tool, so he should use more simple tools, with whom he will do this work more carefully.

Knife

The simplest tool that absolutely everyone has, but it is not the best solution. A laminate knife is only suitable if you want to make a small cutout for a ledge in the wall. While it is still possible to cut the lamella across, it is almost impossible to do it lengthwise, because you will spend a lot of time and effort, and the cut will turn out to be of poor quality and crooked.

If you decide to use a knife, check its sharpness, because with a dull sheath you will make much more mistakes in your work than with a sharp one.

How and with what to cut laminate flooring - choosing a tool and the nuances of sawing laminated flooring

Hacksaw for metal

A hacksaw for metal is something that will be beneficial for cutting laminate flooring, because the tool is one of those that is found in almost every home and you don’t have to run to the store.

A hacksaw for metal is very convenient for making small cuts due to the fact that:

Laminate can be easily cut by hand;
The fine tooth of the hacksaw ensures no chipping;
If you do damage the edge, you can easily cover the defects with plinth.

Remember that a hacksaw for laminate is only suitable if the amount of work is small and there is no other tool at hand; also, if you do not have a hacksaw on hand, it is better to buy a jigsaw from the store, which will be mentioned below.

Sawing should be carried out according to the following instructions:

First, make clear markings on the lamella, remembering that it should be bright, because when sawing it will become covered thin layer dust.
To get a quality edge, saw the sheet with its face up.
Do not apply much force to the tool so as not to damage the edge being finished.

Jigsaw

This is a more expensive tool, but choosing it is the best answer to the question of what is best for cutting laminate flooring. A jigsaw is worth buying only if the amount of work is too large to cut everything by hand, or if you don’t mind spending money on purchasing it.

How to cut laminate flooring with a jigsaw:

Install a reverse blade into the jigsaw small tooth. If the blade comes with an expensive and high-quality tool, then you can use it, otherwise purchase it separately.
Draw the lamella.
IN in this case, the lamellas must be sawed, placing them face down and secured to a hard surface.

Another advantage of a jigsaw is that it can cut not only in a straight line.

A circular saw

A circular saw is not something you can use to cut laminate at any time, however, if you are the happy owner of such equipment, then feel free to start sawing:

Place a fine-toothed disc onto the shaft.
Draw a cutting line on the slats.
If the cut is made along the plank, then set the width on the machine.
Saw the lamella by pushing in front of you.

The main advantage of a circular saw is its speed, which allows you to cut a lamella lengthwise in a matter of seconds, however, due to the dimensions that you can see in the photo, it is rarely used, in addition, you cannot cut certain pieces of laminate with it, for example, under a column or ledge in a wall.

What does a professional use?

In any business, it is easy to distinguish an amateur from a professional, not only looking at the speed and quality of work, but also the tool used. The same thing happens with laying laminate flooring. Professionals use a laminate cutter, with which they make cuts in a very short period of time.

As you can see in the photo, this cutter is manual machine, equipped with a sharp blade, which is fixed to the base. The blade is easily adjustable different types cuts. Using the machine, you can cut lamellas along, across and at various angles, without spending much effort and electricity.

Operating principle of the machine:

The lamella is placed on the machine support in a horizontal position.
The cutter adjusts to the markings.
The builder applies force to the handle and the blade gradually cuts the lamella.

A professional machine makes it very easy to cut laminate without chipping, so everyone who lays laminate tries to purchase one.

Conclusion

You can use any of the tools presented, but remember that the most important thing in cutting laminate is the quality of the edge. Remember the advice: to make as few chips and irregularities as possible, do not apply much force to the sawing tool, because this will cause the tool to pull out fragments from the body of the material rather than cut them out.

Now you know all the cutting methods, so you can decide for yourself the question of how to cut laminate flooring.

About choosing a tool
Knife
Hacksaw for metal
Jigsaw
A circular saw
What does a professional use?

Laminate is a floor covering that is increasingly found in every home. Its installation always requires adjustment in length and width, because the slats should be laid in accordance with the rules of brickwork. Accordingly, this brings up the question: “How to cut laminate flooring at home?” In this article you will learn about different tools and how to make adjustments using them.

About choosing a tool

Laminate cutting must be done well so that the cut line is straight and even and the edge remains intact. All these points are quite easy to accomplish by choosing the appropriate tool for cutting laminate. An example of the right choice is the fact that not every person can handle a professional tool, so he should use simpler tools with which he will do this work more accurately.

Knife

The simplest tool that absolutely everyone has, but it is not the best solution.

