DIY wooden baby high chair. DIY high chair: step-by-step instructions. DIY wooden transforming table for feeding a baby - finishing touches

When decorating a room for a child, parents tend to purchase furniture made from natural materials. But in addition to the high cost, sometimes you are not satisfied with the limited choice of options. The solution would be a DIY high chair, which can be complemented with a table in the same design. The variety of models, simplicity and accessibility of production will help you create a real masterpiece.

To create a children's chair with your own hands, you will need various materials that can be easily purchased in the construction department:

• planks and bars for making a seat, frame and back;
• self-tapping screws that will fasten the parts together;
• medium-hard sandpaper.

Tools for the chair you will need:

• screwdriver;
• jigsaw;
• screwdriver;
• hacksaw for wood.

When making at home, it is better to use natural materials. Plastic chairs are significantly inferior to them in terms of performance properties and other important characteristics. Firstly, they do not have high strength. Secondly, their safety for children has not been experimentally proven. Natural wood is expensive, but such children's furniture is environmentally friendly and absolutely safe for health. Beneficial features are retained even after complete processing. The following types are preferred:

1. Pine. This - a budget option. The antiseptic properties of wood are valued. The finished product is easy to paint. The disadvantages include the fact that in the absence proper care the chair and table may swell and crack.
2. Beech. Its qualities are similar to oak. Easily restored if minor damage occurs on the surface.
3. Oak. Furniture for children made from this solid wood will last the longest, and it is not susceptible to rotting even with frequent contact with moisture. Remains attractive for a long time appearance– even a very active child will not be able to scratch it.

MDF does not emit hazardous resins during operation. The material is quite durable, the average service life is 10 years (provided that nothing is dropped or hit on the surface). Therefore, when deciding to make a highchair with your own hands, from MDF is better refuse. Moreover, the cost of the finished product is only slightly lower than that of solid wood models.

Plywood is an environmentally friendly and safe material. It can be easily processed even with very fine processing, and is characterized by its low cost compared to natural wood and its long service life. The disadvantages include a limited range of applications.

Chipboard has a low cost. Disadvantages include increased flexibility and the presence of formaldehyde resins in the composition. It is not recommended to make children's furniture from such raw materials - allergic reactions may occur to it.

Tools

Product dimensions

When starting to make a chair for a child with your own hands, it is important to take into account the following rules:

1. When sitting on furniture, your feet should be completely flat on the floor, your legs should be bent at the knees 90 degrees.
2. The back of the chair is strictly vertical and fits tightly to the base.
3. The outer edge of the seat should not put too much pressure on the inside of the knee.

Children's chairs are classified according to their purpose. The first group includes models for feeding. Such products traditionally come complete with a table. Most often they have sizes:

• chair height – from 840 to 900 mm;
• back width – 450 mm;
• height of the chair to the seat – 500 mm, to the back – 700 mm;
• width along the armrests – 400 mm.

The second group is a smaller copy of adult products. Tables that correspond to the height of the furniture and the height of the child will help you determine the size.

Child's height, cm	Chair height, cm
Less than 85	180
85-100	220
101-115	260
116-130	300
131-145	340
146-160	380
161-175	420
above 176	460

The parameters of the children's table must exactly match the dimensions of the high chair.

The seat should be able to easily withstand the load placed on it. The optimal thickness is 60 mm. It is advisable to make the connecting strips of the seat frame up to 20 cm. The legs in cross-section can have dimensions of 5 x 5 cm - such parameters will ensure sufficient stability. The recommended length of the backrest jumper bars is up to 20 cm. All dimensions, drawings, diagrams of a do-it-yourself highchair and other models must be drawn up as accurately as possible.

A model of the future chair made of thick cardboard will help determine whether the measurements were taken correctly. Another convenience is that it is easy to make any changes to make the final product as convenient as possible.

Selecting a design and creating a drawing

Chairs for children can be of the following models:

1. Classic versions - differ from adult sizes. Structurally they have the same elements.
2. Folding - characterized by a simple design, they are actively used in small apartments and dachas.
3. Growing chairs require the presence of adjustment mechanisms, which allows the products to be used longer.
4. Transformers - most often presented in models supplemented with feeding shelves and footrests. At the base there is a table that can later be used for games.

The last two models have the highest leg heights. This especially applies to growing chairs, which can be used from 2 to 14 years. When choosing them, it is important to carefully evaluate the quality of the design.

A wooden chair can have a solid square, rectangular or straight through back (with horizontal and vertical connecting strips) back. Such products support the spine well. You can also find the shape of a wide truncated cone.

To create a sketch and drawing, you will need to take measurements and determine the purpose of the product. You can use pencil and paper, but it is much more convenient to automate the process using specialized programs. They are convenient for creating “explosion diagrams” that will tell you how to assemble the chair.

An explosion diagram is a detailed design sketch of a product, which allows you to disassemble the chair into individual elements, estimate their number and size.

When drawing up a drawing, it is important to indicate the dimensions of each part on it. For convenience, callouts can be made on the side indicating the exact parameters of the structural elements. If you decide to use ready-made circuit, you can adapt it to your personal needs by changing the numbers. In this case, it is necessary to strictly observe the proportions.

Classic

Growing

Folding

Transformer

Decoration of the structure

Products from natural wood require protection from external factors. Varnishing helps solve this problem. Experts recommend choosing the acrylic version of this material. It creates a coating that is not afraid of any childish pranks - spilled water, paint.

If you want to make the product more interesting, you can paint it. You should give preference to bright, but not harsh colors. Muted light green, mint green, pomegranate, coral and others are suitable.

The materials used must not contain lead, other heavy metals, or hazardous or harmful compounds. Contact with a surface treated with these paints and varnishes may cause a child’s health to deteriorate.

It is not recommended to decorate the table and chair voluminous decor. First of all, due to the fact that he is one of the most common reasons injury to the child. The best decoration would be hand or screen painting. Appliques and drawings of fairy tale and cartoon characters are suitable for young children. Curly legs will look interesting. If the chair has a back, various figures are cut out on its surface with a jigsaw.

DIY manufacturing steps

There are two main models of chairs - high and regular. Numerous modifications are created on their basis. You can do any of them yourself with a minimum of tools.

Chair and table made of plywood

To make such a model, the following materials will be useful:

• plywood 9 mm;
• wood glue;
• sandpaper, grinding machine;
• milling cutter;
• jigsaw;
• varnish or paint;
• mortise edge

The diagram of a table and chair made from plywood by yourself includes a certain set of parts. Required items:

• support (2 pieces) – 370 x 340 mm;
• rigidity shield – 490 x 270 mm;
• table top – 600 x 400 mm.

You will also need blanks for a children's chair made of plywood:

• support (2 pieces) – 280 x 260 mm;
• seat – 280 x 210 mm;
• back – 490 × 280 mm.

The operating procedure includes the following steps:

1. The sheets are cut according to size. Electric jigsaw Roundings are made at the corners of the table top, back and furniture supports. Due to this, a plywood chair will become safe even for a very small child.
2. All cut areas are processed with a grinding machine.
3. The milling cutter selects the grooves into which the mortise edge is placed.
4. All parts of the table and chair are fastened together.

Detailed drawings and diagrams of the chair will greatly facilitate assembly. The corners may not be cut, but then you will need to purchase special plugs. Finally, the piece of furniture is varnished or painted.

Materials and tools

Make a drawing and transfer it to plywood

Cut out parts with a jigsaw

Remove irregularities with a milling cutter

Blanks

Make holes for the screed

Perform pre-assembly

Varnish

Finally assemble

Transformer for feeding

The structure will be stable if you follow the drawings. To ensure that they are accurate, it is better to use special programs that will help you understand how to assemble a children's high chair. Stages of work:

1. The beams are sawed to size, all cut points are polished sandpaper.
2. From the board using carpentry machine cut out the curves.
3. In the places of fixation, holes are drilled whose dimensions coincide with the dimensions of the dowels. The optimal depth is 30-40 mm.
4. The sides of the highchair are assembled. The legs are fastened to the bottom crossbar; the roundings are fixed to the top crossbar; the resulting elements are glued together.
5. To make the seat and backrest, cut 6 rectangles 300 x 250 mm. The corners adjacent on the long side are rounded. The plates are glued together in groups of 3. Finished parts additionally fastened with a metal strip and screws.
6. The sidewalls and transverse planks are connected using dowels, having previously lubricated the joints with glue. In the same way, planks are attached to the structure that will support the table top and back.

You can make a baby high chair with soft seat. It will be much more comfortable for the baby. To do this, foam rubber 2 cm thick is glued onto the seat and backrest blanks, then covered with fabric. It is better to choose a material that is easy to wash.

The feeding table is assembled using the same technology as the chair. All surfaces after cutting must be sanded. After assembly is completed, the product is allowed to dry completely, after which it is varnished or painted.

Prepare the details. Secure 2 sides

Fix the backrest

Attach legs

Screw the cross bars

Attach the seat to the movable couplings

Add a tabletop and armrests

Stool for children's room

Such products are very similar to adult models. The main difference is the size. For children, the optimal height parameter is 20 cm, in rare cases – 25 cm. The seat should measure 250 x 250 mm. The classic stool does not have a back, but if used by children, an exception can be made. It is shaped, for example, into ears or a heart.

To make a stool with your own hands, you will need a board up to 5 cm thick. The work procedure includes several stages:

1. The selected sheet of wood is treated with sandpaper No. 60 or 120 to remove nicks and chips.
2. The material is cut according to size. Mark the places of fastenings.
3. The cut areas and surfaces are treated with sandpaper or a grinding machine.
4. The blanks are first coated with stain and then with varnish. If desired, before this procedure, the jumpers and supports are given a shaped shape.
5. Based on the drawing, all the parts are fastened with wood screws.

If you place a stool on a low table, the resulting area can be conveniently used for feeding or playing with your child. The product must stand on a flat surface to prevent it from falling. For children under 3 years old, you can make a stool up to 15 cm high.

Prepare materials and tools

Make markings of parts

Cut out parts with a jigsaw

Sand the edges

Cut holes for legs

Glue the legs to the seat

Paint the product

In the form of a typewriter

This model is based on an Adirondack garden chair. The image of, for example, Lightning McQueen can be easily created by drawing the hero’s face. Many people don’t know how to make children’s highchairs look as much like a car as possible. To do this, you should add plywood wheels and cover them with stain. For work you will need a pine board 20 mm thick. The manufacturing procedure includes the steps:

1. According to the drawing, all the details of the future chair are cut out. Carefully treated with antiseptic.
2. Drilling points are outlined, and the side supports are connected in turn to the front legs. Backrest crossbars and seat slats are added.
3. Supports are fixed on the front legs, onto which the armrests of the chair are then attached.
4. The backrest strips are secured.
5. The final stage is tinting all surfaces of the chair.

The back of the chair can be slightly extended. This will provide an additional playing surface. It is also convenient to store books and toys.

General drawing of an Adirondack chair

Cut out parts

Before assembly, coat with antiseptic

Fasten the parts using bolts and screws, paint all surfaces

Chair in the shape of Lightning McQueen

Folding chair

The request for how to make a children's table with your own hands so that it can fold is common. Models of similar design are also popular. They will fit perfectly into a small child's room.

To get a folding chair made of wood with your own hands, follow these steps:

1. All parts are cut out of wood and carefully processed.
2. The slats are attached to the support bars. This is how the seat of the high chair is formed.
3. The front legs and backs form a frame. The slats for the backrest are attached to the supporting legs, and a crossbar is installed in the lower area.
4. Both crossbars are attached to the back legs of the chair.
5. A bolted connection secures 2 frames.
6. Connect the seat of the chair to the front frame. Drilled through holes and secured with bolts, which ensure folding.

A children's chair is a furniture option that is mandatory. It is easy to assemble at home even with minimal knowledge. The quality of work is ensured by the accuracy of the drawing.

Prepare the bars and connect them with bolts and screws

Still don't know how to design a highchair yourself? Our article will help you understand all the intricacies of folding this irreplaceable piece of furniture. You will see that assembling children's high chairs from wood with your own hands is not difficult.

Material

Before you start assembling the chair with your own hands, you should decide on the material. Of course, a tree is the best choice, it is completely safe and environmentally friendly. Which wood to choose? Let's start with beech. Beech is considered a dense and durable tree, and it is easier to work with than, for example, oak. If you're looking for something on a budget, birch and pine are good options. But before starting work, the wood should be deresined, since the resin, even if it is natural, is unsafe. You can also choose plywood to make a chair - a good material made from layers of tree veneer. Plywood is not heavy and is easy to process. Chipboard is the most affordable, but at the same time, the most short-lived. It is suitable for making a table top for a high chair.

Preparation

You can find materials and drawings for children's furniture in any hardware store. Dry the wood by leaving it in a room with room temperature for a day. The wood will become suitable for work.
Are you not sure that you can make all the elements of the chair with your own hands? Contact a hardware store.

The back and seat should be rectangular. The sides of the children's chair can be made and decorated as you like. Try not to make a highchair with sharp corners - they are dangerous for the child.

Material processing

Naturally, the material cannot be used in its original form for either a regular chair or a high chair. It needs to be processed. You can do this yourself or turn to professionals. The wood should be treated with hand router or regular sandpaper. With a router, processing must be done in cross sections. Apply varnish. Buy varnish with a turpentine base - it does not contain toxic substances. After letting the varnish dry, sand the surface several times. For a smooth finish, coat with varnish again.

Construction procedure and diagram

On the video: another option for designing a high chair. Be sure to check it out :)

To fasten a regular chair, you can use dowels. They are good because they can also be made from wood with your own hands. Holes with a diameter of 6-8 mm should be made under them. Place the pieces tightly onto the dowels by tapping them with a hammer. Secure with a clamp and leave for 24 hours. If you need to secure the elements of a high chair, it will be more convenient to use confirmats. Such ties are suitable for folding a large number of parts.

You can make drawings and diagrams yourself or find them on a construction site. It’s better to do the drawing yourself, measuring the child’s parameters. Carefully calculate the dimensions, height and width ratio. Of course, it is more difficult to draw a diagram for a high chair yourself, so it is better to turn to ready-made drawings.

If you have made a drawing, but are not entirely sure whether it is correct, test it by folding a cardboard model of the high chair.

Typically, children from 1 to 6 are provided with either regular wooden chairs for games or activities, or a high chair. You can make a separate one with your own hands small table and a chair using the drawing.

Regular wooden chair

For a regular DIY high chair, you will need the following parts:

• 2 short legs, 2 long (53 cm high). Dimensions of 4 legs - 3.8 * 3.3 cm;
• seat (approx. 30*30 cm);
• back (6 mm thick, 22.5 cm high);
• bars under the seat;
• drawing of an ordinary chair.

A corner should be made from the wide parts of the tall legs. Use a sander to smooth the sides of the short legs and bars. Take drilling machine and install a drill with a diameter of 6 mm. Measure the depth of 1.5 cm on the drill and mark it using the drawing. Drill along the long legs at an angle, making 12 holes. Using a chisel, we select everything from the drilled parts and make grooves. We insert the back into the grooves.

If part of the back rests, cut out a triangle and hammer the back into the groove. Make spikes on the sides of the block and round the corners. We make grooves for the tenons in the legs. We assemble the frame. If the back is too wide and does not fit into the grooves, measure and cut off the excess. Don't forget to make triangles on the sides of the back so that it sits firmly in the grooves. Take your time to insert into the back legs. Make a handle for the chair in the back. Mark the distance and cut a hole for the handle.

We insert the back into the frame. Now we make marks on the seat and cut it out. Sand the seat and insert it into the frame.

Lubricate the holes, elements and spikes for fastening with glue, secure with clamps, and leave to dry.