What is the best way to cut laminate?

A laminate knife is only suitable if you want to make a small cutout for a ledge in the wall. While it is still possible to cut the lamella across, it is almost impossible to do it lengthwise, because you will spend a lot of time and effort, and the cut will turn out to be of poor quality and crooked.

If you decide to use a knife, check its sharpness, because with a dull sheath you will make much more mistakes in your work than with a sharp one.

Hacksaw for metal

A hacksaw for metal is something that will be beneficial for cutting laminate flooring, because the tool is one of those that is found in almost every home and you don’t have to run to the store.

A hacksaw for metal is very convenient for making small cuts due to the fact that:

Laminate can be easily cut by hand;
The fine tooth of the hacksaw ensures no chipping;
If you do damage the edge, you can easily cover the defects with plinth.

Sawing should be carried out according to the following instructions:

First, make clear markings on the lamella, remembering that it should be bright, because when sawing it will be covered with a thin layer of dust.
To get a quality edge, saw the sheet with its face up.
Do not apply much force to the tool so as not to damage the edge being finished.

Jigsaw

How to cut laminate flooring with a jigsaw:

Install a reverse fine tooth blade into the jigsaw. If the blade comes with an expensive and high-quality tool, then you can use it, otherwise purchase it separately.
Draw the lamella.
In this case, the lamellas need to be sawn, placed face down and secured to a hard surface.

Another advantage of a jigsaw is that it can cut not only in a straight line.

A circular saw

A circular saw is not something you can use to cut laminate at any time, however, if you are the happy owner of such equipment, then feel free to start sawing:

Place a fine-toothed disc onto the shaft.
Draw a cutting line on the slats.
If the cut is made along the plank, then set the width on the machine.
Saw the lamella by pushing in front of you.

What does a professional use?

As you can see in the photo, this cutter is a manual machine equipped with a sharp blade, which is fixed to the base. The blade is easily adjustable for different types of cuts. Using the machine, you can cut lamellas along, across and at various angles, without spending much effort and electricity.

Operating principle of the machine:

The lamella is placed on the machine support in a horizontal position.
The cutter adjusts to the markings.
The builder applies force to the handle and the blade gradually cuts the lamella.

A professional machine makes it very easy to cut laminate without chipping, so everyone who lays laminate tries to purchase one.

Conclusion

Now you know all the cutting methods, so you can decide for yourself the question of how to cut laminate flooring.

They allow you to create an original look for the floor in any room. The slats are presented on the market with various patterns that imitate not only the traditional texture of wood, but also stone, metal and leather. That is, in terms of stylistic diversity, this material surpasses even natural parquet. It would seem that in terms of installation, the slats require much less effort, but this is not the case. Simple typical installation may become more complex if non-standard deck formation configurations arise. In such cases, the question arises about what to use to cut the laminate. Fortunately, to solve this problem specialized tool not required. You can limit yourself to the usual equipment, which is likely to be found in the households of many home craftsmen.

Hacksaw as the most affordable option

If there is not much work, and we are not talking about obtaining an ultra-precise cutting result, then you can limit yourself to using the simplest tool - a hacksaw. During the cutting process, the main thing is to ensure, if possible, the integrity and evenness of the edge, as well as to maintain the correctness of the cutting line. In this matter, much will depend on the quality and sharpness of the saw itself. But this option will not work if the question is about how to cut the laminate in large quantities. Technically, the hacksaw effectively copes with wood-based materials, which include laminated panels. And with its help, it is quite possible to cope with a whole batch of material, even alone. But the problem is that maintaining more or less decent cut quality throughout the entire process will be very difficult.

Cutting with a grinder

You could say this is the opposite of the previous tool. If you equip your angle grinder with a high-quality cutting wheel, you can get not only a productive, but also a neat assistant. But cutting laminate flooring with a grinder without experience is still not recommended. There is nothing particularly difficult in handling angle grinders, but at least before work you should practice on rough panels. As for the equipment itself, experienced parquet floorers recommend using a wheel with 48 teeth in a 160 mm format. This cutter will allow you to perform serial cutting, which is useful not only as a way to save time, but also from the point of view of maintaining straight edges - at least, the cleanliness of the cut will be ensured in the lamellas placed in the middle of the batch being opened. By the way, to obtain a 100% accurate cut, you can install the same rough elements in place of the outer panels.