Wooden baby high chair

You will have to spend more time and money on a wooden high chair for feeding your baby. In order to make such a piece of furniture with your own hands, you will need:

• bars with a cross section of 400*200 mm
• board (thickness 20 mm)
• fibreboard measuring 2000*2100 mm.
• drawing of a high chair

For the chair you will need: 4 legs, 2 upper crossbars and 2 lower ones, 3 crossbars, a table top.
For the table: legs, slats, crossbars 4 pieces each, table top

We cut out the parts for the chair from the bars and sand them with sandpaper. We cut out the elements for the chair arms from the board. We connect using dowels and glue. Holes with a depth of 30 mm will be needed for the dowels.

For the side, you will need crossbars, 2 curves, 2 legs. Lubricate the dowels and holes with glue. First, assemble the bottom crossbar and legs (the angle should be 90 degrees). Then we assemble the top crossbar and two curves. We tighten everything with a clamp. Leave for one day. The second side is folded in the same way. Make sure they are the same.

Now another important stage - assembling the seat and backrest. Be careful here, as children are very restless during feeding, so all parts must be firmly fixed. You need 6 parts from a plate measuring 300*250 mm. Round the corners so that the radius is 50 mm. Next you need to start sanding the ends. Lubricate the parts with glue and press. You can connect the back and seat with screws. We glue the crossbars to the sidewalls. Then you need to connect the legs with all the planks, attach the sides with crossbars and fix the tabletop at one end. We get a ready-made baby high chair.

Video gallery

__________________________________________________

A lady acquaintance once asked one of the founders of the Encyclopedia Denis Diderot: at what age should one begin raising a child? “How old is yours?” – he asked in response. “Oh, he’s only one day old!” The philosopher shrugged: “In that case, you’re already a day late.”

A child will need a high chair not on the first day of his life, but when the baby begins to sit up independently, at about 6 months. But its role in the formation of the personality of a new person is by no means small. Firstly, the formation of the musculoskeletal system and correct posture begins on the chair. Secondly, from the high chair the child learns to handle things. This is his first property that is not a toy. Children who grew up on the lap of their mother or grandmother, on average, get along worse with others and realize their abilities less well.

The interests of parents also, of course, cannot be discounted. Feeding a small child often brings out a storm of emotions that parents may simply find exhausting at the moment. Feeding something that is spinning like a spinning top on your lap, calmly and kindly, costs a lot of effort; the child feels it and only gets more excited, which does not benefit him at all. In addition, you need to protect clothes, carpets, and furniture from volleys of porridge, soup or puree.

Therefore, out of a fairly large number of varieties of children's chairs, the first in importance and time to start using is a high chair. A little later, after about another 4-6 months, he will need a play/work chair. We will deal with them in this order.

General requirements

To make a useful and comfortable high chair for your baby with your own hands, you first need to take ergonomics into account.

First, a chair for children younger ages should not be too soft: In order for a child’s skeleton to grow correctly and muscles to develop, his body must feel reliable support. It is advisable to make the play chair generally rigid, but on the high chair and work chair, relatively thin soft pads on the seat and back are needed. A gaming chair and a work chair are most often the same, so what should we do?

You can combine these conditions by sewing cushions of the following structure according to the size of the seat and back (from bottom to top): canvas or burlap – padding polyester 5-7 mm – flannel, calico or flannel – decorative fabric. To secure them, you will have to sew on straps that tie/fasten under the seat or behind the back, but this makes making the chair itself and caring for it easier.

Second, avoid plastics. For children's items today, the safety of high-density polyethylene (produced without the use of catalysts) and PET has certainly been confirmed, but there are no suitable blanks made from them for home craftsmanship. PVC seat upholstery is a relic of the past: when there were no diapers, without it diaper rash in babies was more common.

The next point is the size of the chair. The table of recommended sizes of children's chairs for games and activities is shown in Fig. The main parameter for choosing it is the growth group. The back height is obtained by subtracting the seat height from the total height of the chair; in a high chair it must be determined separately, because his seat is raised for the mother's comfort. The table has been compiled for child care institutions; the dimensions of a chair for a child in a family can be found more accurately and simply: we look carefully at who he matches in height and build; about eyes, eyebrows, etc. disputes later. Then the prototype parent shows which chair she/he is most comfortable in, we take the dimensions from it and multiply by 0.55. A child on such a seat will be fine from about a year to 4-5.

Note: Based on the above, all dimensions of the product samples given below are subject to adjustment if necessary.

Materials

What to make a high chair for a little one is also an important question. It is better not to use metal at all, or small quantity(fasteners, for example) and so that the child does not have access to it. Children's bodies are generally more resilient than adults, but babies' skin is very sensitive. This is determined by the instinct of self-preservation: what is simply slippery and a little cold for an adult is a danger signal for a child. Since he himself cannot yet avoid her, he has to appeal to his parents. Those who have children know how. But they don’t always understand why, and that’s what makes them cry out loud.

For example, in Fig. on the right is the erroneous use of steel fasteners.“Intensive use of corners” not only does not strengthen the structure, contrary to the claims of its author, but it is also dangerous for the baby. An adult’s finger will go unnoticed in the corner with a self-tapping screw, but the baby may get scratched. In general, children don’t mind scratches, but if he is regularly placed in something that bites for feeding, then how will this chair affect the child’s psyche? The question is rhetorical.

Processing and finishing

So, we are left with practically only wood, MDF and laminated chipboard of class E0 in terms of phenol emission. In a high chair for a very young child, it is still better to use hardwood or MDF, they are completely chemical-free. Hypersensitivity to pine resin or traces of phenol-containing compounds occurs in about 1 in 400,000 babies, but how can you be sure it's not yours? It is impossible to identify in advance.

The baby chair is exposed to external chemical influences approximately of the same nature and to the same extent as a kitchen stool, but the sanitary and hygienic requirements for it are much stricter. Therefore, before assembly, the parts of a wooden highchair must be treated with a water-repellent and bactericidal composition, and the finished product must be covered with a protective layer.

There is also almost no alternative here: impregnation is a water-polymer emulsion or, instead, PVA diluted three to four times with water. Coverage – acrylic lacquer water based. There is no reliable evidence of complete safety for children of other compositions for processing/finishing furniture. Be especially wary of stains; Children's furniture with varnish is best left as is. Design and decor in in this case factors are by no means determining.

About plywood

When making a high chair for the firstborn from wood, an amateur craftsman (who may be taking on furniture for the first time in his life) will have to face a number of technological difficulties, see below, respectively. section that cannot be overcome without a workshop and special tools. Plywood can help out; You can use it to do almost everything at home. But not every one. Simple birch (not waterproof and not baked) and also simple construction or packaging are definitely suitable. The latter is covered with so-called veneer. pine trees cut down in winter. Dried pine already contains almost no resins, and in the process of making plywood, their remains are completely removed. These types of plywood are made with casein glue, which is absolutely safe for children. They are given moisture resistance and additional strength by the impregnation described above, but twice: a second time after complete drying (about a day) of the initial one.

About the glue

Due to its combination of qualities, PVA is most suitable for gluing and gluing in the manufacture of children's furniture. Modern furniture pur-glues are much stronger, but also more expensive; for a product whose service life does not exceed 5-7 years, the first is unimportant, but the second can “bite”. But PVA has the following advantages:

• Absolutely harmless and safe, which has been proven by more than half a century of experience. As they say, at least eat it; even if the liquid gets into the eyes, it is washed off without any residue with water, if you rinse it immediately.
• PVA drips can be easily cut off with a mounting knife, and their remains can also be easily sanded clean.
• The PVA joint can be separated by warming it up properly with an ordinary household hairdryer. This is important if the high chair needs to be disassembled and stored until the next addition to the family. Also, if you need to replace its individual parts as the child grows, see below.