Cut with a jigsaw

If with an angle grinder you still have to resort to some tricks to achieve the cleanest result, then in the case of this it is not necessary. Even when working with piece cutting, this tool will achieve impressive results. An example of working with a jigsaw also shows the depth of the question regarding what is used to cut laminate, if you need to get a figured cutting. Of course, making a straight cut is the most common operation. But non-standard installation, which involves installation with curved panels, is also practiced. Another thing is that the implementation of this method can be trusted to professional parquet floorers. The advantage of a jigsaw is precisely that a model suitable for its characteristics, even in the hands of a beginner in such work, can provide a very decent result. To do this, you should initially purchase a multifunctional device, the design and saw blade of which allow for figured cutting.

Using a circular saw for cutting

The advantages of this tool include high cutting speed and the ability to work with several panels at the same time. It has already been noted that the grinder has similar performance, but the circular grinder also has serious features. Its cutting power is much higher, so if you are thinking about the best way to cut laminate from commercial or semi-commercial series, then there is no better way to find this method. Such panels are characterized by high strength, hardness and rigidity. Therefore, even in piece processing, not every jigsaw or hacksaw can cope with this task. will undoubtedly perform batch cutting, but not as quickly and efficiently as

Guillotine cutting for laminate

This method can be called optimal for the average home craftsman who plans to decorate one or more rooms in the house with laminated floor covering. The guillotine for lamellas is a special cutter, the design of which is designed not only to directly provide an effective mechanical effect on the material, but also to provide user convenience. To understand this in everyday life, it is first of all worth considering this tool. Unlike a hacksaw, it performs the operation faster and more accurately, and compared to powerful grinders and circular machines It costs much less and requires an order of magnitude less hassle to maintain.

Features of cutting vinyl laminate

If commercial panels are characterized by high strength, then vinyl material, on the contrary, is produced with the expectation of creating an original decorative effect. In addition, vinyl makes cleaning the floor easier, which is why housewives appreciate it. Such lamellas are also convenient for cutting. It's usually relative soft material, which can be cut hand tools. So, how to cut vinyl laminate? It’s probably not worth using these remedies. It is more advisable to use a stationery knife, which has a high cutting ability, almost like a blade. Soft vinyl panels are sensitive to mechanical stress, so a sharp knife will become more good choice than a rough angle grinder or hacksaw.

How to choose the optimal tool?

The choice should be guided by two groups of factors. Firstly, on the characteristics of the material, installation conditions and volumes of work. Secondly, on the parameters of the tool itself. For example, how to cut laminate flooring at home? In this case, there is no point in equipping yourself with productive electrical equipment, since a small volume of panels for household installation can be processed efficiently by a guillotine and a hacksaw. If you plan to decorate a huge office area using a wear-resistant laminate model, then a circular saw or grinder would be a good choice.

How to cut laminate correctly?

Even if the right tool was selected for specific tasks, this does not mean that obtaining a high-quality result is a foregone conclusion. Much depends on the cutting technique. First of all, the surface of the lamellas is cleaned of dirt and dust, and the tool is prepared for use. It is especially important to select the appropriate accessories for an angle grinder and a circular saw. The work process itself must be carried out smoothly so that the edge is preserved in proper aesthetic condition. Moreover, each panel must be securely fixed during the cutting process, otherwise there will be a risk of uneven cutting.

It is quite possible to trim laminate flooring yourself, the main thing is to properly familiarize yourself with all the nuances of this process Laminate flooring looks very beautiful and is one of the most popular finishing materials however, it cannot be used for wall decoration. The peculiarity of the canvas is durability, affordability, original form, large assortment.

Conduct Finishing work You can do the cutting on the floor with your own hands and even without the help of a specialist. To ensure that the floor lies flat and there is no deformation or swelling of the covering, it is necessary to trim the board correctly and lay it flush against the wall. At home, it is much easier to cut soft vinyl laminate, which consists of only 2 layers and is a thin sheet.

This type of coating is better than the usual one, as it has excellent performance properties.

Wear resistance class 43;
Environmentally friendly;
Water resistance;
Quick styling.

An excellent tool for cutting laminate is a special guillotine

To cut such a laminate, you do not need a special tool and just a ruler, pencil and construction knife. A line for the future cut is drawn, then you need to draw a knife along it and bend the fabric. If necessary, make a shaped cut, you can use large scissors.

To cut a laminate board, you need to take accurate measurements, prepare tools, and follow safety precautions. It is especially important that the canvas needs to be cut so that there is no torn protruding part on the cutting line. In other words, there should be no visual damage. For quality cutting, can be used different kind tools. Most often, a saw is used to cut laminate flooring, which can be used at home.

Unlike materials such as chipboard, laminate is very easy to handle, and a hacksaw is suitable for this manual type.

There should be no rough burrs or other types of deformation on the edge, and to prevent their formation, it is best to use a file with fine teeth. If it happens that the coating is nevertheless deformed, then do not despair, since you just need to put the material on this side under the baseboard, and therefore it will not be noticeable. Before making a cut, you need to check several times to avoid inaccuracy, which will later become noticeable in the form of a hole on the floor sticking out from under the baseboard.

How and with what to cut laminate flooring at home

What is the easiest way to cut laminate? It must be neat, correct, thoughtful. The cutting can be done using a jigsaw, especially if it is an electric tool.

To cut laminate, many experts recommend using a jigsaw.

It is with a jigsaw that you can make a cut:

Fast;
Competently;
Purely.

An alternative could be a simple handsaw or hacksaw, but this process will take much longer. Due to the fact that the cost of such a product as a jigsaw is not too small, and laying the laminate is carried out quite rarely due to the long service life, it is not advisable to purchase it for personal use.

The method of cutting tiles with a jigsaw is unique and requires compliance with safety and operating rules. The laminate is cut with small teeth. This blade is included in the set of every jigsaw and, if necessary, you can buy an additional one.

You cannot work with a damaged blade, as it will not cut, but simply deform the board.

The cut is carried out according to pre-made markings. The markings should be on the back of the laminate. Next, cutting is carried out, but with the board carefully fixed, for which you can use a heavy object or even own hand. It is advisable to carry out the cutting with additional assistance.

Convenient laminate cutter

You can trim a standard laminate board correctly using a machine with a guillotine installed. It is important to remember that the board consists of 5 layers, namely unrefined paper, which prevents the penetration of moisture into the coating, fiberboard high density, moisture resistant film, decorative paper, acrylic resin. They cut the laminate without chipping, so as not to spoil the integrity of the board, and it is advisable not to use a regular knife.

You can quickly and efficiently trim laminate flooring using a convenient cutter

When working with the machine you need:

Follow safety rules;
Work carefully;
Follow the instructions from the manufacturer.

It is strictly forbidden to cut without a pre-marked line along which the disk placed on the cutter is installed. Using the machine, the cutting will be carried out efficiently, quickly and simply, and if the technology is violated, not only the material can be deformed, but also harm your hands.

Laminate Tool Set

What tool can you use to cut laminate flooring when laying it? It is worth noting that there are special requirements for the tool that will be used to cut the laminate.

Namely:

Ease of operation;
Maximum efficiency;
Quality work;
Compactness.

To make small trims, you should not use a grinder, which can be used to saw off a large and thick piece of wood, since a regular hacksaw for metal will do. It is easy to work with and does not require any special professional skills. When cutting laminate, there is no need to put pressure on it, as this may cause the panel to break and form uneven edge. A damaged panel cannot be restored, and if there are too many boards with defective edges, the floor covering will not look aesthetically pleasing.

Before you start working with laminate, you should prepare in advance necessary tools that will help you get the job done quickly and efficiently

Experienced craftsmen prefer to use a jigsaw electric type, since it does not leave dirt and allows the work to be done as quickly as possible.

It is important that safety precautions are followed and the laminate board is cut on the substrate. For example, on a bedside table or table.

You need to cut the laminate from the back side, so that in case of defects, they are not too visible. A machine with a circular saw is no less optimal, but a more dangerous option. With its help, the cut will be completed in just a few seconds, but preliminary marking is also required so that the cut is in in the right place. The circular saw can also be a manual type, and the work also involves marking and cutting.

If you use a special angle grinder, the cutting will be of high quality and correct. It is the Bulgarian who is considered an indispensable tool in the arsenal of any master or ordinary man. To cut laminate, you can use a metal, concrete or ceramic tiles. The most important thing is that the lamella is positioned with the pattern facing up, unlike other cutting methods. By cutting with a grinder, you can not only divide the canvas into 2 parts, but also polish the edge.

As for the type of tool, it is best to use a professional one rather than an amateur one, as it is of higher quality and more effective. Homemade machines may not give the desired result, and they are also not safe, but they are much cheaper. It is worth noting that any type of machine must have special supports through which the lamella is attached, which ensures safe cutting.

How to cut laminate (video)

There are an incredible number of varieties of tools for manual or automatic cutting, however, when choosing, you need to be guided by the quality of the cut and the volume of expected work. In this case, it is much easier to select equipment that will fully meet your expectations and will be useful not only for working with laminate, but also with other fabrics.