The very first high chair

The most commonly used designs for chairs for feeding children are the following, in order of increasing complexity of manufacture:

1. Stands/holders – boosters – for feeding the baby on an adult chair, hard and soft;
2. Typical (classic) home folding high chairs;
3. Children's transforming sets and “growing” (for growth) chairs;
4. Stationary chairs for feeding babies.

The latter are used either in children's institutions for the youngest, or in wealthy households with excess living space. In both cases, the chair requires high strength: in children's homes it will be used by many generations, and wealthy owners care about prestige and also design. As a result, a stationary chair for feeding children turns into a rather complex product, the manufacture of which requires special tools and production conditions; for an example, see the drawings in fig.

Boosters

These are attachments or devices for feeding a child on a chair and at a table for adults. Rigid booster chairs (the first 3 from left to right are shown in the figure) save space in small apartment, therefore quite popular.

However, it is impossible to make them fully compliant with the requirements of children's ergonomics. The second is for children from 6 to 9-12 months. they are of little use. Third, soft attachments to an adult chair (leading manufacturers invest a lot of money in their development) do not provide a complete guarantee that an angry fidget, delighted with his favorite juice, will not fall on his side along with himself, the booster and his dad’s chair.

Much more practical are soft boosters for feeding babies, which are no longer chairs, but something like a kangaroo pouch, on the right in the top pic. They cannot be used constantly; there is a risk of ruining the child’s posture. But at the dacha, picnic or on a trip, the pocket for feeding - the booster will be very useful, especially since it will take up almost no space in mom’s bag.

Making a soft booster for feeding a child is already a more feminine task, because... it is sewn; the pattern is shown in Fig; they are given without allowances for processing.

Note: the slings are wound from the sides of the cape onto the back of the chair from under the bottom, brought out through the openings and tied or fastened.

Home classics

How the familiar folding high chair for feeding babies at home is constructed, and its dimensions are shown in Fig. Materials - timber 40x20, 75x20 (footboard and leg ties), 16x25 (backrest slats, seat apron, tabletop frame), board 100x20 (inserts into the frame of the front legs) and plywood 6-8 mm (seat, tabletop). Assembly, except for hinges, is on confirmats (furniture screws) 60x6.

The connections marked in red are hinged: the table tilts up, and the frame of the rear legs is pressed against the front ones. The bolt heads (M6-M8) are on the inside and covered with plugs, red mark with an exclamation mark. The seat is hung on the front support bar on card hinges.

To fold the chair, first lift the table and move the frame of the rear legs slightly back. Then the seat lowers itself, and the frame of the rear legs is pushed forward until it stops - the chair is folded. And when unfolded, the entire kinematics of this chair locks without additional clamps according to the principle of a dead center, and let the little eater wriggle there as he wants - the chair will stand under him.

The only technological difficulty in the manufacture of this chair is the joining of blanks for the side frames of the front legs on dowels (lamellas) in the mustache or dowels. But you can get around it if you make the front frame from plywood, see below. Its operational drawback is that the thickness of the package is more than 10 cm. For a pantry in a small apartment or a closet in the hallway, this can be too much. And here plywood comes to the rescue, see below.

Transformers and growing

Transformable children's chairs for all ages are on sale, 3 positions. on the left in Fig. They are really convenient and functional, but technologically complex: part necessary details It can only be done in a workshop at a factory. Accordingly, the cost of such chairs is quite high.

For repeating with your own hands, a more accessible set is a chair with a table, on the right in Fig. Which is what many people do, but they immediately discover that a set with an upside-down table takes up more space in the apartment than a children’s high chair and table separately.

But the main thing is that this building is unhygienic. When the child sits down at the table, the edge of the large tabletop closest to the floor in the feeding position will be literally under his hands. And also - the undersides of the legs in the 6-12 month position, which have now become legs, and even awkwardly protruding upward.

There are no materials that do not scratch or cause microcracks. It is impossible to remove ingrained dust from the floor, which is what microbes need. Changeling kits for small children have been on sale relatively recently, but there have already been cases when they became foci of infection. Self-made ones from wood only make the danger worse.

The epidemic of fashion for transformable furniture (in this case there is no other way to say it) has given birth to real monsters, see fig. on right. When the child reaches table age, the chair is simply... sawed off, and the former supporting pyramid is turned over and becomes a table. Everything is clear about the hygiene of a large countertop, see above. As with a feeding table that is too narrow: there will be no food on the mother and on the floor only if a specially programmed robot is sitting on the chair.

And first of all, put yourself in the child’s place: there is a rigid fence on all sides. All that remains, as they say, is to put him on a chain. Secondly, a large table will be unusually rolly. Well, have you ever seen tables for neat adults whose legs converge downward? It’s funny, of course, but whoever starts this at home will probably not be laughing.

“Growing” chairs

In general, if we are talking about a small child, it is better not to experiment with transformable furniture, excluding proven folding designs. For example, let’s take “growing” chairs, see fig. left. You can really sit on this from a simpleton to his dad, but it won’t be quite comfortable at any age. And in order to adapt the chair for growth for feeding, it will have to be turned into a product comparable in complexity to a stationary chair for babies.

How to take everything from plywood

High chairs for babies are often made from plywood. Many homemade designs turn out to be quite practical and good looking, on the left in Fig. However, once the need has passed, it is hardly possible to adapt them for something else, first. Second - see on the right in Fig. laid out parts. Material waste - by eye no less than 60% Although good plywood You can buy it for 300 rubles per sheet 1550x1550, anyway, it would be advisable to do without crooked scraps that are now useless.

Now is the time to realize that an adult can easily adapt to feeding a baby. folding chair- plywood board, see next. rice. Dad's for fishing or mom's garden, depending on who is in charge in the family. In terms of sanitation and hygiene, it is better, of course, to make this chair right away for a little one, and use it for adult use when he grows up.

From the remainder of cutting out opening A, you will get 2 struts for a child’s table with L-shaped legs; You will need to cut grooves for them in the sides of the chair. To feed a child, it is advisable to add a fabric back to such a chair: it will not reduce the comfort for adults, and it will not interfere with the folded chair hanging on the wall. A small tabletop is attached to struts on piano or card hinges, then the feeding table will also fold into a compact package.

Note: It is better to measure the dimensions of the struts using a ready-made, unfolded chair. This will be easier and more accurate than fiddling with trigonometry.

Another folding chair of the same type is shown in Fig. on right. It is smaller, 500x750 when folded. It’s not bad because from a sheet of plywood 1550x1550 there are exactly 6 of them, and the length fits into the trunk of almost any car. The letter w indicates the cutting width. In general, look at your child, yourself and your needs.

Older chairs

At the age of about one year, the child will already need a chair on which he can sit down, move it, and rearrange it. Chairs for small children in the age category following babies are play chairs (on the left in the figure below) and work/study chairs, in the center. Working chairs for children differ from play chairs primarily in their armrests; they are necessary for the child to develop correct posture. Then, the seat height of the work chair can be immediately taken based on the oldest preschool age, i.e. up to 400 mm. In this case, you need a step; preferably repositionable. The approximate dimensions of a high chair for babies of the “second stage” are given on the right, but, as mentioned above, they need to be specified according to the child.

Drawings of chairs for older children are given below. rice. On the left is a game of the simplest design. The legs are the optimal length for a child aged 12-36 months who often plays on the floor. Fasteners – wood screws 40x4.2.

High chair for a child “like an adult’s”

The chair on the right is more complicated; its parts need to be marked on a grid and grooves cut to connect them. But it is universal, playable and working. The small protrusions of the sidewalls above the seat are enough to prevent a normally active child from sitting down with half of his butt hanging in the air. The seat height of 400 mm is the maximum for very young children. It can be made minimal first, approx. 220 mm, and then change the sidewalls as they grow; It will take a little labor and plywood, but mom will have something to say to dad on occasion. So, if dad is prudent, it is better to immediately cut the sidewalls for growth.

This chair is basically easy to assemble, like a puzzle. In the mobile version, say, for trips to the country, you can leave it like that. But with constant use, the chair will soon become loose, no matter how tight the joints were initially. Therefore, it is better for a child of this kind to glue his home chair with PVA. Dismantling, if necessary, put into storage - see above, about glue.

Finally, there is a category of children who, having barely realized themselves in this world, want everything to be like an adult. This is generally a useful quality, but dad will have to work harder on a chair and other furniture for the child. The design and dimensions of a highchair “like an adult’s” are shown in Fig. on right. A wooden chair of this design will require quite complex technological techniques, but even in this case plywood will come to the rescue, see next. chapter.

Video: example of a simple DIY mini-chair

Technology and plywood

To make a high chair for children from wood, you need to know or will have to master how to make some carpentry joints: on dowels, using dowels (lamellas) and tongue and groove. How they are produced, using examples of carpentry, see the videos, arranged in order of increasing complexity:

Video #1: dowel connections

Video #2: corner connection with dowels for frame structures (bursting corners)

Video #3: tongue-and-groove connection

Video #4: direct keyway connection for joining board panels

As you can see, the houses are simple hand tools Only pos. can be done with sufficient quality. #1. Pos. #2 and #3 for a novice carpenter will turn out by hand with ease, and for poses. #4 and a good professional you can’t do without a workshop and special equipment. And now - shhh! - all this can be done at home by a “complete teapot”, using only a jigsaw and a little chisel. If the parts blanks are assembled with glue from 3 layers of plywood, the thickness is, respectively, 1/3 of the required one. Among other things, this technology allows you to assemble parts complex shape from small-sized fragments, which makes it possible to denser, i.e. cut the material economically.

How straight and angular tongue-and-groove joints are made in this way is shown in pos. 1 and 2 fig. resp. If the tenon is made trapezoidal with rounded corners, then the strength of the joint will increase several times, i.e. will be sufficient for adult furniture. This technology is not used in production - it’s a hassle and therefore unprofitable, but at home it’s better than buying or renting a machine for 60-100 thousand rubles.

To glue a package of blanks into a PVA part, you also do not need any special devices:

• Lay plastic film on a flat floor or table.
• Both surfaces to be bonded are lubricated thin layer glue; It's better to use a brush.
• Leave the adhesive layers until they are semi-dry and tack-free, when the adhesive film begins to become translucent at the edges.
• Place the blanks in a bag and press them.
• Cover the bag with another layer of film and place pressure on it from a dispersed load (books, for example) at a rate of at least 20 kg per 1 square meter. m of glued area.

Note: because The blanks in the bag may “float away” a little during gluing; they need to be cut with an allowance of 1-2 mm for finishing.

The tongue-and-groove corner joint must be reinforced with self-tapping screws with a diameter of no more than 0.5 times the thickness of the tenon, a pair per tenon. For example, if a part is 15 mm thick and consists of 3 layers of 5 mm each, then the diameter of the hardware is 2-2.5 mm. Glue is applied to the tenon and groove; the first is inserted into the last, as soon as the glue begins to come off (after 2-3 minutes), and immediately the connection is tightened with hardware.

How to tighten screws

In the above and all other cases of fastening parts with self-tapping screws, it is necessary to pre-drill blind holes for them with a diameter of the body (rod) of the self-tapping screw without threads and a depth of 2/3 of the length of its threaded part. A hole for the screw head is also selected in advance. After screwing, the head is covered with putty made from sawdust of the same plywood on the same PVA; Up to 2.5-3 volumes of sawdust can be added to 1 volume of glue.

Finally

Well, now on to the new thing - new impressions and bon appetit. Just don’t throw porridge in celebration, my parents tried.

With the birth and then growth of a child, there is a constant need to acquire new things. Many of them you can make yourself. This will not only save money, but also make a product for your baby whose quality you will be 100% confident in. For example, if you carefully consider the choice of materials, select drawings, follow the instructions, then making a really good highchair for children with your own hands is a very real task that every parent can do.

What should a chair and table be like for feeding a baby?

The main requirement that applies to all children's furniture is safety. Materials must be environmentally friendly. Chairs and tables are made without sharp edges or dangerous joints. In addition, small children are very active, so stability and reliability of the structure are of particular importance.

When making a high chair that will help you comfortably feed your baby, consider the following wishes:

• the product must have a comfortable, preferably soft seat;
• a comfortable chair back cannot be higher than the child’s shoulders, it should be soft and comfortable;
• It is advisable to equip a children's chair with comfortable leg support;
• Caring for the high chair will be easier if its surfaces can be washed, and the upholstery material dries quickly or has water-repellent properties.

The simplest and most economical option for creating a high chair with a table is to retrofit a regular children's high chair with a shelf-footrest and attach a small table to the armrests, on which you can place a plate of food, a cup of juice or tea. Increasing safety, such products are often equipped with harnesses (with carabiner clasps) that securely secure the child.

Multifunctional models are popular among parents. For example, a transformable children's chair helps to comfortably place the child during feeding. It consists of two parts: a small children's high chair itself with a small table-overlay and a structure that is at the same time a high-slung base and a separate children's table.

The first use option is more suitable for a child from 6 months to 2 years. On such a chair you can simply feed your baby by placing his plate on small table, mounted on the railing of a chair, or you can move the entire structure to a large adult table. The second method is recommended to be used from 2 to 5 years. He is separate location children's chairs with a table. At this age, girls and boys can already do a lot on their own. Sitting at such furniture, you can eat, draw, play, even learn to write.

What you need to make a baby feeding chair

When making children's furniture, professionals recommend using linden, beech, and birch wood, but you can also use pine. It is permissible to make individual parts from plywood. Small children, especially with the appearance of teeth, love to try and chew on everything, so it is important to choose non-toxic Decoration Materials- varnishes, paints acrylic base.

Materials, tools for work

To make it with your own hands comfortable, as well as practical model table-stand and high chair, you need to prepare:

• Wooden beam with a cross-section of 400x200 mm, the legs of a chair, table, crossbar will be made from it. When choosing wood, make sure that there are no resin stains or knots on it. Such defects significantly complicate the processing of parts of future furniture.
• Small board(about 250 mm thick), from which the armrests will be made.
• A sheet of fiberboard or plywood will serve as the seat material.
• Plywood for table top.
• Drill.
• Clamps.
• Hacksaw.
• Tape measure, square, compass.
• A pencil will help you mark the wood.
• PVA glue.
• Varnish or paint.
• If you are making the seat and back soft, take foam rubber, upholstery fabric, and furniture stapler to securely fasten them.

Preparing parts, assembling a chair

1. Using tools, prepare the following parts:

• 4 chair legs, 390 mm long;
• 3 cross bars of a chair, 300 mm long;
• 4 rounded chair parts;
• 1 chair tabletop – 340x200 mm (size, shape can vary at will);
• 2 upper crossbars for the chair, 220 mm each;
• 2 lower crossbars for the chair, 340 mm each;
• 4 legs of a table-stand, 500 mm long;
• 4 cross bars of the table, 340 mm each;
• 4 strips – table parts 410 mm each;
• plywood from which the tabletop will be made, its dimensions are 380x450 mm.

If the farm has boards or wood scraps, they can replace some materials. You just need to give them the proper appearance and size.

1. The main thing that needs to be done after cutting the parts is to consistently sand them thoroughly with sandpaper. wooden blanks. After grinding, all surfaces should be perfectly smooth, without unevenness or roughness, so that the child does not drive a splinter.
2. Based on the attached drawing, transfer the markings of the rounded parts to the surface of the wood. At the same time, keep in mind that in order for the part to be strong, the wood fibers must be located perpendicular to the angle of its bend. Using a carpentry machine or just a hacksaw, cut out these elements.
3. You can make your own dowel blocks 8x20x50 mm or purchase them in a special store. Using dowels with glue, the parts of the chair and table will be connected. Pre-drill the holes carefully (approximately 30-40 mm). You can also use self-tapping screws to securely fasten the parts together.
4. We assemble the side of the chair (2 curves, upper and lower crossbars, 2 legs). Lubricate the dowels and holes with glue, first the legs - connect them. Then we do the same with the bottom crossbar and roundings. During work, we check that the connections are made at right angles. After assembly, we tighten and fix the elements with a clamp until they dry completely (about 24 hours).
5. We assemble the second side panel in the same way. Let's compare both results. Additionally, we process all parts with sandpaper.
6. Let's start manufacturing and assembling the seat and back of the chair. Cut out 6 pieces 250x300 from fiberboard. Moreover, the radius of curvature must be made 50 mm (as in the diagram). We carefully polish the cutting areas of the parts. We glue 3 parts together and place them under the press.
7. We connect the finished back and seat with your choice of a corner or screws. You can also use a strip of tin 80-100 mm thick for this. Bend it in the center and attach it with screws.
8. Assembling a children's chair. We fasten the sidewalls of the product with crossbars (300 mm). In the slats on which we will attach the seat, we make 4 holes for dowels. There are also 4 in the plank under the back (of which: at the ends – 2 pcs., in the plank – 2 pcs.) Make holes on the sides: 2 for the plank that will hold the backrest, and 2 for the plank for installing the tabletop.
9. Before final assembly you need to check the accuracy of the connections, then assemble the entire structure using dowels and glue. After a day, sand the chair again and remove excess glue.
10. Cover the product with environmentally friendly varnish or paint.

Table assembly

1. The assembly of the stand table follows the same algorithm as the chair:

• We put markings to indicate the connection points.
• We prepare the dowels and drill holes with a drill.
• We check the angles and correct connections.
• We assemble a fragment of the product, leave the glue to dry (we fasten the legs with the help of lower and upper strips of 410 mm; each side is secured with crossbars 340 mm long).
• We install the tabletop.
• We sand all parts of the product (even hard-to-reach ones).
• We open it with varnish or paint.

To make the transforming chair more comfortable for the baby, it is better to make the seat and back soft. Glue furniture glue on these surfaces pieces of foam rubber or several layers of batting bigger size(by 10-20 mm). Cover the seat and back with upholstery fabric or leatherette. Use a stapler to secure the stretched material with reverse side. It would be appropriate to install a cover (fabric or plywood) on the back side of the backrest to prevent the child from accessing the furniture staples.

As you can see, making a wooden children's chair and table with your own hands is not very difficult task. This way you will provide your child with a comfortable and safe place for eating, and subsequently for educational games and drawing.

How to assemble a high chair. Wooden high chair, transformable chair. 9 best high chairs - 2017 rating. Children's high chairs - buy online. Very good high chair, corresponds to the description in all respects, we like it.

High chair “Nanny 4 in 1”: assembly instructions.

Wooden feeding table instructions. Wooden feeding chair - buy a chair for.

High chairs for feeding, Instructions included and easy to turn into a table.

Natalka transformable chair, wooden high chair for. Detailed plan of work for the Day Camp.

one at a time We install the feeding table on the wooden frame for. Wooden high chairs Table for Globex high chair Mishutka. In the IKEA online store you will find: big choice children's high chairs for feeding. Which high chair to choose? and the footrests of the table will be very Instructions. wooden feeding - lighter in weight and inexpensive. For and a feeding table. The squads disperse to their rooms. 13.00 – 13.30 Competition to create an emblem (coat of arms) for the camp. DIY high chair: drawings and dimensions. The best classic high chairs for side feeding. Large wooden table. Second stage: assembling the sidewalls. The future chair will have two sides, each will need them. High chairs for feeding: prices, buy a high chair for feeding.

Do-it-yourself baby high chair - drawings, sizes, diagrams

Travel high chair

The baby is growing up, and sooner or later the question arises: how to determine the child’s place at the adult table? Everyone has known for a long time that an indispensable assistant A highchair could be a good fit for this.

But what if you are going on vacation or to the country? In this case, it is worth purchasing a special travel high chair.

DIY travel high chair

You can either purchase such a chair in a store or make it yourself. If you like hand-made and are not averse to doing handicrafts, making a travel highchair for children will not be difficult for you.

The Internet is now full of master classes and video tutorials, thanks to which even not the most “handy” parent can make a high chair for a baby.

In order to make such a chair, you only need a correctly constructed or store-bought pattern and fabric in two colors. The fabric should be natural, durable, preferably not easily soiled, and easy to care for. If you have a good imagination, you can try to decorate the chair by sewing large multi-colored buttons or simply decorating it with ribbons and attaching homemade toys.

Your child will be delighted to see the fun decorations on his high chair while you do other things.

Ready-made travel highchair

Of course, not everyone has the desire and time to make things. Most modern parents prefer to buy ready-made accessories, especially since a fabric travel chair is not expensive at all.

Totseat travel chairs are becoming increasingly popular. No wonder: quality materials and an attractive price do their job. These chairs are very easy to use and wash.

The fabric chair folds into a special bag for easy carrying. Before placing the baby in it, the chair is installed on an “adult” chair and tied to it with wide ties. The child sits in the resulting pocket and now will not fall or get out. He will be happy to sit with his parents at the table, eat and wait for mom and dad to have lunch in peace.

Whatever travel highchair you choose for feeding your baby, whether it’s homemade or bought in a store, it won’t lie and gather dust in a corner of the house if you are active and mobile parents who prefer to travel with your baby.

Related articles:

Pacifier thermometer Babies often have a temperature, but measuring it in a fidget is a real problem. Those children who are accustomed to a pacifier will probably not refuse measurements with a digital thermometer in the form of a pacifier.	High chair from birth With the start of complementary feeding, the child needs a place to eat - a high chair. But such a chair can be bought from the very birth of the baby, however, chairs in the “0+” category are much more expensive than usual, but are very comfortable for parents.
Pacifier Is a pacifier good for a baby or is it more harmful? What types of pacifiers are there and how to choose the right one? All about children's pacifiers in our material.	Developmental mats for newborns It is believed that a developmental mat is fun for older children, but manufacturers have already created mats suitable for the little ones - adapted to the hearing, vision and activity of newborns.

A children's high chair is a useful and necessary thing. Firstly, it is much easier for a mother to feed her baby if he sits comfortably in a high chair rather than spinning in his arms.

Secondly, a high chair allows you to instill in your baby the basic rules of etiquette at the table. Well, thirdly, you can simply leave the child in the high chair, inviting him to take care of his toys while mom prepares dinner or washes the dishes.

However, in fairness, it should be noted that a high-quality and comfortable chair costs a decent amount.

And, unfortunately, not all families can afford such an expensive pleasure. Therefore, for many parents the pressing question is how to make a highchair for children with their own hands, so that it meets all the requirements and personal wishes.

Step-by-step instruction

To make a baby high chair with your own hands, first of all you need:

1. Decide on the design and size; if experience and skills in working with wood are not enough, then it is better to choose a simpler model with a minimum of rounded parts and additional elements.

   As for sizes, in most cases the height dining table varies from 72-76 cm, but depending on the individual characteristics of the child, the parameters of the products can be completely different.

2. Draw up a drawing to review all dimensions and proportions again.
3. Select material.

   As a rule, this is an environmentally friendly and safe tree.

4. Prepare the necessary tools and fasteners (angles, self-tapping screws or screws, tape measure, pencil, jigsaw or hacksaw, screwdriver or screwdriver, wooden blocks and a piece of countertop or plywood, wood varnish or stain).
5. Once the drawing of a children's high chair is ready, the tools and materials are also ready, you can immediately begin creating a masterpiece with your own hands.
6. To begin with, all the parts are cut out, then the finished elements are processed with sandpaper and assembled into a single structure.

When choosing the size of the product, you need to make sure that the child will be comfortable in it; for this you need to know the distance between the seat and the table. Do not make the chair too tight or loose. The edges of the components of the high chair must be carefully processed so that the surface is smooth.

The finished product can be varnished. The varnish is applied in several layers to create a smooth and matte surface. The seat can be upholstered with foam rubber and leatherette, or a layer of leatherette can be placed under the upholstery fabric. You can sew a removable cover for the high chair. Thus, a do-it-yourself high chair will have a more attractive appearance.

For the little ones, it would be a good idea to install seat belts.

We invite you to watch a master class on making such a chair.

Related articles:

IKEA children's tables and chairs Children's tables and chairs from the Swedish company IKEA are the most popular in the world.	The order of eruption of baby teeth Many parents do not strive to carefully care for their children's baby teeth, justifying themselves by saying that they will fall out anyway. However, the future health of permanent teeth also depends on the condition of temporary teeth. DIY children's chair: 280 photos + Drawings Dimensions Instructions Even the sequence of their growth is important.
Children's room for a boy A child’s room is his personal corner in the house where he will spend for a long time own life. Therefore, it should be designed conveniently, beautifully and according to the baby’s age. What could a boy's room be like?	Baby walkers Many mothers add “walkers” to their list of purchases and gifts almost from the birth of their child. How necessary this adaptation is, each parent decides for himself. But the opinion of doctors regarding them is unequivocal - walkers do more harm than good. Rather, it’s even like this: there is no benefit for the child.

Making a high chair

Making your own high chair for feeding your baby is quite easy if you have some carpentry skills.

DIY high chair

If you have never tried to make anything before, then it will be more difficult for you, but only a little.

On your own, you can easily make a practical, beautiful, and most importantly, safe children's high chair.

It is quite possible that it will even serve for several generations or even become a family heirloom.

Strictly follow all the instructions from our instructions, and you will certainly make a wooden chair for your child that you will be proud of.

List of materials and tools

• 24 linear meters of board thickness? inch and 1/8 inch thick for finishing.
• 4ft oak plank.
• Jigsaw.
• Sandpaper.
• 4 cross brackets.
• 4 clamps (clamps).
• Wood glue.
• 12 #8 Phillips head screws.

Manufacturing instructions

Step 1. Measure the height of your dining table from the floor.

This will help you choose the right height of the highchair so that your child can sit comfortably at the table with you.

Step 2. Cut grooves for the side rails measuring 1/4" by 3/4".

A groove is an open groove in a chair piece. To achieve the desired slope when assembled, like adult chairs, make a bevel by cutting the top edge of the groove 1/32 inch larger. This is easy to do by tilting the saw 7* from perpendicular.

Step 3. Cut a square of the required width from the board.

The width will depend on the child's age, height and weight. Also decide until what age of the child you plan to use this highchair.

Step 4. Glue the sides to the seat, using clamps for a more secure attachment. Let the glue dry completely.

Step 5. Process all the sharp corners of the parts with a milling cutter or jigsaw, giving them a rounded shape - this must be done so that neither a child nor an adult can accidentally injure themselves on sharp chips.

Step 6. Cut the chair backs to be about the same size as the seat itself, but in a polygon shape.

This is easy to do by tilting the seat piece 83 degrees above the horizontal surface and tracing the outline of the shadow. The shape of the upper arch of the back of the chair can be made curly, as your imagination suggests. Sand all sharp edges again to remove any nicks.

Step 7 Connect all the parts of the chair together, fasten them with screws, screwing each joint of the chair. At the end of all the work, decorate the chair with bright pictures or other decorations of your choice.

If desired, a fabric fastening strap can also be added.

Before you start work, be sure to draw for yourself approximate diagram future high chair. This will help you better imagine what exactly you want to get in the end. You can also independently select ready-made drawings on the Internet, in the library, or find them in the nearest bookstore.

When working with power tools, always wear safety glasses to protect your eyes from chips.

It is possible that for the first time it will be very difficult for you to make symmetrical grooves, without having sufficient experience in this matter.

Just in case, when buying material, take a little more than you need in order to be able to correct the mistake if necessary. Make sure that your child can sit in this high chair independently without falling out of it. Unfortunately, very often young children are injured when falling from such structures.

We wish you success in your endeavors!

Tell your friends about us!

Return to list of articles

Baby high chair: how to assemble it?

• How to assemble a children's high chair "Agu"
• How to assemble a baby high chair “Baby” with your own hands
• How to assemble a children's highchair "Nanny" 4 in one
• Necessary materials and tools for assembling a high chair

For every parent, sooner or later the question arises of increasing the functionality of children's furniture.

All interior items in the nursery must become real transformers in order to justify the money spent on them and not stand unused. In addition, modern inventions can partially free the hands of busy mothers, turning them into a chair, a swing, or a whole set of furniture.

The first step is to assemble the chair, and then you can move on to assembling the table, which will be much easier to assemble.

Often, such devices can complicate the life of parents while they figure out how to assemble them after purchase.

An ordinary children's high chair will be no exception. Of course, it is easy to assemble a high chair as indicated in the instructions, but it is not always included, and even if it is, it is not always clear to the user.

How to assemble a children's high chair "Agu"

All children's stores sell children's furniture in disassembled form, except in cases where the last piece is left on the display.

To assemble the Agu model high chair at home yourself, you need to remove all the components from the box, including the Euroscrews with a special key for them.

Small parts are already assembled into large parts, which makes the task easier. The easiest way is to start assembling the chair and then move on to the table.

Diagram of a high chair with dimensions.

The chair has two armrests with triple vertical wooden rods.

The edge to which the rods are closest is considered the front. Connect the armrests with a transverse wooden strip, screwing it with two bolts in front of the armrests, from below. After this, the base for the high chair will be stable. Next, you should install the soft seat of the high chair into the base so that the limiter strap is in front and below.

The wooden slats are already screwed to the bottom of the upholstered seat.

Its seat is secured with four bolts, and the back to the armrests with two. Now all that remains is to install the plastic tabletop, which is placed on top and snaps into place with grooves in its bottom on the armrests. On the left armrest there is a plastic adjuster for the distance of the table top.

It's time to move on to assembling the table or high chair stand.

To do this, you need to connect two identical parts, reminiscent of the Roman numeral II, perpendicular to each other. On them, the places where the bolts are connected are marked with dashes. Then place the resulting structure on legs and screw the remaining part with a solid wall to form a stable structure. Connect the legs with two jumpers and secure them with bolts.

This completes the assembly.

To make the high chair higher, you need to turn the table with the table top backwards and place the chair and plastic table top on top. To make a set, lower the chair to the floor again, remove the plastic tabletop, and move in a table with a wooden tabletop.

How to assemble a baby high chair “Baby” with your own hands

Parts for assembling a high chair.

Initially, you need to remove all the feeding parts from the box and lay them out on the table.

Children's high chairs: options, patterns, sizes, with and without a table, folding

It can be immediately noted that there are much more individual parts than in the previous example, but each of them is numbered - table parts with numbers from 2 to 9, chair parts from 11.

Euroscrews with a key should also be included in the kit. To start assembling a high chair, you need to arrange all the components in numerical order into table and chair parts separately. Then you need to align and bolt the parts with holes numbered with the same numbers, starting with 12. Then connect the parts marked 13.

Assemble the second part in the same way, alternately connecting the same configurations of numbers, then connect these parts with a crossbar.

Now you can assemble the high chair by screwing a soft seat to the resulting wooden base, while the crossbar should be under the child’s legs, and the limiter strap should hang down.

The seat is secured with six bolts. The last step in assembling the high chair is to screw the wooden tabletop with two bolts to the armrests. An additional hole in the armrest will allow you to easily adjust the position of the tabletop in the future by moving it away or moving it closer to the child and twisting it.

Scheme of connecting parts with a Euroscrew.

Thus, the high chair is assembled, all that remains is a stand or table for it.

The logic for collecting is the same. Select four elements with cell numbers 3 and screw them together. The result should be a part in the shape of the letter H. The second similar part should be twisted in the same way from four elements according to the numbering of cells 3. Only the attachment of the last element of the part will differ, it will be numbered 2 and will not be twisted joint to joint, but as a result of superimposing one strip on another.

All that remains is to assemble the feeding table by connecting all the large parts.

First you need to combine the table top with the leg by twisting the cells numbered 5. Add a third part and twist the cells numbered 6. Secure the resulting structure with two wooden planks with cell numbers 4.

After assembly, be sure to check the strength of all connections by additionally tightening them with a wrench. It is not recommended to tighten the bolts too tightly, as this can shorten the service life of the product and increase wear on threaded connections.

To make a high chair for feeding a child, a chair with a soft seat must be placed on a table, and its table top should be under the legs in front or behind, as the parents wish.

And to get a set of furniture, you need to lower the chair, for convenience, unscrew the small tabletop from it and move a large table on the floor.

How to assemble a children's highchair "Nanny" 4 in one

A high chair that seems complicated at first glance. But at the same time, such a high chair does not require complex assembly; you can only get confused in changing modes of use.

A complete set of a high chair consists of a seat, base, frame, table, legs, footrest, hangers, ring, bushing, cap, soft flooring, axle and safety straps.

To install the chair on the base of the high chair, you should install the bushings and rings included in the kit on the ends of the axle inserted into the seat.

Pass the free ends of the axle into the holes in the base. You will have to apply force when pulling the caps onto the protruding ends of the axle. To simplify the process, you can pre-heat the elastic caps in a container with hot water. When the child grows up, it is convenient to install a footrest on the seat of the high chair, securing it with brackets.

To get a rocking chair from a high chair, you need to turn the special stops to the internal position, without making sure they touch the floor.

The degree of inclination can be easily adjusted with one movement of the hand by changing the position of the stand in the recesses of the grooves.

To get a high chair with a table, you should install the stand located behind the back of the seat in the lower groove and secure it tightly into the lock.

Then you need to install a plastic tabletop on the armrests of the feeding table and firmly fix it in place, pushing it into the grooves until it clicks. The supports on which the high chair is located must be smoothly rotated to the lower position so that they form a stable structure.

You can turn a high chair into a simple baby chair with a few simple steps. It is enough to install the legs of the chair in a special frame.

The legs are secured using buttons on the chair. Then move the frame apart and put protective covers on the hinges. The support can now be returned to the down position. Hang the chair on the hooks, insert the support into the grooves and secure with a lock and hooks.

Here's everything you can get from the Nanny high chair.

Necessary materials and tools for assembling a high chair

In order to assemble a transformable high chair of the “Agu” or “Baby” type, you will need the following materials:

1. Wooden crossbars.
2. Soft seat.
3. Tabletops small and large.
4. Euroscrews.

One assembly tool:

All tools and materials must be included with the high chair.

Details on how to assemble the chair are indicated in the instructions, if included.

How to make a baby high chair with your own hands?

How to remove and what is it

Hi.ru - what kind of virus is this?

Hi.ru is a virus that belongs to the subclass of adware. This program is installed on your computer without your notice, and then sets a new home page for your browser and inserts various advertisements into it.

Due to the presence of a virus program in the system registry, getting rid of Hi.ru is not an easy task. This malicious program in most cases enters the system when downloaded from unreliable game mod sites, various torrents, free programs and other free files. Website creators sometimes take this step by introducing malware into the installation file of the downloaded software.

A downloader is a program that transfers a downloaded file to the user, and at the same time can begin installing viruses that change the home page, set various redirects, place ads in browsers, and the like.

Hi.ru belongs to the list of these programs.

How to remove Hi.ru

In order to remove Hi.ru from a PC, you need to destroy all extensions in the browser with the name Hi.ru, all registry keys that are in some way associated with a malicious virus, and all virus files from the computer.
In most cases, simply removing the extension from the browser will make the program disappear until the next reboot.

The virus is automatically restored. You can remove all add-ons and extensions in browsers, find virus files and remove them yourself, remove it using the “Add or Remove Programs” function. The work will be useless. It is necessary to delete all registry branches, namely keys related to the malicious program; however, only well-trained people can carry out this action.

A minor mistake in cleaning the registry and OS will either function with constant errors, or will not load at all and you will still need to reinstall it.

In this regard, we advise only fairly experienced users to perform registry cleaning on their own; moreover, you carry out this operation at your own peril and risk. However, it is possible to omit this step thanks to the Enigma Software organization, which made the SpyHunter 4 utility, which makes it possible to clean the registry from the Hi.ru virus.

Remove Hi.ru automatically

Download Hi.ru removal tool

Why is Spyhunter better?

• Will clear all extensions and add-ons in browsers called Hi.ru.
• This utility will remove Hi.ru virus files from your computer.
• Will delete all registry keys associated with Hi.ru and delete only those. The computer registry will not be at risk of damage, operating system will work stably.
• Cleans other viruses and unwanted programs from your computer.
• Optimizes the computer, it will function faster.
• Provides your computer with protection against future threats.

Step-by-step instructions on how to remove Hi.ru from the browser start page on your computer

Let us repeat that this operation you are doing it at great risk. Each PC has its own OS with big amount differences.

Despite the fact that the most important folders, files, and registry keys are mostly identical, the presence of some program containing a registry key called Hi.ru (this is a common occurrence), and, accordingly, deletion can lead to failure of the OS .

Step 1. Make a restore point.

Be sure to make a restore point. You will not be able to restore your system if a restore point is not created.

1. Right-click on “Computer”, then “Properties”.
2. In the “System Protection” item, look for the “Create” button (the last button at the bottom right).
3. Come up with a name for the restore point, then click “Create”.

Step 2: Deleting files.

1. Open “My Computer”, then click on the “Uninstall or change a program” button at the top.
2. We look for “Hi.ru” in the list that appears and click delete on the right side.

Step 3. Clean the browser: remove extensions and add-ons.

Each browser has its own button to call up a list of extensions and add-ons.

Google chrome

Find Hi.ru and delete it.

Mozilla Firefox

In the upper right part, click on the menu icon – Add-ons, search for it and click Delete.

Internet explorer

Go to Tools - Configure add-ons. Find Hi.ru and delete it.

Step 4. Deleting keys in the system registry.

1. We press win + R, a line will appear, enter regedit in it, as a result the registry will open.
2. Press Ctrl+F, enter Hi.ru in the search line, press enter.
3. The same key comes out - delete it.
4. We continue the search using the F3 key. So we must delete everything that the search found, then a message will be displayed that nothing could be found.

Reboot the computer. After reboot, if the operating system does not boot:

1. When the screen is black, press f8 and f9 as quickly as possible to enter safe mode.
2. In the menu that appears, you need to select Safe Mode. Then we do this: Start – Accessories – System Tools – System Restore.

   In the window that appears, select the restore point that we created earlier and activate it.

3. It may happen that Safe Mode does not load. In this case, select line No. 1 in the menu, then restore the system based on the prompts.

How to remove the hi.ru virus if there are several viruses

In most cases, this is enough if the virus acts alone.

But viruses often infect a computer in groups: they can restore one another when at least one of the group has not been deleted.

For example, at the time of writing the article, the Hi.ru virus already has a large number of modifications. Therefore, it is safe to remove Hi.ru using the SpyHunter 4 utility. Thanks to this utility, you will be cleaned of this virus, as well as others that you may not know about. If Hi.ru is installed on your computer, a similar action can be performed by many identical infections.

Download Spyhunter

Is it worth removing such viruses?

Of course, you can use the computer with annoying ads, it’s not fatal.

However, the virus can open the way for other viruses from the manufacturer. In the meantime, they are updated and modified. As a result, the virus not only adds advertising browsers to the browser, but can also easily save your personal data: social networks, credit cards, email passwords and everything that you write on the infected computer. And this is many times more unpleasant than just advertising.

Video instructions for manually removing hi.ru from the browser

Please Like if the article helped you.

If you couldn't solve the problem, write to us, we will help!

Remove from browser (Instructions)
How to remove from browser The site opens.

How
How to remove - Most How to remove Grozza
30th week of pregnancy with photos and videos – Pregnancy by